INTERACTIVE SCHEMATIC

Bookmarks X
*This document is best viewed at a
Options
screen resolution of 1024 X 768.
Features
Cover Page
To set your screen resolution do the following:
Tables RIGHT CLICK on the DESKTOP.
Component Select PROPERTIES.
Connector
CLICK the SETTINGS TAB.
Schematic
Machine Views
MOVE THE SLIDER under SCREEN RESOLUTION
Chassis View until it shows 1024 X 768.
Cab View CLICK OK to apply the resolution.
Engine View
*Due to different monitor sizes and PDF reader preferences
The Bookmarks panel will allow you to there may be some variance in linked schematic locations
quickly navigate to points of interest.

Click here to save a copy of

EC-C2 E-C60 this interactive schematic
EC-C3
to your desktop
E-C61

VIEW ALL CALLOUTS

EC-C1
When only one callout is showing on a
machine view, clicking on this button will
Click on any text that is BLUE and make all of the callouts visible. This
underlined. These are hyperlinks button is located in the top right corner
that can be used to navigate the of every machine view page.
schematic and machine views.

ELECTRICAL SYMBOLS BASIC HYDRAULIC

HOTKEYS (Keyboard Shortcuts) COMPONENT SYMBOLS
T

Pressure Temperature Level Flow

Switch Switch Switch Switch Circuit Breaker Pump
Variability
FUNCTION KEYS or Motor

Click here to view the

Spring
Zoom In “CTRL” / “+” Schematic Symbols
Fluid
Conditioner (Adjustable)

Zoom Out “CTRL” / “-” and Definitions page

Fit to Page “CTRL” / “0” (zero)

Hand Tool “SPACEBAR” (hold down)
Find “CTRL” / “F”
Search “CTRL” / “SHIFT” / “F”
SCHEMATIC SYMBOLS AND DEFINITIONS

VALVES INTERNAL PASSAGEWAYS PUMPS BASIC HYDRAULIC

ENVELOPES FLOW IN ONE
DIRECTION
FLOW ALLOWED IN
EITHER DIRECTION
PARALLEL
FLOW
CROSS
FLOW
FIXED DISPLACEMENT
COMPONENT SYMBOLS

One Position Two Position Three Position Unidirectional Bidirectional Pump

Infinite Two Three Variability
Positioning Position Position or Motor
PORTS VARIABLE DISPLACEMENT
NON- COMPENSATED

CYLINDERS Fluid Spring

(Adjustable)
Two-way Three-Way Four-Way Conditioner
Unidirectional Bidirectional
CONTROL
AB
MOTORS
AB
Single Acting Double Acting
Pressure
FIXED DISPLACEMENT Spring
P T P T Compensation
Normal Position Shifted Position Infinite Position

CHECK
ACCUMULATORS Unidirectional Bidirectional Control Line Restriction
Valves (Variable)
VARIABLE DISPLACEMENT
Basic Spring Shuttle NON- COMPENSATED
Pilot
Symbol Loaded Line Restriction
Controlled Spring Loaded Gas Charged Restriction
(Fixed)

Unidirectional Bidirectional

MAIN AUX.

PILOT CONTROL
Line Restriction 2-Section
RELEASED PRESSURE ROTATING SHAFTS Variable and Pressure
Compensated
Pump

Unidirectional Bidirectional
External Return Internal Return
Attachment Pump: Variable and
REMOTE SUPPLY PRESSURE Pressure Compensated

Internal Hydraulic Pneumatic

Simplified Complete Supply Pressure Energy Triangles

COMBINATION CONTROLS
LINES MEASUREMENT

Solenoid Solenoid Solenoid Solenoid and Servo Thermal Detent Crossing Joining
or Manual and Pilot Pilot or Manual Pressure Temperature Flow

MANUAL CONTROL FLUID STORAGE RESERVOIRS

Push-pull Lever Manual Shutoff General Manual Push Button Pedal Spring Vented Pressurized Return Above Fluid Level Return Below Fluid Level

