29FC2RL PDF

Internal Use Only
website:http://biz.LGservice.com
COLOR TV
SERVICE MANUAL
CHASSIS : CW62C
MODEL : 29FC2RL
MODEL : 29FC2RL-Z1
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
Sep, 2007
P/NO : MFL37794432 Printed in China
CONTENTS
Contents ...................................................................................................................2
Safety Precautions..............................................................................................3
Control Descriptions..........................................................................................4
Specifications........................................................................................................7
Adjustment Instructions .................................................................................8
Trouble Shooting ................................................................................................16
Printed circuit board........................................................................................20
Block Diagram .....................................................................................................20
Exploded View....................................................................................................24
Exploded View Parts List .............................................................................25
Replacement Parts List .................................................................................26
SVC. Sheet..................................................................................................................
Copyright©2007 LG Electronics.Inc. All right reserved. -2- LGE Internal Use Only
Only for training and service purposes.
SAFETY PRECAUTIONS
IMPORTANT SAFETY NOTICE

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in
the Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to
prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance Before returning the receiver to the customer,
An isolation Transformer should always be used during always perform an AC leakage current check on the exposed
the servicing of a receiver whose chassis is not isolated from metallic parts of the cabinet, such as antennas, terminals, etc.,
the AC power line. Use a transformer of adequate power rating to be sure the set is safe to operate without damage of
as this protects the technician from accidents resulting in electrical shock.
personal injury from electrical shocks.
Leakage Current Cold Check(Antenna Cold Check)
It will also protect the receiver and it's components from being With the instrument AC plug removed from AC source,
damaged by accidental shorts of the circuitry that may be connect an electrical jumper across the two AC plug prongs.
inadvertently introduced during the service operation. Place the AC switch in the on position, connect one lead of
ohm-meter to the AC plug prongs tied together and touch other
If any fuse (or Fusible Resistor) in this TV receiver is blown, ohm-meter lead in turn to each exposed metallic parts such as
replace it with the specified. antenna terminals, phone jacks, etc.
If the exposed metallic part has a return path to the chassis, the
When replacing a high wattage resistor (Oxide Metal Film measured resistance should be between 1MΩ and 5.2MΩ.
Resistor, over 1W), keep the resistor 10mm away from PCB. When the exposed metal has no return path to the chassis the
reading must be infinite.
Keep wires away from high voltage or high temperature parts. An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube. Leakage Current Hot Check (See below Figure)
Do not lift the Picture tube by it's Neck. Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
X-RAY Radiation Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
Warning: and the exposed metallic parts.
Measure the AC voltage across the resistor using AC
The source of X-RAY RADIATION in this TV receiver is the voltmeter with 1000 ohms/volt or more sensitivity.
High Voltage Section and the Picture Tube. Reverse plug the AC cord into the AC outlet and repeat AC
For continued X-RAY RADIATION protection, the voltage measurements for each exposed metallic part. Any
replacement tube must be the same type tube as specified in voltage measured must not exceed 0.75 volt RMS which is
the Replacement Parts List. corresponds to 0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
To determine the presence of high voltage, use an accurate
high impedance HV meter. Leakage Current Hot Check circuit
Adjust brightness, color, contrast controls to minimum. AC Volt-meter

Measure the high voltage.
The meter reading should indicate
23.5 ± 1.5KV: 14-19 inch, 26 ± 1.5KV: 19-21 inch,
29.0 ± 1.5KV: 25-29 inch, 30.0 ± 1.5KV: 32 inch
If the meter indication is out of tolerance, immediate service Good Earth Ground
and correction is required to prevent the possibility of such as WATER PIPE,
CONDUIT etc.
premature component failure. To Instrument’s 0.15uF
exposed
METALLIC PARTS
1.5 Kohm/10W
DESCRIPTION OF CONTROLS
All the functions can be controlled with the remote control handset.
1 Some functions can also be adjusted with the buttons on the front
panel of the set.
10 11
13
14
Remote control handset
Before you use the remote control handset, please install the bat-
1 2 3 teries. See the next page.
2 4 5 6 1. POWER
switches the set on from standby or off to standby.
7 8 9
2. NUMBER BUTTONS
3 0 8 Switches the set on from standby or directly select a number.
PR
3. MENU
selects a menu.
4 VOL OK VOL 4. D / E (Programme Up/Down)

selects a programme or a menu item.
switches the set on from standby.
PR scans programmes automatically.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
5 OK
6 accepts your selection or displays the current mode.
7
5. TELETEXT BUTTONS (option)
9 These buttons are used for teletext.
12 For further details, see the ‘Teletext’ section.
(With TELETEXT / PIP)
6. SLEEP
sets the sleep timer.
0
7. PIP BUTTONS (option)
PIP
PR
switches the sub picture on or off.
PR +/-
VOL OK VOL
selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
PR
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
UPDATE/ HOLD/
STILL
5 freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
(With TELETEXT / Without PIP)
8. FAVOURITE
selects a favorite programme. 1
10 11
9. EYE/ (option)
*
switches the eye function on or off. Q.VIEW LIST
13
14
10. MUTE
switches the sound on or off. 1 2 3
11. TV/AV 2 4 5 6
selects TV or AV mode.
switches the set on from standby. 7 8 9
exits the Teletext mode.
3 0 8
12. I/II/
*
selects the language during dual language broadcast.
PR
selects the sound output (option).
13. Q.VIEW (or YELLOW) 4 VOL OK VOL

returns to the previously viewed programme.
14. LIST (or BLUE) PR

displays the programme table. 12
6 9
: No function
*
COLOURED BUTTONS : These buttons are used for teletext (only
(Without TELETEXT / PIP)
TELETEXT models) or programme edit.
1 2 3
4 5 6
7 8 9
PR
VOL OK VOL
PR
(With PIP / Without TELETEXT)
@@@@@@@@e?@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e
@@@@@@@@e?@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@
@@@@@@@@
@@h? @@
@@h? @@
@@h? @@
@@h? @@
@@h? @@
@@h? @@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@
@@ @@
@@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@
@@g ?@@
@@g ?@@
@@g ?@@
@@g ?@@
@@g ?@@
@@g ?@@
@@@@@@@@
@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ ?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ ?@@@@@@@@
1 2 5 3 4
Side panel
AV IN3
VIDEO
6
L/MONO AUDIO R
1. MAIN POWER (ON/OFF)

switches the set on or off.
2. POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby mode.
dims when the set is switched on.
3. MENU
selects a menu.
4. OK
accepts your selection or displays the current mode.
F / G (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
5. REMOTE CONTROL SENSOR
Note : Only use the supplied remote control handset. (When you use others, they will not be able
to function.)
6. AUDIO/VIDEO IN SOCKETS (AV IN3)
Connect the audio/video out sockets of external equipment to these sockets.
7. EYE (option)
adjusts picture according to the surrounding conditions.
SPECIFICATIONS
Note : Specification and others are subject to change without notice for improvement.
V Scope
This specification can be applied to all the television related to Market Place Band Standard input Voltage Remark
CW62C Chassis. Miesast/Africa LG 110 ~240 V 50/60Hz Initial
V Test and Inspection Method
EU/CIS LG 230V 50Hz
1) Capability: It follows the TV QC Standard of LGE.
2) Standards of Etc. requirement
- Safety: IEC60065 2.4 Follow each drawing or spec for spec and performance of
-EMC : CE standard(EN55020,EN55013) parts, based upon P/N of B.O.M.
V Test Condition 2.5 Warm up TV set for more than 20min. before the
Conduct the test as mentioned below. measurement (If no problem in capability,this allow omitted)
2.1 Temperature : 25 ± 5°C ( CST 40±5°C)
2.2 Relative Humidity : 65 ± 10%
2.3 Power Voltage :
V General Specification
No Item Specification Remark
1 Receiving System 1) NTSC M Korea,Japan,Taiwan,North
2) NTSC M/ PAL M/N America,Middle South American
1) PAL,SECAM BG EU /Non EU MODEL
2) PAL/SECAM DK
3) PAL-I/I
4) NTSC M
5) NTSC 4.43(AV)
6) SECAM L/L OPTION
7) NTSC M/PAL M/N
2 Receiving Channel 1) VHF : 02~13 Korea,Taiwan,North America.
UHF : 14~69 Middle south American
CATV : 02~125
2) VHF/UHF : 1~62CH
CATV : C13~C38CH Japan
TOTAL 88CH
3) VHF : E2 ~ E12 1)EU/Non EU Model
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21 ~ S41
4) VHF : 02 ~ 13 2)NTSC-M
UHF : 14 ~69 (Multi-model NTSC-M)
CATV : 02 ~ 71
3 Input Voltage AC 220V, 60Hz Korea
AC 100 ~ 240V, 50/60Hz Middle south America
AC 120V, 60Hz North America
AC 100V, 50/60Hz Japan
AC 110V, 60Hz Taiwan
AC 110 ~ 240 V/50Hz, 60Hz NON-EU
AC 230 V 50/60 Hz EU
4 Market Korea, Japan, Taiwan, North
America. Middle South
American ,Filipine, China,
Middle Asia, Asia, EU, CIS
Picture inch FLAT 29”
5 Tuning System FS NTSC MODEL
FVS 100 program PAL MODEL
200 PR(W/O TXT )
6 Operating Environment 1)Temp : 0 ~ 45 deg

