Earthquake-Resistant Structures Are

Earthquake-
resistant structures
Earthquake-resistant structures are

structures designed to protect buildings
from earthquakes. While no structure can
be entirely immune to damage from
earthquakes, the goal of earthquake-
resistant construction is to erect
structures that fare better during seismic
activity than their conventional
counterparts. According to building codes,
earthquake-resistant structures are
intended to withstand the largest
earthquake of a certain probability that is
likely to occur at their location.This means
the loss of life should be minimized by
preventing collapse of the buildings for
rare earthquakes while the loss of the
functionality should be limited for more
frequent ones.[1]
To combat earthquake destruction, the

only method available to ancient architects
was to build their landmark structures to
last, often by making them excessively
stiff and strong.
Currently, there are several design
philosophies in earthquake engineering,
making use of experimental results,
computer simulations and observations
from past earthquakes to offer the
required performance for the seismic
threat at the site of interest. These range
from appropriately sizing the structure to
be strong and ductile enough to survive
the shaking with an acceptable damage, to
equipping it with base isolation or using
structural vibration control technologies to
minimize any forces and deformations.
While the former is the method typically
applied in most earthquake-resistant
structures, important facilities, landmarks
and cultural heritage buildings use the
more advanced (and expensive)
techniques of isolation or control to
survive strong shaking with minimal
damage. Examples of such applications
are the Cathedral of Our Lady of the
Angels and the Acropolis Museum.
Trends and projects

Some of the new trends and/or projects in
the field of earthquake engineering
structures are presented.
Building materials
Based on studies in New Zealand, relating
to Christchurch earthquakes, precast
concrete designed and installed in
accordance with modern codes performed
well.[2] According to the Earthquake
Engineering Research Institute, precast
panel buildings had good durability during
the earthquake in Armenia, compared to
precast frame-panels.[3]
Earthquake shelter
One Japanese construction company has

developed a six-foot cubical shelter,
presented as an alternative to earthquake-
proofing an entire building.[4]
Concurrent shake-table testing
Concurrent shake-table testing of two or

more building models is a vivid, persuasive
and effective way to validate earthquake
engineering solutions experimentally.
Thus, two wooden houses built before

adoption of the 1981 Japanese Building
Code were moved to E-Defense[5] for
testing (see both pictures aside). The left
house was reinforced to enhance its
seismic resistance, while the other one
was not. These two models were set on E-
Defense platform and tested
simultaneously.[6]
Combined vibration control
solution
Close-up of abutment of seismically retrofitted

Municipal Services Building in Glendale, California
Seismically retrofitted Municipal Services Building in

Seismically retrofitted Municipal Services Building in
Glendale
Designed by architect Merrill W. Baird of

Glendale, working in collaboration with A.
C. Martin Architects of Los Angeles, the
Municipal Services Building at 633 East
Broadway, Glendale was completed in
1966.[7] Prominently sited at the corner of
East Broadway and Glendale Avenue, this
civic building serves as a heraldic element
of Glendale's civic center.
In October 2004 Architectural Resources

Group (ARG) was contracted by Nabih
Youssef & Associates, Structural
Engineers, to provide services regarding a
historic resource assessment of the
building due to a proposed seismic retrofit.
In 2008, the Municipal Services Building of

the City of Glendale, California was
seismically retrofitted using an innovative
combined vibration control solution: the
existing elevated building foundation of
the building was put on high damping
rubber bearings.
Steel plate walls system

Coupled steel plate shear walls, Seattle
The Ritz-Carlton/JW Marriott hotel building engaging

the advanced steel plate shear walls system, Los
Angeles
A steel plate shear wall (SPSW) consists
of steel infill plates bounded by a column-
beam system. When such infill plates
occupy each level within a framed bay of a
structure, they constitute a SPSW
system.[8] Whereas most earthquake
resistant construction methods are
adapted from older systems, SPSW was
invented entirely to withstand seismic
activity.[9]
SPSW behavior is analogous to a vertical

plate girder cantilevered from its base.
Similar to plate girders, the SPSW system
optimizes component performance by
taking advantage of the post-buckling
behavior of the steel infill panels.
The Ritz-Carlton/JW Marriott hotel

building, a part of the LA Live development
in Los Angeles, California, is the first
building in Los Angeles that uses an
advanced steel plate shear wall system to
resist the lateral loads of strong
earthquakes and winds.
Kashiwazaki-Kariwa Nuclear
Power Plant is partially
upgraded
The Kashiwazaki-Kariwa Nuclear Power

Plant, the largest nuclear generating
station in the world by net electrical power
rating, happened to be near the epicenter
of the strongest Mw 6.6 July 2007 Chūetsu
offshore earthquake.[10] This initiated an
extended shutdown for structural
inspection which indicated that a greater
earthquake-proofing was needed before
operation could be resumed.[11]
On May 9, 2009, one unit (Unit 7) was

restarted, after the seismic upgrades. The
test run had to continue for 50 days. The
plant had been completely shut down for
almost 22 months following the
earthquake.
Seismic test of seven-story
building
A destructive earthquake struck a lone,

wooden condominium in Japan.[12] The
experiment was webcast live on July 14,
2009 to yield insight on how to make
wooden structures stronger and better
able to withstand major earthquakes.[13]
The Miki shake at the Hyogo Earthquake

