Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Part B & Part C Questions - Unit Wise

    Uploaded by

    Jairus
    This document provides a list of potential exam questions for the 2nd semester BE/BTECH course BE8254 BASIC ELECTRICAL AND INSTRUMENTATION ENGINEERING for Anna University exams in April/May 2019. It includes 58 questions across 5 units that cover topics such as three-phase circuits, transformers, DC machines, induction motors, and transducers. The questions are multiple choice, numerical problems, and short answer and may be asked on the exams either verbatim or with minor modifications. Students are advised not to copy or republish the questions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Part B & Part C Questions - Unit Wise

    Uploaded by

    Jairus
    24 views2 pages
    This document provides a list of potential exam questions for the 2nd semester BE/BTECH course BE8254 BASIC ELECTRICAL AND INSTRUMENTATION ENGINEERING for Anna University exams in April/May 2019. It includes 58 questions across 5 units that cover topics such as three-phase circuits, transformers, DC machines, induction motors, and transducers. The questions are multiple choice, numerical problems, and short answer and may be asked on the exams either verbatim or with minor modifications. Students are advised not to copy or republish the questions.

    Original Description:

    Nothinh

    Original Title

    2018 Calendar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a list of potential exam questions for the 2nd semester BE/BTECH course BE8254 BASIC ELECTRICAL AND INSTRUMENTATION ENGINEERING for Anna University exams in April/May 2019. It includes 58 questions across 5 units that cover topics such as three-phase circuits, transformers, DC machines, induction motors, and transducers. The questions are multiple choice, numerical problems, and short answer and may be asked on the exams either verbatim or with minor modifications. Students are advised not to copy or republish the questions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    Part B & Part C Questions - Unit Wise

    Uploaded by

    Jairus
    This document provides a list of potential exam questions for the 2nd semester BE/BTECH course BE8254 BASIC ELECTRICAL AND INSTRUMENTATION ENGINEERING for Anna University exams in April/May 2019. It includes 58 questions across 5 units that cover topics such as three-phase circuits, transformers, DC machines, induction motors, and transducers. The questions are multiple choice, numerical problems, and short answer and may be asked on the exams either verbatim or with minor modifications. Students are advised not to copy or republish the questions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Anna University Exams April / May 2019 – Regulation 2017

    Rejinpaul.com Unique Important Questions – 2nd Semester BE/BTECH


    BE8254 BASIC ELECTRICAL AND INSTRUMENTATION ENGINEERING
    PART B & PART C QUESTIONS – UNIT WISE
    Unit I

    om
    1. A balance three phase load consists of three coils, each of resistance 8ohm and inductive reactance
    of 10 ohm. Determine the line current and power absorbed when the coils are star connected, delta
    connected across 400V, 3 phase supply. (8 marks)
    2. An unbalanced four wire star connected load has a balanced voltage of 400V, the loads are
    Z1=(4+j8)Ω, Z2=(3+j4) and Z3=(15+j20)Ω. Calculate the (i) Line currents (ii) Currents in the neutral

    l.c
    wire and (iii) Total power. (8 marks)
    3. Obtain expression for power and power factor for three phase AC delta connected balanced load
    circuit.
    4. A delta connected balanced load is supplied from 3 phase 400V supply. The line current is 20 A, total

    u
    power taken by load is 10,000. Examine the impedance in each branch, the phase current, power
    factor and total power consumption.
    pa
    5. i) explain about the conversion of star and delta conversion and write its expressions for each
    conversion ii) What is the need for power factor improvement in electrical circuits?
    6. What is tariff? What are its objectives? Discuss in detail about different types of tariffs with its
    applications.
    jin

    7. I) Draw the single line diagram of an AC power system and also discuss in detail about Transmission
    and Distribution of electrical energy.
    8. Explain the measurement of power in 3 phase circuit using one wattmeter method.
    Unit II
    re

    1. Explain various types of three-phase transformer connections.


    2. Explain the constructional details of different types of 3-phase transformer with neat diagrams.
    3. A) Draw the phasor diagram and explain the operation of practical transformer on-load. B) Derive
    w.

    the EMF equation of a single-phase transformer with respect to its primary and secondary
    windings.
    4. A 250/500V transformer gave the following test results: S.C. Test with low voltage winding short
    circuited: 20V, 12A, 100W O.C. Test: 250V, 1A, 80W on low voltage side. Determine the circuit
    ww

    constants and draw the equivalent circuit. Also determine the efficiency when the output is 10A at
    500V and 0.8pf lagging.
    5. Draw the phasor diagram of the transformer under (i) Resistive load (ii) capacitive load (iii)
    Inductive load
    6. Drive the condition for maximum efficiency in the transformer. (8 marks)
    7. A 30KVA, 2000/200V, 1Φ, 50Hz transformer has a pry resistance of 3.5Ω & reactance 4.5Ω. The
    Secondary resistance & reactance are 0.015Ω & 0.02Ω respectively. Find equivalent resistance,
    reactance and impedance i) referred to primary ii) referred to Secondary. (8 marks)
    8. What is meant by auto transformer? Explain the principle, construction, working of an auto
    transformer. (8 marks)
    Unit III
    1. Describe with a neat diagram the principle of operation and constructional features of DC
    machines.
    2. With neat diagram explain in detail. (i) Armature Reaction (ii) Commutation in DC machines.
    3. Draw the different characteristics of DC machine and explain them in detail.
    4. Explain the construction, working principle, characteristics and applications of Universal motor with
    relevant diagrams. How can an universal motor be reversed?
    5. (i) Describe the construction and principle of operation of a DC generator with a neat diagram. (ii)
    Derive the emf equation of DC generator.
    6. Draw and explain the no-load and load characteristics of DC shunt, series and compound generators.
    7. What are the various starting method of DC motor? Explain any one method (3 point or 4 point
    starter). (8 marks)
    8. (i) With neat schematic, explain the following methods for speed control of DC shunt motor (a)
    Armature Control Method (b) Field Control Method (8 marks)

    om
    Unit IV
    1. Explain the construction and working of types of single phase induction motor. Explain why the single
    phase induction motors are not self-starting?
    2. (i) Show that the starting torque of a synchronous motor is zero. (ii) Discuss in detail the phenomenon
    of ‘hunting’ in a synchronous machine. How is it remedied?
    3. With a neat diagram describe the working principle of Brushless DC motor.

    l.c
    4. Explain in detail the starting methods of three phase induction motor with diagrams.
    5. Explain the construction and working of AC series motor and Stepper Motor with diagram.
    Unit V
    1. (i). Draw and explain the principal of Hall Effect. (ii). Derive the Hall coefficient with an application

    u
    2. Draw the block diagram of general purpose oscilloscope and explain the principle.
    3. I) List the types of capacitive transducers and illustrate with diagram. Ii) What are the factors to be
    pa
    considered while interfacing transducers to electronic control and measuring systems?
    4. (i)Illustrate the working Principle of piezoelectric transducers with neat sketch. ii) Explain the
    operation of LVDT with an application.
    5. (i)Explain working principle, construction & characteristics of thermistors and Thermocouple.
    jin

    6. Describe any 3 static & dynamic characteristics of an instrument with an example.


    re

    Questions Are Expected for University Exams This May or may Not Be Asked for Exams
    Please do not Copy (or) Republish This Questions, Students if You Find the Same Questions in Other
    Sources, Kindly report us to [email protected]
    w.
    ww

    You might also like