--------------------------------------------------

ABOUT CELLS
--------------------------------------------------

# Block & Unblock TRU

RLSLE:CELL=XXXX; (Disable Alarm)
RXBLI:MO=RXOTRX-1-0,SUBORD,NOPR10:NT; (Block TRU)
RXBLE:MO=RXOTS-27-5-0&&-7&RXOTS-27-6-0&&-7;
RLSLI:CELL=XXXX; (Enable Alarm)

alogfind -e 20141110 -g 20141112 -t alp -s MC2415071_CITR

alogfind -e 20140218 -g 20140221 -t alp -s 0384L1_MEKARSEP
alogfind -e 20140209 -g 20140213 -t alp -s 3227L2_LAPANGA3

rlstc:cell=SM18367,state=halted;

rxcdp:mo=rxotg-163;

rxbli:mo=rxotg-85,force,subord;
rxese:mo=rxotg-85,subord;
rxesi:mo=rxotg-85,subord;
rxble:mo=rxotg-85,subord;

rlstc:cell=SM18367,state=active;

rxbli:mo=rxotx-75-7,force;
rxese:mo=rxotx-75-7;
rxesi:mo=rxotx-75-7;
rxble:mo=rxotx-75-7;

rxbli:mo=rxotx-147-7,force;
rxese:mo=rxotx-147-7;
rxesi:mo=rxotx-147-7;
rxble:mo=rxotx-147-7;

# c7spp:sp=all;
(Ngecek BSC tsb masuk MSC mana)

###################################################
# RLDEP:CELL=LP2003A;
MAU LIAT CGI DAN CI, LAC
##################################################

####################################################
Mo liat RXD (Dibikin AB , A, B??.....kalau bukan AB...balikin ke AB)
Kalo A atau B Aja bikin RX Divnya hilang....

Merubahnya:
RXBLI:
RXMOC:MO=RXORX-31-0&&-11;
RXBLE:
######################################################

# :MO=RXOTG-xx; << MO LIAT SERIAL NUMBER

# RXMFP:mo=rxotrx-87-0; << MO LIAT SERIAL NUMBER

################################################
# rxmsp:mo=rxotg-34,subord;
mo liat trx nya aktif atau tidak,(oper or nooper)
################################################

# Configuration Data
RXCDP:MO=RXOTG-52&-53; (To Check TG and cell status)
Error Log
RXELP:MO=RXOTG-64; (To check error log)

# MAU CARI tg bERAPA??.

RXTCP:MOTY=RXOTG,CELL=LH3106A;

# RXMOP:MO=RXOTG-165; LIAT BSSWANTED DAN Jenis Frek BB ato SY

# RXMOP:MO=RXOTRX-109-0&&-11;>>>>MAU CARI CELL DI TRU BRAPE

# To check device data

RXMDP:MOTY=RXOTRX;
RXMDP:MO=RXOTRX-87-9;

# To check alarm type in specified RXOTG

RXMFP:MO=RXOTG-50&-51,FAULTY,SUBORD;

# To check status of device - TG, TRX etc - OPER or not

RXMSP:MOTY=RXOTRX;
RXMSP:MO=RXOTRX-53-0&&-11;
RXMSP:MO=RXOTG-52;

# shows all the TG in a BSC,

# all the cell associated with each TG and the CHGR of the cells within the TG
RXTCP:MOTY=RXOTG;

# To check cell resources - no of BCCH, , TCH

RLCRP:CELL=JP01882;

# Cell Description Data

RLDEP:CELL=JP01821;

# Cell Configuration Freq Data (No.SDCCH, TN etc)

RLCFP:CELL=JP01732&JP01733;

# Cell Freq Hopping Data (HSN, MAIO)

RLCHP:CELL=BE5912A;
RLCHc:CELL=BE5912A, hop=.....;

# Cell Locating Hierarchical Data (Layerthr, Layerhys, Psstemp etc)

RLLHP:CELL=JU01613;

# Dynamic MS Pow Contr (SSLENUL, QDESUL etc)

RLPCP:CELL=JU01613;

# Dynamic BTS Pow Contr (BSPWRMIN etc)

RLBCP:CELL=JU01613;
 `
# Locating Intracell HO (MAXIHO, TMAXIHO etc)
RLIHP:CELL=JU01613;

# Cell Meas Freq (Active and Idle)

RLMFP:CELL=JU01613;

# Cell Locating Data (BSPWR, BSRXSUFF, AW etc)

RLLOP:CELL=JU01613
#Locating Urgency Data (QLIMUL, QLIMDL, TALIM etc)
RLLUP:CELL=JU01613;

# Locating Penalty Data (PTIMHF, PTIMBQ etc)

RLLPP:CELL=JU01613;

# Locating Filter Data (SSEVALSI, SSLENSI etc)

RLLFP:CELL=JU01613;
C
# Locating Disconnect Data (MAXTA etc)
RLLDP:CELL=JU01613;

# System Information BCCH data (CRO, TO, PT etc)

RLSBP:CELL=JU01613;

# System Information BCCH & SACCH data (CRH. ACCMIN etc)

RLSSP:CELL=JU01613;

#BSPWR = Power BTS on BCCH Freq

rlloc:cell=PS5976A,bspwr=53;
rlloc:cell=PS5976b,bspwr=53;
rlloc:cell=PS5976c,bspwr=53;
rllop:cell=PS5976A;
rllop:cell=PS5976b;
rllop:cell=PS5976c;

########################################
MAU LIAT CELL DALAM SUATU BSC.
# RLLAP:LAI=ALL;
########################################

NEIGHBOUR

# Cell Neighbour Relation

RLNRP:CELL=SD3355C,CELLR=ALL;

RLNRE:CELL=LIN1,CELLR=LIN10;
The command will delete the existing neighbour relationship between cell LIN1 and
cell LIN10

RLNRI:CELL=LIN1,CELLR=LIN10,SINGLE;
This command assigns the following neighbouring data to cell LIN1:

catatan:
for
EXTERNAL:
RL
# Idle Channel Measurement Data
RLIMP:CELL=JU01613;

# Cell Load Sharing Data

RLLCP:CELL=JU01613;

# Dynamic HR Allocation Data

RLDHP:CELL=JU01613;

# Cell Config BPC Data

RLBDP:CELL=JP01732&JP01733;

# Cell Resources (CHRATE, STATE, ICMBAND etc)

RLCRP:CELL=JU01613;

# Radio X-ceiver ADM Managed Object Config Data (MO, TN, BPC etc)
RXCDP:MO=RXOTG-50;

# hALTED AND UNHALTED

RLSTC:CELL=.........,STATE=HALTED;
RLSTC:CELL=.........,STATE=ACTIVE;

# LIAT STATUS HALTED

RLSTP:CELL=.......;

# Liat Maxret
RLSBP:CELL=LP2741C;

# Add SDCCH
CTN=2&&4;
RLCCC:CELL=JP01732,CHGR=1,SDCCH=1,TN=2;

# RLCCC:CELL=HLM1,SDCCH=2,TN=1,CBCH=YES;
Assign 2 SDCCH/8 and a CBCH on time slot 1 in cell HLM1. As a CBCH is defined, one
SDCCH/8 will contain only 7 logical SDCCHs.

3.2 Example 2
RLCCC:CELL=HLM1,SDCCH=0;
Remove all SDCCH/8 from cell HLM1.

RLCCC:CELL=LP2741C,SDCCH=2;
Change sdcch became 2 sdcch from cell...

3.3 Example 3
RLCCC:CELL=HLM2,CHGR=1,SDCCH=9,CBCH=NO,TN=2;
Change the configuration of channel group 1 in cell HLM2 to have 9 SDCCH/8 in time
slot 2 with no CBCH.
RLCCC:CELL=CA2224B,CHGR=0,SDCCH=2,TN=1&2;

3.4 Example 4
RLCCC:CELL=HLM3,CHGR=0,SDCCH=2,CBCH=NO,CCHPOS=BCCH; (UTK R11)
The cell HLM3 will be assigned with 2 SDCCH/8 without CBCH on the BCCH frequency in
channel group 0. The first SDCCH/8 will be pl
aced on time slot 1 and the next on time slot 2.

# Cell Channel Group Data

RLDGP:CELL=JP01732&JP01733;

ACLC (Dynamic SDCCH)

# Melihat Status
RLACP:CELL=JP01732;

# Mengaktifkan
RLACI:CELL=JP01732;

# MENONAKTIFKAN
RLACE:CELL=JP01732;

# Merubah Stime dan Slevel

RLACC:CELL=JP01743,SLEVEL=1,STIME=30;

Delete ARFCN
RLCFE:CELL=ME0154C,DCHNO=53(BCCH NO);

Assign BCCH
RLCFI:CELL=ME0154C,DCHNO=53(BCCH NO);
Assign ARFCN 5 to channel group 0 in cell ME0154C.

RLCFI:CELL=ME0154C,CHGR=2,DCHNO=1&&4;
Assign ARFCNs 1 to 4, to channel group 2 in cell ME0154C.

# To decrease Blocking..>> can Make it HALF RATE (will decrease SQI)

RLDHP:CELL=ST1806A;
LIAT STATUS dha ON aTAU oFF

RLDHC:CELL=ME0154C,DHA=ON;
This example enables the function Dynamic HR Allocation in the cell ME0154C.

RLDHC:CELL=ME0154C,DHA=ON,DTHAMR=35,DTHNAMR=20;
This example enables the function Dynamic HR Allocation and changes threshold
parameters in the cell ME0154C.

RLDHC:CELL=ME0154C,DHA=OFF;
This example disables the function Dynamic HR Allocation in the cell ME0154C.

RLDHC:CELL=ME0154C,DTHAMR=35,DTHNAMR=20;
This example alters the threshold parameters in the cell ME0154C.

Access minimal (rxlev min yg bisa akses)

# rlssp:cell=all;
cek accmin all cell in the that bsc
# rlssp:cell=KB3730a;
Merubah accmin
# RLSSC:CELL=KB3730a,ACCMIN=100;

#fREK cHANGE
3.2 Example 2
RLCFE:CELL=HLM1,CHGR=1,DCHNO=5&&8;
Delete ARFCNs 5 to 8 from channel group 1 in cell HLM1.

------------------------------------------------------
ABOUT ALARM
------------------------------------------------------

# SPV of Logical Channel Alarmed Object Data

RLVAP;

# Radio X-ceiver Adm managed Obj Alarm Situation (Alarm Situation of Site)
RXASP:MOTY=RXOTG;

# Alarm Coonation data

RXALP:MOTY=RXOTG; (All TG)
RXALP:MO=RXOTG-50&-51; (TG 19 & 20)
RXALP:MO=RXOTG-87&&-88; (TG 19 hingga 22)
RXALP:MO=RXOTG-64, DETAILS; (+ Seluruh MO Classes)

# Alarm Administration Abis Path status

RXAPP:MOTY=RXOTG; (All TG)
RXAPP:MO=RXOTG-64&-65; (TG 19 & 20)
RXAPP:MO=RXOTG-87&&-88; (TG 19 hingga 22)

# Alarm List
ALLIP:PRCA=42;
ALLIP:PRCA=43;
ALLIP:ACL=A2;
ALLIP:ACL=A1;
ALLIP:ACL=A3;
ALLIP:ALCAT=BTS;

# Digital Path Quality

DTQUP:DIP=50RBL2&51RBL2;

Delete ARFCN
RLCFE:CELL=ME0154C,DCHNO=53(BCCH NO);

Assign BCCH
RLCFI:CELL=ME0154C,DCHNO=53(BCCH NO);
Assign ARFCN 5 to channel group 0 in cell ME0154C.

RLCFI:CELL=ME0154C,CHGR=2,DCHNO=1&&4;
Assign ARFCNs 1 to 4, to channel group 2 in cell ME0154C.

## Melihat Status ABL ato WO:

DTSTP:DIP=RBLT71;

RBLT>> TO MAKE SURE: ATAU NYARI RBLT:

RXAPP:MO=RXOTG-71;
RADEP:DEV=RBLT-2287;
Kalo di SNT/DEVP Tertulis ETM2-1 << pake SNT..MAKA LANJUT NTCOP...lalu liat range
RBLT dari hasil RXAPP.
NTCOP:SNT=ETRBLT-71;
rxmop:mo=rxotg-73;

RXTCP:MOTY=RXOTG,CELL=JB01653;
RXAPP:MO=RXOTG-130;
RADEP:DEV=RBLT2-1470;
NTCOP:SNT=ETM2-4;
DTQUP:DIP=87RBL2;
DTQDP:DIP=52RBL2&53RBL2;

RLTYP; (BSC SYSTEM TYPE DATA)

RLLBP; (BSC LOCATING DATA)
RLDCP;
RLLSP; (BSC LOAD SHARING STATUS)
RLOMP; (BSC BAND OPERATION)
RLDEP:CELL=ALL; (CELL DESC DATA)
RLACP:CELL=ALL; (ADAPT LOGICAL CHANNEL CONFIG)

nambah rblt:
rxapi:mo=rxotg-56,dev=rblt-1807,dcp=15;

ngecek status rblt:

stdep:dev=rblt-113;

Ngecek tramisi:
ntcop:snt=all;
rxapp:mo=rxotg-113;
radep:dev=rblt-3631;
dtstp:dip=rblt113;
dtstp:dip=84rbl2;
dtqup:dip=rblt113;

Reset klo slipnya gede:

dtqsr:dip=rblt113,unacc,degr;
dtqsr:dip=rblt149,ses,es,sf;
dtqsr:dip=rblt149,ses2,es2,sf;

3.1 Example 1
RXMOP:MO=RXoTG-1;
A printout of administration data relating to TG 1
in BTS logical model G01 is ordered.

3.2 Example 2
RXMOP:MO=RXoTRX-3-4;
A printout of administration data relating to TRXC 4
in TG 3 in BTS logical model G01 is ordered.

