0% found this document useful (0 votes)

143 views2,036 pages

2ndCopy.E DSR 17 18

The document contains survey data for road works conducted by MORTH (Ministry of Road Transport and Highways) in India. It includes 77 entries for road survey and design preparation (DPR) works and 27 entries for road subgrade works, with details like item code, quantity of work, and rates.

Uploaded by

Veerachari Hadikere

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLSX, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

143 views2,036 pages

2ndCopy.E DSR 17 18

Uploaded by

Veerachari Hadikere

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLSX, PDF, TXT or read online on Scribd

You are on page 1/ 2036

1

1 Road Survey and DPR 1.01 1 0.01 0.01 0.01 1.010

1 Road Survey and DPR 1.02 1 0.01 0.02 0.02 1.020

1 Road Survey and DPR 1.03 1 0.01 0.03 0.03 1.030

1 Road Survey and DPR 1.04 MORTH 1.04 1 0.01 0.04 0.04 1.040

1 Road Survey and DPR 1.05 MORTH 1.05 1 0.01 0.05 0.05 1.050

1 Road Survey and DPR 1.06 MORTH 1.06 1 0.01 0.06 0.06 1.060

1 Road Survey and DPR 1.07 MORTH 1.07 1 0.01 0.07 0.07 1.070

1 Road Survey and DPR 1.08 MORTH 1.08 1 0.01 0.08 0.08 1.080

1 Road Survey and DPR 1.09 MORTH 1.09 1 0.01 0.09 0.09 1.090

1 Road Survey and DPR 1.10 MORTH 1.1 1 0.01 0.1 0.1 1.100

1 Road Survey and DPR 1.11 MORTH 1.11 1 0.01 0.11 0.11 1.110

1 Road Survey and DPR 1.12 MORTH 1.12 1 0.01 0.12 0.12 1.120

1 Road Survey and DPR 1.13 MORTH 1.13 1 0.01 0.13 0.13 1.130

1 Road Survey and DPR 1.14 MORTH 1.14 1 0.01 0.14 0.14 1.140

1 Road Survey and DPR 1.15 MORTH 1.15 1 0.01 0.15 0.15 1.150

1 Road Survey and DPR 1.16 MORTH 1.16 1 0.01 0.16 0.16 1.160

1 Road Survey and DPR 1.17 MORTH 1.17 1 0.01 0.17 0.17 1.170

1 Road Survey and DPR 1.18 MORTH 1.18 1 0.01 0.18 0.18 1.180

1 Road Survey and DPR 1.19 MORTH 1.19 1 0.01 0.19 0.19 1.190

1 Road Survey and DPR 1.20 MORTH 1.2 1 0.01 0.2 0.2 1.200

1 Road Survey and DPR 1.21 MORTH 1.21 1 0.01 0.21 0.21 1.210

1 Road Survey and DPR 1.22 MORTH 1.22 1 0.01 0.22 0.22 1.220

1 Road Survey and DPR 1.23 MORTH 1.23 1 0.01 0.23 0.23 1.230

1 Road Survey and DPR 1.24 MORTH 1.24 1 0.01 0.24 0.24 1.240

1 Road Survey and DPR 1.25 MORTH 1.25 1 0.01 0.25 0.25 1.250

1 Road Survey and DPR 1.26 MORTH 1.26 1 0.01 0.26 0.26 1.260

1 Road Survey and DPR 1.27 MORTH 1.27 1 0.01 0.27 0.27 1.270

1 Road Survey and DPR 1.28 MORTH 1.28 1 0.01 0.28 0.28 1.280

1 Road Survey and DPR 1.29 MORTH 1.29 1 0.01 0.29 0.29 1.290

1 Road Survey and DPR 1.30 MORTH 1.3 1 0.01 0.3 0.3 1.300

1 Road Survey and DPR 1.31 MORTH 1.31 1 0.01 0.31 0.31 1.310

1 Road Survey and DPR 1.32 MORTH 1.32 1 0.01 0.32 0.32 1.320

1 Road Survey and DPR 1.33 MORTH 1.33 1 0.01 0.33 0.33 1.330

1 Road Survey and DPR 1.34 MORTH 1.34 1 0.01 0.34 0.34 1.340

1 Road Survey and DPR 1.35 MORTH 1.35 1 0.01 0.35 0.35 1.350

1 Road Survey and DPR 1.36 MORTH 1.36 1 0.01 0.36 0.36 1.360

1 Road Survey and DPR 1.37 MORTH 1.37 1 0.01 0.37 0.37 1.370

1 Road Survey and DPR 1.38 MORTH 1.38 1 0.01 0.38 0.38 1.380

1 Road Survey and DPR 1.39 MORTH 1 0.01 0.39 0.39 0.000

1 Road Survey and DPR 1.04 MORTH 1 0.01 0.4 0.4 0.000

1 Road Survey and DPR 1.41 MORTH 1 0.01 0.41 0.41 0.000

1 Road Survey and DPR 1.42 MORTH 1 0.01 0.42 0.42 0.000

1 Road Survey and DPR 1.43 MORTH 1 0.01 0.43 0.43 0.000

1 Road Survey and DPR 1.44 MORTH 1 0.01 0.44 0.44 0.000

1 Road Survey and DPR 1.45 MORTH 1 0.01 0.45 0.45 0.000

1 Road Survey and DPR 1.46 MORTH 1 0.01 0.46 0.46 0.000

1 Road Survey and DPR 1.47 MORTH 1 0.01 0.47 0.47 0.000

1 Road Survey and DPR 1.48 MORTH 1 0.01 0.48 0.48 0.000

1 Road Survey and DPR 1.49 MORTH 1 0.01 0.49 0.49 0.000

1 Road Survey and DPR 1.50 MORTH 1 0.01 0.5 0.5 0.000

1 Road Survey and DPR 1.51 MORTH 1 0.01 0.51 0.51 0.000

1 Road Survey and DPR 1.52 MORTH 1 0.01 0.52 0.52 0.000

