Scribd
Upload
1K views9 pages

Cat C Series Using Service Mod

This document provides instructions for using service mode on Cat c series excavators and MHPU units. It describes the monitor panel display, controller functions like showing machine conditions and faults. It explains how to start the service mode by accessing preferences and entering a password. Directions are given for navigating menus using the monitor keys and exiting service mode. Displays and illustrations show the step-by-step process for selecting options and terminating the service functions.

Uploaded by

anuradha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views9 pages

Cat C Series Using Service Mod

This document provides instructions for using service mode on Cat c series excavators and MHPU units. It describes the monitor panel display, controller functions like showing machine conditions and faults. It explains how to start the service mode by accessing preferences and entering a password. Directions are given for navigating menus using the monitor keys and exiting service mode. Displays and illustrations show the step-by-step process for selecting options and terminating the service functions.

Uploaded by

anuradha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Cat c series using service mod

Using Service Mode... 312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C
Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump
Control - V2 #i01296534 Caterpillar

Show/hide table

Illustration 1g00684315

Monitor Panel

(1) Fuel gauge

(2) Engine coolanttemperature gauge

(3) Action lamp

(4) Engine speed dial indicator

(5) Hydraulic oil temperature gauge

(6) Message center

Show/hide table
Illustration 2g00685772

Monitor Panel

(7) "Up" key

(8) "Left" key

(9) "Right" key

(10) "Down" key

(11) "Cancel" key

(12) "Setting" key

(13) "Menu" key

(14) "OK" key

The information from the controller is displayed on the monitor. The following service programs
and functions are available from the controller:

The controller informs the monitor about the condition of the machine. Some examples are listed:
hydraulic oil temperature, engine coolanttemperature and fuel level.

The controller informs the monitor about any existing and/or past failures of the electronic control
system.

Various settings of the controller are performed.

Adjustment and testing of the electronic control system are performed.

Start-Up Of The Service Mode

Show/hide table

Illustration 3g00685772

Monitor Panel

(7) "Up" key


(8) "Left" key

(9) "Right" key

(10) "Down" key

(11) "Cancel" key

(12) "Setting" key

(13) "Menu" key

(14) "OK" key

The keys of the keypad are used to enter the service mode. The keys are used to change the
modes. Next, the appropriate key is pressed until the desired mode is displayed on the message
center.

"Up" key and "Down" key

The "up" key (7) is used and the "down" key (10) is used to scroll up and down through the items in
the message area.

"Left" key and "Right" key

The "left" key (8) is used and the "right" key (9) is used to scroll to the left and to the right through
the items in the message area.

"Setting" key

The "setting" key (12) is used to set the menu that is being displayed in the message area.

"Menu" key

The "menu" key (13) is used to access the main menu.

"Cancel" key

The "cancel" key (11) is used to cancel the immediate selection and the key is used to exit the
menu screen. The screen of normal operation will be displayed when the "cancel" key is pressed
during the menu screen.

"OK" key

The "OK" key (14) is used to select the item that is being highlighted in the message area.

Start-Up Of The Service Mode

Show/hide table
Illustration 4g00687262

The above screen should be displayed. Then, press the "menu" key (13).

Show/hide table

Illustration 5g00687282

The "down" key should be pressed. Highlight the "PREFERENCES" setting. Press the "OK" key.

Show/hide table
Illustration 6g00764425

The above screen should be displayed.

Show/hide table

Illustration 7g00687296

Show/hide table
Illustration 8g00687300

The keys for direction are used to input the password. Input the password and press the "OK" key.

Show/hide table

Illustration 9g00776428

Typical example of a display

The above screen should be displayed if the correct password is entered.

Show/hide table
Illustration 10g00687326

The above screen should be displayed if the password that was entered is not correct.

315C Start Mode

Start the service function by using: up key, down key, left key and right key

Exiting The Service Mode

Two methods are capable of terminating the service mode.

The service mode will be terminated 10 seconds after the start switch is turned to the OFF
position.

Show/hide table

Illustration 11g00687339

Highlight "SERVICE" in the first line of the display.

Show/hide table

Illustration 12g00687350

The "left" key and the "right" key is used to scroll through the display. The display should show
"EXIT" in the first line.

Show/hide table

Illustration 13g00687262

The service mode will be terminated and the display will return to the above display when the
"setting" key is pressed at the "exit" screen.

You can buy parts: .

$8.91
12-04-2019

CATERPILLAR 7E0744 V-BELT SINGLE NEW

7E0744 

$59.49

12-04-2019

Ca

You might also like