^dͲϭ

Code No: V0121

II B.Tech II Semester (R07) Supply Examinations -Dec, 2009

PROBABILITY AND STATISTICS

(Common to CE, ME, CHEM, AME)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) Box A contains 5 red and 3 white marbles and box B contains 2 red and 6 white
marbles. If a marble is drawn from each box, what is the probability that they are
both of some color.
b) State and prove Baye’s theorem.

2. a) Five defective bulbs are accidentally mixed with twenty good ones. It is not possible to
just look at a bulb and tell whether or not it is defective. Find the probability distribution
of the number of defective bulbs, if 4 bulbs are drawn at random from this lot.
­2e − 2 x , for x > 0
b) If a random variable has the probability density f(x) as f ( x ) = ®
¯0 , for x ≤ 0
find the probabilities that it will take on a value (i) between 1 and 3 (ii) greater than 0.5.

3. a) Out of 800 families with 4 children each, how many families would be expected to have
(i) 2 boys and 2 girls (ii) at least one boy (iii) no girl (iv) at most 2 girls ? Assume equal
probabilities for boys and girls.
b) In a normal distribution, 31% of the items are under 45 and 8% are over 64. Find the
mean and standard deviation of the distribution.

4. a) A normal population has a mean of 0.1 and standard deviation of 2.1. Find the
probability that mean of a simple of size 900 will be negative.
b) Ten individuals are chosen at random from a population and their heights are found to
be in inches 63, 63, 64, 65, 66, 69, 70, 70, 71. Discuss the suggestion that the mean height
of universe is 65 for 9 degree of freedom t at 5% level of significance 2.262.

5. a) A random sample of 100 teachers in a large metropolitan area revealed a mean weekly
salary of Rs. 487 with a standard deviation Rs 48. With what degree of confidence can be
assert that the average weekly salary of all teachers in the metropolitan area is between
472 to 502?
b) If we can assert with 95% that the maximum error is 0.05 and p= 0.2, find the sample
size.

6. a) If 80 patient are treated with an antibiotic 59 got cured. Find a 99% confidence limits to
the true population of cure.
b) Write about null hypothesis and testing of null hypothesis.
ϭŽĨϮ
 ^dͲϭ
Code No:V0121

7. a) Two independent sample of sizes 7 and 6 had the following values

Sample A 28 30 32 33 31 29 34
Sample B 29 30 30 24 27 28 -
Examine whether the sample have been drawn from normal populations having the same
variance.
b) 4 methods are under development for making discs of a super conducting material.
Fifty discs made by each method and they are checked for super conductivity when cooled
with liquid
1st Method 2nd Method 3rd Method 4thMethod
Super conductor 31 42 22 25
Failures 19 8 28 25
Test the significant difference between the proportions of super conductors at 0.05 level.

8. a) Explain pure birth and pure death processes?

b) A self service canteen employs one cashier at its counter. Eight customers arrive for
every ten minutes on an average. The cashier can serve an average one per minute.
Assuming that the arrivals are poisson and the service time distribution is exponential;
determine (i) the average number of customers in the system, (ii) the average queue length
and (iii) the average time a customer spends in the system.

ϮŽĨϮ

 
 ^dͲϮ
Code No:V0121

II B.Tech II Semester (R07) Supply Examinations -Dec, 2009

PROBABILITY AND STATISTICS

(Common to CE, ME, CHEM, AME)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) ‘A’ and ‘B’ throw alternatively with a pair of ordinary dice. ‘A’ wins if he throws 6
before B throws 7 and B wins if he throws 7 before A throws 6. If A begins show that his
chance of winning is 30/61.
b) Three urns contain 6 red, 4 black; 4 red, 6 black; 5 red, 5 black balls respectively. One
of the urns is selected at random and a balls drawn from it. If the ball drawn is red, find
the probability that it is drawn from the first urns
2. a) A random variable x has the following probability
Function X : 0 1 2 3 4 5 6
P ( x ) : k 3K 5 K 7 K 9 K 11K 13K
(i) Find K (ii) Evaluate P(x<4), P(x
), P(3<6).

b) The probability density f (x) of a continuous random variable is given by

−x
f (x) = K e , − ∞ < x < ∞ find K, mean and variance of the distribution.
3 a) Assume that on the average one telephone number out of fifteen called between 2 P.M
and 3 P.M on week-days is busy. What is the probability that if 6 randomly selected
telephone numbers are called (i) not more than 3 (ii) at least 3 of them will be busy?
3
b) If a poisson distribution is such that P ( X = 1) = P ( X = 3) .
2
 find (i ) P( X ≥ 1)(ii ) P ( X ≤ 3)(iii ) P (2 ≤ × ≤ 5)

   and the variance

   what is the probability that  will be between 75 and
4. a) A random sample of size 100 is taken from an infinite population having the mean

78.
b) Find the probabilities that a random variable having the standard normal distribution
will taken on a value (i) between 0.87 and 1.28 (ii) between -0.34 and 0.62.
5. a) What is the maximum error one can expect to make with probability 0.90 when using

 =2.56.
the mean of a random sample of size n = 64 to estimate the mean of population with

b) The mean and the standard deviation of a population are 11,795 and 14054
respectively. If n=50, find 95% confidence interval for the mean.

ϭŽĨϮ

 
 ^dͲϮ
Code No:V0121

6. a) A manufacturer claims that only 4% of his products are defective. A random sample of
500 were taken among which 100 were defective. Test the hypothesis at 0.05 level.
b)) In a random sample of 60 worker ,the average time taken by them to get to work is

hypothesis     in favour of alternative null hypothesis     

33.8 minutes with a standard deviation of 6.1 minutes. Can we reject the null

  level of significance?

7. a) A random sample of six steel beams has a mean compressive strength of 58,392 p.s.i

the level significance    to test whether the true average compressive strength of
(pounds per square inch ) with a standard deviation of 648 p.s.i. Use this information and

the steel from which this sample came is 58,000 p.s.i Assume normality.
b) From the following data, find whether there is any significant liking in the habit of
taking soft drinks among the categories of employees

Soft drinks Clerks Teachers Officers

Pepsi 10 25 65
Thums up 15 30 65
Fanta 50 60 30

8. There are 3 typists in an office. Each typist can type an average of 6 letters per hour. If
letters arrive for being type at the rate of 15 letters per hour
a) What fraction of the time all the typists will be busy.
b) What is the average number of letter waiting to be typed.
c) What is the average time a letter has to spend for writing and for being type.
d) What is the probability that a letter will take longer than 20 minutes waiting to be type
and being type.

ϮŽĨϮ
 ^dͲϯ
Code No:V0121

II B.Tech II Semester (R07) Supply Examinations -Dec, 2009

PROBABILITY AND STATISTICS

(Common to CE, ME, CHEM, AME)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a)A problem in statistics is given to the 3 students A,B,C whose chances of solving it are
½, ¾ and ¼ respectively. What is the probability that the problem is solved?
b) The students in a class are selected at a random one after the other for an examination.
Find the probability that the boys and girls sit alternately if there are (i) 5 boys and 4 girls

2. a) Find the mean and variance of the uniform probability distribution given by  !"
(ii) 4 boys and 4 girls.

, for x = 1,2,3 - - n.
b) A random variable x has the following probability
Function X : 0 1 2 3 4 5 6 7
P ( x ) : 0 K 2 K 2 K 3K K 2 2 K 2 7 K 2 + K .
(i) Find K (ii) Evaluate P(x<6), P(x
6), P(3<6).
3. a) In a certain factory producing cycle tyres, there is a small chance of 1 in 500 tyres to be
defective. The tyres are supplied in lots of 10.Using poisson distribution, calculate the
approximate number of lots containing no defective, one and 2 defective tyres,
respectively in a consignment of 10,000 lots.

distributed. If 15% of the students
60 marks, 40% < 30 marks, find the mean and
b) The marks obtained in statistics in a certain examination found to be normally

A random sample of size 64 is taken from a normal population with   !# $

standard deviation.

% What is the probability that the mean of the sample will (i) exceed 52.9 (ii) fall
4.

between 50.5 and 52.3 (iii) be less than 50.6.

5. a) Write about (i)Null hypothesis, (ii) Type I and type II errors,(iii) Alternative hypothesis.
b) An ambulance service claims that it takes on the average less than 10 minutes to reach
its destination in emergency calls. A sample of 36 calls has a mean of 11 minutes and the
variance of 16 minutes. Test the significance at 0.05 level.
6. a) A random sample of size 81 was taken whose variance is 20.25 and mean 32. Construct
98% confidence interval.
b) Explain the method of maximum likelihood estimation by taking an example of
estimating the parameter of an exponential distribution.