1 Road Survey and DPR 1.53 MORTH 1 0.01 0.53 0.53 0.000

1 Road Survey and DPR 1.54 MORTH 1 0.01 0.54 0.54 0.000

1 Road Survey and DPR 1.55 MORTH 1 0.01 0.55 0.55 0.000

1 Road Survey and DPR 1.56 MORTH 1 0.01 0.56 0.56 0.000

1 Road Survey and DPR 1.57 MORTH 1 0.01 0.57 0.57 0.000

1 Road Survey and DPR 1.58 MORTH 1 0.01 0.58 0.58 0.000

1 Road Survey and DPR 1.59 MORTH 1 0.01 0.59 0.59 0.000

1 Road Survey and DPR 1.60 MORTH 1 0.01 0.6 0.6 0.000

1 Road Survey and DPR 1.61 MORTH 1 0.01 0.61 0.61 0.000

1 Road Survey and DPR 1.62 MORTH 1 0.01 0.62 0.62 0.000

1 Road Survey and DPR 1.63 MORTH 1 0.01 0.63 0.63 0.000

1 Road Survey and DPR 1.64 MORTH 1 0.01 0.64 0.64 0.000

1 Road Survey and DPR 1.65 MORTH 1 0.01 0.65 0.65 0.000

1 Road Survey and DPR 1.66 MORTH 1 0.01 0.66 0.66 0.000

1 Road Survey and DPR 1.67 MORTH 1 0.01 0.67 0.67 0.000

1 Road Survey and DPR 1.68 MORTH 1 0.01 0.68 0.68 0.000

1 Road Survey and DPR 1.69 MORTH 1 0.01 0.69 0.69 0.000

1 Road Survey and DPR 1.70 MORTH 1 0.01 0.7 0.7 0.000

1 Road Survey and DPR 1.71 MORTH 1 0.01 0.71 0.71 0.000

1 Road Survey and DPR 1.72 MORTH 1 0.01 0.72 0.72 0.000

1 Road Survey and DPR 1.73 MORTH 1 0.01 0.73 0.73 0.000

1 Road Survey and DPR 1.74 MORTH 1 0.01 0.74 0.74 0.000

1 Road Survey and DPR 1.75 MORTH 1 0.01 0.75 0.75 0.000

1 Road Survey and DPR 1.76 MORTH 1 0.01 0.76 0.76 0.000

1 Road Survey and DPR 1.77 MORTH 1 0.01 0.77 0.77 0.000

1 Road Sub grade 2.01 MORTH 201 2 0.01 0.01 0.01 0.000

1 Road Sub grade 2.02 MORTH 201 2 0.01 0.02 0.02 0.000

1 Road Sub grade 2.03 MORTH 201 2 0.01 0.03 0.03 0.000

1 Road Sub grade 2.04 MORTH 201 2 0.01 0.04 0.04 0.000

1 Road Sub grade 2.05 MORTH 201 2 0.01 0.05 0.05 0.000

1 Road Sub grade 2.06 MORTH 201 2 0.01 0.06 0.06 0.000

1 Road Sub grade 2.07 MORTH 201 2 0.01 0.07 0.07 0.000

1 Road Sub grade 2.08 MORTH 201 2 0.01 0.08 0.08 0.000

1 Road Sub grade 2.09 MORTH 201 2 0.01 0.09 0.09 0.000

1 Road Sub grade 2.10 MORTH 301 2 0.01 0.1 0.1 0.000

1 Road Sub grade 2.11 MORTH 301 2 0.01 0.11 0.11 0.000

1 Road Sub grade 2.12 MORTH 301 2 0.01 0.12 0.12 0.000

1 Road Sub grade 2.13 MORTH 301 2 0.01 0.13 0.13 0.000

1 Road Sub grade 2.14 MORTH 301 2 0.01 0.14 0.14 0.000

1 Road Sub grade 2.15 MORTH 301 2 0.01 0.15 0.15 0.000

1 Road Sub grade 2.16 MORTH 301 2 0.01 0.16 0.16 0.000

1 Road Sub grade 2.17 MORTH 309 2 0.01 0.17 0.17 0.000

1 Road Sub grade 2.18 MORTH 309 2 0.01 0.18 0.18 0.000

1 Road Sub grade 2.19 MORTH 309 2 0.01 0.19 0.19 0.000

1 Road Sub grade 2.20 MORTH 309 2 0.01 0.2 0.2 0.000

1 Road Sub grade 2.21 MORTH 309 2 0.01 0.21 0.21 0.000

1 Road Sub grade 2.22 MORTH 309 2 0.01 0.22 0.22 0.000

1 Road Sub grade 2.23 MORTH 305 2 0.01 0.23 0.23 0.000

1 Road Sub grade 2.24 MORTH 305 2 0.01 0.24 0.24 0.000

1 Road Sub grade 2.25 MORTH 305 2 0.01 0.25 0.25 0.000

1 Road Sub grade 2.26 MORTH 305 2 0.01 0.26 0.26 0.000

1 oad Sub grade 2.27 MORTH 305 2 0.01 0.27 0.27 0.000

1 Road Sub grade 2.28 MORTH 305 2 0.01 0.28 0.28 0.000

1 Road Sub grade 2.29 MORTH 408 2 0.01 0.29 0.29 0.000

1 Road Sub grade 2.30 MORTH 408 2 0.01 0.3 0.3 0.000

1 Road Sub grade 2.31 MORTH 408 2 0.01 0.31 0.31 0.000

1 Road Sub grade 2.32 MORTH 404 2 0.01 0.32 0.32 0.000

1 Road Sub grade 2.33 MORTH 501 2 0.01 0.33 0.33 0.000

1 Road Sub grade 2.34 MORTH 2504 2 0.01 0.34 0.34 0.000

1 oad Sub grade 2.35 MORTH 402 2 0.01 0.35 0.35 0.000

1 Road Sub grade 2.36 MORTH 402 2 0.01 0.36 0.36 0.000

1 Road Sub grade 2.37 MORTH 402 2 0.01 0.37 0.37 0.000

1 Road Sub grade 2.38 MORTH 402 2 0.01 0.38 0.38 0.000

1 Road Sub grade 2.39 MORTH 403 2 0.01 0.39 0.39 0.000

1 Road Sub Base and Base Course 3 0.01 0.01 0.01 0.000

1 Road Sub Base and Base Course 3 0.01 0.02 0.02 0.000

1 Road Sub Base and Base Course 3 0.01 0.03 0.03 0.000

1 Road Sub Base and Base Course 3 0.01 0.04 0.04 0.000