HYDRAULIC SYMBOLS - ELECTRICAL ELECTRICAL SYMBOLS

G
M T

Pressure Temperature Level Flow

Transducer Transducer Generator Electric Pressure Pressure Switch Temperature Electrical
Switch Switch Switch Switch Circuit Breaker
(Fluid) (Gas / Air) Motor Switch (Adjustable) Switch Wire

BASIC ELECTRICAL COMPONENT SYMBOLS HARNESS AND WIRE SYMBOLS

Wire, Cable, or Harness Assembly Identification:
Fuse: A component in an electrical circuit that will open the circuit if too much current flows through it. Includes Harness Identification Letters and Harness
Connector Serialization Codes (see sample).
Switch (Normally Open): A switch that will close at a specified point (temp, press, etc.). The circle indicates
that the component has screw terminals and a wire can be disconnected from it.
AG-C4 L-C12
Switch (Normally Closed): A switch that will open at a specified point (temp, press, etc.). 111-7898 3E-5179
No circle indicates that the wire cannot be disconnected from the component. Part Number: for 1
Connector Plug
Ground (Wired): This indicates that the component is connected to a grounded wire. 2
The grounded wire is fastened to the machine.
Plug Receptacle
Pin or Socket Number
Ground (Case): This indicates that the component does not have a wire connected to ground.
It is grounded by being fastened to the machine. Harness Identification Letter(s): (A, B, C, AA, AB, AC, ...)

Reed Switch: A switch whose contacts are controlled by a magnet. A magnet closes the contacts of Harness Connector Serialization Code: The "C" stands for
"Connector" and the number indicates which connector in the
a normally open reed switch; it opens the contacts of a normally closed reed switch.
harness (C1, C2, C3, ...)
L-C12
Sender: A component that is used with a temperature or pressure gauge. 3E-5179
The sender measures the temperature or pressure.
T Its resistance changes to give an indication to the gauge of the temperature or pressure. 5A
Component
Relay (Magnetic Switch): A relay is an electrical component that is activated by electricity. Fuse (5 Amps) 9X-1123 Part Number
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close the switch part of the relay. 325-AG135 PK-14
Harness identification code:
This example indicates wire group 325, Wire Gauge
Solenoid: A solenoid is an electrical component that is activated by electricity. wire 135 in harness "AG". Wire Color
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close a valve or move a piece of metal that can do work. 1 Deutsch connector: Typical representation
of a Deutsch connector. The plug contains all
2 sockets and the receptacle contains all pins.
Magnetic Latch Solenoid: An electrical component that is activated by electricity and held latched by a
permanent magnet. It has two coils (latch and unlatch) that make electromagnet 1 Sure-Seal connector: Typical representation
when current flows through them. It also has an internal switch that places of a Sure-Seal connector. The plug and receptacle
2 contain both pins and sockets.
the latch coil circuit open at the time the coil latches.
 UENR3952-02
July 2016

216B3, 226B3, 236B3, 242B3, 247B3,

252B3, 257B3, and 259B3
Skid Steer Loader, Multi-terrain Loader,
and Compact Track Loader
Hydraulic System
216B3: 226B3: 236B3: 242B3:
PWK1-UP SNA1-UP A9H1730-UP SRS1330-UP
JXM2283-UP MWD3011-UP
DSN1-UP DXZ1-UP
HR21-UP AS21-UP
CD31-UP

247B3: 252B3: 257B3: 259B3:

ESL1-UP TNK1162-UP B7H1036-UP YYZ2038-UP
TSL946-UP
KB31-UP

Volume 1 of 2: Base Machines

Volume 2 of 2: Hydraulic Options

© 2016 Caterpillar CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, and the POWER EDGE trade dress as well as
All Rights Reserved corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
COMPONENT LOCATION
Volume 1 of 2 - BASE MACHINES
Part Schematic Machine
Description
Number Location Location
Accumulator 149-0686 D-1 1
Cooler As - Radiator (216) 361-4662
Cooler As - Radiator (226/247) 361-4663 C-1 2
Cooler As - Radiator (236/242/252/257/259) 361-4665
Coupling - Female 193-8335 F-2 3
Coupling - Male 193-8334 F-2 4
Cylinder Gp - Lift (Left Hand) (216/226/247) 293-5706
Cylinder Gp - Lift (Left Hand) (236) 295-6952
F-3 5
Cylinder Gp - Lift (left Hand) (242/257/259) 329-4955
Cylinder Gp - Lift (Left Hand (252) 297-8699
Cylinder Gp - Lift (Right Hand) (216/226/247) 293-5705
Cylinder Gp - Lift (Right Hand) (236) 295-6951
F-3 6
Cylinder Gp - Lift (Right Hand) (242/257/259) 329-4955
Cylinder Gp - Lift (Right Hand) (252) 297-8699
Cylinder Gp - Tilt (Left Hand) (216/226/247) 293-5708
Cylinder Gp - Tilt (Left Hand) (236/252) 295-6954 F-2 7
Cylinder Gp - Tilt (Left Hand) (242/257/259) 329-4954
Cylinder Gp - Tilt (Right Hand) (216/226/247) 293-5707
Cylinder Gp - Tilt (Right Hand) (236/252) 295-6953 F-2 8
Cylinder Gp - Tilt (Right Hand) (242/257/259) 329-4953
Filter Gp - Oil 223-9974 C-3 9
Manifold As - Drain Manifold 308-0421 D-3 10
Motor Gp - Fan (Standard) 307-3036 C-2 11
Motor Gp - Single Speed (Left Hand) (216/226/242) 280-7854
Motor Gp - Single Speed (Left Hand) (236/252) 358-4982 C-7 12
Motor Gp - Single Speed (Left Hand) (247/257) 289-6355
Motor Gp - Single Speed (Right Hand) (216/226/242) 280-7854
Motor Gp - Single Speed (Right Hand) (236/252) 358-4982 B-4 13
Motor Gp - Single Speed (Right Hand) (247/257) 289-6355
Pump Gp - Implement and Charge (216/226/247) (Quiet) 269-9462
Pump Gp - Implement and Charge (216/226/247) (Standard) 236-5106
A-3 14
Pump Gp - Implement and Charge (236/242/252/257/259) (Quiet) 289-6358
Pump Gp - Implement and Charge (236/242/252/257/259) (Standard) 238-7642
Pump Gp - Single Speed (216) 398-7470
Pump Gp - Single Speed (226/247) 398-7472
A-4 15
Pump Gp - Single Speed (236/252) 307-3070
Pump Gp - Single Speed (242/257) 341-7642
Switch As - Pressure (Back Up Alarm) 192-0836 D-7 18
Tank Gp - Hydraulic 326-5781 B-2 19
Valve Gp - Ball (Manual Loader Lowering Valve) 112-1817 F-4 20
Valve Gp - Brake (Single Speed) (216/226/242/247/257) 248-1268
C-6 21
Valve Gp - Brake (Single Speed) (236/252) 233-7131
Valve Gp - Check 123-4750 B-6 22
Valve Gp - Control (216/226/247) 336-1317
Valve Gp - Control (236) 336-1319 E-3 23
Valve Gp - Control (242/252/257/259) 336-1320
Valve Gp - Implement Pilot Control (With Float Detent Magnet) 299-9119 F-6 24
