Anritsu M5 Metal Detector Brochure
Anritsu M5 Metal Detector Brochure
Anritsu M5 Metal Detector Brochure
June 2016
M5 Series
Metal Detector
Simplified Operation
Easily navigated one-touch operation for frequently used functions.
Built-in support features improve productivity and accuracy.
Built-in troubleshooting screens determine the Accurate illustrated Help messages minimize
cause of false rejects and provide suggestions to production line downtime by reducing the need
ensure repeatable, stable system performance. for outside service support.
2
Anritsu Proprietary Next Generation,
High Sensitivity Technology
Operator Frien
Friendly Tutorials for Product Registration and Smart Guide
Product Registration Navigation Simplified, illustrated parameter setting procedures with step-by-step instructions
3
M5 Series Metal Detector
Entry Model
Maximum pass width: 300 mm
KDB3005AHF Model H1 H2
Pass height: 50 mm KDB3005AHW KDB3005AHF / AHW 50 925
KDB3008AHF / AHW
KDB3008AHF KDB3008AHF / AHW 80 925
KDB3012AHF / AHW 120 965
KDB3008AHW
KDB3015AHF / AHW 150 995
KDB3012AHF
Pass height: 80 mm KDB3012AHW
KDB3018AHF / AHW 180 1025
KDB3012AHF / AHW
KDB3015AHF
KDB3015AHW
KDB3018AHF
Pass height: 120 mm KDB3018AHW
Belt width
KDB3018AHF / AHW
230
390
Detector head
780
390
Pass height: 180 mm
Photocell
Maximum pass width
Effective detection width
Indicator 800
290 300
Pass height
Roller
Ф33 Flow direction
H1
H2 +100
-50
Line heights
700 to 850
Conveyor
■ Specifications
Non-Waterproof KDB3005AHF KDB3008AHF KDB3012AHF KDB3015AHF KDB3018AHF
Model
Waterproof KDB3005AHW KDB3008AHW KDB3012AHW KDB3015AHW KDB3018AHW
Pass height 50 mm 80 mm 120 mm 150 mm 180 mm
Maximum pass width 300 mm
Belt width 230 mm
Display 7-inch color TFT LCD
Operation method Touch panel (Start, Stop, and Home are direct push buttons)
Preset memory Maximum 200
Product packaging Both general and aluminum-evaporated-packaging products
Detection method Simultaneous 2-frequency magnetization detection method
Belt speed 1 25 m/min (50 Hz), 30 m/min (60 Hz)
Maximum product weight 2 15 O
Metal detection Rejection signal output and beep, or belt stop and beep
100 Vac, single phase 50/60 Hz ; 110/115/120 Vac, single phase 60 Hz ; 200 Vac, single phase 50/60 Hz ;
Power supply 3, 4
220/230 Vac, single phase 50/60 Hz ; or 240 Vac, single phase 50 Hz
Power consumption 160 VA, rush current 50 A (typ.) (20 ms or less)
Mass 77 O 76 O 79 O 81 O 82 O
Environmental conditions 0 to 40°C, relative humidity 30 to 85%, non-condensing
Protection class AHF type: IP30 compliance / AHW type: IP66 compliance
Indicator and detector head: stainless steel (SUS304)
Exterior
Conveyor frame and stand AHF type: metal (coating) / AHW type: stainless steel (SUS304)
Data output USB port as an option (USB2.0), Ethernet interface as an option (10BASE-T, 100BASE-TX)
1:Belt speeds other than those listed above are available as options. Contact our sales representatives for details.
2:Sum total of product weight on the conveyor. Feed capacity may vary according to the belt speed.
3:Specify one of these power supplies for use when ordering.
4:Please use the rated voltage for the power supply voltage.
A rise of a temperature in the motor may occur when the variation width of the power supply voltage is large.
Conveyor torque may deteriorate when the power supply voltage is low.
Note: The shape (length, width, and height) of products to be inspected varies with the rejector type.
Note: The noise level of the metal detectors does not exceed 70 dB (A).
