77001-00001 Reach PDF

SAFTY DATA SHEET
Acc to Regulation (EU) 1907/2006 (REACH)

SOLVENT
77001-00001
1. IDENTIFICATION OF PRODUCT AND COMPANY
Product name : 77001-00001, Solvent for INK

Use of the substance/preparation: Solvent for industrial ink jet printers (CIJ-printers)
Supplier : Paul Leibinger GmbH & Co. KG
Daimlerstr. 14
78532 Tuttlingen
Germany
Phone: +49 7461 92 86-0 Fax: +49 7461 92 86-199
www.leibinger-group.com
2. COMPOSITION / INFORMATION ON INGREDIENTS
Classification
F; R11
Xi; R36
R-phrases
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
Special hazards information for humans and environment

Highly flammable.
In use, may form flammable/explosive vapour-air mixture.
3. HAZARDS IDENTIFICATION
Hazardous ingredients
CAS-Nr. EC-No. Component weight.-% R-phrases
78-93-3 201-159-0 Butanone (MEK) >95 F R11
Xi R36, 66, 67
4. FIRST AID MEASURES
General information
Remove contaminated soaked clothing immediately.
In the event of persistent symptoms receive medical treatment.
Take affected person into fresh air.
Take away from danger area and lay down affected person.
In case of inhalation
Ensure of fresh air.
In the event of symptoms refer for medical treatment.
In case of skin contact
In case of contact with skin wash off with soap and water.
Consult a doctor if skin irritation persists.
In case of eye contact
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
Rev.: December 5th, 2008 Page 1/5 Solvent 77001-00001

In case of ingestion
Refer to medical treatment.
Physician's information / possible symptoms
In case of inhalation of plenty of solvent-containing fumes the following symptoms may occur:
Unconsciousness
Depression of central nervous system
Confusion
Physician's information / possible dangers
In case of severe poisoning depressions of central nervous system, hypotension, bradycardia and
hypothermia may occur.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media

Alcohol-resistant foam
Dry powder
Carbon dioxide
Water spray jet
Special exposure hazards arising from the substance or preparation itself, combustion products,
resulting gases
Carbon monoxide (CO)
Carbon dioxide (CO2)
Special protective equipment for fire-fighters
Use breathing apparatus with independent air supply.
Additional information
Fire residues and contaminated firefighting water must be disposed of in accordance with the local
regulations.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Ensure adequate ventilation.
Use personal protective clothing.
Keep away sources of ignition.
Environmental precautions
Do not discharge into the drains or bodies of water..
Do not seep away runed out product into ground or body of water.
Do not discharge into the subsoil/soil.
Methods for cleaning up
Take up with absorbent material (e.g. sand, kieselguhr, acid binder, general-purpose binder, sawdust).
Additional Information
Informations for disposal see chapter 13.
7. HANDLING AND STORAGE
Advice on safe handling

Take measures against electrostatically charging.
Provide good room ventilation even at ground level (vapours are heavier than air).
Take the usual precautions when handling with chemicals.
Advice on protection against fire and explosion
Keep away from sources of ignition - No smoking
The product is easy combustible.
Take precautionary measures against static discharges.
Formation of explosive gas mixtures in air.

Requirements for storage rooms and vessels
Keep in closed original container.
Ventilate store-rooms thoroughly.
Advice on storage compatibility
Do not store together with food.
Do not store together with oxidizing agents.
Store at cool and aired place and at distance to acids and alkalies.
Further information on storage conditions
Keep container tightly closed and store at cool and aired place.
Protect from light.
Do not keep long-term to heat.
Storage temperature between 10°C to 30°C (=50°F to 86°F).
Keep in a cool place, heat causes increase in pressure and risk of bursting.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
CAS-Nr. Name Code [mg/m³] [ppm] Remark

78-93-3 butanone 8 hours 600 200
Short-time 900 300
Respiratory protection
Breathing apparatus in the event of high concentrations.
Hand protection
Gloves (solvent-resistant)
Eye protection
tightly fitting goggles
General protective measures
Do not inhale vapours.
Avoid contact with the skin.
Hygiene measures
Do not eat or drink when working.
Remove soaked clothing immediately.
After work wash thoroughly.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Liquid
Colour: Colourless, clear
Odour: Ketonlike
Boiling point: >79 °C.
Vapour pressure: < 110 kPa @ 50 °C ( = 122 F )
Density: ~ 0,80g/cm³ @ 20°
Flash point: - 4 °C (Method: DIN 51755)
Ignition temperature: 505 °C
Explosion limits: lower – 1,8 Vol-%
upper – 11,5 Vol-%
Additional information
Vapours are heavier than air.
flammable liqiud
10. STABILITY AND REACTIVITY
Conditions to avoid
Reactions with acids and strong oxidising agents.
Reactions with alkalies.
Hazardous decomposition products
carbon monoxide and carbon dioxide
Thermal decomposition
Remark No decomposition if used as directed.

