945GC-230/945GC-330 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
 Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1
1.2 Package Checklist ............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors ..................................................................... 3
1.5 Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation .......................... 5
2.1 Installing Central Processing Unit (CPU)....................................... 5
2.2 FAN Headers...................................................................................... 5
2.3 Installing System Memory ................................................................ 6
2.4 Connectors and Slots ......................................................................... 7
Chapter 3: Headers & Jumpers Setup .................... 8
3.1 How to Setup Jumpers ...................................................................... 8
3.2 Detail Settings.................................................................................... 8
Chapter 4: Useful Help ........................................ 13
4.1 Driver Installation Note.................................................................. 13
4.2 AMI BIOS Beep Code....................................................................... 14
4.3 Extra Information............................................................................ 15
4.4 Troubleshooting............................................................................... 16
Appendix: SPEC In Other Languages ................... 18
German.................................................................................................................. 18
French .................................................................................................................... 20
Italian..................................................................................................................... 22
Spanish ................................................................................................................... 24
Portuguese ............................................................................................................ 26
Polish...................................................................................................................... 28
Russian ................................................................................................................... 30
Arabic..................................................................................................................... 32
Japanese ................................................................................................................ 34
 945GC-230/945GC-330
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„ Prepare a dry and stable working environment with
sufficient lighting.
„ Always disconnect the computer from power outlet
before operation.
„ Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
„ Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
„ Keep the computer from dangerous area, such as heat
source, humid air and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
Serial ATA Cable X 1
Serial ATA Power Cable X 1 (optional)
USB 2.0 Cable X1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1
Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

BGA 437
Supports Hyper-Threading
Intel CPU On-board
CPU Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Extended Memory 64 Technology
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
Chipset
Intel ICH7

Graphics Intel GMA 950 Max Shared Video Memory is 224MB

ITE 8718F Environment Control initiatives,

Provides the most commonly used legacy H/W Monitor

Super I/O
Super I/O functionality. Fan Speed Controller

Low Pin Count Interface ITE's "Smart Guardian" function

DIMM Slots x 1

Each DIMM supports 256/512MB & 1/2 GB

Main Singal Channel Mode DDR2 memory module
DDR2
Memory Registered DIMM and ECC DIMM is not supported
Max Memory Capacity 2GB

Supports DDR2 400 / 533

Ultra DMA 33 / 66 / 100 Bus Master Mode

IDE Integrated IDE Controller
supports PIO Mode 0~4,

Data transfer rates up to 3.0 Gb/s.

SATA Integrated Serial ATA Controller
SATA Version 2.0 specification compliant.

10 / 100 Mb/s auto negotiation

LAN Realtek RTL8102EL
Half / Full duplex capability

Sound 5.1 channels audio out

ALC662
Codec High-Definition Audio support

Slot PCI slot x1 Supports PCI expansion card

On Board IDE Connector x1 Each connector supports 2 IDE device

Connector SATA Connector x2 Each connector supports 1 SATA devices

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CD-in Connector x1 Supports CD audio-in function

System Fan header x2 System Fan Power supply

Clear CMOS header x1 Restore CMOS data to factory default

2
 945GC-230/945GC-330
SPEC

USB connector x2 Each connector supports 2 front panel USB ports

Power Connector (24pin) x1 Connects to Power supply

Serial port Connector x1 Connects to RS-232 Port

PS/2 Keyboard x1 Connects to PS/2 Keyboard

PS/2 Mouse x1 Connects to PS/2 Mouse

Serial Port x1 Provide RS-232 Serial connection

Back Panel Printer Port x1 Provide 1 connection for printer

I/O VGA port x1 Connects to monitor.

LAN port x1 Connects to RJ-45 ethernet cable

USB Port x4 Connects to USB devices

Audio Jack x3 Provide Audio-In/Out and microphone connection

Board Size 170 (W) x 170 (L) mm Mini ITX

Biostar reserves the right to add or remove support

OS Support Windows XP / Vista 32/ Vista 64
for any OS with or without notice.