2)Humidity : under 85 %
7 Storage Environment 1)Temp : -20 ~ 60 deg
2)Humidity : under 85 %
ADJUSTMENT INSTRUCTIONS
1. Application Object
This specification can be applied to all the television related to As preparatory operations before
CPT Assembly
CW62C Chassis assembling CPT, wind cotton Tape for
protecting to CPT NECK and DY, CPT
2. Notes connection parts. At this moment, end
(1) Because this is a cold chassis, it is not necessary to use of tape should be over-lapped and
an isolation transformer. However,operating it using a wound in direct route to the NECK.
transformer between the power supply line and chassis
input to prevent electric shock and to protect the test Integrate DY and Fix the Magnet to the position as
instrument. Magnet into CPT shown picture below. Be careful not to
(2)All adjustments must be done in correct sequence. make CPT neck shadow while
However, for better productivity, it can be changed in a pre- HEAT RUN adjusting DY.
permitted range.
(3) Environment conditions: If not specified, it must be done in Degaussing
Convergence Magnet 6Pole 4 2
following conditions.
1) Temperature: 25±5°C STC Pre-Adjustment
2) Humidity : 65±10%
(4) AC Voltage 220V ±10% Purity adjustment
15 ~ 20mm
(5) If not specified, the receiver must be operated for more

than 20 minutes prior to the adjustment. DY Fixing It needs minimum 15 minutes for
(6) Signal: Received the standard color signal. (65dB±1dBuV) heat run under "standard" picture
PAL/SECAM: LG standard signal means the digital SCREEN Voltage adj. condition.
pattern PAL_EU 05CH
W/B Fix DY FIXED Torque 9~11 kg f.cm
3. Adjust Item
3.1.1. Preparation for Adjustment. FOCUS adjustment
- Receive PAL-B/G 07ch.(Cross hatch pattern) likes fig.1.
- Select the Picture mode to Standard or clear. STC adujustment
3.1.2. Adjustment.1
Adjust FOCUS VOLUME(the top volume of FBT) ¨and DYC adujustment
make the FOCUS of vertical line on the quarter of
Fig.2 Adjustment Sequence
screen(red area in fig.1) achieve the best state.
3.2.1. Purity adjustment

A B
a. Do degauss CPT and Cabinet
b. Receive Red Raster signal. (Gumi PG50ch.)
c. Unfasten fixing Screw of DY, close DY to CPT Funnel DY
as possible as you can.
d. Make R-Land be centered as cross Purity Magnet
That time,4th 6th magnet should keep free gauss status.
e. Make uniform RED Raster as moving DY,
Check there is purity problem or not on R/G/B, white
Raster.Then, Fix screw of DY.
(At this time, be careful about inclination and DY should be
fixed keeping horizontality)
f. Check the TV in direction of EAST, WEST, SOUTH,
NORTH,. Adjust with supporting MAGNET when
<Fig 1. Cross-Hatch Pattern(NTSC:US 09CH, PAL:E-7 CH) adjustment is not operated ..
3.2. Purity and Convergence adjustment 3.2.2. Adjustment for Convergence
Following direction is a case using of None-ITC CPT for CPT This adjustment should be operated at the best condition of
manufacture factory. FOCUS after finishing the PURITY adjustment.
This adjustment should be done as below direction. 1) BACK RASTER receives black CROSS HATCH signal.
2) Adjust Brightness so that there are 9-12 dots.
3) Widen two tabs of 4pole Magnet with equal angles and
accord red, blue vertical lines at the center of screen.
4) With keeping angle of "c. clause", rotate tab and accord
red/blue, green vertical lines at the center of screen.
5) Widen two tabs of 6pole Magnet with equal angles and 2. White balance IIC Parameter (Address)
accord red, blue vertical lines at the center of screen.
6) With keeping angle of "e. clause", repeat the adjustment Program Win31_wb TWB Win31_wb TWB Speed Delay
from c to e keeping in mind the movement of red, blue,
Vcd Slave 8A Eeprom_Slave A0 1 30
green when the horizontal lines are twisted.
7) Move DY up, down, left, right and make the convergence to
be optimal condition and stick rubber B(R)_Amp B(R)_Cut G_Amp G_Cut
wedge to CPT so that the DY not to move.
Program Win31_wb TWB Win31_wb TWB Win31_wb TWB Win31_wb TWB
3.3 SCREEN & WHITE BALANCE Adjusting Sub Add 20 17 21 18
Start Bit 5 5 5 5
3.3.1. Manual Adjustment Method (use remoncon
Stop Bit 0 0 0 0
for adjusting)
1) Adjust in on RF signal condition or no signal condition. Offset 0 0 0 0
2) Press ADJ KEY of SVC T/X and select 2.SCREEN ADJ key Polarity 1 1 0 0
for adjustment and generate horizontal line.
EP_Rom_S 36 33 37 34
Turn the Screen Volume so that horizontal line not to be
shown and then change oppositely to finish the adjustment
SPEED/PLUS 2 2 2 2
at the showing place.
3.3.2. WHITE BALANCE Manual Adjustment.( INSTART ->
SERVICE1) 3.Color coordinate
1) TV set receive 100% White Pattern signal
2) In the state of default setting,adjust BLO-R(R CUT), BLO- Mode
G(G CUT)
High
3) In default setting Data BG(B-DRIVE) is 32,adjust RG(R-
DRIVE), GG(G-DRIVE) Light
X,Y coordinate satisfy color coordinate below,adjust HIGH Low
LIGHT(35FL)°
Light
Adjust repeatedly until HIGH LIGHT, LOW LIGHT match.

W/B setting default data refers to W/B TABLE based on
different MODEL.
<Table 1> WHITE BALANCE Color Coordinate 3.4 Deflection Setting Data Adjustment
3.4.1. Adjustment Preparation
KOREA Middle/South Philippines (1) TV set receive Digital pattern (PAL: E5ch.)
Item EU N-EU America
/Taiwan (2) Deflection setting data adjustment can be done only with
X 288 268 267 282 266 remote control.
(3) Press the “INSTART” Key on the factory remote control
Y 295 273 276 288 282
continuously to enter Deflection Adjustment mode.
Color 9000 1300 1300 10000 13000 (4) Press the CHD ,E Key to select adjustment item.
Temperature degree degree degree degree degree (5) Press the F ,G Key to change the data.
3.4.2. Adjustment
<Table 2> WHITE BALANCE default setting data 1.Deflection Setting Data Adjustment,adjust in N50Hz (PAL) mode
firstly,
default setting data
Item Range remarks In USB applied models,PAL Mullti regions,N60Hz(Digtal Pattern)
PAL
needs defleetion data adjustment.(07.09.11)
LOW BLO-R(R CUT) 0 ~ 63 32
then separately adjust N60Hz(NTSC), Z60Hz, N50Hz, W50Hz,
LIGHT BLO-G(G CUT) 0 ~ 63 32 Z50Hz.(Model with ARC function)
HIGH RG(R DRIVE) 0 ~ 63 32 (In N60Hz adjustment, data more than N60Hz can auto transfer
accordingly to N60Hz compensate value, please pay attention to it.)
LIGHT GG(G DRIVE) 0 ~ 63 32
2. Korea Model adjust only in N60Hz.
BG (B DRIVE) 0 ~ 63 32 fixed 3. Middle/south America Model first adjust in N60HZ,then in N50(PAL-N ).
4. After finishing deflection setting data adjustment, press ENTER
<Table 3>W/B auto adjust machine setting Table KEY,then save it and escape adjustment Mode.
Deflection Setting ITEM
1. IC
Name Maker NOTE 1. V SLOPE
CPT center line aim at black background !
VCD IC
2. V SHIFT (VS)
EP_ROM Keep accord with vertical center line of received picture and
CPT
Algorithm 3. V LINEAR (VL)
Adjust the top & bottom size of inner circle to be equal on PAL
0 0 0 0
E05 CH.
4. V AMPLIT (V AMPITUDE) 10. H BOW
Adjust until distortion scope of the edge part in the top and the
undersurface of the picture are the same.
Adjusting Point
11. H PARALL (ANGLE)
In angle adjustment, adjust until inclination of center vertical line
should be vertical precisely.
12. SCORRECT (S CORRECTION)

Adjust so that the lattice scopes of top, center, bottom of received
PAL signal: Adjust upper and lower part of circle from the effective pattern are the same.
screen of the CPT to be distance of 6~7mm . Use the default setting data (Initial data) of CPT owing to using DY
data of CPT.
5. H SHIFT (HS)
Adjust the vertical center line of a digital circle pattern is in accord 13. V SCROLL
with geometric vertical center of the CPT. Keep accord with the geometry vertical center line of received
picture and the vertical center of CPT.
6. EW WIDTH (EW)
Adjust outer line of the left/right outer lattice to be united with 14. V ZOOM
effective boundary surface of CPT. VERTICAL ZOOM
Adjust of [Fig 4] 0~25% scope on external lattice from PAL 15. WBR
adjustment. 16. WBF
Actual picture size 17. PIP_ H (PIP H Position) Adjustment* - option
In PAL Channel (E5 CH), when adjust PIP_H position, it will

automatic convert into Double Window Mode.
PIP H Position adjust stand-by picture state, use VOL+, - KEY to
move H-Position or V-Position of sub-picture.
When PIP picture and main picture connect, press VOL+ KEY to
adjust.
[fig.4] PAL Digital Pattern (EU05CH)
7. EW PARAB (EW PARABOLA)

Adjust so that middle portion of the outer most left and
right vertical line looks like parallel with vertical lines of the
CPT.
8. EW TRAPE (EW TRAPEZOID)

Keep accord with the top and the undersurface horizontal scope.
(When picture distorts£¨adjust until it is the square.) [Fig.5] PIP H Position Adjust Picture
9. EW UPCOR & EW LOCORR

Adjust so that corner vertical line of upper-left ,upper-right, lower- 3.5 Deflection setting default
left and lower-right to be optimization.
-PAL
CRNU6
CRNU [Table 4] Deflection setting default based on different model
(SERVICE 2)
EP
CRNL
CRNL6
[Fig.5] Cross-Hatch Pattern (PAL:E-7 CH)
Copyright©2007 LG Electronics.Inc. All right reserved. - 10 - LGE Internal Use Only

Adjust 29"S-SLIM 29"FLAT 29" Normal 25" FLAT
Adjust Item Adjust or not
explanation TS Sus TS-AK Invar AK IRICO 1.3R AK
V SLOPE Vertical slope 16 14 15 12 17 10 24 15 Yes

