SPECIFICATIONS / PARTS LIST

Models 4528, 4528EZ, and 4728 Monitors

CX-645 Probe – Water Cut Monitors
Bulletin SSIN015 Issue/Rev. 0.1 (11/18)

Model 4728 Monitors

The INVALCO Model 4728 Water Cut Monitor, in

conjunction with a Model 4528 Detector and a Model
CX-645 Capacitance Probe is a continuous on-line monitor
or percent water in a flowing crude oil emulsion stream.
This unit displays percent of water in various ranges from
0-5% up to and including 0-20% on a digital LCD indicator.
In addition, the Model 4728 provides a 4-20 mA analog
output proportional to input range, and a field-adjusted,
time-delayed, limit relay for valve control or alarming.

Features Model CX-645

Capacitance Probe and
• Real-time display and retransmission of water Model 4528 Detector
cut monitor: Allows quick response to upset
conditions for downstream controls.
• Adjustable delay of relay closure: Prevents
nuisance alarms and “actuator overload”. Applications
• Direct analog output from model 4528 detector: LACT (Lease Automatic Custody Transfer) Units
A 4-20 mA signal is available from the probe without Detect and provide relay contact closure that can be
the need to include the Model 4728 monitor. used to reroute oil that has excess water cut.
• NACE adaptable: Can be modified for use in Pipeline Loading
NACE applications.
Monitor transfer of petroleum/condensate products from
loading facilities.

Dehydration Equipment
Determine and enhance equipment efficiencies, by
monitoring the product and indicating water content.

Fuel Oil Monitoring

Determine contamination of fuel oil by condensation,
or other external factors, before entry to engine.

Storage and Treating Facilities

Monitoring and early detection of undesirable conditions
as well as interface detection during dewatering of storage
tanks.
Model 4728 Specifications 6.9"
(175)
NEMA 4X
4"
Power Supply Weatherproof (101)

- 18-28 Vdc @ 130 mA Housing

- 115/220 Vac

Water Cut Monitor Full Scale Range

0-5%, 0-10%, and 0-20% range options. 8.9"
(226)

Display 10"
(253)
Four digit LCD with decimal point.

Analog Outputs
4-20 mA, 2-wire internally powered or 4-20 mA, 4.4"
3-wire externally powered. (112)

Relay Output
- SPDT Relay, 10A, 250 Vac.
NEMA 7 6.2"
- 1/2 Hp 250 Vac, 10A - 120 Vac resistive. (166)
9.8"
- 1/3 Hp 120 Vac, 10A - 30 Vdc resistive. Explosion- (274)

Proof Housing
Time Delay
- 0 to 90 seconds adjustable in 10 second increments.
- Off-delay approximately 10% of on-delay time. 10.2"
(258)
Temperature Range
8.8"
0°F to 160°F (-20°C to 70°C). (222)

Enclosures
- NEMA 4X, weatherproof.
- NEMA 7, explosion-proof, Class I, Division 1, Groups C 8.2"
(207)
and D.

Dimensions – Inches to the nearest tenth (millimeters to the nearest

whole mm), each independently dimensioned from engineering
Model 4728 Dimensional Specifications drawings.
The Model 4528 Detector and Model CX-645 Probe provide
a direct analog (0-5 Vdc or 4-20 mA) output of percent Model 4728 Ordering Information
emulsified water (as Water Cut Monitor) in the process
stream. This signal is designed to be used externally by the Model Description Part Number
Model 4728 monitor or other control devices such as PLC’s 4728 Oil/Water Monitor, All
4728-PM 81001148
or Remote Terminal Systems. Ranges, Panel Mount
4728 Oil/Water Monitor, 0-5%
The probe is constructed of two concentric tubes. Wetted 4728-5WP 81001114
range, Nema 4X - WP
surfaces are coated with a baked-on phenolic two-part
4728 Oil/Water Monitor, 0-5%
epoxy. The inner tube is insulated from the outer tube by 4728-5XP 81001115
range, Nema 7 - XP
polytetrafluoroethylene (PTFE) spacers and is electrically
4728 Oil/Water Monitor,
connected to a terminal within the sensor housing. The 4728-10WP 81001126
0-10% range, Nema 4X - WP
internal element spacers can be fitted with trimmer rods
4728 Oil/Water Monitor,
should it be necessary to adjust the base capacitance. 4728-10XP 81001116
0-10% range, Nema 7 - XP
The detector operates from a 12 Vdc regulated power 4728 Oil/Water Monitor,
4728-20WP 81001128
supply from within the associated monitor or customer 0-20% range, Nema 4X - WP
supplied source. All calibration and adjustments can be 4728 Oil/Water Monitor,
4728-20XP 81001117
accessed through the front panel for ease of use. The Model 0-20% range, Nema 7 - XP
4528 detector offers the flexibility of a high and low fail-safe.
This fail-safe feature guarantees the quality of the output
signal from the detector chassis and will sense over- and
under-range conditions as well as an open or shorted probe.

