MAKING MODERN LIVING POSSIBLE

Data sheet

ELIMINATOR® liquid line filter drier

Types DCL and DML

All ELIMINATOR® driers have a solid core

with binding material held to an absolute
minimum.

There are two types of ELIMINATOR® cores.

Type DML driers have a core composition
of 100% Molecular Sieve, while type DCL
contain 80% Molecular Sieve with 20%
activated alumina.

ELIMINATOR® type DML driers are designed

for applications requiring the highest
moisture capacity.

ELIMINATOR® type DCL driers are designed

for applications requiring high moisture
capacity and acid adsorption capacity.

Available with solder (pure copper) and flare

connections.

Features The Core type DML The Shell

yy 100% 3Å Molecular Sieve core, yy UL approved for MWP 667 psig,

yy High drying capacity minimizing the risk yy Available with solder (pure copper) and flare
of acid formation (hydrolysis), connections,
yy Recommended for use with HFC and HCFC yy Corrosion resistant powder-painted finish.
refrigerants, Special coating for marine applications
yy Will not deplete oil additives. available upon request,
yy Allows installation with any orientation
The Core type DCL provided the arrow is in the flow direction,
yy Available in sizes from 3 – 75 cubic inches.
yy 80% 3Å Molecular Sieve with 20% activated
alumina, The Filter
yy Perfect core blend for systems that operate
at high condensing temperatures and require yy 25 µm (0.001 in.) filter provides high retention
high drying capacity. with minimal pressure drop,
yy Thermally stable up to 250 °F.

Approvals UL US, file no. SA 6398

PED 97/23/EC - a3p3

DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Application ELIMINATOR® liquid line filter driers protect With these contaminants eliminated, systems
refrigeration and air-conditioning systems are safer from harmful chemical reactions
from moisture, acids, and solid particles. and from abrasive impurities.

R64-2104.10
Danfoss
TE2
KP 61

EVR

SGN / SGI GBC GBC

DML / DCL

Technical data Surface and volume

Solid core Solid core Filter drier volume Filter drier volume
Filter surface volume (shell volume) (net. volume)
[in2] [in3] [fl. oz.] [fl. oz.]
DML/DCL 03 13 3 2.7 1.28
DML/DCL 05 15 4 4.0 1.72
DML/DCL 08 20 6 5.7 2.18
Flare connection DML/DCL 16 34 14 12.0 4.11
DML/DCL 30 59 30 24.3 7.58
DML/DCL 41 79 42 32.7 9.66
DML/DCL 60 117 60 45.3 11.89
DML/DCL 75 158 83 61.3 15.23

Solder connection Acid capacity Temperature range

(copper) -40 – 70 °C (-40 – 160 °F)
Acid capacity
Filter
[oz.]
DCL 03 0.02
DCL 05 0.03
DCL 08 0.05
DCL 16 0.11
DCL 30 0.23
DCL 41 0.31
DCL 60 0.45
DCL 75 0.63

2 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Technical data and capacities

Drying and liquid capacity, type DML

Drying capacity [lb] refrigerant 1) Liquid capacity [TR] 2)