1.4 REAR PANEL CONNECTORS

PS/2 Pr int er Por t LAN

Mouse Line In/
Sur round

Line Out

Mic I n 1/
Bass/ Cent er

PS/ 2 VGA COM Por t USBX2 USBX2

Keyboard

Since the audio chip supports High Definition Audio Specification, the function of each audio
jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio
port, please use the Line In (Blue) and Mic In (Pink) audio jack.

3
Motherboard Manual
1.5 MOTHERBOARD LAYOUT

JKBMS1
JATXPWR1

Intel JSFAN1
Atom
N230/
J VG 1

JSFAN2 N330
CPU1
Super
J PR NT1

I/O

JCOM2
COM 1
JCOM1

Intel

D IM M A1
945GC
JUSBV3

NB1
JUSB1 LAN

JCDIN1
JUSBV4

ID E1
JUSBLAN1
BIOS Intel
JAUDIOF1
JUSB3 ICH7 SATA1

BT1
JUSB2
JAUDIO1
JCMOS1
SATA2
Codec PCI1
JPANEL1

Note: ■ represents the 1st pin.

4
 945GC-230/945GC-330
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)
The motherboard includes an embedded Intel Atom N230 / N330
processor, and a heatsink has been installed to provide sufficient cooling.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JSFAN1/JSFAN2: System Fan Header
3 1

JSFAN1
Pin
JSFAN2 Assignment
1 Ground
1 3 2 +12V
3 FAN RPM rate
sense

Note:
JSFAN1/2 support 3-pin head connector. When connecting with wires onto connectors,
please note that the red wire is the positive and should be connected to pin#2, and the
black wire is Ground and should be connected to GND.

5
Motherboard Manual
2.3 INSTALLING SYSTEM MEMORY
A. DDR2 Module

D IM MA 1
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

6
 945GC-230/945GC-330
B. Memory Capacity
DIMM Socket
DDR2 Module Total Memory Size
Location

DIMMA1 256MB/512MB/1GB/2GB Max memory 2GB.

2.4 CONNECTORS AND SLOTS

IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality.
The IDE connector can connect a master and a slave drive, so you can connect
up to two hard disk drives.

40 39

2 1

PCI1: Peripheral Component Interconnect Slot

The motherboard is equipped with 1 standard PCI slot. PCI stands for Peripheral
Component Interconnect, and it is a bus standard for expansion cards. This PCI
slot is designated as 32 bits.

PCI1

7
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button, and speaker connections. It allows user to connect the PC case’s front
panel switch functions.
PWR_LED
S LP ON/O FF
+ + -
9 16
1 8
+ -
SPK RST
HLED

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control
Sleep button
2 N/A Speaker 10 Ground
3 N/A Connector 11 N/A N/A
4 Speaker 12 Power LED (+)
5 HDD LED (+) Hard drive 13 Power LED (+) Power LED
6 HDD LED (-) LED 14 Power LED (-)
7 Ground 15 Power button
Reset button Power-on button
8 Reset control 16 Ground

8
 945GC-230/945GC-330
JATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

1 12

13 24

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel

This motherboard provides 2 USB 2.0 headers, providing user to connect
additional USB cable on the PC front panel, and also can be connected with
internal USB devices, like USB card reader.

Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
JUSB3 7 Ground
2 10
8 Ground
9 Key
1 9 10 NC
JUSB2

9
Motherboard Manual

SATA1/SATA2: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 2 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

Pin Assignment
1 Ground
2 TX+

SATA1 SATA2 3 TX-

4 Ground
1 5 RX-

4 6 RX+
7 Ground
7

JAUDIOF1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. It will disable the output on back panel audio connectors.

Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
2 10
8 Key
9 Left line in
10 Jack Sense
1 9

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Pin Assignment
1 Left Channel
Input
2 Ground
3 Ground
4 Right Channel
4 1 Input

10
 945GC-230/945GC-330

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

1 3
Pin 1-2 Close:
Normal Operation (Default).

1 3

1 3 Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.

JCOM2: Serial port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment
1 2 1 Carrier detect
2 Received data
3 Transmitted data
9 10 4 Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator
10 NC

11
Motherboard Manual

JUSBV3/JUSBV4: Power Source Headers for USB Ports

Pin 1-2 Close:
JUSBV3: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBV4: +5V for USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV3: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby
voltage.
JUSBV4: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby voltage.