ϭŽĨϮ
 ^dͲϯ
Code No:V0121

7. a) The heights of 10 males of a given locality are found to be 175,

168,155,170,152,170,175,160,160, and 165cms.Based on this, find the 95% confidence
limits for the height of males that locality.
b) Twelve dice were thrown 4096 times and a throw of 6 was considered a success. The
observed frequencies were as given below.
No. of successes 0 1 2 3 4 5 6 7
Frequency 447 1145 1180 796 380 115 25 8

and over test whether the dice were unbiased.

8 a) A TV repair man finds that the time spent on his jobs has an exponential distribution
with mean 30 minutes. He pairs sets in the order in which they arrive. The arrival of the
sets is approximately poisson with an average of 10 per an eight hour day. Find the
repairman’s idle time each day. How many jobs are ahead of the average set just brought
in?
b) Explain pure birth and pure death process?

ϮŽĨϮ
 ^dͲϰ
Code No:V0121
II B.Tech II Semester (R07) Supply Examinations -Dec, 2009

PROBABILITY AND STATISTICS

(Common to CE, ME, CHEM, AME)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

 &' ( )  &' * &) + &' , )

1. a) If A and B, C are any 3 events, then

&' ( ) ( -
 &' * &) * &- + &' , ) + &) , - + &- , '
* &' , ) , -

b) A business man goes to hotels X, Y, Z, 20%, 50%, 30%, of the time respectively. It is
known that 5%, 4%, 8%, of the rooms in X, Y, Z hotels faulty plumbings. What is the
probability that business man’s room having faulty is the plumbing is assigned to hotel Z.

2. a) A sample of 4 items is selected at random from a box containing 12 items of which 5

are defective. Find the expected number of defective items.

 01     2
/
b) Probability density function of a random variable x is

  .  3 41 5



0 and 2" .
Find the mean, mode and median of the distribution and also find the probability between

Find P6
! $ & 6  

3. a) The mean and variance of a binomial variable x with parameter n and p are 16 and 8.

b) If the masses of 300 students are normally distributed with mean 68 kgs and standard
deviation 3kgs. How many students have masses (i) Greater than 72kg (ii) Less than
(or)equal to 64kg (iii) Between 65 and 71kg inclusive.

   and the variance

   What is the probability that  will be between 75 and
4. a) A random sample of size 100 is taken from an infinite population having the mean

78.
b) The mean of certain normal population is equal to the standard error of the mean of the
samples of 64 from that distribution. Find the probability that the mean of the sample size
36 will be negative.

5. a) Write about one tailed and two tailed tests with example.
b) A sample of 400 items is taken from a population whose standard deviation is 10. The
mean of the sample is 40. Test whether the sample has come from a population with
mean 38. Also calculate 95% confidence interval for the population.
1 of 2
 ^dͲϰ
Code No:V0121

6. a) A random sample of size 100 is taken from a population with

 !. Given that the
sample mean is  = 21.6, construct  95% confidence interval for the population mean 
b) A random sample size 100 has a standard deviation of 5. What can you say about the
maximum error with 95% confidence?

7. a) The nicotine contents in milligrams in 2 samples of tobacco were found to be as

follows
Sample A 24 27 26 21 25 -
Sample B 27 30 28 31 22 36
Can it be said that 2 sample came from same normal population.
b) A random sample from a company’s very extensive files show that the orders for a

days. Use the level of significance  = 0.01 to test the claim that on the average such
certain kind of machinery were filled, respectively in 10, 12, 19, 14, 15, 18, 11, and 13,

orders are filled in 10.5 days. Assume normality.

8. Arrival rate of telephone calls at a telephone booth are according to poisson distribution
with an average time of 12 minutes between 2 consecutive call arrivals. The length of
telephone calls is assumed to be exponentially distributed with mean 4 minutes.
(i) Find the probability that a caller arriving at the booth will have to wait.
(ii) Find the average queue length that forms from time to time
(iii) Find the fraction of a day that the phone will be in use.
(iv) What is the probability that an arrival will have to wait for more than 15 min before
the phone is free.
(v) The telephone company will install a second booth.

ϮŽĨϮ
 ^dͲϭ
Code No: T0221
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

POWER SYSTEM-I
(Electrical and Electronics Engineering)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) What are the factors to be considered for selection of the site for a thermal power
station?
b) A steam power station has an overall efficiency of 20% and 0.6Kg of coal is burnt per
kWh of electrical energy generated. Calculate the calorific value of fuel.

2. Draw the schematic diagram of a nuclear power station and discuss its operation.

3. a) Derive an expression for the voltage drop for a uniformly loaded distributor fed at one
end.
b) How does A.C distribution differs from D.C distribution.

4. a) Describe briefly how will you solve a.c distribution problems.

b) A single phase distributor one km long has resistance and reactance per conductor of
0.1 ohm and 0.15 ohm respectively. At the far end, the voltage VB=200V and the current
is 100 A at a p.f of 0.8lagging. At the mid-point M of the distributor, a current of 100 A is
tapped at a p.f. of 0.6 lagging with reference to the voltage VM at the mid-point. Calculate
(i) Voltage at mid-point
(ii) Sending end voltage, VA

5. a) What is sub-station? Name the factors that should be taken care of while designing and
erecting a substation.
b) State the advantages of out-door sub-stations over in-door sub-stations.

6. a) Discuss the disadvantages of a low power factor?

b) What are the various methods of voltage control in a power system?

7. a) What do you understand by the load curve? What information’s are conveyed by a
load curve?
b) A generating station has a connected load of 43MW and a maximum demand of
20MW. The unit generated being 615x106 per annum. Calculate (i) demand factor
(ii) load factor.

8. Write short notes on

a) Simple tariff
b) Flate rate tariff
c) Three part tariff

1 of 1
 ^dͲϮ
Code No: T0221
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

POWER SYSTEM-I
(Electrical and Electronics Engineering)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. Briefly describe the main parts and the working of a steam power station with a neat
sketch.

2. a) What are the methods of producing nuclear reaction? What is chain reaction?
b) Explain the working of a gas turbine plant with a schematic diagram.

3. a) How are distribution systems classified?

b) Discuss the relative merits and demerits of underground and overhead systems.

4. a) What is the importance of load power factors in a.c. distribution systems.

b) A 500 m long single-phase A.C. distributor has a total impedance of (0.02+j0.04)ohm
and is fed from one end at 240V. It is loaded as follows:
50A at unity power factor, 200m from feeding point ;
100A at 0.8 p.f. lagging , 300m from feeding point ;
50A at 0.06 p.f. lagging at the far end.
Calculate: (i) Total voltage drop and (ii) voltage at the far end.

5. a) Discuss the different types of gas insulated sub-stations.

b) What are the considerations for the selection of site for an out-door sub-station.

6. a) Explain the causes of low power factor of the supply system?

b) Discuss the importance of voltage control in the modern power system.

7. Define and explain importance of the following

a) Connected load

b) Maximum load

c) Demand factor

8. a) Describe the desirable characteristics of a tariff?

b) What is mean by power factor tariff? What are its types?
1 of 1 
 ^dͲϯ
Code No: T0221
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

POWER SYSTEM-I
(Electrical and Electronics Engineering)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) What are the functions of economizer and super heater in a thermal power plant?
b) A thermal power stations ha the following data:
Max. demand =20,000KW, Load factor =40%
Boiler efficiency= 85%, Turbine efficiency =90%
Coal consumption= 0.9Kg/KWh , Cost of 1 ton of coal=Rs.300
Determine (i) thermal efficiency and (ii) coal bill per annum.

2. a) Discuss the advantages and disadvantages of Nuclear power station.

b) What are factors to be considered for the selection of site of a nuclear power station?

3. a) State the main types of distribution systems used and compare their applications.
b) What are the requirements of a distribution system?

4. a) Draw the phasor diagram of a.c. distributor power factor with respect to receiving end.
b) A single phase a.c. distributor AB 300 meters long is fed from end A and is loaded as
under:
(i) 100A at 0.707 p.f. lagging 200 m from point A
(ii) 200A at 0.8 p.f. lagging 300 m from point A
The load resistance and reactance of the distributor is 0.2 ohm and 0.1 ohm per kilometer.
Calculate the total voltage drop in the distributor. The load power factors refer to the
voltage at the far end.

