2 3 2 N E T H O R S E P O W E R

J LOADER

644J
 Specifications
Engine
Manufacturer and Model. . . . . . . . . . . . . . . . . John Deere PowerTech PlusTM 6068H
Non-Road Emission Standards. . . . . . . . . . . . certified to EPA Tier 3 regulations
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Valves Per Cylinder. . . . . . . . . . . . . . . . . . . . . 4
Displacement. . . . . . . . . . . . . . . . . . . . . . . . . 414 cu. in. (6.8 L)
Net Peak Power (ISO9249). . . . . . . . . . . . . . . 232 hp (173 kW) @ 1,700 rpm
Net Peak Torque (ISO9249) . . . . . . . . . . . . . . 749 lb.-ft. (1016 Nm) @ 1,400 rpm
Net Torque Rise. . . . . . . . . . . . . . . . . . . . . . . 55%
Net Power Bulge. . . . . . . . . . . . . . . . . . . . . . . 15%
Fuel System. . . . . . . . . . . . . . . . . . . . . . . . . . high-pressure common rail
Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . full-flow spin-on filter and integral cooler
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . . . . turbocharged, charge air cooled
Air Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . dual element dry type, restriction indicator in cab monitor for service
Fan Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System. . . . . . . . . . . . . . . . . . . . . . 24 volt with 80-amp alternator
Batteries (two 12 volt) . . . . . . . . . . . . . . . . . . 1,400 CCA

Transmission
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . countershaft-type PowerShiftTM
Torque Converter. . . . . . . . . . . . . . . . . . . . . . single stage, single phase
Shift Control. . . . . . . . . . . . . . . . . . . . . . . . . . electronically modulated, adaptive, load and speed dependent
Operator Interface. . . . . . . . . . . . . . . . . . . . . . steering-column- or joystick-mounted F-N-R and gear-select lever; kick-down button on hydraulic lever
Shift Modes . . . . . . . . . . . . . . . . . . . . . . . . . . auto/manual, auto to 1st or 2nd, kick down or kick down/up, three clutch cutoff settings adjustable on switch pad
Travel Speeds* Forward Reverse
Gear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 mph (7.4 km/h) 4.9 mph (7.9 km/h)
Gear 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6 mph (12.2 km/h) 8.0 mph (12.9 km/h)
Gear 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7 mph (23.7 km/h) 15.5 mph (24.9 km/h)
Gear 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.0 mph (35.4 km/h)
*Equipped with 23.5 R 25 radial tires.

Axles/Brakes
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . heavy-duty inboard planetary
Differentials . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic locking front, conventional rear — standard; hydraulic locking front and rear — optional
Rear Axle Oscillation, Stop to Stop* . . . . . . . . 26 deg.
Brakes (conform to SAE J1473, ISO3450)
Service Brakes. . . . . . . . . . . . . . . . . . . . . hydraulically actuated, inboard, sun-shaft mounted, oil cooled, self adjusting, single disc
Parking Brake. . . . . . . . . . . . . . . . . . . . . . automatic spring applied, hydraulically released, oil cooled, multi disc
*Equipped with 23.5 R 25 radial tires.

PAGES
2–3
Tires
Choice of (with multi-piece rims) Tread Width Width Over Tires Change In Vertical Height
23.5 R 25, 1 Star L3 Radial . . . . . . . . . . . 85.4 in. (2170 mm) 113.2 in. (2875 mm) 0 in. (0 mm)
23.5 -25, 20 PR L3. . . . . . . . . . . . . . . . . . 85.4 in. (2170 mm) 113.4 in. (2880 mm) – 0.1 in. (– 2 mm)
750/65 R 25, L3-T* . . . . . . . . . . . . . . . . . 86.8 in. (2205 mm) 120.7 in. (3066 mm) – 0.3 in. (– 7 mm)
28L-26, 14 PR LS2*† . . . . . . . . . . . . . . . . 89.4 in. (2271 mm) 117.6 in. (2987 mm) + 0.4 in. (+ 11 mm)
*Requires 8-deg. rear axle stops.
†
With single-piece rims.

