Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Wall: Wall No.10 (4.2) M - Panel No. 221: 1.1. Reinforcement

    Uploaded by

    Ali Al-Basha
    This document provides details on the reinforcement design of wall panel no. 221, including: - The wall is 4.2m long with 1.2cm diameter main reinforcement bars at the bottom and top covered by 3cm of concrete. - Calculations were performed according to Eurocode standards to verify reinforcement requirements and check cracking, punching, and exposure conditions. - The provided 10.47cm^2/m of reinforcement exceeds the required 2.83cm^2/m. Maximum forces were also reported. - Reinforcement is comprised of 20mm diameter B500B steel bars with a total weight of 454.56kg. Concrete volume is 2.85m^3 and

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Wall: Wall No.10 (4.2) M - Panel No. 221: 1.1. Reinforcement

    Uploaded by

    Ali Al-Basha
    19 views4 pages
    This document provides details on the reinforcement design of wall panel no. 221, including: - The wall is 4.2m long with 1.2cm diameter main reinforcement bars at the bottom and top covered by 3cm of concrete. - Calculations were performed according to Eurocode standards to verify reinforcement requirements and check cracking, punching, and exposure conditions. - The provided 10.47cm^2/m of reinforcement exceeds the required 2.83cm^2/m. Maximum forces were also reported. - Reinforcement is comprised of 20mm diameter B500B steel bars with a total weight of 454.56kg. Concrete volume is 2.85m^3 and

    Original Description:

    WALL

    Original Title

    Wall No.11 (3.3)m

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details on the reinforcement design of wall panel no. 221, including: - The wall is 4.2m long with 1.2cm diameter main reinforcement bars at the bottom and top covered by 3cm of concrete. - Calculations were performed according to Eurocode standards to verify reinforcement requirements and check cracking, punching, and exposure conditions. - The provided 10.47cm^2/m of reinforcement exceeds the required 2.83cm^2/m. Maximum forces were also reported. - Reinforcement is comprised of 20mm diameter B500B steel bars with a total weight of 454.56kg. Concrete volume is 2.85m^3 and

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    19 views4 pages

    Wall: Wall No.10 (4.2) M - Panel No. 221: 1.1. Reinforcement

    Uploaded by

    Ali Al-Basha
    This document provides details on the reinforcement design of wall panel no. 221, including: - The wall is 4.2m long with 1.2cm diameter main reinforcement bars at the bottom and top covered by 3cm of concrete. - Calculations were performed according to Eurocode standards to verify reinforcement requirements and check cracking, punching, and exposure conditions. - The provided 10.47cm^2/m of reinforcement exceeds the required 2.83cm^2/m. Maximum forces were also reported. - Reinforcement is comprised of 20mm diameter B500B steel bars with a total weight of 454.56kg. Concrete volume is 2.85m^3 and

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 4

    1. Wall: Wall No.10 (4.2)m - Panel no.

    221
    1.1. Reinforcement:

     Type : RC wall
     Main reinforcement direction : 0°
    Main reinforcement grade : B500B; Characteristic strength = 500.00 MPa
    Horizontal branch of the stress-strain diagram
     Ductility class :B
     Bar diameters bottom d1 = 1.2 (cm) d2 =
    1.2 (cm)
    top d1 = 1.2 (cm) d2 = 1.2 (cm)
     Cover bottom c1 = 3.0 (cm)
    top c2 = 3.0 (cm)
     Cover deviations Cdev = 1.0(cm), Cdur = 0.0(cm)

    1.2. Concrete

    Class : C30/37; Characteristic strength = 30.00 MPa


    Rectangular stress distribution [3.1.7(3)]
     Density : 2501.36 (kG/m3)
     Concrete creep coefficient: 1.39
     Cement class :N

    1.3. Hypothesis

     Calculations according to
    : EN 1992-1-1:2004/A1:2014
     Method of reinforcement area
    calculations : analytical
     Allowable cracking width
    - upper layer : 0.40 (mm)
    - lower layer : 0.40 (mm)
     Verification of punching : yes
     Exposure
    - upper layer : X0
    - lower layer : X0
     Calculation type :
    compression/tension
     Structure class : S1

    1.4. Wall geometry

    Thickness 0.20 (m)

    Contour:
    edge beginning end length
    x1 y1 x2 y2 (m)
    1 0.00 -4.20 3.39 -4.20 3.39
    2 3.39 -4.20 3.39 0.00 4.20
    3 3.39 0.00 0.00 0.00 3.39
    4 0.00 0.00 0.00 -4.20 4.20