3 1

Pin 1-2 close

JUSBV3
3 1

3 1

1 3
Pin 2-3 close
JUSBV4

Note:
In order to support this function “Power-On system via USB device,” “JUSBV3/ JUSBV4”
jumper cap should be placed on Pin 2-3 individually.

12
 945GC-230/945GC-330
CHAPTER 4: USEFUL HELP
4.1 DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html

13
Motherboard Manual

4.2 AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps Description
1 No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
2
A:
3 Insert next diskette if multiple diskettes are used for recovery
4 Flash Programming successful
5 File read error
7 No Flash EPROM detected
10 Flash Erase error
11 Flash Program error
12 “AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
13
image present in flash device)

POST BIOS Beep Codes

Number of Beeps Description
1 Memory refresh timer error
3 Base memory read/write test error
6 Keyboard controller BAT command failed
7 General exception error (processor exception interrupt error)
8 Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action
1, 3 Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
6, 7 cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
8
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

14
 945GC-230/945GC-330
4.3 EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown

automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU

0protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.

Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

15
Motherboard Manual
4.4 TROUBLESHOOTING
Probable Solution
1. No power to the system at all 1. Make sure power cable is
Power light don’t illuminate, fan securely plugged in.
inside power supply does not turn 2. Replace cable.
on. 3. Contact technical support.
2. Indicator light on keyboard does
not turn on.
System inoperative. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit, the DIMM, press down firmly until the
and hard drive is spinning. module snaps into place.
System does not boot from a hard disk 1. Check cable running from disk to
drive, but can be booted from optical disk controller board. Make sure
drive. both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical 1. Back up data and applications
drive. Hard disks can be read, files.
applications can be used, but system 2. Reformat the hard drive.
fails to boot from a hard disk. Re-install applications and data
using backup disks.
Screen message shows “Invalid Review system’s equipment. Make sure
Configuration” or “CMOS Failure.” correct information is in setup.
System cannot boot after user installs a 1. Set master/slave jumpers
second hard drive. correctly.
2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

16
 945GC-230/945GC-330

This page is intentionally left blank.

17
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen

BGA 437
Unterstützt Hyper-Threading
Intel CPU On-board
CPU Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Extended Memory 64 Technology
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
Chipsatz
Intel ICH7

Grafik Intel GMA 950 Max. 224MB gemeinsam benutzter Videospeicher

ITE 8718F Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung

Super E/A
E/A-Funktionen. Lüfterdrehzahl-Controller

Low Pin Count-Schnittstelle "Smart Guardian"-Funktion von ITE

DDR2 DIMM-Steckplätze x 1

Jeder DIMM unterstützt 256/512 MB & 1/2 GB Einzeln-Kanal DDR2 Speichermodul

Arbeitsspeich
DDR2 registrierte DIMMs. ECC DIMMs werden nicht
er
Max. 2GB Arbeitsspeicher unterstützt.

Unterstützt DDR2 400 / 533

Ultra DMA 33 / 66 / 100 Bus Master-Modus

IDE Integrierter IDE-Controller
Unterstützt PIO-Modus 0~4

Datentransferrate bis zu 3Gb/s

SATA Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0

10 / 100 Mb/s Auto-Negotiation

LAN Realtek RTL8102EL
Halb-/ Vollduplex-Funktion

5.1-Kanal-Audioausgabe
Audio-Codec ALC662
Unterstützt High-Definition Audio

Steckplätze PCI-Steckplatz x1

Onboard-Ans IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke

chluss SATA-Anschluss x2 Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

18
 945GC-230/945GC-330
Spezifikationen

CD-IN-Anschluss x1 Unterstützt die CD Audio-In-Funktion

System-Lüfter-Sockel x2 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen"-Sockel x1

Jeder Anschluss unterstützt 2

USB-Anschluss x2
Fronttafel-USB-Anschlüsse

Stromanschluss (24-polig) x1

Serieller Anschluss x1

PS/2-Tastatur x1

PS/2-Maus x1

Serieller Anschluss x1

Rückseiten-E Druckeranschluss x1

/A VGA-Anschluss x1

LAN-Anschluss x1

USB-Anschluss x4

Audioanschluss x3

Platinengröße 170 mm (B) X 170 mm (L)

Biostar behält sich das Recht vor, ohne

OS-Unterstüt
Windows XP / Vista 32/ Vista 64 Ankündigung die Unterstützung für ein
zung
Betriebssystem hinzuzufügen oder zu entfernen.