Refill Capacities (U.S.)

Fuel Tank (with ground-level fueling). . . . . . . 93 gal. (352 L)
Cooling System. . . . . . . . . . . . . . . . . . . . . . . . 31 qt. (29.5 L)
Engine Oil with Vertical Spin-On Filter . . . . . . 26 qt. (24.5 L)
PowerShift Transmission Fluid with
Vertical Spin-On Filter. . . . . . . . . . . . . . . . 28 qt. (26.5 L)
Differential (front and rear, each axle). . . . . . 23 qt. (22 L)
Hydraulic Reservoir and Filters. . . . . . . . . . . . 31 gal. (117.3 L)
Wet-Disc Parking Brake Oil. . . . . . . . . . . . . . . 20 oz. (0.6 L)

Hydraulic System/Steering
Pump (loader and steering). . . . . . . . . . . . . . . variable-displacement, axial-piston pump; closed-center, pressure-compensating system
Maximum Rated Flow. . . . . . . . . . . . . . . . 68 gpm (257 L/m) @ 1,000 psi (6895 kPa)
System Relief Pressure (loader and
steering). . . . . . . . . . . . . . . . . . . . . . . 3,600 psi (24 821 kPa)
Loader Controls . . . . . . . . . . . . . . . . . . . . . . . two-function valve; single- or dual-lever controls; control lever lockout feature; optional third- and fourth-function valve
with auxiliary lever
Steering (conforms to SAE J1511)
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . power, fully hydraulic
Articulation Angle. . . . . . . . . . . . . . . . . . . 80-deg. arc (40 deg. each direction)
Hydraulic Cycle Times Standard Z-Bar High-Lift Z-Bar
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 sec. 6.2 sec.
Dump. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 sec. 1.4 sec.
Lower (float down). . . . . . . . . . . . . . . . . . 3.0 sec. 3.0 sec.
Total. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6 sec. 10.6 sec.
Maximum Lift Capacity. . . . . . . . . . . . . . . . . . with 4.25-cu.-yd. (3.2 m3) bucket with bolt-on cutting edge
Lift at Ground Level . . . . . . . . . . . . . . . . . 34,166 lb. (15 497 kg)
Lift at Maximum Height . . . . . . . . . . . . . . 20,226 lb. (9174 kg)
Turning Radius (measured to centerline
of outside tire) . . . . . . . . . . . . . . . . . . . . . 18 ft. 0 in. (5486 mm)
Dimensions with Pin-On Bucket
Standard Z-Bar High-Lift Z-Bar
A Height to Top of Cab and Canopy. . . . . . . . 11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m)
B Height to Top of Exhaust . . . . . . . . . . . . . . 11 ft. 0 in. (3.35 m) 11 ft. 0 in. (3.35 m)
C Ground Clearance . . . . . . . . . . . . . . . . . . . 18.1 in. (460 mm) 18.1 in. (460 mm)
D Length from Centerline to Front Axle. . . . . 5 ft. 3 in. (1.60 m) 5 ft. 3 in. (1.60 m)
E Wheelbase. . . . . . . . . . . . . . . . . . . . . . . . . 10 ft. 6 in. (3.20 m) 10 ft. 6 in. (3.20 m)
F Dump Height. . . . . . . . . . . . . . . . . . . . . . . s (see page 5) s (see page 7)
G Height to Hinge Pin, Fully Raised. . . . . . . . 13 ft. 7 in. (41.4 m) 15 ft. 0 in. (4.57 m)
H Dump Reach . . . . . . . . . . . . . . . . . . . . . . . ss (see page 5) ss (see page 7)
I Maximum Digging Depth. . . . . . . . . . . . . . 2.7 in. (69 mm) 6.4 in. (162.6 mm)
J Overall Length. . . . . . . . . . . . . . . . . . . . . . sss (see page 5) sss (see page 7)
K Maximum Rollback at Ground Level. . . . . . 40 deg. 40 deg.

55˚ max.

45˚ Cab and Canopy

50˚ max.