Valve Gp - S-Turn Resolver Block (Drive Pilot) (216/226/236/242/252) 356-5008
Valve Gp - S-Turn Resolver Block (Drive Pilot) (247/257) 356-5009 F-8 25
Valve Gp - S-Turn Resolver Block (Drive Pilot) (259) 356-5010
COMPONENT LOCATION
Volume 2 of 2 - HYDRAULIC OPTIONS
Part Schematic Machine
Description
Number Location Location
Accumulator 149-0686 B-5 30
Coupling Gp (226/242/257/259) 345-5165 D-5 31
Cylinder Gp - Hydraulic Coupler (Left Hand) 192-2640 B-8 32
Cylinder Gp - Hydraulic Coupler (Right Hand) 192-2640 B-7 33
Cylinder Gp - Lift Left Hand (216/226/247) 293-5706
Cylinder Gp - Lift Left Hand (236) 295-6952
D-6 34
Cylinder Gp - Lift Left Hand (242/257/259) 329-4955
Cylinder Gp - Lift Left Hand (252) 297-8699
Cylinder Gp - Lift Right Hand (216/226/247) 293-5705
Cylinder Gp - Lift Right Hand (236) 295-6951
D-6 35
Cylinder Gp - Lift Right Hand (242/257/259) 329-4955
Cylinder Gp - Lift Right Hand (252) 297-8699
Cylinder Gp - Tilt Left Hand (216/226/247) 293-5708
Cylinder Gp - Tilt Left Hand (236/252) 295-6954 D-6 36
Cylinder Gp - Tilt Left Hand (242/257/259) 329-4954
Cylinder Gp - Tilt Right Hand (216/226/247) 293-5707
Cylinder Gp - Tilt Right Hand (236/252) 295-6953 D-6 37
Cylinder Gp - Tilt Right Hand (242/257/259) 329-4953
Motor Gp - A/C Compressor (226/247) 307-6115 A-7 38
Motor Gp - Fan (Demand) 258-2577 A-8 39
Motor Gp - Two Speed (Left Hand) (236/252) 358-4984
F-8 40
Motor Gp - Two Speed (Left Hand) (242) 307-3071
Motor Gp - Two Speed (Right Hand) (236/252) 358-4986
F-6 41
Motor Gp - Two Speed (Right Hand) (242) 307-3073
Motor Gp - Two Speed Left Hand (257) 307-3052 C-4 42
Motor Gp - Two Speed Left Hand (259) 373-8470 F-4 43
Motor Gp - Two Speed Right Hand (259) 373-8470 F-2 44
Motor Gp - Two Speed Right Hand (257) 307-3052 C-2 45
Pump Gp - Implement, Charge And Boost (226) (Standard) 225-9238
Pump Gp - Implement, Charge And Boost (226) (Quiet) 269-9465 A-6 46
Pump Gp - Implement, Charge, And Boost (242/257/259) (Quiet) 358-5001
Pump Gp - Two Speed (236/252) 307-3070
E-6 47
Pump Gp - Two Speed (242) 341-7665
Pump Gp - Two Speed (257) 341-7642 B-4 48
Pump Gp - Two Speed (259) 307-3068 D-2 49
Tank Gp - Hydraulic 326-5781 B-6 52
Valve Gp - Boost Flow (226/242/257/259) 359-7233 A-6 53
Valve Gp - Brake (Two Speed) (236/242/252) 293-6591 F-7 54
Valve Gp - Brake (Two Speed) (257) 293-6591 C-3 55
Valve Gp - Brake (Two Speed) (259) 293-6591 F-3 56
Valve Gp - Check (226/242/257/259) 373-6965 A-5 57
Valve Gp - Control (216/226/247) 336-1317
Valve Gp - Control (236) 336-1319 C-7 58
Valve Gp - Control (242/252/257/259) 336-1320
Valve Gp - Diverter (Bucket Leveling) - Raise (216/226/247) 224-9418
Valve Gp - Diverter (Bucket Leveling) - Raise (236) 224-9408 C-8 59
Valve Gp - Diverter (Bucket Leveling) - Raise (242/252/257/259) 223-8418
Valve Gp - Hydraulic Coupler 233-7128 B-8 60
TAP LOCATION
Volume 1 of 2 - BASE MACHINES

