School of Electrical Engineering, KIIT University
Module Descriptor
Module Title: Power System Operation and Control
Module Code: EE 3002
Effective From: 2015-2016
Module Level: 6
Credit Points: 4
Contact Hours/Week : 4:0:0 (4hours/week)
Prerequisites: - Basic Electrical Engineering (EE 1003), A.C Machines (EE2002), Electric
Power Transmission and Distribution (EE3001) Linear Control Theory (EE3003)
Hours:
Hours Lecture 40 hours
Seminar 5 hours.
Tutorial 15hours.
Practical/ Demonstration 0
Independent Study 20 hours.
TOTAL EFFORT 80 hours
HOURS
Rationale:
Learning Outcome
Outcome-1: Ability to model speed governing system
Outcome-2: Detect and analyse different type of faults in power system.
Outcome-3: Ability to solve and analyse load flow problems.
Outcome-4: Ability to analyse economic operation of power system generation.
Outcome-5: Ability to comprehend and use different techniques for solving problems of power
system stability.
Outcome-6: Ability to analyse the concepts of generation control and voltage control.
Lesson Plan:
Module No & Name Topics Lecture/T No of Lecture/Tutor
utorial Lectures/se ial Serial no.
minars/Tut
orials
1. Load Flow 1. Introduction and Importance of load flow L
Studies
2. Bus classification Development of load flow L
equation
3. Gauss Siedel method without PV L
8 1-8
4. Gauss Siedel method with PV and L
acceleration of convergence
EE-3002 Prof. S. R.Ghatak
School of Electrical Engineering, KIIT University
Module Descriptor
5. Newton Raphson Method 2L
6. Fast Decoupled method 2L
Tutorial 3
Seminar 1
2. Economic 1. Optimal Operation of Generation 2L
Operation of
Power System
2. Load distribution in various generation 2L
3. Penalty factor and 2L 7 9-15
Transmission losses
4. Automatic load dispatch L
Seminar 1
Tutorial 3
3. Automatic 1. Introduction of Load frequency control L
Generation and
voltage control
2. Turbine speed governing system and L
modeling
3. Turbine model, Generator load model, L 10 16-25
and integration of all
4. Steady state analysis Dynamic Analysis L
5. Dynamic Analysis L
6. Control area concept ( P, PI, PID) L
7. Two area LFC 2L
8. AVR L
9. Excitation system (DC, AC and static) L
Seminar 1
Tutorial 3
4. Power System 1. Introduction to stability, Dynamics 2L 7 26-32
stability of synchronous machine
2. Swing Equation L
3. Power angle curve and its equation L
4. Steady state stability L
5. Equal area criteria of different condition L
6. Critical clearing time and angle L
Tutorial 3
Seminar 1
1. Introduction to fault. L
5. Symmetrical and
unsymmetrical Fault 2. Transients in transmission line and Short 2L
analysis circuit of Synchronous Machine
EE-3002 Prof. S. R.Ghatak
School of Electrical Engineering, KIIT University
Module Descriptor
3. Symmetrical Component L
4.Sequence impedance and sequence L 8 33-40
network
5. Symmetrical Fault(LLL and LLLG) L
6.Unsymmetrical Fault (LG,LL, LLG) 2L
Tutorial 3
Seminar 1
Self-Study
Teaching and Learning Methods:
1.Lectures: The class room teaching is followed by the syllabus, lesson plan .
2.PPT Presentation: PPT file is most essential where it involves problems and complicated
equations
3.Seminar: This helps the student to be more involved in the class and can have better
knowledge in the topics.
4.Interactive Teaching: This process is very effective to involve the student in the class. The
student will get better knowledge in this process.
5.E-Learning: It is told the student to refer NPTEL material and also some books for few
topics for their better knowledge
Assessment
1. Quiz test- There are two quiz test.
2. Assignment: Four assignments based on theory topics.
3. Mid-Semester Examination: There are 6 questions. Out of which students have to answer
5 nos. including question 1 which is compulsory.
4. End-Semester Examination: There are 8 questions. Out of which students have to answer
6 nos. including question 1 which is compulsory.
Reading List:
Text Books :
Modern Power System Analysis by I J Nagrath and D P Kothari 4th edition Tata
McGraw Hill2011
Power System Analysis by J J Grainger and W D Stevenson McGraw Hill 1994
EE-3002 Prof. S. R.Ghatak
School of Electrical Engineering, KIIT University
Module Descriptor
Reference Books:
Power System Analysis and Design by B R Gupta 7th edition S.Chand 2013.
Electric Power System by C. L. Wadhwa6th edition New age International publisher
2010.
A Course in Electic Power by Soni , Gupta & Bhatnagar
NPTEL: It is advised the students to refer NPTEL materials.
Mapping of learning outcome to PLO
a b c d e f g h I j k l m n o
LO1 S M - - M - - - - - M - - - M
LO2 M M M S M - - - - - M - - M M
LO3 M M M S M - - - - - M - - M -
LO4 S S M M S - - - - - M - - - -
LO5 M M - M M - - - - - W - - - -
LO6 - - - M M - - - - - - - - M -
EE-3002 Prof. S. R.Ghatak