H
G B A
F

D C
I E

Dimensions with Quick-Coupler and Bucket

Standard Z-Bar
A Dump Clearance . . . . . . . . . . . . . . . . . . . . s (see page 6)
B Dump Reach . . . . . . . . . . . . . . . . . . . . . . . ss (see page 6)
C Maximum Digging Depth. . . . . . . . . . . . . . 2.5 in. (64 mm)
D Height to Hinge Pin, Fully Raised. . . . . . . . 13 ft. 7 in. (4.14 m)
E Overall Length. . . . . . . . . . . . . . . . . . . . . . sss (see page 6)
F Maximum Rollback, Boom Fully Raised. . . 55 deg.
G Maximum Bucket Discharge Angle,
Fully Raised. . . . . . . . . . . . . . . . . . . . . . . . 45 deg.
H Maximum Rollback at Ground Level. . . . . . 39 deg.

45˚
G

B
D
A

C E

PAGES
4–5
Dimensions with Quick-Coupler
and Construction Fork
Standard Z-Bar
A
A Reach, Fully Raised. . . . . . . . . . . . . . . . . . 25 in. (635 mm)
B Fork Height, Fully Raised. . . . . . . . . . . . . . 12 ft. 11 in. (3.94 m)
C Maximum Reach, Fork Level . . . . . . . . . . . 5 ft. 1 in. (1.55 m)
D Fork Height, Maximum Reach . . . . . . . . . . 6 ft. 1 in. (1.85 m)
E Reach, Ground Level . . . . . . . . . . . . . . . . . 3 ft. 0 in. (0.91 m)
C
F Depth Below Ground . . . . . . . . . . . . . . . . . 2 in. (51 mm)
G Tine Length. . . . . . . . . . . . . . . . . . . . . . . . s (see page 6)
H Overall Length. . . . . . . . . . . . . . . . . . . . . . ss (see page 6)
B
E

G
F
H

Standard Z-Bar Pin-On Type Bucket Information

General Purpose General Purpose w/
Bucket Type/Size w/Bolt-On Edge Teeth and Segments
Capacity, Heaped SAE . . . . . . . . . . . . . . . 4.25 cu. yd. (3.2 m3) 4.25 cu. yd. (3.2 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . 3.7 cu. yd. (2.8 m3) 3.7 cu. yd. (2.8 m3)
Bucket Weight (with teeth and
segments) . . . . . . . . . . . . . . . . . . . . . 3,746 lb. (1699 kg) 3,840 lb. (1742 kg)
Bucket Width. . . . . . . . . . . . . . . . . . . . . . 9 ft. 6 in. (2.90 m) 9 ft. 6 in. (2.90 m)
Breakout Force, SAE J732C. . . . . . . . . . . 34,407 lb. 34,407 lb.
(15 607 kg) (15 607 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . 34,379 lb. 34,247 lb.
(15 594 kg) (15 534 kg)
Tipping Load, 40-Deg. Full Turn. . . . . . . . 30,520 lb. 30,387 lb.
(13 844 kg) (13 784 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance. . . . . . . . . . . . . . . . . . . . . . 5 ft. 6 in. (1.67 m) 5 ft. 8 in. (1.72 m)
ss Reach, 45-Deg. Dump, Full Height. . . . . . 3 ft. 6 in. (1.07 m) 3 ft. 10 in. (1.17 m)
s Dump Clearance, 45 Deg., Full Height . . . 9 ft. 8 in. (2.94 m) 9 ft. 4 in. (2.84 m)
sss Overall Length, Bucket on Ground . . . . . . 26 ft. 5 in. (8.05 m) 26 ft. 8 in. (8.13 m)
Loader Clearance Circle, Bucket In
Carry Position. . . . . . . . . . . . . . . . . . . 42 ft. 3 in. (12.88 m) 42 ft. 7 in. (12.98 m)
Operating Weight. . . . . . . . . . . . . . . . . . . 40,150 lb. 40,251 lb.
(18 214 kg) (18 258 kg)
Loader operating information is based on machine with all standard equipment; 23.5 R 25, 1 Star L3 radial tires; standard counterweight; ROPS/FOPS cab; 175-lb.
(79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.