3.3 Example 3
RXMOP:MOTY=RXoRX;
A printout of administration data relating to all RXs
in BTS logical model G01 is ordered.

3.4 Example 4
RXMOP:MO=RXO-2-1&-2;

A printout of administration data relating to TXs 1

and 2 in TG 2 in BTS logical model G12 is ordered.

3.5 Example 5
RXMOP:MO=RXORX-2-1&RXOTX-2-1;
A printout of administration data relating to RX 1
and TX in TG 2 in BTS logical model G12 is ordered.

Dictionary Alarm
ABIS PATH UNAVAIL
There are not enough Abis paths defined in the TG.

BTS EXT AFFECTED

A fault external to the BTS equipment that leads to it not being able to perform
it's operational function.

BTS EXT UNAFFECTED

A fault external to the BTS equipment that does not affect its ability to perform
it's operational function.

BTS INT AFFECTED

A fault exists in a piece of equipment which is internal to the BTS and that leads
to that equipment not being able to perform it's operational function.

BTS INT UNAFFECTED

A fault internal to the BTS equipment that does not affect its ability to perform
it's operational function.

CON QUEUE CONGESTION

At least one of the LAPD Concentrator concentration outlet queues has reached an
unacceptable filling level.

FORLOPP RELEASE
Raised at the start of a TG Forlopp Release and automatically ceased on completion
of the TG Forlopp Recovery.

LMT INTERVENTION
A Local Maintenance Terminal (LMT) Intervention fault is due to local maintenance
activities in the BTS.

LOCAL MODE
The MO is in Local Mode, or the MO has changed from Local Mode to Remote Mode while
an OML fault exists.

LOOP TEST FAILED

An automatic loop test of the traffic carrying capabilities has failed.

MAINS FAILURE
A fault exists in a piece of BTS equipment which indicate a failure of power source
(either internal or external to the BTS) and which may affect the operation of the
BTS currently or in the future.

OML FAULT
A fault exists in the communications link between the BSC and the BTS. This alarm
includes faults in the transmission equipment and equipment in the BSC.

OPERATOR CONDITION
An abnormal condition has been detected in the BTS site which does not affect the
operational function of the BTS.

PERMANENT FAULT
An MO is classified as being permanently faulty when faults in the MO have occurred
and been cleared a certain number of times within a defined period of time. That
is, the MO is "unstable". Manual intervention is required to bring such an MO back
into operation.

TS SYNC FAULT
Synchronization has been lost on the uplink or downlink Transcoder and Rate
Adaptation Unit (TRAU) channels.

TGC FAULT
No active Transceiver Group Control (TGC) application exists in the TG. This is
only applicable to the G01 model. The fault can occur, for example, when
communication with an entire BTS is lost, or when all TRXCs in a BTS are manually
blocked.

<RXMOP:MO=RXOTG-22;
RADIO X-CEIVER ADMINISTRATION
MANAGED OBJECT DATA

MO RSITE AHOP COMB FHOP MODEL

RXOTG-22 DL788PAKKAT_MG HYB BB G12

SWVERREPL SWVERDLD SWVERACT

RBS2206J RBS2206J

CONFMD CONFACT TRACO

MINDIST 2 POOL

TGFID SIGDEL BSSWANTED

H'0000-8F27 LONG (IDR artinya)
normal (bukan IDR/TRANS BIASA)

TxDISSUL, TxDISSDL and TxDISSBL

TALIM and MAXTA

biasanya interference, check alarmnya dulu, berapa configurasi TRU yg terinstall,

berapa utilisasi erlangnya, ada event apa waktu itu perlu juga dicatat.

!!!SCRIPT!!!

RXTCP:MO=RXOTG-73;
RXMSC:MO=RXOTG-73,CONFACT=4;
RXBLI:MO=RXOTRX-73-0,FORCE,SUBORD;
RXESE:MO=RXOTRX-73-0,SUBORD;
RXESI:MO=RXOTRX-73-0,SUBORD;
RXBLE:MO=RXOTRX-73-0,SUBORD;
RXMDP:MOTY=RXOTS,DEV=RBLT-2355;
RXMDP:MOTY=RXOTS,DEV=RBLT-2354;
RXAPP:MO=RXOTG-73;
RXAPE:MO=RXOTG-73,DCP=18&19;
eaw BTMDN2
RXAPP:MO=RXOTG-273;
RXAPI:MO=RXOTG-273,DCP=18&19,DEV=RBLT-2354&-2355;
RXMOP:MO=RXOTG-273;
RXMOP:MO=RXOTG-73;
RXCDP:MO=RXOTG-273;
RXCDP:MO=RXOTG-73;

!!!LOG!!!
<RXCDP:MO=RXOTG-273;

RADIO X-CEIVER ADMINISTRATION

MANAGED OBJECT CONFIGURATION DATA

MO RESULT ARFCN MISMATCH

RXORX-273-0 CONFIG HOP NONE
RXORX-273-1 CONFIG HOP NONE
RXORX-273-2 CONFIG HOP NONE
RXORX-273-3 CONFIG HOP NONE
RXORX-273-4 CONFIG HOP NONE
RXORX-273-5 CONFIG HOP NONE

MO RESULT ARFCN TXAD TN BPC CHCOMB OFFS XRA ICM

RXOTS-273-0-0 CONFIG 701 0 0 6294 BCCH 0 NO ON
RXOTS-273-0-1 CONFIG HOP HOP 2 6290 TCH 0 NO ON
RXOTS-273-0-2 CONFIG HOP HOP 7 6285 TCH 0 NO ON
RXOTS-273-0-3 CONFIG HOP HOP 6 6268 TCH 0 NO ON
RXOTS-273-0-4 CONFIG HOP HOP 5 6262 TCH 0 NO ON
RXOTS-273-0-5 CONFIG HOP HOP 4 6256 TCH 0 NO ON
RXOTS-273-0-6 CONFIG HOP HOP 3 6249 TCH 0 NO ON
RXOTS-273-0-7 CONFIG HOP HOP 1 6216 TCH 0 NO ON
RXOTS-273-1-0 CONFIG HOP HOP 2 TCH 0 NO ON
RXOTS-273-1-1 CONFIG HOP HOP 7 6281 TCH 0 NO ON
RXOTS-273-1-2 CONFIG HOP HOP 6 6267 TCH 0 NO ON
RXOTS-273-1-3 CONFIG HOP HOP 5 6261 TCH 0 NO ON
RXOTS-273-1-4 CONFIG HOP HOP 4 6255 TCH 0 NO ON
RXOTS-273-1-5 CONFIG HOP HOP 3 6223 TCH 0 NO ON
RXOTS-273-1-6 CONFIG HOP HOP 1 6215 TCH 0 NO ON
RXOTS-273-1-7 SELECT
RXOTS-273-2-0 CONFIG HOP HOP 2 6288 SDCCH8 0 NO ON
RXOTS-273-2-1 CONFIG HOP HOP 7 6274 TCH 0 NO ON
RXOTS-273-2-2 CONFIG HOP HOP 6 6266 TCH 0 NO ON
RXOTS-273-2-3 CONFIG HOP HOP 5 6260 TCH 0 NO ON
RXOTS-273-2-4 CONFIG HOP HOP 4 6254 TCH 0 NO ON
RXOTS-273-2-5 CONFIG HOP HOP 3 6222 TCH 0 NO ON
RXOTS-273-2-6 CONFIG HOP HOP 1 6214 TCH 0 NO ON
RXOTS-273-2-7 SELECT
RXOTS-273-3-0 CONFIG HOP HOP 2 6286 SDCCH8 0 NO ON
RXOTS-273-3-1 CONFIG HOP HOP 7 6270 TCH 0 NO ON
RXOTS-273-3-2 CONFIG HOP HOP 6 6264 TCH 0 NO ON
RXOTS-273-3-3 CONFIG HOP HOP 5 6258 TCH 0 NO ON
RXOTS-273-3-4 CONFIG HOP HOP 4 6252 TCH 0 NO ON
RXOTS-273-3-5 CONFIG HOP HOP 3 6218 TCH 0 NO ON
RXOTS-273-3-6 CONFIG HOP HOP 1 6213 TCH 0 NO ON
RXOTS-273-3-7 SELECT
RXOTS-273-4-0 CONFIG HOP HOP 2 6287 SDCCH8 0 NO ON
RXOTS-273-4-1 CONFIG HOP HOP 7 6272 TCH 0 NO ON
RXOTS-273-4-2 CONFIG HOP HOP 6 6265 TCH 0 NO ON
RXOTS-273-4-3 CONFIG HOP HOP 5 6257 TCH 0 NO ON
RXOTS-273-4-4 CONFIG HOP HOP 4 6253 TCH 0 NO ON
RXOTS-273-4-5 CONFIG HOP HOP 3 6221 TCH 0 NO ON
RXOTS-273-4-6 SELECT
RXOTS-273-4-7 SELECT
RXOTS-273-5-0 CONFIG HOP HOP 2 6289 CBCH8 0 NO ON
RXOTS-273-5-1 CONFIG HOP HOP 7 6269 TCH 0 NO ON
RXOTS-273-5-2 CONFIG HOP HOP 6 6263 TCH 0 NO ON
RXOTS-273-5-3 CONFIG HOP HOP 5 6259 TCH 0 NO ON
RXOTS-273-5-4 CONFIG HOP HOP 4 6251 TCH 0 NO ON
RXOTS-273-5-5 CONFIG HOP HOP 3 6217 TCH 0 NO ON
RXOTS-273-5-6 SELECT
RXOTS-273-5-7 CONFIG HOP HOP 0 7058 TCH 0 NO ON

MO RESULT ARFCN TXAD BSPWR C0F MISMATCH

RXOTX-273-0 CONFIG 701 0 43 YES NONE
RXOTX-273-1 CONFIG 807 1 43 NO NONE
RXOTX-273-2 CONFIG 810 2 43 NO NONE
RXOTX-273-3 CONFIG 812 3 43 NO NONE
RXOTX-273-4 CONFIG 815 4 43 NO NONE
RXOTX-273-5 CONFIG 817 5 43 NO NONE

END

<RXMOP:MO=RXOTG-273;

RADIO X-CEIVER ADMINISTRATION

MANAGED OBJECT DATA

MO RSITE AHOP COMB FHOP MODEL

RXOTG-273 ME004BDN_MD HYB BB G12

SWVERREPL SWVERDLD SWVERACT

RBS2206J RBS2206J

CONFMD CONFACT TRACO

MINDIST 4 POOL

TGFID SIGDEL BSSWANTED

H'0001-ABFD NORMAL 100

END

<RXMOP:MO=RXOTG-273;

RADIO X-CEIVER ADMINISTRATION

MANAGED OBJECT DATA

MO RSITE AHOP COMB FHOP MODEL

RXOTG-273 ME004BDN_MD HYB BB G12

SWVERREPL SWVERDLD SWVERACT

RBS2206J RBS2206J

CONFMD CONFACT TRACO

MINDIST 4 POOL

TGFID SIGDEL BSSWANTED

H'0001-ABFD NORMAL 100
END

<RXAPP:MO=RXOTG-273;

RADIO X-CEIVER ADMINISTRATION

ABIS PATH STATUS

MO
RXOTG-273

DEV DCP APUSAGE APSTATE 64K TEI

RBLT-2356 20 UNCONC CF SIGNAL NO 61
RBLT-2357 21 CONC TRXC SIGNAL NO 2 3 4 5
RBLT-2358 22 CONC TRXC SIGNAL NO 0 1
RBLT-2359 23 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2360 24 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2361 25 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2362 26 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2363 27 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2364 28 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2365 29 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2366 30 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
RBLT-2367 31 MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO
MPLEX16 SPEECH/DATA NO

END

<RXMOP:MO=RXOTG-73;

