Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Air Drier Cassette, Replace

    Uploaded by

    ariwibowo
    This document provides instructions for replacing an air drier cassette. It lists the necessary special tools and cautions the user to follow the instructions carefully to avoid injury. The instructions include checking for debris in the inlet, cleaning the housing, applying grease to sealing surfaces, installing the new insert with an additional half turn after hand tightening, and noting that calibration may need to be performed after replacement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Air Drier Cassette, Replace

    Uploaded by

    ariwibowo
    30 views3 pages
    This document provides instructions for replacing an air drier cassette. It lists the necessary special tools and cautions the user to follow the instructions carefully to avoid injury. The instructions include checking for debris in the inlet, cleaning the housing, applying grease to sealing surfaces, installing the new insert with an additional half turn after hand tightening, and noting that calibration may need to be performed after replacement.

    Original Description:

    kok

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for replacing an air drier cassette. It lists the necessary special tools and cautions the user to follow the instructions carefully to avoid injury. The instructions include checking for debris in the inlet, cleaning the housing, applying grease to sealing surfaces, installing the new insert with an additional half turn after hand tightening, and noting that calibration may need to be performed after replacement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views3 pages

    Air Drier Cassette, Replace

    Uploaded by

    ariwibowo
    This document provides instructions for replacing an air drier cassette. It lists the necessary special tools and cautions the user to follow the instructions carefully to avoid injury. The instructions include checking for debris in the inlet, cleaning the housing, applying grease to sealing surfaces, installing the new insert with an additional half turn after hand tightening, and noting that calibration may need to be performed after replacement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    sb66797_node8 Page 1 of 3

    56166-3 Air drier cassette, replace


    Note: The same illustrations are reused for different variants. Some details may differ from the variant you are
    working on. The essential information in the illustrations is, however, always correct.

    Special tools: 9992976, 9998313

    Caution
    Follow the instructions carefully to avoid personal injury and damage to the product or equipment.

    Special tools: 9992976

    http://192.168.150.5:8800/impact3/application/staticdb/lang/enGB/sb66797_node8.xhtm 2017-05-01
    sb66797_node8 Page 2 of 3

    A = 9998313

    Special tools: 9998313

    http://192.168.150.5:8800/impact3/application/staticdb/lang/enGB/sb66797_node8.xhtm 2017-05-01
    sb66797_node8 Page 3 of 3

    Replace the O-ring, included in Kit.


    Check that the inlet in the middle from the drier insert to the drier housing is clean, otherwise the drier insert
    has failed or the compressor oil consumption is too high. Abnormal carbonization in the air drier requires an
    inspection of the cooling coil, 56176-2 Cooling coil, compressor, check and if necessary replacement.
    Clean the drier housing internally.
    Spread a thin layer of grease on the sealing surfaces and threads.

    5
    Install the new drier insert until it is against the housing. Tighten by hand another 1/2 turn.

    6
    Calibration shall be performed if the drier insert is replaced. Customers who do not wish to perform calibration
    when replacing the drier insert can turn the function off with Diagnostic Tool. This removes the possibility of
    reading off the remaining mileage until the next drier insert replacement.

    http://192.168.150.5:8800/impact3/application/staticdb/lang/enGB/sb66797_node8.xhtm 2017-05-01

    You might also like