5. What are the different types of bus-bar arrangements used in sub-stations? Illustrate your
answer with suitable diagram.

6. (a) Derive an expression for the most economized of power factor which may be attained
by a consumer.
(b) Explain the purpose of Booster transformer? What are its limitations?

7. Explain briefly (i) Load duration curve

(ii) Load curve
(iii) Plant use factor.

8. Describe some of the important types of tariffs commonly used?

1 of 1

^dͲϰ
Code No: T0221
II B.Tech II Semester (R07) Supply Examinations, Dec-2009

POWER SYSTEM-I
(Electrical and Electronics Engineering)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks


1. a) What are the advantages and disadvantages of a thermal power station?

b) How the coal is utilized in power generation? Describe how it is handled starting from
delivery of coal to final combustion stage.

2. What are the basic components of nuclear reactor? Explain the function of each
component.

3. a) Give the comparison between over head system and underground system.
b) Write short notes on Ring main distributer.

4. a) What is the method of calculations in A.C. distribution?

b) A single phase distributor 2 kilometers long supplies a load of 120 A at 0.8 p.f. lagging
at its far end and a load of 80 A at 0.9 p.f. lagging at its mid-point. Both power factors are
referred to the voltage at the far end. The resistance and reactance per Km (go and return)
are 0.05ohm and 0.1 ohm respectively. If the voltage at the far end is maintained at 230V,
calculate the voltage at sending end.

5. a) Give the comparison of out-door sub-stations and in-door sub-stations.

b) What ate advantages of Gas insulated sub-stations

6. a) Discuss the various methods for power factor improvement?

b) Explain with a neat sketch on-load tap changing transformer.

7. Define the following

(i) Diversity factor
(ii) Utilization factor
(iii) Load factor.

8. a) What do you understand by tariff? Discuss the objectives of tariff.

b) What is mean by two-part tariff? What are the advantages and disadvantages of two-
part tariff?

1 of 1
Code No: V0421 ^dͲϭ

II B.Tech II Semester (R07) Supply Examinations, D

Dec- 2009

PULSE AND DIGITAL CIRCUITS

(Common
Common to ECE
ECE, BME, E.CON.E, ECC, ICE)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
___________________________________________________
______________________________________________________________________________
___________________________

1. a) A symmetrical square – wave of peak-to-peak amplitude V and frequency f is applied

appli
to a high-pass
pass RC circuit. Show that the percentage tilt is given by
−1
2 fRC
1− e
P= −1
× 200%
2 fRC
1+ e
T
If the lilt is small, show that this reduces to the following form P = × 100%
2 RC
b) A square wave whose peak peak-to-peak amplitude is 2V extends ±1V 1V with respect to
ground.. The duration of the positive sesection
ction is 0.1 sec and that of the negative section
0.2sec. If this waveform is impressed upon an RC integrating circuit whose time constant
is 0.2 sec. Whathat are the steady-state
state maximum and minimum values of the output
waveform. (8+8M)

2. a) Explain the working of a two

two-level
level diode clipper with the help of circuit diagram,
diagra
waveforms and transfer character
characteristics.
b) Assume that the diodes are ideal. Make a plot of v0(t)against vi(t) for the range of vi(t)
from 0 to 150V. Indicate all slopes and voltage lev
levels. Indicate, for eachch region, which
diodes are conducting. (8+8M)

3. a) Discuss the switching times of a transistor

ϭŽĨϮ
Code No: V0421 ^dͲϭ

b) If silicon transistor in figure has a minimum value of hFE of 40, find the output levels
for input levels of 0 and 15V. Prove that it works as Inverter. (8+8M)

Figure: Inverter circuit

4. a) Draw the circuit diagram of collector-coupled monostable multivibrator and explain
the operation with the help of base and collector wwaveforms.
b) The fixed-bias
bias binary uses nn-p-n silicon transistors with (hFE)min =25. The circuit
parameters are VCC =10V, VBB= 2V, RC =1K Ω , R1= 5K Ω and R2 =10K = Ω ,VCE(sat)=
0.3V and VBE(sat)=0.7V. Verif
Verify that one transistor is in cut-off
off and the other in saturation
and find the stable state currents and voltages. (8+8M)


5. a) What are the methods of generating a time base waveform? Explain each method.
metho
b) Derive the expressions for sweep speed error, displacement error and transmission
error of exponential sweep circuit. (8+8M)

6. a) With the help of a neat

eat circuit diagram and waveforms, explain synchro
nchronization with
frequency division of sweep circuit with pulse sign
signals.
b) What is relaxation oscillator?
scillator? Explain pulse synchronization of relaxation oscillator
o
with necessary diagrams. (8+8M)

7. a) What is pedestal? Illustrate the effect of control voltage on gate output.

b) Draw the circuit diagram of the unidirectional
ional diode gate with more two inputs and
explain its operation. (8+8M)

8. a) Compare different logic families. (8+8M)

b) Draw the output of X for the given inputs

ϮŽĨϮ
Code No: V0421 ^dͲϮ

II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

PULSE AND DIGITAL CIRCUITS

(Common to ECE, BME, E.CON.E, ECC, ICE)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
______________________________________________________________________________
1. a) Derive an expression for the output of a high-pass RC circuit excited by an
exponential input.
b) A square wave whose peak-to-peak amplitude is 4V extends ±2V with respect to
ground. The duration of the positive section is 0.3sec and that of the negative section
is 0.1sec. If this waveform is impressed on an RC differentiating circuit whose time
constant is 0.3sec, find the steady-state maximum and minimum values of the output
waveform. (8+8M)

2. a) Explain the working of a transistor clipper with the help of necessary diagrams.
b) For the diode clipping circuit of figure shown below assume that VR= 10V, Vi(t) =
20 sin wt, and that the diode forward resistance is Rf = 100 Ω while Rr =10K Ω and
Vr = 0. Neglect all capacitances. Draw to scale the input and output waveforms and
label the maximum and minimum values if (i) R=100 Ω , (ii) R= 1K Ω , and (iii)
R=10K Ω . (8+8M)

3. a) Discuss the switching times of a junction diode.

b) Design a transistor switch with the following data: VCC = 10V; VBB=6V; (hFE)min=
40, Icsat = 5mA ; the input is varying between 0 and 10V. The transistor is silicon
NPN type. Consider junction voltages. (8+8M)

4. a) Draw the circuit diagram of collector-coupled Astable multivibrator and explain its
operation with the help of base and collector waveforms.
b) Design a collector-coupled bistable multivibrator with the following
specifications. Vcc= 10V; VBB= 6V, Icsat =5mA; neglect IcBO, the transistor is silicon
NPN type. Assume junction voltages. Find R1, R2 and RC. (8+8M)
5. a) What is a linear time base generator?
b) Write the applications of time base generator
ϭŽĨϮ


 ^dͲϮ
Code No: V0421

c) Define sweep speed error

error, displacement error and transmission error of voltage
voltag
time base waveform. (5+5+6M)

6. a) What is synchronization
synchronization? What is synchronization on a one-to-one
one basis? What is
synchronization with frequency division? Give an example of synchronization with
frequency division.
b) A free-running
running relaxation oscillator has a peak-to-peak signal
al amplitude of 100V
and a period of 1200 µ sec synchronizing pulses are applied of such amplitude that
the switch break
reak down voltage is lowered by 50V at each pulse. The sync pulse
frequency is 4kHz.What
Hz.What are the amplitude and frequency of the synchronized
oscillator waveform? (8+8M)

7. a) What is a sampling gate?

b) Illustrate
ate the principle of sampling gates with series and parallel switches and
compare them.
c) Draw the sampling gate with four diodes and expl
explain its operation. (4+4+8M)

8. a) What are different logic systems

systems? Explain them.
b) Draw the output waveform X for the inputs A and B (8+8M)

ϮŽĨϮ 
Code No: V0421 ^dͲϯ

II B.Tech II Semester (R07) Supply Examinations, D

Dec- 2009

PULSE AND DIGITAL CIRCUITS

(Common
Common to ECE
ECE, BME, E.CON.E, ECC, ICE)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
___________________________________________________
______________________________________________________________________________
___________________________

1. a) Derive an expression for the output of a high

high-pass
pass circuit excited by a ramp input
b) The limited ramp is applied to an RC high
high-pass
pass circuit. Draw to scale the output
waveform for the cases (i) T=RC, (ii) T=0.2RC and (iii) T = 5RC. (8+8M)