19
Motherboard Manual

FRENCH
SPEC

BGA 437 Prend en charge les technologies

Intel CPU On-board Hyper-Threading

UC
Intel Atom N230 CPU (945GC-230) d'exécution de bit de désactivation

Intel Atom N330 CPU (945GC-330) de mémoire étendue 64

Bus frontal 533 MHz

Intel 945GC
Chipset
Intel ICH7

Graphiques Intel GMA 950 Mémoire vidéo partagée maximale de 224 Mo

ITE 8718F Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S Moniteur de matériel
Super E/S
patrimoniales la plus utilisée. Contrôleur de vitesse de ventilateur

Interface à faible compte de broches Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 1

Module de mémoire DDR2 à mode à simple voie
Chaque DIMM prend en charge des DDR2 de
Mémoire Les DIMM à registres et DIMM avec code
256/512 Mo et 1/2 Go
principale correcteurs d'erreurs ne sont pas prises en
Capacité mémoire maximale de 2 Go
charge
Prend en charge la DDR2 400 / 533

Mode principale de Bus Ultra DMA 33 / 66 / 100

IDE Contrôleur IDE intégré
Prend en charge le mode PIO 0~4,

Taux de transfert jusqu'à 3 Go/s.

SATA Contrôleur Serial ATA intégré :
Conforme à la spécification SATA Version 2.0

10 / 100 Mb/s négociation automatique

LAN Realtek RTL8102EL
Half / Full duplex capability

Sortie audio à 5.1 voies

Codec audio ALC662
Prise en charge de l'audio haute définition

Fentes Fente PCI x1

Connecteur Chaque connecteur prend en charge 2

Connecteur IDE x1
embarqué périphériques IDE

Chaque connecteur prend en charge 1

Connecteur SATA x2
périphérique SATA

Prend en charge les équipements du panneau

Connecteur du panneau avant x1
avant

Prend en charge la fonction audio du panneau

Connecteur Audio du panneau avant x1
avant

20
 945GC-230/945GC-330
SPEC

Connecteur d'entrée CD x1 Prend en charge la fonction d'entrée audio de CD

Embase de ventilateur système x2 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Chaque connecteur prend en charge 2 ports USB

Connecteur USB x2
de panneau avant

Connecteur d'alimentation (24 broches) x1

Connecteur de Port série x1

Clavier PS/2 x1

Souris PS/2 x1

Port série x1
E/S du
Port d'imprimante x1
panneau
Port VGA x1
arrière
Port LAN x1

Port USB x4

Fiche audio x3

Dimensions
170mm (l) X 170 mm (H)
de la carte

Biostar se réserve le droit d'ajouter ou de

Support SE Windows XP / Vista 32/ Vista 64
supprimer le support de SE avec ou sans préavis.

21
Motherboard Manual

ITALIAN
SPECIFICA

BGA 437
Supporto di Hyper-Threading
Intel CPU On-board
CPU Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Tecnologia Extended Memory 64
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
Chipset
Intel ICH7
Grafica Intel GMA 950 La memoria video condivisa massima è di 224MB

ITE 8718F Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super I/O Monitoraggio hardware

Super I/O
usate più comunemente. Controller velocità ventolina

Interfaccia LPC (Low Pin Count) Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 1

Ciascun DIMM supporta DDR2 256/512MB Modulo di memoria DDR2 a canale s ingolo
Memoria
e 1/2 GB DIMM registrati e DIMM ECC non sono
principale
Capacità massima della memoria 2GB supportati

Supporto di DDR2 400 / 533

Modalità Bus Master Ultra DMA 33 / 66 / 100

IDE Controller IDE integrato
Supporto modalità PIO Mode 0-4

Velocità di trasferimento dei dati fino a 3

SATA Controller Serial ATA integrato Gb/s.

Compatibile specifiche SATA Versione 2.0.