Tap Schematic
Description
Number Location
AA Main Work tool System Pressure E-3
BB SOS C-2
CC Signal Pressure C-6
DD Main System Pressure (Pump 1 Forward) B-6
EE Charge Pressure B-6
FF Main System Pressure (Pump 2 Forward) B-5
GG Main System Pressure (Pump 2 Reverse) A-5
HH Main System Pressure (Pump 1 Reverse) A-6
TAP LOCATION
Volume 2 of 2 - HYDRAULIC OPTIONS

Tap Schematic
Description
Number Location
AA Maain WorkTool System Pressure C-7
BB SOS A-8
Main System Pressure (Pump 1 Forward) (236/242/252) E-7
DD Main System Pressure (Pump 1 Forward) (257) B-3
Main System Pressure (Pump 1 Forward) (259) E-3
Charge Pressure (236/242/252) E-7
EE Charge Pressure (257) B-3
Charge Pressure (259) E-3
Main System Pressure (Pump 2 Forward) (236/242/252) E-6
FF Main System Pressure (Pump 2 Forward) (257) B-3
Main System Pressure (Pump 2 Forward) (259) E-3
Main System Pressure (Pump 2 Reverse) (236/242/252) D-6
GG Main System Pressure (Pump 2 Reverse) (257) A-3
Main System Pressure (Pump 2 Reverse) (259) D-3
Main System Pressure (Pump 1 Reverse) (236/242/252) D-7
HH Main System Pressure (Pump 1 Reverse) (257) A-3
Main System Pressure (Pump 1 Reverse) (259) D-3
SPECIFICATIONS AND RELATED MANUALS
Volume 1 of 2 - BASE MACHINES

Description Media Number

Parts Manual

Machine System
Specifications UENR0249
Testing and Adjusting UENR0250
Electrical System
Schematic: (Electrical System) UENR0254
SPECIFICATIONS AND RELATED MANUALS
Volume 2 of 2 - HYDRAULIC OPTIONS

Description Media Number

Parts Manual

Machine System
Specifications UENR0249
Testing and Adjusting UENR0250
Electrical System
Schematic: (Electrical System) UENR0254
 8 7 6 5 4 3 2 1

(25) VALVE GP
S-TURN RESOLVER BLOCK (8) CYLINDER GP
(5) CYLINDER GP TILT (RIGHT HAND)
(DRIVE PILOT) (24) VALVE GP LIFT CYLINDERS
LIFT (LEFT HAND) TILT CYLINDERS 293-5707 (216/226/247)
356-5008 (216/226/236/242/252) IMPLEMENT PILOT CONTROL 293-5706 (216/226/247) 295-6953 (236/252)
F 356-5009 (247/257)
F
(WITH FLOAT DETENT MAGNET) 329-4953 (242/257/259)
295-6952 (236)
356-5010 (259) DRIVE PILOT VALVE 299-9119
IMPLEMENT PILOT VALVE 329-4955 (242/257/259)
297-8699 (252)
NEUTRAL NEUTRAL NEUTRAL NEUTRAL AUXILIARY TOOLS
REVERSE FORWARD LEFT RIGHT DUMP RACK LOWER RAISE (4) COUPLING
(6) CYLINDER GP
(7) CYLINDER GP MALE
LIFT (RIGHT HAND)
TILT (LEFT HAND) 193-8334
(20) VALVE GP 293-5705 (216/226/247) (3) COUPLING
BALL 293-5708 (216/226/247)
295-6951 (236) FEMALE
(MANUAL LOADER LOWERING VALVE)
295-6954 (236/252) 193-8335
112-1817 329-4955 (242/257/259)
329-4954 (242/257/259)
297-8699 (252)

1A 1B 2A 2B 3A 3B
(23) VALVE GP
1 3 2 4 CONTROL
E E
336-1317 (216/226/247)
336-1319 (236)
4 P T 2 3 1 336-1320 (242/252/257/259)

AA

F E
C D

G
F C D E P T (1) ACCUMULATOR
149-0686
D D

(18) SWITCH AS
(2) COOLER AS
PRESSURE ML MR CI (10) MANIFOLD AS
(9) FILTER GP RADIATOR
(BACK UP ALARM) DRAIN MANIFOLD OIL 361-4662 (216)
192-0836 (11) MOTOR GP
HP 308-0421 223-9974
FAN (STANDARD) 361-4663 (226/247)
307-3036 361-4665 (236/242/252/257/259)