2. a) Describe the operation of a simple clamper with the help of necessary diagrams.
b) In the d.c. restorer circuit, Rs= 5K Ω , R= 15K Ω , Rf = 100 Ω , Rr=∞= ,Vr= 0 and
C = 0.5µF The input vs(t) = 0 for t < 0 and for t > 0 is a square-wavewave of frequency
5KHz and makes excursions between 0 and 10V. The capacitor is initially uncharged.
Draw the output waveform for the first three cycles, lab labelling all voltage levels and
time constants. (8+8M)

3. a) Discuss the switching characteristics of junctio

junction diode.
b) Design a transistor switch with the following data:
VCC = 12V; VBB=8V, 8V, ((hFE)min=30, Icsat = 5mA . The input is varying
ying between 0 and
12V. The transistor is silicon NPN type
type. Consider junction voltages. (8+8M)

4. a) Derive expressions for V1 (upper trigger potential) and V2 (lower trigger

tri potential)
of Schmitt trigger.
b) Design a collector
collector–coupled monostable multivibrator
vibrator using n-p-n
n silicon
transistors. Neglect IcBO. Assume junction voltages.(hFE)min = 30, VBE = -1V for the
transistor in cut-off
off .VCC =VBB= 10V, Icsat = 8mA. The gate width T=2msec.Find
=2msec.Find RC ,
R1 , R2 and R. (8+8M)
ϭŽĨϮ

Code No: V0421 ^dͲϯ


5. a) Draw the circuit diagram of UJT sweep circuit and explain its working with
waveforms.
b) Explain the basic principle of miller and Bootsteap time base generators and derive
the equations for sweep speed-error. (8+8M)

6. a) What is phase delay and phase filter?

b) Explain with the help of block diagram and waveforms for achieving division of
relaxation devices without phase filter.
c) Write the factors which influence the stability of a relaxation divider. (4+6+6M)
7. a) Write the advantages and disadvantages of unidirectional diode gate.
b) How do you overcome the loading effect of signal sources on control voltages?
c) Draw the circuit diagram of a sampling gate with more than one control voltage
and explain its working. (6+5+5M)

8. a) Draw the circuit diagram of diode-resistor logic AND gate and explain its
operations
b) Draw the output waveform X for the given inputs (8+8M)

ϮŽĨϮ
Code No: V0421 ^dͲϰ

II B.Tech II Semester (R07) Supply Examinations, D

Dec- 2009

PULSE AND DIGITAL CIRCUITS

(Common
Common to ECE
ECE, BME, E.CON.E, ECC, ICE)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
___________________________________________________
______________________________________________________________________________
___________________________
1. a) Derive an expression for the percentage tilt of the output of a high--pass circuit with
large time constant excited by a symmetrical square wave with zero average value.
b) The input to a high-pass
pass RC circuit is periodic and trapezoidal as indicated.
indi Assume
that the time constant RC is large compared with ei either T1or T2. Find and sketch the
steady the state output if RC =10 T1 = 10 T2. (8+8M)

2. a) State and prove clamping circuit theorem.

b)) In the clamping circuit, Rs= 100 Ω , Rf =50 Ω , R=100K Ω and C = 2µF. 2 A
symmetrical squarere wave signal of amplitude 20V and frequency 5KHz is applied at t=0.
Draw the first three cycles of the output waveform. (8+8M)

3. a) Discuss the switching characteristics of a transistor.

b) In a transistor Inverter circuit, the transistor is silicon NPN type. RC = 2.2k
2.2 Ω ,
R1 = 15k Ω , R2 = 100k Ω ,VCC = VBB=10V, (hFEmin) = 50.. Consider junction voltages.
The input is varying
arying between 0 and 10V. Show that it works as Inverter. (8+8M)

4. a) Draw the
he circuit diagram of a non-saturated binary and explain its operation.
b) Compute the voltage levels for the base and collector waveforms of collector-coupled
coll
monostable multivibrator whose components and supplsupply voltages are as follows:
VCC = 12V; VBB= 3V; VBEsat = 0.7V and VCEsat= 0.3V , RC = 2K Ω , R= 20K Ω ,
R1= 20K Ω , R2 = 20K Ω , rbb1 = 100 Ω , Neglect IcBO. Silicon transistors are used with
hFE min= 50. (6+10M)

5. a) Draw a simple
le current sweep circuit and ex
explain
plain its working with the help of diagrams.
b) With the help of neat
eat diagrams explain the working of transistor Bootsteap
Bootstea time base
generator. (6+10M)
ϭŽĨϮ
Code No: V0421
^dͲϰ


6. a) Explain with neat diagrams

diagrams,, the synchronization of a sweep circuit with symmetrical
symme
signals.
b) A UJT sweep operates with a valley voltage VV =12V, and a peak voltage Vp = 15V. A
sinusoidalal synchronization voltage of 2V peak is applied between bases. The standoff
ratio is η = 0.6. Iff the natural frequency of the sweep is 1000Hz, ove
overr what range of sync-
signal frequency will the sweep remain in 1:1 synch
synchronism
ronism with the sync signal?
(8+8M)

7. a) With the help of neat diagrams explain the worki

working of bidirectional diode gate and
derive the expression to control voltages and gain.
b) Draw the bidirectional gate using transistor and explain its working. (8+8M)

8. a) Draw the circuit diagram of diode-transistor logic NAND gate explain its operation.
b) Draw the output X for the given inputs (8+8M)

ϮŽĨϮ
 ^dͲϭ
Code No:V0521
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

SOFTWARE ENGINEERING
(Common to CSE, IT)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks


1. a) Explain about different software myths?

b) Write short notes on evolution of software.

2. Explain about linear sequential model with neat diagram.

3. a) What is meant by Requirements analysis? Explain?

b) Explain about context model with examples.

4. Explain about different design concepts with examples.

5. a) Differentiate between white-box-testing & Black-box-testing.

b) Explain about system Testing.

6. a) Explain about function – oriented Metrics.

b) Write a short notes on software Risks.

7. Explain about object oriented design process.

8. Explain about the following

a) SQA activities.
b) Software reliability
c) SQA plan.

1 of 1
 ^dͲϮ
Code No:V0521

II B.Tech II Semester (R07) Supply Examinations,Dec-2009

SOFTWARE ENGINEERING
(Common to CSE,IT)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks


1. a) Explain how Software Engineering practices are adopted to the industry?

b) Explain about the Applications of Software.

2. Explain about the incremental process model with a neat diagram.

3. a) Explain about the Requirements Validation.

b) Explain about Behavioral model with examples.

4. Explain about different design concepts with examples.

5. Explain about Black-box-testing.

6. a) Give the outline for RMMM plan.

b) Explain about Risk identification.

7. Explain about User interface analysis & design.

8. Explain about the following

a) Cost of Quality.
b) ISO 9000 Quality Standards.
c) SQA plan.









1 of 1
 ^dͲϯ
Code No:V0521

II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

SOFTWARE ENGINEERING
(Common to CSE,IT)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) Explain about different Software Engineering myths.
b) Explain about changing nature of Software.

2. a) Differentiate between functional & non-functional requirements of Software.

b) Explain about Software requirement document.

3. a) What is meant by Requirements elicitation? Explain?

b) Explain about different structured methods.

4. a) Do you design software when you “ write “ a program? What makes software design
different from coding?
b) Explain about Architectural design process.

5. a) Who should perform the Validation test – the software developer or the Software
User? Justify your answer?
b) What are the general characteristics for software testing?
c) Explain about Validation Testing.

6. a) Explain about Extended function point Metrics.

7. Explain about User interface analysis & design.

8. Explain about the following

a) Statistical Quality Assurance.
b) SQA plan.
c) Formal Technical Reviews.





1 of 1
 ^dͲϰ
Code No:V0521
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

SOFTWARE ENGINEERING
(Common to CSE, IT)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks

1. a) Explain about the evolving role of Software?
b) Explain how Software Engineering Practices are adopted to the industry?

2. Explain about the Incremental Process model with a neat diagram.

3. a) Explain about Feasibility study of requirements engineering process.

b) Explain about Object models with examples.

4. a) Provide examples of three data abstractions & the procedural abstractions that can be
used to manipulate them.
b) Explain about the set of principles for data specification.

5. a) Differentiate between Verification & Validation? Do both make use of test case design
methods and testing strategies.
b) Explain about White – box- testing.

6. a) Explain about size-oriented Metrics.

b) Explain about Risk Projection.

