ADVANCED WORKSHOP ON

STEEL DESIGN Date: 14th - 15th June 2019

Venue: Victor Menezes Convention Centre, IIT Bombay, Mumbai

ORGANIZED BY

Consulting Engineers Association of India INSDAG Centre for Excellence in Steel Technology
Western Region Centre Kolkata Indian Institute of Technology, Bombay
ABOUT THE COURSE
There has been a demand for another workshop on Advanced Steel Deign
dealing with topical issues, as was done for the first two in 2012 and 2015,
both of which received very good responses.
CEAI-WRC, INSDAG and COEST at IIT Bombay have therefore, based on the
feedback, deliberated and put together a sequel to the first two.
For the benefit of those who missed the earlier two, there will be a quick recap
of some basic principles to refresh and bring everyone on par.
One of the main topics, in view of the numerous FIRE incidences that have
occurred in urban and industrial areas, would be the design of steel
structures treating fire as a design load on the structure.
The second main topic would be relating to SEISMIC forces, since analysis
and design to deal with those forces have become more intensive. Hence
those aspects along with the JOINT DESIGNS will be other thrust areas.
A third topic of great interest would be WELDING, which drew tremendous
attention last time, and is a major connection procedure.
Presentations will be made by faculty from the IIT Bombay, IIT Madras, CBRI
Roorkee, INSDAG and Consulting Organisations.
As Engineers, we need to remind ourselves that, while Engineers are the sine
qua non resources for all projects, it is also the Engineers who enable the
development and growth of the nation and are involved in innovations day in
and day out. Therefore it is necessary for the Engineers to keep abreast with
the latest developments, so that they can carry out, check and certify that the
designs and constructions have been done as per the state-of-the-art
standards and practices.

About Consulting Engineers' Association of India (CEAI)

www.ceai.org.in
Consulting Engineers Association of India (CEAI) is the apex body of consulting engineers in India.
CEAI represents the Indian Engineering Consultancy profession at the International Federation of
Consulting Engineers (FIDIC). CEAI has, behind it, around 60 years of accumulated knowledge and
experience. CEAI Membership comprises of practicing consultants, private and public sector firms
engaged in the entire range of engineering consultancy services.
CEAI looks after the interest and enhances the status of the consulting engineering profession in India
and is equally concerned with quality development, productivity enhancement and promotion of
ethical practices. CEAI has established linkages and strong bonds with its counter parts in various
countries and is a staunch advocate of global networking and co-operation.
 About Institute for Steel Development & Growth (INSDAG)
www.steel-insdag.org
Institute for Steel Development & Growth (INSDAG) is a member based non profit making organization. The Institute
primarily works towards the development of advanced design methodologies for expanding application of steel in
different segments of industry, upgrades skills and knowledge of technical personnel through training, creates
awareness amongst potential users, communicates the benefits of steel vis-à-vis other competitive materials, etc.
INSDAG has taken up the responsibility to facilitate revision of various related codes with active participation from
IIT, Chennai, SERC, ANNA University and a number of Consultants/ Fabricators/ Prime Contractors, etc.

About Centre for Excellence in Steel Technology (CoEST) at IIT Bombay

www.coest.iitb.ac.in
CoEST is a joint initiative by the Ministry of Steel, Government of India and the Indian Institute of Technology
Bombay hosted by the Metallurgical Engineering & Materials Science Department to cater to the needs of the entire
Indian Iron & Steel producers and user industries. It has partnership with JSW Steel and Tata Steel. The focus areas
being Process metallurgy, Microstructure and properties, Corrosion and protection and Steel intensive buildings.

WHO SHOULD ATTEND?

All those involved in Structural Steel Engineering Design, Fabrication & Erection:

 Engineering Consultants, Structural Steel Designers  Project Managers

 Fabricators & Erectors  Infrastructure organizations
 Engineers in Government/ Semi-Government/ Local Bodies/  Faculty of Engineering Colleges and Technical Institution
Authorities

REGISTRATION DETAILS
Course Fee per participant for 2 days, all inclusive:

Member ` 8,000 Non-Member ` 9,000 Students ` 6,000

GST will be charged extra as applicable.