    Support:
    n° Name dimensions coordinates edge
    (m) x y
    0 linear 4.20 / 0.20 1.21 -2.10 —
    0 linear 0.20 / 3.39 1.69 0.00 —
    0 linear 4.20 / 0.15 3.39 -2.10 —
    0 linear 4.20 / 0.15 3.39 -2.10 —
    1174 point 0.50 / 0.25 3.39 0.00 —
    1174 point 0.50 / 0.25 3.39 0.00 —
    * - head present

    1.5. Calculation results:

    1.5.1. Maximum forces + reinforcement

    Ax(+) Ax(-) Ay(+) Ay(-)

    Provided reinforcement (cm2/m):


    0.00 0.00 10.47 10.47
    Modified required reinforcement (cm2/m):
    0.00 0.00 2.83 2.83
    Original required reinforcement (cm2/m):
    0.00 0.00 2.83 2.83
    Coordinates (m):
    -25.56;-4.20 -25.56;-4.20 3.39;-2.10 3.39;-
    2.10

    1.5.2. Maximum forces + reinforcement

    Ax(+) Ax(-) Ay(+) Ay(-)

    Symbol: required area/provided area


    Ax(+) (cm2/m) 0.00/0.00 0.00/0.00 0.00/0.00 0.00/0.00
    Ax(-) (cm2/m) 0.00/0.00 0.00/0.00 0.00/0.00 0.00/0.00
    Ay(+) (cm2/m) 0.00/0.00 0.00/0.00 2.83/10.47
    2.83/10.47
    Ay(-) (cm2/m) 0.00/0.00 0.00/0.00 2.83/10.47
    2.83/10.47

    SLS
    Mxx (kN*m/m) 0.00 0.00 -0.49 -0.49
    Myy (kN*m/m) 0.00 0.00 -0.24 -0.24
    Mxy (kN*m/m) 0.00 0.00 0.13 0.13

    Nxx (kN/m) 0.00 0.00 12.27 12.27


    Nyy (kN/m) 0.00 0.00 -62.20 -62.20
    Nxy (kN/m) 0.00 0.00 -16.78 -16.78

    ULS
    Mxx (kN*m/m) 0.00 0.00 -0.68 -0.68
    Myy (kN*m/m) 0.00 0.00 -0.32 -0.32
    Mxy (kN*m/m) 0.00 0.00 0.18 0.18

    Nxx (kN/m) 0.00 0.00 16.33 16.33


    Nyy (kN/m) 0.00 0.00 -83.59 -83.59
    Nxy (kN/m) 0.00 0.00 -19.99 -19.99

    Coordinates (m) -25.56;-4.20 -25.56;-4.20 3.39;-2.10 3.39;-


    2.10
    Coordinates* (m) 0.00;0.00;0.00 0.00;0.00;0.00 3.33;28.95;2.10
    3.33;28.95;2.10
    * - Coordinates in the structure global coordinate system

    3. Results - detailing
    List of solutions:
    Reinforcement: bars
    Solution no. Reinforcement range Total weight
    Diameter / Weight (kG)
    1 - 468.03

    Results for the solution no. 1


    Reinforcement zones

    Bottom reinforcement
    Name coordinates Provided reinforcement At
    Ar
    x1 y1 x2 y2 f (mm) / (cm) (cm2/m)
    (cm2/m)
    1/1- Ax Main 3.39 -4.20 0.00 -0.00 20.0 / 30.0 0.00 <
    10.47
    1/2- Ay Perpendicular 3.39 -4.20 0.00 -0.00 20.0 / 30.0 2.83 <
    10.47

    Top reinforcement
    Name coordinates Provided reinforcement At
    Ar
    x1 y1 x2 y2 f (mm) / (cm) (cm2/m)
    (cm2/m)
    1/1+ Ax Main 3.39 -4.20 0.00 -0.00 20.0 / 30.0 0.00 <
    10.47
    1/2+ Ay Perpendicular 3.39 -4.20 0.00 -0.00 20.0 / 30.0 2.83 <
    10.47

    4. Material survey
     Concrete volume = 2.85 (m3)
     Formwork = 14.23 (m2)
     Slab circumference = 15.18 (m)
     Area of openings = 0.00 (m2)
     Steel B500B
     Total weight = 454.56 (kG)
     Density = 159.73 (kG/m3)
     Average diameter = 20.0 (mm)
     Survey according to diameters:

    Diameter Length Number of identical elements:


    (m)
    20 3.33 28
    20 4.14 22

    You might also like