RADIO X-CEIVER ADMINISTRATION

MANAGED OBJECT DATA
MO RSITE AHOP COMB FHOP MODEL
RXOTG-73 ME004BDN_MD HYB BB G12

SWVERREPL SWVERDLD SWVERACT

RBS2206J RBS2206J

CONFMD CONFACT TRACO

MINDIST 2 POOL

TGFID SIGDEL BSSWANTED

H'0001-6AE2 NORMAL 100

RRTPP:TRAPOOL=ALL;
RRTPP:TRAPOOL=ALL,PRINTDEV ;
RAEPP:ID=ALL;
RAEPC:PROP=SPEECHVERUSED-0;

RLPRP:CELL=PL4004B;
RLPRP:CELL=PL4004C;
RLPRP:CELL=PL4004CE;
RLPRP:CELL=PL4004E;

C7SPP:SP=ALL;

Alarm indication signal :

LOF
Loss of frame alignment
ERATE
Excessive error rate
RDI
Remote deFect indication (REFF in some AI2 documents)
AISM
Alarm indication signal in time slot 16
LOMF
Loss of multiframe alignment
REFM
Alarm indication from the remote end signalling equipment
ALL1
Alarm indication signal
LOS
Loss of incoming signal
CSES
Consecutive severely errored seconds
PFNT1
Power failure NT1
EFCDLD
Reception of AIS at LT
EFC1
AUXP (LOS at line side of LT)
EFC2
Loss of frame alignment at TE/NT2
EFC3
Loss of signal at line side of NT1
EFC4
Loss of frame alignment at NT1
UILOOP
Unintentional loopback
ISA
Incoming send alarm
TNR1
Alarm indication (Transmission not ready 1)
TNR2
Alarm indication (Transmission not ready 2)

NGILANGIN OCON
halted dulu
RXBLI:
rxese:
RXTEI:MO=RXOCON
Rxesi:
RXBLE:

The function block RBLT is part of the Radio Transmission and Transport Subsystem
(RTS) in APT.
RBLT provides and administrates data for the RBLT, RBLT2, RBLT3, RBLT15, RBLT24 and
RBLT96 devices.
An RBLT device is a 64 kbps channel on the 2.048 Mbps link-
between the Base Station Controller (BSC) and Base Transceiver Station (BTS).
RBLT devices are used for transmission type E1. The block RBLT handles RBLT
devices.
An RBLT2 device is a 64 kbps channel on the 155.520 Mbps link between the BSC and
BTS,
terminating on 1 board ET155 (European Telecomunications Standards Institute -
ETSI) H/W.
RBLT2 devices are used for transmission type STM-1, terminating on 1 board ET155
H/W.
The block RBLT2 handles RBLT2 devices.

STATISTIK

login name: eidretno

eidretno's password: Last login: Mon Jul 10 12:15:28 2006 from 10.2.131.71
Sun Microsystems Inc. SunOS 5.8 Generic Patch February 2004
You have mail.
eidretno@jktmas1o> cd..
eidretno@jktmas1o> cd /home/eidanhair/scripts
eidretno@jktmas1o> ls-l
eidretno@jktmas1o> /home/eidanhair/scripts/apgnwsrc11

----------------------------------------------------
Welcome to OSS RC1.1 STS Raw Data Collection

Tinem Project Telkomsel - APG Only

----------------------------------------------------

Please Enter your OSS login id (e.g. eric) : eidretno

Please Enter the BSC name (e.g. BSH1) : BPSP1

Please Enter the date MMdd (e.g. 1108) : 0710

Todays Date = 07/10/06
Start Time = 12:17:02

Create temporary directory /home/eidretno/temp19668

Removing unwanted files

/home/eidretno/temp19668/*tf*: No such file or directory

Zipping the files

zip error: No such file or directory

zip error: Could not create output file (/home/eidretno/nws/0710.BPSP1.zip)

Removing temporary directory /home/eidretno/temp19668

Your output file is /home/eidretno/nws/0710.BPSP1.zip

Finish Time = 12:17:06

Thank you eidretno for using apgnwsrc11. Have a nice day.

eidretno@jktmas1o> ls
F f local.cshrc.old local.profile
cha fha local.login local.profile.old
core local.cshrc local.login.old ops
eidretno@jktmas1o> cd..
cd..: Command not found.
eidretno@jktmas1o> ls
F f local.cshrc.old local.profile
cha fha local.login local.profile.old
core local.cshrc local.login.old ops
eidretno@jktmas1o> cd /home
eidretno@jktmas1o> ls
abdus david eidwilly irmawan ridho wisnu
achmad eidanhair enpjpqu iswan rommy yoga
ali eidedica fahmi mridwan royh yohanes_eko
andis eidjaka faisal mudjahid rustam yurianda
andit eidmar harun nmsadm thomas
bayu eidprima henryganda nurdin trim
budi eidretno ingan ossuser wawan
eidretno@jktmas1o> cd eidretno
eidretno@jktmas1o> ls
F f local.cshrc.old local.profile
cha fha local.login local.profile.old
core local.cshrc local.login.old ops
eidretno@jktmas1o> cd /home/eidretno
eidretno@jktmas1o> ls
F f local.cshrc.old local.profile
cha fha local.login local.profile.old
core local.cshrc local.login.old ops
eidretno@jktmas1o> md nws

CORRECT>mdb nws (y|n|e|a)? yes

mdb: failed to open nws: No such file or directory
eidretno@jktmas1o>
eidretno@jktmas1o> mkdir nws
eidretno@jktmas1o> ls
F fha local.login.old ops
cha local.cshrc local.profile
core local.cshrc.old local.profile.old
f local.login nws
eidretno@jktmas1o> /home/eidanhair/scripts/apgnwsrc11

----------------------------------------------------
Welcome to OSS RC1.1 STS Raw Data Collection

Tinem Project Telkomsel - APG Only

----------------------------------------------------

Please Enter your OSS login id (e.g. eric) : eidretno

Please Enter the BSC name (e.g. BSH1) : BPSP1

Please Enter the date MMdd (e.g. 1108) : 0710

Todays Date = 07/10/06

Start Time = 12:18:58

Create temporary directory /home/eidretno/temp20835

Removing unwanted files

/home/eidretno/temp20835/*tf*: No such file or directory

Zipping the files

adding: C20060710.0000-20060710.0100_BPSP1:1002 (deflated 91%)
adding: C20060710.0000-20060710.0100_BPSP1:1003 (deflated 90%)
adding: C20060710.0000-20060710.0100_BPSP1:1004 (deflated 91%)
adding: C20060710.0000-20060710.0100_BPSP1:1005 (deflated 88%)
adding: C20060710.0000-20060710.0100_BPSP1:1006 (deflated 86%)
adding: C20060710.0000-20060710.0100_BPSP1:1007 (deflated 61%)
adding: C20060710.0100-20060710.0200_BPSP1:1002 (deflated 91%)
adding: C20060710.0100-20060710.0200_BPSP1:1003 (deflated 90%)
adding: C20060710.0100-20060710.0200_BPSP1:1004 (deflated 91%)
adding: C20060710.0100-20060710.0200_BPSP1:1005 (deflated 89%)
adding: C20060710.0100-20060710.0200_BPSP1:1006 (deflated 86%)
adding: C20060710.0100-20060710.0200_BPSP1:1007 (deflated 61%)
adding: C20060710.0200-20060710.0300_BPSP1:1002 (deflated 91%)
adding: C20060710.0200-20060710.0300_BPSP1:1003 (deflated 89%)
adding: C20060710.0200-20060710.0300_BPSP1:1004 (deflated 91%)
adding: C20060710.0200-20060710.0300_BPSP1:1005 (deflated 88%)
adding: C20060710.0200-20060710.0300_BPSP1:1006 (deflated 86%)
adding: C20060710.0200-20060710.0300_BPSP1:1007 (deflated 61%)
adding: C20060710.0300-20060710.0400_BPSP1:1002 (deflated 91%)
adding: C20060710.0300-20060710.0400_BPSP1:1003 (deflated 89%)
adding: C20060710.0300-20060710.0400_BPSP1:1004 (deflated 91%)
adding: C20060710.0300-20060710.0400_BPSP1:1005 (deflated 88%)
adding: C20060710.0300-20060710.0400_BPSP1:1006 (deflated 86%)
adding: C20060710.0300-20060710.0400_BPSP1:1007 (deflated 61%)
adding: C20060710.0400-20060710.0500_BPSP1:1002 (deflated 90%)
adding: C20060710.0400-20060710.0500_BPSP1:1003 (deflated 89%)
adding: C20060710.0400-20060710.0500_BPSP1:1004 (deflated 90%)
adding: C20060710.0400-20060710.0500_BPSP1:1005 (deflated 87%)
 adding: C20060710.0400-20060710.0500_BPSP1:1006 (deflated 85%)
adding: C20060710.0400-20060710.0500_BPSP1:1007 (deflated 61%)
adding: C20060710.0500-20060710.0600_BPSP1:1002 (deflated 90%)
adding: C20060710.0500-20060710.0600_BPSP1:1003 (deflated 89%)
adding: C20060710.0500-20060710.0600_BPSP1:1004 (deflated 90%)
adding: C20060710.0500-20060710.0600_BPSP1:1005 (deflated 87%)
adding: C20060710.0500-20060710.0600_BPSP1:1006 (deflated 85%)
adding: C20060710.0500-20060710.0600_BPSP1:1007 (deflated 61%)
adding: C20060710.0600-20060710.0700_BPSP1:1002 (deflated 90%)
adding: C20060710.0600-20060710.0700_BPSP1:1003 (deflated 89%)
adding: C20060710.0600-20060710.0700_BPSP1:1004 (deflated 90%)
adding: C20060710.0600-20060710.0700_BPSP1:1005 (deflated 87%)
adding: C20060710.0600-20060710.0700_BPSP1:1006 (deflated 85%)
adding: C20060710.0600-20060710.0700_BPSP1:1007 (deflated 60%)
adding: C20060710.0700-20060710.0800_BPSP1:1002 (deflated 90%)
adding: C20060710.0700-20060710.0800_BPSP1:1003 (deflated 89%)
adding: C20060710.0700-20060710.0800_BPSP1:1004 (deflated 90%)
adding: C20060710.0700-20060710.0800_BPSP1:1005 (deflated 87%)
adding: C20060710.0700-20060710.0800_BPSP1:1006 (deflated 85%)
adding: C20060710.0700-20060710.0800_BPSP1:1007 (deflated 61%)
adding: C20060710.0800-20060710.0900_BPSP1:1002 (deflated 89%)
adding: C20060710.0800-20060710.0900_BPSP1:1003 (deflated 89%)
adding: C20060710.0800-20060710.0900_BPSP1:1004 (deflated 90%)
adding: C20060710.0800-20060710.0900_BPSP1:1005 (deflated 87%)
adding: C20060710.0800-20060710.0900_BPSP1:1006 (deflated 84%)
adding: C20060710.0800-20060710.0900_BPSP1:1007 (deflated 61%)
adding: C20060710.0900-20060710.1000_BPSP1:1002 (deflated 89%)
adding: C20060710.0900-20060710.1000_BPSP1:1003 (deflated 89%)
adding: C20060710.0900-20060710.1000_BPSP1:1004 (deflated 90%)
adding: C20060710.0900-20060710.1000_BPSP1:1005 (deflated 87%)
adding: C20060710.0900-20060710.1000_BPSP1:1006 (deflated 85%)
adding: C20060710.0900-20060710.1000_BPSP1:1007 (deflated 61%)

Removing temporary directory /home/eidretno/temp20835

Your output file is /home/eidretno/nws/0710.BPSP1.zip

Finish Time = 12:19:03

Thank you eidretno for using apgnwsrc11. Have a nice day.

kalo confact 4,biasanya 1 device = 4 TRU,jadi agak berat...64kbps / 4 = MPLEX 16

itu sama juga kalo kita buang CONC nya diganti MPLEX16#######

##########################################################3
Mo Liat RBLT ini kepunyaan TS dan TRX brapa:

RXMDP:MO=RXOTS-72-1-3;
RXMDP:MOTY=RXOTS,DEV=RBLT2-1944;

Mau ngeblock RBLT-nya:

BLODI:DEV=RBLT2-1944;

Unblocked RBLT - nya:

BLODE:DEV=RBLT2-1944;

Mo liay RBLTnya ke ak:

STDEP:DEP=RBLT2-1944;
##############################################################3

kalo reasonnya, "abnormal release, unspecified " kemungkinan itu di hardware bts
atau transmisi..

