Scribd
Upload
76 views4 pages

Maintenance Information Mode: Systems Operation

Input Comp

Uploaded by

DANIEL VARGAS RODRIGUEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views4 pages

Maintenance Information Mode: Systems Operation

Input Comp

Uploaded by

DANIEL VARGAS RODRIGUEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Shutdown

Previous Screen

Product: EXCAVATOR
Model: 330D L EXCAVATOR B6H
Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY
C9 Engine

Systems Operation
320D, 321C, 323D, 324D, 325D, 328D, 330D, 345C, 365C, 385C, M325D and W345C
Excavators Monitoring System
Media Number -RENR8068-04 Publication Date -01/03/2006 Date Updated -29/03/2006

i02291080

Maintenance Information Mode


SMCS - 7490

The "MAINTENANCE INFO" menu allows the user to view the accumulated hours and the
recommended intervals for a list of system components.

Illustration 1 g01152977
(8) Up key

(9) Right key

(10) Home key

(11) Main menu key

(12) Left key

(13) Down key

(14) Cancel key or back key

(15) OK key

The "MAINTENANCE INFO" menu option is entered by selecting "MAINTENANCE INFO" from
the "MAIN MENU". Press the left key (12) or the right key (9) until "MAINTENANCE INFO" is
highlighted in order to select this option. Then press the "OK" key (15). Refer to Illustration 2.

Illustration 2 g01147976

Note: The "MAIN MENU" can be displayed from any screen by pressing the main menu key (11) .

The following screen will now be displayed.


Illustration 3 g01148194
(XXXX) The accumulated hours

(YYYY) The recommended maintenance intervals

From the "MAINTENANCE INFO" menu, use the appropriate up key (8) or down key (13) to scroll
through the listed information for the system components.

Refer to Table 1 for a list of system components that are available in the "MAINTENANCE INFO"
menu.

Table 1

MAINTENANCE INFORMATION LIST


345C 365C/385C
Display Detail

"COOLANT" X X Accumulated hour of coolant


"HYD OIL" X X Accumulated hour of hydraulic oil
"ENGINE OIL" X X Accumulated hour of engine oil
"SWING DRIVE OIL" X X Accumulated hour of swing drive oil
"FINAL DRIVE OIL" X X Accumulated hour of final drive oil
"WATER
X X Accumulated hour of water separator
SEPARATOR"
"ENGINE OIL FILTER"
X X Accumulated hour of engine oil filter

"FUEL FILTER" X X Accumulated hour of fuel filter


"PILOT OIL FILTER" X X Accumulated hour of pilot oil filter
"DRAIN OIL FILTER"
X X Accumulated hour of drain oil filter

"HYD OIL RET Accumulated hour of hydraulic oil return


X X
FILTER" filter
Accumulated hour of attachment hydraulic
"ATT FILTER" X X
oil filter
"ENGINE" X X Accumulated hour of engine
"PUMP" X X Accumulated hour of pump
"TRAVEL MOTOR" X X Accumulated hour of travel motor
"SWING MOTOR" X Accumulated hour of swing motor
"TOOL #01" X X Accumulated hour of tool 01
"TOOL #02" X X Accumulated hour of tool 02
"TOOL #03" X X Accumulated hour of tool 03
"TOOL #04" X X Accumulated hour of tool 04
"TOOL #05" X Accumulated hour of tool 05

Copyright 1993 - 2007 Caterpillar Inc. Mon Mar 5 14:00:22 EST 2007
All Rights Reserved.
Private Network For SIS Licensees.

You might also like