Bohler Ti 52

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

BÖHLER Ti 52-FD

Rutile flux cored wire, unalloyed

Classifications
EN ISO 17632-A EN ISO 17632-B AWS A5.36 AWS A5.36M
T 46 4 P M 1 H10 T554T1-1MA-UH10 E71T1-M21A4-CS1-H8 E491T1-M21A4-CS1-H8
T 42 2 P C 1 H5 T492T1-1CA-UH5 E71T1-C1A2-CS1-H4 E491T1-C1A2-CS1-H4
Characteristics and typical fields of application
All position rutile flux-cored wire with fast freezing slag system. User friendly welding characteristics
in all positions with one wire diameter 1.2 mm and same parameter setting. Excellent mechanical
properties, easy slag removal, low spatter loss, smooth, finely rippled bead surface, high X-ray
safety. The product performs to the highest productivity with significant savings in time and
economical aspects when used for positional welding.

Base materials
Steels up to a yield strength of 460 MPa (67 ksi) (shielding gas M21)
S235JR-S355JR, S235JO-S355JO, S450JO, S235J2-S355J2, S275N-S460N, S275M-S460M,
P235GH-P355GH, P275NL1-P460NL1, P215NL, P265NL, P355N, P285NH-P460NH, P195TR1-
P265TR1, P195TR2-P265TR2, P195GH-P265GH, L245NB-L415NB, L450QB, L245MB-L450MB,
GE200-GE240, Schiffbaustähle: A, B, D, E, A 32-E 36
ASTM A 106 Gr. A, B, C; A 181 Gr. 60, 70; A 283 Gr. A, C; A 285 Gr. A, B, C; A 350 Gr. LF1; A
414 Gr. A, B, C, D, E, F, G; A 501 Gr. B; A 513 Gr. 1018; A 516 Gr. 55, 60, 65, 70; A 573 Gr. 58,
65, 70; A 588 Gr. A, B; A 633 Gr. C, E; A 662 Gr. B; A 711 Gr. 1013; A 841 Gr. A; API 5 L Gr. B,
X42, X52, X56, X60, X65
Typical analysis of all-weld metal (wt.-%)
C Si Mn Ti
Wt-% 0.06 0.5 1.2 0.05
Mechanical properties of all-weld metal
Condition Yield strength Tensile strength Elongation Impact work
Re Rm A (L 0 =5d 0 ) ISO-V KV J
MPa MPa % +20 °C –20 °C –40 °C
u 500 (≥ 460) 580 (550 – 740) 26 (≥ 20) 180 130 90 (≥ 47)
u1 480 (≥ 420) 550 (500 – 670) 25 (≥ 20) 160 110 (≥ 47)
u untreated, as welded – shielding gas Ar + 15 – 25 % CO 2
u1 untreated, as welded – shielding gas 100 % CO 2
Operating data
Polarity: Shielding gases: Redrying: ø (mm)
DC ( + ) Argon + 15 – 25 % CO 2 possible, 1.2
150 °C/24 h 1.6
100 % CO 2
Welding with standard GMAW-facilities possible
Approvals
TÜV (11164.), DB (42.014.35), ABS, GL, LR, DNV, BV, CRS, CE

All information provided is based upon careful investigation and intensive research. 03/2014
However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding

You might also like