Wallighter 250 Cutoff Luminaire: Applications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

WALLIGHTER 250 CUTOFF LUMINAIRE

APPLICATIONS
WALLIGHTER 250 CUTOFF AREA LIGHTING

• Building perimeters, entrances, walkways and residential yards


• Loading docks and many other wall mounted area lighting applications

SPECIFICATION FEATURES
• / 1598 Listed • Thru-feed conduit entrance on side with built-in
Suitable For Wet Locations conduit clamps
• Three-piece die-cast aluminum housing • Front access to ballast components when
protected inside and out with dark bronze installed
electrocoat finish • Mogul (E39 standard) or medium base (E26
• Enclosed, gasketed, with anodized aluminum standard) sockets
reflector and tempered glass bottom closure
• Standard and tamper resistant hardware
included

ORDERING NUMBER LOGIC


W2MC 25 S 0 A 1 G MGL DB Q
PRODUCT WATTAGE LIGHT VOLTAGE BALLAST PE LENS TYPE LAMP BASE COLOR OPTIONS
IDENT SOURCE TYPE FUNCTION
XXXX XX X X X X X XXX XX XXX
W25C = See Ballast and See Ballast See Ballast See Ballast and 1 = None G = Glass For IES Optical DB= Dark B = Time Delay
Wallighter 250 Photometric and and Photometric 3 = Internal PE Configuration See Bronze Automatically
(250 watt max.) Selection Table Photometric Photometric Selection Table Control Ballast and Photometric Switched
luminaire with Selection Table Selection Table Selection Table Quartz
cutoff optics 05 = 50 A = Autoreg For PE Kit, see F = Fusing (Not
07 = 70 S = HPS 60Hz Accessories MGL = available with
10 = 100 M = MH or 0 = 120/208/ G = Mag-Reg Mogul base E39 multivolt)
15 = 150 (55V) Merc 240/277 with (Standard without lamp) Q = Non-Time Delay
17 = 175 (with Multivolt Grounded Automatically
20 = 200 175W 1 = 120 Socket Shell MED = Switched
25 = 250 only) 2 = 208 Medium base E26 Quartz
77 = 70/75 3 = 240 H = HPF Reactor (Standard with lamp)
4 = 277 or Lag
5 = 480
D = 347 K = Hot Restart
F = 20X347
M = Mag-Reg

N = NPF Reactor
or Lag

P = CWI with
Grounded
Socket Shell

A-64/2003
GE Lighting Systems, Inc.
www.gelightingsystems.com
WALLIGHTER 250 CUTOFF LUMINAIRE

WALLIGHTER 250 CUTOFF AREA LIGHTING


FIXTURE DIMENSIONS

DATA
Approximate Net Weight 15-30 lbs 8-14 kgs
Suggested Mounting Height 8-20 ft 2-6 M

BALLAST AND PHOTOMETRIC SELECTION TABLE


All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
Light 60Hz IES Distribution Photometric Curve
Wattage Source Multivolt 120 208 240 277 480 347, 120X347 Type Number 35-17----
MOGUL BASE LAMP (NOT INCLUDED)
50 HPS H H, K, N H H H H H SC3 8825
70, 100, 150(55V) HPS H G, H, K, M G, H, M G, H, M G, H, M G, H, M G**, M SC3 8825
200* HPS A A A A A C/F A SC3 8830
250* HPS A A A A A A A SC3 8830
175 MH A A A A A A A SC3 8828
250* MH A A, P A, P A, P A, P A, P A, P SC3 8831
MEDIUM BASE LAMP (INCLUDED)
50, 70, 100, 150(55V) HPS N N N/A N/A N/A N/A N/A SC3 8833
70, 100 MH H N/A N/A N/A N/A N/A N/A SC3 8835
175 MH A N/A N/A N/A N/A N/A N/A SC3 8837
NOTE: *Horizontal lamp operation C/F = Contact Factory N/A = Not Available **347 Volt Only

REFERENCES
See Page A-79 for start of Accessories.
See Page A-83 for Explanation of Options and Other Terms Used.

GE Lighting Systems, Inc. 2003/A-65


www.gelightingsystems.com

You might also like