Kalo Ada BPC FAIL, Define RXOTS nya :

RXESE,RXMOE,RXMOI,RXESI,RXBLE

eidretno@jktmas1o> cd..
cd..: Command not found.
eidretno@jktmas1o> cd /home/eidanhair/scripts
eidretno@jktmas1o> ls-l

CORRECT>ls-F (y|n|e|a)? yes

aapgnwsrc11.c* aiognwsrc11.c* apgnwsrc11* borneo* iognwsrc11*
eidretno@jktmas1o> /home/eidanhair/scripts/apgnwsrc11

----------------------------------------------------
Welcome to OSS RC1.1 STS Raw Data Collection

Tinem Project Telkomsel - APG Only

----------------------------------------------------

Please Enter your OSS login id (e.g. eric) : eidretno

Please Enter the BSC name (e.g. BSH1) : BTBNA2

Please Enter the date MMdd (e.g. 1108) : 1116

Todays Date = 11/17/06

Start Time = 14:25:21

Create temporary directory /home/eidretno/temp9439

Removing unwanted files

/home/eidretno/temp9439/*tf*: No such file or directory

#######################################
MO LIAT MSC NYA:
#######################################
# C7LTP:LS=ALL;
<C7LTP:LS=ALL;
CCITT7 LINK SET STATE

LS SPID SLC STATE INHIBST FCODE INFO

2-6247 TMDN20 00 RESTORING 104 H'0
01 RESTORING 110
02 ACTIVE
03 ACTIVE
04 ACTIVE
05 ACTIVE
06 ACTIVE
07 ACTIVE
2-6309 MMDN7 00 RESTORING 104 H'0
01 ACTIVE
02 ACTIVE
03 ACTIVE
04 RESTORING 104 H'0
05 RESTORING 104 H'0
06 ACTIVE
07 ACTIVE
08 ACTIVE
09 ACTIVE
10 ACTIVE
11 ACTIVE
12 ACTIVE
13 ACTIVE
14 ACTIVE
15 ACTIVE

# C7SPP:SP=ALL;
<C7SPP:SP=ALL;
CCITT7 SIGNALLING POINT DATA

SP SPID
2-6665 OWNSP BLSM3
2-6247 TMDN20
2-6309 MMDN7

==========================================================================
//RIR RECORDING

!RIR Preparation!
DBTSP:TAB=AXEPARS,SETNAME=CME20BSCF,NAME= RADIOINTREC;
!If the value=0 then ask for the authorize person to activate the feature!

!Recording!
RARDP:RID=RIRID00; !Check Cell recording Config!
RARRP:RID=RIRID00; !Check Recording status!

RARIE:RID=RIRID00; !Stop recording!

RARII; !Allocate RIRID00 for recording!

RARDC:RID=RIRID00,CELL=ALL,CSYSTYPE=GSM1800;
RARDC:RID=RIRID01,CELL=ALL,CSYSTYPE=GSM1800; !Sellect all GSM cell!

RARDC:RID=RIRID01,CELL=ALL,CSYSTYPE=GSM1800,REM; !Remove all GSM cell!

RARCI:RID=RIRID00; !Configure the TRX for recording!

RARRI:RID=RIRID00,DTIME=180,RESET; !Recording 120 min, all counter reset!

RARRE:RID=RIRID00; !Stop recording!

!Transfer to TMOS!
!Untuk APG!
RARTI:RID=RIRID00,PERCVAL=900;! put the RIRID00 to RIRFIL00 with 100 percentile!

!Untuk IOG!
INMCT:SPG=0; !Access the Hardisk!
INFIP:FILE=RIRFIL00;!Check files!
INFIP:FILE=RIRFIL00-0004;! print the size of file RIRFIL00-0004!
END;
INFTI:FILE=RIRFIL00-0004,dest=tmos; !Transfer the file to TMOS Manually!

//MRR RECORDING
!Preparation!
//Create output directory
aploc;
L:
cd \fms\data\cpf\exchvolume\
cpfmkfile -l 512 -f inf MRRFIL00 exchvolum

?//APG
?C:\>cpfmkfile -f inf -l 512 -r MRRFIL00 EXCHVOLUME

//IOG
INFII:FILE=MRRFIL00,VOL=EXCHVOLUME,RLENGTH=512,SIZE=1300,EXP=500,TYPE=SEQ,FCLASS=CM
P;

//BAR Recording

RABDP:RID=BARID00;!Check BAR ID!

RABRP:RID=BARID00;!to check the BARID00 configuration!
RABIE:RID=BARID00;!Release!
RABII;!Create and define the new BARID00!

! This will allocate BARID00!

RABDC:RID=BARID00,CELL=ALL, NCELLTYPE=BOTH;!Both (Define & Undefine)!
RABDC:RID=BARID01,CELL=ALL,CSYSTYPE=GSM1800, NCELLTYPE=BOTH;!Both (Define &
Undefine)!

!Select ARFCN and set Relative SS thr 1= + 3 , Relative SS thr 2 = -3 and

absolute = -(75 to 74)!
RABDC:RID=BARID00,TMBCCHNO=687&&709&51&&87,RELSSP=3,RELSS2N=3,ABSS=75;
RABDC:RID=BARID01,TMBCCHNO=687&&709&51&&87,RELSSP=3,RELSS2N=3,ABSS=75;
RABDP:RID=BARID00;! to print the change of BARID00 Configuration!

//Start BAR Recording

RABRI:RID=BARID00,DTIME=180,MRNIC;
RABRE:RID=BARID00;!End recording!
RABRP:RID=BARID00;!Check Rec Status!
RABTI:RID=BARID00,IO=FILE; !Transfer file!

//Check file
INMCT:SPG=0;
INFIP:FILE=BARFIL00; !Check file!
INFIP:FILE=BARFIL00-0003;!Check size!
END;
INFTI:FILE=BARFIL00-0004,dest=tmos; !Transfer file!
!var/opt/ehpt/eac/data/fs ..specific BSC!

//MRR Recording

RAMDP:RID=MRRID00; !to check the MRRID00 configuration!

RAMRP:RID=MRRID00;!to check the MRRID00 status!

RAMIE:RID=MRRID00;!Release MRRID00!

RAMII;! This will allocate MRRID00!

!select cell!
RAMDC:RID=MRRID00,CELL=ALL;
RAMDC:RID=MRRID00,CELL=ALL,csystype=gsm900;
RAMDC:RID=MRRID01,CELL=ALL,csystype=gsm1800;
RAMDC:RID=MRRID00,CELL=lp2056g;
!Remove cell!
RAMDC:RID=MRRID00,CELL=rp4577b&ki4045c,REM;
!Start recording!
RAMRI:RID=MRRID00,DTIME=180,RESET;
!Check recording status!
RAMRP:RID=MRRID00;!to check the MRRID00 status!
!end recording!
RAMRE:RID=MRRID01;

!Tranfer Recording!
!for APG!
ramti:rid=mrrid00;

!For IOG!
inmct:spg=0;
infip:file=mrrfil01;
infip:file=mrrfil00-0035;
end;
infti:file=mrrfil00-0035,dest=oss;

//Check Alarm

RXMFP:mo=rxotg-383,faulty,subord;
ALLIP; !Check Alarm!
allip:ALCAT=bts;

IOEXP;
RXTCP:MOTY=RXOTG,CELL=bp4132d; !CHECK TG NUMBER!
RXTCP:MOTY=RXOTG; !Check TG Number !
RXMOP:MOTY=RXOTG; !Check sofware version!
RXMOP:MO=RXOTG-42;
RXMOP:MO=RXOTX-33-0&-1&-4&&-9;
RXASP:MOTY=RXOTG; !check alarm situation!
RXASP:MO=RXOTG-53; !check alarm situation at specified TG!
RXASP:MO=RXOCF-42;
RXASP:MO=RXOis-16;
RXMFP:MO=RXOTRX-28-0&&-5;

RXMFP:MO=RXOIS-16;
RXMFP:MO=RXOCF-25;
RXMFP:MO=RXOTG-42;
RXMFP:MO=RXOtX-6-6;
RXMFP:MO=RXORX-76-9;
RXMFP:MO=RXOCON-91;
RXMFP:MOTY=RXOCF,FAULTY;
RXELP:MO=RXOCF-14; !Alarm log!
RXMFP:MOTY=RXOCON,FAULTY;
RXMFP:MOTY=RXODP,FAULTY;
RXMFP:MOTY=RXOTRX,FAULTY;
RXMFP:MOTY=RXORX,FAULTY;
RXMFP:MOTY=RXOTS,FAULTY;
RXMSP:MOTY=RXOTRX; !Check Status TRX!
RXMSP:MO=RXOIS-223;
RXMSP:MO=RXOTRX-57-10;
RXCDP:MO=RXOTG-52;
RXMOP:MO=RXOTG-57; !Check Con FACT!

//Block DeBlock
RXBLI:MO=RXOIS-223;
RXBLE:MO=RXOIS-223;

//Check transcoder
rrtpp:trapool=all;

//Reset CELL
RXTCP:MOTY=RXOTG,CELL=bp4154a; !CHECK TG NUMBER!
rxcdp:mo=rxotg-42;
rlstc:cell=pk4626b,state=halted;
rxbli:mo=rxotrx-47-4,subord,force;
rxbli:mo=rxotrx-47-5,subord,force;
rxbli:mo=rxotrx-47-6,subord,force;
rxbli:mo=rxotrx-47-7,subord,force;
rxese:mo=rxotrx-47-4,subord; !wait!
rxese:mo=rxotrx-47-5,subord; !wait!
rxese:mo=rxotrx-47-6,subord; !wait!
rxese:mo=rxotrx-47-7,subord; !wait!
rxesi:mo=rxotrx-47-8,subord;
rxesi:mo=rxotrx-47-9,subord;
rxesi:mo=rxotrx-115-6,subord;
rxesi:mo=rxotrx-115-7,subord;
rxble:mo=rxotrx-47-8,subord; !wait!
rxble:mo=rxotrx-47-9,subord; !wait!
rxble:mo=rxotrx-51-1,subord; !wait!
rxble:mo=rxotrx-115-7,subord; !wait!
rlstc:cell=pk4626b,state=active;
rxcdp:mo=rxotg-115;
rlcrp:cell=pk4626b;

//unblock TX
RXTCP:MOTY=RXOTG,CELL=du1121f; !CHECK TG NUMBER!
rxmsp:mo=rxotx-24-1;
rxbli:mo=RXOTS-75-5-0,force;
rxese:mo=RXOTS-75-5-0;
rxesi:mo=RXOTS-75-5-0; !wait!
rxble:mo=RXOTS-75-5-0;
rxcdp:mo=rxotg-11;

//Reset TG
RXTCP:MOTY=RXOTG,CELL=pe0326e; !CHECK TG NUMBER!
rxcdp:mo=rxotg-379;

rlstc:cell=pe0326f,state=halted;
rlstc:cell=bl2258b,state=halted;
rlstc:cell=bl2258c,state=halted;

rxbli:mo=rxotg-118,subord,force;
rxese:mo=rxotg-118,subord;
rxesi:mo=rxotg-118,subord; !wait for loading!
rxble:mo=rxotg-118,subord;

rlstc:cell=pe0326e,state=active;
rlstc:cell=bl2258b,state=active;
rlstc:cell=bl2258c,state=active;
rxcdp:mo=rxotg-379;
rxmop:mo=rxotg-379;

//TS Loop test

RXMSP:MO=RXOTS-57-10-0;
RXBLI:MO=RXOTS-57-10-0,force;
RXESE:MO=RXOTS-57-10-0;
RXESI:MO=RXOTS-57-10-0; !wait!
rxlti:mo=rxots-57-10-0; !Loop Test!
RXBLE:MO=RXOTS-57-10-0;

//*****cek transmissi Slip

RXTCP:MOTY=RXOTG,CELL=th5285F; !Get #TG!
RXAPP:MO=RXOTG-42; !Get RBLT!
RADEP:DEV=RBLT-3152; !Get SNT!
NTCOP:SNT=etrblt-98; !Get DIP Name!
DTQUP:DIP=rblt98; !Check Transmission Slip!

//Get DEV number (Object ID) for LAPD Stats

RXMDP:MO=RXOTRX-19-0;

//Check transmission quality 15 min interval

DTQHI:DIP=RBLT19; !start recording!
DTQHP:DIP=RBLT19; !Print!
DTQHE:DIP=RBLT19; !stop!

//*********SD Time slot!

RLCFP:cell=bp4121d; !print SD config!
RLCCC:CELL=JS06883,CHGR=0,SDCCH=4,TN=2&&5; !create 4 SD, CHGR0!
RLCCC:CELL=JS06883,CHGR=1,SDCCH=1,TN=2; !create 1 SD CHGR1!

//**********Half Rate!
RLDHP:cell=JP01204; !Print status!
RLDHC:cell=JP01204,DHA=ON; !turn on Dynamic Half Rate!

