Scribd
Upload
97 views25 pages

L 2 M E 210e9 V 0.3 Den 7860 Force : Procedures Solve Case by Ansys

1. A finite element analysis was conducted in ANSYS to analyze the deflection of a beam with given dimensions, material properties, and an applied force. 2. The beam model was discretized using 20-node solid elements and meshed with a global element size of 0.2. 3. Boundary conditions including a fixed support and concentrated force were applied to analyze the beam deflection under the given loading. 4. Post-processing was conducted to obtain the deflection, stress, and displacement results. The maximum deflection of the beam under the applied load was 0.0531 m.

Uploaded by

Maher Kattan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views25 pages

L 2 M E 210e9 V 0.3 Den 7860 Force : Procedures Solve Case by Ansys

1. A finite element analysis was conducted in ANSYS to analyze the deflection of a beam with given dimensions, material properties, and an applied force. 2. The beam model was discretized using 20-node solid elements and meshed with a global element size of 0.2. 3. Boundary conditions including a fixed support and concentrated force were applied to analyze the beam deflection under the given loading. 4. Post-processing was conducted to obtain the deflection, stress, and displacement results. The maximum deflection of the beam under the applied load was 0.0531 m.

Uploaded by

Maher Kattan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

L=2m

E = 210e9
V =0.3
Den = 7860
Force = 100 KN
** All dimension in m

Procedures solve case by Ansys :

1- Start Ansys program.

2- from Ansys main menu click on Preferences


3-select structural from menu appears >>> then ok

4-from main menu select Preprocessor >> Element Type >> Add/Edit/Delete
5- click on Add

6- select solid >>> 20node 186 >> OK

*** 20Node 186 is 3D Operation


7- To define the material beam properties select Material Props from main menu >>
Material Model

8 – from menu appears select Structural >> Linear >> Elastic >> click on Isotropic
9- on menu appeared put Modulus of Elasticity value in EX box like 210 Gpa (210e9)
at this case >> then put Poason's Ratio in PRXY box like 0.3 >> ok

10- From Material menu select Density >> then type density Material like 7860
>>OK >> close menu
11- To create a general model of beam >> select Modelling from main menu >>
create >> Keypoints >> In Active CS >>

1- Keypoint number 1 >> 0 , 0 , 0 >> Apply


2- 2 >> 1.85, 0, 0
3- 3 >> 1.85, -0.12, 0
4- 4 >> 2, -0.12,0
5- 5 >> 2, 0.15, 0
6- 6 >> 0, 0.15, 0

>> OK
12- Create >> Areas >> Arbitrary>> Through KPs >> Select the KPs from 1 to 6
,respectively >>OK
**be sure to select the KPs from 1 t0 6 respectively
13-To create the Circle >> select Modelling from main menu >> create >> Areas >>
Circle >> Solid Circle
WP X = 1.9
WP Y = 0.05
Radius = 0.03
>> OK

14- Now, create >> Areas >> Rectangle>> By 2 Corners


WP X = 0.3 WP Y = 0.1
Width = 0.1 Height = 0.05
>> OK
The final model of beam

15- to subtract the circle and rectangle,


Modeling >>Operate>>Booleans>>Subtract>>Areas
Click on beam and select all shapes to be pink , be sure all beam conversion to pink
>> OK

16-Then Select the Rectangle and Circle >> OK


The beam became as
17- Modeling>> Operate>> Extrude>>Areas >> Along Normal

Select the beam >> OK

18- put the thickness of beam in ( length of extrusion ) = -0.1 >>OK


**Ansys applying the extrusion on Z axis
19- Modeling>> Create >> Keypoints>>Hard PT on areas>> Hard Pt by coordinates
>> Select the face as illustrate bellow >> OK
20 – (1.8 , 0.15, - 0.05) , created this PT to put the force on it.
** be carfule create all Hard PT before mishing

