Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Web Design For Shear and Transverse Bending Segment R2: Check If Shear Predominates

    Uploaded by

    Sharyn Polley
    This document summarizes the design of web reinforcement for a box girder segment to resist shear and transverse bending forces. Input parameters such as shear force, bending moment, material strengths, and girder geometry are provided. Calculations are shown to check if shear or bending governs the design. The required web width and stirrup reinforcement area are calculated. It is determined that transverse bending does not control the design.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Web Design For Shear and Transverse Bending Segment R2: Check If Shear Predominates

    Uploaded by

    Sharyn Polley
    49 views2 pages
    This document summarizes the design of web reinforcement for a box girder segment to resist shear and transverse bending forces. Input parameters such as shear force, bending moment, material strengths, and girder geometry are provided. Calculations are shown to check if shear or bending governs the design. The required web width and stirrup reinforcement area are calculated. It is determined that transverse bending does not control the design.

    Original Description:

    a spreadsheet for shear

    Original Title

    Copy of Web Shear and Bending_R2

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of web reinforcement for a box girder segment to resist shear and transverse bending forces. Input parameters such as shear force, bending moment, material strengths, and girder geometry are provided. Calculations are shown to check if shear or bending governs the design. The required web width and stirrup reinforcement area are calculated. It is determined that transverse bending does not control the design.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    49 views2 pages

    Web Design For Shear and Transverse Bending Segment R2: Check If Shear Predominates

    Uploaded by

    Sharyn Polley
    This document summarizes the design of web reinforcement for a box girder segment to resist shear and transverse bending forces. Input parameters such as shear force, bending moment, material strengths, and girder geometry are provided. Calculations are shown to check if shear or bending governs the design. The required web width and stirrup reinforcement area are calculated. It is determined that transverse bending does not control the design.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    05/21/2019 04:32:10

    Web Design for Shear and Transverse Bending Segment R2


    Designer: JAJD
    Inputs
    V* 3816 kN
    Mtrans 52.7 kNm
    web width (bw) bw 221 mm
    d=z = depth of box girder z= 2378 mm
    fc 41 MPa
    ao = angle of struts 45 deg 0.785 rad
    b= inclination of ties 89 deg 1.553 rad
    min fcred = fc(1-.33ao/45)sinb or
    0.6fc fcred = 24.6 MPa
    phi 0.75

    bwreq 171 mm =V/f/(fcred x z(cosa+cotb)sina))


    check if shear stress ok OK

    Check if Shear predominates

    cover 32 mm
    stirrup diameter 12 mm
    Distance between stirups bo = 145 mm

    Bl = 649.4 kN
    Br = 955.4 kN

    1 file:///conversion/tmp/scratch/421594723.xls
    05/21/2019 04:32:11

    Check if Transverse Bending Predominates

    -335544

    Br 866 kN/m
    b1 -21.19 mm
    Vr/(zcota) 1605 kN/m
    Fcu = 0.85f'cxb1 -739 kN/m

    Check forces = 0 Vr/(zcota) + Fcu - Br = 0


    0 kN/m
    check moment =0 0.0
    use control +m for macro

    Transverse bending does not govern

    Stirrup Requirement on Tension side/stirrup


    Br 955.4 kN
    stirrup spacing s = 125 mm
    stirrup yield fsy 230 MPa
    Asr = s.Br/fsy 519.21 mm2

    2 file:///conversion/tmp/scratch/421594723.xls

    You might also like