Scribd
Upload
121 views15 pages

Solved Problems in Flexible Transmitting Elementsss

solve

Uploaded by

morolosus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF or read online on Scribd
121 views15 pages

Solved Problems in Flexible Transmitting Elementsss

solve

Uploaded by

morolosus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF or read online on Scribd
You are on page 1/ 15
A belt drive is to be designed for F;/F, =3, while transmitting 60 hp at 2700 rpm. of the driver D,; m, = 1.85; use a medium double belt, cemented joint, a squirrel-cage, compensator-motor drive with mildly jerking loads; center distance is expected to be about twice the diameter of larger pulley. (a) Choose suitable iron-pulley sizes and determine the belt width for a maximum permissible 8 = 300 psi. (b) How does this width compare with that obtained by the ALBA procedure? (c) Compute the maximum stress in the straight port of the ALBA belt. (d) If the belt in (a) stretches until the tight tension F, =525/b.. what is RIP? Solution: (a) Table 17.1, Medium Double Ply, Select D, =7 in. min. — Dan, _ 2(7)2700) _ “D2 12 4948 fpm 4000 fpm < 4948 pm < 6000 fpm , 3,000 oo= (F- F,)'4948) 33.000 F,-F,=4001b For cemented joint, = 1.0 00 psi F, = 600= (300) > == oof b=6.4in say b=6.5in (b) ALBA Procedure hp =(hp/in. Table 17.1WbC,C,NC,C,, ~~) Table 17.1, v, =4948 fpm Medium Double Ply hpfin= 12.448 Table 17.2 Squirrel cage, compensator, starting 7 Jerky loads, C, =0.83 2.4.48)(6)(0.67)(0.6)0.83) 4.5 in say b=15 in A 20-hp, 1750 rpm, slip-ring motor is to drive a ventilating fan at 330 rpm. The horizontal center distance must be about 8 to 9 ft for clearance, and operation is continuous, 24 hr./day. (a) What driving-pulley size is needed for a speed recommended as about optimum in the Text? (b) Decide upon a pulley size (iron or steel) and belt thickness, and determine the belt width by the ALBA tables. (c) ‘Compute the stress from the general belt equation assuming that the applicable coefficient of friction is that suggested by the Text. (d) Suppose the belt is installed with an initial tension F, =70lb/in. (§17.10), compute F,/F, and the stress on the tight side if the approximate relationship of the operating tensions and the initial tensions is Solution ¥, = 4000 10 4500 fom assume v,, = 4250 fm Din 2 20,750) 2 D,=9.26in say D,=10in 4250: (b) Using Heavy Double Ply Belt, ¢ Minimum pulley diameter for v,, = 4250 fpm , D, =10in Use D, =10in _ Dn, _ (101750) . Se gg ASS em ALBA Tables hp=(hpjin, Table 17.10C,C, NC, C,,-) Ipfin=138 Slip ring motor, C, =0.4 Pulley Size, D, =10in c,=07 ‘Table 17.7, 24 hnfday, continuous Ng Assume C, =0.74 13.8)(6¥0.4)0.7)0.74)

You might also like