4
M5 Series Metal Detector
Entry Model
Maximum pass width: 450 mm
KDB4505AHF Model H1 H2
Pass height: 50 mm KDB4505AHW KDB4505AHF / AHW 50 925
KDB4510AHF / AHW
KDB4510AHF KDB4510AHF / AHW 100 945
KDB4513AHF / AHW 130 975
KDB4510AHW
KDB4515AHF / AHW 150 995
KDB4513AHF
Pass height: 100 mm KDB4513AHW
KDB4518AHF / AHW 180 1025
KDB4513AHF / AHW
KDB4515AHF
KDB4515AHW
KDB4518AHF
Pass height: 130 mm KDB4518AHW
Belt width
380
Pass height: 150 mm
471
KDB4518AHF / AHW
937
Detector head
466
Pass height: 180 mm
Photocell
Maximum pass width
Effective detection width
Indicator 800
290 450
Pass height
Roller
Ф33 Flow direction
H1
H2 +100
-50
Line heights
700 to 850
Conveyor
■ Specifications
Non-Waterproof KDB4505AHF KDB4510AHF KDB4513AHF KDB4515AHF KDB4518AHF
Model
Waterproof KDB4505AHW KDB4510AHW KDB4513AHW KDB4515AHW KDB4518AHW
Pass height 50 mm 100 mm 130 mm 150 mm 180 mm
Maximum pass width 450 mm
Belt width 380 mm
Display 7-inch color TFT LCD
Operation method Touch panel (Start, Stop, and Home are direct push buttons)
Preset memory Maximum 200
Product packaging Both general and aluminum-evaporated-packaging products
Detection method Simultaneous 2-frequency magnetization detection method
Belt speed 1 25 m/min (50 Hz), 30 m/min (60 Hz)
Maximum product weight 2 15 O
Metal detection Rejection signal output and beep, or belt stop and beep
100 Vac, single phase 50/60 Hz ; 110/115/120 Vac, single phase 60 Hz ; 200 Vac, single phase 50/60 Hz ;
Power supply 3, 4
220/230 Vac, single phase 50/60 Hz ; or 240 Vac, single phase 50 Hz
Power consumption 160 VA, rush current 50 A (typ.) (20 ms or less)
Mass 85 O 86 O 87 O 89 O 90 O
Environmental conditions 0 to 40°C, relative humidity 30 to 85%, non-condensing
Protection class AHF type: IP30 compliance / AHW type: IP66 compliance
Indicator and detector head: stainless steel (SUS304)
Exterior
Conveyor frame and stand AHF type: metal (coating) / AHW type: stainless steel (SUS304)
Data output USB port as an option (USB2.0), Ethernet interface as an option (10BASE-T, 100BASE-TX)
1:Belt speeds other than those listed above are available as options. Contact our sales representatives for details.
2:Sum total of product weight on the conveyor. Feed capacity may vary according to the belt speed.
3:Specify one of these power supplies for use when ordering.
4:Please use the rated voltage for the power supply voltage.
A rise of a temperature in the motor may occur when the variation width of the power supply voltage is large.
Conveyor torque may deteriorate when the power supply voltage is low.
Note: The shape (length, width, and height) of products to be inspected varies with the rejector type.
Note: The noise level of the metal detectors does not exceed 70 dB (A).
5
M5 Series Metal Detector
KDB3005AHFT Model W1 W2 W3 W4
Maximum pass width: 70 mm KDB3005AHWT KDB3005AHFT / AHWT 70 50 336 586
KDB3008AHFT / AHWT
KDB3008AHFT KDB3008AHFT / AHWT 100 80 351 601
KDB3012AHFT / AHWT 140 120 371 621
KDB3008AHWT
KDB3015AHFT / AHWT 170 150 386 636
KDB3012AHFT
Maximum pass width: 100 mm KDB3012AHWT
KDB3018AHFT / AHWT 200 180 401 651
KDB3012AHFT / AHWT
KDB3015AHFT
KDB3015AHWT
KDB3018AHFT
Maximum pass width: 140 mm KDB3018AHWT
KDB3015AHFT / AHWT
Belt width
250
W2
Maximum pass width: 170 mm
W4
Photocell
KDB3018AHFT / AHWT
W3
Detector head
800 W1
Maximum pass width: 200 mm Maximum pass width
200 Effective detection width
290
Indicator
Pass height
Flow
280
Roller direction
1230 to 1380
Ф33
Line heights
Conveyor
700 to 850
■ Specifications
Non-Waterproof KDB3005AHFT KDB3008AHFT KDB3012AHFT KDB3015AHFT KDB3018AHFT
Model
Waterproof KDB3005AHWT KDB3008AHWT KDB3012AHWT KDB3015AHWT KDB3018AHWT
Pass height 280 mm
Maximum pass width 70 mm 100 mm 140 mm 170 mm 200 mm
Belt width 50 mm 80 mm 120 mm 150 mm 180 mm
Display 7-inch color TFT LCD
Operation method Touch panel (Start, Stop, and Home are direct push buttons)
Preset memory Maximum 200
Product packaging Both general and aluminum-evaporated-packaging products
Detection method Simultaneous 2-frequency magnetization detection method
Belt speed 1 25 m/min (50 Hz), 30 m/min (60 Hz)
Maximum product weight 2 15 O
Metal detection Rejection signal output and beep, or belt stop and beep
100 Vac, single phase 50/60 Hz ; 110/115/120 Vac, single phase 60 Hz ; 200 Vac, single phase 50/60 Hz ;
Power supply 3, 4
220/230 Vac, single phase 50/60 Hz ; or 240 Vac, single phase 50 Hz
Power consumption 160 VA, rush current 50 A (typ.) (20 ms or less)
Mass 84 O 83 O 86 O 88 O 89 O
Environmental conditions 0 to 40°C, relative humidity 30 to 85%, non-condensing
Protection class AHFT type: IP30 compliance / AHWT type: IP66 compliance
Indicator and detector head: stainless steel (SUS304)
Exterior
Conveyor frame and stand AHFT type: metal (coating) / AHWT type: stainless steel (SUS304)
Data output USB port as an option (USB2.0), Ethernet interface as an option (10BASE-T, 100BASE-TX)
1:Belt speeds other than those listed above are available as options. Contact our sales representatives for details.