//**********lain-lain!
RLSSP:CELL=me0083e; !Check ACCMIN!
RLSSC:CELL=ME0086g,ACCMIN=90;
RLSBP:CELL=ME0083g; !cek CRO !
RLSBC:CELL=ME0083g,CRO=14;
RLLHP:CELL=me0832g; !CEK LAYERTHR !
RLCFP:CELL=32331; !DCHNO
RLLHC:CELL=ME0832g,LAYERTHR=85;
RLDEP:CELL=bj1110d; !CHECK BCCH, CGI!
RLCFP:CELL=BJ1110d; !Check frequency!
RLSTP:CELL=BP4101A; !CEK SITE STATUS!
RLCPP:CELL=JK10411; !Check Power !
RLCHP:CELL=JK10411; !Check HOP+HSN !
RLCXP:CELL=JK10411; !CHECK DTX !
RLLOP:CELL=JK20551; !CHECK LOCATING+ POWER!
RLLDP:CELL=JK20551; !RL LINK !
RLHBP; !CEK HCS !
RLHPP:CELL=JK20551; !CHAP !
RLCRP:CELL=JK20551; !CEK RADIO RESOURCES!
RLIMP:CELL=JK20551; !IDLE CHANNEL MEASUREMENT !
RLLCP:CELL=JK20551; !CELL LOAD SHARING !
RLPCP:CELL=JK20551; !MS POWER CONTROL !
RLBCP:CELL=JK20551; !BTS POWER CONTROL !
RLGRP:CELL=JK20551; !GPRS RESOURCES !
RLGSP:CELL=JK20551;
RLSLP:CELL=JK20551; !CHANNEL SPV !
RRGBP; !GB !
RLDHP:CELL=JK20551;
RLDMP:CELL=JK20551; !DYNAMIC FR/HR !
RLGNP:CELL=JK20551,CELLR=ALL; !GPRS NEIGHBORS !
RLGAP:CELL=PX1782; ! ODPDCHLIMIT

===================================================================================
==========
CHECK PARAMETERS OF CDD (CELL DESIGN DATA)
-----------------------------------------------------------------------------------
----------
CACLP;
IOEXP;
DBTSP:TAB=AXEPARS;
DBTSP:TAB=SAEFAULTS;
PLLDP;
RAEPP:ID=ALL;
RLCAP;
RLDCP; !DIFF. CHANNEL ALLOCATION DATA!
RLLBP; !LOCATING BSC DATA!
RLLSP; !BSC LOAD SHARING DATA!
RLOMP; !CELL BSC BAND OPERATING MODE!
RLTYP; !CELL SYSTEM TYPE!
RLVAP;
RLVLP; !SUPERVISION OF LOGICAL CHANNEL!
SAAEP:SAE=ALL;
SAACP:SAE=ALL;
RLSTP:CELL=ALL; !CELL STATUS!
RLDEP:CELL=ALL; !INTERNAL CELL DESCRIPTION DATA!
RLDEP:CELL=ALL,EXT; !INTERNAL CELL DESCRIPTION DATA!
RLCPP:CELL=ALL; !CONFIGURATION POWER DATA!
RLCPP:CELL=ALL,EXT; !CONFIGURATION POWER DATA!
RLLOP:CELL=ALL; !CELL LOCATING DATA!
RLLOP:CELL=ALL,EXT; !CELL LOCATING DATA!
RLLHP:CELL=ALL; !LOCATING HIERARCHICAL!
RLLHP:CELL=ALL,EXT; !LOCATING HIERARCHICAL!
RLLLP:CELL=ALL;
RLCFP:CELL=ALL; !CONFIGURATION FREQUENCY DATA!
RLNRP:CELL=ALL; !CELL NEIGHBORING RELATION!
RLMFP:CELL=ALL; !CELL MEASUREMENT FREQUENCY!
RLACP:CELL=ALL; !ADAPTIVE SDCCH CONFIGURATION!
RLBCP:CELL=ALL; !DYNAMIC BTS POWER CONTROL CELL!
RLBDP:CELL=ALL; !CELL CONFIGURATION BCP DATA!
RLCDP:CELL=ALL;
RLCHP:CELL=ALL; !CONFIGURATION FREQUENCY HOPPIN!
RLCRP:CELL=ALL; !CELL RESOURCE!
RLCXP:CELL=ALL; !CONFIGURATION DTX DOWNLINK!
RLDGP:CELL=ALL;
RLDRP:CELL=ALL;
RLDTP:CELL=ALL;
RLGRP:CELL=ALL;
RLGSP:CELL=ALL;
RLHPP:CELL=ALL;
RLIHP:CELL=ALL; !CELL LOCATING INTRACELL HANDOVER!
RLIMP:CELL=ALL; !IDLE CHANNEL MEASUREMENT!
RLLCP:CELL=ALL; !CELL LOAD SHARING!
RLLDP:CELL=ALL; !CELL LOCATING DISCONNECT DATA!
RLLFP:CELL=ALL; !CELL LOCATING FILTER DATA!
RLLPP:CELL=ALL; !CELL LOCATING PENALTY DATA!
RLLUP:CELL=ALL; !CELL LOCATING URGENCY DATA!
RLOLP:CELL=ALL;
RLPBP:CELL=ALL;
RLPCP:CELL=ALL; !DYNAMIC MS POWER CONTROL CELL!
RLPRP:PP=ALL;
RLPRP:CELL=ALL;
RLSBP:CELL=ALL; !SYSTEM INFORMATION BCCH!
RLSLP:CELL=ALL; !SUPERVISION OF LOGICAL CHANNEL AVAILABILITY!
RLSMP:CELL=ALL;
RLSSP:CELL=ALL; !SYSTEM INFORMATION SACCH AND BCCH!
RLHBP; !HCS!
RLSUP:CELL=ALL;
RLUMP:CELL=ALL;
RLADP:SET=ALL;
RLAPP:CELL=ALL;
RLDMP:CELL=ALL;
RLDHP:CELL=ALL;
RLGAP:CELL=ALL;
RLGNP:CELL=ALL;
RLGQP:CELL=ALL;
RLMBP:ID=ALL;
RLPSP:CELL=ALL;
RLPSP:CELL=ALL,EXT;
RRGBP;

RLGSI:CELL=YEH001A; ! ACTIVATE GPRS SUPPORT;

RLGSC:CELL=YEH001A,FPDCH=0,GAMMA=XX,PDCHALLOC=NOPREF; ! DEFINE GPRS CELL DATA;
RLCDC:CELL=YEH001A,MC=ON; !EGPRS/EDGE!

===================================================================================
=========
CHECK STATUS OF MANAGE OBJECT
-----------------------------------------------------------------------------------
---------

IOEXP;
CACLP;
RXTCP:MOTY=RXOTG,CELL=YEH001A;
RXTCP:MO=RXOTG-99;
RXTCP:MO=RXETG-99;
RXMOP:MO=RXOTG-99;
RXMOP:MO=RXETG-99;
RXAPP:MO=RXOTG-99;
RXMOP:MO=RXOCF-99;
RXMOP:MO=RXOCON-99;
RXMOP:MO=RXOTF-99;
RXMOP:MO=RXETF-99;
RXMOP:MO=RXOTRX-99-0;
RXMOP:MO=RXETRX-99-0;
RXMOP:MO=RXOTX-99-0;
RXMOP:MO=RXETX-99-0;
RXMOP:MO=RXORX-99-0;
RXMOP:MO=RXERX-99-0;
RXMSP:MO=RXOTG-99;
RXMSP:MO=RXETG-99;
RXMSP:MO=RXOCF-99;
RXMSP:MO=RXOCON-99;
RXMSP:MO=RXOTF-99;
RXMSP:MO=RXETF-99;
RXMSP:MO=RXOTRX-99-0;
RXMSP:MO=RXETRX-99-0;
RXMSP:MO=RXOTX-99-0;
RXMSP:MO=RXETX-99-0;
RXMSP:MO=RXORX-99-0;
RXMSP:MO=RXERX-99-0;
RXMDP:MO=RXOTRX-99-0;
RXMFP:MO=RXOCF-99;
RXMFP:MO=RXOCON-99,FAULTY;
RXMFP:MO=RXOTF-99,FAULTY;
RXMFP:MO=RXOTRX-99-0;
RXMFP:MO=RXOTX-99-0,FAULTY;
RXMFP:MO=RXORX-99-0,FAULTY;
RXMFP:MO=RXOTS,FAULTY;
RXASP:MO=RXOTG-99;
RXASP:MO=RXETG-99;
RXELP:MO=RXOCF-99;
RXELP:MO=RXOCON-99;
RXELP:MO=RXOTF-99;
RXELP:MO=RXETF-99;
RXELP:MO=RXOTRX-99-0;
RXELP:MO=RXETRX-99-0;
RXELP:MO=RXOTS-99-0-0&&-7;
RXELP:MO=RXETS-99-0-0&&-7;
RXELP:MO=RXOTX-99-0;
RXELP:MO=RXETX-99-0;
RXELP:MO=RXORX-99-0;
RXELP:MO=RXERX-99-0;
DTDIP:DIP=ALL;
DTQUP:DIP=ALL;
DTSTP:DIP=ALL;
NTCOP:SNT=ALL;
NTSTP:SNT=ALL;
EXEMP:RP=ALL,EM=ALL;
EXRPP:RP=ALL;
EXRUP:RP=ALL;
ALLIP;
RASAP;
RASIP;
RRMSP:TRAPOOL=ALL;
RRTPP:TRAPOOL=ALL;
RAHEP;
RAHHP:SNT=ALL;
RAHLP;
RAHPP;

===================================================================================
========
COMMAND IN MSC
-----------------------------------------------------------------------------------
--------

MGCEP:CELL=YEH001A; !MOBILE TELEPHONY CELL,PRINT!

MGOCP:CELL=YEH001A; !OUTER CELL PRINT!
MGLAP; !LOCATION AREA!
CACLP;
IOEXP;
ALLIP;
DBTSP:TAB=AXEPARS;
SAAEP:SAE=ALL;
MGADP;
MGEPP:ID=ALL;
MGBSP:BSC=ALL;
MGNMP:MSC=ALL;
MGRLP:LAI=ALL;
MGSVP;
MGIDP;

===================================================================================
========
BSC EXCHANGE PROPERTIES
-----------------------------------------------------------------------------------
--------

RAEPC:PROP=GPRSNWMODE-2; ! GPRS NETWORK MODE OF OPERATION 2 !

RAEPC:PROP=CHCODING-2; ! GPRS CHANNEL CODING SCHEME IS 2 !
RAEPC:PROP=TBFULLIMIT-2; ! NUMBER OF TBF PER PDCH IS 2 IN UPLINK
DIRECTION !
! BEFORE NEW ON DEMAND PDCH IS ALLOCATED !
RAEPC:PROP=TBFDLLIMIT-2; ! NUMBER OF TBF PER PDCH IS 2 IN DOWNLINK
DIRECTION !
! BEFORE NEW ON DEMAND PDCH IS ALLOCATED !
RAEPC:PROP=PILTIMER-20; ! PACKET IDLE LIST TIMER IS 20 SECONDS USED
WITH ON !
! DEMAND PDCH !
RAEPC:PROP=ONDEMANDGPHDEV-20; ! NUMBER OF RESERVED RTGPHDV'S IN AN RPP USED
FOR ON!
! DEMAND PDCH ONLY !
RAEPC:PROP=ALPHA-6; ! POWER CONTROL PARAMETER IS SET TO RECOMMENDED
!
RAEPC:PROP=GPRSPRIO-0; ! WITH GPRSPRIO=0, CS GoS, HR, CLS etc. ARE NOT
AFFECTED BY GPRS !

! BSC1 GPRS CELL PARAMETERS;

! FPDCH = 0; ! NUMBER OF FIXED PACKET DATA CHANNELS OR DEDICATED
TS'S !
! GAMMA = XX; ! POWER REGULATION PARAMETER FOR MS IN DB !
! PDCHALLOC = NOPREF; ! NO PREFERENCE FOR FPDCH ALLOCATION !