2 Bulletin SSIN015 Issue/Rev. 0.1 (11/18)

 Model 4528 Detector / Probe Specifications
Power Supply 1.25" FNPT
Conduit
- 12 Vdc @ 130 mA for 0-5 Vdc output. Connection
- 24
Capacitance Vdc required
Probe for 4-20 mA output.
Model 4728 Model 4528
Model CX-645 & Oil/Water Monitor Exp. Housing
Water Cut Monitor Range
4528 Detector
Analog
0-5%, 0-10%, and 0-20%.Output
Four Dimension “B”
Conductor Cable
Measurement Accuracy Element
(Inner Plate) PTFE Insulator
±1.0% of full scale.
Recorder,
PLC/DCS
Resolution/Sensitivity System
±0.5% of full scale.

Probe Material
Trimmer Rod Probe Body
A53 GrB Carbon Steel is standard. (Stainless Steel (If needed) (Outer Plate)
available.) Dimension “A”

Probe Finish
Size Dim A. Dim B. Weight (lb)
Baked-on phenolic two-part epoxy.
2 Inch 17.0" (431) 9.8" (247) 20
Probe Material 3 Inch 32.0" (811) 10.9" (275) 45
A53 GrB Carbon Steel is standard. (Stainless Steel 4 Inch 32.0" (811) 11.9" (301) 72
available.)
6 Inch 32.0" (811) 14.0" (355) 127 3 Hour

Probe Sizes/Length 8 Inch 32.0" (811) 16.0" (405) 190

- 2" I.D. is 17" face-to-face. 10 Inch 32.0" (811) 18.1" (459) 268
- 3" to 12" I.D. sizes are 32" face-to-face. 12 Inch Consult Factory.

Process Connections
- ANSI RF or RTJ Flanges to 600# (all sizes) CX-645 Capacitance
6.9”
Probe and Model 4528
(others by special order). Detector (175)
4”
(101) 6.2” 9.8”
- Threaded MNPT or Grooved (2" and 3"). (166) (274)
Part
Model Description
Number
Pressure Ratings Water Cut Monitor Detector for
- As per Flange selection, 1440 psig max. 4528-5 CX-6458.9”probe, 0-5% range,
10.2”
(258) 81001164
(226)
- NPT - 1440 psig max. (Victualic grooved - 350 psig). 0-5VDC output
10” 8.8”
Water Cut(253)Monitor Detector for (222)
Temperature Range 4528-5A CX-645 probe, 0-5% range, 81001295
0°F to 165°F standard. (-20°F to 375°F optional.) 4-20mA output
4.4” 8.2”
Water
(112) Cut Monitor Detector for (207)
Approvals 4528-10 CX-645 probe, 0-10% range, 81001160
UL/C-UL Explosion-proof certificate for Class I, 0-5VDC output
Div. 1, Groups C and D or Class II, Groups E, F, Water Cut Monitor Detector for
and G hazardous locations. 4528-10A CX-645 probe, 0-10% range, 81001294
4-20mA output
Water Cut Monitor Detector for
4528-20 CX-645 probe, 0-20% range, 81001161
0-5VDC output
Water Cut Monitor Detector for
*0°F to 180°F dimension given. For -20°F to 375°F 4528-20A CX-645 probe, 0-20% range, 81001162
dimension add 6.4". 4-20mA output
4528 Test Kit 81000520
Water Cut Monitor Detector for
4528EZ CX-645 probe, Field Selectable P518796
Range 0-5%, 0-10%, 0-20%