2:Sum total of product weight on the conveyor. Feed capacity may vary according to the belt speed.
3:Specify one of these power supplies for use when ordering.
4:Please use the rated voltage for the power supply voltage.
A rise of a temperature in the motor may occur when the variation width of the power supply voltage is large.
Conveyor torque may deteriorate when the power supply voltage is low.
Note: The shape (length, width, and height) of products to be inspected varies with the rejector type.
Note: The noise level of the metal detectors does not exceed 70 dB (A).
6
M5 Series Metal Detector
KDB4510AHFT Model W1 W2 W3 W4
Maximum pass width: 120 mm KDB4510AHWT KDB4510AHFT / AHWT 120 100 361 611
KDB4513AHFT / AHWT
KDB4513AHFT KDB4513AHFT / AHWT 150 130 376 626
KDB4515AHFT / AHWT 170 150 386 636
KDB4513AHWT
KDB4518AHFT / AHWT 200 180 401 651
KDB4515AHFT
Maximum pass width: 150 mm KDB4515AHWT
KDB4515AHFT / AHWT
KDB4518AHFT
KDB4518AHWT
KDB4518AHFT / AHWT
Belt width
㻞㻡㻜
W2
W4
Photocell
Maximum pass width: 200 mm
W3
Detector head
800 W1
Maximum pass width
200 Effective detection width
290
Indicator
Pass height
430
Flow
1380 to 1530
Roller direction
Ф33
Line heights
700 to 850
Conveyor
■ Specifications
Non-Waterproof KDB4510AHFT KDB4513AHFT KDB4515AHFT KDB4518AHFT
Model
Waterproof KDB4510AHWT KDB4513AHWT KDB4515AHWT KDB4518AHWT
Pass height 430 mm
Maximum pass width 120 mm 150 mm 170 mm 200 mm
Belt width 100 mm 130 mm 150 mm 180 mm
Display 7-inch color TFT LCD
Operation method Touch panel (Start, Stop, and Home are direct push buttons)
Preset memory Maximum 200
Product packaging Both general and aluminum-evaporated-packaging products
Detection method Simultaneous 2-frequency magnetization detection method
Belt speed 1 25 m/min (50 Hz), 30 m/min (60 Hz)
Maximum product weight 2 15 O
Metal detection Rejection signal output and beep, or belt stop and beep
100 Vac, single phase 50/60 Hz ; 110/115/120 Vac, single phase 60 Hz ; 200 Vac, single phase 50/60 Hz ;
Power supply 3, 4
220/230 Vac, single phase 50/60 Hz ; or 240 Vac, single phase 50 Hz
Power consumption 160 VA, rush current 50 A (typ.) (20 ms or less)
Mass 94 O 95 O 97 O 98 O
Environmental conditions 0 to 40°C, relative humidity 30 to 85%, non-condensing
Protection class AHFT type: IP30 compliance / AHWT type: IP66 compliance
Indicator and detector head: stainless steel (SUS304)
Exterior
Conveyor frame and stand AHFT type: metal (coating) / AHWT type: stainless steel (SUS304)
Data output USB port as an option (USB2.0), Ethernet interface as an option (10BASE-T, 100BASE-TX)
1:Belt speeds other than those listed above are available as options. Contact our sales representatives for details.
2:Sum total of product weight on the conveyor. Feed capacity may vary according to the belt speed.
3:Specify one of these power supplies for use when ordering.
4:Please use the rated voltage for the power supply voltage.
A rise of a temperature in the motor may occur when the variation width of the power supply voltage is large.
Conveyor torque may deteriorate when the power supply voltage is low.
Note: The shape (length, width, and height) of products to be inspected varies with the rejector type.
Note: The noise level of the metal detectors does not exceed 70 dB (A).
7
2014