Max.
R134a R404A R507 R22 R407C R410A Working
Type Pressure
[°F] R134a R404A R507 R22 R407C R410A MWP
75 125 75 125 75 125 75 125 75 125 75 125 [psig]
DML 032/032s 10.9 10.3 11.8 11.2 12.0 11.1 11.1 10.3 11.0 10.1 10.0 9.2 1.90 1.42 1.38 2.12 2.02 2.11 667
DML 032.5s 10.9 10.3 11.8 11.2 12.0 11.1 11.1 10.3 11.0 10.1 10.0 9.2 2.73 1.98 1.92 2.99 2.84 2.93 667
DML 033/033s 10.9 10.3 11.8 11.2 12.0 11.1 11.1 10.3 11.0 10.1 10.0 9.2 3.65 2.80 2.72 4.11 3.94 4.17 667
DML 034s 10.9 10.3 11.8 11.2 12.0 11.1 11.1 10.3 11.0 10.1 10.0 9.2 7.03 5.72 5.56 8.13 7.86 8.57 667
DML 052/052s 17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6 2.18 1.60 1.55 2.40 2.28 2.37 667
DML 052.5s 17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6 2.72 1.99 1.93 3.00 2.85 2.95 667
DML 053/053s 17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6 3.66 2.79 2.71 4.10 3.92 4.15 667
DML 054s 17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6 7.31 5.91 5.74 8.43 8.14 8.83 667
DML 055s 17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6 10.30 8.26 8.03 11.84 11.42 12.35 667
DML 082/082s 27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4 2.18 1.55 1.50 2.37 2.23 2.28 667
DML 082.5s 27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4 3.00 2.23 2.16 3.32 3.16 3.31 667
DML 083/083s 27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4 4.03 3.12 3.03 4.56 4.37 4.65 667
DML 084/084s 27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4 8.14 6.07 5.88 9.03 8.60 8.99 667
DML 085/085s 27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4 12.46 10.04 9.76 14.35 13.85 15.02 667
DML 162/162s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 2.18 1.54 1.50 2.36 2.23 2.28 667
DML 162.5s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 3.01 2.09 2.02 3.23 3.04 3.08 667
DML 163/163s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 4.64 3.18 3.08 4.95 4.64 4.67 667
DML 164/164s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 9.15 6.69 6.49 10.07 9.55 9.90 667
DML 165/165s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 12.69 10.41 10.12 14.74 14.26 15.59 667
DML 166/166s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 12.95 10.63 10.34 15.04 14.56 15.93 500
DML 167s 61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4 12.49 11.41 11.14 15.21 15.01 17.34 500
DML 303/303s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 4.46 3.00 2.90 4.72 4.41 4.40 667
DML 304/304s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 9.24 7.11 6.90 10.41 9.97 10.58 667
DML 305/305s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 13.00 10.51 10.22 14.99 14.48 15.72 667
DML 306/306s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 12.43 11.34 11.07 15.13 14.92 17.22 667
DML 307s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 18.27 15.34 14.93 21.44 20.84 23.05 667
DML 309s 127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9 23.78 19.84 19.31 27.83 27.02 29.79 667
DML 413 171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3 5.23 3.54 3.42 5.54 5.19 5.19 667
DML 414/414s 171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3 9.49 7.52 7.31 10.85 10.44 11.23 667
DML 415/415s 171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3 15.78 11.90 11.54 17.61 16.80 17.66 667
DML 417s 171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3 18.98 16.01 15.59 22.32 21.71 24.08 500
DML 419s 171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3 27.10 21.69 21.08 31.11 29.99 32.42 435
DML 604s 257.6 243.5 276.9 262.5 281.9 260.4 260.9 241.2 258.2 238.6 235.0 216.5 7.93 7.45 7.29 9.77 9.69 11.37 667
DML 607s 257.6 243.5 276.9 262.5 281.9 260.4 260.9 241.2 258.2 238.6 235.0 216.5 19.93 19.94 19.54 25.16 25.22 30.71 667
DML 609s 257.6 243.5 276.9 262.5 281.9 260.4 260.9 241.2 258.2 238.6 235.0 216.5 17.45 20.77 20.59 23.25 23.99 33.37 667
DML 757s 352.3 333.0 378.7 359.0 385.5 356.1 356.8 329.9 353.0 326.2 321.3 296.1 24.16 20.39 19.85 28.42 27.65 30.66 500
DML 759s 352.3 333.0 378.7 359.0 385.5 356.1 356.8 329.9 353.0 326.2 321.3 296.1 23.95 24.79 24.34 30.61 30.86 38.41 435
1)
Drying capacity is based on following moisture 2)
Given in accordance with ARI 710-2004 for
content test standards before and after drying: te= 5 °F
– R134a: 1050 ppm W – 50 ppm W. tc= 85 °F
– R404A, R507: 1020 ppm W – 50 ppm W. ∆p = 1 psig
– R407C: 1020 ppm W – 50 ppm W.
– R410A: 1050 ppm W – 50 ppm W.
– R22: 1050 ppm W – 60 ppm W
in accordance with ARI 710-2004.

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 3

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Technical data and capacities (continued)

Drying and liquid capacity, type DCL

Drying capacity [lb] refrigerant 1) Liquid capacity [TR] 2) Max.