V SHIFT Vertical shift 42 46 46 41 38 39 15 51 Yes
V LINEAR Vertical linearity 36 40 40 35 32 36 41 32 Yes
V AMPLIT Vertical amplitude 26 35 30 29 32 48 15 37 Yes
H-SHIFT Horizontal shift 30 26 26 29 24 30 30 28 Yes
EW WIDTH EW width 38 25 36 22 17 32 30 19 Yes
EW PARAB Parabola adj 50 44 45 35 30 35 36 28 Yes
EW TRAPE Trapezoid adj 16 34 15 21 25 10 15 15 Yes
EW UPCOR Lower corner adj 46 54 45 45 35 42 47 42 Yes
EW LOCOR Lower corner adj 58 48 59 53 35 59 59 43 Yes
H BOW Bow 34 32 36 33 32 32 33 35 Yes
H PARALL Horizontal parallelogram 31 25 36 35 32 32 34 31 Yes
SCORRECT S correction 38 38 32 30 30 30 32 40 Adjust if necessary
V SCROLL Vertical shift 21 21 21 21 21 21 3 21 Adjust if necessary
V ZOOM Vertical zoom 25 25 25 25 25 25 25 25 Adjust if necessary
WBR Timing of Wide Blanking 2 2 7 2 2 2 2 5 Adjust if necessary
WBF Timing of Wide Blanking 2 2 2 2 2 2 2 0 Adjust if necessary
V SYNSLI Vertical slicing level 0 0 0 0 0 0 0 0 Adjust if necessary
OVRVOLIN Over voltage input mode 0 0 0 0 0 0 0 0 Adjust if necessary
V GUARD Vertical guard mode 0 0 1 0 1 1 1 1 Adjust if necessary
Warning: First adjust in PAL 50HZ, and then adjust in NTSC 60HZ, but it needs confirm
adjustment state again in NTSC System. Adjust if necessary.
3.6 SVC DEFAULT DATA (DATA below is supervised by EEPROM MASTER.)
-PAL
[Table 5] SERVICE 1 [Table 6] SERVICE 3
Adjust
Adjust explanation N-EU EU Remarks
29"N 25" Item
Adjust Adjust 29"S-SLIM 29"FLAT ormal FLAT
Item OVMADAPT OVER MODULATION 1 1
explanation
TS Sus TS- Invar AK IRICO 1.3R AK
OVMTHR OVER MODULATION THRESHOLD
AK 1 1
AGC AGC take over 25 25 25 25 25 25 25 25 ADC LEV ADC LEVEL (-16 ~ 15) – ADCLEV 16 16
RG Red Gain 32 32 32 32 32 32 32 32 DEC LEV DEC LEVEL (-16 ~ 15) – DECLEV 17 17 FM pre-scaler (Stereo L/R)
GG Green Gain 32 32 32 32 32 32 32 32 MONO LEV MONO LEVEL (-16 ~ 15) – MONOLEV 18 18 FM pre-scaler (Mono)
BG Blue Gain 32 32 32 32 32 32 32 32 NICAMLEV NICAM LEVEL (-16 ~ 15) – NICLEV 22 22 NICAM pre-scaler
BLO-R Black level offset Red 32 32 32 32 32 32 32 32 FILTBW FILTER BANDWIDTH 0 0
BLO-G Black level offset Green 32 32 32 32 32 32 32 32 BAMA FC BASS MANAGEMENT FREQUENCY CHAR. 8 8
CDL Cathode Drive Level 5 11 8 5 5 5 8 5 AUX3 VOL AUX3 VOL (SCART1 RF SOUND OUT) 84 89 Scart pre-scaler
L-DLY Luminance delay time 13 13 13 13 13 13 13 13 FMWINDOW FM WINDOW FILTER (FMWS) 1 1
RGB-BRI OSD/TEXT BRIGHTNESS 25 25 20 25 25 25 25 25 BOOSTVAL 0 0
MAX VOL MAX VOLUME 100 100
DCXO VAL DCXO 50 50
DCXOA DCXO 0 0
TEXT-V TEXT POSITION – VERTICAL 40 40
TEXT-H TEXT POSITION – HORIZONTAL 5 5
DBB GAIN Dynamic Bass Booster 8 8 For 29FU3 Tool
DBB FRQ Dynamic Bass Booster Frequency 2 2 For DBB Model

[Table 7] SERVICE 4 [Table 8] OPTION 1,2,3,4,5
29"S-SLIM 29" Flat 29" Flat AK
Adjust Adjust ITEM Description
Item explanation TS Sus
TS-
AK
Invar AK 1.3R OPTION1 INCH 0: 29” S/Slim, 1: 28” Flat, 2: 29” Flat, 3: 25” Flat
SYSTEM BG/DK/I/M, BG/DK/I/L

WS WHITE STRETCH 1 1 1 1 1 1
1 1 1 1 1 200PR W/O TXT=>100PR, W/TXT=>200PR
BKS BLACK STRETCH 1
BSD BLACK STRATCH DEPTH 0 0 0 0 0 0 TOP 0: FLOF, 1: TOP=>Germany, Swiss, Austria, Italy
DSK DYNAMIC SKIN CONTROL 1 1 1 1 1 1 ACMS 0: OFF, 1:ON=> Auto channel memory system
COR VIDEO DEPENDENT CORING 2 2 2 2 2 2 CH-AU 0: Other Area, 1: China & Australia Frequency table
PF PEAKING FREQUENCY DELAY 0 0 0 0 0 0 SCREEN 0: Other CPT, 1: TS-AK CPT
RPO RATION POSITIVE/NEGATIVE PEAK 3 3 3 3 3 3 OPTION2 SOUND 0: RF stereo, 1:AV stereo, 2: Mono, 3: Mono Dual
RPA RATION PRE/AFTER SHOOT 2 2 2 2 2 2 PIP 0: No PIP, 1: 1 Tuner PIP, 2: 2 Tuner PIP, 3: Reserved
PWLDAC PWLDAC PEAK WHITE LIMITER DAC 8 2 5 8 3 8
VOL CURVE(volume curve) 0: EU=>Low curve, 1: NON-EU=>High curve
IFOFF IF DEMODULATIOR 37 37 37 37 37 37
A2 STEREO Nicam check & FM stereo / Dual
CHSE CHROMA SENSITIVITY 0 0 0 0 0 0
I/II SAVE 0: OFF, 1:ON=>Dual sound setting save on
ACL AUTO COLOR LIMITING 1 1 1 1 1 1
AV3 0: W/O SIDE A/V, 1: W/ SIDE A/V
CLPDEL50 PAL CLAMPING DELAY 20 20 20 20 20 20
OPTION3 SCART 0: No SCART, 1: 1 SCART, 2: 2 SCART, 3: Reserved
CLPDEL60 NTSC CLAMPING DELAY 2 2 2 2 2 2
3 3 3 3 3 DVD 0: W/O DVD, 1: W/ DVD
CLPLEN CLAMPING PULSE LENGTH 3
CLMPID CLAMPING DURATION 3 3 3 3 3 3 XWAVE 0: W/O XWAVE, 1: W/ XWAVE
EYE 0: W/O EVE, 1: W/ EYE
4KEY 0: 6 KEY, 1: 4 KEY
TILT 0: W/O TILT, 1: W/ TILT
DEGUASS Degaussing option
OPTION4 OSD LANG Refer to the next page(table.9)
TXT LANG Refer to the next page(table.9)
USB (Southeast Asia) 0: W/O USB Model, 1: w/ USB Model (07.08.08)
CW62C CW62C Only 1 => Vol Curve/S Mute timing/Component
Compensation Value Change
OPTION5 REMOCON Not available
HOTEL 0: Normal, 1: HOTEL option
TURBOSCH 0: EU(RZ)=> W/O Turbo search,

1: NON-EU(RT)=>W/ Turbo search
TURBOP/S 0: W/O Turbo picture &sound, 1: W/ Turbo picture &sound
QUARRAN (Arabia) 0: W/O Quarran , 1: W/ Quarran
COUNTRY ( EU) 0: NON MA Menu, 1: MA Menu
LGEINVOL(Southeast Asia) 0: Others, 1: LGEIN Volume

BLUEBACK (EU/ Southeast Asia) 0: Blue back off, 1: Blue back on
TEXT 0: W/O TEXT, 1: W/ TEXT
TS-AK 0: NON-TS-AK CPT, 1: TS/AK CPT
OPTION DATA in BOM ,for example:
LEVEL PART NO. SPECIFICATION DESCRIPTION

1. 3141VMN382A MAIN CHASSIS ASSY [112,68,164,32,8]

<Table 9> OSD & TEXT LANGUAGES
0 Southeast Asia TEXT 0 ENGLISH
1 SOUTHEAST ASIA 0 ENGLISH
1 INDONESIAN
2 MALAY
3 VIETNAMESE
4 THAI
2 RESERVED
3 RESERVED
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
1 EAST EU CYRILLIC TEXT 0 ENGLISH
1 EAST EU ALL 0 ENGLISH
1 GERMAN
2 RUMANIAN
3 POLISH
4 HUNGARIAN
5 CZECH
6 RUSSIAN
7 BULGARIAN
2 ENGLISH RUSSIAN 0 ENGLISH
1 RUSSIAN
3 RESERVED
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
2 WEST EU GREEK TEXT 0 ENGLISH
1 EU 7EA 0 ENGLISH
1 GERMAN
2 FRENCH
3 ITALIAN
4 SPANISH
5 NETHERLANDISH
6 PORTUGUESE
2 WEST EU ALL 0 ENGLISH
1 GERMAN
2 FRENCH
3 ITALIAN
4 SPANISH
5 NETHERLANDISH
6 SWEDISH
7 NORWEGIAN
8 DANISH
9 FINNISH
10 PORTUGUESE
11 GREEK
3 ENIGLISH GREEK 0 ENGLISH
1 GREEK
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED

3 ARAB TEXT 0 ENGLISH
1 ARABIC 0 ENGLISH
1 FRENCH
2 ARAB
3 URDU
2 FARSI 0 ENGLISH
1 FRENCH
2 ARAB
3 PARSI
3 ARAB ALL 0 ENGLISH
1 FRENCH
2 ARAB
3 URDU
4 PARSI
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
4 FARSI TEXT Same as ARAB TEXT
5 Southeast Asia W/O TEXT Same as Southeast Asia TEXT
6 WEST EU W/O TEXT Same as WESTEU GREEK TEXT
7 EAST EU W/O TEXT Same as EASTEU CYRILLIC TEXT
8 ARAB W/O TEXT Same as ARAB TEXT
9 CHINA, INDIA W/O TEXT 0 ENGLISH 0 ENGLISH
1 CHINA 1 CHINESE
0 ENGLISH
2 HINDI 1 HINDI
3 RESERVED
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
10 Korea/Middle south America
11 Taiwan
3.7 FM TX MODEL * (option) 4. Shipping condition.

