Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Gerard Corona Shake

    Uploaded by

    Сузана Вујовић Марковић
    The document provides specifications for the Corona shake roof panel. It is 1330mm in overall length and 420mm in overall width. It has a 0.464m2 roof cover area and weighs 3.13kg per panel. The panel is made from 0.39mm thick aluminium-zinc alloy coated steel with a 150g/m2 coating for corrosion resistance. It has a textured surface of natural rock granules for UV resistance and appearance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gerard Corona Shake

    Uploaded by

    Сузана Вујовић Марковић
    65 views1 page
    The document provides specifications for the Corona shake roof panel. It is 1330mm in overall length and 420mm in overall width. It has a 0.464m2 roof cover area and weighs 3.13kg per panel. The panel is made from 0.39mm thick aluminium-zinc alloy coated steel with a 150g/m2 coating for corrosion resistance. It has a textured surface of natural rock granules for UV resistance and appearance.

    Original Description:

    Krovni pokrivač

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for the Corona shake roof panel. It is 1330mm in overall length and 420mm in overall width. It has a 0.464m2 roof cover area and weighs 3.13kg per panel. The panel is made from 0.39mm thick aluminium-zinc alloy coated steel with a 150g/m2 coating for corrosion resistance. It has a textured surface of natural rock granules for UV resistance and appearance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views1 page

    Gerard Corona Shake

    Uploaded by

    Сузана Вујовић Марковић
    The document provides specifications for the Corona shake roof panel. It is 1330mm in overall length and 420mm in overall width. It has a 0.464m2 roof cover area and weighs 3.13kg per panel. The panel is made from 0.39mm thick aluminium-zinc alloy coated steel with a 150g/m2 coating for corrosion resistance. It has a textured surface of natural rock granules for UV resistance and appearance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    CORONA SHAKE SPECIFICATION

    TECHNICAL DATA Overall Length 1330 mm


    Length of Cover 1250 mm
    Overall Width 420 mm
    1330 mm Width of Cover 371 mm
    Up stand 26 mm

    371
    Down turn 24 mm
    mm

    mm
    Roof Cover 0.464 m²
    420

    Tiles per m² 2.16


    Weight/panel 3.13 kg
    Weight/area 6.76 kg/m²
    Batten space 371 mm

    MATERIAL STRUCTURE COATING SPECIFICATION


    Overglaze: Clear 100% acrylic resin coating for granule binding
    and a semi-gloss finish. It helps enhance the appearance as
    well as increase the resistance to physical damage.

    Ove Stone Chip: Carefully selected granules provide excellent


    rgl
    a ze surface coverage and attractive natural lasting colours.
    Sto
    ne
    Ch
    ip Basecoat: A tough opaque coating based on acrylic resin. It
    Tra
    Ba
    sec bonds the stone chips and protects the underlying layer from
    ns oat
    par
    ent
    water and UV radiation. It has good UV resistance and retains
    Ac
    ry lic
    its flexibility although it does become harder after the first few
    Alu Co
    m iniu atin weeks.
    m- g
    zin
    Ste
    c Transparent coatings: Both sides of the aluminium-zinc alloy
    el
    Alu coated steel are coated with a transparent layer that provides
    min
    Tra
    nsp ium protection and a uniform substrate for further coatings. This
    are -zin
    nt A c transparent coating allows identification of the aluminium-zinc
    cry
    lic
    Co
    substrate to be made by distributors and customers.
    atin
    g

    STEEL SPECIFICATION STANDARD COLOURS


    The Gerard Corona shake is made of aluminium-zinc alloy
    coated steel. The grade of steel used is designed to allow
    forming without cracking or significant elastic recovery and at
    the same time to be rigid enough to tolerate reasonable loads TUSCANY ROSSO SPANISH RED CEDAR CHESTNUT PEPPER
    without excessive deformation.
    Base Steel Thickness 0.39 mm
    Steel Grade G300
    S280GD ASHWOOD CHARCOAL DEEP BLACK SAPPHIRE FOREST SAGE
    GREEN
    Aluminium-Zinc Coating Mass 150 g/m²
    Aluminium-Zinc Coating Grade AZ150
    Total substrate thickness 0.43 mm
    SHERWOOD BARK OLD GALAXY

    TEXTURED SURFACE MANUFACTURING CERTIFICATES


    Standard natural rock granules from New Zealand are applied
    to provide an attractive textured finish which at the same time
    enhance resistance to UV radiation. If colours other than the
    limited range of natural colours are required, the same durable
    natural rock granules are ceramic coated with lightfast heat
    resistant pigments.

    You might also like