Negoziazione automatica 10 / 100 Mb/s

LAN Realtek RTL8102EL
Capacità Half / Full Duplex

Codec Uscita audio 5.1 canali

ALC662
audio Supporto audio High-Definit ion (HD)

Alloggi Alloggio PCI x1

Connettori Connettore IDE x1 Ciascun connettore supporta 2 unità IDE

su scheda Connettore SATA x2 Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

22
 945GC-230/945GC-330
SPECIFICA

Connettore CD-in x1 Supporta la funzione input audio CD

Collettore ventolina sistema x2 Alimentazione ventolina di sistema

Collettore cancellaz ione CMOS x1

Ciascun connettore supporta 2 porte USB

Connettore USB x2
pannello frontale

Connettore alimentazione (24 pin) x1

Connettore Porta seriale x1

Tastiera PS/2 x1

Mouse PS/2 x1

Porta seriale x1
I/O
Porta stampante x1
pannello
Porta VGA x1
posteriore
Porta LAN x1

Porta USB x4

Connettore audio x3

Dimension
170 mm (larghezza) x 170 mm (altezza)
i scheda

Sistemi Biostar si riserva il diritto di aggiungere o

operativi Windows XP / Vista 32/ Vista 64 rimuovere il supporto di qualsiasi sistema

supportati operativo senza preavviso.

23
Motherboard Manual

SPANISH
Especificación

BGA 437
Admite Hyper-Threading
Intel CPU On-board
CPU Bit de deshabilitación de ejecución
Intel Atom N230 CPU (945GC-230)
Tecnología Extended Memory 64
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Conjunto de Intel 945GC

chips Intel ICH7

Gráficos Intel GMA 950 Memoria máxima de vídeo compartida de 224MB

ITE 8718F Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de Monitor hardware

Súper E/S
uso más común Súper E/S. Controlador de velocidad de ventilador

Interfaz de cuenta Low Pin Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 1

Cada DIMM admite DDR2 de 256/512 MB y Módulo de memoria DDR2 de canal solo
Memoria
1/2 GB No admite DIMM registrados o DIMM compatibles
principal
Capacidad máxima de memoria de 2GB con ECC

Admite DDR2 de 400 / 533

Modo bus maestro Ultra DMA 33 / 66 / 100

IDE Controlador IDE integrado
Soporte los Modos PIO 0~4.

Tasas de transferencia de hasta 3 Gb/s.

SATA Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0.

Negociación de 10 / 100 Mb/s

Red Local Realtek RTL8102EL
Funciones Half / Full dúplex

Códecs de Salida de sonido de 5.1 canales

ALC662
sonido Soporte de sonido Alta Definición

Ranuras Ranura PCI X1

Conectores Conector IDE X1 Cada conector soporta 2 dispositivos IDE

en placa Conector SATA X2 Cada conector soporta 1 dispositivos SATA

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

24
 945GC-230/945GC-330
Especificación

Conector de entrada de CD X1 Soporta función de entrada de sonido de CD

Cabecera de ventilador de sistema X2 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB X2 Cada conector soporta 2 puertos USB frontales

Conector de alimentación X1

(24 patillas)

Conector Puerto serie X1

Teclado PS/2 X1

Ratón PS/2 X1

Puerto serie X1
Panel
Puerto de impresora X1
trasero de
Puerto VGA X1
E/S
Puerto de red local X1

Puerto USB X4

Conector de sonido X3

Tamaño de
170 mm. (A) X 170 mm. (H)
la placa

Soporte de
Biostar se reserva el derecho de añadir o retirar el
sistema Windows XP / Vista 32/ Vista 64
soporte de cualquier SO con o sin aviso previo.
operativo

25
Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES

BGA 437
Suporta as tecnologias Hyper-Threading
Intel CPU On-board
CPU Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Extended Memory 64
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
Chipset
Intel ICH7

Placa
Intel GMA 950 Memória de vídeo máxima partilhada: 224 MB
gráfica

ITE 8718F Iniciativas para controlo do ambiente

Especificaçã Proporciona as funcionalidades mais utilizadas Monitorização do hardware

o Super I/O em termos da especificação Super I/O. Controlador da velocidade da ventoinha

Interface LPC (Low Pin Count). Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x1

Cada módulo DIMM suporta uma memória Módulo de memória DDR2 de canal único
Memória
DDR2 de 256/512 MB & 1/2 GB Os módulos DIMM registados e os DIMM ECC
principal
Capacidade máxima de memória: 2 GB não são suportados

Suporta módulos DDR2 400 / 533

Modo Bus master Ultra DMA 33 / 66 / 100

IDE Controlador IDE integrado
Suporta o modo PIO 0~4.

