Scribd Logo
Upload

Welcome to Scribd!

  • 81 views

    Beam, Column Design

    Uploaded by

    Dhanush M.R.
    The document provides design details for a beam and column. For the beam, it specifies design parameters, geometry, reinforcement areas for the top and bottom moments, and checks shear capacity. For the column, it specifies design parameters, geometry, loads from analysis, moments due to eccentricity and slenderness, uniaxial moment capacities, and checks the interaction equation is satisfied. Reinforcement areas for the column are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Beam, Column Design

    Uploaded by

    Dhanush M.R.
    81 views6 pages
    The document provides design details for a beam and column. For the beam, it specifies design parameters, geometry, reinforcement areas for the top and bottom moments, and checks shear capacity. For the column, it specifies design parameters, geometry, loads from analysis, moments due to eccentricity and slenderness, uniaxial moment capacities, and checks the interaction equation is satisfied. Reinforcement areas for the column are also provided.

    Original Description:

    beam and column design

    Original Title

    Beam,Column Design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides design details for a beam and column. For the beam, it specifies design parameters, geometry, reinforcement areas for the top and bottom moments, and checks shear capacity. For the column, it specifies design parameters, geometry, loads from analysis, moments due to eccentricity and slenderness, uniaxial moment capacities, and checks the interaction equation is satisfied. Reinforcement areas for the column are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    81 views6 pages

    Beam, Column Design

    Uploaded by

    Dhanush M.R.
    The document provides design details for a beam and column. For the beam, it specifies design parameters, geometry, reinforcement areas for the top and bottom moments, and checks shear capacity. For the column, it specifies design parameters, geometry, loads from analysis, moments due to eccentricity and slenderness, uniaxial moment capacities, and checks the interaction equation is satisfied. Reinforcement areas for the column are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 6

    DESIGN OF BEAM

    DESIGN PARAMETERS
    Grade of concrete = 20 N/mm2
    Grade of steel = 415 N/mm2
    Density of concrete = 25 N/mm3
    Modulus of Elasticity = 22360.68 N/mm2
    Xu max/d = 0.48
    A= 37.45894
    B= -149836
    Q= 2.75927

    DESIGN OF BEAM
    Width of beam, b = 200 mm
    Overall depth of beam = D = 450 mm
    Effective depth of beam, d = 415 mm
    Clear cover = 25 mm
    Dia of vertical stirrup = 8 mm
    Dia of main bar = 20 mm
    Factored shear = VU = 92.55 kN
    Factored moment at top = 71.854 kNm
    Factored moment at bottom = 35.564 kNm
    Torsional moment T = 8.235 kNm
    Mu lim = 95.04307 kNm

    AREA OF REINFORCEMENT FOR MAXIMUM TOP MOMENT


    Factored moment at top = 71.854 kNm
    Additional moment due to torsion = 15.74338 kNm
    Total moment = 87.59738 kNm SINGLY REINFORCED
    Depth of beam required dreq = 398.3603 mm
    Calculation of AST
    Ast actual = 711.0046 mm2 0.856632 %
    Ast minimum = 170 mm2 0.204819 %
    Ast maximum = 3600 mm2 4%
    Ast provided = 711.0046 mm2
    NO. of bars = 2#
    Pt Provided = 0.857 %

    AREA OF REINFORCEMENT FOR BOTTOM MOMENT


    Factored moment at bottom = 35.564 kNm
    Additional moment due to torsion = 15.74338 kNm
    Total moment = 51.30738 kNm SINGLY REINFORCED
    Depth of beam required dreq = 304.874 mm
    Calculation of AST
    Ast actual = 378 mm2
    Ast minimum = 170 mm2
    Ast maximum = 3600 mm2
    Ast provided = 378 mm2
    NO. of bars = 1#
    Pt Provided = 0.456 %

    CHECK FOR SHEAR


    Factored shear force Vu = 92.55 kN
    Additional shear due to torsion = 65.88 kN
    Equivalent shear Ve = 158.43 kN
    Nominal shear stress τve = 1.908795 N/mm2
    Maximum shear stress τc max = 2.8 SAFE
    Design shear strength of concrete τc = 0.584 PROVIDE SHEAR REINFORCEMENT
    Shear carried by concrete = 48.472 kN
    b1 = 114 mm
    d1 = 364 mm
    short dimension of stirrups x1 = 158 mm
    long dimension of stirurups y1 = 408 mm
    Permissible tensile stress σsv = 361.05 N/mm2
    C/S area of vertical stirrups = Asv = 100.544 mm2
    Spacing of stirrups, Sv = 97 mm
    Minimum spacing = 137 mm
    141.5 mm
    300 mm
    158 mm
    Spacing of stirrups provided = 137 mm
    DESIGN OF COLUMN
    DESIGN PARAMETERS
    Grade of concrete = 20 N/mm2
    Grade of steel = 415 N/mm2
    Density of concrete = 25 N/mm3
    Modulus of Elasticity = 22360.68 N/mm2

    DESIGN OF COLUMN 171


    REINFORCEMENT IS DISTRIBUED EQUALLY ON 2 SIDES
    Breadth of column b = 200 mm
    Width of column D = 600 mm
    Clear cover = 40 mm
    Dia of bar = 16 mm
    Effective cover = d' = 48 mm
    Depth of beam Dx = Dy = 450 mm
    Length of column l= 2000 mm
    Unsupported length of column lx = ly = 1550 mm
    Effective length ratio le/l = 1.2
    Effective length lex = ley = 1860 mm

    STAAD VALUES
    Factored axial load Pu = 513.98 kN
    Moment parallel to larger dimension Mux = 17.23 kNm X
    Moment parallel to shorter dimension Muy = 5.878 kNm

    Moments due to eccentricity


    Eccentricity along x direction, ex = 24 mm
    Eccentricity along y direction, ey = 20 mm
    Moment about x axis = Mex = 12.34 kNm
    Moment about y axis = Mey = 10.28 kNm

    MOMENTS DUE TO SLENDERNESS


    lex/D = 3.1 SHORT COLUMN
    ley/D = 9.3 SHORT COLUMN
    Moment about x axis = Max = 1.4818043 kNm
    Moment about y axis = May = 4.445413 kNm

    Pu (kN) Mx (kNm) My (kNm)


    Staad values 513.98 17.23 5.878
    Due to eccentricity 513.98 12.34 10.28
    Max(staad and eccentricity) 513.98 17.23 10.2796
    Due to slenderness 513.98 0 0
    Design values 513.98 17.23 10.2796
    Reinforcement percentage = 1.2 %
    p/fck = 0.06
    Puz / Ag = 12.5 CHART 63 SP16
    Puz = 1500 kN
    Uniaxial moment capacity about xx axis
    d'/D = 0.08 0.1
    Pu/fckbD = 0.214
    Mux1/fckbD2 = 0.14 CHART 32 SP16
    Mux1 = 201.6 kNm

    Uniaxial moment capacity about yy axis


    d'/D = 0.2
    Pu/fckbD = 0.214
    Muy1/fckbD2 = 0.13 CHART 34 SP16
    Muy1 = 62.4 kNm

    Pu/Puz = 0.3427
    Mux /Mux1 = 0.0855 0.9 CHART 64 SP16
    Muy /Muy1 = 0.1647
    αn = 0.3427
    (Mux /Mux1)^αn + (Muy /Muy1)^αn = 0.9696
    SAFE

    Area of steel = 1440 mm2


    NO. of bars = 7
    Z
    MAJOR AXIS

    X MINOR AXIS

    Z
    CHART 64 SP16

    You might also like