FM TRANSMITTER MODEL send/receive state checking 4.1. Shipping Mode
method (FM Receiver Model)
FM TRANSMITTER Performance checking process after Do push IN-STOP KEY using by R/C and it, will be done
antenna lay out. shipping mode. 4.2. Shipping condition
FM TRNASMITTER Function: send TV sound (MONITOR
Output) to FM by receiver in MIC 4.2. Shipping condition
BOARD, and achieve sound signal by special remocon and
ear-phone. [Table 10]
Remarks: Even if don’t use special remocon, ordinate FM
receiver equipment can receive sound signal with receive
frequency of OSD setting. .
Check in LG 5, 25 channel or channel with sound output.
Choose receive frequency of MENU OSD.
MENU => SOUND => TRANSMITTER => Frequency
(87.7MHz)
Receive by special remocon or other FM receiver,and the
frequency is 87.7MHz.
Check output sound signal of MAIN SPEAKER in ear-phone
or other receive equipment.

No. ITEM Shipping condition Remarks
1 Power OFF
2 Input TV
3 MEMORY CH. MEMORY refer to
CHANNEL manage benchmark
4 SOUND 30 STEPS
5 MUTE OFF
6 PSM DYNAMIC
7 XD ON
8 SSM FLAT only 29FU3 Tool is Music
9 TORBO SOUND OFF only 29FU3 Tool is ON
10 AVL OFF
11 BALANCE 0
12 ON/OFF TIME OFF
13 AUTO SLEEP OFF
14 CHILD LOCK OFF
15 DEGAUSS OFF
16 EYE OFF OPTION
17 TILT 0 OPTION
18 BLUE BACK OFF OPTION
19 BOOSTER OFF OPTION
4.2.1 PSM MODE Default Setting (PAL)

Picture Mode Default Setting
[Table 11]Picture Mode Default Setting
PSM Dynamic Standard Mild Game

CONTRAST 100 90 60 50
BRIGHT 60 55 55 55
COLOR 60 55 55 60
SHARPNESS 60 60 50 50
5. OPTION Adjustment (PAL)
1) OPTION adjustment decide Model Function, press IN-START

KEY of remocon and enter adjustment mode. Then choose
OPTION 1, 2, 3, 4, 5 to adjust separately.
2) OPTION1 scope (0~255), OPTION2 scope (0~255),
OPTION3 scope (0~250),
OPTION4 scope (0~337), OPTION5 scope (0~252). Using Vol.
+, - and CH +, - KEY directly input. (OPTION data automatic
setting)
3) OPTION data in BOM (Chassis Assy SPECIFICATION) show:
such as [111,111,111.111,111]
6. SOUND PRE-SCALER
This SVC setting value is set since Model design for standard, so
adjustment should not be done at manufacture process. This
adjustment specification shows for only reference.
Audio Out Level SPEC

PAL B/G, D/K, I : 500mVrms at 54 % modulation ratio.
SECAM B/G, D/K, L/L’ : 500mVrms at 54 % modulation ratio.

TROUBLE SHOOTING
1. RF-STEREO MODEL
1) PICTURE OK / NO SOUND
Selected correct system in menu
OK
NO
Check the waveform IF 1 of TU101 Check/ Replace TU101 or Input signal
OK
NO NO
Check the voltage at pin 3, 9, 16, 43,
Check the waveform at pin 4, 5 of IC501 Check/ Replace IC501
86, 88, 90 of UOCIII
OK
NO
Check the voltage at pin 57, 58 of
Check the waveform at pin 4, 2 of IC601
UOCIII
OK
NO
Check the waveform at pin 6 of IC601 Check/ Replace Q601
OK
NO
Check the waveform at pin 8, 9, 11, 12
Check/ Replace IC601
of IC601
OK
NO
Check the waveform at pin 5, 7 of IC601 Check/ Replace R823, D826
2) No Raster / Sound OK(1/2)
Check the Heater voltage of

CPT(6~6.4 Vrms)
Check HV, Screen voltage of CPT Check R, G, B out of CPT board Check the Heater pulse of FBT T402
Check IC901,
Check FBT T402 Check 197V line of CPT Board & Check FR901, P403A, Check FBT T402
P403A
if no problem check and Replace P902B, FR401

3) No Raster (2/2)
Check the B+ at D829

cathode
Normal Abnormal
OPEN
NO Check Fuse of AC line
Is the voltage each
pin voltage of IC501
OK Check/ Replace Fuse
Check the in/out of

regulator(IC822,
Check pin 73 of Check the voltage of NO
IC823, IC824)
IC501(H_Out) C832
Check/ Replace
IC501 Check/ Replace DB801
Check Q402
collector waveform Check the voltage NO
pin4 of IC810
Check/ Replace
Q402
Check/ Replace Fuse and IC810
Check T401 & each
pin voltage
Check/ Replace
IC810, IC802, Q830
Check/ Replace
T401
Check Q401collect NO
Check Fuse and Diode of secondary
waveform
Load of SMPS trans(T801)
Check/ Replace
Q401
OK
Check & Replace Check/ Replace IC501
T402

4) No Picture/ No Sound
Is any OSD displayed?
NO
OK
OK
Check IC501 pin 83, Check receiving system in MENU OK
84, 85 (R, G, B out) & execute Auto - Program
Does the auto - Program

operate properly
NO
OK
Store on manual -program MENU
NO NO
Check the waveform Check IC501 pin 83, Check SMPS Trans Go to No sound/
pin73(H-out) 84, 85 (R, G, B out) Secondary Voltage picture OK
OK
Check pin3 Reset

Voltage
OK
NO
Check pin7, 8 SCL, Check IC12(EEPROM)
SDA & SCL, SDA, Line
OK
OK
Replace IC501
P20A (R, G, B out of P20A (R, G, B out of

IC501) IC501)

2. AV STEREO/ MONO MODEL
Select correct system in menu
OK
OK
Check the connection of AV
equipment
AV
Does the auto - Program

Check TU101 Tuner
operate properly
OK
OK
NO
Check the waveform at Check the voltage of pin3, 9,
pin57, 58 of IC501 16, 43, 86,88,90 of IC501
OK
NO
Check the waveform at
Check the signal line of SPK-N,P
pin4, 12, of IC601
OK
NO
Check the waveform at
Check pin5 (mute) of IC501
pin6 of IC601
OK
NO NO
Check the waveform at Check the voltage at Check/ Replace
pin8, 9, 11, 12 of IC601 pin5, 7, of IC601 R823, D826
OK
NO
Check the connection of side
Correct the Board
or Front AV Board P201A
OK
Replace IC601

PRINTED CIRCUIT BOARD
MAIN

SIDE-A/V
POWER+CONTROL

BLOCK DIAGRAM

MEMO

EXPLODED VIEW
943 400
913
option
170 153
150
174
112
105
504
530
520
300
330
501
320
310
121
120
600

The components identified by mark is
critical for safety.
EXPLODED VIEW PARTS LIST Replace only with part number specified.
LOCA. No. PART No. DESCRIPTIONS
105 4980900199A Supporter MOLD HIPS Supporter HIPS 40AF

112 6334V29010B CPT,Bare A68QCU770X 000MGB 29INCH FLAT 5/4 4
6335V29029A CPT,ITC A68QCU770X 770LGF 29INCH FLAT
6335929003A CPT,ITC A68QCU820X 54(0.5G) 29INCH TINT +0.5G 4/3
120 6400VA0001G Speaker,Full Range” YDP511-52LG Y20 10W 8OHM 82DB 180HZ
121 4810900054A Bracket MOLD PP SPEAKER 21FC1 MC049B PP LGE
150 6140VC2007F Coil,Degaussing 6140VC2007F 16OHM AL 55T 0.65mM SQU
153 6150V-5009B Coil,Deflection Yoke 6150Z*1248G 0.71mH 17mH NONE 0 29IN
170 170-844K Drawing,Assembly CPT EARTH UL1015 AWG22-TBC 0.12X4X1
174 6410VEH001M Power Cord Assembly 6410VEH001M YP-205 TJC1-2Y 2.4M 400
300 ACQ30182101 Cover Assembly 29FC2 CW62A 29”” LGEAY 29FC2 CA ASSY”
ACQ30182107 Cover Assembly “29FC2RLX CW62A 29”” 2TONE SKD A”
310 5020900112A Button CONTROL 21FC2 ABS 6KEY LGESY TOOL
320 320-062H Spring CUTTING STSC304 COIL STSC304 - - NO
330 5020900111A Button POWER 21FC2 ABS 1KEY LGESY TOOL
400 3809900125K Cover Assembly 29FC1CLE-TG CW062A 29”” SY-U.A.E SET”
3809900125Q Cover Assembly 29FC1ANX-ZF MC05HB 29”” SY-RA S”
501 3210900001A Cover MOLD HIPS BRACKET HIPS 405AF CHASSI
3210900001B Cover MOLD HIPS 29FC2RL-T1 HIPS 403A
504 351-008A Link MOLD ABS POWER None PVC LINK POwer
520 EBR39093303 PCB Assembly MAIN M.I CW62C 29FC2RL-Z1 KDHLCEY S
EBR38535613 Hand Insert PCB Assembly MAIN M.I CW62C 29FC2RL-Z1. QDK
EBR39093312 PCB Assembly MAIN M.I CW62C 29FC2RL-Z1 KDHQCTY SY-TASHKENT
530 EBR30807606 PCB Assembly SUB M.I CW62A 29FC2 SY TO CIS SET M
EBR30807605 PCB Assembly SUB M.I CW62A 29FG1 AND 29FC
600 EBR30839304 PCB Assembly SUB M.I CW62A 29FC2 SY TO CIS SIDE
EBR30666703 PCB Assembly SUB M.I CW62A 29FC2 SY TO CIS
913 FAB30021505 Screw Assembly FAB30021505 TAPTITE P TYPE D7.0 L40
943 FAB30006309 Screw,Taptite 1SZZ9PB012A TH + P 4MM 16MM MSWR10