DRAIN

RJ DL T CO

(21) VALVE GP
(12) MOTOR GP BRAKE
C SINGLE SPEED (SINGLE SPEED) C
(LEFT HAND) 248-1268 (216/226/242/247/257)
BB
280-7854 (216/226/242) 233-7131 (236/252)
SOS/
358-4982 (236/252) DIAGNOSTIC PORT
289-6355 (247/257)
CC Z L A B (13) MOTOR GP
B A L Z C
SINGLE SPEED
(RIGHT HAND)
RIGHT 280-7854 (216/226/242)
MOTOR 358-4982 (236/252)
LEFT T P
MOTOR 289-6355 (247/257)

DD EE FF BAFFLE
(22) VALVE GP
B CHECK B
R T1 123-4750 MG A MB B Y G1 G B MB A R
(19) TANK GP
SPEED HYDRAULIC
SENSING 326-5781
FWD
FWD
HYDRAULIC CIRCUIT COLOR DESCRIPTIONS LINE PATTERNS
PILOT CONTROL CIRCUIT Pressure Line
MAIN PUMP OUTPUT
TILT CYLINDER CONTROL CIRCUIT Pilot / Load Sensing Pressure
SUPPLY LINE

M BRAKE CONTROL CIRCUIT

LEFT HYDROSTATIC PUMP CIRCUIT
Drain / Return Lines

Component Group
(15) PUMP GP AUXILARY TOOLS CONTROL CIRCUIT
DRAIN / RETURN LINE
SINGLE SPEED CHARGE SUPPLY PUMP CIRCUIT
Air Line
398-7470 (216) RIGHT HYDROSTATIC PUMP CIRCUIT
LIFT CYLINDER CONTROL CIRCUIT CALLOUTS
398-7472 (226/247)
307-3070 (236/252)
YY Taps (Pressure, Sampling, Sensor - by letter)
(14) PUMP GP
341-7642 (242/257) DL DL D Connectors (By letter)
LR LF RF RR IMPLEMENT AND CHARGE Do not operate or work on this product unless you have
read and understood the instruction and warnings in the
A relevant Operation and Maintenance Manuals and Callout Number Component A
269-9462 (216/226/247) (QUIET) relevant service literature. Failure to follow the instruc- (Machine Location from (52) VALVE GP - CONTROL Name
tions or heed the warnings could result in injury or Component LocationsTable)
X3 X4 MA MA X4 X3 death. Proper care is your responsibility. 138-1234 Part Number
236-5106 (216/226/247) (STANDARD)
HH
GG
289-6358 (236/242/252/257/259) (QUIET) THIS SCHEMATIC IS FOR THE 216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, AND 259B3
238-7642 (236/242/252/257/259) (STANDARD) SKID STEER LOADER, MULTI-TERRAIN LOADER, AND COMPACT TRACK LOADER HYDRAULIC SYSTEM
VOLUME 1 of 2: BASE MACHINES
MEDIA NUMBER: UENR3952-02
SCHEMATIC PART NUMBER: 326-5540, CHANGE: 04, VERSION: -
Components are shown installed on a fully operable machine with the key and engine off, transmission shifter in neutral and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1

C1

C1
P (54) VALVE GP
C2
BRAKE (41) MOTOR GP C2
(TWO SPEED) TO DRAIN TWO SPEED P
(40) MOTOR GP TO DRAIN MANIFOLD
F MANIFOLD 293-6591 (236/242/252) (RIGHT HAND) (56) VALVE GP (44) MOTOR GP F
TWO SPEED (43) MOTOR GP
358-4986 (236/252) BRAKE TWO SPEED
(LEFT HAND) T
TWO SPEED
307-3073 (242) (TWO SPEED) (RIGHT HAND)
358-4984 (236/252) (LEFT HAND)
293-6591 (259) 373-8470 (259)
307-3071 (242) 373-8470 (259)
A L Z L X B A
B X Z TO DRAIN T
RIGHT
MOTOR LEFT MANIFOLD RIGHT
LEFT MOTOR
Pp MOTOR
MOTOR Pp

