Serial-to-Ethernet connectivity, protocol conversion and protocol interoperability for industrial applications
Digi One IAP combines reliable serial-to-Ethernet connectivity Digi One IAP supports a variety of serial and Ethernet with protocol conversion and interoperability. Users can IP protocols, allowing users to bridge serial and Ethernet enable a broad range of serial devices, as well as link two devices, or both. Multi-master access allows multiple masters industrial devices. It is ideal for device management to communicate with a single slave across protocols. Digi applications requiring specific industry protocol support. One IAP converts ASCII data from serial devices to Ethernet protocols. An additional serial port can act as a pass-through Serial server functionality built into Digi One IAP allows port, allowing local devices to communicate with a slave unit any serial device to be connected to a TCP/IP network. without disrupting the serial-to-Ethernet connection. Applications may communicate with the serial device using TCP/UDP or Digi’s patented RealPort® COM port redirector for remote native COM port access.
BENEFITS APPLICATION EXAMPLE
– 1 DB-9 serial port and additional pass-through port – TCP/UDP and RealPort for COM/TTY port control and management Ethernet – Multi-master/Multi-protocol concurrent support for Allen-Bradley and Modbus protocols PLC HMI SYSTEM
– Serial and Ethernet protocol bridging support for
Allen-Bradley and Modbus protocols promotes DIGI ONE® IAP interoperability – ASCII to protocol translation for Allen-Bradley and Modbus – Switch selectable RS-232/422/485 for simple interfacing to any type of serial device – Tunable for low latency or optimized throughput RS-232/422/485
RELATED PRODUCTS
HMI Modbus Panel RTU Slave
DigiOne® IA DigiOne® DigiOne® PostServer® Power Supply
IAP HAZ SP IA TS MEI 76000736 SPECIFICATIONS Digi One® IAP FEATURES
MANAGEMENT HTTP configuration, Digi Port Authority – Remote management diagnostics and auto-discovery tool, SNMP (read/write) Telnet, Reverse Telnet, RFC2217, TCP/UDP Socket Services, PPP, DHCP/RARP, ARP-Ping, Static IP for IP address assignment, PROTOCOLS Support for 64 concurrent socket connections, ASCII, DF1, Modbus RTU/ASCII, Modbus/TCP, EtherNet/IP, Allen-Bradley Ethernet SOFTWARE Patented RealPort for COM/TTY ports
SECURITY SSHv2, SSL, TLS, HTTPS
AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, OPERATING SYSTEMS Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent. STATUS LEDs Serial signals, Power, Ethernet, Diagnostics
DIMENSIONS (L x W x D) 4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm)
WEIGHT 2.5 oz (64.0 g)
OTHER Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting
INTERFACES
SERIAL PORTS 1 RS-232/422/485 (switch selectable)
SERIAL CONNECTOR Screw terminal connectors or DB-9M; DB-9M can act as a second direct RS-232 port connection when used as the second port
SERIAL THROUGHPUT Up to 230 Kbps
ETHERNET PHYSICAL LAYER 10/100Base-T
POWER REQUIREMENTS
POWER INPUT 9-30 VDC @ 0.5Amps max
POWER SUPPLY Removable screw terminal for power (power supply not included) PRODUCT SURGE PROTECTION 2 kV isolation between power supply and serial ground product when used with Digi power supply (ESD) ENVIRONMENTAL
OPERATING TEMPERATURE 0º C to 60º C (32º F to 140º F)
RELATIVE HUMIDITY 5% to 90% (non-condensing)
ETHERNET ISOLATION 1500 VAC min per IEEE 802.3/ANSI X3.263
SERIAL PORT PROTECTION (ESD) 15 kV human body model
REGULATORY APPROVALS
SAFETY UL 1950, UL 1604 (Class 1, Div. 2), CSA 22.2 No 950, EN60950
EMISSIONS / IMMUNITY FCC Part 15 (Class A), ICES-003 (Class A), CE, AS3548, EN6100-6-2 + EN55024, EN55022 (Class A)
PDF Web Application Development with Streamlit: Develop and Deploy Secure and Scalable Web Applications to the Cloud Using a Pure Python Framework 1st Edition Mohammad Khorasani download