REPLACEMENT PARTS LIST
For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film
the characters at 2nd and 3rd CQ : Polyester RS : Metal Oxide Film
digit in the P/No. means as CE : Electrolytic RN : Metal Film
follows; RF : Fusible
LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION
D414 0DRDC00014D RGP15J 600V 1.3V 5UA 50A 250NSEC DO

IC
D601 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC12 0IAL241610B AT24C16A-10PU-2.7 16KBIT 2KX8BIT 2. D602 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC301 0IPRP00741A STV9326 10TO30V 50mA 50to60Hz HEPTA D603 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC302 0ISTL00068A LF353N +-18V 5TO10mV - 500MW 500MW D604 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC601 EAN36113503 LA42102NHK-E 22V 0 10% 15W 25W 40dB D606 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC802 0IPRPKD003A PC17L1(5V/35V 4P) 5V 35V 35V 50MA 1 D815 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50
IC810 EAN36799301 STR-W6556A 16.2V~19.4V 9V~11V SWITC D818 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
IC823 0IMCRAU004A S1117-33PIC 4.8TO12V 3.3V 2W TO220 D820 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
IC824 0IMCRKE020A KIA78S06P 8.1TO21V 6V 600MW TO92 ST D823 EAH30560501 SFAF504G 200V 975MV 10UA 125A 35NSE
IC826 0IMCRKE018A KIA78R05API 6TO12V 5V 1.5W TO220IS D826 EAH30560501 SFAF504G 200V 975MV 10UA 125A 35NSE
IC901 0IPRP00747A TDA6107AJF 180TO210V 6mA 5.5M SIP S D828 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
Q830 EAN33533101 KIA431A-AT/PF 2.47TO2.52V 36V 770MW D829 0DRDC00014G RU4AM 600V 1.3V 10UA 70A 100NSEC DO
SW SAA30039712 3.34 13FD EUROPE FLASH ROM EU NO TX D845 0DZ150009BG GDZJ15B 15V 13.89TO14.62V 40OHM 500
D846 0DRDC00014Q EU1ZS 200V 2.5V 10UA 15A 120NSEC DO
TRANSISTOR
D847 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
Q1106 0TR733009AA KSA733C-Y PNP -5V -60V -50V -0.15A D901 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
Q201 0TR126609AA KTA1266-Y(KTA1015) PNP -5V -50V -50 D902 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
Q203 0TR319809AA KTC3198(KTC1815) NPN 5V 60V 50V 150 D903 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D
Q204 0TR126609AA KTA1266-Y(KTA1015) PNP -5V -50V -50 D904 0DRDC00014E 1N4004A 400V 1.1V 5UA 30A - DO41 TP
Q301 0TR126609AA KTA1266-Y(KTA1015) PNP -5V -50V -50 DB801 0DRTW00131C TS6P05G 600V 1V 5UA 150A TS6P ST 4P
Q401 0TRSA10005A 2SC6090LS NPN 5V 1.5KV 700V 10A 10U ZD101 0DZ330009DG GDZJ33B 33V 30.32TO31.88V 65OHM 500
Q402 EBK37065201 2SC3902S NPN 6V 180V 160V 1.5A 2.5A ZD301 0DZ120009BG GDZJ12B 12V 11.44TO12.03V 30OHM 500
Q502 0TR126609AA KTA1266-Y(KTA1015) PNP -5V -50V -50 ZD302 0DZ120009BG GDZJ12B 12V 11.44TO12.03V 30OHM 500
Q503 0TR319809AA KTC3198(KTC1815) NPN 5V 60V 50V 150 ZD401 0DZ510009BF GDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MW
Q504 0TR319809AA KTC3198(KTC1815) NPN 5V 60V 50V 150 ZD402 0DZ120009BG GDZJ12B 12V 11.44TO12.03V 30OHM 500
Q505 0TR127009AA KTA1270-Y(KTA562TM) PNP -5V -35V -3 ZD501 0DZ510009AK GDZJ5.1B 5.1V 4.94TO5.2V 80OHM 500M
Q506 0TR127009AA KTA1270-Y(KTA562TM) PNP -5V -35V -3 ZD502 0DZ820009BF GDZJ8.2B 8.2V 7.78TO8.19V 20OHM 500
Q601 0TR126609AA KTA1266-Y(KTA1015) PNP -5V -50V -50 ZD827 0DZ820009BF GDZJ8.2B 8.2V 7.78TO8.19V 20OHM 500
Q803 0TR102009AB KRC102M(KRC1202) NPN 30V 10V 50V 10 ZD910 0DZ510009BF GDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MW
Q810 0TR319809AA KTC3198(KTC1815) NPN 5V 60V 50V 150
Q811 0TR319809AA KTC3198(KTC1815) NPN 5V 60V 50V 150 CAPACITOR
Q840 0TR421009CA BF421(Philips) PNP -5V -0.3KV -0.3K C103 0CE475DK618 EGR475M050T1G1C11G 4.7uF 20% 50V 50
C107 0CE227DD618 EGR227M010T1G1E11G 220uF 20% 10V 25
DIODE
C108 0CE475DK618 EGR475M050T1G1C11G 4.7uF 20% 50V 50
D101 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50 C109 0CE226CK638 SHL5.0TP50VB22M 22uF 20% 50V 106MA
D11 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50 C1103 0CE4763F618 ESF476M016T1A5E05G 47uF 20% 16V 60M
D1101 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50 C113 0CN1030F679 RH EP050 Y103M-B-B 10nF 20% 16V X5R
D301 0DRDC00014C 1N4005GP 600V 1.1V 5UA 30A 0SEC DO4 C1201 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
D302 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D C1202 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
D401 EAH30754301 RU4DS 1.8V 1.3KV 1.5A 50A 400NSEC 0 C15 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
D402 0DRDC00014G RU4AM 600V 1.3V 10UA 70A 100NSEC DO C17 0CN1030F679 RH EP050 Y103M-B-B 10nF 20% 16V X5R
D403 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50 C201 0CE226DF618 EGR226M016T1G1C11G 22uF 20% 16V 75M
D404 0DS141489AB 1N4148 1V 100V 150MA 500MA 4NSEC 50 C202 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
D405 0DRDC00014D RGP15J 600V 1.3V 5UA 50A 250NSEC DO C203 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5
D406 0DRDC00014D RGP15J 600V 1.3V 5UA 50A 250NSEC DO C204 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
D407 0DRDC00014A TVR06J 600V 1.3V 10UA 25A 150NSEC D C205 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5
Copyright©2007 LG Electronics.Inc. All right reserved. - 26- LGE Internal Use Only
C206 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5 C519 181-007F ECQ-V1H224JL3(TR) 220nF 5% 50V MPE
C207 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5 C520 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C208 0CE226DF618 EGR226M016T1G1C11G 22uF 20% 16V 75M C530 0CN2220F569 RH EP050 X222K-B-B 2.2nF 10% 16V X7
C209 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5 C532 0CF4741L438 PCMT 365 76474 0.47uF 5% 63V MPE -4
C21 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M C533 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C224 0CE226DF618 EGR226M016T1G1C11G 22uF 20% 16V 75M C547 0CF4741L438 PCMT 365 76474 0.47uF 5% 63V MPE -4
C225 0CE226DF618 EGR226M016T1G1C11G 22uF 20% 16V 75M C548 0CN2220F569 RH EP050 X222K-B-B 2.2nF 10% 16V X7
C270 0CE227DD618 EGR227M010T1G1E11G 220uF 20% 10V 25 C551 0CE226DD618 EGR226M010T1G1C11G 22uF 20% 10V 75M
C303 181-091D DEHR33A102KN2A 1nF 10% 1000V Y5R -2 C553 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C304 0CE107CK638 SHL5.0TP50VB100M 100uF 20% 50V 306M C554 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M
C306 0CQ1541N501 HPE 2A 154K BK 150nF 10% 100V PE -4 C556 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C310 0CQ2221N509 PEI222K2AT 2.2nF 10% 100V PE -40TO+ C557 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C311 0CN1020K519 RH UP050 B102K-B-B 1000pF 10% 50V Y C558 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C312 0CN1020K519 RH UP050 B102K-B-B 1000pF 10% 50V Y C559 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C313 0CQ5621N509 PEI562K2AT 5.6nF 10% 100V PE -40TO+ C561 0CQ3931N509 PEI393K2AT 39nF 10% 100V PE -40TO+8
C314 0CE475DP618 EGR475M160T6G1E11G 4.7uF 20% 160V 5 C562 0CQ3931N509 PEI393K2AT 39nF 10% 100V PE -40TO+8
C402 0CE475DK618 EGR475M050T1G1C11G 4.7uF 20% 50V 50 C563 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5
C403 0CK1520W515 DCM152K30Y5PL6FJ5A 1.5nF 10% 500V Y C564 0CE106DK618 SMS5.0TP50VB10M 10uF 20% 50V 72MA -
C404 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA C569 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C405 181-091Y LRYM28681KXA 680pF 10% 2000V Y5R -2 C570 0CE107DF618 EGR107M016T1G1C11G 100uF 20% 16V 16
C407 181-010A PPN223J2GH 22nF 5% 400V PP -40TO+85 C571 0CE336DD618 EGR336M010T1G1C11G 33uF 20% 10V 85M
C411 0CE105BR618 ESM105M250T1G5E11G 1uF 20% 250V 15M C572 0CN4710K519 RH UP050 B471K-B-B 470pF 10% 50V Y5
C412 0CF5341U460 MPP40Y534JHJD01 530nF 5% 400V MPP - C573 0CX1000K409 RH UP050SL100J-B-B 10pF 5% 50V S2L
C413 181-091R LRYM7102KHA 1n 10% 1000V Y5R -25TO+ C574 0CX1000K409 RH UP050SL100J-B-B 10pF 5% 50V S2L
C414 0CK2710W515 DCM271K20Y5PL6FJ5A 270pF 10% 500V Y C575 0CX1000K409 RH UP050SL100J-B-B 10pF 5% 50V S2L
C415 0CE108BH618 ESM108M025T1G5K20G 1000uF 20% 25V 7 C576 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C416 181-009R PPN223K2DH 22nF 10% 200V PP -40TO+8 C577 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA
C417 0CK2710W515 DCM271K20Y5PL6FJ5A 270pF 10% 500V Y C578 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C419 0CE108DH618 SMS5.0TP25VB1000M 1000uF 20% 25V 1. C579 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA
C420 181-010T PPN153J2JH 15nF 5% 630V PP -40TO+85 C580 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C421 0CK2710W515 DCM271K20Y5PL6FJ5A 270pF 10% 500V Y C581 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M
C422 0CE475DR618 EGR475M250T1G1G11G 4.7uF 20% 250V 7 C584 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C444 181-013N MPP274J2GD 270nF 5% 400V MPP -40TO+ C585 0CE225CK638 SHL5.0TP50VB2.2M 2.2uF 20% 50V 34MA
C463 0CF20312460 PCMP384 92203 0.02uF 5% 2000V MPP - C586 0CE225CK638 SHL5.0TP50VB2.2M 2.2uF 20% 50V 34MA
C501 0CF2241L438 PCMT 365 76224 0.22uF 5% 63V MPE -4 C587 0CN1030F679 RH EP050 Y103M-B-B 10nF 20% 16V X5R
C502 0CE225CK638 SHL5.0TP50VB2.2M 2.2uF 20% 50V 34MA C590 0CE225CK638 SHL5.0TP50VB2.2M 2.2uF 20% 50V 34MA
C503 0CQ6821N509 PEI682K2AT 6.8nF 10% 100V PE -40TO+ C591 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C504 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M C592 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M
C505 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80 C594 0CQ1031N509 PEI103K2AT 0.01uF 10% 100V PE -40TO
C506 0CQ1031N509 PEI103K2AT 0.01uF 10% 100V PE -40TO C595 181-301C NPP100V154J10F 150nF 5% 100V PP -40
C509 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA C596 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80
C510 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80 C597 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA
C512 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80 C599 0CN2230H949 RH TP050 F223Z-B-B 22000p -20TO+80%
C513 0CE337DD618 SMS5.0TP10VB330M 330uF 20% 10V 386M C602 0CE477DH618 EGR477M025T1G1H15G 470uF 20% 25V 64
C516 0CE226DD618 EGR226M010T1G1C11G 22uF 20% 10V 75M C603 0CE475DK618 EGR475M050T1G1C11G 4.7uF 20% 50V 50

