Scribd
Upload
260 views2 pages

Torque Calculation

torque

Uploaded by

Julio C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
260 views2 pages

Torque Calculation

torque

Uploaded by

Julio C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
heets, lve Di Torque Calculation of Butterfly Valve 1. Dynamic Torque (Td ) 1.3m This torque is generated when the valve has different pressure ( AP ) between former and later of valve during the fluid which has dynamic velocity is flowing . And this is not occurred when open or close of valve is completely , when an angle ‘of 45 degrees is opened it is max. . And that time this torque effect to closing direction . This is calculated by following formula . gy x yx V2 Loss Coefficient ev 43.4 axg 2 1000 ( kof / m2 = 19928.5714 (kof /m2 WV 3 (m/s lo 9.8 (m/s) Td = Ctx Dd3 x AP Dynamic factor ct: _0.01 = 569.1799 (kof . m ) [Diameter Dd 1.3(m) 2. Bearing Friction Torque ( Tb ) This torque is generated by friction between stem of valve and bearing This is calculated by following formula (1) When vaive is opened Ten aE ue 9 Ane eee Valve Diameter [Od :1.3(m) 4 Difference Pre ‘Pc: 130000 = 2415.7277 (kgf .m) (Closing ) (kot / m2) (2) When valve is opened an angle of 30 deg. [Difference Pre. APo: 1928.57 Taw: Eso aps ee (Opening ) (gt m2) 4 2 Stem diameter ld :0,14(m) = 370.3231 (kgf .m) 3. Seating Torque ( Ts ) Bearing friction factor yb 0.2 When the valve is opened or closed , this is generated due to friction between soft and metals This is calculated by following formula Ts= PsxmxDd xbx Pt x0, = 662.5996 (kof .m) 4. Hydrostatic Torque ( Th ) This is generated when butterfly valve is setted up with horizontal . This is same as water head This is calculated by following formula . Th= yxkx |Weight per unit volum: [valve diameter lod 1000 { kat / m3 1 mx 0d4 64 = 140.1985 ( kgf . m ) Th= yx 5. Total Torque ( Tt) The total torque of valve according to open or close of valve is different . So , we should select the max. value among two results calculated by following two formula (7) When opening , it is added up with two torques , seating and bearing friction torque . namely , when valve is completely closed : Tic = Toc +Ts = Th = 3218.5257 (kgf.m ) (2) When the valve is opened some angle , this is calculated by adding up of two torques , dynamic and bearing friction torque ~ An angle of 30 Degrees Ttc = Td + Tbo 939.5030 ( kof .m) Accordingly the highest value is No. (1) = 3218.5 (kgf.m)

You might also like