11. TOXICOLOGICAL INFORMATION
Acute toxicity/Irritability/Sensitization
Value/Validation Species Method Remark
LD 50 acute oral > 2600 mg/kg rat
LD 50 acutedermal > 8000 mg/kg rabbit
LC 50 acuteinhalation 20 mg/l (4 h) rat
Experiences made from practice

May be absorbed through the skin.
Experiences at humans: may cause hypersensitivity reactions on skin in case of persons suffering from
hypersensitivity.
Sensitization through skin contact possible.
Has a degreasing effect on the skin.
Irritates respiratory tract.
Inhalation causes headache/nausea.
Irritates mucous membranes.
Inhalation causes narcotic effect/intoxication.
12. ECOLOGICAL INFORMATION
Data on elimination (persistence and degradability)

Elimination rate Method of analysis Method Validation
Physicochemical degradability > 50 % COD decrease
Biologicaldegradability The product is biodegradable.
General regulation
Do not allow uncontrolled leakage of product into the environment.
Product is not allowed to be discharged into the ground water or aquatic environment.
Product is not allowed to be discharged into aquatic environment, drains or sewage treatment plants.
13. DISPOSAL CONSIDERATIONS
Waste code No. Name of waste

08 03 12* waste ink containing dangerous substances
Wastes marked with an asterisk are considered to be hazardous waste pursuant to Directive 91/689/EEC on
hazardous waste.
Recommendations for the product
Collect waste separated in suitable, labeled and lockable containers.
Product rests: send for disposal, e.g. special waste incineration.
Recommendations for packaging
Totally emptied packaging may be treated as household waste.
14. TRANSPORT INFORMATION
Land and inland navigation transport ADR/RID

UN 1210 PRINTING INK RELATED MATERIAL, 3, II
Marine transport IMDG
Air transport ICAO/IATA-DGR
Transport/further informations
Regulations concerning free quantities are to be observed.

15. REGULATORY INFORMATION
Classification
F Highly flammable
Xi Irritant
R-phrases
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
S-phrases
16 Keep away from sources of ignition - No smoking.
24/25 Avoid contact with skin and eyes.
33 Take precautionary measures against static discharges.
7 Keep container tightly closed.
Hazardous ingredients for labeling

butanone
VOC standard
VOC value -800 g/L
16. OTHER INFORMATION
Recommendend uses and restrictions

National and local regulations concerning chemicals shall be observed.
Further information
The information contained herein is based on the state of our knowledge. It characterizes the product with
regard to the appropriate safety precautions. It does not represent a guarantee of the poperties of the
product.
Wording of the R-phrases specified in chapter 3 (not the classification of the formulation!)
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.
The protruding information is based on the contemporary state of knowledge; however, they represent no assertion from product
qualities and also establish no contractual right circumstance. The product is determined for the industrial workmanship / use.
Existing laws and regulations are to be considered by customer of our products in own responsibility.

77001-00001 Reach PDF

Uploaded by

Copyright:

Available Formats

77001-00001 Reach PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

77001-00001 Reach PDF

Uploaded by

Copyright:

Available Formats

SAFTY DATA SHEET

Acc to Regulation (EU) 1907/2006 (REACH)

1. IDENTIFICATION OF PRODUCT AND COMPANY

Product name : 77001-00001, Solvent for INK

2. COMPOSITION / INFORMATION ON INGREDIENTS

Special hazards information for humans and environment

4. FIRST AID MEASURES

Rev.: December 5th, 2008 Page 1/5 Solvent 77001-00001

Suitable extinguishing media

6. ACCIDENTAL RELEASE MEASURES

7. HANDLING AND STORAGE

Advice on safe handling

Rev.: December 5th, 2008 Page 2/5 Solvent 77001-00001

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

CAS-Nr. Name Code [mg/m³] [ppm] Remark

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

Rev.: December 5th, 2008 Page 3/5 Solvent 77001-00001

Experiences made from practice

12. ECOLOGICAL INFORMATION

Data on elimination (persistence and degradability)

Biologicaldegradability The product is biodegradable.

13. DISPOSAL CONSIDERATIONS

Waste code No. Name of waste

14. TRANSPORT INFORMATION

Land and inland navigation transport ADR/RID

Rev.: December 5th, 2008 Page 4/5 Solvent 77001-00001

Hazardous ingredients for labeling

16. OTHER INFORMATION

Recommendend uses and restrictions

Rev.: December 5th, 2008 Page 5/5 Solvent 77001-00001

You might also like