Scribd
Upload
35 views1 page

Designers: Ebuna, Noel Mecares, John Simon Pepito, Jimmylie: Analysis of One Way Slab

This document analyzes the design of a one-way slab with a span of 3 meters, a thickness of 200 mm, and reinforcement spaced at 275 mm consisting of 25 mm diameter bars with a yield strength of 276.5 MPa. It considers a 1000 mm wide strip of the slab and calculates the required area of reinforcement as 1784.99 mm2, the depth of the neutral axis as 162.5 mm, the factored shear of 20.6 kN/m, and the factored moment of 23.2 kN.m to resist the loads on the slab.

Uploaded by

Sidney Patrick Casul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
35 views1 page

Designers: Ebuna, Noel Mecares, John Simon Pepito, Jimmylie: Analysis of One Way Slab

This document analyzes the design of a one-way slab with a span of 3 meters, a thickness of 200 mm, and reinforcement spaced at 275 mm consisting of 25 mm diameter bars with a yield strength of 276.5 MPa. It considers a 1000 mm wide strip of the slab and calculates the required area of reinforcement as 1784.99 mm2, the depth of the neutral axis as 162.5 mm, the factored shear of 20.6 kN/m, and the factored moment of 23.2 kN.m to resist the loads on the slab.

Uploaded by

Sidney Patrick Casul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

ANALYSIS OF ONE WAY SLAB

Designers: Ebuna, Noel


Mecares, John Simon
Pepito, Jimmylie

Dimensions Units
t = 200 mm
pc = 25 mm
spaced at o.c = 275 mm
db = 25 mm
span = 3 m
Properies Units
fc' = 20.7 Mpa
fy = 276.5 Mpa
Wc = 24 kN/m3
DL = 1.2 kPa
LL = 8.4 kPa

Solution:
consider 1000 mm strip of slab
As = 1784.99 mm2
d = 162.5 mm
Wu = 20.6 kN/m
Mu = 23.2 kN.m
S = 275 mm

You might also like