Three-Way Switches Dimensional Data 115 - 230 KV, Type 3G and 3GL
Three-Way Switches Dimensional Data 115 - 230 KV, Type 3G and 3GL
Dimensional Data 115 - 230 kV, Type 3G and 3GL Three-Way Switches
Type: 3G (airbreak) and 3GL (loadbreak)
Plan View - Single Phase Elevation View - Installed Switch Orientation: Phase-Over-Phase
L Voltage: 15 - 230 KV
Current: 600, 1200, 2000 and 3000 Ampere
Description
Side-break style switch in a phase-over-phase configuration,
with horizontal upright mounting on an aluminum support
structure. Three individual switch pole units are arranged in
an integral design, sharing insulators, interrupters, and other
switch components. Provides switching for alternate sources.
90° G
C Application
A B Three-way switches are frequently used for line taps, ties, and
sectionalizing. Phase-over-phase arrangements are espe-
cially helpful where restricted right-of-way or difficult terrain
make other switch/structure configurations unworkable.
F
• Provides design flexibility to system designers
Ordering Information
J Standard Equipment To Be Specified on Order
E Type “3G” and “3GL” GOABS® come complete with copper To obtain pricing information or to place an order, the following
and copper alloy live parts, welded aluminum frame minimum information must be specified:
structures, and a manual control mechanism consisting of • Catalog Number
vertical control rods, horizontal control rods, outboard
bearings, intermediate control rod guides, operating handle,
• Voltage Rating (kV) and BIL Rating (kV)
lock-plate assembly, and ground strap. • Continuous Current Rating (amps)
• Momentary Current Rating (RMS amps)
3'-6" Type “3G” switches are furnished with high-speed, snap-out • If insulators are required, specify TR Number; if insulators
arcing horns for interruption of limited amounts of line charg- are non-standard, specify required parameters, i.e.
ing and transformer magnetizing currents. “3G” switches can
polymer, extra leakage distance, high strength, resistive
If the addition of a loadbreak device is not anticipated, dimension “G” may be converted to arcless switching by the addition of SEECO
Dimensions in Inches (Unless Otherwise Specified) be reduced; consult the factory for special phase spacing requirements MONORUPTR® vacuum interrupters. glazing, etc.
• Type of pole structure (wood, concrete, steel, laminated
kV A B C D E F G J K L Type “3GL” switches are furnished with MONORUPTR® wood, etc.)
vacuum interrupters for arcless switching of load, loop, line • Required dimensions: bottom phase to grade, phase to
115 73 51-1/2 168-3/16 142-7/16 147-1/4 51-3/4 18'-0" 30'-0" 16'-0" 128-1/2" charging, and transformer magnetizing currents. Please re-
phase, and phase to static
fer to the catalog section for MONORUPTR® vacuum inter-
138 80-3/4 63-1/2 180-7/16 156-1/16 170-3/4 60-3/4 22'-0" 30'-0" 16'-0" 128-1/2" rupters for ratings, application, and features and benefits. • Type of operating mechanism: manual or motor operator
• Optional equipment
161 88-1/2 75-1/2 198-7/16 169-7/16 179-3/4 68-3/4 24'-0" 30'-0" 16'-0" 128-1/2"
Optional Equipment
230 106 95-1/8 229 196 206 85-7/8 28'-0" 40'-0" 16'-0" 128-1/2" Accessories, such as motor operators, operator platforms, An Order Specification checklist is available to assist you in
terminal connectors, porcelain insulating sections, etc. are organizing and completing the information required. You may
also available. obtain a copy of the checklist by contacting SEECO, your local
sales representative, or on-line at www.seecoswitch.com
4 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 1
• Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected] • Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected]
Document PC-002-3 Document PC-002-3
January 2, 2009 January 2, 2009
Serving the Electrical Utility Serving the Electrical Utility
Industry Since 1920 Industry Since 1920
2 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 3
• Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected] • Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected]
Document PC-002-3 Document PC-002-3
January 2, 2009 January 2, 2009
Serving the Electrical Utility Serving the Electrical Utility
Industry Since 1920 Industry Since 1920
2 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 3
• Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected] • Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected]
Document PC-002-3 Document PC-002-3
January 2, 2009 January 2, 2009
Serving the Electrical Utility Serving the Electrical Utility
Industry Since 1920 Industry Since 1920
Dimensional Data 115 - 230 kV, Type 3G and 3GL Three-Way Switches
Type: 3G (airbreak) and 3GL (loadbreak)
Plan View - Single Phase Elevation View - Installed Switch Orientation: Phase-Over-Phase
L Voltage: 15 - 230 KV
Current: 600, 1200, 2000 and 3000 Ampere
Description
Side-break style switch in a phase-over-phase configuration,
with horizontal upright mounting on an aluminum support
structure. Three individual switch pole units are arranged in
an integral design, sharing insulators, interrupters, and other
switch components. Provides switching for alternate sources.