7. Explain about Object oriented design process.

8. Explain about the following

a) Quality Concepts.
b) ISO 9000 Quality Standards.
c) Formal Technical Review.

1 of 1



Code No: T1021/R07 Set No. 1
II B.Tech II Semester Supplementary Examinations, December 2009
CALIBRATION AND ELECTRONIC MEASUREMENTS
(Electronics & Instrumentation Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. Six determinations of a quantity as entered on the data sheet and presented for
analysis are 12.35, 12.71, 12.48, 10.24, 12.63 and 12.58. Calculate

(a) the arithmetic mean

(b) the deviation from the mean
(c) the average deviations
(d) Standard deviation
(e) Variance
(f) Probable error. [16]

2. (a) Describe the international standard of mass, length and volume?

(b) State the SI units, unit symbols and define each unit for the following
i. Electric current
ii. Charge
iii. Voltage
iv. Resistance. [8+8]

3. (a) Write short notes on the concept of traceability?

(b)
SCALE READING PRECISION VOLTAGE CORRECTION
100 103 +3
90 93 +3
80 82.5 +2.5
70 72.5 +2.5
60 62 +2
50 51.7 +1.7
40 41.5 +1.5
30 31 +1
20 19.7 -0.3
10 9.5 -0.5
0 0 0

For the 30 and 70 readings in the calibration chart shown above determine the
instrument accuracy as a percentage of the reading and as a percentage of full
scale? [8+8]

1 of 2
Code No: T1021/R07 Set No. 1
4. (a) Explain the successive approximation type DVM?
(b) Distinguish between series and shunt type ohmmeter from the dial calibration?
How can you estimate the internal resistance of an ohmmeter from its dial?
[8+8]

5. (a) Explain how a Kelvin’s double bridge can accurately measure low resistances.
Also derive the condition for balance.
(b) In the Kelvin’s Bridge shown in figure 1 the ratio of Ra to Rb is 2000Ω,R1 is
10Ω and R1=0.2 R2. Calculate the value of Rx . [10+6]

Figure 1:

6. (a) With a suitable block diagram and waveforms explain the operation of a fre-
quency counter.
(b) How many displays (total decades) should a frequency counter have if its
accuracy and resolution are to be 0.001 percent? [3+3+4+6]

7. (a) Draw the simplified block diagram of the sampling oscilloscope and explain
with the waveforms .
(b) Write short notes on the synchronization of the sweep. [3+5+2+6]

8. (a) With a schematic diagram explain the operation of pulse duration modula-
tion(PDM) recording system.
(b) Draw the block diagram of a logic analyzer and explain its operation. [8+2+6]

?????

2 of 2
Code No: T1021/R07 Set No. 2
II B.Tech II Semester Supplementary Examinations, December 2009
CALIBRATION AND ELECTRONIC MEASUREMENTS
(Electronics & Instrumentation Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. Write short notes on any of the F OU R:

(a) Arithmetic mean

(b) Deviation from the mean
(c) Average deviation
(d) Standard deviation
(e) Variance. [16]

2. (a) What are the differences between International and absolute standards?
(b) Describe the international standard of length and volume?
(c) Define the seven base units of SI system [4+4+8]

3. (a) Explain the following terms:

i. Accuracy
ii. Bias
iii. Calibration
iv. Calibration interval.
(b)
SCALE READING PRECISION VOLTAGE CORRECTION
100 103 +3
90 93 +3
80 82.5 +2.5
70 72.5 +2.5
60 62 +2
50 51.7 +1.7
40 41.5 +1.5
30 31 +1
20 19.7 -0.3
10 9.5 -0.5
0 0 0

For the 20 and 60 readings in the calibration chart shown above determine the
instrument accuracy as a percentage of the reading and as a percentage of full
scale? [8+8]

1 of 2
Code No: T1021/R07 Set No. 2
4. List out the different types of DVM’s and write short notes on each of them briefly?
[16]

5. (a) Explain how a simple AC bridge circuit operates and derive an expression for
the unknown parameters.
(b) The ac bridge of figure 1 is in balance with the following constants arm AB,
R=200Ω; arm BC R=100Ω in series with L=20 mH ; arm CD, unknown ; arm
DA, R=50Ω in series with C=0.1µF. The oscillator frequency is 10 KHz.Find
the constants of arm CD. [8+8]

Figure 1:

6. (a) When is period measurement preferred over frequency measurement and ob-
tain the condition ?
(b) With a suitable block diagram explain the operation of a pre scaled frequency
counter. [4+4+8]

7. (a) Describe the electrostatic focusing system of a CRT.

(b) What is the minimum distance L, that will allow full deflection of 4 cm at the
oscilloscope screen with a deflection factor of 100 V/cm and with an acceler-
ating potential of 2000 V ? [8+8]

8. (a) Explain the operating principle of LCD display.

(b) Draw the block diagram of a logic analyzer and explain its operation.[4+4+3+5]

?????

2 of 2
Code No: T1021/R07 Set No. 3
II B.Tech II Semester Supplementary Examinations, December 2009
CALIBRATION AND ELECTRONIC MEASUREMENTS
(Electronics & Instrumentation Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. (a) What are the different types of systematic errors present? Explain each of
them with an example?
(b) A voltmeter having a sensitivity of 1KΩ/V is connected across an unknown
resistance in series with a milli ammeter reading 80V on 150V scale. When
the milli ammeter reads 10mA, calculate the
i. Apparent resistance of the unknown resistance
ii. Actual resistance of the unknown resistance
iii. Error due to the loading effect of the voltmeter. [8+8]

2. (a) Distinguish between secondary standards and working standards

(b) What are the international standards of mass and volume?
(c) Write short notes on the seven base units of SI system. [4+4+8]

3. (a) Explain the following terms

i. Measurement and test equipment
ii. Traceability
iii. Reliability
iv. Tolerance limits
(b) Explain the procedure that should be followed before attempting to calibrate
deflecting instruments? [8+8]

4. (a) Describe the working principle of integrating type DVM?

(b) Write short notes on shunt type ohmmeter? [8+8]

5. (a) Explain how a Kelvin’s double bridge can accurately measure low resistances.
Also derive the condition for balance.
(b) In the Kelvin’s Bridge shown in figure 1 the ratio of Ra to Rb is 2000Ω,R1 is
10Ω and R1=0.2 R2. Calculate the value of Rx . [10+6]

6. (a) Distinguish between time and phase measurements?

(b) Explain any two methods generally used to extend the frequency range of a
frequency counter? [6+5+5]

7. (a) Draw the block diagram of vertical amplifier and explain its working.
(b) Briefly summarize the characteristics of commonly used Phosphors in Cathode
ray oscilloscopes. [8+8]

1 of 2
Code No: T1021/R07 Set No. 3

Figure 1:

8. (a) With a neat sketch explain the operation of Magnetic recorder . [8]
(b) Explain the operating principles of LCD display. [8]

?????

2 of 2
Code No: T1021/R07 Set No. 4
II B.Tech II Semester Supplementary Examinations, December 2009
CALIBRATION AND ELECTRONIC MEASUREMENTS
(Electronics & Instrumentation Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. (a) Define the following terms:

i. Absolute error
ii. %Error
iii. Precision
iv. % of accuracy.
(b) What are the four sources of possible errors in instruments and explain each
of them briefly? [8+8]
2. (a) Explain the concept of capacitance standards?
(b) Define the seven base units of SI system? [8+8]
3. Write short notes on different types of calibrations used? [16]
4. (a) A dual slope integrating type A/D converter has an integrating capacitor of
0.01µf and a resistance of 10 KΩ. If the reference voltage is 2V and output of
an integrating is not to exceed 10V what is the max time the reference voltage
can be integrated?
(b) Explain the performance characteristics of DVM‘s? [8+8]
5. (a) Explain how a Kelvin’s double bridge can accurately measure low resistances.
Also derive the condition for balance.
(b) In the Kelvin’s Bridge shown in figure 1 the ratio of Ra to Rb is 2000Ω,R1 is
10Ω and R1=0.2 R2. Calculate the value of Rx . [10+6]

Figure 1:

1 of 2
Code No: T1021/R07 Set No. 4
6. (a) What is an electronic counter? How can it be used for the measurement of
the following.
i. Average time period mode
ii. Totalizing.
(b) What is trigger level errors and suggest the means to obtain the maximum
accuracy. [2+6+2+2+2+2]

7. Describe the following:

(a) Sources of synchronization

(b) Blanking circuit
(c) Focus control [6+4+6]

8. (a) Explain the operation of logic timing analyzer and logic state analyzer.
(b) What are the merits and demerits of Magnetic recording? [5+5+6]

?????