Adjustments to Operating Weights with Standard Z-Bar Pin-On Buckets

Adjustments to operating weights and tipping loads based on standard boom and 4.25-cu.-yd. (3.3 m3) general-purpose bucket with bolt-on cutting edge
Add (+) or deduct (–) lb. (kg) as indicated Tipping Load, 40-
for loaders with Operating Weight Tipping Load, Straight Deg. Full Turn, SAE
23.5 R 25, 1 Star L3 Radial . . . . . . . . . . . 0 lb. (0 kg) 0 lb. (0 kg) 0 lb. (0 kg)
23.5-25, 20 PR L3. . . . . . . . . . . . . . . . . . – 289 lb. (– 131 kg) – 216 lb. (–98 kg) – 216 lb. (– 98 kg)
750/65 R 25, L3-T* . . . . . . . . . . . . . . . . . + 780 lb. (+ 354 kg) + 606 lb. (+ 275 kg) + 599 lb. (+ 272 kg)
28L-26, 14 PR LS2*† . . . . . . . . . . . . . . . . – 1,071 lb. (– 486 kg) – 776 lb. (– 352 kg) – 781 lb. (– 354 kg)
*Requires 8-deg. rear axle stops.
†
With single-piece rims.
Standard Z-Bar Information
with Quick-Coupler and Bucket
General Purpose General Purpose w/
Bucket Type/Size w/Bolt-On Edge Teeth and Segments
Capacity, Heaped SAE . . . . . . . . . . . . . . . 4.25 cu. yd. (3.2 m3) 4.25 cu. yd. (3.2 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . 3.8 cu. yd. (2.9 m3) 3.8 cu. yd. (2.9 m3)
Bucket Weight (with coupler). . . . . . . . . . 4,900 lb. (2223 kg) 5,025 lb. (2279 kg)
Bucket Width. . . . . . . . . . . . . . . . . . . . . . 9 ft. 6 in. (2.90 m) 9 ft. 6 in. (2.90 m)
Breakout Force, SAE J732C. . . . . . . . . . . 28,976 lb. 28,976 lb.
(13 143 kg) (13 143 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . 30,137 lb. 30,018 lb.
(13 670 kg) (13 616 kg)
Tipping Load, 40-Deg. Full Turn. . . . . . . . 26,625 lb. 26,506 lb.
(12 077 kg) (12 023 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance. . . . . . . . . . . . . . . . . . . . . . 5 ft. 3 in. (1.60 m) 5 ft. 4 in. (1.62 m)
ss Reach, 45-Deg. Dump, Full Height. . . . . . 3 ft. 8 in. (1.13 m) 4 ft. 0 in. (1.22 m)
s Dump Clearance, 45 Deg., Full Height. . . . 8 ft. 11 in. (2.71 m) 8 ft. 7 in. (2.60 m)
sss Overall Length, Bucket on Ground . . . . . . 27 ft. 1 in. (8.26 m) 27 ft. 7 in. (8.41 m)
Loader Clearance Circle, Bucket In
Carry Position. . . . . . . . . . . . . . . . . . . 42 ft. 9 in. (13.03 m) 43 ft. 0 in. (13.11 m)
Operating Weight. . . . . . . . . . . . . . . . . . . 41,310 lb. 41,435 lb.
(18 738 kg) (18 795 kg)
Loader operating information is based on machine with all standard equipment; 23.5 R 25, 1 Star L3 radial tires; standard counterweight; ROPS/FOPS cab; 175-lb.
(79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.

