C-Band Block

Frequency Converters
Operating Bands
Up-Converters
Single / Dual / Triple / Quad Model
Type RF Output IF Frequency
Number
FCB100
ARUN-LC single
ARUD-LC dual 5.850 - 6.425 GHz
950-1525 MHz
ARUT-LC triple Non-inverted
ARUQ-LC quad
ARUN-LCX single
ARUD-LCX dual 5.850 - 6.725 GHz
950-1825 MHz
ARUT-LCX triple Non-inverted

Features ARUQ-LCX quad

 L-Band IF Down-Converters
 Cost effective solution Model
Type RF Input IF Frequency
 Fully compliant with IESS 308/309 Number
 High linearity AREN-CXL single
 Low group delay ARED-CXL dual 950 – 1750 MHz
3.40 - 4.20 GHz
 Front panel control (local) ARET-CXL triple Inverted
 Full remote control (remote) AREQ-CXL quad
ARDN-CXL single
ARDD-CXL dual 950 - 1750 MHz
Overview ARDT-CXL triple
3.40 - 4.20 GHz
Non-inverted

The Advantech HP range of converters uses the latest technology in ARDQ-CXL quad
conversion, local and remote control thus providing the ultimate in
performance and user friendly operation at a very competitive price. Up/Down -Converters
Model
The spectral purity, low phase noise and stability exceed the Type RF Output IF Frequency
Number
requirements of all major international satellite network operators.
5.850 - 6.425
GHz Non- 950-1525 MHz
The flexible and comprehensive monitor and control features on the Up/
ARMT-LCE
Down
inverted or
HP converter ensure that it will fit into any network management 950-1750 MHz
3.40 - 4.20 GHz
system architecture. The user-friendly front panel or the RS485
Inverted
remote interface will provide full set-up and fault monitoring facilities.
The RS232 will provide the Monitor and Control functions via a PC 5.850 -6.425
and will also allow for software upgrades downloading. GHz Non- 950-1525 MHz
Up/
ARMT-LC
Down
inverted or
3.40 - 4.20 GHz 950-1750 MHz
The PLL oscillator used in the converter is either locked to a highly
stable internal 10 MHz reference or if the external reference option Non-Inverted
is fitted and the proper level of signal is present, the PLL will 5.850 -6.725
automatically lock to the external reference. GHz Non- 950-1825 MHz
Up/
ARMT-LCX
Down
inverted or
3.40 - 4.20 GHz 950-1750 MHz
Non-Inverted
Application 5.850 -6.725
GHz Non- 950-1825 MHz
The HP range of converters is particularly suited for use in VSAT, Up/
ARMT-LCXE
Down
inverted or
SCPC Networks, SNG, DVB-RCS and Hub systems. This makes 3.40 - 4.20 GHz 950-1750 MHz
them an ideal choice for large earth stations requiring cost effective -Inverted
solutions for frequency conversion. The lightweight, rugged and
compact design also ensures that the HP converter provides the
ideal solution for mobile truck or flyaway DSNG systems. With a fully Options
welded aluminum chassis and robust modular internal construction
the converter can even meet the demands of military installations.  Ethernet port and SNMP Interface
 External 10 MHz with Autosensing
The HP range of converters provides an industry leading MTBF of  Spectrum INV or NINV on down converter
over 120,000 hours.
 Dual, quad, Up/Down, or 1:1 redundant hot
swap converters in single 1RU chassis
 Redundant Ready (for 1:N)

www.advantechwireless.com
 C-Band Block Frequency Converters

Technical Specifications
Up-Converter Down-Converter
IF Input RF Input
Frequency range (See table on front page) Frequency range (See table on front page)
Impedance 50  Impedance 50 
Input Connector BNC (female) Input Connector Type N (female)
Return loss 16 dB Return loss 18 dB

RF Output IF Output
Output power (P1dB) 0 dBm Frequency range (See table on front page)
Frequency range (See table on front page) Output level +5 dBm at P1dB
IMD3 (two tone) -40 dBc max @ -10 dBm output Output Connector BNC female
Output connector Type N (female) Connector Impedance 50 
Connector Impedance 50  Return Loss 16 dB
Return loss 18 dB

Transfer Characteristics Transfer Characteristics

Conversion Gain 20 dB @ max gain setting Conversion Gain 40 dB @ max gain setting
Gain adjustment 20 dB Gain adjustment 20 dB
Attenuator step size 0.1 dB Attenuator step size 0.1 dB
±2.0 dB p-p over 800 MHz
±1.5 dB p-p over 575 MHz
Gain flatness Gain flatness (NINV Down Converters)
1.0 dB p-p over 40 MHz + 1.0 dB p-p over 40 MHz
±0.25 dB max. /24 hours ±0.25 dB max. / 24 hours
Gain stability Gain stability
±1 dB over temp. range ±1 dB over temp. range
-55 dBc carrier related @ -10 dBm
Spurious Spurious -55 dBc @ -10 dBm
< -60 dBm non-carrier related
Image rejection 60 dB
Noise Figure 20 dB
Phase noise Meets or Exceeds IESS 308/309 Phase noise Meets or Exceeds IESS 308/309

Reference Mechanical
External Reference 10 MHz, +/- 3 dBm input level Width 19” (482.6 mm)
Internal reference -10
± 2 x 10 / day Dimensions Height 1U 1.75” (44.5 mm)
stability
-8
Aging ± 5 x 10 / year Depth 22” (558.8 mm)

Environmental Power Supply

Operational 0°C to +50°C standard Voltage 90 – 265 VAC (47 – 63 Hz)
Storage -55°C to +85°C Power 50W (typical, single converter)
Humidity Non-condensing Connector IEC 603320 10A
Altitude 3,000m AMSL

Monitor and Control

RS 485 DB9
RS 232 DB9
Discrete DB9
Ethernet (optional) RJ45 F

NORTH AMERICA EUROPE SOUTH AMERICA An ISO 9001 : 2008 Company

USA UNITED KINGDOM Tel: +1 514 420 0045
Tel: +1 703 659 9796 Tel: +44 1480 357 600 Fax: +1 514 420 0073
Fax: +44 1480 357 601
Fax: +1 703 635 2212 [email protected]
[email protected]
[email protected]
RUSSIA & CIS BRAZIL
CANADA Tel: +7 495 971 59 18 Tel: +55 11 3054 5701
Tel: +1 514 420 0045 [email protected] Fax: +55 11 3054 5701 Ref.: PB-FCB100-C-13150
Fax: +1 514 420 0073 [email protected]
[email protected] INDIA
Tel: +91 33 2415 5922
[email protected]

www.advantechwireless.com Specifications are subject to change without prior notice