1 Road Sub Base and Base Course 3 0.01 0.05 0.05 0.000

1 Road Sub Base and Base Course 3 0.01 0.06 0.06 0.000

1 Road Sub Base and Base Course 3 0.01 0.07 0.07 0.000

1 Road Sub Base and Base Course 3 0.01 0.08 0.08 0.000

1 Road Sub Base and Base Course 3 0.01 0.09 0.09 0.000

1 Road Sub Base and Base Course 3 0.01 0.1 0.1 0.000

1 Road Sub Base and Base Course 3 0.01 0.11 0.11 0.000

1 Road Sub Base and Base Course 3 0.01 0.12 0.12 0.000

1 Road Sub Base and Base Course 3 0.01 0.13 0.13 0.000

1 Road Sub Base and Base Course 3 0.01 0.14 0.14 0.000

1 Road Sub Base and Base Course 3 0.01 0.15 0.15 0.000

1 Road Sub Base and Base Course 3 0.01 0.16 0.16 0.000

1 Road Sub Base and Base Course 3 0.01 0.17 0.17 0.000

1 Road Sub Base and Base Course 3 0.01 0.18 0.18 0.000

1 Road Sub Base and Base Course 3 0.01 0.19 0.19 0.000

1 Road Sub Base and Base Course 3 0.01 0.2 0.2 0.000

1 Road Sub Base and Base Course 3 0.01 0.21 0.21 0.000

1 Road Sub Base and Base Course 3 0.01 0.22 0.22 0.000

1 Road Sub Base and Base Course 3 0.01 0.23 0.23 0.000

1 Road Sub Base and Base Course 3 0.01 0.24 0.24 0.000

1 Road Sub Base and Base Course 3 0.01 0.25 0.25 0.000

1 Road Sub Base and Base Course 3 0.01 0.26 0.26 0.000

1 Road Sub Base and Base Course 3 0.01 0.27 0.27 0.000

1 Road Sub Base and Base Course 3 0.01 0.28 0.28 0.000

1 Road Sub Base and Base Course 3 0.01 0.29 0.29 0.000

1 Road Sub Base and Base Course 3 0.01 0.3 0.3 0.000

1 Road Sub Base and Base Course 3 0.01 0.31 0.31 0.000

1 Road Sub Base and Base Course 3 0.01 0.32 0.32 0.000

1 Road Sub Base and Base Course 3 0.01 0.33 0.33 0.000

1 Road Sub Base and Base Course 3 0.01 0.34 0.34 0.000

1 Road Sub Base and Base Course 3 0.01 0.35 0.35 0.000

1 Road Sub Base and Base Course 3 0.01 0.36 0.36 0.000

1 Road Sub Base and Base Course 3 0.01 0.37 0.37 0.000

1 Road Sub Base and Base Course 3 0.01 0.38 0.38 0.000

1 Road Sub Base and Base Course 3 0.01 0.39 0.39 0.000

1 Road Sub Base and Base Course 3 0.01 0.4 0.4 0.000

1 Road Sub Base and Base Course 3 0.01 0.41 0.41 0.000

1 Road Sub Base and Base Course 3 0.01 0.42 0.42 0.000

1 Road Sub Base and Base Course 3 0.01 0.43 0.43 0.000

1 Road Sub Base and Base Course 3 0.01 0.44 0.44 0.000

1 Road Sub Base and Base Course 3 0.01 0.45 0.45 0.000

1 Road Sub Base and Base Course 3 0.01 0.46 0.46 0.000
1 Road Sub Base and Base Course 3 0.01 0.47 0.47 0.000

1 Road Sub Base and Base Course 3 0.01 0.48 0.48 0.000

1 Road Sub Base and Base Course 3 0.01 0.49 0.49 0.000

1 Road Sub Base and Base Course 3 0.01 0.5 0.5 0.000

1 Road Sub Base and Base Course 3 0.01 0.51 0.51 0.000

1 Road Surfacing Course 4 0.01 0.01 0.01 0.000

1 Road Surfacing Course 4 0.01 0.02 0.02 0.000

1 Road Surfacing Course 4 0.01 0.03 0.03 0.000

1 Road Surfacing Course 4 0.01 0.04 0.04 0.000

1 Road Surfacing Course 4 0.01 0.05 0.05 0.000

1 Road Surfacing Course 4 0.01 0.06 0.06 0.000

1 Road Surfacing Course 4 0.01 0.07 0.07 0.000

1 Road Surfacing Course 4 0.01 0.08 0.08 0.000

1 Road Surfacing Course 4 0.01 0.09 0.09 0.000

1 Road Surfacing Course 4 0.01 0.1 0.1 0.000
1 Rigid Pavement 5.01 MORTH 602 5 0.01 0.01 0.01 0.000
1 Rigid Pavement 5.02 MORTH 602 5 0.01 0.02 0.02 0.000
1 Rigid Pavement 5.03 MORTH 602 5 0.01 0.03 0.03 0.000
1 Rigid Pavement 5.04 MORTH 602 5 0.01 0.04 0.04 0.000
1 Rigid Pavement 5.05 MORTH 602 5 0.01 0.05 0.05 0.000
1 Rigid Pavement 5.06 MORTH 602 5 0.01 0.06 0.06 0.000
1 Rigid Pavement 5.07 MORTH 602 5 0.01 0.07 0.07 0.000
1 Rigid Pavement 5.08 MORTH 602 5 0.01 0.08 0.08 0.000
1 Rigid Pavement 5.09 MORTH 602 5 0.01 0.09 0.09 0.000
1 Rigid Pavement 5.10 MORTH 602 5 0.01 0.1 0.1 0.000
1 Rigid Pavement 5.11 MORTH 602 5 0.01 0.11 0.11 0.000
1 Rigid Pavement 5.12 MORTH 602 5 0.01 0.12 0.12 0.000
1 Rigid Pavement 5.13 MORTH 601 5 0.01 0.13 0.13 0.000

1 Rigid Pavement 5.14 MORTH 602.2.8 5 0.01 0.14 0.14 0.000

1 Rigid Pavement 5.15 MORTH 602.2.8 5 0.01 0.15 0.15 0.000

1 Rigid Pavement 5.16 MORTH 602.2.8 5 0.01 0.16 0.16 0.000

1 Rigid Pavement 5.17 MORTH 602.6 5 0.01 0.17 0.17 0.000

1 Rigid Pavement 5.18 MORTH 602.10.3 5 0.01 0.18 0.18 0.000

1 Rigid Pavement 5.19 MORTH 605 5 0.01 0.19 0.19 0.000

1 Rigid Pavement 5.20 MORTH 410.3.6 5 0.01 0.2 0.2 0.000

1 Rigid Pavement 5.21 MORTH 410.3.6 5 0.01 0.21 0.21 0.000

1 Rigid Pavement 5.22 MORTH 5 0.01 0.22 0.22 0.000

1 Road Miscellaneous items 7 0.01 0.01 0.01 0.000

1 Road Miscellaneous items 7 0.01 0.02 0.02 0.000

1 Road Miscellaneous items 7 0.01 0.03 0.03 0.000

1 Road Miscellaneous items 7 0.01 0.04 0.04 0.000

1 Road Miscellaneous items 7 0.01 0.05 0.05 0.000

1 Road Miscellaneous items 7 0.01 0.06 0.06 0.000

1 Road Miscellaneous items 7 0.01 0.07 0.07 0.000

1 Road Miscellaneous items 7 0.01 0.08 0.08 0.000

1 Road Miscellaneous items 7 0.01 0.09 0.09 0.000

1 Road Miscellaneous items 7 0.01 0.1 0.1 0.000

1 Road Miscellaneous items 7 0.01 0.11 0.11 0.000

1 Road Miscellaneous items 7 0.01 0.12 0.12 0.000

1 Road Miscellaneous items 7 0.01 0.13 0.13 0.000

1 Road Miscellaneous items 7 0.01 0.14 0.14 0.000

1 Road Miscellaneous items 7 0.01 0.15 0.15 0.000

1 Road Miscellaneous items 7 0.01 0.16 0.16 0.000

1 Road Miscellaneous items 7 0.01 0.17 0.17 0.000

1 Road Miscellaneous items 7 0.01 0.18 0.18 0.000

1 Road Miscellaneous items 7 0.01 0.19 0.19 0.000

1 Road Miscellaneous items 7 0.01 0.2 0.2 0.000

1 Road Miscellaneous items 7 0.01 0.21 0.21 0.000

1 Road Miscellaneous items 7 0.01 0.22 0.22 0.000

1 Road Miscellaneous items 7 0.01 0.23 0.23 0.000

1 Road Miscellaneous items 7 0.01 0.24 0.24 0.000

1 Road Miscellaneous items 7 0.01 0.25 0.25 0.000

1 Road Miscellaneous items 7 0.01 0.26 0.26 0.000

1 Road Miscellaneous items 7 0.01 0.27 0.27 0.000

1 Road Miscellaneous items 7 0.01 0.28 0.28 0.000

1 Road Miscellaneous items 7 0.01 0.29 0.29 0.000

1 Road Miscellaneous items 7 0.01 0.3 0.3 0.000

1 Road Miscellaneous items 7 0.01 0.31 0.31 0.000

1 Road Miscellaneous items 7 0.01 0.32 0.32 0.000

1 Road Miscellaneous items 7 0.01 0.33 0.33 0.000

1 Road Miscellaneous items 7 0.01 0.34 0.34 0.000

1 Road Miscellaneous items 7 0.01 0.35 0.35 0.000

1 Road Miscellaneous items 7 0.01 0.36 0.36 0.000

1 Road Maintenance 8.01 MORTH 3004 8 0.01 0.01 0.01 0.000

1 Road Maintenance 8.02 MORTH 3004 8 0.01 0.02 0.02 0.000

1 Road Maintenance 8.03 MORTH 3002 8 0.01 0.03 0.03 0.000

1 Road Maintenance 8.04 MORTH 3003 8 0.01 0.04 0.04 0.000

1 Road Maintenance 8.05 MORTH 3003 8 0.01 0.05 0.05 0.000

1 Road Maintenance 8.06 MORTH 3004 8 0.01 0.06 0.06 0.000

1 Road Maintenance 8.07 MORTH 3004 8 0.01 0.07 0.07 0.000

1 Road Maintenance 8.08 MORTH 3004 8 0.01 0.08 0.08 0.000

1 Road Maintenance 8.09 MORTH 3004 8 0.01 0.09 0.09 0.000

1 Road Maintenance 8.10 RD 8 0.01 0.1 0.1 0.000

1 Road Maintenance 8.11 RD 8 0.01 0.11 0.11 0.000

1 Road Maintenance 8.12 RD 8 0.01 0.12 0.12 0.000

1 Road Maintenance 8.13 RD 8 0.01 0.13 0.13 0.000

1 Road Maintenance 8.14 RD 8 0.01 0.14 0.14 0.000

1 Road Maintenance 8.15 RD 8 0.01 0.15 0.15 0.000

1 Road Maintenance 8.16 RD 8 0.01 0.16 0.16 0.000

1 Road Maintenance 8.17 RD 8 0.01 0.17 0.17 0.000

1 Road Maintenance 8.18 RD 8 0.01 0.18 0.18 0.000

1 Road Maintenance 8.19 RD 8 0.01 0.19 0.19 0.000

1 Road Maintenance 8.20 RD 8 0.01 0.2 0.2 0.000

1 Road Maintenance 8.21 RD 8 0.01 0.21 0.21 0.000

1 Road Maintenance 8.22 RD 8 0.01 0.22 0.22 0.000

1 Road Maintenance 8.23 RD 8 0.01 0.23 0.23 0.000

1 Road Maintenance 8.24 MORTH 8 0.01 0.24 0.24 0.000

1 Road Maintenance 8.25 MORTH 514 8 0.01 0.25 0.25 0.000

1 Road Maintenance 8.26 MORTH 514 8 0.01 0.26 0.26 0.000

1 Road Maintenance 8.27 MORTH 408 8 0.01 0.27 0.27 0.000

1 Cross Drainage Works 11 0.01 0.01 0.01 0.000

1 Cross Drainage Works 11 0.01 0.02 0.02 0.000

1 Cross Drainage Works 11 0.01 0.03 0.03 0.000

1 Cross Drainage Works 11 0.01 0.04 0.04 0.000

1 Cross Drainage Works 11 0.01 0.05 0.05 0.000

1 Cross Drainage Works 11 0.01 0.06 0.06 0.000

1 Cross Drainage Works 11 0.01 0.07 0.07 0.000

1 Cross Drainage Works 11 0.01 0.08 0.08 0.000

1 Cross Drainage Works 11 0.01 0.09 0.09 0.000

1 Cross Drainage Works 11 0.01 0.1 0.1 0.000

1 Cross Drainage Works 11 0.01 0.11 0.11 0.000

1 Cross Drainage Works 11 0.01 0.12 0.12 0.000

1 Cross Drainage Works 11 0.01 0.13 0.13 0.000

1 Cross Drainage Works 11 0.01 0.14 0.14 0.000

1 Cross Drainage Works 11 0.01 0.15 0.15 0.000

1 Cross Drainage Works 11 0.01 0.16 0.16 0.000

1 Cross Drainage Works 11 0.01 0.17 0.17 0.000

1 Cross Drainage Works 11 0.01 0.18 0.18 0.000

1 Cross Drainage Works 11 0.01 0.19 0.19 0.000

1 Cross Drainage Works 11 0.01 0.2 0.2 0.000

1 Cross Drainage Works 11 0.01 0.21 0.21 0.000

1 Cross Drainage Works 11 0.01 0.22 0.22 0.000

1 Cross Drainage Works 11 0.01 0.23 0.23 0.000

1 Cross Drainage Works 11 0.01 0.24 0.24 0.000

1 Cross Drainage Works 11 0.01 0.25 0.25 0.000

1 Cross Drainage Works 11 0.01 0.26 0.26 0.000

1 Cross Drainage Works 11 0.01 0.27 0.27 0.000

1 Cross Drainage Works 11 0.01 0.28 0.28 0.000

1 Cross Drainage Works 11 0.01 0.29 0.29 0.000

1 Cross Drainage Works 11 0.01 0.3 0.3 0.000

1 Cross Drainage Works 11 0.01 0.31 0.31 0.000

1 Bridge sub structure and Foundation 12 0.01 0.01 0.01 0.000

1 Bridge sub structure and Foundation 12 0.01 0.02 0.02 0.000

1 Bridge sub structure and Foundation 12 0.01 0.03 0.03 0.000

1 Bridge sub structure and Foundation 12 0.01 0.04 0.04 0.000

1 Bridge sub structure and Foundation 12 0.01 0.05 0.05 0.000

1 Bridge sub structure and Foundation 12 0.01 0.06 0.06 0.000

1 Bridge sub structure and Foundation 12 0.01 0.07 0.07 0.000

1 Bridge sub structure and Foundation 12 0.01 0.08 0.08 0.000

1 Bridge sub structure and Foundation 12 0.01 0.09 0.09 0.000

1 Bridge sub structure and Foundation 12 0.01 0.1 0.1 0.000

1 Bridge sub structure and Foundation 12 0.01 0.11 0.11 0.000

1 Bridge sub structure and Foundation 12 0.01 0.12 0.12 0.000

1 Bridge sub structure and Foundation 12 0.01 0.13 0.13 0.000

1 Bridge sub structure and Foundation 12 0.01 0.14 0.14 0.000

1 Bridge sub structure and Foundation 12 0.01 0.15 0.15 0.000

1 Bridge sub structure and Foundation 12 0.01 0.16 0.16 0.000

1 Bridge sub structure and Foundation 12 0.01 0.17 0.17 0.000

1 Bridge sub structure and Foundation 12 0.01 0.18 0.18 0.000

1 Bridge sub structure and Foundation 12 0.01 0.19 0.19 0.000

1 Bridge sub structure and Foundation 12 0.01 0.2 0.2 0.000

1 Bridge sub structure and Foundation 12 0.01 0.21 0.21 0.000

1 Bridge sub structure and Foundation 12 0.01 0.22 0.22 0.000

1 Bridge sub structure and Foundation 12 0.01 0.23 0.23 0.000

1 Bridge sub structure and Foundation 12 0.01 0.24 0.24 0.000

1 Bridge sub structure and Foundation 12 0.01 0.25 0.25 0.000

1 Bridge sub structure and Foundation 12 0.01 0.26 0.26 0.000

1 Bridge sub structure and Foundation 12 0.01 0.27 0.27 0.000

1 Bridge sub structure and Foundation 12 0.01 0.28 0.28 0.000

1 Bridge sub structure and Foundation 12 0.01 0.29 0.29 0.000

1 Bridge sub structure and Foundation 12 0.01 0.3 0.3 0.000

1 Bridge sub structure and Foundation 12 0.01 0.31 0.31 0.000

1 Bridge sub structure and Foundation 12 0.01 0.32 0.32 0.000

1 Bridge sub structure and Foundation 12 0.01 0.33 0.33 0.000

1 Bridge sub structure and Foundation 12 0.01 0.34 0.34 0.000

1 Bridge sub structure and Foundation 12 0.01 0.35 0.35 0.000

1 Bridge sub structure and Foundation 12 0.01 0.36 0.36 0.000

1 Bridge sub structure and Foundation 12 0.01 0.37 0.37 0.000

1 Bridge sub structure and Foundation 12 0.01 0.38 0.38 0.000

1 Bridge sub structure and Foundation 12 0.01 0.39 0.39 0.000

1 Bridge sub structure and Foundation 12 0.01 0.4 0.4 0.000

1 Bridge sub structure and Foundation 12 0.01 0.41 0.41 0.000

1 Bridge sub structure and Foundation 12 0.01 0.42 0.42 0.000

1 Bridge sub structure and Foundation 12 0.01 0.43 0.43 0.000

1 Bridge sub structure and Foundation 12 0.01 0.44 0.44 0.000

1 Bridge sub structure and Foundation 12 0.01 0.45 0.45 0.000

1 Bridge sub structure and Foundation 12 0.01 0.46 0.46 0.000

1 Bridge sub structure and Foundation 12 0.01 0.47 0.47 0.000

1 Bridge sub structure and Foundation 12 0.01 0.48 0.48 0.000

1 Bridge sub structure and Foundation 12 0.01 0.49 0.49 0.000

1 Bridge sub structure and Foundation 12 0.01 0.5 0.5 0.000

1 Bridge sub structure and Foundation 12 0.01 0.51 0.51 0.000

1 Bridge sub structure and Foundation 12 0.01 0.52 0.52 0.000

1 Bridge sub structure and Foundation 12 0.01 0.53 0.53 0.000

1 Bridge sub structure and Foundation 12 0.01 0.54 0.54 0.000

1 Bridge sub structure and Foundation 12 0.01 0.55 0.55 0.000

1 Bridge sub structure and Foundation 12 0.01 0.56 0.56 0.000

1 Bridge sub structure and Foundation 12 0.01 0.57 0.57 0.000

1 Bridge sub structure and Foundation 12 0.01 0.58 0.58 0.000

1 Bridge sub structure and Foundation 12 0.01 0.59 0.59 0.000

1 Bridge sub structure and Foundation 12 0.01 0.6 0.6 0.000

1 Bridge sub structure and Foundation 12 0.01 0.61 0.61 0.000

1 Bridge sub structure and Foundation 12 0.01 0.62 0.62 0.000

1 Bridge sub structure and Foundation 12 0.01 0.63 0.63 0.000

1 Bridge sub structure and Foundation 12 0.01 0.64 0.64 0.000

1 Bridge sub structure and Foundation 12 0.01 0.65 0.65 0.000

1 Bridge sub structure and Foundation 12 0.01 0.66 0.66 0.000

1 Bridge sub structure and Foundation 12 0.01 0.67 0.67 0.000

1 Bridge sub structure and Foundation 12 0.01 0.68 0.68 0.000

1 Bridge Bearings 13.01 BR 34A 13 0.01 0.01 0.01 0.000

1 Bridge Bearings 13.02 BR 13 0.01 0.02 0.02 0.000

1 Bridge Bearings 13.03 BR 62 13 0.01 0.03 0.03 0.000

1 Bridge Super Structure 14.01 BR 35A 14 0.01 0.01 0.01 0.000

1 Bridge Super Structure 14.02 BR 35B a 14 0.01 0.02 0.02 0.000

1 Bridge Super Structure 14.03 BR 35B b 14 0.01 0.03 0.03 0.000

1 Bridge Super Structure 14.04 BR 36A 14 0.01 0.04 0.04 0.000

1 Bridge Super Structure 14.05 BR 36B 14 0.01 0.05 0.05 0.000

1 Bridge Super Structure 14.06 BR 14 0.01 0.06 0.06 0.000

1 Bridge Super Structure 14.07 BR 38A 14 0.01 0.07 0.07 0.000

1 Bridge Super Structure 14.08 BR 38A 14 0.01 0.08 0.08 0.000

1 Bridge Super Structure 14.09 BR 38A 14 0.01 0.09 0.09 0.000

1 Bridge Super Structure 14.10 BR 38A 14 0.01 0.1 0.1 0.000

1 Bridge Super Structure 14.11 BR 38A 14 0.01 0.11 0.11 0.000

1 Bridge Super Structure 14.12 BR 38A 14 0.01 0.12 0.12 0.000

1 Bridge Super Structure 14.13 BR 14 0.01 0.13 0.13 0.000

1 Bridge Super Structure 14.14 BR 14 0.01 0.14 0.14 0.000

1 Bridge Super Structure 14.15 BR 14 0.01 0.15 0.15 0.000

1 Bridge Super Structure 14.16 BR 14 0.01 0.16 0.16 0.000

1 Bridge Super Structure 14.17 BR 14 0.01 0.17 0.17 0.000

1 Bridge Super Structure 14.18 BR 14 0.01 0.18 0.18 0.000

1 Bridge Super Structure 14.19 BR 38A 14 0.01 0.19 0.19 0.000

1 Bridge Super Structure 14.20 BR 38A 14 0.01 0.2 0.2 0.000

1 Bridge Super Structure 14.21 BR 38A 14 0.01 0.21 0.21 0.000

1 Bridge Super Structure 14.22 BR 38A 14 0.01 0.22 0.22 0.000

1 Bridge Super Structure 14.23 BR 38A 14 0.01 0.23 0.23 0.000

1 Bridge Super Structure 14.24 BR 38A 14 0.01 0.24 0.24 0.000

1 Bridge Super Structure 14.25 BR 14 0.01 0.25 0.25 0.000

1 Bridge Super Structure 14.26 BR 14 0.01 0.26 0.26 0.000

1 Bridge Super Structure 14.27 BR 14 0.01 0.27 0.27 0.000

1 Bridge Super Structure 14.28 BR 14 0.01 0.28 0.28 0.000

1 Bridge Super Structure 14.29 BR 14 0.01 0.29 0.29 0.000

1 Bridge Super Structure 14.30 BR 14 0.01 0.3 0.3 0.000

1 Bridge Super Structure 14.31 MORTH C1 14 0.01 0.31 0.31 0.000

2604

1 Bridge Super Structure 14.32 BR 43A 14 0.01 0.32 0.32 0.000

1 Bridge Super Structure 14.33 BR 43B 14 0.01 0.33 0.33 0.000

1 Bridge Super Structure 14.34 BR 45 14 0.01 0.34 0.34 0.000

1 Bridge Super Structure 14.35 BR 45 14 0.01 0.35 0.35 0.000

1 Bridge Super Structure 14.36 BR 46 14 0.01 0.36 0.36 0.000

1 Bridge Super Structure 14.37 BR 47 14 0.01 0.37 0.37 0.000

1 Bridge Super Structure 14.38 BR 47 14 0.01 0.38 0.38 0.000

1 Bridge Super Structure 14.39 BR 14 0.01 0.39 0.39 0.000

1 Bridge Super Structure 14.40 BR 14 0.01 0.4 0.4 0.000

1 Bridge Super Structure 14.41 BR 48 14 0.01 0.41 0.41 0.000

1 Bridge Super Structure 14.42 BR 50 14 0.01 0.42 0.42 0.000

1 Bridge Super Structure 14.43 BR 50 14 0.01 0.43 0.43 0.000

1 Bridge Super Structure 14.44 BR 14 0.01 0.44 0.44 0.000

1 Bridge Super Structure 14.45 BR 14 0.01 0.45 0.45 0.000

1 Bridge Super Structure 14.46 BR 51 14 0.01 0.46 0.46 0.000

1 Bridge Super Structure 14.47 BR 14 0.01 0.47 0.47 0.000

1 Bridge Super Structure 14.48 BR 51B 14 0.01 0.48 0.48 0.000

1 Bridge Super Structure 14.49 BR 51C 14 0.01 0.49 0.49 0.000

1 Bridge Super Structure 14.50 BR 55 14 0.01 0.5 0.5 0.000

1 Bridge Super Structure 14.51 BR 59 a 14 0.01 0.51 0.51 0.000

1 Bridge Super Structure 14.52 BR 59 a 14 0.01 0.52 0.52 0.000

1 Bridge Super Structure 14.53 BR 14 0.01 0.53 0.53 0.000

1 Bridge Super Structure 14.54 BR 14 0.01 0.54 0.54 0.000

1 Bridge : Bored Pile 15.01 MORTH 15 0.01 0.01 0.01 0.000

1 Bridge : Bored Pile 15.02 BR 15 0.01 0.02 0.02 0.000

1 Bridge : Bored Pile 15.03 MORTH 15 0.01 0.03 0.03 0.000

1 Bridge : Bored Pile 15.04 BR 15 0.01 0.04 0.04 0.000

1 Bridge : Bored Pile 15.05 MORTH 15 0.01 0.05 0.05 0.000

1 Bridge : Bored Pile 15.06 BR 15 0.01 0.06 0.06 0.000

1 Bridge : Bored Pile 15.07 MORTH 15 0.01 0.07 0.07 0.000

1 Bridge : Bored Pile 15.08 BR 15 0.01 0.08 0.08 0.000

1 Bridge : Bored Pile 15.09 MORTH 15 0.01 0.09 0.09 0.000

1 Bridge : Bored Pile 15.10 BR 15 0.01 0.1 0.1 0.000

1 Bridge : Bored Pile 15.11 MORTH 15 0.01 0.11 0.11 0.000

1 Bridge : Bored Pile 15.12 BR 15 0.01 0.12 0.12 0.000

1 Bridge : Bored Pile 15.13 MORTH 15 0.01 0.13 0.13 0.000

1 Bridge : Bored Pile 15.14 BR 15 0.01 0.14 0.14 0.000

1 Bridge : Bored Pile 15.15 MORTH 15 0.01 0.15 0.15 0.000

1 Bridge : Bored Pile 15.16 BR 15 0.01 0.16 0.16 0.000

1 Bridge : Bored Pile 15.17 MORTH 15 0.01 0.17 0.17 0.000

1 Bridge : Bored Pile 15.18 BR 15 0.01 0.18 0.18 0.000

1 Bridge : Bored Pile 15.19 MORTH 15 0.01 0.19 0.19 0.000

1 Bridge : Bored Pile 15.20 BR 15 0.01 0.2 0.2 0.000

1 Bridge : Bored Pile 15.21 MORTH 15 0.01 0.21 0.21 0.000

1 Bridge : Bored Pile 15.22 BR 15 0.01 0.22 0.22 0.000

1 Bridge : Bored Pile 15.23 MORTH 15 0.01 0.23 0.23 0.000

1 Bridge : Bored Pile 15.24 BR 15 0.01 0.24 0.24 0.000

1 Bridge : Bored Pile 15.25 MORTH 15 0.01 0.25 0.25 0.000