Velocidades de transmissão de dados até 3 Gb/s.

SATA Controlador Serial ATA integrado Compatibilidade com a especificação SATA

versão 2.0.

Auto negociação de 10 / 100 Mb/s

LAN Realtek RTL8102EL
Capacidade semi/full-duplex

Codec de Saída de áudio de 5.1 canais

ALC662
som Suporta a especificação High-Definition Audio

Ranhuras Ranhura PCI x1

Conectores Conector IDE x1 Cada conector suporta 2 dispositivos IDE

na placa Conector SATA x2 Cada conector suporta 1 dispositivo SATA

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

26
 945GC-230/945GC-330
ESPECIFICAÇÕES

Conector de áudio frontal x1 Suporta a função de áudio no painel frontal

Conector para entrada de CDs x1 Suporta a entrada de áudio a partir de CDs

Conector da ventoinha do sistema x2 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Cada conector suporta 2 portas USB no painel

Conector USB x2
frontal

Conector de alimentação (24 pinos) x1

Conector da Porta série x1

Teclado PS/2 x1

Rato PS/2 x1

Entradas/S Porta série x1

aídas no Porta para impressora x1

painel Porta VGA x1

traseiro Porta LAN x1

Porta USB x4

Tomada de audio x3

Tamanho
170 mm (L) X 170 mm (A)
da placa

Sistemas A Biostar reserva-se o direito de adicionar ou

operativos Windows XP / Vista 32/ Vista 64 remover suporte para qualquer sistema

suportados operativo com ou sem aviso prévio.

27
Motherboard Manual

POLISH
SPEC

BGA 437
Obsługa Hyper-Threading
Intel CPU On-board
Procesor Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Extended Memory 64 Technology
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
Chipset
Intel ICH7

Maks. wielkość współdzielonej pamięci video

Grafika Intel GMA 950
wynosi 224MB

Gniazda DDR2 DIMM x 1

Każde gniazdo DIMM obsługuje moduły 256/512 Moduł pamięci DDR2 z trybem pojedynczy
Pamięć
MB oraz 1/2 GB DDR2 kanału
główna
Maks. wielkość pamięci 2GB Brak obsługi Registered DIMM oraz ECC DIMM

Obsługa DDR2 400 / 533

ITE 8718F Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje Super Monitor H/W

Super I/O
I/O. Kontroler prędkości wentylatora

Interfejs Low Pin Count Funkcja ITE "Smart Guardian"

Ultra DMA 33 / 66 / 100 Tryb Bus Master

IDE Zintegrowany kontroler IDE
obsługa PIO tryb 0~4

Transfer danych do 3 Gb/s.

SATA Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0.

10 / 100 Mb/s z automatyczną negocjacją

szybkości
LAN Realtek RTL8102EL
Działanie w trybie połowicznego / pełnego

dupleksu

Kodek 5.1 kanałowe wyjście audio

ALC662
dźwiękowy Obsługa High-Definition Audio

Gniazda Gniazdo PCI x1

Złącza Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE

wbudowane Złącze SATA x2 Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego x1 Obsługa elementów panela przedniego

28
 945GC-230/945GC-330
SPEC

Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim

Złącze wejścia CD x1 Obsługa funkcji wejścia audio CD

Złącze główkowe wentylatora

Zasilanie wentylatora systemowego
systemowego x2

Złącze główkowe kasowania CMOS x1

Każde złącze obsługuje 2 porty USB na panelu

Złącze USB x2
przednim

Złącze zasilania (24 pinowe) x1

Złącze Port szeregowy x1

Klawiatura PS/2 x1

Mysz PS/2 x1

Port szeregowy x1

Back Panel Port drukarki x1

I/O Port VGA x1

Port LAN x1

Port USB x4

Gniazdo audio x3

Wymiary
170 mm (S) X 170 mm (W)
płyty

Obsluga
Biostar zastrzega sobie prawo dodawania lub
systemu
Windows XP / Vista 32/ Vista 64 odwoływania obsługi dowolnego systemu
operacyjne
operacyjnego bez powiadomienia.
go

