Scribd
Upload
61 views

Lab Project Proposal:: 17-ME-100 (Hamza Nasir) 17-ME-16 (Usman Bin Ahmad) 17-ME-67 (Farhan)

This project proposal summarizes a student project to build an Arduino light sensor. The project will use a light dependent resistor and Arduino board to detect changes in light intensity and trigger a buzzer. Three group members are listed to work on the project. The proposal describes the circuit design and components, including an LDR and potentiometer, and explains how the sensor will detect light and control the buzzer. Potential applications of light sensors are also outlined.

Uploaded by

M.USMAN BIN AHMED
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
61 views

Lab Project Proposal:: 17-ME-100 (Hamza Nasir) 17-ME-16 (Usman Bin Ahmad) 17-ME-67 (Farhan)

This project proposal summarizes a student project to build an Arduino light sensor. The project will use a light dependent resistor and Arduino board to detect changes in light intensity and trigger a buzzer. Three group members are listed to work on the project. The proposal describes the circuit design and components, including an LDR and potentiometer, and explains how the sensor will detect light and control the buzzer. Potential applications of light sensors are also outlined.

Uploaded by

M.USMAN BIN AHMED
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

LAB PROJECT PROPOSAL

PROJECT TITLE:

GROUP MEMBERS:

17-ME-100 (Hamza Nasir)


17-ME-16 (Usman Bin Ahmad)
17-ME-67 (Farhan)
Arduino Light Sensor
A Light Sensor is a device that detects light. It generates an output signal that is proportional
to the intensity of light. A light sensor measures the radiant energy present in the wide range
of frequencies in the light spectrum. Some of the common frequencies are infrared, visible
and ultraviolet.

A Light Sensor is also called as Photo Sensor or Photo electric Sensor as it converts light
energy or photons in to electrical signals.

There are different types of light sensors for different applications. A Photocell or Photo
Resistor is the common type of light sensor.

A photo resistor changes its resistance when light is incident on it. Hence, a photo resistor is
also called as Light Dependent Resistor or LDR.

When there is no light, the resistance of LDR is very high. When there is light incident on the
LDR, its resistance decreases.

There are a wide range of applications of light sensors. The applications include scientific
research to everyday residential applications like security systems, burglar alarms garage
door openers, solar tracking systems etc.

In this project, a simple light sensor is designed using LDR. The project is built around
Arduino. The circuit, components and working are mentioned in the following sections.

 Table of Contents
 Circuit Diagram
 Hardware Required
 Component Description
o Light Dependent Resistor (LDR)
o 100 KΩ Potentiometer
o Arduino UNO
 Circuit Design of Light Sensor
 Working of Arduino Light Sensor
 Code
 Applications

Circuit Diagram:

Hardware Required
 Arduino UNO
 Light Dependent Resistor (LDR)
 100 KΩ POT
 Buzzer

Component Description:
Light Dependent Resistor (LDR)
An LDR is a type of variable resistor that change its resistance according to intensity of the
light incident on it. Generally, when the intensity of light is less i.e. in dark conditions, the
resistance of LDR will be in the order of Mega Ohms (MΩ).

As the intensity of the light increases, it resistance decreases and falls down to few Ohms at
maximum intensity of light.
Photo Resistors are semiconductor devices with photo sensitive cells. Photo cells are made
with different compounds depending on the frequency of the light and application they are
used.

Cadmium Sulphide cell based photo resistors are most common in consumer applications as
they are inexpensive. Some applications are night lights, alarm systems, solar tracking
systems etc.

Lead Sulphide and Indium Antimonide cell based photo resistors are frequently used for low
to mid infrared frequencies.

Germanium Copper cell based light dependent resistors are used in far infrared frequency
applications and they are used in infrared based astronomy and spectroscopy.

100 KΩ Potentiometer
This is a variable resistor whose resistance can be varied from 0Ω to 100 KΩ.

Arduino UNO
It is the main controlling part of the project. It has both analog and digital pins. It has 6
analog input pins and 14 digital I/O pins.

Circuit Design of Light Sensor


As the photo resistor or LDR is a variable resistor, a voltage divider network must be used to
gets the analog equivalent output from it.

A 100 KΩ POT and the LDR form a voltage divider and the output of the voltage divider is
given to the analog input A0 of Arduino.

A buzzer is connected to pin 11 of Arduino.

Working of Arduino Light Sensor


Light Sensors are very useful devices in wide range of applications. One of the common
application is an automatic night lamp, where a light bulb is automatically turned on as soon
as the sun sets down.

Another good application is solar tracker, which tracks the sun and rotates the solar panel
accordingly.
All these applications use a simple photo resistor or an LDR as the main sensing device.
Hence, in this project, we designed a simple light sensor that indicates when the light is
indicated. The working of the project is very simple and is explained below.

All the connections are made as per the circuit diagram. The code for Arduino is written and
dumped in the board. When the LDR detects a light over certain intensity, the Arduino will
trigger the buzzer. When the intensity of light decreases, the buzzer is turned off.

The 100 KΩ POT used in the voltage divider network can be used to adjust the intensity
levels at which the buzzer is triggered.

Applications
 Light Sensors are used in variety of applications.
 They can be used in security systems like burglar alarm systems where an alarm is
triggered when the light falling on the sensor is interrupted.
 Another common application of light sensor is night lamp. As long as the sun light falls
on the light sensor, the lamp will be switched off. When the sun light starts decreasing
and is completely off, the lamp will be turned on automatically.
 One of the important applications of light sensors is in generation of efficient solar
energy. Light sensors are often used in Solar Tracking systems. The solar panel will be
rotated according to the movement of the sun and its intensity.

---------------------------------------------------------------------------------

You might also like