Scribd
Upload
222 views6 pages

OSA and Berm Calculator

The document contains parameters for an open pit mine design including a mine height of 78.3m, bench height of 15m, bench face angle of 42 degrees, berm width of 7.5m, and overall slope angle of 33.42 degrees. The total horizontal distance is 118.7m and the distance for a single slope is 16.7m.

Uploaded by

armadi haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
222 views6 pages

OSA and Berm Calculator

The document contains parameters for an open pit mine design including a mine height of 78.3m, bench height of 15m, bench face angle of 42 degrees, berm width of 7.5m, and overall slope angle of 33.42 degrees. The total horizontal distance is 118.7m and the distance for a single slope is 16.7m.

Uploaded by

armadi haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

Abb Items Value unit

T Mine Height 78.3 m


C Bench Height 15.0 m
Beta Bench Face Angle 42 degree
A Berm width 7.5 m
B Ramp width 0.0 m
Berm + Ramp width 87.0
X Total Berm 4.22 unit
Y Total Ramp 0 unit
Total Berm + Ramp 4.22 unit
E Distance Horizontal for single slope 16.7 m
D Distance Horizontal overall 118.7 m

TAN Gamma 0.66

Gamma Overall Slope Angle 33.42 degree

Notes :
Cells with yellow shaded can be filled manually
X

Ramp width = B
X

Berm width = A
y

X E

X
Bench Height = C OSA
BFA

D = Distance horizontal
Mine Height = T
Abb Items Value unit
T Mine Height 78.3 m
C Bench Height 15.0 m
Beta Bench Face Angle 37 degree
Gamma Overall Slope Angle 33.0 degree
B Ramp width 0.0 m
D Distance Horizontal overall 120.6
E Distance Horizontal for single slope 19.9
X Total Berm 4.22 unit
Y Total Ramp 0 unit
Total Berm + Ramp 4.22 unit

A Berm Width 4.0

Notes :
Cells with yellow shaded can be filled manually
X

Ramp width = B
X

Berm width = A
y

X E

X
Bench Height = C OSA
BFA

D = Distance horizontal
Mine Height = T

You might also like