Scribd Logo
Upload

Welcome to Scribd!

  • 871 views

    Trainees Progress Sheet

    Uploaded by

    Emil D. Padullon
    Bryan Rodica is undergoing training to qualify for the EIM NC-II qualification over 154 hours under trainer Mr. Emelito Padullon. The progress sheet details the 3 units of competency covered, including performing roughing-in, wiring and cabling works, installing electrical protective devices, and installing wiring devices. For each unit, the associated training activities, durations, dates of training and ratings are recorded. The trainee and supervisor must sign off on the completed training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Trainees Progress Sheet

    Uploaded by

    Emil D. Padullon
    871 views3 pages
    Bryan Rodica is undergoing training to qualify for the EIM NC-II qualification over 154 hours under trainer Mr. Emelito Padullon. The progress sheet details the 3 units of competency covered, including performing roughing-in, wiring and cabling works, installing electrical protective devices, and installing wiring devices. For each unit, the associated training activities, durations, dates of training and ratings are recorded. The trainee and supervisor must sign off on the completed training.

    Original Description:

    list of Trainess Progress sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bryan Rodica is undergoing training to qualify for the EIM NC-II qualification over 154 hours under trainer Mr. Emelito Padullon. The progress sheet details the 3 units of competency covered, including performing roughing-in, wiring and cabling works, installing electrical protective devices, and installing wiring devices. For each unit, the associated training activities, durations, dates of training and ratings are recorded. The trainee and supervisor must sign off on the completed training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    871 views3 pages

    Trainees Progress Sheet

    Uploaded by

    Emil D. Padullon
    Bryan Rodica is undergoing training to qualify for the EIM NC-II qualification over 154 hours under trainer Mr. Emelito Padullon. The progress sheet details the 3 units of competency covered, including performing roughing-in, wiring and cabling works, installing electrical protective devices, and installing wiring devices. For each unit, the associated training activities, durations, dates of training and ratings are recorded. The trainee and supervisor must sign off on the completed training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    TRAINEE’S PROGRESS SHEET

    Name : BRYAN RODICA Trainer : Mr. Emelito D. Padullon


    Qualification : EIM NC-II Nominal Duration : 154 hrs
    Training Activity Training Date Supervisor’s
    Unit of Competency Duration Started Date Rating Trainee’s Initial
    Finished Initial
    1. Perform 1.1 Install
    roughing-in, electrical
    wiring and cabling metallic/non-
    works for single- metallic (PVC
    phase conduit)
    distribution, 1.2 Install wire
    power, lighting, ways and cable
    and auxiliary tray
    systems
    1.3 Install
    auxiliary
    terminal cabinet
    and distribution
    panel

    1.4 Prepare for


    cable pulling and
    installation

    document #:
    CBLM on date developed: Issued by:
    Trainers Methodology Level 1 November 2018 Subic Bay Colleges, Inc. page 1of3
    EIM NC-II developed by:
    E.D. PADULLON
    date modified:
    modified by: revision #:00
    Unit of Competency Training Activity Training Date Date Rating Trainee’s Supervisor’s
    Duration Started Finished Initial Initial
    1.5 Perform
    wiring and
    cabling lay-out

    1.6 Notify
    completion of
    work
    2. Install 2.1 Plan and 8hrs December December COMPETENT
    electrical prepare work 15, 2018 15, 2018
    protective devices 2.2 Install December December
    for distribution electrical 16hrs 16-17, 17, 2018
    power, lighting, protective 2018
    auxiliary, devices
    lightning 2.3 Install December December
    protection and lighting fixture 16hrs 18-19, 19, 2018
    grounding and auxiliary 2018
    systems outlet
    2.4 Notify December December
    completion of 4hrs 20, 2018 20, 2018
    work

    .3. Install wiring 3.1 Select wiring

    document #:
    CBLM on date developed: Issued by:
    Trainers Methodology Level 1 November 2018 Subic Bay Colleges, Inc. page 2of3
    EIM NC-II developed by:
    E.D. PADULLON
    date modified:
    modified by: revision #:00
    devices of floor devices
    and wall mounted
    outlets, lighting
    fixture/switches
    and auxiliary
    outlets
    3.2 Install wiring
    devices
    3.3 Install
    lighting
    fixtures/switche
    s
    3.4 Notify
    completion of
    work
    Average
    Total
    Note: The trainee and the supervisor must have a copy of this form. The column for rating maybe used either by giving a
    numerical rating or simply indicating competent or not yet competent. For purposes of analysis, you may require industry
    supervisors to give a numerical rating for the performance of your trainee’s. Please take note however that in TESDA, we
    do not use numerical ratings.

    document #:
    CBLM on date developed: Issued by:
    Trainers Methodology Level 1 November 2018 Subic Bay Colleges, Inc. page 3of3
    EIM NC-II developed by:
    E.D. PADULLON
    date modified:
    modified by: revision #:00

    You might also like