P2 P1
FINAL FINAL
DRIVE DRIVE
P2
TO DRIVE FROM CHARGE P1
DD PILOT FILTER
TO DRAIN FF
MANIFOLD TO IMPLEMENT VALVE EE
R T1 MG A MB B Y G1 G B MB A R Dr Dr

SPEED
SENSING TO DRAIN TO DRAIN
FROM MANIFOLD
E FWD FWD MANIFOLD
TO DRIVE CHARGE
E
DD PILOT FILTER FF
Ss Ps Ps Ss
TO DRAIN EE
MANIFOLD TO IMPLEMENT VALVE
M R T1 MG A MB B Y G1 G B MB A R

(47) PUMP GP SPEED

TWO SPEED SENSING

307-3070 (236/252) FWD FWD

(49) PUMP GP
LR LF RF RR 341-7665 (242)
TWO SPEED
X3
307-3068 (259)
X4 MA MA X4 X3
HH GG

FROM DRIVE JOYSTICK FROM DRIVE JOYSTICK M

TWO SPEED (MODELS 236/242/252 )

(34) CYLINDER GP RF RR
(37) CYLINDER GP LR LF
BUCKET LEVELING LIFT (LEFT HAND)
D TILT (RIGHT HAND) D
DIVERTER VALVE 293-5706 (216/226/247) LIFT CYLINDERS
ALL MODELS TILT CYLINDERS 293-5707 (216/226/247) FROM HYSTAT PUMP X3 X4 MA MA X4 X3
295-6952 (236) HH GG
295-6953 (236/252)
A 329-4953 (242/257/259)
329-4955 (242/257/259)
FROM DRIVE JOYSTICK FROM DRIVE JOYSTICK
297-8699 (252)
AUXILIARY TOOLS
B (35) CYLINDER GP TWO SPEED (MODEL 259)
LIFT (RIGHT HAND)
293-5705 (216/226/247) (36) CYLINDER GP
TILT (LEFT HAND) (31) COUPLING GP
295-6951 (236) 345-5165
293-5708 (216/226/247)
329-4955 (242/257/259) (226/242/257/259)
295-6954 (236/252)
297-8699 (252) 329-4954 (242/257/259)
C1
TO IMPLEMENT JOYSTICK

C2
P
C D FROM IMPLEMENT JOYSTICK (55) VALVE GP
1A 1B 2A 2B 3A 3B BRAKE (45) MOTOR GP
(42) MOTOR GP
(59) VALVE GP (TWO SPEED) TWO SPEED (RIGHT HAND)
TWO SPEED (LEFT HAND)
DIVERTER 293-6591 (257) 307-3052 (257)
307-3052 (257)
C (BUCKET LEVELING) RAISE (58) VALVE GP T C
LEFT TO DRAIN
224-9418 (216/226/247) CONTROL MOTOR MANIFOLD RIGHT
Pp Pp MOTOR
224-9408 (236) 336-1317 (216/226/247)
223-8418 (242/252/257/259) 336-1319 (236)
336-1320 (242/252/257/259)
P1 P1
FINAL FINAL
AA DRIVE DRIVE
(33) CYLINDER GP
(32) CYLINDER GP P2 P2
HYDRAULIC COUPLER
HYDRAULIC COUPLER HYDRAULIC
COUPLER (RIGHT HAND)
(LEFT HAND) ALL MODELS 192-2640
192-2640
FROM
TO DRAIN TO DRIVE CHARGE
MANIFOLD PILOT FILTER
Dr Ps DD FF Ps Dr
(30) ACCUMULATOR TO IMPLEMENT VALVE
EE
149-0686 TO DRAIN
R T1 MG A MB B Y G1 G B MB A R MANIFOLD
FROM IMPLEMENT JOYSTICK

SPEED
C2 C1 SENSING HYDRAULIC CIRCUIT COLOR DESCRIPTIONS
FWD FWD
B MAIN PUMP OUTPUT
TILT CYLINDER CONTROL CIRCUIT
B
S1
(52) TANK GP SUPPLY LINE
S2
TO DRAIN
MANIFOLD
HYDRAULIC BRAKE CONTROL CIRCUIT
P T LEFT HYDROSTATIC PUMP CIRCUIT
326-5781 AUXILARY TOOLS AND HIGH FLOW CONTROL CIRCUIT