 Incentive: 5% reduction in fees if there are 5 or more participants from one organization.
 Cheque/ DD should be drawn in favour of "Consulting Engineers Association of India - Western Region Centre” payable at Mumbai.
 PROGRAMME
Date: 14-15 June 2019
Venue: Victor Menezes Convention Centre, IIT Bombay

DAY 1 DAY 2
08.30 - 09.00 Registration & Light Breakfast 08.30 - 09.00 Light Breakfast

09.00 - 09.30 Inaugural Session 09.00 - 10.00 Advances in Design under Seismic
Conditions
09.30 - 10.15 Behaviour of Structures Prof. Meera Raghunandan, IIT Bombay
(under different forces)
Prof. Siddhartha Ghosh, IIT Bombay

10:15 - 11:00 Metallurgy of Steel & Carbon Footprint 10.00 - 11.00 Osdag- Connection Design Software
of Steel Structures Prof. Siddhartha Ghosh, IIT Bombay
TBA

11.00 - 11.15 Tea Break 11.00 - 11.15 Tea Break

11:15 - 12:00 Basics and Recap of Limit State Design 11.15 - 12.15 Welding Procedures
Dr. Harshavardhan Subbarao Mr. Jeffrey Nambiar
Director, Chempro Expertise Pvt. Ltd.

12.00 - 13.00 Design for Fire as a Structural Load 12.15 - 13.00 Case Study
on the Structure Mr. M M Ghosh, INSDAG
Prof. S R Satishkumar, IIT Madras

13.00 - 14.00 Lunch 13.00 - 14.00 Lunch

14.00 - 15.00 Design as per American Institute of 14.00 - 15.00 Do's & Don'ts in Steel Member
Steel Construction (AISC) and Connection Design - Learning
Mr. Charles Simoes from Mistakes
Former Associate Director, Aker Solutions Dr. S R Satishkumar, IIT Madras
15.00 - 16.00 Fire Resistant Design of Steel Structures 15.00 - 16.00 Connections for Seismic Conditions
Dr. Suvir Singh, Chief Scientist & Group Leader Dr. Ajay B Yeri
Fire Engineering Group, CBRI, Roorkee Design Excellence (India) Pvt. Ltd.

16.00 - 16.15 Tea Break 16.00 - 16.15 Tea Break

16:15 - 16:30 TBA 16.15 - 17.00 Open Discussions

16.30 - 17.30 Open Discussions 17.00 - 17.30 Filling of Feedback forms by Participants

17.30 - 17.45 Vote of Thanks

Mr. Jeffrey Nambiar
Hon. Secretary cum Treasurer, CEAI-WRC

17.45 - 18.00 Distribution of Certificates &

Closing of the Course

Ÿ
All participants are requested to attend till the end Ÿ
Certificate will be issued to those who attend the entire course.
Ÿ Participants are advised to bring their copy of IS 800:2007. The code will NOT be distributed in the programme.
 REGISTRATION FORM

ADVANCED WORKSHOP ON

STEEL DESIGN
Date: 14th - 15th June 2019 | Venue: Victor Menezes Convention Centre, IIT Bombay, Mumbai

ORGANIZED BY

Consulting Engineers Association of India INSDAG Centre for Excellence in Steel Technology
Western Region Centre Kolkata Indian Institute of Technology, Bombay

Name (in CAPS): ___________________________________________________________________ Sex: M /F ______________

Designation: ___________________________________________ Organization: ________________________________________

Contact Address: _________________________________________________________________________________________

City: _______________________________ Pin: _____________________________ Ph: _______________________________

Mob: ________________________________ Email: __________________________ Meal Preference: V/NV __________________

Details of Cheque/ Draft/ NEFT: _________________________________________ Amount: Rs: ___________________________

Date: ___________________________________________________________ Signature of the Applicant: _________________

 Course Fee per participant for 2 days, all inclusive: Member ` 8,000/-; Non-Member ` 9,000/-; Students ` 6,000/-.
GST will be charged extra as applicable.
 Incentive: 5% reduction in fees if there are 5 or more participants from one organization.
 It is a Non Residential course.  Certificate will be issued to those who attend the entire course.
 Cheque/ DD should be drawn in favour of "Consulting Engineers Association of India - Western Region Centre” payable at Mumbai.

Payment can also be made by bank transfer:

Beneficiary: Consulting Engineers Association of India - Western Region Centre payable at Mumbai
Account No.: 038602000022706 | Name of Bank: Indian Overseas Bank | Branch Code: 000386
Address of Branch: Nandjyot Industrial Estate Branch, Near MTNL, Andheri Kurla Road, Sakinaka, Mumbai - 400 072.
IFS Code: IOBA0000386 | MICR Code: 4000 20032 | GSTIN: 07AAATC5274E1ZX | PAN: AAATC5274E

Mail this form to: Contact: Mr. Jeffrey Nambiar, Hon. Secretary & Treasurer
CEAI - Western Region Centre Email: [email protected]; Mob: +919820083062
c/o Chempro Expertise Pvt. Ltd., Office Contact: Email: [email protected]
203, Trade Corner, Saki Naka, Andheri (East), Mumbai - 400072. Tel: +91 22 28596350/ 28508313