Scribd
Upload
78 views

II B. Tech II Semester Regular Examinations, November - 2018 Control Systems

This document contains questions that appear to be from an exam on control systems. It includes the following types of questions: 1. Comparing open-loop and closed-loop control systems, defining steady state error and deriving it, describing standard test signals, and explaining the effects of adding poles to transfer functions and what polar plots are. 2. Deriving a transfer function from a block diagram and developing a block diagram and transfer function for an armature controlled DC servo motor. 3. Deriving time domain specifications for a second order system with a unit step input and finding step, ramp and parabolic error coefficients and steady state errors for a given transfer function. 4. Explaining how to

Uploaded by

Subhakar Dasari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
78 views

II B. Tech II Semester Regular Examinations, November - 2018 Control Systems

This document contains questions that appear to be from an exam on control systems. It includes the following types of questions: 1. Comparing open-loop and closed-loop control systems, defining steady state error and deriving it, describing standard test signals, and explaining the effects of adding poles to transfer functions and what polar plots are. 2. Deriving a transfer function from a block diagram and developing a block diagram and transfer function for an armature controlled DC servo motor. 3. Deriving time domain specifications for a second order system with a unit step input and finding step, ramp and parabolic error coefficients and steady state errors for a given transfer function. 4. Explaining how to

Uploaded by

Subhakar Dasari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Code No: R1622042 R16 SET - 1

II B. Tech II Semester Regular Examinations, November - 2018


CONTROL SYSTEMS
(Com to ECE, EIE, ECC)
Time: 3 hours Max. Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)
2. Answer ALL the question in Part-A
3. Answer any FOUR Questions from Part-B
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PART –A
1. a) Compare the open-loop and closed-loop control systems. (2M)
b) What is steady state error and derive it (2M)
c) What are Standard test signals? (3M)
d) What are effects of adding poles to G(s) H(s) on the root loci? (2M)
e) What is polar plot? Draw the polar plot of G(s)=1/(3+ST) (3M)
f) Explain about obsevability? (2M)

PART -B
2. a) Using block diagram reduction techniques obtain the transfer function (7M)
C(s)/R(s) for the block diagram below.

b) Derive the transfer function and develop the block diagram of Armature (7M)
controlled DC servo motor.

3. a) Derive the time domain specifications of second order system with unit step (7M)
input.
b) Find the step, ramp and parabolic error coefficients and their corresponding (7M)
steady-state errors for unity feedback system having the following transfer
function

4. a) Explain the procedure to draw root locus of a given transfer function. (7M)
b) A feedback system has the open loop transfer function of : (7M)
G(s) = (K e-s ) / (s(s2+2s+4)). Find the limiting values of K for maintaining
stability.
1 of 2

|''|'||||''|'''|||'|
Code No: R1622042 R16 SET - 1

5. a) The characteristic equation of a linear control system is given below: (7M)


s2+4s+2+k=0. Using Nyquist Stability Criterion, determine the range of K for
the system to be stable.
b) Using Routh-Hurwitz criterion, determine the stability of the closed loop (7M)
system that has the following characteristic equation and also determine the
number of roots that are in the right half s-plane and on the imaginary axis:
S3+2s2+s+4=0.

6. a) Discuss the effect of Proportional controller and PD controller on performance (7M)


of a control system.
b) A unit feedback system has an open loop transfer function: (7M)
G(s) =K/s(s + 2) (0.3s +1). Design a phase lag compensator to meet the
0
following specifications: Velocity error constant = 10 .Phase margin ≥ 40 .

7. a) Discuss the concept of controllability and observability with an example (7M)


b) − 3 1 0 (7M)
Given the state equation X& = AX , Where A =  0 − 3 1 
 0 0 − 2
Determine the state transition matrix.

2 of 2

|''|'||||''|'''|||'|

You might also like