Code Course Title L - T - P Credit
Code Course Title L - T - P Credit
1. Course Outcomes.
1.1. Understand the basics of electrical circuits with nodal and mesh
analysis.
1.2. Acquire knowledge about electrical network theorems.
1.3. Apply Laplace Transform for steady state and transient analysis.
1.4. Determine different network functions.
1.5. Analyze the frequency domain techniques.
2. Syllabus.
2.1. Introduction. Scope of network theory, classification of network
elements, linear and non-linear, active and passive, lumped and distributed
elements and their characteristics. Analysis of networks using graph theory
and its applications. Concept of incident, tie set, cut set matrices. Mesh and
nodal methods of analysis. Thevenin’s theorem, Norton's theorem,
Superposition theorem, Maximum power transfer theorem, Reciprocity
theorem and applications of various theorems.
3. Text Books.
Ser Title Author Publisher Edition Year
3.1. Circuits and Sudhakar, P. Tata 4th 2010
Networks: Shyam McGraw
Analysis and mohan Hill
Synthesis Education
3.2. Engineering William H John 7th 2010
Circuit analysis Hayt, Jack E Wiley &
Kemmerly, sons
Steven M
Durbin
3.3. Electric Circuits Joseph A Schaum’s 7th 2018
Edminister Outline
Series
3.4. Network Analysis ME Van Wiley 2nd 1964
Valkenburg
5. Reference Videos.
5.1. NPTEL videos for Circuit Theory -Prof. S.C. Dutta Roy Department of
Electrical Engineering Indian Institute of Technology, Delhi.
6. List of Experiments.
6.1. To determine frequency of given series resonant circuit and to plot
graph between frequency and current.
6.2. To plot variation in current with change in frequency in parallel
resonance circuit and also to calculate the resonant frequency.
6.3. To establish phase relationship between voltage and current in a series
circuit consisting of resistance and inductance and to determine power factor
for the circuit.
6.4. Verification of reciprocity theorem applied to passive bilateral linear
network.
6.5. To plot frequency response of RC-low pass and RC-high pass circuit.
6.6. To measure power absorbed in load and to verify that power absorbed
in a load is maximum only when load resistance is equal to source
resistance. Also plot graph between load resistance and power across it.
6.7. To plot frequency response of passive k-derived filter.
6.8. To plot frequency response of m-derived filter.