C604 0CQ3321N509 PEI332KA2T 3.3nF 10% 100V PE -40TO+ R1202 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5
C605 0CE476DF618 SMS5.0TP16VB47M 47uF 20% 16V 0A -40
COIL & INDUCTOR
C607 0CE476DH618 SMS5.0TP25VB47M 47u 20% 25V 131MA -
C608 0CE106DF618 SMS5. 0TP16VB10M 10uF 20% 16V 72MA J549 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C609 0CQ3321N509 PEI332KA2T 3.3nF 10% 100V PE -40TO+ L102 0LA0102K139 Inductor,Wire Wound,Axial LAL04TB100K 10UH
C610 0CE475DK618 EGR475M050T1G1C11G 4.7uF 20% 50V 50 L1102 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C611 0CE476DH618 SMS5.0TP25VB47M 47u 20% 25V 131MA - L1201 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C616 0CN1040K949 CH UP050 F104Z-B-B Z 100nF -20TO+80 L1202 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C807 181-091Q LRYM5471KHA 470pF 10% 1000V Y5R -25 L214 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C808 0CE477BH618 ESM477M025T1G5H15G 470uF 20% 25V 51 L216 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C809 0CE228BF618 ESM228M016T1G5K25G 2200uF 20% 16V 9 L401 EAP37045801 Coil,Choke CH-1420 328.5Ts 6mH 50V 700MA
C811 0CE335CK636 ERN335M050T1G5C11G 3.3uF 20% 50V 30 L402 6140VE0001J Coil,Linearity CN29F1 20uH 50V 0A 18X41MM
C812 181-091Q LRYM5471KHA 470pF 10% 1000V Y5R -25 L431 150-717K Coil Choke RN-29FA11 1.1uH 50V 0A
C813 0CE476DD618 EGR476M010T1G1C11G 47uF 20% 10V 105 L501 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C814 181-091W LRYM27471KX1A 470pF 10% 2000V Y5R - L503 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C816 0CE227DP61A EGR227M160T1G1M32G 220uF 20% 160V 8 L504 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C818 0CQ2231N509 PEI223K2AT 0.022u 10% 100V PE -40TO L505 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C821 181-091Q LRYM5471KHA 470pF 10% 1000V Y5R -25 L506 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C822 0CE108DD618 SMS5.0TP10VB1000M 1000uF 20% 10V 85 L507 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C823 181-120N SDE102M09FS1 1nF 20% 4000V Y5U -25T L511 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C826 0CE108DD618 SMS5.0TP10VB1000M 1000uF 20% 10V 85 L514 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C827 0CQZVBK002D PCX2 335 91593 0.47uF 10% 275V MPP L548 0LA0121K119 Inductor,Wire Wound,Axial LAL02TB1R2K
C829 0CE476DD618 EGR476M010T1G1C11G 47uF 20% 10V 105 L801 150-C02E Coil,Choke 150-C02E 50uH 50V 0A 12X17MM
C830 0CE228DH61A EGR228M025T1G1L25G 2200uF 20% 25V 1 R226 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C833 0CK10201515 DCH102K34Y5PN6FJ5A 1nF 10% 1000V Y5 R227 0LA0102K119 Inductor,Wire Wound,Axial LAL02TB100K 10UH
C834 0CK10201515 DCH102K34Y5PN6FJ5A 1nF 10% 1000V Y5
CONNECTOR
C835 0CQZVBK002A PCX2 335 M9729 0.1uF 20% 275V MPP -
C836 0CK4710W515 DCM471K20Y5PL6FJ5A 470pF 10% 500V Y G100 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C837 0CE337KV6A0 LTW337M450S1A5S45G 330uF 20% 450V 1 G1121 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C838 0CE227DK618 SMS5.0TP50VB220M 220uF 20% 50V 586M G1122 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C839 0CE106DH618 SMS5.0TP25VB10M 10uF 20% 25V 72MA - G13 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C840 0CE226BK618 ESM226M050T1G5C11G 22uF 20% 50V 85M G14 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C841 181-011B MPPS102J3VD 1nF 5% 1.6KV MPP -40TO+ G15 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C842 0CQ3321N509 PEI332KA2T 3.3nF 10% 100V PE -40TO+ G16 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C843 181-007C ECQV1H104JL3 100nF 5% 50V MPE -40TO G17 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C844 0CQ1031N509 PEI103K2AT 0.01uF 10% 100V PE -40TO G18 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C846 0CE107DD618 SMS5.0TP10VB100M 100uF 20% 10V 157M G19 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C848 0CE107CQ650 SHL5.0MC200VB100M 100uF 20% 200V 60 G20 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C849 0CE477DD618 EGR477M010T6G1G11G 470uF 20% 10V 42 G21 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C853 0CE105CP638 SHL5.0TP160VB1M 1uF 20% 160V 27MA - G22 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C858 181-091X LRYM27561KXA 560pF 10% 2000V Y5R -2 G23 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C861 181-120N SDE102M09FS1 1nF 20% 4000V Y5U -25T G24 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C901 0CE475DR618 EGR475M250T1G1G11G 4.7uF 20% 250V 7 G28 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C903 181-033S DCH122K39Y5PP7VK7A 1.2nF 10% 2000V G29 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C904 0CE475DR618 EGR475M250T1G1G11G 4.7uF 20% 250V 7 G30 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C908 0CH3104P56C C4532X7R2J104KT 100000pF 10% 630V X G33 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
C910 0CN5610K519 RH UP050 B561K-B-B 560pF 10% 50V Y5 G34 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
J573 0CN1030F679 RH EP050 Y103M-B-B 10nF 20% 16V X5R G35 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
R1201 0CN1010K519 RH UP050 B101K-B-B 100pF 10% 50V Y5 G36 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP

G37 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP 6631V25A27L Harness,Multi 2P-4T 2P 4T UL1007 AWG26 N
G38 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP 6631V25014H Harness,Single 6631V25014H GIL-G-03 35097-
G40 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P06B 387-A07E Harness,Single 7p(2.5) GIL-G-07 GIL-J-07
G41 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P101 366-921B GIL-G-03P-S3T2-E 3P 2.54MM 1R STRAI
G42 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P103 366-009D 366-009D 1P PIN HEADER STRAIGHT DIP
G45 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P14A 366-921F GIL-G-07P-S3T2-E 7P 2.50MM 1R STRAI
G47 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P201A 366-921E GIL-G-06P-S3T2-E(TYPOE) 6P 2.50MM 1
G48 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P201B 387-A06J Harness,Single EAD00975201 GIL-G-06 GIL-J-
G49 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P401 366-043K 35929-0410 4P 10.00MM 1R STRAIGHT D
G50 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P602 366-921C GIL-G-04P-S3T2-E(2.54mm) 4P 2.54MM
G51 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P603 366-921B GIL-G-03P-S3T2-E 3P 2.54MM 1R STRAI
G52 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P801 366-043B 35929-0210 2P 10.00MM 1R STRAIGHT D
G53 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P802 366-043B 35929-0210 2P 10.00MM 1R STRAIGHT D
G55 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP P902B 387-603E Harness,Multi LPI-025-027 9P 4P-5P UL1007 N
G57 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
RESISTOR
G58 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP
G6 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP C851 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8
G63 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP FR403 0RP0050H709 SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2
G66 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP FR901 0RF0101K607 FNS02T3J1R00 1OHM 5% 2W 12.0X4.0MM
G67 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP J230 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M
G69 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP J231 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M
G7 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP J574 0RD1002F609 RD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8
G70 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP J581 0RD2200F609 RD-96T1J220R 220OHM 5% 1/6W 3.2X1.8
G73 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP L203 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M
G77 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP L510 0RD0222A609 RDM92T1J22R0 22OHM 5% 1/2W 6.5X2.3M
G8 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP R101 0RD3902F609 RD-96T1J39K0 39KOHM 5% 1/6W 3.2X1.8
G83 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP R110 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
G85 336-072C BSP(C2600R) 1P LUG STRAIGHT DIP TP R1101 0RD1301F609 RD-96T1J1K30 1.3KOHM 5% 1/6W 3.2X1.
170-853F Harness,Single 170-853F AE-9306 AE-9306 R1203 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M
387-916M Harness,Single 387-916M BH10009 BH10009 R15 0RD1002F609 RD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8
387-552M Harness,Single EAD00992901 YFH800-02 R201 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8

R202 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M R440 0RMZVBK002D RSR05V-J15K0 15KOHM 5% 5W 14X9.5X25
R203 0RD0682F609 RD-96T1J68R0 68OHM 5% 1/6W 3.2X1.8M R502 0RD3001F609 RD-96T1J3K00 3KOHM 5% 1/6W 3.2X1.8M
R204 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M R503 0RD3001F609 RD-96T1J3K00 3KOHM 5% 1/6W 3.2X1.8M
R205 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M R506 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R207 0RD5602F609 RD-96T1J56K0 56KOHM 5% 1/6W 3.2X1.8 R509 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R212 0RD1201A609 RDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2. R511 0RD3301F609 RD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.
R215 0RD2402F609 RD-96T1J24K0 24KOHM 5% 1/6W 3.2X1.8 R512 0RD3301F609 RD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.
R221 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8 R519 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R222 0RD1201F609 RD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1. R521 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R223 0RD1201F609 RD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1. R525 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M
R225 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8 R526 0RN5101F409 RN-96T1F5K10 5.1KOHM 1% 1/6W 3.2X1.
R228 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8 R534 0RD2703F609 RD-96T1J270K 270KOHM 5% 1/6W 3.2X1.
R23 0RD0151A609 RDM92T1J1R50 1.5OHM 5% 1/2W 6.5X2.3 R535 0RD1202F609 RD-96T1J12K0 12KOHM 5% 1/6W 3.2X1.8
R27 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8 R538 0RD1803F609 RD-96T1J180K 180KOHM 5% 1/6W 3.2X1.
R28 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8 R539 0RD1003F609 RD-96T1J100K 100KOHM 5% 1/6W 3.2X1.
R303 0RD2400A609 RDM92T1J240R 240OHM 5% 1/2W 6.5X2.3 R540 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R304 0RD0561A609 RDM92T1J5R60 5.6OHM 5% 1/2W 6.5X2.3 R543 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R306 0RD1002F609 RD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8 R545 0RD0752F609 RD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8M
R308 0RN4702F409 RN-96T1F47K0 47KOHM 1% 1/6W 3.2X1.8 R547 0RD1203F609 RD-96T1J120K 120KOHM 5% 1/6W 3.2X1.
R311 0RN0431J607 RN-01T3J4R30 4.3OHM 5% 1W 12.0X4.0M R550 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R314 0RD4701F609 RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1. R551 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R315 0RN0431J607 RN-01T3J4R30 4.3OHM 5% 1W 12.0X4.0M R552 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R317 0RD1203F609 RD-96T1J120K 120KOHM 5% 1/6W 3.2X1. R554 0RD3900F609 RD-96T1J390R 390OHM 5% 1/6W 3.2X1.8
R318 0RN1001F409 RN-96T1F1K00 1KOHM 1% 1/6W 3.2X1.8M R555 0RD6800F609 RD-96T1J680R 680OHM 5% 1/6W 3.2X1.8
R320 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8 R556 0RN3902F409 RN-96T1F39K0 39KOHM 1% 1/6W 3.2X1.8
R321 0RD5101F609 RD-96T1J5K10 5.1KOHM 5% 1/6W 3.2X1. R557 0RD1202F609 RD-96T1J12K0 12KOHM 5% 1/6W 3.2X1.8
R322 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M R563 0RD1501A609 RDM92T1J1K50 1.5KOHM 5% 1/2W 6.5X2.
R328 0RN4702F409 RN-96T1F47K0 47KOHM 1% 1/6W 3.2X1.8 R566 0RN4701F409 RN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.
R403 0RD5600A609 RDM92T1J560R 560OHM 5% 1/2W 6.5X2.3 R567 0RN4701F409 RN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.
R405 0RX3300K618 S M L02R0J330R 330OHM 5% 2W 12.0X4. R569 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R407 0RD0332A609 RDM92T1J33R0 33OHM 5% 1/2W 6.5X2.3M R572 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R409 0RS5602H609 RS-92T1J56K0 56KOHM 5% 1/2W 9.0X3.0 R581 0RD4701F609 RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.
R410 0RS4702H609 RS-92T1J47K0 47KOHM 5% 1/2W 9.0X3.0 R582 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8
R411 0RS1001H609 RS-92T1J1K00 1KOHM 5% 1/2W 9.0X3.0M R583 0RD4702F609 RD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8
R412 0RD7501A609 RDM92T1J7K50 7.5KOHM 5% 1/2W 6.5X2. R584 0RD0101F609 RD-96T1J1R00 1OHM 5% 1/6W 3.2X1.8MM
R415 0RD3001F609 RD-96T1J3K00 3KOHM 5% 1/6W 3.2X1.8M R585 0RD0101F609 RD-96T1J1R00 1OHM 5% 1/6W 3.2X1.8MM
R417 0RD1204F609 RD-96T1J1M20 1.2MOHM 5% 1/6W 3.2X1. R587 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R433 0RS1801K619 SMR02R1J1K8R 1.8KOHM 5% 2W 8.6X3.5M R591 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R435 0RS2200K607 RSD02T3J220R 220OHM 5% 2W 12.0X4.0M R592 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8
R438 180-777H RSR07V-J910R 910OHM 5% 7W 14X9.5X40 R595 0RD6800F609 RD-96T1J680R 680OHM 5% 1/6W 3.2X1.8
R439 180-777H RSR07V-J910R 910OHM 5% 7W 14X9.5X40 R601 0RD0221F609 RD-96T1J2R20 2.2OHM 5% 1/6W 3.2X1.8

