The CS/JS Std/Crane Series is a series of luminaires designed to operate in highly rugged

environment such as container handling cranes,highmast lighting, hazardous and combustible areas.
Its armored outfit with ADC12 Aluminum housing, the model fully protects the electronics within,
dividing the external environment from its internal cavity. This ensures the longevity of the LED light
sources and its components to operate reliably without the influences of the environment. With this
new addition in the prismatic luminaire series, users now have better illumination.

CS Series 50 CS Series 100

Features
Energy Savings
- Uncommonly high energy savings against conventional lighting up to
80% in 1:1 replacement ratio

Mechanical Built
- Powder coated die cast aluminium ADC12 body
- Electronic Driver in IP66 water safe casing.
- Built in breather to prevent any mist and dews forming.
- Light housing designed for 500-hour salt spray test.
- Light housing designed for wind tunnel test
- Light housing designed for 5G vibration shock test.
- Heavy duty bracket with adjustable angle and safety chain to light body, JS Series 200 JS Series 800
ballast (optional). Ballast box detachment from body is optional.
- Extra safety wire for ring covers attached to main housing
- <IK08 special lens design

Performance
- Extra low glare and light pollution

Electrical Safety
- Universal AC input (up to 305VAC)
- Full range protection: Short-circuit / Overcurrent / Over temperature for
LED Driver
- Built in active Power Factor Correction (PFC).
- Meet 4KV Surge immunity level (IEC61000-4-5)
- Special SPD 10KA/20KA can be added.
- Lead free soldering on PCB
- Primary cable for AGL
- Flame retardant V0 - V2 rubber seal

Block 4012 Ang Mo Kio Ave 10 #06-01B TECH PLACE 1

Note: Information are accurate at Sep ‘18 publishing . SINGAPORE 569628
*BIS Certification in progress
 Technical Data
Color Rendering (CRI) - Special application can be customized to
Main (input) voltage *90 ~ 305 VAC (50/60Hz)
higher CRI
*based on Meanwell HLG Series
Total Weight
Color Temperature (CCT) - 2700K - 7000K can be customized
CS Series 50 C 1 kg – 1.3 kg
however the lumen/Watt will varies
CS Series 100 6.5kg – 8.8 kg
JS Series 200 Std 14 kg – 16.7 kg Lumen/Watt as per CREE / LUMILEDS Specifications
JS Series 200 Crane 21 kg – 23.7 kg
JS Series 800 21 kg – 30.5 kg Drivers - Standards will be Meanwell, others like Philips, Sozen
Heat Tolerance -40°C till 50°C Inventronics etc can be incorporated
Protection Class IP66, Class I
Color Temperature 2700K-7000K Max Ambient Temperature is applicable up to CS Series 50
Color Rendering RA70-90 50W, CS Series 100 185W, JS Series 200 420W, JS Series 800
Lumen Efficiency Approx. 120 – 159 lm/watt 640W. (For ambient temperature out of specified range,
Light Source Life Span 50,000 – 100,000 hrs (Depends performance shall be adjusted accordingly.)
on ambient and operating wattages)
Lamp Type LED Power – Other power ranges not specified can be customized
CS Series 50 25W/35W/50W
# Extended Warranty is subjected to evaluation and design
CS Series 100 80W/100W/120W/150W/185W
considerations.
JS Series 200 185W/240W/320W/370W/420W
JS Series 800 480W/550W/600W/640W * Marine Grade Sub-components of SS304 already in used.
Operating position Universal However high SS316 brackets/cable glands, safety chain, etc, can
Energy Consumption be incorporated upon customer request
CS Series 50 27.5W/38.5W/55W
CS Series 100 87.9W/107W/129W/161W/197W IP67/IP68 is available upon request
JS Series 200 197W/258W/338W/400W/438W
JS Series 800 518W/575W/627W/668W
Start Time Instant
Driver Internal with casing or External IP67
Available Optics D110 – SNW D203 – SNN
D203 – SNM D203 – SMW
D203 – SNW D320 – SNM
D320 – SMW D320 – SNW
Option Available Primary connector model CEG-
52, Secondary Connector kits (Model
90P, 90P or 91R ), Safety Chain, Black or
Grey available
General Warranty #5 years