21- Meshing >> Size Cntrls>> Manual size>> Global>> Size >> 0.2>> OK
22- Meshing >> Volumes >> Free >> Click on beam >> OK
23- Solution>> Define loads >> Apply >> Structural >>Displacement >> On Areas
>> select area >> OK

ALL DOF >> OK


24- Solution>> Define loads >> Apply >> Structural >> Force>>On
Keypoints>>select the Hard PT >> OK

>> OK
25 – To solve the case >> select Solve from solution menu >> Current LS

26– click OK
27 - When you press OK button , "Solution is done" appears, if it does not appear,
then you have error in your programming case >>> click close

28- Now you can see Deformation on beam , from main menu select General Postproc
>> Plot Result >> click on DEF+undef edge >> OK
Then appears the deformed on beam , the max deflection indicates by a red arrow

29- To show Finite Element solution >> from main menu select General Postproc >>
then select List Result >> select Nodal Solution >> from menu appease click on
Nodal Solution >> DOF Solution >> click on Y-Components of displacement >> OK
After Click OK appears solution list as shown , the red arrow indicates to Max Value

30- To show Deflection concentration Tool bar >> click on plot >> Result >>Contour
plot >> Nodal solution
31-From list menu pop up click on Nodal Solution >>DOF Solution >> Y-
components of displacement >> OK

the deflection concentration appears se figure


32- to show Stress repeat steps to reach Nodal Solution list then >> Nodal Solution
>> Stress >> X-components of stress >> OK

The stress concentration appears


When select the nodes in the first line of the model as figure:
NODE FEM Y FEM (mm) NODE Y (mm) X (m)
NO.
1 0 0 0 0
3 -1.34E-04 1 -4.71E-05 0.058882
4 -4.97E-04 2 -1.34E-04 0.116
5 -1.11E-03 3 -2.95E-04 0.174
6 -2.18E-03 4 -4.97E-04 0.232
7 -3.87E-03 5 -1.10E-03 0.29
8 -5.84E-03 6 -1.11E-03 0.348
9 -7.97E-03 7 -1.12E-03 0.406
10 -1.03E-02 8 -2.18E-03 0.464
11 -1.27E-02 9 -3.87E-03 0.522
12 -1.53E-02 10 -5.84E-03 0.58
13 -1.80E-02 11 -7.97E-03 0.638
14 -2.09E-02 12 -1.03E-02 0.696
15 -2.38E-02 13 -1.27E-02 0.754
16 -2.68E-02 14 -1.53E-02 0.812
17 -2.99E-02 15 -1.66E-02 0.87
18 -3.31E-02 16 -1.78E-02 0.928
19 -3.63E-02 17 -1.80E-02 0.986
20 -3.95E-02 18 -1.93E-02 1.044
21 -4.28E-02 19 -2.09E-02 1.102
22 -4.60E-02 20 -2.38E-02 1.16
24 -5.13E-02 21 -2.68E-02 1.218
25 -4.87E-02 22 -2.99E-02 1.276
175 -1.10E-03 23 -3.31E-02 1.334
191 -4.28E-02 24 -3.63E-02 1.392
270 -2.95E-04 25 -3.95E-02 1.45
271 -4.71E-05 26 -4.11E-02 1.508
274 -4.11E-02 27 -4.28E-02 1.566
275 -4.44E-02 28 -4.28E-02 1.624
280 -1.12E-03 29 -4.28E-02 1.682
295 -4.28E-02 30 -4.44E-02 1.74
304 -4.73E-02 31 -4.60E-02 1.798
305 -5.00E-02 32 -4.73E-02 1.856
358 -1.78E-02 33 -4.87E-02 1.914
420 -1.93E-02 34 -5.00E-02 1.972
422 -1.66E-02 35 -5.13E-02 2.0

Max Deflection = 0.0531 m


Y-X

0
0 0.5 1 1.5 2 2.5

-0.01

-0.02

-0.03 Y-X

-0.04

-0.05

-0.06

You might also like