Scribd Logo
Upload

Welcome to Scribd!

  • 973 views

    Andritz Pellet Mill Type Pm30

    Uploaded by

    sarah ahmed
    The document describes a PM30 pellet mill. It has a robust design for high performance and low operating costs. Key features include a double-reduction gearbox for optimum die speeds, pressurized gearbox lubrication, and a vibration-free belt drive transmission. The pellet mill has tapered dies, replaceable wear rings, and wide press rolls. Safety features include a shear pin system and safety switch. It has a compact profile and built-in hoist.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Andritz Pellet Mill Type Pm30

    Uploaded by

    sarah ahmed
    973 views2 pages
    The document describes a PM30 pellet mill. It has a robust design for high performance and low operating costs. Key features include a double-reduction gearbox for optimum die speeds, pressurized gearbox lubrication, and a vibration-free belt drive transmission. The pellet mill has tapered dies, replaceable wear rings, and wide press rolls. Safety features include a shear pin system and safety switch. It has a compact profile and built-in hoist.

    Original Description:

    ANDRITZ Feed and Biofuel brochures

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a PM30 pellet mill. It has a robust design for high performance and low operating costs. Key features include a double-reduction gearbox for optimum die speeds, pressurized gearbox lubrication, and a vibration-free belt drive transmission. The pellet mill has tapered dies, replaceable wear rings, and wide press rolls. Safety features include a shear pin system and safety switch. It has a compact profile and built-in hoist.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    973 views2 pages

    Andritz Pellet Mill Type Pm30

    Uploaded by

    sarah ahmed
    The document describes a PM30 pellet mill. It has a robust design for high performance and low operating costs. Key features include a double-reduction gearbox for optimum die speeds, pressurized gearbox lubrication, and a vibration-free belt drive transmission. The pellet mill has tapered dies, replaceable wear rings, and wide press rolls. Safety features include a shear pin system and safety switch. It has a compact profile and built-in hoist.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PELLET MILL

    TYPE PM30

    The unique PM30 pellet mill of a robust and easy-to-maintain design for high
    performance and low operating costs is made especially for very demanding wood
    pelleting tasks.
    The PM30 pellet mill is equipped with a highly efficient are supplied with sturdy spherical roller bearings to
    double-reduction gearbox, allowing optimum die speeds withstand heavy loads. The roller shaft, suspended at both
    to be achieved at high working loads. ends, is supplied with symmetrically placed water cooling
    The pressurized gearbox oil lubrication system with air- channels and thermo-sensor for temperature surveillance
    cooling is standard. of roller bearings. Roll adjustment is checked through
    The high-speed belt drive transmission between main inspection hatches.
    motor and gearbox provides a vibration-free transmission
    of power to the gearbox. Safety stop
    The pellet chamber door is a heavy-duty unit mounted on The shear pin system integrated with the roll adjustment
    a motorized frame for easy access to the pellet chamber. spindle protects the shaft against damage from seizing
    The inner side of the pellet chamber door is provided due to tramp metal. A safety switch stops the mill via the
    with replaceable stainless steel protection plates. control, when the shear pin breaks, and the roll is thrown
    The distribution of the product to the press rolls is back.
    achieved by separate inlet screws, one for each press
    roll, mounted on the pellet chamber door. Compact profile
    Small footprint makes the mill easy to fit into any facility.
    Taper fit die
    The pellet mill has an operation-friendly conical, bolt- Built-in hoist
    suspended die of high-quality steel. The auto-piloting The built-in hoist with lifting tools facilitates the change of
    effect makes die change smooth and easy. Once the die die and rolls.
    has been aligned with the housing, only the final three
    millimetres require full power torque on the die bolts Optional accessories
    to complete the press fit. The die is symmetrical and • Automatic grease lubrication system for press roll
    turnable. bearings and roller main shaft bearing.
    • Pt100 temperature sensors mounted in two press rolls
    Replaceable wear rings for remote reading of roll temperatures.
    The die main shaft and the reinforcement ring are • Water cooling of roller shaft.
    supplied with replaceable wear rings. • Conditioner with steam addition provides optimum
    retention time for specific capacity requirements.
    Press roll design • Computerized control system for process optimization.
    Wide rolls with turned edges and a narrow track width

    249 GB
    FEED & BIOFUEL DIVISION
    PELLET MILL TYPE PM30

    Technical data         
    Up to 50 Hz/60 Hz
    Main motor   350 HP
          315 kW    1480/1780 rpm
    Inlet screw Stainless steel 2.2 kW 3 HP 750 rpm
    Oil pump 1.5 kW 2 HP
    Oil cooler 0.25 kW 0.35 HP
    Die Dimension Inner diameter   Ø 850 mm  
      Effective press width 134 mm
    Effective press area 0.36 m2
    Velocity Belt coupled coupled, 4-pole, 50 Hz 1480 rpm from 3.5 m/sec.
    Numbers     2
    Press rolls Water cooling
        Outer roll diameter     400 mm
      Incl. main motor     10200 kg
    Total weight
        Incl. main motor and conditioner     11800 kg

    Technical data, optional equipment


    Feed screw Stainless steel Freq. controlled gear motor 2.2 kW 3 HP 750 rpm
    Motor 11.0 kW 15 HP 750/900 rpm
    Conditioner Type CM30/901 Volume 750 litres
    Number of steam inlets 9 x 1"

    Subject to change without notice.


    ADit 0409

    ANDRITZ FEED & BIOFUEL A/S · TeI. +45 72160 300 · [email protected] · ANDRITZ FEED & BIOFUEL B.V. The Netherlands · Tel. +31 40 2627777 · [email protected]
    ANDRITZ FEED & BIOFUEL, Division of Andritz S.A.S., France · Tel. 33247506364 · [email protected] · ANDRITZ FEED & BIOFUEL Ltd. England · Tel. +44 1482825119 ·
    [email protected] ·ANDRITZ FEED & BIOFUEL eine Zweigniederlassung der Andritz GmbH . Germany· Tel. +49 2104 9197-0 · [email protected] · ANDRITZ FEED & BIOFUEL
    Divsion Of Andritz Inc. Usa · Tel. +1 5705468211 · [email protected] · ANDRITZ FEED & BIOFUEL, Rep. Office Venezuela · Venezuela · Tel. +58 241 8422515 · [email protected] ·
    ANDRITZ FEED & BIOFUEL, Division of Andritz Hydro S.A. de C.V., Mexico · Tel. +52 (229) 178 3669 · [email protected] · ANDRITZ FEED & BIOFUEL, Brazil Ltda. Brazil · Tel. +55 51 3333 0128 ·
    [email protected] · ANDRITZ FEED & BIOFUEL, Chile Ltda., Chile · Tel.: +56 2214 5711 · [email protected] · ANDRITZ FEED & BIOFUEL Divsion Of Andritz Pty Ltd. Australia · 249 GB
    Tel. +61 3 8795 9800 · [email protected] · ANDRITZ FEED & BIOFUEL Division Of Andritz Technologies Ltd. P.R. China · Tel: +86 21 64670285 · [email protected]

    You might also like