2 of 2
Code No: T2121/R07 Set No. 1
II B.Tech II Semester Supplementary Examinations, December 2009
MATHEMATICS FOR AEROSPACE ENGINEERS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1
1. (a) Prove that √
1−2tx+t2
= P0 (x) + P1 (x) t + P2 (x) t2 + ....
(b) Write J5/2 (x) in finite form. [8+8]

2. (a) Derive Cauchy Riemann equations in polar coordinates.

(b) Prove that the function f(z) = z̄ is not analytic at any point.
√
(c) Find the general and the principal values of (i) log e (1+ 3i) (ii) log e (–1).
[5+5+6]
3
3. (a) Expand as a Taylor series in f(z) = 2z +1
z 2 +1
about z=1.
z
(b) Express f(z) = (z−1) (z−3)
in a series of positive and negative powers of (z-1).
[8+8]

4. (a) Find the poles and the residues at each pole of f (z) = 1−e
z
z4
where z=0 is a
pole of order 4
R (z−3
(b) Evaluate z2 +2z+5) dz where c is the circle using residue theorem.
c

i. | z | = 1
ii. | z+1-i | = 2. [6+10]

5. (a) Show that the image of the hyperbola x2 -y2 =1 under the transformation
w=1/z is r2 = cos 2θ.
2z+3
(b) Show that the transformation u = z−4
changes the circle x2 + y2 –4x = 0
into the straight line 4u+3=0. [8+8]

6. (a) A covariant tensor has components 2xz, x2 y, yz in cartesian coordinate system.

Find its components in cylindrical coordinates.
(b) Show that the any inner product of the tensors Apr and Btqs is a tensor of rank
three. [8+8]

7. (a) Two cards are selected at random from 10 cards numbered 1 to 10. Find the
probability that the sum is even if
i. the two cards are drawn together
ii. the two cards are drawn one after the other with replacement.
(b) State and prove Baye’s theorem.

1 of 2
Code No: T2121/R07 Set No. 1
5 3 2
(c) The probabilities of A,B,C to become M.D’S of a factory are 10 , 10 , 10 The
probabilities that bonus scheme will be introduced if they become M.D’s are
.02, .03 and .04. Find the probabilities A,B,C to be become M.D’s if bonus
scheme introduced. [5+5+6]

8. (a) If X is a 
continuous random variable with distribution.
1
6
x+k if 0 ≤ x ≤ 3
f (x) =
0 elsewhere

determine
i. the value of k
ii. the mean
iii. P(1 ≤ x ≤ 2).
(b) Derive the formula to find the mean and variance of Binomial distribution.
[8+8]

?????

2 of 2
Code No: T2121/R07 Set No. 2
II B.Tech II Semester Supplementary Examinations, December 2009
MATHEMATICS FOR AEROSPACE ENGINEERS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. Evaluate using β − Γ functions.

R1
(a) x2 (log x1 )3 dx.
0
π/2
sin7/2 θ cos3/2 θ dθ.
R
(b)
0
R1
(c) Show that (1 + x)m−1 (1 − x)n−1 dx = 2m+n+1 β(m, m). [5+5+6]
−1

2. (a) State necessary condition for f ( z ) to be analytic and derive C-R equations
in Cartesian coordinates.
(b) If u and v are functions of x and y satisfying Laplace’s equations show that
(s+it) is analytic where s = ∂u
∂y
∂v
− ∂x andt = ∂u
∂x
∂v
+ ∂y . [8+8]
R ( z 3 −sin 3z dz)
3. (a) Evaluate (z− π2 )3
with C: | z | = 2 using Cauchy’s integral formula.
C
(1,1)
(3x2 + 4xy + ix2 ) dz along y=x2 .
R
(b) Evaluate
(0,0)
dz
R
(c) Evaluate ez (z−1)3
where C: | z | = 2 Using Cauchy’s integral theorem. [5+5+6]
C

R2π dθ
4. (a) Evaluate by residue theorem (2+cosθ)
.
0
R∞ x2 dx
(b) Use the method of contour integration to evaluate (x2 +a2 )3
. [8+8]
−∞

5. (a) Under the transformation w=1/z, find the image of the circle |z-2i|=2.
z−i
(b) Under the transformation w = 1−iz
, find the image of the circle |z|=1 in the
w-plane. [8+8]

6. If (ds)2 = (dr)2 + r2 (dθ)2 + r2 sin2 θ(dφ)2 , find the values of

   
(a) 22, 1 and 13, 3
   
1 3
(b) and [8+8]
22 13

7. (a) If A and B are two events and P(A) = 3/5, P(B)=1/2 prove that

1 of 2
Code No: T2121/R07 Set No. 2
i. P(AUB) ≥ 35
1
ii. 10 ≤ P (A ∩ B) ≤ 12 .
(b) An integer is chosen at random from the first 200 positive integers. What is
the probability that the integer chosen is divisible by 6 or 8.
(c) There are 3 boxes. Box-I contains 7 Red, 3 Black, and 4 White balls, box -II
contains 9 Red, 2 Black, 4 White, box-III 10 Red, 5 Black, 5 white balls. One
box is chosen and one ball is drawn from it. What is the probability that the
ball is
i. Red
ii. Black
iii. White. [5+5+6]
3
8. (a) If a Poisson distribution is such that P(x=1). 2
= P(x=3).
Find
i. p(x ≥1)
ii. p(x ≤ 3)
iii. p(2≤ x ≤ 5).
(b) A sales tax officer has reported that the average sales of the 500 business that
he has to deal with during a year is Rs.36,000 with a standard deviation of
10,000. Assuming that the sales in these business are normally distributed,
find
i. the number of business as the sales of while are Rs.40,000
ii. the number of business the sales of while are likely to range between
Rs. 30,000/- and Rs.40,000/-. [8+8]

?????

2 of 2
Code No: T2121/R07 Set No. 3
II B.Tech II Semester Supplementary Examinations, December 2009
MATHEMATICS FOR AEROSPACE ENGINEERS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

1. Evaluate the following using β − Γ functions.

R1
(a) (x log x)3 dx
0
π/2
sin11 θ cos3 θdθ
R
(b)
0
R∞ 2
(c) x6 e−3x dx. [5+5+6]
0

2. (a) Show that w = z n (n , a positive integer) is analytic and find it’s derivative.
(b) If w = f(z) is an analytic function, then prove that the family of curves defined
by u(x,y) = constant cuts orthogonally the family of curves v(x,y) = constant.
(c) If α + iβ = tanh (x + i π/4) prove that α2 + β 2 =1. [6+5+5]
R
3. (a) Show that (z + 1) dz = 0 where C is the boundary of the square whose
C
vertices at the points z = 0, z = 1, z = 1+i, z = i.
R 2
(b) If F(a)= 3z +7z+1)dz
(z−a)
using Cauchy’s integral formula where C is |z| = 2 find
C
F(1) F(3) F 00 (1-i). [8+8]
z3
4. (a) Find the poles and the corresponding residues of the function (z−1)(z−2)(z−3)
.
(b) Evaluate (3z+5)dz
R
(z 2 −1)2
where C is |z| = 1 by residue theorem. [8+8]
C

5. (a) Discuss the transformation w=cos z.

(b) Find the bilinear transformation which maps the points (l, i, -l) into the points
(o,1,∞). [8+8]
6. (a) Prove that Apq B p cq is an invariant if B p and C q are contra variant tensors and
Apq is covariant tensor.
(b) If (ds)2 = (dr)2 + r2 (dθ)2 + (r2 sin2 θ)(dφ)2 then prove that
 
1
i. = [22, 1] = −r
22
ii. 13, 3 = rsin2 θ.
 
[6+10]
7. (a) Out of 10 girls in a class , 3 have blue eyes. If 2 of the girls are chosen at
random, what is the probability that

1 of 2
Code No: T2121/R07 Set No. 3
i. both have blue eyes
ii. at least one has blue eyes.
(b) Define conditional probability. Give an example. State the general multiplica-
tive rule and special multiplication rule ( when the events are independent).
[8+8]

8. (a) For the continuous probability function f(x) = kx2 e−x when x ≥ 0, find
i. k
ii. mean
iii. variance.
(b) Calculate mean and standard deviation of the following frequency distribution.
[8+8]
4.5 - 12.5 4
12.5 - 20.5 24
20.5 - 28.5 21
28.5 - 36.5 18
36.5 - 44.5 5
44.5 - 52.5 3
52.5 - 60.5 5
60.5 - 68.5 8
68.5 - 76.5 2

?????

