P.O.

Box 86236, Baton Rouge, LA 70879, USA

Phone: +1 225 612-4643 FAX: +1 225 612-6994
Email : [email protected]
Website: http://www.ictuniversity.org

Lecture 4 Revision Questions

Course: Computer networking and security
Lecturer: Schmidt Tani

Section A Lab – Converting IPv4 Addresses to Binary

Objectives
Part 1: Convert IPv4 Addresses from Dotted Decimal to Binary
Part 2: Use Bitwise ANDing Operation to Determine Network Addresses
Part 3: Apply Network Address Calculations

Background / Scenario
Every IPv4 address is comprised of two parts: a network portion and a host portion. The network portion of an
address is the same for all devices that reside in the same network. The host portion identifies a specific host
within a given network. The subnet mask is used to determine the network portion of an IP address. Devices
on the same network can communicate directly; devices on different networks require an intermediary Layer 3
device, such as a router, to communicate.
To understand the operation of devices on a network, we need to look at addresses the way devices do—in
binary notation. To do this, we must convert the dotted decimal form of an IP address and its subnet mask to
binary notation. After this has been done, we can use the bitwise ANDing operation to determine the network
address.
This lab provides instructions on how to determine the network and host portion of IP addresses by converting
addresses and subnet masks from dotted decimal to binary, and then using the bitwise ANDing operation.
You will then apply this information to identify addresses in the network.

Part 1: Convert IPv4 Addresses from Dotted Decimal to Binary

In Part 1, you will convert decimal numbers to their binary equivalent. After you have mastered this activity,
you will convert IPv4 addresses and subnet masks from dotted decimal to their binary form.

Step 1: Convert decimal numbers to their binary equivalent.

Fill in the following table by converting the decimal number to an 8-bit binary number. The first number has
been completed for your reference. Recall that the eight binary bit values in an octet are based on the powers
of 2, and from left to right are 128, 64, 32, 16, 8, 4, 2, and 1.

De ccimal Binary

192 11000000
168
10

Page 1 of 4
Lab – Converting IPv4 Addresses to Binary

Step 2: Convert the IPv4 addresses to their binary equivalent.

An IPv4 address can be converted using the same technique you used above. Fill in the table below with the
binary equivalent of the addresses provided. To make your answers easier to read, separate the binary octets
with a period.

Decimal Binary

192.168.10.10 11000000.10101000.00001010.00001010
209.165.200.229
172.16.18.183
10.86.252.17

Part 2: Use Bitwise ANDing Operation to Determine Network Addresses

In Part 2, you will use the bitwise ANDing operation to calculate the network address for the provided host
addresses. You will first need to convert an IPv4 decimal address and subnet mask to their binary equivalent.
Once you have the binary form of the network address, convert it to its decimal form.
Note: The ANDing process compares the binary value in each bit position of the 32-bit host IP with the
corresponding position in the 32-bit subnet mask. If there two 0s or a 0 and a 1, the ANDing result is 0. If
there are two 1s, the result is a 1, as shown in the example here.

Step 1: Determine the number of bits to use to calculate the network address.

Description Decimal Binary

IP Address 192.168.10.131 11000000.10101000.00001010.10000011

Subnet Mask 255.255.255.192 11111111.11111111.11111111.11000000
Network Address 192.168.10.128 11000000.10101000.00001010.10000000

How do you determine what bits to use to calculate the network address?

In the example above, how many bits are used to calculate the network address?

Page 2 of 4
Lab – Converting IPv4 Addresses to Binary

Step 2: Use the ANDing operation to determine the network address.

a. Enter the missing information into the table below:

Description Decimal Binary

IP Address 172.16.145.29
Subnet Mask 255.255.0.0
Network Address

b. Enter the missing information into the table below:

Description Decimal Binary

IP Address 192.168.10.10
Subnet Mask 255.255.255.0
Network Address

c. Enter the missing information into the table below:

Description Decimal Binary

IP Address 192.168.68.210
Subnet Mask 255.255.255.128
Network Address

d. Enter the missing information into the table below:

Description Decimal Binary

IP Address 172.16.188.15
Subnet Mask 255.255.240.0
Network Address

e. Enter the missing information into the table below:

Description Decimal Binary

IP Address 10.172.2.8
Subnet Mask 255.224.0.0
Network Address

Page 3 of 4
Lab – Converting IPv4 Addresses to Binary

Part 3: Apply Network Address Calculations

In Part 3, you must calculate the network address for the given IP addresses and subnet masks. After you
have the network address, you should be able to determine the responses needed to complete the lab.

