Scribd
Upload
92 views1 page

Api 653 Preparatory Important Open Book Questions: Professional Training and Consultation

This document provides 17 open book questions related to API 653 for professional training and consultation. The questions cover topics such as calculating minimum shell thickness, allowable stresses for tank components, material requirements, requirements for changing a tank's service, welding specifications, and procedures for tank reconstruction, repair, and assessment. Records maintenance and pressure testing procedures are also addressed.

Uploaded by

Shaalan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
92 views1 page

Api 653 Preparatory Important Open Book Questions: Professional Training and Consultation

This document provides 17 open book questions related to API 653 for professional training and consultation. The questions cover topics such as calculating minimum shell thickness, allowable stresses for tank components, material requirements, requirements for changing a tank's service, welding specifications, and procedures for tank reconstruction, repair, and assessment. Records maintenance and pressure testing procedures are also addressed.

Uploaded by

Shaalan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Professional Training and Consultation

API 653 PREPARATORY


IMPORTANT OPEN BOOK QUESTIONS
API 653 Third Edition
No. QUESTION CODE CLAUSE
1 Calculate the t min. welded tank shell API653 4.3.3.1
2 What is the maximum allowable stress for bottom &
API653 4.3.3.1
second course
3. To change the service of the tank to above 200°F
API653 4.2.4.4
what requirements are to be met
4. What is the maximum allowable stress for
API653 4.3.3.1
reconstructed tank
5. What is the maximum allowable stress for revited
API653 4.3.4.1
tank
6. Annular bottom plate thickness (Sp. Gr. < 1.0) API653 Table 4-4
7. Assessment of the safe use of a tank constructed of
API653 Fig. 5.2
unknown materials
8. What records shall be maintained by the Owner /
API653 6.8.1
Operator
9. What are the material specifications for structural
API653 7.3.2
materials
10. Shell design for a reconstructed tank, with materials
whose allowable stresses are not given in Table 3-2 API653 8.4.2
of API 650, what allowable stresses are to be taken
11. After the valve has been installed on the flange at
API653 9.14.5.3
what pressure the pressure test shall be performed
12. In tank re-construction, new vertical joints in
adjacent shell courses shall be offset by what API653 10.4.2.1
minimum distance
13. During tank reconstruction / repair what is the
API653 10.4.2.5
maximum allowed undercutting for vertical joints
14. What is the maximum reinforcement allowed for
API653 Table 10-1
horizontal joint of ¾” plate
15. In completed horizontal butt joints, the upper plate
shall not project beyond the lower plate by how API653 10.4.4.2
much
16. Calculation of Internal Bottom settlement or bulges API653 B.3.3
17. Problem on edge settlement API653 Fig B-10
18. For welding A516 Gr 70 materials what electrode
API650 2.8
classification shall be used

P.O. Box No. 7274, Dammam 31462, Saudi Arabia ● TEL (966) 3 857 0006 ● FAX (966) 3
857 5255 ● [email protected] ● www.gotoITC.com

You might also like