CP 710
CP 710
CP 710
Konstantynowska 79/81
95-200 Pabianice
tel/fax 48 42 2270971 POLAND FUNCTIONING
e-mail: fif@fif.com.pl
Lower voltage value (U1) and upper voltage value (U2) are set
by means of potentiometers. It is so-called eye of voltage, in
CP-710 limits of which can occur changes of phases voltages that do not
VOLTAGE RELAYS cause activation of relay. Supplied a relay is signalized by shine
of green LED .Correct value of voltage is signalized by shine of
one-phase type yellow LED.( position of joint 7-10). Change of phase voltage on
one of phases above or below set voltage tresholds will cause
activation of relay (switch joints to position 7-12). Decrease of
voltage below establish value U1 is signalized by shine of LED
red (U1). Increase of voltage below establish value U2 is
5 9 0 8 3 1 2 5 9 7 1 0 0 >
signalized by shine of LED red (U2). Reactivation follows
automatically return of correct voltage value.
www.fif.com.pl The relay can be supplied with a voltage up to 450V~. This
ensures the effective protection of the receiver even in case of a
F&F products are covered by an 24 months warranty from date of purchase
voltage increase beyond allowable standards. Also, in case of
supply polarity exchange or when "zero" is switched off (for
PURPOSE three-phase types) the relay will not be destroyed ("burned").
WIRING DIAGRAM
ASSEMBLY
for U2 0,1sec U U1
recovery time CP-710
240 250
for U1 1,5sec
for U2 1,5sec Ç
230 260
U2[V]
195
A090504