Components Standards & Compliance

Body Certifications • Body certified to Directive 94/9/EC. EC-type Certificate Number IEP 14 ATEX 0219
• Essential and safety requirements compliance standards: EN60079-0/2009: EN60079-7/2007;EN60079-
18/2009;EN60079-31/2009

CREE LED • Reflow solderable–JEDECJ-STD-020C

• Electriacallyneutral thermal path
• RoHS and REACh-compliant
• UL® recognized component(E349212)
Cree now uses standardized IES LM-80-08 and TM-21-11 for Lumen Maintenance
RoHS Compliance Directive 2011/65/EC (RoHS2)
UL ®Recognized Component
Level 4 enclosure consideration, The LED package or a portion thereof has been investigated as a fire and electrical
enclosure per ANSI/UL 8750

LumiLED RoHs 2011/65/EU, REACH Regulation (EC) 1907/2006, ANSI

MEANWELL Driver Safety - UL8750, TUV EN6137-1, ENG61347-2-13,PSE J61347-1, J61347-2-13 (except for HLG-240H-C-Type)
(Special HL LED Class 1 Div2 Compliance) approved; UL1012, UL60950-1, TUV EN60950-1 approved for HLG-240H only
EMC - EN55015, EN55022class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, En61547

PCB ES140915008CE SGS 2011/65/EU (RoHs)

Light Performance Lumen Measurement DIN 5032-1, 2, 4 and EN/3032-1

Note: Information are accurate at Sep ‘18 publishing . Block 4012 Ang Mo Kio Ave 10 #06-01B TECH PLACE 1
SINGAPORE 569628
 Applications
Aviation – Engine Testing Facilities, Painting Facilities.

Marine & OnG – Barge Engine rooms, Oil rigs, shipyards, LNG Tankers.

Maritime / Warehouse / Logistics Centre – dangerous goods storage area.

Other industries – Chemical Plants, Power Plants, Mills, Mining Quarries, etc.

Dimensions
CS Series 100

JS Series 200 std

JS Series 200 Crane

JS Series 800

Block 4012 Ang Mo Kio Ave 10 #06-01B TECH PLACE 1

Note: Information are accurate at Sep ‘18 publishing . SINGAPORE 569628
 Comparisons
PrisLed CDM Other Conventio PrisLed CDM Other Conventi
LED nal LED onal
Lighting Lighting
50W* 70W 55-60W 100-150W 150W 200W 185W- 400W
* Lens, lamp efficacy, reflectance ratio on 200W
ceiling/walls/floor /MF dependent. All LEDs we used 185W 220W 200W 550W
MF=1.0 unlike conventional lighting is MF0.8
* Lens, lamp efficacy, reflectance ratio on
ceiling/walls/floor /MF dependent. All LEDs we used
PrisLed CDM Other Conventi MF=1.0 unlike conventional lighting is MF0.8
LED onal
Lighting
PrisLed CDM Other Conventi
550W 650W 600W 1750W LED onal
600W 700W 650W 2500W Lighting

640W 750W 680W 3000W 370W 450W 400W- 1000W

420W
* Lens, lamp efficacy, reflectance ratio on
ceiling/walls/floor /MF dependent. All LEDs we used 420W 500W 475W- 1200W
MF=1.0 unlike conventional lighting is MF0.8 500W

* Lens, lamp efficacy, reflectance ratio on

ceiling/walls/floor /MF dependent. All LEDs we used
MF=1.0 unlike conventional lighting is MF0.8

Photometry D320
SNN SMW SNW

Photometry D203
SNN SNM SW SNW

Photometry D110
SNW

Block 4012 Ang Mo Kio Ave 10 #06-01B TECH PLACE 1

Note: Information are accurate at Sep 18 publishing . SINGAPORE 569628