Scribd
Upload
168 views1 page

Epec 2021 Hub Unit: Product Order Code

.

Uploaded by

Joao Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views1 page

Epec 2021 Hub Unit: Product Order Code

.

Uploaded by

Joao Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Epec 2021 Hub Unit

Epec 2021 Hub Unit is a compact and robust communication and


control unit for mobile machines. Small outside dimensions and
robust construction with IP67 classification makes installing easy.

Star topology in CAN bus is not often seen in embedded control


systems, but with the 2021 Hub Unit it is used to further increase
the safety and reliability of the embedded control system. With
the help of the hub unit, the system designing and installing is
easy as the hub distributes both CAN bus and the power supply
for the whole control system. This enables extra safety features
to be built into the system as the hub unit is able to monitor
the condition of the communication and power supply wiring, as
well as the power consumption of the whole system. When the
system power is distributed via the hub unit, it is able to protect
more sensitive devices connected to it from e.g. overvoltage
peaks. With its versatile CAN connections, the 2021 Hub Unit withdraws
the need for separate CAN gateway units in the control system,
The Hub Unit is PLCopen programmable and also has some as the Hub Unit itself is able to act as a gateway between
digital inputs and outputs which can be used to connect all the different CAN buses.
surrounding devices to it.
The unique design of the 2021 Hub Unit, as with other Epec
Epec 2021 Hub Unit has two CAN bus connections spread into control units gives them excellent endurance against impacts and
five connectors available to connect all common CAN devices mechanical wear.
with it. CAN connections are CANopen® compatible and user
programmable, located securely in gold plated AMPSEAL Product order code E30B2021-10
connectors. The hub unit can also be used to connect e.g. SAE
J1939 devices; engines, transmissions, etc. with the embedded sae j1939 e17 100g
control system. In addition to the CAN bus interface, the hub
unit provides serial communication (RS485) interface for other
devices.

hub unit 2021


processor C167 20 MHz application size 256 kbyte programming CoDeSys 2.3
protection class IP67 size 147 x 113 x 46 mm weight 0,7 kg
nominal operating voltage 12/24 VDC full operating range 10 ... 30 VDC
overvoltage protection 70 VDC operating temperature -40 ... +70°C
connectors 1 x AMP23 4 x AMP8 i/o interface, configuration example 6 x DI/PI 4 x PWM/DO/DI/PI 2 x AI/DI
i/o pins total 12 communications 7 or 8 x CAN1 1 or 2 x CAN2 1 x RS485

You might also like