Standard Z-Bar Information with Quick-Coupler and Construction Fork

s Tine Length . . . . . . . . . . . . . . . . . . . . . . . . 60 in. (1.52 m) 72 in. (1.83 m)
ss Overall Length. . . . . . . . . . . . . . . . . . . . . . 28 ft. 4 in. (8.64 m) 29 ft. 4 in. (8.94 m)
Tipping Load, Straight (fork level,
load centered 24 in. [610 mm]
forward on tine). . . . . . . . . . . . . . . . . 24,276 lb. 24,098 lb.
(11 012 kg) (10 931 kg)
Tipping Load, 40-Deg. Full Turn (fork
level, load centered 24 in. [610
mm] forward on tine). . . . . . . . . . . . . 21,545 lb. (9772 kg) 21,365 lb. (9691 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . 40,161 lb. 40,212 lb.
(18 217 kg) (18 240 kg)

PAGES
6–7
High-Lift Z-Bar Pin-On
Type Bucket Information
General Purpose
Bucket Type/Size w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . 4.25 cu. yd. (3.2 m3)
Capacity, Struck SAE . . . . . . . . . . . . . . . . 3.7 cu. yd. (2.8 m3)
Bucket Weight (with bolt-on edge). . . . . . 3,721 lb. (1688 kg)
Bucket Width. . . . . . . . . . . . . . . . . . . . . . 9 ft. 6 in. (2.90 m)
Breakout Force, SAE J732C. . . . . . . . . . . 30,574 lb. (13 868 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . 27,689 lb. (12 559 kg)
Tipping Load, 40-Deg. Full Turn. . . . . . . . 24,485 lb. (11 106 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance. . . . . . . . . . . . . . . . . . . . . . 6 ft. 10 in. (2.09 m)
ss Reach, 45-Deg. Dump, Full Height. . . . . . 3 ft. 10 in. (1.18 m)
s Dump Clearance, 45 Deg., Full Height . . . 11 ft. 1 in. (3.38 m)
sss Overall Length, Bucket on Ground . . . . . . 28 ft. 0 in. (8.53 m)
Loader Clearance Circle, Bucket In
Carry Position. . . . . . . . . . . . . . . . . . . 43 ft. 8 in. (13.31 m)
Operating Weight. . . . . . . . . . . . . . . . . . . 40,620 lb. (18 425 kg)
Loader operating information is based on machine with all standard equipment; 23.5 R 25, 1 Star L3 radial tires; standard counterweight; ROPS/FOPS cab; 175-lb.
(79 kg) operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.

Bucket Selection Guide*

MATERIAL (Loose weight) lb./cu. yd. kg/m3
6.00 Caliche 2,100 1250
(4.5) Cinders 1,000 590
No Ma Clay and gravel, dry 2,400 1420
xi m
Co

rm Clay and gravel, wet 2,600 1540

ns

va al um
er

tiv Lo Lo Clay, dry 2,500 1480

e ad ad Clay, natural bed 2,800 1660
Lo
ad Clay, wet 2,800 1660
5.00 Coal, anthracite, broken 1,850 1100
(3.8) Coal, bituminous, broken 1,400 830
BUCKET SIZE cu. yd. (m3)

Earth, dry, packed 2,550 1510

Earth, loam 2,100 1250
Earth, wet, excavated 2,700 1600
Deere 4.25-cu.-yd. (3.2 m3) Granite, broken or large crushed 2,800 1660
General-Purpose Bucket Gravel, dry 2,550 1510
4.00
Gravel, dry 1/2" to 2" (13 to 50 mm) 2,850 1690
(3.0) Gravel, pit run (graveled sand) 3,250 1930
Gravel, wet 1/2" to 2" (13 to 50 mm) 3,400 2020
Gypsum, crushed 2,700 1600
Limestone, broken or crushed 2,600 1540
Magnetite, iron ore 4,700 2790
3.00 Phosphate rock 2,160 1280
(2.3) Pyrite, iron ore 4,350 2580
Sand and gravel, dry 2,900 1720
Sand and gravel, wet 3,400 2020
Sand, dry 2,400 1420
Sand, wet 3,100 1840
Sandstone, broken 2,550 1510
Shale 2,100 1250
lb./cu.yd. 1,500 2,000 2,500 3,000 3,500 Slag, broken 2,950 1750
Stone, crushed 2,700 1600
kg/m3 600 900 1200 1500 1800 2100 Topsoil 1,600 950

* This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions . Optimum bucket size is determined
after adding or subtracting all tipping load changes due to optional equipment . The “conservative load” line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces . The “maximum
load” condition on this guide is sometimes utilized when operating on firm ground and level surfaces .
 644J Loader
Key: l Standard equipment s Optional equipment *See your John Deere dealer for further information.

