Champ FMV Led Floodlights 2l
Champ FMV Led Floodlights 2l
Champ FMV Led Floodlights 2l
2, Groups A, B, C, D
Cl. I, Zone 2
UL Listed
CSA Certified
2L
floodlights Cl. II, Groups E, F, G IEC/ATEX/CE
Cl. III & Simultaneous Presence Type 4X; IP66
Champ® FMV LED floodlights are designed to provide full-spectrum, crisp, white light. Seven
versions of the FMV LED are available, from 3,000 to 15,000 lumens, providing ideal solutions
for a wide range of harsh and hazardous applications.
Nominal Lumens Equivalent HID
Model lumensA Watts per watt luminaire Energy savings
FMV3L 3,189 28 114 70W-100W
FMV5L 5,183 45 115 100W-150W Up to 75% reduction in
FMV7L 7,095 62 114 150W-175W energy costs and 150,000
FMV9L 9,132 79 116 175W-250W
hours of continuous
FMV11L 11,107 99 112 250W-400W
FMV13L 13,100 112 117 400W operation
FMV15L 15,181 131 116 450W
LED system:
Applications: Certifications and • Cool white (5000K, 70 CRI) and warm
white (3000K, 80 CRI)
• Oil and gas refineries, drilling rigs, compliances:
petrochemical facilities, food and beverage • Custom designed optics – 7x6 standard;
• DesignLights Consortium® Qualified (some 3x3 (optional) (FMV3L-FMV11L)
facilities, platforms, loading docks,
models are not DLC qualified)B
tunnels, outdoor wall and stanchion
mounted general area lighting, and where NEC/CEC:
flammable vapors, gases, ignitable dusts, • Class I, Division 2, Groups A, B, C, D;
Photometrics:
fibers or flyings are present Class I, Zone 2; Class II, Groups E, F, G; • Complete photometrics can be found at
• Locations requiring continuous and Simultaneous Presence; Class III www.crouse-hinds.com/photometrics
consistent light levels in extreme ambient • Type 4X, IP66
temperatures
UL standards: Effective projected area
• Where extremely corrosive, wet, dusty,
hot and/or cold conditions exist
• UL844; UL1598; UL1598A; UL8750 (EPA):
CSA standard: FMV3L-FMV15L
• IP66, Type 4X, marine, wet locations and
hose down environments • CSA C22.2 No. 137 Maximum EPA 1.50
• Classified and hazardous locations IEC standards:
• IECEx UL 15.0029 Electrical ratings:
Features: • Ex nA IIC T5 Gc Tamb -40°C to +40°C
• Instant illumination and restrike Input power Input amps at
• Ex nA IIC T4 Gc Tamb -40°C to +55°C Model (watts) 120-277 VAC
• Better visibility with crisp, white light • Ex tb IIIC T65 Db Tamb -40°C to +40°C FMV3L 28.0 - 29.1 0.24 - 0.11
• 0-10V dimming • Ex tb IIIC T80 Db Tamb -40°C to +55°C FMV5L 45.4 - 45.8 0.38 - 0.18
• Cold temperature operation/no warm-up FMV7L 61.8 - 62.5 0.52 - 0.24
ATEX/CE:
required FMV9L 78.8 - 80.3 0.66 - 0.31
• 0359 DEMKO 15 ATEX 1377 FMV11L 98.8 - 99.9 0.83 - 0.37
• Minimum T3C temperature rating –
• 0359 DEMKO 15 ATEX 1383 FMV13L 111.8 - 112.4 0.94 - 0.42
safely operate in the most hazardous FMV15L 131.4 - 131.5 1.10 - 0.48
environments and any non-hazardous • II 3 G Ex nA IIC T5 Gc Tamb -40°C to
location +40°C FMV3L-FMV15L
• Serviceable drivers • II 3 G Ex nA IIC T4 Gc Tamb -40°C to 100-277V at 50/60 Hz;
+55°C Voltage range, VAC
• Easy installation – yoke design to mount 347-480V at 50/60 Hz
to SFA6 • II 2 D Ex tb IIIC T65 Db Tamb -40°C to Voltage range, VDC 108-250V
• Energy-efficient technology – up to 72% +40°C Power factor >0.90
energy savings over HID fixtures • II 2 D Ex tb IIIC T80 Db Tamb -40°C to
+55°C
• 60,000 hours of rated life at 55°C – Drivers:
eliminates need for frequent lamp
replacement Standard materials: Option FMV3L-FMV15L
• Contains no mercury or other hazardous • Lamp housing and adapter – die cast NEC: 100-277 VAC, 108-250 VDC;
substances /UNV1
aluminum with Corro-free epoxy powder IEC: 100-252 VAC, 111-227 VDC
• Shock- and vibration-resistant solid state coat NEC: 347-480 VAC;
luminaires have no filaments or glass /UNV34
• Lens – heat- and impact-resistant glass IEC: 385-436 VAC
components that could break – greatly (standard)
reduces the risk of premature failure
• Gaskets – silicone and neoprene
• Operating ambient: -40°C to 65°C (NEC
only; IEC: -40°C to 55°C) • External hardware – stainless steel
• 5 year fixture warranty
Versatile design
2L
• Can be used for outdoor
or indoor applications, High lumen output
and for a wide range • Up to 117 lumens per watt
of mounting heights • Up to 72% energy savings
depending on model and over traditional HID fixtures
light level requirement (compared to 400W MH)
Full-frame yoke
• Designed to utilize the
SFA6 slipfitter and SWB6
wall mount bracket,
making it ideal for retrofit
or new installations
Ordering information:
2L
5L S903
Model Mounting Options
FMV
NEC & IEC Y Yoke S891 Diffused glass lens
model
S903 Polycarbonate lens
33
3x3 floodlight
pattern optics
Color temperature
Voltage
2L
Simultaneous
rating
Ambient Class I, Class II, Class I, Class I, Minimum
Model temp. °C Div. 2 Div. 1 Div. 2; Div. 1 Zone 2 ATEX 3G ATEX 2D wire temp. °C
40 T5 T4 T4 T5 T5 T65 90
FMV3L-FMV15L 55 T4A T3C T3C T4 T4 T80 90
65 T4A T3C T3C T4 – – 90