Configuring Routour PDF
Configuring Routour PDF
Note: If you are seeing difference in the interface and the screenshots in this post, then you might be using the newer version
of this modem See here: How to Configure D-Link DSL 2730U modem (New Version)
This guide shows step by step guide to configure your D-Link DSL-2730U for BSNL Broadband. This include the normal setting
which can also be applied to the other routers. Just follow the few steps to configure your modem
Step 1: Open http://192.168.1.1 in your web browser and login using your username password or by default it is admin
(username) and admin(password)
Step 2: Click on Advanced Setup > Layer2Interaface> ATM Interface> Click Add
Step 3 : Put the following values(As shown in the below image). and click Apply/Save
Step 4: Now click on WAN Service and click add
Step 5 :Select the Layer2 Interface which you have created in the previous step, Click Next
Step 5: Ensure the following Settings
Step 6: Write Your Username and password. In the PPPoE Service Name box put the value “dataone“, Click Next
Step 7 : Select the gateway ppp0, Click Next
Step 7: Now in the DNS Server Configuration page move ppp0 interface to the “Selected DNS sever Interfaces”, Click Next
Back to Home
FEATURED LONG TERM REVIEW: REDMI NOTE 4 WITH HOW TO CONNECT TWO ROUTERS WITH ONE
LINEAGEOS BSNL BROADBAND CONNECTION
HOW TO GUIDES
NEWS THINGS YOU SHOULD DO AFTER THE FIRST DECREASING WIFI SIGNAL IN D-LINK DSL
BOOT OF YOUR ANDROID PHONE 2730U
OPINION
© MEIBLE.COM 2012-2017