644J Engine 644J Hydraulic System (continued) 644J Operator’s Station (continued)
l Certified to EPA Tier 3 regulations l Reservoir sight gauge s Canopy (conforms to SAE J1040 APR88): ROPS/FOPS /
l Wet-sleeve cylinder liners l Vertical spin-on hydraulic filter Multiplane isolation mounted for noise/vibration reduc-
l Electronically controlled fuel system l Hydraulic function enable/disable switch tion / Optional canopy rear window glass, for noise
l Underhood muffler l Hydraulic diagnostic ports reduction
l Underhood, dual-element air cleaner l Adjustable wristrest l Air conditioning
l Underhood, pre-screened air intake s Ride control, automatic with monitor-adjustable speed l Seat, air-suspension, deluxe cloth covered with deep
l Fuel filter/water separator with sensor settings foam, high back, lumbar support, adjustable for weight-
l Heavy-duty steel fuel tank guard l Two-function hydraulic control valve with single-lever height, fore-aft position, backrest tilt, and armrest
l 500-hour spin-on oil filter joystick control angle with backrest extension
l Serpentine drive belt with automatic tensioner s Two-function hydraulic control valve with two-lever s Seat, air suspension, vinyl, on canopy with backrest
l Automatic derating when system temps exceeded fingertip control extension
l Starter protection circuit s Three-function hydraulic control valve with single-lever l Seat belt, 3 in. (76 mm), with retractor
l Ground-level fueling joystick control and auxiliary lever for third function l Backlit sealed switch module with function indicators
l Automatic glow plugs for cold start s Three-function hydraulic control valve with two-lever l Cup holder, personal cooler holder, and storage space
s Chrome exhaust stack fingertip control and auxiliary lever for third function l Sun screen and visor
s Centrifugal engine air pre-cleaner s Four-function hydraulic valve with dual single-lever l Tilt steering column
s Engine coolant heater, 1,000 watts, 110 volts controls l Rubber floormat
s Ground-level fast-fill fuel system (150-gpm maximum s Hydraulic conversion kits, two- to three- and three- l Textured steering wheel and spinner knob
fill rate) to four-function valves l Rearview mirrors, outside (2) and inside (1) (conform
Cooling s Hydraulic control system for quick-coupler locking pins to SAE J985)
l Heavy-duty trash-resistant high-ambient cooling package (includes all controls in cab, lines, and valves) l Handholds and steps, ergonomically located and slip
Electrical resistant (conform to SAE J185)
l Two-side access to all coolers
l Cooling system isolated from engine compartment l 24-volt electrical system Loader Linkage
l Cool-on-demand swing-out fan l Solid-state electrical power distribution system l Loader boom service locking bar (conforms to SAE J38)
l Charge air cooler (air/air – 6.5 fins per in.) l High-capacity batteries (2), 12 volt with 1,400 CCA, l Z-bar loader linkage
l Transmission oil cooler (oil/air – 6.5 fins per in.) 200-min. rated reserve s High-lift Z-bar loader linkage
l Hydraulic oil cooler (oil/air – 6.5 fins per in.) l Master electrical disconnect switch Buckets and Attachments
l Engine radiator (8 fins per in.) l Alternator, high capacity, 80 amps s Full line of Deere pin-on buckets with selection of
l Integral engine oil cooler l Battery terminal safety covers bolt-on cutting edges and teeth-segmented bolt-on
l Fan guard l Lights (conform to SAE 99): Halogen driving with cutting edges*
s Axle coolers (6.5 fins per in.) guards / LED turn signals and flashers / LED stop Tires
s Automatic reversing fan and taillights
l 23.5 R 25, 1 Star L3 Radial
Powertrain l Work lights, halogen (6): cab front (4) and cab rear (2)
l Horn, with push button in center of steering wheel
s 23.5-25, 20 PR L3
l ZF torque-converter PowerShift transmission – 4F/3R s 750/65 R 25 L3-T*
