Scribd
Upload
71 views4 pages

CDMA Network: A. Wireless Specification

The document describes a CDMA network device (F2203 CDMA DTU) that: 1. Uses a high-powered CPU and real-time operating system to integrate communication protocols from the logical link layer to application layer, providing a secure, high-speed wireless internet connection. 2. Supports triggering an online connection through audio, SMS, or data, as well as connecting to double or several data centers. 3. Has been used widely in industries such as finance, utilities, environment, and weather due to its reliable connectivity.

Uploaded by

Shiva Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
71 views4 pages

CDMA Network: A. Wireless Specification

The document describes a CDMA network device (F2203 CDMA DTU) that: 1. Uses a high-powered CPU and real-time operating system to integrate communication protocols from the logical link layer to application layer, providing a secure, high-speed wireless internet connection. 2. Supports triggering an online connection through audio, SMS, or data, as well as connecting to double or several data centers. 3. Has been used widely in industries such as finance, utilities, environment, and weather due to its reliable connectivity.

Uploaded by

Shiva Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

CDMA Network

F2203 CDMA DTU adopts high-powered RISC CPU and


embedded real time operating system. It integrates all
the commonly used protocols from logical link layer to
upper application layer protocols, such as TCP/IP/UDP
and so on. It provides a secure, high speed, reliable
wireless internet connection for customers. It supports
several ways that trigger DTU to be online, including
audio, SMS and data. Also, it supports double or several
data centers.This product has been widely used on
finance, water supply, environment protection, electric
power system, post and weather fields.

A. Wireless Specification

1. Compliant with S-95 A/B and CDMA2000 1xRTT

2. Support 13K QCELP audio codec

B. Hardware System

1. high-powered MCU, 100M


2. Interface:

RS232/RS485 serial port, rates:


110~230400bits/s

Indicator lights: Power, ACT, Online

Antenna interface: standard SMA female


interface, 50 ohm

SIM/UIM interface: standard user card


interface

Power interface: standard 3-PIN power jack

3. Power supply:

Standard power supply: DC 12V/0.5A

Power range: DC 5~35V

4. Wireless module:

High-powered industrial CDMA module

5. Size:

Outline dimension: 91x58.5x22 mm

6. Weight: 630 g

7. Others:

Operation temperature:-25~+65ºC
Storage temperature: -40~+85ºC

Humidity: 95% (unfreezing)

C. Software function

1. Design with standard TCP/IP protocol stack

2. Adopt smart online keeping technology to make


sure that DTU is always online

3. Support RSA and RC4 encryption arithmetic

4. Support VPDN

5. Support transparent data transfer and protocol


conversion. Support multi work modes

6. Support dynamic domain name(DDNS) and IP


access to data center

7. Support double data centers, one main and


another backup

8. Support multi data centers, It can support 5 data


centers at the same time.

9. Support multi online trigger ways, including SMS,


audio and data. Support link disconnection when timeout
10. Support SMS backup and emergency report

11. Support hardware and software WDT

12. Reporting the status of data transfer

13. Standard AT command interface

14. Support common MODEM function

15. Support telnet function

16. Support remote configure and control

17. Easy to upgrade firmware

18. Support multi OS, such as WINDOWS, LINUX,


SCO UNIX etc.

You might also like