90° G
C Application
A B Three-way switches are frequently used for line taps, ties, and
sectionalizing. Phase-over-phase arrangements are espe-
cially helpful where restricted right-of-way or difficult terrain
make other switch/structure configurations unworkable.
F
• Provides design flexibility to system designers
Ordering Information
J Standard Equipment To Be Specified on Order
E Type “3G” and “3GL” GOABS® come complete with copper To obtain pricing information or to place an order, the following
and copper alloy live parts, welded aluminum frame minimum information must be specified:
structures, and a manual control mechanism consisting of • Catalog Number
vertical control rods, horizontal control rods, outboard
bearings, intermediate control rod guides, operating handle,
• Voltage Rating (kV) and BIL Rating (kV)
lock-plate assembly, and ground strap. • Continuous Current Rating (amps)
• Momentary Current Rating (RMS amps)
3'-6" Type “3G” switches are furnished with high-speed, snap-out • If insulators are required, specify TR Number; if insulators
arcing horns for interruption of limited amounts of line charg- are non-standard, specify required parameters, i.e.
ing and transformer magnetizing currents. “3G” switches can
polymer, extra leakage distance, high strength, resistive
If the addition of a loadbreak device is not anticipated, dimension “G” may be converted to arcless switching by the addition of SEECO
Dimensions in Inches (Unless Otherwise Specified) be reduced; consult the factory for special phase spacing requirements MONORUPTR® vacuum interrupters. glazing, etc.
• Type of pole structure (wood, concrete, steel, laminated
kV A B C D E F G J K L Type “3GL” switches are furnished with MONORUPTR® wood, etc.)
vacuum interrupters for arcless switching of load, loop, line • Required dimensions: bottom phase to grade, phase to
115 73 51-1/2 168-3/16 142-7/16 147-1/4 51-3/4 18'-0" 30'-0" 16'-0" 128-1/2" charging, and transformer magnetizing currents. Please re-
phase, and phase to static
fer to the catalog section for MONORUPTR® vacuum inter-
138 80-3/4 63-1/2 180-7/16 156-1/16 170-3/4 60-3/4 22'-0" 30'-0" 16'-0" 128-1/2" rupters for ratings, application, and features and benefits. • Type of operating mechanism: manual or motor operator
• Optional equipment
161 88-1/2 75-1/2 198-7/16 169-7/16 179-3/4 68-3/4 24'-0" 30'-0" 16'-0" 128-1/2"
Optional Equipment
230 106 95-1/8 229 196 206 85-7/8 28'-0" 40'-0" 16'-0" 128-1/2" Accessories, such as motor operators, operator platforms, An Order Specification checklist is available to assist you in
terminal connectors, porcelain insulating sections, etc. are organizing and completing the information required. You may
also available. obtain a copy of the checklist by contacting SEECO, your local
sales representative, or on-line at www.seecoswitch.com
4 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 Southern Electrical Equipment Company, Inc. • P.O. Box 668547 • Charlotte, N.C. 28266 1
• Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected] • Phone (704) 392-1396 • Fax (704) 392-7033 • E-Mail [email protected]