===================================================================================
========
CHECK IMMEDIATE REPORT IN IOG
-----------------------------------------------------------------------------------
--------
IMLCT:SPG=0;
SDRRP:RPTID=ALL;
SDTDP:RPTID=101,OBJTYPE=CLTCHDRF,OBJ=YEH001A,INT=24; !DROPPED CONNECTION ON TCH!
SDTDP:RPTID=102,OBJTYPE=CELLCCHDR,OBJ=YEH001A,INT=24; !DROPPED CONNECTION ON SDCCH!
SDTDP:RPTID=103,OBJTYPE=CLTCH,OBJ=YEH001A,INT=24; !CELL ACTIVITY ON TCH 1!
SDTDP:RPTID=104,OBJTYPE=CELTCHF,OBJ=YEH001A,INT=24; !CELL ACTIVITY ON TCH 2!
SDTDP:RPTID=105,OBJTYPE=CLSDCCH,OBJ=YEH001A,INT=24; !CELL ACTIVITY ON SDCCH!
SDTDP:RPTID=106,OBJTYPE=NCELLREL,OBJ=YEH001A,INT=24; !INTERNAL CELL HANDOVER
RESULT!
SDTDP:RPTID=107,OBJTYPE=NECELLREL,OBJ=YEH001A,INT=24; !EXTERNAL CELL HANDOVER
RESULT!
SDTDP:RPTID=108,OBJTYPE=NICELHO,OBJ=YEH001A,INT=24; !INTERNAL CELL HANDOVER
ATTEMPT!
SDTDP:RPTID=109,OBJTYPE=NECELHO,OBJ=YEH001A,INT=24; !EXTERNAL CELL HANDOVER
ATTEMPT!
SDTDP:RPTID=110,OBJTYPE=NICELASS,OBJ=YEH001A,INT=24; !INT.CELL HO DURING
ASSIGNMENT!
SDTDP:RPTID=111,OBJTYPE=NECELASS,OBJ=YEH001A,INT=24; !EXT.CELL HO DURING
ASSIGNMENT!
SDTDP:RPTID=112,OBJTYPE=xxxxxxxx,OBJ=YEH001A,INT=24;
SDTDP:RPTID=113,OBJTYPE=CLTCH,OBJ=YEH001A,INT=24;CELL !TRAFFIC CHANNEL 1!
SDTDP:RPTID=114,OBJTYPE=CELTCHF,OBJ=YEH001A,INT=24; !CELL TRAFFIC CHANNEL 2!
SDTDP:RPTID=115,OBJTYPE=CLTCHDRF,OBJ=YEH001A,INT=24; !CELL TRAFFIC CHANNEL DROP!
SDTDP:RPTID=116,OBJTYPE=NCELLREL,OBJ=YEH001A,INT=24; !INTERNAL NEIGHBOUR CELL!
SDTDP:RPTID=117,OBJTYPE=NECELLREL,OBJ=YEH001A,INT=24; !EXTERNAL NEIGHBOUR CELL!
SDTDP:RPTID=118,OBJTYPE=NICELHO,OBJ=YEH001A,INT=24; !INTERNAL NEIGHBOUR CELL EXT!
SDTDP:RPTID=119,OBJTYPE=NICELASS,OBJ=YEH001A,INT=24; !HO ASSIGNMENT TO OTHER -
INTERNAL!
SDTDP:RPTID=120,OBJTYPE=NECELHO,OBJ=YEH001A,INT=24; !EXTERNAL NEIGHBOUR CELL
EXT !
SDTDP:RPTID=121,OBJTYPE=NECELASS,OBJ=YEH001A,INT=24; !HO ASSIGNMENT TO OTHER -
EXTERNAL!
END;

===================================================================================
========
CHECK REPORT IN APG
-----------------------------------------------------------------------------------
--------

<APLOC;
stmrp -L !List ALL reports in a short format!
stmrp -L -l !List ALL reports in a long format!
stmfo !Statistics and Traffic Measurement, File Output!

===================================================================================
========
RIR RECORDING
-----------------------------------------------------------------------------------
--------

RARDP:RID=RIRID00;
RARRP:RID=RIRID00;
RARIE:RID=RIRID00;
RARII;
RARDC:RID=RIRID00,CELL=ALL,CSYSTYPE=GSM1800;
RARDC:RID=RIRID00,ARFCN=574&&610&687&&710&786&&834;
RARDP:RID=RIRID00;
RARCI:RID=RIRID00;
RARRI:RID=RIRID00,DTIME=240,RESET;
RARRP:RID=RIRID00;
RARTI:RID=RIRID00,PERCVAL=900;
INMCT:SPG=0;
INFIP:FILE=RIRFIL00;
INFIP:FILE=RIRFIL00-000X;
END;
INFTI:FILE=RIRFIL00-000X,DEST=TMOS;

===================================================================================
========
MRR RECORDING
-----------------------------------------------------------------------------------
--------

RAMRP:RID=MRRID00; !CHECK STATUS OF RECORDING!

RAMIE:RID=MRRID00; !END MEASUREMENT! !DANGEROUS!
RAMII;
RAMDC:RID=MRRID00,CELL=YEH001A&YEH001B&YEH001C;
RAMDC:RID=MRRID00,CELL=YEH001A&YEH001B&YEH001C, REM; !remove cell!

RAMDC:RID=MRRID00,MEASTYPE=NOTYPE;
RAMDP:RID=MRRID00;
RAMRI:RID=MRRID00,DTIME=60,RESET;
RAMRP:RID=MRRID00;

!TRANSFER RECORDINGS!

RAMTI:RID=MRRID00;
INMCT:SPG=0;
INFIP:FILE=MRRFIL00;
INFIP:FILE=MRRFIL00-0077;
END;
INFTI:FILE=MRRFIL00-0077,DEST=OSS;

!!special for APG!!

aploc;
cpfls -ls RIR
afpfti -c L:\FMS\data\CPF\EXCHVOLUME\MRRFIL00\000000000X MRR OSSDEST1
exit
cpfls -s -q RIR
hostname
dir
dir /s mktr*

===================================================================================
========
OBJECT TYPE PRINT CHECK
-----------------------------------------------------------------------------------
--------

!IOG!

IMLCT:SPG=0;SDFOP:RPTID=ALL;
SDDOP:OBJTYPE=XXXXX,AREA=OPER,LIST;END;
!APG!

aploc;
stmrp -l -L stmotls -l CELLCCHDR CELLCCHHO CELLCONF

* Object Type define template for MSC *

***************************************

C:\>stmrp -L -l
REPORTID IN-USE NAME OBJECT TYPES
2002 yes 1000 AUTHEN C7ADJSLP C7RTSET C7RTTOTAL C7SL1
C7SL2 C7SLSET MAPSIGIWRK SECHAND ODB
SHMSGSERV MTRAFTYPE MBASTRAFTY
2000 yes 1001 CHASSIGNT EOS HLRMAP HLRSUBS HNDOVER LOAS
LOCAREAST EQIDCON HLRSTAT BSCSTAT CELLSTAT
DIGPATH
2001 yes 1002 NBRMSCLST PAGING SUPPLSERV UPDLOCAT
NBRCELLST GIWUSTAT COPRVLRST CODERASGN SAE
VLR TRAFFDEST1
2003 yes 1003 SHAM SHIST SHSCF TRUNKROUTE PLMNSUB GPRSGS
SGSNSTAT NAMSUBS PDPDEF ROAMING LOSSROUTE
2005 yes 1004 HS7SL1
2004 yes CSRROUTE CSRROUTE

* Object Type define template for BSC *

***************************************

C:\>stmrp -L -l
REPORTID IN-USE NAME OBJECT TYPES
2006 yes 1000 ATERTRANS BSC BSCGPRS BSCGPRS2 BSCMSLOT
BSCQOS C7SL1 C7SL2 CCCHLOAD CELEVENTD
CELEVENTH CELEVENTI CELEVENTS CELEVENTSC
CELLCCHDR
2005 yes 1001 CELLCCHHO CELLCONF CELLDUALT CELLGPRS
CELLGPRS2 CELLGPRSO CELLHCS CELLHSCSD
CELLMSQ CELLPAG CELLPOS CELLQOSEG CELLQOSG
CELLQOSS CELLSQI
2003 yes 1002 CELTCHF CELTCHFP CELTCHH CLQOSSCON
CLQOSSCON2 CLRATECHG CLSDCCH CLSDCCHO
CLSMS CLTCH CLTCHDRAF CLTCHDRAH CLTCHDRF
CLTCHDRH CLTCHFV1
2002 yes 1003 CLTCHFV2 CLTCHFV3 CLTCHHV1 CLTCHHV2
CLTCHHV3 CP DELSTRTBF DIGPATH DOWNTIME
EMGPRS GRPSWITCH IDLEOTCHF IDLEOTCHH
IDLEUTCHF IDLEUTCHH
2001 yes 1004 LAPD LOADREG LOAS LOASMISC MOTG MOTS
NCELLREL NECELASS NECELHO NECELHOEX
NECELLREL NICELASS NICELHO NICELHOEX
PREEMP
2000 yes 1005 RANDOMACC RLINKBITR RNDACCEXT TRAFDLGPRS
TRAFFGPRS TRAFGPRS2 TRAFULGPRS TRAPCOM
TRAPEVENT TRASEVENT TRASUBPOOL

===================================================================================
========
DATA TRANSCRIPT FOR NEW SITE INTEGRATION
-----------------------------------------------------------------------------------
--------

RLDEI:CELL=YEH001A, CSYSTYPE=GSM900; ! CHECK CELL NAME !

RLDEC:CELL=YEH001A,CGI=420-03-1023-
YEH0011,BSIC=63,BCCHNO=29,AGBLK=1,MFRMS=6,BCCHTYPE=NCOMB,FNOFFSET=5,XRANGE=NO; !
CHECK CGI-BSIC-BCCHNO-FNOFFSET !
RLDSI:CELL=YEH001A;
RLDSI:CELL=YEH001B;
RLDSI:CELL=YEH001C;
RLDGI:CELL=YEH001A,CHGR=1,SCTYPE=UL,BAND=GSM900;
RLDGI:CELL=YEH001A,CHGR=2,SCTYPE=OL,BAND=GSM900;
RLDTC:CELL=YEH001A,SCTYPE=UL,TSC=3; ! CHECK TSC VALUE !
RLDTC:CELL=YEH001A,SCTYPE=OL,TSC=6; ! CHECK TSC VALUE !
RLOLC:CELL=YEH001A,LOL=105,LOLHYST=2,TAOL=0,TAOLHYST=0;
RLCFI:CELL=YEH001A,DCHNO=40&41&42&44&46&48&49&50, CHGR=1; ! CHECK CHGR !
RLCFI:CELL=YEH001A,DCHNO=39&43&45&47, CHGR=2; ! CHECK CHGR !
RLHPC:CELL=YEH001A,CHAP=1;
RLCCC:CELL=YEH001A,CHGR=0, SDCCH=1, CBCH=NO, TN=2;
RLCCC:CELL=YEH001A,CHGR=1, SDCCH=1, CBCH=NO, TN=2;
RLCCC:CELL=YEH001A,CHGR=2, SDCCH=0, CBCH=NO, TN=2;
RLCHC:CELL=YEH001A,CHGR=0, HOP=OFF;
RLCHC:CELL=YEH001A,CHGR=1, HOP=ON, HSN=6,MAIO=0&4; ! CHECK HOP-MAIO-HSN !
RLCHC:CELL=YEH001A,CHGR=2, HOP=ON, HSN=37,MAIO=0; ! CHECK HOP-MAIO-HSN !
RLCPC:cell=YEH001A,BSPWRB=47; ! CHECK 1800 AND RBS TYPE !
RLCPC:CELL=YEH001A,MSTXPWR=33,BSPWRT=47,sctype=ul; ! CHECK 1800 AND RBS TYPE !
RLCPC:CELL=YEH001A,MSTXPWR=33,BSPWRT=47,sctype=ol; ! CHECK 1800 AND RBS TYPE !
RLCXC:CELL=YEH001A, DTXD=OFF;
RLDRC:CELL=YEH001A,CMDR=144;
RLLHC:CELL=YEH001A, LAYER=8, LAYERTHR=80, LAYERHYST=2; !CHECK LAYER-
LAYERTHR-LAYERHYST!
RLLOC:CELL=YEH001A,BSPWR=44,BSTXPWR==120,BSRXSUFF=120,MSRXMIN=104,MSRXSUFF=0,SCHO=O
FF,MISSNM=3,AW=OFF,HYSTSEP=90,SCTYPE=ALL;
RLLUC:cell=YEH001A,TALIM=62, CELLQ=HIGH;
RLLUC:CELL=YEH001A, QLIMUL=55, QLIMDL=55, SCTYPE=UL ;
RLLUC:CELL=YEH001A, QLIMUL=60, QLIMDL=60, SCTYPE=OL ;
RLLPC:CELL=YEH001A,PTIMHF=5,PTIMBQ=5,PTIMTA=10,PSSHF=63,PSSBQ=5,PSSTA=63;
RLLFC:CELL=YEH001A,SSEVALSD=6,QEVALSD=6,SSEVALSI=6,QEVALSI=6,SSLENSD=10,QLENSD=10,S
SLENSI=4,QLENSI=4,SSRAMPSD=5,SSRAMPSI=1;
RLLDC:CELL=YEH001A, MAXTA=63, RLINKUP=16;
RLIHC:CELL=YEH001A,IHO=ON,MAXIHO=2,TMAXIHO=7,TIHO=10,QOFFSETULP=10,QOFFSETDLP=10,SS
OFFSETULN=10,SSOFFSETDLP=0,SCTYPE=ALL;
RLSSC:CELL=YEH001A,ACCMIN=102,CCHPWR=33,CRH=4,DTXU=1,NCCPERM=0&&7,
=16,MBCR=0,NECI=1;
RLCDC:CELL=YEH001A,MC=ON; !EGPRS/EDGE!
RLSBC:CELL=YEH001A,CB=NO,ACC=CLEAR,MAXRET=4,TX=50,ATT=YES,T3212=40,CBQ=HIGH,CRO=0,T
O=0,PT=0,ECSC=YES;
RLSBC:CELL=YEH001B,CB=NO,ACC=CLEAR,MAXRET=4,TX=50,ATT=YES,T3212=40,CBQ=HIGH,CRO=0,T
O=0,PT=0,ECSC=YES;
RLSBC:CELL=YEH001C,CB=NO,ACC=CLEAR,MAXRET=4,TX=50,ATT=YES,T3212=40,CBQ=HIGH,CRO=0,T
O=0,PT=0,ECSC=YES;
RLPCI:CELL=YEH001A;
RLPCC:CELL=YEH001A,SCTYPe=ALL, DTXFUL=5, SSDESUL=90, SSLENUL=3 ,QLENUL=3,
LCOMPUL=5, QCOMPUL=57, QDESUL=30, REGINTUL=1;
RLBCI:CELL=YEH001A;
RLBCC:CELL=YEH001A,SDCCHREG=OFF,SSDESDL=90,SSLENDL=3,LCOMPDL=5,QCOMPDL=65,QLENDL=3,
REGINTDL=1,BSPWRMINN=20,QDESDL=30,SCTYPE=ALL;
RLPRC:CELL=YEH001A, CHTYPE=TCH, PP=DEFAULT,SCTYPE=UL;
RLPRC:CELL=YEH001A, CHTYPE=SDCCH, PP=DEFAULT,SCTYPE=UL;
RLPRC:CELL=YEH001A, CHTYPE=TCH, PP=DEFAULT,SCTYPE=OL;
RLPRC:CELL=YEH001A, CHTYPE=SDCCH, PP=DEFAULT,SCTYPE=OL;
RLSLC:CELL=YEH001A, LVA=21, ACL=A3, CHTYPE=TCH,SCTYPE=UL; !
CHECK NUMBER OF LVA FOR UL-OL AND NUMBER TRU'S !
RLSLC:CELL=YEH001A, LVA=16, ACL=A2, CHTYPE=SDCCH,SCTYPE=UL; !
CHECK NUMBER OF LVA FOR UL-OL AND NUMBER TRU'S !
RLSLC:CELL=YEH001A, LVA=1, ACL=A2, CHTYPE=BCCH,SCTYPE=UL; !
CHECK NUMBER OF LVA FOR UL-OL AND NUMBER TRU'S !
RLSLC:CELL=YEH001A, LVA=0, ACL=A2, CHTYPE=CBCH,SCTYPE=UL; !
CHECK NUMBER OF LVA FOR UL-OL AND NUMBER TRU'S !
RLSLC:CELL=YEH001A, LVA=8, ACL=A2, CHTYPE=TCH,SCTYPE=OL; !
CHECK NUMBER OF LVA FOR UL-OL AND NUMBER TRU'S !
RLIMI:CELL=YEH001A;
RLIMC:CELL=YEH001A,INTAVE=6,LIMIT1=2,LIMIT2=6,LIMIT3=12,LIMIT4=22;
RLLLC:CELL=YEH001A,SCLD=ON,SCLDLL=20,SCLDUL=30;
RLLCI:CELL=YEH001A;
RLLCC:CELL=YEH001A,CLSLEVEL=20,CLSACC=40,HOCLSACC=ON,RHYST=100,CLSRAMP=8;
RLACC:CELL=YEH001A, STIME=20, SLEVEL=0;
!RLHBC:HCSBANDHYST=2;
!RLHBC:HCSBANDTHR=95,HCSBAND=2,LAYER=2;