R602 0RD0221F609 RD-96T1J2R20 2.2OHM 5% 1/6W 3.2X1.8 R902 0RD2200F609 RD-96T1J220R 220OHM 5% 1/6W 3.2X1.8
R603 0RD0221F609 RD-96T1J2R20 2.2OHM 5% 1/6W 3.2X1.8 R903 0RD2200F609 RD-96T1J220R 220OHM 5% 1/6W 3.2X1.8
R604 0RD0221F609 RD-96T1J2R20 2.2OHM 5% 1/6W 3.2X1.8 R906 0RD1201A609 RDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.
R605 0RD9101F609 RD-96T1J9K10 9.1KOHM 5% 1/6W 3.2X1. R907 0RD1201A609 RDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.
R607 0RD1002F609 RD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8 R908 0RD1201A609 RDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.
R609 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8 R909 0RS2201H609 RSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.
R611 0RD9101F609 RD-96T1J9K10 9.1KOHM 5% 1/6W 3.2X1. R910 0RS2201H609 RSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.
R612 0RD3002F609 RD-96T1J30K0 30KOHM 5% 1/6W 3.2X1.8 R911 0RS2201H609 RSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.
R615 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M R912 0RD2204A609 RDM92T1J2M20 2.2MOHM 5% 1/2W 6.5X2.
R616 0RD3002F609 RD-96T1J30K0 30KOHM 5% 1/6W 3.2X1.8 R920 0RD4703A609 RDM92T1J470K 470KOHM 5% 1/2W 6.5X2.
R618 0RD3901F609 RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.
SWITCH
R801 0RN3002F409 RN-96T1F30K0 30KOHM 1% 1/6W 3.2X1.8
R811 0RD1002F609 RD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8 SW1101 140-315H THVH472GBC(HORIZONTAL) 1C1P 12VDC 0
R812 0RD4701F609 RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1. SW1102 140-315H THVH472GBC(HORIZONTAL) 1C1P 12VDC 0
R813 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M SW1103 140-315H THVH472GBC(HORIZONTAL) 1C1P 12VDC 0
R819 0RP0050H709 SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2 SW1106 140-315H THVH472GBC(HORIZONTAL) 1C1P 12VDC 0
R820 0RD1000F609 RD-96T1J100R 100OHM 5% 1/6W 3.2X1.8 SW801 6600M000057 KDC-A02-F AC 250VAC 5A 1PCS 1C1P HO
R821 0RD4701F609 RD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.
SPARK GAP, AXIAL
R822 0RP0020J809 SPF01T1MR020 0.02OHM 20% 1W 6.5X2.3
R823 0RP0020J809 SPF01T1MR020 0.02OHM 20% 1W 6.5X2.3 SG901 165-004A 152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A
R825 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M SG902 165-004A 152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A
R826 0RD0472F609 RD-96T1J47R0 47OHM 5% 1/6W 3.2X1.8M SG903 165-004A 152F-L3N/S-23 RADIAL 1.5KV 1.5KV 0A
R829 0RP0050H709 SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2 SG904 6918VAX002L SSA-122N-A1 AXIAL 1.2KV 1.2KV 0A 0M
R830 0RN9102F409 RN-96T1F91K0 91KOHM 1% 1/6W 3.2X1.8 SG911 6918VAX002K SSA-351M AXIAL 350V 350V 0A 7.5MM T
R831 0RN2202F409 RN-96T1F22K0 22KOHM 1% 1/6W 3.2X1.8 SG912 6918VAX002K SSA-351M AXIAL 350V 350V 0A 7.5MM T
R832 0RD3902F609 RD-96T1J39K0 39KOHM 5% 1/6W 3.2X1.8 SG913 6918VAX002K SSA-351M AXIAL 350V 350V 0A 7.5MM T
R833 0RN9102F409 RN-96T1F91K0 91KOHM 1% 1/6W 3.2X1.8
FILTER & CRYSTAL
R834 0RN4701F409 RN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.
R835 0RKZVTA001C RN-92T1J8M20 8.2MOHM 5% 1/2W 9.0X3. FB401 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R836 0RD1001F609 RD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8M FB802 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R837 0RD5601F609 RD-96T1J5K60 5.6KOHM 5% 1/6W 3.2X1. FB803 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R838 0RD2200A609 RDM92T1J220R 220OHM 5% 1/2W 6.5X2.3 FB804 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R841 0RF0201K607 FNS02T3J2R00 2OHM 5% 2W 12.0X4.0MM FB833 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R843 0RD2203A609 RDM92T1J220K 220KOHM 5% 1/2W 6.5X2. FB845 125-022K Filter,Bead 125-022K 20OHM 3.5X6MM AXIAL
R845 0RD0821F609 RD-96T1J8R20 8.2OHM 5% 1/6W 3.2X1.8 T803 150-F06U Filter,Line Noise 150-F06U 20MH
R847 0RD3900F609 RD-96T1J390R 390OHM 5% 1/6W 3.2X1.8 X01 156-A01Z CrystalHC-49/U 24.576MHZ 50PPM
R848 0RX1003K618 S M L02R0J100K 100KOHM 5% 2W 12.0X4 Z101 EAM37222701 Filter,Saw K3561M 38.9MHZ 17.3X3.9X8.7MM
R849 0RX1003K618 S M L02R0J100K 100KOHM 5% 2W 12.0X4
R850 0RD3001F609 RD-96T1J3K00 3KOHM 5% 1/6W 3.2X1.8M
MISCELLANEOUS
R851 0RD3602F609 RD-96T1J36K0 36KOHM 5% 1/6W 3.2X1.8 MAY32284201 BOX DW2 830 560 633 2 COLOR 29FC2 U
R852 0RD1203F609 RD-96T1J120K 120KOHM 5% 1/6W 3.2X1. 3890900096C BOX DW2 1060 1104 1080 1 COLOR
R853 0RX0101K618 S M L02R0J1R00 1OHM 5% 2W 12.0X4.0M 3890900097C BOX DW2 1080 1124 100 1 COLOR
R858 0RKZVTA001K RN-92T1J470K 470KOHM 5% 1/2W 9.0X3. 3890900100B C/SKD 21 DWR2 332*484*300
R859 0RD1002A609 RDM92T1J10K0 10KOHM 5% 1/2W 6.5X2.3 MAY32284203 BOX DW2 830 560 633 2 COLOR 29
R860 0RF0161K607 FNS02T3J1R60 1.6OHM 5% 2W 12.0X4.0M F1101 0FS4001B53C Fuse,Time Delay 0215 004. CERAMIC 250V 4A
R861 0RD3901F609 RD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1. JK1203 6613V00004Q Jack,RCA PJ6054Q 14.0MM 3RX1C ANGLE
R901 0RD2200F609 RD-96T1J220R 220OHM 5% 1/6W 3.2X1.8 JK201 6612M00005D Jack,Scart HY107A 21P 21P/1C 3.81MM

JK202 6612VJH011T Jack,RCA PPJ109-18 15MM 2RX3C ANGLE

LD1101 0DL310800AA LED,DIP HTR3108BDA ROUND 4.98°¿0.2
PA1101 6712SCA226B Receiver ModuleKSM-913LG1T 4.5TO5.5V
Q302 0TFTH50001A FET2SK2961 N-CHANNEL MOSFET 60V +-
R855 163-048A Thermistor,NTC KL15L010 10OHM 15% 125V
RL802 6920VB1001K Relay,Contact JZC-36F-005-HL
SK901 6620VBC003A Socket,CRT PCS030A 8P STRAIGHT 15.24MM
T401 151-C02M Transformer,Linear 151-C02M EI19 10V 100V
T402 EBJ37038602 Transformer,FBT BSC26-N2137 D16 110V
T801 61709MC003C Transformer,Switching EER4942 300UH
TH801 163-058D Thermistor,PTC J503P83D070M290X 14OHM
TU101 6700MF0018A Tuner,Analog TAEA-G011D PAL-B/G+I+M+D/K
VD1111 164-003G VaristorTVR14621 620V 10% 250pF 14MM
ACCESSORIES
A1 MFL37773317 Manual,Owners CW62C EN CW62A CI Model
A1 MFL37773325 Manual,Owners LG AK/ME28 KA/RU/EN
A2 MKJ33981406 Remote ControllerCOMPLEX CW62A 29FS2
A3 450-018C Connector,RF BS901 - STRAIGHT RF
Copyright©2007 LG Electronics.Inc. All right reserved. @@@@@@@@@@f
32 @@@@@@@@@@f
LGE Internal Use Only

P/N:EBY37965601
SVC. SHEET : EBY37965601-S

29FC2RL PDF

Uploaded by

Copyright:

Available Formats

29FC2RL PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

29FC2RL PDF

Uploaded by

Copyright:

Available Formats

Internal Use Only

Adjustment Instructions .................................................................................8

Trouble Shooting ................................................................................................16

Printed circuit board........................................................................................20

Block Diagram .....................................................................................................20

Exploded View Parts List .............................................................................25

Replacement Parts List .................................................................................26

IMPORTANT SAFETY NOTICE

General Guidance Before returning the receiver to the customer,

Adjust brightness, color, contrast controls to minimum. AC Volt-meter

4 VOL OK VOL 4. D / E (Programme Up/Down)

(With TELETEXT / Without PIP)

13. Q.VIEW (or YELLOW) 4 VOL OK VOL

14. LIST (or BLUE) PR

(With PIP / Without TELETEXT)

1. MAIN POWER (ON/OFF)

6 Operating Environment 1)Temp : 0 ~ 45 deg

(5) If not specified, the receiver must be operated for more

3.2.1. Purity adjustment

3.2. Purity and Convergence adjustment 3.2.2. Adjustment for Convergence

3.3 SCREEN & WHITE BALANCE Adjusting Sub Add 20 17 21 18

Adjust repeatedly until HIGH LIGHT, LOW LIGHT match.

12. SCORRECT (S CORRECTION)

In PAL Channel (E5 CH), when adjust PIP_H position, it will

[fig.4] PAL Digital Pattern (EU05CH)

7. EW PARAB (EW PARABOLA)

8. EW TRAPE (EW TRAPEZOID)

9. EW UPCOR & EW LOCORR

[Fig.5] Cross-Hatch Pattern (PAL:E-7 CH)

Copyright©2007 LG Electronics.Inc. All right reserved. - 10 - LGE Internal Use Only

V SLOPE Vertical slope 16 14 15 12 17 10 24 15 Yes

3.6 SVC DEFAULT DATA (DATA below is supervised by EEPROM MASTER.)

[Table 5] SERVICE 1 [Table 6] SERVICE 3

Copyright©2007 LG Electronics.Inc. All right reserved. - 11 - LGE Internal Use Only

SYSTEM BG/DK/I/M, BG/DK/I/L

EYE 0: W/O EVE, 1: W/ EYE

4KEY 0: 6 KEY, 1: 4 KEY

TILT 0: W/O TILT, 1: W/ TILT

DEGUASS Degaussing option

OPTION4 OSD LANG Refer to the next page(table.9)

TXT LANG Refer to the next page(table.9)

USB (Southeast Asia) 0: W/O USB Model, 1: w/ USB Model (07.08.08)

CW62C CW62C Only 1 => Vol Curve/S Mute timing/Component

Compensation Value Change

OPTION5 REMOCON Not available

HOTEL 0: Normal, 1: HOTEL option

TURBOSCH 0: EU(RZ)=> W/O Turbo search,

QUARRAN (Arabia) 0: W/O Quarran , 1: W/ Quarran

COUNTRY ( EU) 0: NON MA Menu, 1: MA Menu

LGEINVOL(Southeast Asia) 0: Others, 1: LGEIN Volume

TS-AK 0: NON-TS-AK CPT, 1: TS/AK CPT

OPTION DATA in BOM ,for example:

LEVEL PART NO. SPECIFICATION DESCRIPTION

Copyright©2007 LG Electronics.Inc. All right reserved. - 12 - LGE Internal Use Only

Copyright©2007 LG Electronics.Inc. All right reserved. - 13 - LGE Internal Use Only

3.7 FM TX MODEL * (option) 4. Shipping condition.

Copyright©2007 LG Electronics.Inc. All right reserved. - 14 - LGE Internal Use Only

8 SSM FLAT only 29FU3 Tool is Music

9 TORBO SOUND OFF only 29FU3 Tool is ON