l Electronically controlled, fully automatic shift modulation (conforms to SAE J994, J1446)
l Reverse warning alarm (conforms to SAE J994, J1446)
s 28L-26, 14 PR LS-2 (single-piece rims)
l Steering-column-mounted shift lever with gearshift, l Multi-piece rims
F-N-R, and lock l Computerized multifunction monitor
l Audible and visual warnings: Amber caution / Red
s Heavy-duty rims
l Auto/manual shift modes s Less wheels and tires
l Quick-shift button in loader control lever with two stop / Analog gauges: Engine coolant temperature,
transmission oil temperature, fuel level, hydraulic oil
s 8-deg. rear axle stops for extra-large tires, 13-deg.
selectable modes oscillation for standard
l Transmission clutch disconnect with three selectable temperature, engine oil pressure / Digital instruments:
Engine rpm, odometer, transmission gear/direction Other
settings
indicator, speedometer, hourmeter / Operator warning l Sound-suppression package (Level 1)
l Gear lockout on transmission s Sound-suppression package (Level 2)
l Clutch calibration engageable from cab monitor lights: Check engine, engine oil pressure, engine air
filter, battery voltage, fuel filter, transmission filter, l Fenders, front
l Vertical spin-on transmission filter s Fenders, full-coverage front, with mud flaps
l Transmission filler tube with integral sight gauge brake pressure, hydraulic oil filter, fasten seat belt,
transmission fault, hydraulic oil temperature, engine s Fenders, full-coverage front and rear, with mud flaps
l Transmission diagnostic ports l Articulation locking bar (conforms to SAE J276)
l Heavy-duty inboard planetary final drives coolant temperature, transmission oil temperature,
secondary steering l Front and rear tie-downs
l Inboard, hydraulically actuated, oil-cooled, self-adjusting l Vandal protection, includes lockable engine enclosures,
single-disc brakes l Indicator lights: Park brake / Ride control / LED turn
signals and warning flashers / Coupler pin disconnect / right counterweight storage, battery cover, and radia-
l Spring-applied, hydraulically released, sealed wet- tor/fuel/hydraulic and transmission caps
disc park brake Engine preheater / Secondary steering / Work lights
l Built-in diagnostics: Fault-code retrieval l Full counterweight with integral hitch and locking pin
l Axle and park brake oil breather extensions l Fluid-sampling ports (engine, transmission, hydraulic,
l Front axle with hydraulic locking differential l Cab wired for rotating beacon
s Front and rear axles with hydraulic locking differentials l 24- to 12-volt converter, 10 amp with two receptacles axle oils, and engine coolant)
s AM/FM/WB stereo radio with clock l Environmental drain valves with hose (engine, trans-
s Wheel spin-control system mission, hydraulic oils, and engine coolant)
s AM/FM/WB stereo radio with CD
Hydraulic System s Electrical corrosion package s Transmission side frame guards
l Pressure-compensating, load-sensing hydraulic Operator’s Station s Auxiliary bottom guards
system s Lift eyes
l In-cab adjustable automatic boom height kickout l Cab (conforms to SAE J1040 APR88): ROPS/FOPS /
Heater/defroster / Multiplane isolation mounted for
s Fire extinguisher
control s License plate bracket
l In-cab adjustable automatic boom return-to-carry noise/vibration reduction / Front and rear windshield
washers and intermittent wipers / Tinted safety glass
s Secondary steering
control s JDLinkTM

Net engine power is with standard equipment including air Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE
cleaner, exhaust system, alternator, and cooling fan at test con- standards. Except where otherwise noted, these specifications are based on a unit with all standard equipment, 23.5 R 25 radial
ditions per ISO9249. No derating is required up to 10,000-ft. tires, standard counterweight, ROPS/FOPS cab, full fuel tank, and 175-lb. (79 kg) operator.
(3050 m) altitude.

DKA644J Litho in U.S.A. (07-07)