Bulletin SSIN015 Issue/Rev. 0.1 (11/18) 3

Typical Applications 1.25" FNPT
Conduit 1.25" FN
Connection Conduit
Capacitance Probe Model 4728 Connecti
Model CX-645 & Capacitance Probe Monitor Model 4728
Oil/Water Capacitance Probe Model 4728
4528 Detector Model CX-645 & Oil/Water Monitor Model CX-645 & Capacitance Probe
Oil/Water Monitor Model 4728
4528 Detector 4528 Detector Model CX-645 & Oil/Water Monitor
Four 4528 Detector Analog
Conductor Cable Four Analog Four Output Analog
Conductor Cable
Output Analog Conductor Cable Four Output
Output Conductor Cable Element
(Inner Plate) Elem
(Inn
Recorder,
PLC/DCS Recorder,
System PLC/DCS
System
Solenoid
Solenoid
Diverter
Valve Diverter Trimmer Rod
Valve (If needed) Trim
(If n
Percent Water Indication and Set-Point Control Percent Water Recording Dimension
In this application the adjustable alarm may be used to In this application the Model 4728 provides local reading
operate a diverter valve should the water content exceed on an LCD display and provides an analog output
a preset percentage. Local indication is provided and an (4-20mA) to a standard recorder, PLC, or DCS System.
analog output for other indication or control functions is This configuration is used to monitor and control Separator
available. and Heater-Treater efficiencies as well as other oil field
and industrial applications.

CX-645 Capacitance Probe Ordering Information

Water Cut Monitor PROBE, Ranges from 0-20% water - to be used with Model 4528 Detector
CX-645
PROBE MATERIAL: Carbon Steel
|‌ CODE PROBE BODY SIZE 6.9”
(175)
6.9”
|‌ 2 2 INCH I.D. x 17” FACE TO FACE 4”
(101)
(175)
4”
|‌ 3 3 INCH I.D. x 32" FACE TO FACE (101)

|‌ 4 4 INCH I.D. x 32” FACE TO FACE

|‌ 6 6 INCH I.D. x 32” FACE TO FACE
|‌ 8 8 INCH I.D. x 32” FACE TO FACE 8.9”
(226)

|‌ |‌ CODE END CONNECTIONS 10”

(253)
|‌ |‌ 00 SCREWED ENDS (TO 3" ONLY)
|‌ |‌ 00 GROOVED ENDS / VICTAULIC (TO 4" ONLY)
|‌ |‌ 00 150 LB ANSI RAISED FACE 4.4”
(112)
4.4
|‌ |‌ 30 300 LB ANSI RAISED FACE (11

|‌ |‌ 60 600 LB ANSI RAISED FACE (SCH 80) (FOR 8" AND 10")
|‌ |‌ 90 900 LB ANSI RAISED FACE (SCH 80)
|‌ |‌ 05 150 LB ANSI RTJ
|‌ |‌ 35 300 LB ANSI RTJ
|‌ |‌ 65 600 LB ANSI RTJ (SCH 80) (FOR 8" AND 10")
|‌ |‌ 95 900 LB ANSI RTJ (SCH 80)
|‌ |‌ 115 1500 LB ANSI RTJ (SCH 160)
|‌ |‌ |‌ CODE MATERIAL AND TEMPERATURE OPTIONS
|‌ |‌ |‌ B STANDARD MATERIALS, A105 CARBON STEEL, 0-200° F
|‌ |‌ |‌ H STANDARD MATERIALS/HIGH TEMP, 0-375° F
|‌ |‌ |‌ S 316 STAINLESS STEEL MATERIALS
|‌ |‌ |‌ T 316 STAINLESS STEEL/HIGH TEMP, 0-375°F
|‌ |‌ |‌ |‌ CODE CONNECTION STYLE
|‌ |‌ |‌ |‌ S
|‌ |‌ |‌ |‌ G
|‌ |‌ |‌ |‌ F
|‌ |‌ |‌ |‌ |‌ CODE OPEN
| | | |‌ |‌ P PHENOLIC COATING (INTERIOR)
EXAMPLE: | | | | |
CX - 645 - B F P = CX-645-360-BFP
Choose one code selection from each option group to build model number.
Model 4528 Detector must be ordered separately to complete assembly. Probe sizes through 16" are available, please consult factory.

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in
effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.

USA Operation
1602 Wagner Avenue
Erie, Pennsylvania 16510 USA
P:+1 814.898.5000
TechnipFMC
FMC Technologies, Inc. Germany Operation
13460 Lockwood Road Smith Meter GmbH
TechnipFMC.com Building S01 Regentstrasse 1
Houston, Texas 77044 USA 25474 Ellerbek, Germany
© TechnipFMC 2018. All rights reserved. SSIN015 Issue/Rev. 0.1 (11/18) P:+1 281.591.4000 P:+49 4101.304.0