R134a R404A R507 R22 R407C R410A Working
Type Pressure
[°F] R134a R404A R507 R22 R407C R410A MWP
75 125 75 125 75 125 75 125 75 125 75 125 [psig]
DCL 032/032s 8.5 8.0 9.1 8.7 9.3 8.6 8.6 8.0 8.5 7.9 7.8 7.2 1.90 1.42 1.38 2.12 2.02 2.11 667
DCL 032.5s 8.5 8.0 9.1 8.7 9.3 8.6 8.6 8.0 8.5 7.9 7.8 7.2 2.73 1.98 1.92 2.99 2.84 2.93 667
DCL 033/033s 8.5 8.0 9.1 8.7 9.3 8.6 8.6 8.0 8.5 7.9 7.8 7.2 3.65 2.80 2.72 4.11 3.94 4.17 667
DCL 052/052s 13.6 12.8 14.6 13.8 14.9 13.7 13.8 12.7 13.6 12.6 12.4 11.4 2.18 1.60 1.55 2.40 2.28 2.37 667
DCL 052.5s 13.6 12.8 14.6 13.8 14.9 13.7 13.8 12.7 13.6 12.6 12.4 11.4 2.72 1.99 1.93 3.00 2.85 2.95 667
DCL 053/053s 13.6 12.8 14.6 13.8 14.9 13.7 13.8 12.7 13.6 12.6 12.4 11.4 3.66 2.79 2.71 4.10 3.92 4.15 667
DCL 082/082s 21.7 20.5 23.3 22.1 23.8 21.9 22.0 20.3 21.8 20.1 19.8 18.2 2.18 1.55 1.50 2.37 2.23 2.28 667
DCL 082.5s 21.7 20.5 23.3 22.1 23.8 21.9 22.0 20.3 21.8 20.1 19.8 18.2 3.00 2.23 2.16 3.32 3.16 3.31 667
DCL 083/083s 21.7 20.5 23.3 22.1 23.8 21.9 22.0 20.3 21.8 20.1 19.8 18.2 4.03 3.12 3.03 4.56 4.37 4.65 667
DCL 084/084s 21.7 20.5 23.3 22.1 23.8 21.9 22.0 20.3 21.8 20.1 19.8 18.2 8.14 6.07 5.88 9.03 8.60 8.99 667
DCL 162/162s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 2.18 1.54 1.50 2.36 2.23 2.28 667
DCL 162.5s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 3.01 2.09 2.02 3.23 3.04 3.08 667
DCL 163/163s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 4.64 3.18 3.08 4.95 4.64 4.67 667
DCL 164/164s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 9.15 6.69 6.49 10.07 9.55 9.90 667
DCL 165/165s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 12.69 10.41 10.12 14.74 14.26 15.59 667
DCL 166/166s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 12.95 10.63 10.34 15.04 14.56 15.93 500
DCL 167s 47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1 12.49 11.41 11.14 15.21 15.01 17.34 500
DCL 303/303s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 4.46 3.00 2.90 4.72 4.41 4.40 667
DCL 304/304s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 9.24 7.11 6.90 10.41 9.97 10.58 667
DCL 305/305s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 13.00 10.51 10.22 14.99 14.48 15.72 667
DCL 306/306s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 12.43 11.34 11.07 15.13 14.92 17.22 667
DCL 307s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 18.27 15.34 14.93 21.44 20.84 23.05 667
DCL 309s 100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4 23.78 19.84 19.31 27.83 27.02 29.79 667
DCL 413 139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3 5.23 3.54 3.42 5.54 5.19 5.19 667
DCL 414/414s 139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3 9.49 7.52 7.31 10.85 10.44 11.23 667
DCL 415/415s 139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3 15.78 11.90 11.54 17.61 16.80 17.66 667
DCL 417s 139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3 18.98 16.01 15.59 22.32 21.71 24.08 500
DCL 419s 139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3 27.10 21.69 21.08 31.11 29.99 32.42 435
DCL 604s 200.9 189.9 216.0 204.8 219.9 203.1 203.5 188.2 201.4 186.1 183.3 168.9 7.93 7.45 7.29 9.77 9.69 11.37 667
DCL 607s 200.9 189.9 216.0 204.8 219.9 203.1 203.5 188.2 201.4 186.1 183.3 168.9 19.93 19.94 19.54 25.16 25.22 30.71 667
DCL 609s 200.9 189.9 216.0 204.8 219.9 203.1 203.5 188.2 201.4 186.1 183.3 168.9 17.45 20.77 20.59 23.25 23.99 33.37 667
DCL 757s 279.1 263.8 300.0 284.4 305.4 282.1 282.7 261.3 279.7 258.4 254.5 234.5 24.16 20.39 19.85 28.42 27.65 30.66 500
DCL 759s 279.1 263.8 300.0 284.4 305.4 282.1 282.7 261.3 279.7 258.4 254.5 234.5 23.95 24.79 24.34 30.61 30.86 38.41 435
1)
Drying capacity is based on following moisture 2)
Given in accordance with ARI 710-2004 for
content test standards before and after drying: te= 5 °F
– R134a: 1050 ppm W – 50 ppm W. tc= 85 °F
– R404A, R507: 1020 ppm W – 50 ppm W. ∆p = 1 psig
– R407C: 1020 ppm W – 50 ppm W.
– R410A: 1050 ppm W – 50 ppm W.
– R22: 1050 ppm W – 60 ppm W
in accordance with ARI 710-2004.

Conversions (lbs of refrigerant × (Initial PPM of water - Final PPM of water))

Drops of water =
110

See ARI standard 710-2004 for recommended initial and final PPM values for different refrigerants.

4 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Ordering Type DCL flare

Industrial pack
Conn. Multi pack
for OEM only
Type
[in.] [mm] Code no. Qty. Code no. Qty.

DCL 032 1
/4 6 023Z5000 1)
32 — 28

DCL 032 1
/4 6 023Z5075 32 — 28

DCL 033 3
/8 10 023Z5001 1) 32 — 28

DCL 033 3
/8 10 023Z5089 32 — 16

DCL 052 1
/4 6 023Z5002 24 023Z8002 16

DCL 053 3
/8 10 023Z5003 24 023Z8003 16

DCL 082 1
/4 6 023Z5004 24 023Z8004 16

DCL 083 3
/8 10 023Z5005 24 023Z8005 16

DCL 084 1
/2 12 023Z5006 24 — —

DCL 162 1
/4 6 023Z5007 12 023Z8007 12

DCL 163 3
/8 10 023Z5008 12 023Z8008 12

DCL 164 1
/2 12 023Z5009 12 023Z8009 12

DCL 165 5
/8 16 023Z5010 12 023Z8010 12

DCL 166 3
/4 19 023Z5011 12 — 12

DCL 303 3
/8 10 023Z0012 8 — 8

DCL 304 1
/2 12 023Z0013 8 023Z3013 8

DCL 305 5
/8 16 023Z0014 8 023Z3014 8

DCL 306 3
/4 19 023Z0156 8 — —

DCL 414 1
/2 12 023Z0102 8 — 6

DCL 415 5
/8 16 023Z0103 8 — 6
1)
Wire mesh in filter drier outlet

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 5

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Ordering Type DCL Solder (copper)

(continued)
Industrial pack Industrial pack
Conn. Multi pack Conn. Multi pack
Type for OEM only for OEM only

[in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty.

DCL 032s 1
/4 023Z5013 1)
32 023Z8013 1)
28 3 — 32 023Z0692 28

DCL 032.5s 5
/16 023Z5014 32 — 28 8 — 32 — 28

DCL 033s 3
/8 023Z5015 32 — 28 10 023Z5016 32 — 28

DCL 052s 1
/4 023Z5018 24 — 16 6 — 24 — 16

DCL 053s 3
/8 023Z5019 24 023Z8011 16 10 023Z5020 24 — 16

DCL 082s 1
/4 023Z5022 24 — 16 6 — 24 — 16

DCL 083s 3
/8 023Z5023 24 023Z8023 16 10 023Z5024 24 — 16

DCL 084s 1
/2 023Z5026 24 023Z8026 16 12 023Z5025 24 — 16

DCL 085s 5
/8 023Z5145 24 — — — — — — —

DCL 162s 1
/4 023Z5028 12 — 12 — — 12 — 12

DCL 163s 3
/8 023Z5029 12 — 12 10 023Z5030 12 — 12

DCL 164s 1
/2 023Z5032 12 023Z8032 12 12 023Z5031 12 — 12

DCL 165s 5
/8 023Z5033 12 — 12 12 — 12 — 12

DCL 166s 3
/4 023Z5070 12 — 12 — — 12 — 12

DCL 167s 7
/8 023Z5034 12 — 12 — — 12 — 12

DCL 303s 3
/8 023Z0030 8 — 8 10 — 8 — 8

DCL 304s 1
/2 023Z0031 8 — 8 12 — 8 — 8

DCL 305s 5
/8 023Z0032 8 023Z3032 8 16 — 8 — 8

DCL 306s 3
/4 023Z0033 8 — 8 18 023Z0216 8 — 8

DCL 307s 7
/8 023Z0034 8 — 8 22 — 8 — 8

DCL 309s 1 1/8 023Z0035 8 — 8 28 — 8 — 8

DCL 414s 1
/2 023Z0104 8 — 6 12 — 8 — 6

DCL 415s 5
/8 023Z0105 8 — 6 16 — 8 — 6

DCL 417s 7
/8 023Z0106 8 — 6 22 — 8 — 6

DCL 419s 1 1/8 023Z0107 8 — 6 28 — 8 — 6

DCL 607s 7
/8 023Z0036 12 — — 22 — 12 — —

DCL 609s 1 1/8 023Z0037 12 — — 28 — 12 — —

DCL 757s 7
/8 023Z0115 12 — 4 22 — 12 — 4

DCL 759s 1 1/8 023Z0116 12 — 4 28 — 12 — 4

1)
Wire mesh in filter drier outlet

6 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Ordering Type DML Flare

(continued)
Industrial pack
Conn. Multi pack
Type for OEM only

[in.] [mm] Code no. Qty. Code no. Qty.

DML 032 1
/4 6 023Z5035 1) 32 023Z8035 1) 28

DML 033 3
/8 10 023Z5036 1)
32 023Z8036 1)
28

DML 033 3
/8 10 023Z5090 32 — 28

DML 052 1
/4 6 023Z5037 24 023Z8037 16

DML 053 3
/8 10 023Z5038 24 023Z8038 16

DML 082 1
/4 6 023Z5039 24 023Z8039 16

DML 083 3
/8 10 023Z5040 24 023Z8040 16

DML 084 1
/2 12 023Z5041 24 023Z8041 16

DML 085 5
/8 16 023Z5073 24 — 16

DML 162 1
/4 6 023Z5042 12 023Z8042 12

DML 163 3
/8 10 023Z5043 12 023Z8043 12

DML 164 1
/2 12 023Z5044 12 023Z8044 12

DML 165 5
/8 16 023Z5045 12 023Z8045 12

DML 166 3
/4 19 023Z5046 12 — 12

DML 303 3
/8 10 023Z0049 8 023Z3049 8

DML 304 1
/2 12 023Z0050 8 023Z3050 8

DML 305 5
/8 16 023Z0051 8 023Z3051 8

DML 306 3
/4 19 023Z0193 8 023Z3193 8

DML 385 5
/8 16 023Z0189 8 — —

DML 413 3
/8 10 023Z0108 8 — 6

DML 414 1
/2 12 023Z0109 8 — 6

DML 415 5
/8 16 023Z0110 8 023Z3110 6

DML 416 3
/4 19 023Z0195 8 023Z0210 6

1)
Wire mesh in filter drier outlet

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 7

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Ordering Type DML solder (copper)

(continued)
Industrial pack Industrial pack
Conn. Multi pack Conn. Multi pack
Type for OEM only for OEM only

[in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty.

DML 032s 1
/4 023Z5048 1) 32 023Z8048 1) 28 6 — 32 023Z8047 28

DML 032s — — — — — — — 3 023Z8027 28

DML 032.5s 5
/16 023Z5049 32 — 28 8 — 32 — 28

DML 033s 3
/8 023Z5050 32 023Z8050 28 10 023Z5051 32 — 28

DML 034s 1
/2 023Z5121 32 — 28 12 — 32 — 28

DML 052s 1
/4 023Z5053 24 — 16 6 023Z5052 24 — 16

DML 053s 3
/8 023Z5054 24 023Z8054 16 10 023Z5055 24 023Z8055 16

DML 054s 1
/2 023Z5101 24 — 16 3.8 — 24 023Z3177 16

DML 055s 5
/8 023Z5100 24 — 16 16 023Z5100 24 — 16

DML 082s 1
/4 023Z5057 24 — 16 6 — 24 — 16

DML 082.5s 5
/16 023Z5117 24 — 16 8 — 24 — 16

DML 083s 3
/8 023Z5058 24 — 16 10 023Z5059 24 — 16

DML 084s 1
/2 023Z5061 24 — 16 12 023Z5060 24 — 16

DML 085s 5
/8 023Z5072 24 — 16 16 — 24 — 16

DML 162s 1
/4 023Z5063 12 — 12 6 — 12 — 12

DML 163s 3
/8 023Z5064 12 — 12 10 023Z5065 12 — 12

DML 164s 1
/2 023Z5067 12 023Z8067 12 12 023Z5066 12 — 12

DML 165s 5
/8 023Z5068 12 023Z8068 12 16 — 12 — 12

DML 166s 3
/4 023Z5071 12 023Z8071 12 19 — 12 — 12

DML 167s 7
/8 023Z5069 12 — 12 22 — 12 — 12

DML 303s 3
/8 023Z0067 8 — 8 10 — 8 — 8

DML 304s 1
/2 023Z0068 8 — 8 12 — 8 — 8

DML 305s 5
/8 023Z0069 8 023Z3069 8 16 — 8 — 8

DML 306s 3
/4 023Z0070 8 — 8 19 — 8 — 8

DML 307s 7
/8 023Z0071 8 023Z3071 8 22 — 8 — 8

DML 309s 1 /8 1
023Z0072 8 — 8 28 — 8 — 8

DML 414s 1
/2 023Z0111 8 — 6 12 — 8 — 6

DML 415s 5
/8 023Z0112 8 — 6 16 — 8 — 6

DML 416s 3
/4 — — — — 19 023Z8246 8 — —

DML 417s 7
/8 023Z0113 8 — 6 22 — 8 — 6

DML 419s 1 1/8 023Z0114 8 023Z3114 6 28 — 8 — 6

DML 604s 1
/2 — 12 — — 12 — 12 — —

DML 607s 7
/8 023Z0073 12 — — 22 — 12 — —

DML 609s 1 1/8 023Z0074 12 — — 28 — 12 — —

DML 757s 7
/8 023Z0117 12 — 4 22 — 12 — 4

DML 759s 1 /8 1
023Z0118 12 — 4 28 — 12 — 4
1)
Wire mesh in filter drier outlet

8 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Identification Type codes

Filter drier D —

C 80 / 20% composite core

Solid core
M 100% Molecular Sieve core

Application L Liquid line

03 3 in3

05 5 in3

08 8 in3

16 16 in3
Size (volume)
30 30 in3

41 41 in3

60 60 in3

75 75 in3

2 /4 in. / 6 mm
1

2.5 /16 in. / 8 mm

5

3 3
/8 in. / 10 mm

Connection (filter connection 4 /2 in. / 12 mm

1

in 1/8 of an inch increments) 5 /8 in. / 16 mm

5

6 3
/4 in. / 18 (19) mm

7 /8 in. / 22 mm
7

9 1 1/8 in. / 28 mm

(blank) Flare connection

Connection type
s Solder connection

Example for type codes

D C L 05 3 s

↓ ↓ ↓ ↓ ↓ ↓
Filter drier

Solid core

Application

Size (volume)

Connection (filter connection

Connection type
in 1/8 of an inch increments)

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 9

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Selection Type selection is made considering the application

DCL DML

HFC Recommended Recommended

Refrigerant
HCFC Recommended Recommended

Mineral or AB Recommended Recommended

Oil POE or PAG, pure Recommended Recommended

POE or PAG, with additives Not recommended 1) Recommended

1)
DCL filter driers contain activated alumina, which is a polar
material used for acid adsorption. Many oil additives are
also polar substances and can be adsorbed by the activated
alumina, rendering them useless, and reducing the drier’s
acid capacity, though this is not harmful to the system.

Example c. Result
Select the appropriate type (DML or DCL) based DML 163 or DML 163s can be used.
on refrigerant and oil type. Then select the drier
size based on the adsorption and liquid capacity If the initial moisture content is very small
required. or a planned change of the filter drier
is considered, a smaller filter drier size
a. Amount of charge: 55 lbs R134a at tL = 75 °F can be chosen.
To dry 55 lbs R134a at 75 °F from 1050 to
60 ppm moisture, a DML 16 is necessary.

b. Cooling capacity: Qe = 5.7 TR

To obtain a mass flow corresponding to 5.7
TR cooling capacity with a DML 16 filter drier,
a 3/8 in. connection must be chosen.
Larger connections can be chosen in
accordance with the liquid line dimension.

Drying capacity [lb] refrigerant 1) Liquid capacity [TR] 2)

Max.
R404A R22, R407C Working
R134a
Type R507 R410A R22 Pressure
R404A
[°F] R134a R407C MWP
R507
R410A [psig]
75 125 75 125 75 125
DML 032/032s 12.1 11.0 16.5 9.9 9.9 8.8 2.0 1.4 2.0 667
DML 032.5s 12.1 11.0 16.5 9.9 9.9 8.8 2.6 2.0 2.6 667
DML 033/033s 12.1 11.0 16.5 9.9 9.9 8.8 4.9 3.7 5.4 667
DML 034s 12.1 11.0 16.5 9.9 9.9 8.8 6.9 4.9 7.4 667
DML 162/162s 59.5 56.2 95.9 52.9 59.5 50.7 2.0 1.4 2.3 667
DML 162.5s 59.5 56.2 95.9 52.9 59.5 50.7 2.6 2.3 3.1 667
DML 163/163s 59.5 56.2 95.9 52.9 59.5 50.7 6.3 4.6 6.9 667
DML 164/164s 59.5 56.2 95.9 52.9 59.5 50.7 8.6 6.3 9.4 667
DML 165/165s 59.5 56.2 95.9 52.9 59.5 50.7 12.3 8.6 13.4 667
DML 166/166s 59.5 56.2 95.9 52.9 59.5 50.7 12.6 8.8 13.7 507
DML 167s 59.5 56.2 95.9 52.9 59.5 50.7 12.6 8.8 13.7 507

10 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Design / Function DML / DCL 03 DML / DCL 05

DML / DCL 08, DML / DCL 16 DML / DCL 30, DML / DCL 41

23Z22.10.13
Danfoss

DML / DCL 60, DML / DCL 75

1. Inlet
2. Spring
3. Solid core
4. Polyester mat
5. Perforated plate
6. Seal cap, flare connection
7. Seal cap, solder
connection

The relatively large diameter of the filter drier Powder formation is eliminated because the
means that the liquid flow velocity is suitably solid core grains are bonded and cannot
low and the pressure drop minimal. move against each other.

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 11

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Dimensions [in.] Flare connections

and weights [lb]

Type A A1 A2 L D1 D2 Net weight

DCL/DML 032 2.60 1.30 1.30 4.33 1.81 1.69 0.38

DCL/DML 033 2.60 1.30 1.30 4.84 1.81 1.69 0.45

Type A A1 A2 L D1 D2 Net weight

DCL/DML 052 2.95 0.96 1.99 4.69 2.28 2.13 0.54

DCL/DML 053 2.95 0.96 1.99 5.20 2.28 2.13 0.61

12 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Dimensions [in.] Flare connections

and weights [lb]
(continued)

Type A A1 A2 L D1 D2 Net weight

DCL/DML 082 3.98 1.99 1.99 5.71 2.28 2.13 0.69

DCL/DML 083 3.98 1.99 1.99 6.22 2.28 2.13 0.76

DCL/DML 084 3.98 1.99 1.99 6.54 2.28 2.13 0.84

DML 085 3.98 1.99 1.99 6.89 2.28 2.13 0.94

DCL/DML 162 4.33 2.17 2.17 6.06 3.15 2.99 1.43

DCL/DML 163 4.33 2.17 2.17 6.57 3.15 2.99 1.47

DCL/DML 164 4.33 2.17 2.17 6.89 3.15 2.99 1.52

DCL/DML 165 4.33 2.17 2.17 7.24 3.15 2.99 1.56

DCL/DML 166 4.33 2.17 2.17 7.17 3.15 2.99 1.61

Type A L D1 D2 Net weight

DCL/DML 303 7.32 9.57 3.15 2.99 2.59

DCL/DML 304 7.32 9.88 3.15 2.99 2.96

DCL/DML 305 7.32 10.24 3.15 2.99 3.26

DCL/DML 306 7.32 10.16 3.15 2.99 3.33

DCL/DML 413 7.36 9.61 3.66 3.50 3.95

DCL/DML 414 7.36 9.92 3.66 3.50 4.04

DCL/DML 415 7.36 10.28 3.66 3.50 4.06

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 13

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Dimensions [in.] Solder connections

and weights [lb]
(continued)

Type A A1 A2 B L D1 D2 Net weight

DCL/DML 032s 2.60 1.30 1.30 3.23 3.86 1.81 1.69 0.34

DCL/DML 032.5s 2.60 1.30 1.30 3.31 4.02 1.81 1.69 0.37

DCL/DML 033s 2.60 1.30 1.30 3.35 4.09 1.81 1.69 0.36

DCL/DML 034s 2.60 1.30 1.30 3.43 4.25 1.81 1.69 0.37

Type A A1 A2 B L D1 D2 Net weight

DCL/DML 052s 2.95 0.96 1.99 3.58 4.21 2.28 2.13 0.49

DCL/DML 052.5s 2.95 0.96 1.99 3.66 4.37 2.28 2.13 0.52

DCL/DML 053s 2.95 0.96 1.99 3.70 4.45 2.28 2.13 0.50

DML 054s 2.95 0.96 1.99 3.78 4.61 2.28 2.13 0.52

DML 055s 2.95 0.96 1.99 3.90 4.84 2.28 2.13 0.53

14 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Dimensions [in.] Solder connections

and weights [lb]
(continued)

Type A A1 A2 B L D1 D2 Net weight

DCL/DML 082s 3.98 1.99 1.99 4.61 5.24 2.28 2.13 0.64

DCL/DML 082.5s 3.98 1.99 1.99 4.69 5.39 2.28 2.13 0.67

DCL/DML 083s 3.98 1.99 1.99 4.72 5.47 2.28 2.13 0.65

DCL/DML 084s 3.98 1.99 1.99 4.80 5.63 2.28 2.13 0.71

DML 085s 3.98 1.99 1.99 4.92 5.87 2.28 2.13 0.73

DCL/DML 162s 4.33 2.17 2.17 4.96 5.59 3.15 2.99 1.36

DCL/DML 162.5s 4.33 2.17 2.17 5.04 5.75 3.15 2.99 1.39

DCL/DML 163s 4.33 2.17 2.17 5.08 5.83 3.15 2.99 1.38

DCL/DML 164s 4.33 2.17 2.17 5.16 5.98 3.15 2.99 1.41

DCL/DML 165s 4.33 2.17 2.17 5.28 6.22 3.15 2.99 1.42

DCL/DML 166s 4.33 2.17 2.17 5.51 6.69 3.15 2.99 1.45

DCL/DML 167s 4.33 2.17 2.17 5.35 6.77 3.15 2.99 1.47

© Danfoss A/S (AC-MCI /jmn), 2013-08 DKRCC.PD.E00.A1.22 / 520H7438 15

Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML

Dimensions [in.] Solder connections

and weights [lb]
(continued)

Type A B L D1 D2 Net weight

DCL/DML 303s 7.32 8.07 8.82 3.15 2.99 2.86

DCL/DML 304s 7.32 8.15 8.98 3.15 2.99 2.91

DCL/DML 305s 7.32 8.27 9.21 3.15 2.99 2.92

DCL/DML 306s 7.32 8.50 9.69 3.15 2.99 2.93

DCL/DML 307s 7.32 8.35 9.76 3.15 2.99 2.96

DCL/DML 309s 7.32 8.15 9.80 3.15 2.99 2.98

DCL/DML 414s 7.36 8.19 9.02 3.66 3.50 3.92

DCL/DML 415s 7.36 8.31 9.25 3.66 3.50 3.94

DCL/DML 417s 7.36 8.39 9.80 3.66 3.50 4.01

DCL/DML 419s 7.36 8.19 9.84 3.66 3.50 4.03

DCL/DML 604s 13.27 14.09 14.92 3.15 2.99 4.94

DCL/DML 607s 13.27 14.29 14.71 3.15 2.99 4.98

DCL/DML 609s 13.27 14.09 14.75 3.15 2.99 5.03

DCL/DML 757s 13.31 14.33 15.75 3.66 3.50 6.98

DCL/DML 759s 13.31 14.13 15.79 3.66 3.50 7.00

16 DKRCC.PD.E00.A1.22 / 520H7438 © Danfoss A/S (AC-MCI /jmn), 2013-08