2 of 2
Code No: T2121/R07 Set No. 4
II B.Tech II Semester Supplementary Examinations, December 2009
MATHEMATICS FOR AEROSPACE ENGINEERS
(Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
?????

22n−1
1. (a) Prove that Γ(2n) = √ Γ(n)Γ(n
π
+ 12 ).
R1 xm−1 +xn−1
(b) Prove that β(m, n) = (1+x)m+n
dx. [8+8]
0

2. (a) Define analyticity of a complex function at a point P and in a domain D.

Prove that the real and imaginary parts of an analytic function satisfy Cauchy
Riemann Equations.
3 3
(b) Show that the function defined by f (z) = x (1+i)−y x2 +y 2
(1−i)
at z 6= 0 and f(0) = 0
is continuous and satisfies C-R equations at the origin but f 0 (0) does not exist.
[8+8]
R 2 + cos πz 2 ) dz
3. (a) Evaluate (sin πz
(z−1)(z−2)
where C is the circle |z| = 3 using Cauchy’s integral
C
formula.
R
z=1+i
(b) Evaluate (x2 + 2xy + i(y 2 − x)) dz along y=x2 . [8+8]
z=0

R2π sin2 θ dθ
4. (a) Evaluate a+ b cos θ
using residue theorem.
0
R∞ x2 dx
(b) Evaluate (x2 +1) (x2 +4)
using residue theorem. [8+8]
−∞

5. (a) Prove that the transformation w=sinz maps the families of lines x=constant
and y=constant in to two families of confocal conics.
(b) Find the bilinear transformation which maps the points (i, -i, 1) of the z-plane
into (0,1, ∞) of the w-plane. [8+8]

6. (a) Define a tensor of first order. If aijkl .......bijkl ........are two tensors of the same
order then, prove that Cijkl .......=aijke .......+ bijkl is a tensor of same order.
(b) Show that aij Akj =∆δ ik where ∆ is a determinant of three and Aij are cofactors
of aij . [8+8]

7. (a) Define a random experiment, sample space, event and mutually exclusive
events. Give examples of each.
(b) Box A contains 5 red and 3 white marbles and box B contains 2 red and 6
white marbles.

1 of 2
Code No: T2121/R07 Set No. 4
i. If a marble is drawn from each box, what is the probability that they are
both of the same colour? [8+8]

8. (a) A Poisson distribution has a double mode at x = 2 and x = 3, find the

maximum probability and also find p(x≥2).
(b) The weekly wages of 1000 workers are normally distributed around a mean of
Rs.70 and S.D of Rs.5/- Estimate the number of workers whose weekly wages
will be
i. between Rs.70 and Rs.72
ii. between 69 and 72. [8+8]

?????

2 of 2
Code No: T2321 ^dͲϭ

II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

MASS TRANSFER AND SEPARATION

(Biotechnology)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
__________________________________________________________________________


1. a) A student attempts to measure the diffusivity of A in air by using the Stefan tube. The
boiling point of A is only several degrees higher than the experimental temperature. Do
you think that the pseudo-steady state approximation is valid in this case? Give a
qualitative explanation. (6M)
b) Calculate the rate of diffusion of hydrogen (A) through non-diffusing methane (B)
at 250C and 101 kN/m2 pressure ( DAB = 6.6×10-5m2/s ). The diffusion path is 5 mm long
and concentration of hydrogen at two ends of the path in terms of partial pressure is 12
kN/m2 and 8.4 kN/m2 respectively (10M)

2. a) Discuss the important and applications of mass transfer analogies. (8M)

b) A plate, 0.5 m square, coated with a layer of benzoic acid, is placed in a stream of
water flowing at a velocity of 0.25m/sec at a temperature of 21ºc. Calculate the average
rate of dissolution of the acid per unit area of the plate and also the mass transfer.
The following data are available: solubility of benzoic acid in water at 25ºC =3.01 kg
/m3; diffusivity of benzoic acid in water =10-9 m2 /s and velocity of water at
25ºC=8.9×10-4 kg/m.s. (8M)

3. a) The solubility of A in water is 0.5 kmol/m3 at a partial pressure of 60 mm Hg. If the

total pressure is 1.2 atm and the Henry’s law is applicable, calculate the Henry’s law
constant (6M)
b) What are parameters which will effect the equilibrium diagram (6M)
c) What is Marnogine effect? (4M)

4. Ammonia is to be removed from air-NH3 mixture containing 20% of volume ammonia in

a counter current absorber using water at 1 std atm and 200c. The absorber is to be
designed to remove 99.5% by volume of ammonia in the entering gas. Calculate the
minimum water rate and the number of theoretical plates necessary for absorption, if 1.2
time the minimum water rate us used for a gas rate of 1 kg/s. Equilibrium data:
Partial pressure of 12 18 32 50 70 166
Ammonia, mm hg
Gm.NH3/100gm water 2 3 5 7.5 10 20 (16M)

1 of 2
Code No: T2321 ^dͲϭ

5. An equimoloar mixture of A and B is to be prepared in a try tower. A top product having

95 mo1% A is acceptable. However, a very pure bottom product having not more then
0.1 mo1% A is required. The feed is liquid at its bubble point. A reflux ratio of 2.0 is
suggested. The relative volatility of A with respect to B is ĮAB=2.2. Determine the
number of ideal stages. (16M)

6. a) What are the important characteristics of a good solvent in liquid-liquid extraction?

b) What is the difference between a type I and type II ternary system? Can a system
transition from one type to the other by changing the temperature? Why? (8+8M)

7. a) Draw and explain apparent adsorption equilibrium diagram when adsorption occurs
from concentrated solution.
b) Name five of the most important commercial adsorbents? What is the distinguishing
feature of the molecular-sieve zeolites? (8+8M)

8. a) Explain the phenomena of gas separations in porous membranes. (8M)

b) Differentiate between osmosis and reverse osmosis with neat sketch. (8M)

            
            
            
            
            
            
            
            
            
            
            
            
            
      ϮŽĨϮ      
            
            
    
Code No: T2321 ^dͲϮ
II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

MASS TRANSFER AND SEPARATION

(Biotechnology)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
__________________________________________________________________________
1. a) Explain why and how molecular diffusivity in gases changes with pressure and
temperature. (6M)
0
b) Calculate the rate of diffusion of NaCl at 18 C through a stagnant film of water 1 mm
thick when the concentrations are 20% and 10% respectively on the either side of the
film.
Data: Density of 20% NaCl at 180C = 1.15×103 kg/m3
Density of 10% NaCl at 180C = 1.07×103 kg/m3
Diffusivity of NaCl in solution at 180C = 1.36×10-9 m2 /sec.
(10M)
2. a) Write short note on Convective Mass Transfer Coefficients. (6M)

b) A large volume of pure gas B at 1 atm .pressure is flowing over a surface from
which pure A is vaporizing. The liquid A completely wets the surface which is a blotting
paper. Hence the partial pressure of A at the surface is the vapor pressure of A at 298 K
which is 0.2 atm. The ky has been estimated to be 6.78×10-15 kg mol/s.m2.mol fraction.
Calculate NA ,the vaporization rate and also the value of ky and kG. (10M)

3. a) The solubility of a gaseous substance (mol. Wt. = 26) in water is given by Henry’s
law: pA = 105xA, where pA in mm Hg and xA liquid phase mole fraction. Convert the
equilibrium relation to the following forms: (i) yA= mxA if the total pressure is 10 bar; (ii)
pA =m1CA, CA in gmol/litre. Also write down the equilibrium relation using the mole ratio
unit. Assume that the solution is dilute and has a density equal to that of water (1000
kg/m3). (10M)
b) Differentiate between local overall mass transfer coefficient and overall mass transfer
coefficient (6M)
4. Carbon disulphide is to be remove from CS2-N2 mixture by absorption. It is carried out at
I std pressure and 240 and the partial pressure of CS2 in the gas entering is 50mm of Hg.
The gas is blown into the tower at a rate of 2000m3/hr and gas coming out will contain
0.5% CS2 by volume. Average mole wt of oil is 180. The oil enters the tower essentially
stripped off all CS2 and solution of oil and CS2 are ideal. The vapor pressure of CS2 at
240C is 345mm of Hg. Determine (i) The minimum L/G ratio. (ii) The number of
theoretical plates for L/G of 1.5 times the minimum. (16M)

