This document provides specifications for Amphenol Procom's rack-mountable receiver multicoupler series for VHF through low UHF bands from 30 MHz to 960 MHz. The multicouplers have 1 input and 4, 8, 12, or 16 outputs to allow multiple receivers to share the same antenna. They feature wide frequency coverage, low noise figure, high isolation between outputs, and can handle strong RF signals with low distortion. Models are available with 230VAC, 115VAC, 12VDC, or 24VDC power supplies and fit in standard 19" racks.
This document provides specifications for Amphenol Procom's rack-mountable receiver multicoupler series for VHF through low UHF bands from 30 MHz to 960 MHz. The multicouplers have 1 input and 4, 8, 12, or 16 outputs to allow multiple receivers to share the same antenna. They feature wide frequency coverage, low noise figure, high isolation between outputs, and can handle strong RF signals with low distortion. Models are available with 230VAC, 115VAC, 12VDC, or 24VDC power supplies and fit in standard 19" racks.
This document provides specifications for Amphenol Procom's rack-mountable receiver multicoupler series for VHF through low UHF bands from 30 MHz to 960 MHz. The multicouplers have 1 input and 4, 8, 12, or 16 outputs to allow multiple receivers to share the same antenna. They feature wide frequency coverage, low noise figure, high isolation between outputs, and can handle strong RF signals with low distortion. Models are available with 230VAC, 115VAC, 12VDC, or 24VDC power supplies and fit in standard 19" racks.
This document provides specifications for Amphenol Procom's rack-mountable receiver multicoupler series for VHF through low UHF bands from 30 MHz to 960 MHz. The multicouplers have 1 input and 4, 8, 12, or 16 outputs to allow multiple receivers to share the same antenna. They feature wide frequency coverage, low noise figure, high isolation between outputs, and can handle strong RF signals with low distortion. Models are available with 230VAC, 115VAC, 12VDC, or 24VDC power supplies and fit in standard 19" racks.
19" Rack-Mountable Receiver Multicoupler series for the
VHF through low UHF bands 30 MHz - 960 MHz DESCRIPTION Multicouplers with 1 input and 4, 8, 12 or 16 outputs. For use where a number of receivers have to share the same antenna. Active wideband receiver multicoupler for the VHF and low UHF bands with 1 input and 4, 8, 12 or 16 outputs. Allows a number of receivers to share the same antenna without interaction and loss of signal. Wide frequency range: Covers 30 MHz – 960 MHz. If only a smaller frequency range is desired, a preselector filter can be built in to prevent SPECIFICATIONS possible interference from strong transmitters outside the frequency band of interest. Amphenol Procom offer a wide range of both band selective and narrow-band low-loss Electrical filters suitable for preselector use. Please refer to the preselector overview and specify frequency range when ordering. PRO-AR8G-N Model PRO-AR4G-N PRO-AR12G-N Other rack-mounted multicoupler series available: PRO-AR16G-N PRO-ARS: 10 kHz – 108 MHz Gain (Input To All Outputs) 2 dB PRO-ARU: 690 MHz – 2700 MHz Frequency 30 - 960 MHz
Ultra-high dynamic range amplifier built in to compensate for loss in multicoupler Noise Figure, Amplifier < 4.0 dB < 6.0 dB
network. Effective Noise Figure All Outputs < 5.5 dB < 8.0 dB Push-pull high-current amplifier design ensures outstanding multicoupler linearity and Gain Variance < ±2.0 dB high reject of especially even-order distortion products. Maximum Ouput Power @P1dB > +20 dBm > +17 dBm Handles even very strong RF signals with negligible levels of IM and harmonic OIP2 > +60 dBm > +50 dBm distortion. OIP3 > +33 dBm > +25 dBm Low amplifier noise figure ensures lowest possible S/N deterioration of the received and Impedance 50 Ω distributed RF signals. Max. 2.5:1 Input SWR High isolation between receiver outputs. With Preselector: Max. 2.0:1, typ. <1.5:1 Operates on 230 VAC or 115 VAC mains supply or 12 V or 24 V DC supply (depending Output SWR < 1.5:1 on type, see ordering designations). Maximum Input Power (dBm) 18 dBm Galvanically isolated power supply with power backup function. 30 - 50 MHz: > 18 dB Automatic switching to DC supply if the mains supply fails. Isolation Between Outputs 50 - 800 MHz: > 20 dB 800 - 960 MHz: > 18 dB ”POWER ON” lamp on front. Input-Output Isolation > 23 dB > 46 dB Mains supply connector: IEC type fitted with noise filter. DC supply connector: Terminal block fitted with noise filter. 230 V models: 198 to 264 VAC 47 - 63 Hz/ Max. 0.16 A RF connectors: N-female on all ports (other types on request). Power Supply 115 V models: 19” rack module housing. 100 to 127 VAC 47 - 63 Hz/ Max. 0.32 A Only 1 HU (PRO-AR4G-... and PRO-AR8G-...) PRO-AR8G-... : 1.0 to 1.3 A Current Consumption 0.6 to 0.7 A PRO-AR12G-… : 1.4 to 1.7 A or 2 HU (PRO-AR12G-... and PRO-AR16G-...) (1 height unit = 44.45 mm). PRO-AR16G-… : 1.8 to 2.1 A Available with black powder lacquered front plate. DC Supply, 12 V Types 10.8 to 14.4 VDC Front plate black structure powder painted. DC Supply, 24 V Types 20 to 28 VDC
Mechanical
Power Connector 3-terminal IEC60320-1 C14 (male)
Connection(s) N female (standard), BNC, TNC or SMA on request DC Connector 3-pole screw terminal block PRO-AR4G-..., PRO-AR8G-...: 19" x 1HU x 261 mm (483 x 44.45 x 261 mm) / (19.02 x 1.75 x 10.28 in.) Dimensions PRO-AR12G-..., PRO-AR16G-...: 19" x 2HU x 261 mm (483 x 89.9 x 261 mm) / (19.02 x 3.54 x 10.28 in.) Altitude 0 to 2000 m PRO-AR4G-..., PRO-AR8G-...: Approx. 2.8 kg. / 6.17 lb. Weight PRO-AR12G-..., PRO-AR16G-...: Approx. 4.4 kg. / 9.70 lb.