!
RLLBC:SYSTYPE=GSM900,EVALTYPE=3,TINIT=5,TALLOC=2,TURGEN=2,TAAVELEN=4,IBHOSICH=ON,IH
OSICH=OFF,ASSOC=OFF,IBHOASS=ON,tho=30,nho=3;
!RLOMC:MODE=multi;
!RLTYC:GSYSTYPE=mixed;
!RLDCI:EMERGPRL=1;
!RLSCI:STATSINT=4;

!SYPAC:ACCESS=ENABLED,PSW=PSW2PAR;
!DBTRI;
!DBTSP:TAB=AXEPARS,SETNAME=CME20BSCF,NAME=GPRSQOS;
!DBTSC:TAB=AXEPARS,SETNAME=CME20BSCF,NAME=GPRSQOS,VALUE=1;
!DBTRE:COM;
!SYPAC:ACCESS=DISABLED;
RLPSC:CELL=YEH001A,PLAYER=MAPPED,PHCSTHR=MAPPED;
!RLGQC:CELL=YEH001A,STREAMSUP=YES,BPDCHBR=12,GPDCHBR=14,EPDCHBR=20; !
FUNCTIONALITY NOT SUPPORTED BY THIS EXCHANGE!
RLGSC:CELL=YEH001A,FPDCH=4,GAMMA=24,CHCSDL=CS2,LA=ON,PSKONBCCH=DISABLED,PDCHALLOC=L
AST,SCALLOC=UL;

RLBDC:CELL=YEH001A,NUMREQBPC=8,NUMREQEGPRSBPC=0,NUMREQCS3CS4BPC=0,CHGR=0,TN7BCCH=GP
RS; !CHECK NUMREQBPC&GPRSBPC&CS3CS4BPC!

RLBDC:CELL=YEH001A,NUMREQBPC=16,NUMREQEGPRSBPC=2,NUMREQCS3CS4BPC=2,CHGR=1; !
CHECK NUMREQBPC!
RLBDC:CELL=YEH001A,NUMREQBPC=8,NUMREQEGPRSBPC=0,NUMREQCS3CS4BPC=0,CHGR=2;
RLMFC:CELL=YEH001A,MBCCHNO=25&26&27&28&29&30&31&32&33&34&35&36&37&38,
LISTTYPE=IDLE; ! CHECK MBCCHNO !
RLMFC:CELL=YEH001A,MBCCHNO=25&26&32&35&37, LISTTYPE=ACTIVE; ! CHECK MBCCHNO !
RLNRI:CELL=YEH001A, CELLR=YEH001B; ! CHECK CELLR !

RLNRI:CELL=YEH001A, CELLR=YEH002B,SINGLE; ! CHECK CELLR !

RLNRC:CELL=YEH001A,CELLR=YEH001B,CS=YES,CAND=BOTH,HIHYST=3,LOHYST=3,AWOFFSET=3,BQOF
FSET=3; ! CHECK CS IF CO-SITE OR EXTERNAL NEIGHBOUR !

RXMOI:MO=RXOTG-1, TRACO=POOL, COMB=HYB, RSITE=YEH001_KOLYUTH, SWVER=B4401R006K;

RXMOC:MO=RXOTG-1, FHOP=SY, SIGDEL=NORMAL, CONFMD=FASTREC, CONFACT=2;
RXMOI:MO=RXOCF-1, TEI=62, SIG=CONC;
RXMOI:MO=RXODP-1-0, DEV=RXODPI-1;

RXMOI:MO=RXOCON-1, DCP=64&&87;
RXMOI:MO=RXOIS-1;
RXMOI:MO=RXOTF-1, TFMODE=SA,SYNCSRC=DEFAULT;

RXMOI:MO=RXOTRX-1-0, TEI=0, DCP1=178, DCP2=179&&186, SIG=CONC;

RXMOI:MO=RXOTRX-1-1, TEI=1, DCP1=187, DCP2=188&&195, SIG=CONC;
RXMOI:MO=RXOTRX-1-2, TEI=2, DCP1=196, DCP2=197&&204, SIG=CONC;
RXMOI:MO=RXOTRX-1-3, TEI=3, DCP1=205, DCP2=206&&213, SIG=CONC;
RXMOI:MO=RXOTRX-1-4 ,TEI=4 ,DCP1=214, DCP2=215&&222, SIG=CONC;
RXMOI:MO=RXOTRX-1-5 ,TEI=5 ,DCP1=223, DCP2=224&&231, SIG=CONC;
RXMOI:MO=RXOTRX-1-6, TEI=6, DCP1=232, DCP2=233&&240, SIG=CONC;
RXMOI:MO=RXOTRX-1-7, TEI=7, DCP1=241, DCP2=242&&249, SIG=CONC;
RXMOI:MO=RXOTRX-1-8, TEI=8, DCP1=250, DCP2=251&&258, SIG=CONC;
RXMOI:MO=RXOTRX-1-9, TEI=9, DCP1=259, DCP2=260&&267, SIG=CONC;
RXMOI:MO=RXOTRX-1-10 ,TEI=10 ,DCP1=268, DCP2=269&&276, SIG=CONC;
RXMOI:MO=RXOTRX-1-11 ,TEI=11 ,DCP1=277, DCP2=278&&285, SIG=CONC;
RXMOC:MO=RXOTRX-1-0, CELL=YEH001A,CHGR=0;
RXMOI:MO=RXOTX-1-0&&-3, BAND=GSM900, MPWR=47;
RXMOC:MO=RXOTX-1-0&&-3,CELL=YEH001A;
RXMOI:MO=RXORX-1-0&&-11, BAND=GSM900, RXD=AB,ANTA=ANTA,ANTB=ANTB;
RXMOI:MO=RXOTS-1-0-0&&-7;
RXTCI:MO=RXOTG-1, CELL=YEH001A, CHGR=0;
RXAPI:MO=RXOTG-1, DEV=RBLT2-33&&-63 , DCP=1&&31;
RXAPI:MO=RXOTG-1, DEV=RBLT2-65&&-95 , DCP=33&&63,RES64K; ! for EDGE 64 kbps
Connection !
EXDAI:DEV=RBLT2-33&&-63;
BLODE:DEV=RBLT2-33&&-63;
DTDII:DIP=1ODP0,DEV=RXODPI-1;
DTBLE:DIP=1ODP0;
RXESI:MO=RXOTG-1,SUBORD;
RXBLE:MO=RXOTG-1,SUBORD;
RLSTC:CELL=YEH001A, STATE=ACTIVE;
RLSTP:CELL=YEH001A;
RLSLI:CELL=YEH001A,SCTYPE=UL;
RLSMC:CELL=YEH001A, SIMSG=1, MSGDIST=ON;
RRGBP; ! CHECK GPRS STATUS !
RLGSI:CELL=YEH001A;

! DEFINE INTERNAL CELL IN MSC !

!MGCEP:CELL=ALL;!
!MGBSP:BSC=ALL;!
MGCEI:CELL=YEH001A,CGI=420-03-1023-YEH0011,BSC=BATAM; ! CHECK CGI-BSC NAME-
CO-RO !

! DEFINE EXTERNAL CELL ON MSC !

!MGOCP:CELL=ALL;
MGOCI:CELL=1088B,CGI=420-03-1011-10882,MSC=BATAM;

RLNRI:CELL=DU1136F,CELLR=DU1268A,SINGLE; !Define external relation!

RLMFC:CELL=DU1136F,MBCCHNO=53,MRNIC;
rlstc:cell=DU1107G,state=HALTED;
rlstc:cell=DU1107F,state=HALTED;
rlstc:cell=DU1107E,state=HALTED;
rlstc:cell=BL2519G,state=HALTED;
rlstc:cell=BL2519F,state=HALTED;
rlstc:cell=BL2519E,state=HALTED;
rlstc:cell=DU1331F,state=HALTED;
rlstc:cell=DU1331E,state=HALTED;

!Proses penambahan SDCCH!

!Cek konfigurasi alokasi SDCCH!
rlcfp:cell=pp3807a;
rlccc:cell=pp3807c,chgr=1,sdcch=2; !menambah SD pada channel group 1 menjadi 2!
!Supervisi!
rlslp:cell=pp3807a; !Konfigurasi Supervisi yang ada!
rlsle:cell=pp3807a; !Me-non active kan supervisi alarm!
rlslc:cell=pp3807c,CHTYPE=SDCCH,LVA=23; !mensetting Supervisi sesuai dengan NCH
yang ada!
rlslc:cell=pp3807c,CHTYPE=TCH,CHRATE=FR,SPV=1,LVA=12; !mensetting Supervisi sesuai
dengan NCH yang ada!
rlsli:cell=pp3807a; !Meng-active kan supervisi alarm!

!Loop Test!
RXMSP:MO=RXOTS-57-9-4;
RXBLI:MO=RXOTS-57-9-4,force;
RXESE:MO=RXOTS-57-9-4;
RXESI:MO=RXOTS-57-9-4; !wait!
rxlti:mo=RXOTS-57-9-4; !Loop Test!
RXBLE:MO=RXOTS-57-9-4;

!Cek C7 di BSC!
c7ltp:ls=all; !Cek status C7 di BSC!