Step 1: Determine whether IP addresses are on same network.

a. You are configuring two PCs for your network. PC-A is given an IP address of 192.168.1.18, and PC-B is
given an IP address of 192.168.1.33. Both PCs receive a subnet mask of 255.255.255.240.
What is the network address for PC-A?
What is the network address for PC-B?
Will these PCs be able to communicate directly with each other?
What is the highest address that can be given to PC-B that allows it to be on the same network as PC-A?

Step 2: Identify the default gateway address.

a. Your company has a policy to use the first IP address in a network as the default gateway address. A
host on the local-area network (LAN) has an IP address of 172.16.140.24 and a subnet mask of
255.255.192.0.
What is the network address for this network?

What is the default gateway address for this host?

Reflection
Why is the subnet mask important in determining the network address?

Page 4 of 4
Lab– Identifying IPv4 Addresses
Objectives
Part 1: Identify IPv4 Addresses
Identify the network and host portion of an IP address.
Identify the range of host addresses given a network/prefix mask pair.
Part 2: Classify IPv4 Addresses
Identify the type of address (network, host, multicast, or broadcast).
Identify whether an address is public or private.
Determine if an address assignment is a valid host address.

Background / Scenario
Addressing is an important function of network layer protocols because it enables data communication
between hosts on the same network, or on different networks. In this lab, you will examine the structure of
Internet Protocol version 4 (IPv4) addresses. You will identify the various types of IPv4 addresses and the
components that help comprise the address, such as network portion, host portion, and subnet mask. Types
of addresses covered nclude public, private, unicast, and multicast.

Required Resources
Device with Internet access
Optional: IPv4 address calculator

Part 1: Identify IPv4 Addresses

In Part 1, you will be given several examples of IPv4 addresses and will complete tables with appropriate
information.

Step 1: Analyze the table shown below and identify the network portion and host portion of the
given IPv4 addresses.
The first two rows show examples of how the table should be completed.
Key for table:
N = all 8 bits for an octet are in the network portion of the address
n = a bit in the network portion of the address
H = all 8 bits for an octet are in the host portion of the address
h = a bit in the host portion of the address

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Publiic. Page 1 of 4
Lab– Identifying IPv4 Addresses

Network/Host
N,n = Network
IP Address/Prefix H,h = Host Subnet Mask Network Address

192.168.10.10/24 N.N.N.H 255.255.255.0 192.168.10.0

10.101.99.17/23 N.N.nnnnnnnh.H 255.255.254.0 10.101.98.0
209.165.200.227/27
172.31.45.252/24
10.1.8.200/26
172.16.117.77/20
Step 2: Analyze the table below and list the range of host and broadcast addresses given a
network/prefix mask pair.
The first row shows an example of how the table should be completed.

Last Host Broadcast

IP Address/Prefix First Host Address Address Address

192.168.10.10/24 192.168.10.1 192.168.10.254 192.168.10.255

10.101.99.17/23
209.165.200.227/27
172.31.45.252/24
10.1.8.200/26

Part 2: Classify IPv4 Addresses

In Part 2, you will identify and classify several examples of IPv4 addresses.

Step 1: Analyze the table shown below and identify the type of address (network, host,
multicast, or broadcast address).
The first row shows an example of how the table should be completed.

Page 2 of 4
 Lab– Identifying IPv4 Addresses

IP Address Subnet Mask Address Type

10.1.1.1 255.255.255.252 host

192.168.33.63 255.255.255.192
239.192.1.100 255.252.0.0
172.25.12.52 255.255.255.0
10.255.0.0 255.0.0.0

Step 2: Analyze the table shown below and identify the address as public or private.

IP Address/Prefix Public or Private

209.165.201.30/27
192.168.255.253/24
10.100.11.103/16
172.30.1.100/28
192.31.7.11/24

Step 3: Analyze the table shown below and identify whether the address/prefix pair is a valid
host address.

IP Address/Prefix Valid Host Address? Reason

127.1.0.10/24
172.16.255.0/16
241.19.10.100/24
192.168.0.254/24
192.31.7.255/24

Reflection
Why should we continue to study and learn about IPv4 addressing if the available IPv4 address space is
depleted?

Page 3 of 4
Lab– Identifying IPv4 Addresses

Page 4 of 4