1 of 2
 ^dͲϮ
Code No: T2321

5. A mixture of di- and tri-ethylamine’s containing 55 mole% of the former fed to a

distillation column at a rate of 40 kmol/h. The feed is at its bubble point. The column is to
operate at Atmospheric pressure and the top product should not have more than 2.5 mol%
of the less volatile. Also, not more than 2% of the dim ethylamine in the feed should be
allowed to leave at the bottom. The reflux to the column is a saturated liquid. Determine
(a) the minimum reflux ratio. (b) the number of theoretical plates if the actual reflux ratio
is 1.4 times the minimum.
X 0.020 0.039 0.052 0.065 0.090 0.140 0.215 0.430 0.601 0.782 0.853 0.932 0.985
Y 0.042 0.085 0.124 0.153 0.225 0.316 0.449 0.678 0.802 0.910 0.948 0.970 0.993 (16M)

6. a)Does a concurrent cascade have any merit for liquid-liquid extraction? If not, Why not?
Explain
b) Can a crosscurrent cascade accomplish complete extraction with an infinite number of
stages?
c) When liquid-liquid extraction is used, are other separation operation needed? Why?
(6+4+6M)
7. a)What is an adsorption isotherm? How can the heat of adsorption be determined from a
series of isotherms?
b) What is ideal fixed-bed adsorption? What assumptions are necessary for it to apply?
What is meant by breakthrough? (8+8M)
8. a) Explain briefly the classification of membrane processes and provide suitable example
for each classification. (10M)
b) Write short notes on effect of operating parameters in gas separation. ;ϲDͿ

            
            
            
            
            
            
            
            
            
            
            
            
            
            
     ϮŽĨϮ       
            
            
          
^dͲϯ
Code No: T2321

II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

MASS TRANSFER AND SEPARATION

(Biotechnology)
Time: 3 Hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
__________________________________________________________________________

1. a) How does the binary gas-phase diffusivity depend upon the total pressure and
temperature? Can you give qualitative explanations? (6M)
-4 3
b) In a laboratory is 3×10 m of toluene was accidentally spilled over and has been
quickly spread over an area of 0.85 m2. If the diffusion is tacking place through a
stagnant air of 1 mm thick, calculate the time required for the toluene to be evaporate
completely at 298 K and 1.013×105 N/m2 . For toluene, at prevailing conditions, density
= 866 kg/m3, diffusivity in air = 8.4×10-6 m2 /sec and vapor pressure = 3.99966×103
N/m2. (10M)

2. (a) Do velocity, temperature, and concentration boundary layers on a flat plate all build
up at the same rate? If not, why not? (8M)

(b) A stream of air flowing at 30 m/sec over a 2.25 m2 thin square plate of solid
naphthalene. Determine the rate of sublimation rate from the plate. The air is at 250C and
the plate at 250C. The diffusivity of naphthalene in air at 00C and 1 atm is 5.14×10-6
m2/sec. The vapor pressure of naphthalene at 250C is 25 Pa. The viscosity of air is
1.85×10-8 kg/m sec. (8M)
3. a) In a wetted-wall tower, H2S is being absorbed from air into water at 1.6 bar total
pressure and 250c. The gas-phase mass transfer coefficient is predicted to be kc=3.42
mol/(h) (m2)(ǻC,kmol/m3).. At a given point in the column , the mole fraction of H2S in
the liquid at the gas-liquid interface is 1.8*10-5 and that in the bulk gas is 0.15. The
solubility of H2S in water at the given temperature is 0.00337 mass fraction per
atmosphere pressure of the gas. Calculate the local flux. (10M)
b) Explain the concept of Overall Co-efficient (6M)

4. A coal gas is freed of its light oil content (benzene) by absorption into an a absorbent
oil. The inlet gas contains 2% benzene by volume and 95% removal is required. Inlet gas
flow rate=0.25cu.m/s; Pressure =1.07x105N/sq.m; Temperature = 260C; Oil inlet flow
rate (Ls) =1.787x10-3 k mol/s; Solute content of inlet oil=0.005 mole fraction benzene;
Average molecular weight of oil = 260. Equilibrium data Y=0.125x (mole fraction units).
Determine the number of trays required graphically. (16M)
1 of 2
 ^dͲϯ
Code No: T2321

5. A distillation column which separates pinene and limonene consists of a reboiler, 15

theoretical plates and a total condenser. The feed is at its bubble point and has 72%
pinene in it. The overhead product contains 95 mol% pinene and the bottom product has
95% limonene. Determine (a) The reflux ratio to be maintained, (b) The location of the
feed plate, (c) Number of ideal stages required for the above separation for total reflux.
Given: Į = 1.71. (16M)
6. Write about the system of three liquids –two pairs partially soluble with the help of an
equilibrium diagram. Give example. Also discuss the effect of temperature on the above
system. (16M)

7. a) Write short notes on Chemsorption (6M)

b) Define relative adsorpvity and write typical values for few systems (5M)
c) Write short notes on applications of adsorption (5M)

8. a) Write short notes on application of dialysis process for kidney failure cases. (8M)
b) What are pressure driven membrane process and explain briefly. (8M)
          
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
           
      ϮŽĨϮ     
            
        
            
^dͲϰ
Code No: T2321

II B.Tech II Semester (R07) Supply Examinations, Dec- 2009

MASS TRANSFER AND SEPARATION

(Biotechnology)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
_________________________________________________________________________
1. a) Methane diffuses at steady state through a tube containing helium. At point 1, the
partial pressure of methane is pA1 = 55 Kpa and point 2, 0.03 m apart pA2 =15 K pa
and temperature is 298 K. At this pressure and temperature, the value of diffusivity is
6.75×10-5 m2/s
i) Calculate the flux of CH4 at steady state for equimolar counter diffusion.
ii) Calculate the partial pressure at 0.02 m apart from point 1. (10M)
b) Write short notes on permeability (6M)

2 . a) Give the physical significances of the dimensionless groups in mass transfer (8M)

b) In order to measure the gas-phase mass transfer coefficient in a stirred cell at a

given stirrer speed, absorption of ammonia diluted with dry air in aqueous sulphuric
acid is carried out for a given period of time. The gas in the cell is well-stirred and the
cross-sectional area is 31.5 cm2. If the volume of acid taken is 100 ml at 1(N)
concentration and at the end of 20 minutes the liquid is found to contain 0.82 g mole
ammonia per litre, calculate the gas-phase mass transfer coefficient. (8M)

3.a ) Give the physical significances of the dimensionless groups in mass transfer (8M)

b) At certain level in the wetted wall column the ammonia concentration in gas and
liquid phases 0.6 and 0.35 by mole fractions. Equilibrium relation is y=0.58x, ky=2
and 65% controlled by gas phase resistance. Find the interfacial concentrations.(10M)

4. An acetone-air mixture containing 0.025 mole fraction acetone has to its acetone
reduced to 1% of this value by counter current absorption in a packed tower. Gas flow
rate of pure air is 1kg/m2 sec and water is1.6 kg/m2. For this system the equilibrium
diagram is given by Y=1.75X/(1-0.75X) where Y is kg moles of acetone /kg mole
of air in gas phase and X is kg moles of acetone per kg mole of water in liquid phase.
What is the tower required if height of overall transfer unit is HtoG =50 cm. (16M)

1 of 2
 ^dͲϰ
Code No: T2321

5. Distillation column is to be designed to separate A and B continuously. The feed is

35% A and 65% B at its dew point. The distillate and the residue compositions are
0.95 and 0.025 respectively.

i) Find the quantities of distillate and bottoms per hour.

ii) Find the number of equilibrium stages required in the column if the reflux ratio is
2.5.Assume the relative volatility as 2.25.

6.a) Write about the use of equilateral coordinates to describe the concentrations in ternary

systems. (8M)

b) What are the various parameters to be considered in making a choice of solvent.(8M)

7.a) In adsorption, why are adsorbents having a microporous structure desirable? (5M)
b) What is absorption hysterisis? (5M)
c) What is an adsorption isotherm? Does it have anything to do with phase
equilibrium? (6M)

8. a) How do you separate the mixture of gases using membranes? Explain its operating
principle. (8M)
b) Explain briefly dialysis process. (8M)

 

  

            
            
            
            
            
            
            
            
            
            
            
            
      ϮŽĨϮ