Scribd
Upload
66 views2 pages

Plot Continous Time Signal: Matlab Source Code

This MATLAB code defines a continuous time sinusoidal signal with an amplitude of 2, frequency of 100 Hz, and phase of pi/4 radians. It generates 201 samples over a 3 period interval and plots the signal along with labeling the axes, adding a title, and setting the grid and axis limits. The output displays the plotted continuous time sinusoidal signal.

Uploaded by

razakhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
66 views2 pages

Plot Continous Time Signal: Matlab Source Code

This MATLAB code defines a continuous time sinusoidal signal with an amplitude of 2, frequency of 100 Hz, and phase of pi/4 radians. It generates 201 samples over a 3 period interval and plots the signal along with labeling the axes, adding a title, and setting the grid and axis limits. The output displays the plotted continuous time sinusoidal signal.

Uploaded by

razakhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LAB #1

PLOT CONTINOUS TIME SIGNAL


MATLAB SOURCE CODE

amp=2;
freq=100;
phase=pi/4;
T=1/freq;
t=0:T/200:3*T;
x=amp*sin(2*pi*freq*t+phase);
plot(t,x,'linewidth',2);

xlabel('time');
ylabel('amplitude');
title('continous time signal');
grid on;
axis([0 0.03 -2.5 2.5]);
set(gca,'XTick',0:0.01:0.03,'XminorTick','on');
set(gca,'YTick',-2.5:0.25:2.5,'YminorTick','on');

MATLAB OUTPUT
continous time signal
2.5
2.25
2
1.75
1.5
1.25
1
0.75
0.5
amplitude

0.25
0
-0.25
-0.5
-0.75
-1
-1.25
-1.5
-1.75
-2
-2.25
-2.5
0 0.01 0.02 0.03
time

You might also like