Engineering Research Center is the
capstone experiment of the four-year
NEESWood project, which receives its
primary support from the U.S. National
Science Foundation Network for
Earthquake Engineering Simulation (NEES)
Program.
"NEESWood aims to develop a new

seismic design philosophy that will provide
the necessary mechanisms to safely
increase the height of wood-frame
structures in active seismic zones of the
United States, as well as mitigate
earthquake damage to low-rise wood-
frame structures," said Rosowsky,
Department of Civil Engineering at Texas
A&M University. This philosophy is based
on the application of seismic damping
systems for wooden buildings. The
systems, which can be installed inside the
walls of most wooden buildings, include
strong metal frame, bracing and dampers
filled with viscous fluid.
Superframe earthquake proof

structure
The proposed system is composed of core

walls, hat beams incorporated into the top
level, outer columns and viscous dampers
vertically installed between the tips of the
hat beams and the outer columns. During
an earthquake,the hat beams and outer
columns act as outriggers and reduce the
overturning moment in the core, and the
installed dampers also reduce the moment
and the lateral deflection of the structure.
This innovative system can eliminate inner
beams and inner columns on each floor,
and thereby provide buildings with column-
free floor space even in highly seismic
regions.[14][15]
See also
Wikimedia Commons has media related to
Earthquake engineering structures.
Earthquake Baroque
Emergency management
Geotechnical engineering
Seismic response of landfill
Seismic retrofit
Tsunami-proof building
References
1. Seismology Committee (1999).
Recommended Lateral Force Requirements
and Commentary. Structural Engineers
Association of California.
2. Precast New Zealand Inc: Precast
concrete and seismic issues
3. "Precast concrete panel building
damage, comparing the performance of
precast frame-panel (collapsed in
foreground) and precast panel buildings
(standing in background)" . www.eeri.org.
4. "Earthquake shelter with bed support and
canopy" .
5. "Archived copy" . Archived from the
original on 2011-09-27. Retrieved
2009-06-18.
6. neesit (17 November 2007). "Shaking
Table Test on Conventional Wooden House
(1)" – via YouTube.
7. "Planning Division - City of Glendale, CA"
(PDF). www.ci.glendale.ca.us.
8. Kharrazi, M.H.K., 2005, "Rational Method

for Analysis and Design of Steel Plate
Walls," Ph.D. Dissertation, University of
British Columbia, Vancouver, Canada,
9. Reitherman, Robert (2012). Earthquakes
and Engineers: An International History .
Reston, VA: ASCE Press. pp. 356–357.
ISBN 9780784410714. Archived from the
original on 2012-07-26.
10. "Profits shaken at Tepco" . World
Nuclear News. 31 July 2007. Archived from
the original on 30 September 2007.
Retrieved 2007-08-01.
11. Asahi.com. Quake exposes nuke-plant
danger . July 18, 2007.
12. "Rensselaer Polytechnic Institute News
& Events" . 12 October 2007. Archived from
the original on 12 October 2007.
13. "Home - Standing Strong: 2009
NEESWood Capstone Test" . www.nsf.gov.
14. "A Survey on concepts of design and
executing of Superframe RC Earthquake
proof Structures" (2016) by Kiarash
Khodabakhshi ISBN 9783668208704
15. "Seismic Design of a Super Frame"
(PDF). Kajima Corporation. Retrieved
27 October 2017.
Retrieved from
"https://en.wikipedia.org/w/index.php?
title=Earthquake-
resistant_structures&oldid=862065317"
Last edited 2 days ago by Blorper234
Content is available under CC BY-SA 3.0 unless

otherwise noted.

Earthquake-Resistant Structures Are

Uploaded by

Copyright:

Available Formats

Earthquake-Resistant Structures Are

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Earthquake-Resistant Structures Are

Uploaded by

Copyright:

Available Formats

Earthquake-

Earthquake-resistant structures are

To combat earthquake destruction, the

Trends and projects

One Japanese construction company has

Concurrent shake-table testing of two or

Thus, two wooden houses built before

Close-up of abutment of seismically retroﬁtted

Seismically retroﬁtted Municipal Services Building in

Designed by architect Merrill W. Baird of

In October 2004 Architectural Resources

In 2008, the Municipal Services Building of

Steel plate walls system

The Ritz-Carlton/JW Marriott hotel building engaging

SPSW behavior is analogous to a vertical

The Ritz-Carlton/JW Marriott hotel

The Kashiwazaki-Kariwa Nuclear Power

On May 9, 2009, one unit (Unit 7) was

A destructive earthquake struck a lone,

The Miki shake at the Hyogo Earthquake

"NEESWood aims to develop a new

Superframe earthquake proof

The proposed system is composed of core

8. Kharrazi, M.H.K., 2005, "Rational Method

Content is available under CC BY-SA 3.0 unless

You might also like