29
Motherboard Manual

RUSSIAN
СПЕЦ

CPU BGA 437

Поддержка технологий Hyper-Threading
(центральн Intel CPU On-board
Execute Disable Bit
ый Intel Atom N230 CPU (945GC-230)
Extended Memory 64 Technology
процессор) Intel Atom N330 CPU (945GC-330)

FSB 533 МГц

Набор Intel 945GC

микросхем Intel ICH7
Максимальная совместно используемая видео
Графика Intel GMA 950
память составляет 224 МБ

Слоты DDR2 DIMM x 1

Модуль памяти с одноканально режимом
Каждый модуль DIMM поддерживает 256/512
Основная DDR2
МБ & 1/2 ГБ DDR2
память Не поддерживает зарегистрированные
Максимальная ёмкость памяти 2 ГБ
модули DIMM and ECC DIMM
Поддержка DDR2 400 / 533
ITE 8718F Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые Аппаратный монитор
Super I/O действующие функциональные возможности Регулятор скорости
Super I/O. Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
Встроенное устройство управления Режим "хозяина" шины Ultra DMA 33 / 66 / 100
IDE
встроенными интерфейсами устройств Поддержка режима PIO 0~4,
Встроенное последовательное устройство скорость передачи данных до 3 гигабит/с.
SATA
управления ATA Соответствие спецификации SATA версия 2.0.

Локальная Автоматическое согласование 10 / 100 Мб/с

Realtek RTL8102EL
сеть Частичная / полная дуплексная способность
Звуковой 5.1канальный звуковой выход
ALC662
кодек Звуковая поддержка High-Definition
Слоты Слот PCI x1
Встроенны Каждый разъём поддерживает 2 встроенных
Разъём IDE x1
й разъём интерфейса накопителей
Каждый разъём поддерживает 1 устройство
Разъём SATA x2
SATA

Разъём на лицевой панели x1 Поддержка устройств на лицевой панели

Поддержка звуковых функций на лицевой
Входной звуковой разъём x1
панели

30
 945GC-230/945GC-330
СПЕЦ

Разъём ввода для CD x1 Поддержка функции ввода для CD

Контактирующее приспособление
Источник питания для вентилятора системы
вентилятора системы x2
Открытое контактирующее
приспособление CMOS x1
Каждый разъём поддерживает 2 USB-порта на
USB-разъём x2
лицевой панели

Разъем питания (24 вывод) x1

Разъём Последовательный порт x1

Клавиатура PS/2 x1
Мышь PS/2 x1
Задняя
Последовательный порт x1
панель
Порт подключения принтера x1
средств
Порт VGA x1
ввода-выв
Порт LAN x1
ода
USB-порт x4
Гнездо для подключения наушников x3
Размер
170 мм (Ш) X 170 мм (В)
панели
Biostar сохраняет за собой право добавлять
Поддержка
Windows XP / Vista 32/ Vista 64 или удалять средства обеспечения для OS с
OS
или без предварительного уведомления.

31
‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫‪BGA 437‬‬
‫‪Hyper-Threading‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Intel CPU On-board‬‬ ‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫‪Execute Disable Bit‬‬
‫)‪Intel Atom N230 CPU (945GC-230‬‬ ‫اﻟﻤﺮآﺰﻳﺔ‬
‫‪Extended Memory 64 Technology‬‬
‫)‪Intel Atom N330 CPU (945GC-330‬‬

‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﻴﺠﺎ هﺮﺗﺰ ‪533‬ﺗﺮدد‬

‫‪Intel 945GC‬‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪Intel ICH7‬‬

‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪224‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬ ‫‪Intel GMA 950‬‬ ‫ﺏﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬

‫‪1‬ﻋﺪد‪DDR2 DIMM‬ﻓﺘﺤﺔ‬

‫ﻡﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫وﺣﻴ ﺪة ﻣﺰدوﺟﺔ‪/‬أﺣﺎدﻳﺔ ‪ DDR2‬ذاآﺮة وﺣﺪة‬
‫ﺑﺎﻳ ﺖ ﺟﻴﺠ ﺎ ‪1/2‬و ﺑﺎﻳ ﺖ‬ ‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 2‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬

‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪ 400 / 533‬ﺳﻌﺎت ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪ITE 8718F‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬ ‫‪Super I/O‬‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫‪Ultra DMA 33 / 66 / 100‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬

‫وﺿﻊ رﺋﻴﺴﻲ‬ ‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬

‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬

‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬

‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬ ‫‪SATA‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬

‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬ ‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬

‫‪Realtek RTL8102EL‬‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬ ‫‪100/10‬‬

‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬

‫‪ALC662‬‬ ‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬

‫ﻋﺪد ‪1‬‬ ‫ﻓﺘﺤﺔ ‪PCI‬‬ ‫اﻟﻔﺘﺤﺎت‬

‫‪IDE‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬ ‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫‪SATA‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة‬ ‫ﻋﺪد ‪2‬‬ ‫ﻡﻨﻔﺬ ‪SATA‬‬ ‫اﻟﻠﻮﺣﺔ‬

‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫‪32‬‬
 ‫‪945GC-230/945GC-330‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻡﺞ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪CD-IN‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬ ‫ﻋﺪد ‪2‬‬ ‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬ ‫ﻋﺪد ‪2‬‬ ‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬ ‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد‬ ‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬ ‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪VGA‬‬ ‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪4‬‬ ‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪3‬‬ ‫ﻡﻘﺒﺲ ﺹﻮت‬

‫‪ 170‬ﻡﻢ )ﻋﺮض( ‪ 170 X‬ﻡﻢ )ارﺗﻔﺎع(‬ ‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬

‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬

‫‪Windows XP / Vista 32/ Vista 64‬‬ ‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬

‫‪33‬‬
Motherboard Manual

JAPANESE
仕様

BGA 437
Hyper-Threading
Intel CPU On-board
CPU Execute Disable Bit
Intel Atom N230 CPU (945GC-230)
Extended Memory 64 Technology
Intel Atom N330 CPU (945GC-330)

FSB 533 MHz

Intel 945GC
チップセット
Intel ICH7

グラフィック
Intel GMA 950 最大の共有ビデオメモリは224MBです
ス

DDR2 DIMMスロット x 1

各DIMMは256/512 MB & 1/2 GB DDR2をサポート 単一 チャンネルモードDDR2メモリモジュール

メインメモリ
最大メモリ容量2GB 登録済みDIMMとECC DIMMはサポートされません

DDR2 400 / 533 をサポート

ITE 8718F 環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O機能を H/Wモニター

Super I/O
採用しています。 ファン速度コントローラ/ モニター

低ピンカウントインターフェイス ITEの「スマートガーディアン」機能

Ultra DMA 33 / 66 / 100バスマスタモード

IDE 統合IDEコントローラ
PIO Mode 0~4のサポート

最高3 Gb/秒のデータ転送速度
SATA 統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠。

10 / 100 Mb/秒のオートネゴシエーション
10/100 LAN Realtek RTL8102EL
半/全二重機能

サウンド 5.1チャンネルオーディオアウト
ALC662
Codec ハイデフィニションオーディオのサポート

スロット PCIスロット x1

オンボードコ IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします

ネクタ SATAコネクタ x2 各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

34
 945GC-230/945GC-330
仕様

CDインコネクタ x1 CDオーディオイン機能をサポートします

システムファンヘッダ x2 システムファン電源装置

CMOSクリアヘッダ x1

各コネクタは2つのフロントパネルUSBポートをサポ
USBコネクタ x2
ートします

電源コネクタ(24ピン) x1

シリアルポートコネクタ x1

PS/2キーボード x1

PS/2マウス x1

シリアルポート x1

背面パネル プリンタポート x1

I/O VGAポート x1

LANポート x1

USBポート x4

オーディオジャック x3

ボードサイズ 170 mm (幅) X 170 mm (高さ)

Biostarは事前のサポートなしにOSサポートを追加ま
OSサポート Windows XP / Vista 32/ Vista 64
たは削除する権利を留保します。

2008/12/30

35