Insualting Joint Brochure Rev.1 Final
Insualting Joint Brochure Rev.1 Final
Insualting Joint Brochure Rev.1 Final
(INCH) (DN) ΦB C D ΦB C D ΦB C D
(MM) (MM) (MM) (MM) (MM) (MM) (MM) (MM) (MM)
2" 60.3 122 100 350 121 95 350 121 105 350
4" 114.3 176 130 350 185 140 350 192 146 350
6” 168.3 240 137 350 248 161 350 240 158 350
8” 219.1 287 137 350 316 158 350 308 176 350
10” 273.1 356 140 500 356 185 500 372 185 500
12” 323.9 412 142 500 412 176 500 414 204 500
14” 355.6 457 171 500 455 200 500 455 232 500
16” 406.4 508 198 500 508 216 500 550 230 500
18” 457.2 550 174 500 562 220 500 584 240 500
20” 508 610 175 500 610 236 500 650 253 500
22” 559 672 202 500 670 252 500 710 285 500
24” 610 720 205 500 736 258 500 762 330 500
All dimensions are in mm. (Dimensions are subjected to change without notice)
*Inner Diameter & wall thickness of Insulating Joint Pups shall be match with Inner Diameter & Wall thickness of Line pipe.
VKVC Insulating Joint / Monolithic Coupling / Monolithic Insulating Joints are suitable for use with
Petrochemicals, Oil, Gas, LPG and Water services.
Page | 1
VKVC MONOLITHIC JOINTS
VKVC Insulating Joints available in different variety of connecting configurations with Bevel ends /
Flanged ends / Threaded ends.
TECHNICAL FEATURES
Available Sizes : 2” - 48” (Higher Sizes available on request)
Available Ratings : ANSI #150 – ANSI #1500 (Higher ratings available on request)
Design Code : ASME Sec. VIII Div.1 for Body & ASME B31.4/B31.8 for Pups
Hydrostatic Test : At 1.3 times Design Pressure minimum
Pneumatic Test : At 5 Bar minimum
End connections : Butt welds or Flanged End (RF / RTJ)
Insulation Resistance : 6 MOHM minimum
Dielectric Strength Test : At 5 KV Minimum (current leakage not > 5mA.) 50 Hz
Material Certification : EN 10204 3.1 / EN 10204 3.2
Coating : Epoxy Coating External / Internal (3LPE, Fusion bond Epoxy coating
available on request)
Holiday & Vacuum Test : Performed
MATERIALS
Pup Piece : API 5L / ASTM A 106 GR.B / ASTM A 333 GR.6 (LTCS)
Body : ASTM A 105 / ASTM A 694 / ASTM A 350 LF2 (LTCS)
Sealing : FLUOROELASTOMER / FKM / FFKM
Page | 2