Environmental
Operating Temperature Range -10°C to +50°C
Humidity < 90% non-condensing
Page: 1 Last edited: 2019/02/01 PRO-AR...G
ORDERING MODEL HOUSING
Type Product No. Description PRO-AR4G-N AND PRO-AR8G-N
PROCOM A/S reserves the right to PROCOM A/S • Smedetoften 12 Page: 2
amend specifications without prior notice DK03600 Frederikssund • Denmark Last edited: 2019/02/01 PRO-AR...G
LOW-LOSS PRESELECTOR FILTERS FOR PRO-AR...G, OVERVIEW
Band selective standard blackbox filters (other filters on request)
TYPE DESIGNATION FILTER TYPE PASS BAND FREQUENCY RANGE
BPF 66-88 Band pass 66 - 88 MHz
BPF 88-108 Band pass 88 - 108 MHz BPF 112-136 Band pass 112 - 136 MHz BPF 118-137 Band pass 118 - 137 MHz BPF 118-174 Band pass 118 - 174 MHz BPF 136-225 Band pass 136 - 225 MHz BPF 146-174 Band pass 146 - 174 MHz BPF 174-240 Band pass 174 - 240 MHz BPF 210-225 Band pass 210 -225 MHz BPF 225-400 Band pass 225 - 400 MHz BPF 300-500 Band pass 300 - 500 MHz BPF 800-1000 Band pass 800 - 1000 MHz LP 174-FME Low pass 0 - 174 MHz HP 380-FME High pass 380 - 1000 MHz High slope band selective standard PRO filters (other filters on request):
TYPE DESIGNATION FILTER TYPE PASS BAND FREQUENCY RANGES STOP BAND ATTENUATION / FREQUENCY RANGES
PRO-BPF 118-144-N Band pass 118 - 144 MHz ≥ 45 dB 0-108 MHz and 170 - 520 MHz PRO-LPF 225-N Low pass 0 - 225 MHz ≥ 50 dB 267-500 MHz PRO-HP144-N High pass 144 - 1000 MHz ≥ 60 dB 0-108 MHz PRO-HP225.N High pass 225 - 1000 MHz ≥ 70 dB 0-175 MHz Narrow band standard BP filters:
TYPE DESIGNATION FILTER TYPE CENTER FREQUENCY -1 dB BANDWIDTH
BPF 4/4-[BW] Band pass To be ordered within 66 - 88 MHz To be specified as 2, 4 or 6 MHz
BPF 3/4 Band pass To be ordered within 112-136MHz 1.5 MHz BPF 2/4-[BW] Band pass To be ordered within 144-175MHz To be specified as 2, 4 or 6 MHz BPF 70/4-HX Band pass To be ordered within 380-470MHz To be ordered within 3-15 MHz BPF 900/4 Band pass To be ordered within 820-960MHz Typ. 7 MHz
HOW TO ORDER CUSTOMIZED TYPES
PRO-AR 8G -N(f) -BPF -115V/24 V
↓ ↓ ↓ ↓ ↓ Series No. of outputs Connector type Preselector filter** Supply voltage 4 outputs = 4G No filter = blank* 230VAC/12 VDC = blank* N-female = -N(f) 8 outputs = 8G Band pass = -BPF 230VAC/24 VDC = -24 V PRO-AR TNC-female = -TNC(f) 12 outputs = 12G High pass = -HPF 115VAC/12VDC = -115 V/12 V BNC-female = -BNC(f) 16 outputs = 16G Low pass = -LPF 115VAC/24VDC = -115 V/24 V * "blank" means sign omitted. ** Preselector pass band [MHz] to be stated after the ordering designation.
EU DECLARATION OF CONFORMITY Hereby Amphenol Procom declare that the product type PRO-AR...G is in compliance with EU Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at:
