Scribd
Upload
53 views1 page

Ocr: Relay1: Phase INST Ground INST

This document summarizes the overcurrent relay settings for three relays. Relay 1 is an ABB 50B with instantaneous phase and ground pickup settings of 5A and 2A respectively. Relay 2 is an ABB REF 615 with phase and ground time-overcurrent settings of 1.060 and 0.100 per unit of CT secondary current with time dials of 0.250 and 0.050 respectively. Relay 3 is an ALSTOM P127 with similar time-overcurrent settings for phase and ground of 1.200 and 0.200 per unit of CT secondary current and time dials of 0.300 and 0.025 respectively.

Uploaded by

Vishal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

Ocr: Relay1: Phase INST Ground INST

This document summarizes the overcurrent relay settings for three relays. Relay 1 is an ABB 50B with instantaneous phase and ground pickup settings of 5A and 2A respectively. Relay 2 is an ABB REF 615 with phase and ground time-overcurrent settings of 1.060 and 0.100 per unit of CT secondary current with time dials of 0.250 and 0.050 respectively. Relay 3 is an ALSTOM P127 with similar time-overcurrent settings for phase and ground of 1.200 and 0.200 per unit of CT secondary current and time dials of 0.300 and 0.025 respectively.

Uploaded by

Vishal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project: ETAP Page: 1

Location: 16.0.0C Date: 04-30-2019


Contract: Revision: Base
Engineer:
Filename:
Overcurrent Relay Settings

OCR: Relay1
MFR: ABB Tag #: CT Base kV If (kA)
Model: 50B Phase: 2000/5

GND: 2000/5

OC Level: OC1
Range Setting
Phase INST Pickup 0.8 - 8 Sec - 5A 5.000
Ground INST Pickup 0.2 - 2 Sec - 5A 2.000

OCR: Relay2
MFR: ABB Tag #: CT Base kV If (kA)
Model: REF 615 Phase: 75/1

GND: 75/1

OC Level: OC1
Range Setting
Phase TOC IEC Very Inverse
Pickup (Tap) 0.05 - 5 xCT Sec 1.060
Time Dial 0.250
Ground TOC IEC Very Inverse
Pickup (Tap) 0.01 - 5 xCT Sec 0.100
Time Dial 0.050

OCR: Relay3
MFR: ALSTOM Tag #: CT Base kV If (kA)
Model: P127 Phase: 75/1

GND: 75/1

OC Level: OC1
Range Setting
Phase TOC IEC - Very Inverse
Pickup (Tap) 0.1 - 25 xCT Sec 1.200
Time Dial 0.300
Ground TOC IEC - Very Inverse
Pickup (Tap) 0.002 - 1 xCT Sec 0.200
Time Dial 0.025

You might also like