RXBLe:MO=RXOTS-84-5-7;

rxbli:mo=rxots-84-11-1&-4&-6,force;

!cek no TG dari dev!

rxmdp:moty=rxotrx,dev=rblt2-554;
rxmdp:moty=rxots,dev=rblt2-554;

!cek device transmisi!

ntcop:snt=all;

!cek TRH threshold!

rahlp;
rahep;
rahdp;

!timeslot!
rxtei:mo=rxots-xx-x-x

!cek BSC APG!

cdhls -l
cdhls -ls
afpls -l
afpls -ls
!Cek Dynamic SDCCH!
rlacp:cell=....;

==========================================================================

reset TRX

RXTCP:MOTY=RXOTG,CELL=JS06821;

rxbli:mo=rxotrx-5-0,subord,force;
rxese:mo=rxotg-194,subord;
rxesi:mo=rxotg-194,subord;
rxble:mo=rxotg-194,subord;

Satu TG (semua TRX)

=======

RXTCP:MOTY=RXOTG,CELL=JU02213;
RLCRP:CELL=JU02213;
rxcdp:mo=rxotg-49;
rxasp:mo=rxotg-49;
rxmfp:mo=rxotg-59,faulty,subord;

Satu TG (semua TRX)

=======================

======================

RLSTC:cell=24611,STATE=HALTED;
RXBLI:MO=rxotx-86-0,Subord,Force;
RXBLI:MO=rxotrx-156-9,Subord,Force;
RXESE:MO=rxotrx-156-8,Subord;
RXESE:MO=rxotrx-156-9,Subord;
RXESI:MO=rxotrx-156-8,Subord;
RXESI:MO=rxotrx-156-9,Subord;
RXBLE:MO=rxotrx-156-8,Subord;
RXBLE:MO=rxotrx-156-9,Subord;
RLSTC:cell=JT08751,STATE=ACTIVE;

RLSSC:CELL=BG62501,RLINKT=32;

rxmop:mo=rxotx-48-0&&-11;

rlnri:cell=BG05902,cellr=BG05863;

RABRP:RID=all;
RABIE:RID=BARID01;
RABII;
RABII;
RABDC:RID=BARID01,CELL=ALL,CSYSTYPE=GSM900, NCELLTYPE=BOTH;
RABDC:RID=BARID01,TMBCCHNO=1&&49&547&&573&712&&785,RELSSP=3,RELSS2N=3,ABSS=75;
RABDP:RID=BARID01;
RABRI:RID=BARID01,DTIME=180,MRNIC;
RABRP:RID=BARID01;

RABTI:RID=BARID01,IO=FILE;

RABRE:RID=BARID01; (

==========================================================================
route add -p 10.0.0.0 mask 255.0.0.0 10.23.39.198

RXBLI:MO=RXOTG-459,SUBORD,FORCE;
RXESE:MO=RXOTG-459,SUBORD;
RXESI:MO=RXOTG-459,SUBORD;
RXBLE:MO=RXOTG-459,SUBORD;

RLSTC:CELL=JK12504,STATE=HALTED;
rxbli:mo=rxotrx-463-2,subord,force;
rxese:mo=rxotrx-463-2,subord;
rxbli:mo=rxotrx-464-1,subord,force;
rxese:mo=rxotrx-463-1,subord;
rxesi:mo=rxotrx-463-2,subord;
rxble:mo=rxotrx-463-2,subord;
rxesi:mo=rxotrx-464-1,subord;
rxble:mo=rxotrx-464-1,subord;
RLSTC:CELL=JK12504,STATE=ACTIVE;

RLSTC:CELL=24611,STATE=HALTED;
RLSTC:CELL=24612,STATE=HALTED;
RLSTC:CELL=30859,STATE=HALTED;
rxbli:mo=rxotg-33,force,subord;
rxese:mo=rxotg-33,subord;
rxbli:mo=rxotg-34,force,subord;
rxese:mo=rxotg-34,subord;
rxbli:mo=rxotg-35,force,subord;
rxese:mo=rxotg-35,subord;
rxesi:mo=rxotg-33,subord;
rxble:mo=rxotg-33,subord;
rxesi:mo=rxotg-34,subord;
rxble:mo=rxotg-34,subord;
rxesi:mo=rxotg-35,subord;
rxble:mo=rxotg-35,subord;
RLSTC:CELL=30857,STATE=ACTIVE;
RLSTC:CELL=30858,STATE=ACTIVE;
RLSTC:CELL=30859,STATE=ACTIVE;

RRSGP:SCGR=ALL;

CR H2 !!
RLSSC:CELL=22243,ACCMIN=100;
RLSSC:CELL=22241,ACCMIN=100;

RLSTC:CELL=24611,STATE=HALTED;
rxbli:mo=rxotg-135,force,subord;
rxese:mo=rxotg-135,subord;
rxesi:mo=rxotg-135,subord;
rxble:mo=rxotg-135,subord;
RLSTC:CELL=24611,STATE=ACTIVE;

! SWAP LOGICAL !
! fill the parameters !
@SET {CELL1}=12345
@SET {CELL2}=12345
@SET {_CHGR}=3
@SET {_TG}=124
@SET {_RXOTG}=RXOTG-{_TG}
@SET {_TRX1}=8
@SET {_TRX2}=9
@SET {_TRX3}=10
@SET {_TRX4}=11
@SET {_TRX5}=4
@SET {_TRX6}=5
@SET {_TRX7}=6
@SET {_TRX8}=7
! end of fill the parameters !

@SET {_RXOTRX_A_1}=RXOTRX-{_TG}-{_TRX1}
@SET {_RXOTRX_A_2}=RXOTRX-{_TG}-{_TRX2}
@SET {_RXOTRX_A_3}=RXOTRX-{_TG}-{_TRX3}
@SET {_RXOTRX_A_4}=RXOTRX-{_TG}-{_TRX4}
@SET {_RXOTRX_B_1}=RXOTRX-{_TG}-{_TRX5}
@SET {_RXOTRX_B_2}=RXOTRX-{_TG}-{_TRX6}
@SET {_RXOTRX_B_3}=RXOTRX-{_TG}-{_TRX7}
@SET {_RXOTRX_B_4}=RXOTRX-{_TG}-{_TRX8}

@SET {_RXOTX_A_1}=RXOTX-{_TG}-{_TRX1}
@SET {_RXOTX_A_2}=RXOTX-{_TG}-{_TRX2}
@SET {_RXOTX_A_3}=RXOTX-{_TG}-{_TRX3}
@SET {_RXOTX_A_4}=RXOTX-{_TG}-{_TRX4}
@SET {_RXOTX_B_1}=RXOTX-{_TG}-{_TRX5}
@SET {_RXOTX_B_2}=RXOTX-{_TG}-{_TRX6}
@SET {_RXOTX_B_3}=RXOTX-{_TG}-{_TRX7}
@SET {_RXOTX_B_4}=RXOTX-{_TG}-{_TRX8}

RLSTC:cell={CELL2},CHGR={_CHGR},STATE=HALTED;
RLSTC:cell={CELL1},CHGR={_CHGR},STATE=HALTED;
RXBLI:MO={_RXOTG},SUBORD,FORCE;
RXESE:MO={_RXOTG},SUBORD;

RXMOC:MO={_RXOTRX_A_1},CELL={CELL1};
RXMOC:MO={_RXOTRX_A_2},CELL={CELL1};
RXMOC:MO={_RXOTRX_A_3},CELL={CELL1};
RXMOC:MO={_RXOTRX_A_4},CELL={CELL1};
RXMOC:MO={_RXOTRX_B_1},CELL={CELL2};
RXMOC:MO={_RXOTRX_B_2},CELL={CELL2};
RXMOC:MO={_RXOTRX_B_3},CELL={CELL2};
RXMOC:MO={_RXOTRX_B_4},CELL={CELL2};

RXMOC:MO={_RXOTX_A_1},CELL={CELL1};
RXMOC:MO={_RXOTX_A_2},CELL={CELL1};
RXMOC:MO={_RXOTX_A_3},CELL={CELL1};
RXMOC:MO={_RXOTX_A_4},CELL={CELL1};
RXMOC:MO={_RXOTX_B_1},CELL={CELL2};
RXMOC:MO={_RXOTX_B_2},CELL={CELL2};
RXMOC:MO={_RXOTX_B_3},CELL={CELL2};
RXMOC:MO={_RXOTX_B_4},CELL={CELL2};

RXESI:MO={_RXOTG},SUBORD;
RXBLE:MO={_RXOTG},SUBORD;
RLSTC:cell={CELL2},CHGR={_CHGR},STATE=ACTIVE;
RLSTC:cell={CELL1},CHGR={_CHGR},STATE=ACTIVE;
!reset tg
@SET {SITE_ID}=JK1250
@SET {_RXOTG1}=RXOTG-463
@SET {_RXOTG2}=RXOTG-464
@SET {_RXOTG3}=RXOTG-466

RXCDP:MO={_RXOTG1};
RXCDP:MO={_RXOTG2};
RXCDP:MO={_RXOTG3};
RLSTC:CELL={SITE_ID}1,STATE=HALTED;
RLSTC:CELL={SITE_ID}2,STATE=HALTED;
RLSTC:CELL={SITE_ID}3,STATE=HALTED;
rxbli:mo={_RXOTG1},subord,force;
rxese:mo={_RXOTG1},subord;
rxesi:mo={_RXOTG1},subord;
rxble:mo={_RXOTG1},subord;
rxbli:mo={_RXOTG2},subord,force;
rxese:mo={_RXOTG2},subord;
rxesi:mo={_RXOTG2},subord;
rxble:mo={_RXOTG2},subord;
rxbli:mo={_RXOTG3},subord,force;
rxese:mo={_RXOTG3},subord;
rxesi:mo={_RXOTG3},subord;
rxble:mo={_RXOTG3},subord;
RLSTC:CELL={SITE_ID}1,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}2,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}3,STATE=ACTIVE;

!reset tg
@SET {SITE_ID}=1213
@SET {_RXOTG1}=RXOTG-167

RXCDP:MO={_RXOTG1};
RLSTC:CELL={SITE_ID}4,STATE=HALTED;
RLSTC:CELL={SITE_ID}5,STATE=HALTED;
RLSTC:CELL={SITE_ID}6,STATE=HALTED;
rxbli:mo={_RXOTG1},subord,force;
rxese:mo={_RXOTG1},subord;
rxesi:mo={_RXOTG1},subord;
rxble:mo={_RXOTG1},subord;
RLSTC:CELL={SITE_ID}4,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}5,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}6,STATE=ACTIVE;

RLSTC:CELL=31693,CHGR=2,STATE=ACTIVE;
RLSTC:CELL=31693,CHGR=3,STATE=ACTIVE;
RLSTC:CELL=31692,CHGR=2,STATE=ACTIVE;
RLSTC:CELL=31692,CHGR=3,STATE=ACTIVE;
RLSTC:CELL=31691,CHGR=2,STATE=ACTIVE;
RLSTC:CELL=31691,CHGR=3,STATE=ACTIVE;

!Reset TG 2
@SET {SITE_ID}=JK1250
@SET {_RXOTG1}=RXOTG-463
@SET {_RXOTG2}=RXOTG-464

RXCDP:MO={_RXOTG1};
RXCDP:MO={_RXOTG2};
RLSTC:CELL={SITE_ID}4,STATE=HALTED;
RLSTC:CELL={SITE_ID}5,STATE=HALTED;
RLSTC:CELL={SITE_ID}6,STATE=HALTED;
rxbli:mo={_RXOTG1},subord,force;
rxese:mo={_RXOTG1},subord;
rxesi:mo={_RXOTG1},subord;
rxble:mo={_RXOTG1},subord;
rxbli:mo={_RXOTG2},subord,force;
rxese:mo={_RXOTG2},subord;
rxesi:mo={_RXOTG2},subord;
rxble:mo={_RXOTG2},subord;
RLSTC:CELL={SITE_ID}4,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}5,STATE=ACTIVE;
RLSTC:CELL={SITE_ID}6,STATE=ACTIVE;

emarosd
23novemb
eidhdian
nov18hdian

eaw BCRB1
RXMOP:MOTY=RXOTG;
quit;
eaw BCRB3
RXMOP:MOTY=RXOTG;
quit;
eaw BJTB2
RXMOP:MOTY=RXOTG;
quit;

eaw BCRB1
caclp;
RXMFP:MOTY=RXERX,faulty;
RXMFP:MOTY=RXETRX,faulty;
RXMFP:MOTY=RXETS,faulty;
RXMFP:MOTY=RXETX,faulty;
RXMFP:MOTY=RXOCF,faulty;
RXMFP:MOTY=RXOCON,faulty;
RXMFP:MOTY=RXORX,faulty;
RXMFP:MOTY=RXOTF,faulty;
RXMFP:MOTY=RXOTRX,faulty;
RXMFP:MOTY=RXOTS,faulty;
RXMFP:MOTY=RXOTX,faulty;
quit;