Scribd Logo
Upload

Welcome to Scribd!

  • 555 views

    Yaskawa V 1000 Model Elevator Drive Program Setting

    Uploaded by

    Mohammed Sajid
    The document provides wiring details and programming settings for a Yaskawa V-1000 elevator drive. It lists the wire ferules and their connections to digital and analog inputs on the drive. It also includes a table with 17 drive parameter settings for functions like acceleration time, speeds, and terminal configurations. Finally, it includes a fault diagnostic diagram that maps potential problems to their adjustments in the drive parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Yaskawa V 1000 Model Elevator Drive Program Setting

    Uploaded by

    Mohammed Sajid
    555 views1 page
    The document provides wiring details and programming settings for a Yaskawa V-1000 elevator drive. It lists the wire ferules and their connections to digital and analog inputs on the drive. It also includes a table with 17 drive parameter settings for functions like acceleration time, speeds, and terminal configurations. Finally, it includes a fault diagnostic diagram that maps potential problems to their adjustments in the drive parameters.

    Original Description:

    Yaskava

    Original Title

    Yaskawa v 1000 Model Elevator Drive Program Setting

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides wiring details and programming settings for a Yaskawa V-1000 elevator drive. It lists the wire ferules and their connections to digital and analog inputs on the drive. It also includes a table with 17 drive parameter settings for functions like acceleration time, speeds, and terminal configurations. Finally, it includes a fault diagnostic diagram that maps potential problems to their adjustments in the drive parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    555 views1 page

    Yaskawa V 1000 Model Elevator Drive Program Setting

    Uploaded by

    Mohammed Sajid
    The document provides wiring details and programming settings for a Yaskawa V-1000 elevator drive. It lists the wire ferules and their connections to digital and analog inputs on the drive. It also includes a table with 17 drive parameter settings for functions like acceleration time, speeds, and terminal configurations. Finally, it includes a fault diagnostic diagram that maps potential problems to their adjustments in the drive parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Mabara Panel Drive Wiring Details

    Wire Ferules Yaskawa V-1000 Yaskawa V-1000


    Description
    Name Digital Input Analog Input
    M Over Load Trip MB MB
    M Over Load Trip MC MC
    S1 Slow Speed S6
    S2 Medium Speed S7
    S3 High Speed S5
    S4 ARD Speed S3
    RST Drive Trip Reset S4 S4
    UP Forward S1
    DN Reverse S2
    VCOM Common SC SC
    CM Common SC SC
    5V Analog Input + A2
    5V Analog Input - AC
    DBR DC Braking Resistor wiring B1,B2 B1,B2

    Yaskawa V-1000 Model Elevator Drive Program Setting


    S.No Parameter Name Parameter Digital Analog
    Setting Setting
    1 DC Injection Current b2-02 60% 60%
    2 Acceleration Time C1-01 3.00sec 03 Sec
    3 Deceleration C1-02 2.00sec 02 Sec
    4 S Curve @ Start C2-01 0.5
    5 S Curve @ Stop C2-04 0.5
    6 Normal Duty C6-01 0 00
    7 High Speed d1-02 40Hz
    8 Slow Speed d1-03 9Hz
    9 ARD Speed d1-05 5Hz
    10 Middle Or Inspection Speed d1-17 25Hz
    11 Maximum Output Frequency E1-04 50Hz 50Hz
    12 Base Frequency E1-06 50Hz 50Hz
    13 Motor Current E2-01 Motor Amps Motor Amps
    14 Terminal S3 Configuration/Speed Selection for ARD H1-03 5
    15 DBR Activation L3-04 3 3
    16 Gain Base Point H3-11 200%
    17 A2 Terminal Configuration H3-09 00

    Fault Diagnostic Diagram

    Problems Adjustments
    Leveling Changes C3-01=0.5
    Leveling Exceeds(Over Travel) C1-02=1.5
    C2-01=0
    C2-04=0
    Starting Jerk C2-01=1
    C2-02=0.5
    Stopping Jerk C2-03=0.5
    C2-04=1
    High Speed Adjustment d1-02 Only
    Slow Speed Adjustment d1-03 Only
    Middle Speed Adjustment d1-17 only
    Total Program Reset A1-03=2220
    L2-05 Only
    Low Voltage Proble
    (set the voltage)

    You might also like