(60) VALVE GP M DRAIN / RETURN LINE

CHARGE SUPPLY PUMP CIRCUIT
QUICK COUPLER CIRCUIT
HYDRAULIC COUPLER BAFFLE RIGHT HYDROSTATIC PUMP CIRCUIT
LIFT CYLINDER CONTROL CIRCUIT
233-7128
AC (48) PUMP GP
COMPRESSOR TWO SPEED
TO DRAIN FROM DRAIN MANIFOLD
MOTOR MANIFOLD
LR LF RF RR LINE PATTERNS
341-7642 (257)
DEMAND Pressure Line
X3 X4 MA MA X4 X3
FAN HH Pilot / Load Sensing Pressure
TO DRAIN
MANIFOLD
Drain / Return Lines
T FROM DRIVE JOYSTICK GG
FROM DRIVE JOYSTICK
Component Group
To Cooler
(39) MOTOR GP Air Line
FAN (DEMAND)
P
TWO SPEED (MODEL 257) CALLOUTS
258-2577
YY Taps (Pressure, Sampling, Sensor - by letter)
To Filter Do not operate or work on this product unless you have DL DL D Connectors (By letter)
AUX read and understood the instruction and warnings in the
A BB relevant Operation and Maintenance Manuals and Callout Number Component
A
(53) VALVE GP relevant service literature. Failure to follow the instruc- (Machine Location from (52) VALVE GP - CONTROL Name
tions or heed the warnings could result in injury or Component LocationsTable)
138-1234
SOS/ DIAGNOSTIC BOOST FLOW death. Proper care is your responsibility.
Part Number

PORT (38) MOTOR GP

359-7233 (226/242/257/259)
A/C COMPRESSOR (46) PUMP GP THIS SCHEMATIC IS FOR THE 216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, AND 259B3
(57) VALVE GP
307-6115 (226/247) IMPLEMENT, CHARGE AND BOOST CHECK SKID STEER LOADER, MULTI-TERRAIN LOADER, AND COMPACT TRACK LOADER HYDRAULIC SYSTEM
225-9238 (226) (STANDARD) 373-6965 (226/242/257/259) VOLUME 2 of 2: HYDRAULIC OPTIONS
269-9465 (226) (QUIET) MEDIA NUMBER: UENR3952-02
358-5001 (242/257/259) (QUIET) SCHEMATIC PART NUMBER: 326-5540, CHANGE: 04, VERSION: -
AUXILIARY HIGH FLOW (226,242,257,259) Components are shown installed on a fully operable machine with the key and engine off, transmission shifter in neutral and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

8 7 6 5 4 3 2 1
MACHINE - FRONT VIEW
VIEW ALL CALLOUTS

19

6
5

15

18
24
25

13
14

12
4

8 3

7
MACHINE - REAR VIEW
VIEW ALL CALLOUTS

BB 11

9
MAIN HYDRAULICS - RIGHT SIDE VIEW
VIEW ALL CALLOUTS

CC 21

HH GG

VIEW OF AREA “B”

(ROTATED FOR CLARITY)

A
AA

FF

DD
B
EE 1 10 22 23 20

VIEW OF AREA “A”

(ROTATED FOR CLARITY)
MACHINE - FRONT VIEW
VIEW ALL CALLOUTS

35

47

52
48

34
49

31
44
46
45
40
41
42
37
43

36

33 32
MACHINE - REAR VIEW
VIEW ALL CALLOUTS

BB 39

60
MAIN HYDRAULICS - RIGHT SIDE VIEW
VIEW ALL CALLOUTS

59 56 54 55

HH GG

A VIEW OF AREA “B”

(ROTATED FOR CLARITY)

AA

FF

DD
EE 38 30 58 53 57
B
NOT NOT
SHOWN SHOWN

VIEW OF AREA “A”

(ROTATED FOR CLARITY)