1 Bridge : Bored Pile 15.26 BR 15 0.01 0.26 0.26 0.000

1 Bridge : Bored Pile 15.27 MORTH 15 0.01 0.27 0.27 0.000

1 Bridge : Bored Pile 15.28 BR 15 0.01 0.28 0.28 0.000

1 Bridge : Bored Pile 15.29 MORTH 15 0.01 0.29 0.29 0.000

1 Bridge : Bored Pile 15.30 BR 15 0.01 0.3 0.3 0.000

1 Bridge : Bored Pile 15.31 MORTH 15 0.01 0.31 0.31 0.000

1 Bridge : Bored Pile 15.32 BR 15 0.01 0.32 0.32 0.000

1 Bridge : Bored Pile 15.33 MORTH 15 0.01 0.33 0.33 0.000

1 Bridge : Bored Pile 15.34 BR 15 0.01 0.34 0.34 0.000

1 Bridge : Bored Pile 15.35 MORTH 15 0.01 0.35 0.35 0.000

1 Bridge : Bored Pile 15.36 BR 15 0.01 0.36 0.36 0.000

1 Bridge : Bored Pile 15.37 MORTH 15 0.01 0.37 0.37 0.000

1 Bridge : Bored Pile 15.38 BR 15 0.01 0.38 0.38 0.000

1 Bridge : Bored Pile 15.39 MORTH 15 0.01 0.39 0.39 0.000

1 Bridge : Bored Pile 15.40 BR 15 0.01 0.4 0.4 0.000

1 Bridge : Bored Pile 15.41 MORTH 15 0.01 0.41 0.41 0.000

1 Bridge : Bored Pile 15.42 BR 15 0.01 0.42 0.42 0.000

1 Bridge : Bored Pile 15.43 MORTH 15 0.01 0.43 0.43 0.000

1 Bridge : Bored Pile 15.44 BR 15 0.01 0.44 0.44 0.000

1 Bridge : Bored Pile 15.45 MORTH 15 0.01 0.45 0.45 0.000

1 Bridge : Bored Pile 15.46 BR 15 0.01 0.46 0.46 0.000

1 Bridge : Bored Pile 15.47 MORTH 15 0.01 0.47 0.47 0.000

1 Bridge : Bored Pile 15.48 BR 15 0.01 0.48 0.48 0.000

1 Bridge : Bored Pile 15.49 MORTH 15 0.01 0.49 0.49 0.000

1 Bridge : Bored Pile 15.50 BR 15 0.01 0.5 0.5 0.000

1 Bridge : Bored Pile 15.51 MORTH 15 0.01 0.51 0.51 0.000

1 Bridge : Bored Pile 15.52 BR 15 0.01 0.52 0.52 0.000

1 Bridge : Bored Pile 15.53 MORTH 15 0.01 0.53 0.53 0.000

1 Bridge : Bored Pile 15.54 BR 15 0.01 0.54 0.54 0.000

1 Bridge : Bored Pile 15.55 MORTH 15 0.01 0.55 0.55 0.000

1 Bridge : Bored Pile 15.56 BR 15 0.01 0.56 0.56 0.000

1 Bridge : Bored Pile 15.57 MORTH 15 0.01 0.57 0.57 0.000

1 Bridge : Bored Pile 15.58 BR 15 0.01 0.58 0.58 0.000

1 Bridge : Bored Pile 15.59 MORTH 15 0.01 0.59 0.59 0.000

1 Bridge : Bored Pile 15.60 BR 15 0.01 0.6 0.6 0.000

1 Bridge : Bored Pile 15.61 MORTH 15 0.01 0.61 0.61 0.000

1 Bridge : Bored Pile 15.62 BR 15 0.01 0.62 0.62 0.000

1 Bridge : Bored Pile 15.63 MORTH 15 0.01 0.63 0.63 0.000

1 Bridge : Bored Pile 15.64 BR 15 0.01 0.64 0.64 0.000

1 Bridge : Bored Pile 15.65 MORTH 15 0.01 0.65 0.65 0.000

1 Bridge : Bored Pile 15.66 BR 15 0.01 0.66 0.66 0.000

1 Bridge : Bored Pile 15.67 MORTH 15 0.01 0.67 0.67 0.000

1 Bridge : Bored Pile 15.68 BR 15 0.01 0.68 0.68 0.000

1 Bridge : Bored Pile 15.69 MORTH 15 0.01 0.69 0.69 0.000

1 Bridge : Bored Pile 15.70 BR 15 0.01 0.7 0.7 0.000

1 Bridge : Bored Pile 15.71 MORTH 15 0.01 0.71 0.71 0.000

1 Bridge : Bored Pile 15.72 BR 15 0.01 0.72 0.72 0.000

1 Bridge : Bored Pile 15.73 MORTH 15 0.01 0.73 0.73 0.000

1 Bridge : Bored Pile 15.74 BR 15 0.01 0.74 0.74 0.000

1 Bridge : Bored Pile 15.75 MORTH 15 0.01 0.75 0.75 0.000

1 Bridge : Bored Pile 15.76 BR 15 0.01 0.76 0.76 0.000

1 Bridge : Bored Pile 15.77 MORTH 15 0.01 0.77 0.77 0.000

1 Bridge : Bored Pile 15.78 BR 15 0.01 0.78 0.78 0.000

1 Bridge : Bored Pile 15.79 MORTH 15 0.01 0.79 0.79 0.000

1 Bridge : Bored Pile 15.80 BR 15 0.01 0.8 0.8 0.000

1 Bridge : Bored Pile 15.81 MORTH 15 0.01 0.81 0.81 0.000

1 Bridge : Bored Pile 15.82 BR 15 0.01 0.82 0.82 0.000

1 Bridge : Bored Pile 15.83 MORTH 15 0.01 0.83 0.83 0.000

1 Bridge : Bored Pile 15.84 BR 15 0.01 0.84 0.84 0.000

1 Bridge : Bored Pile 15.85 MORTH 15 0.01 0.85 0.85 0.000

1 Bridge : Bored Pile 15.86 BR 15 0.01 0.86 0.86 0.000

1 Bridge : Bored Pile 15.87 MORTH 15 0.01 0.87 0.87 0.000

1 Bridge : Bored Pile 15.88 BR 15 0.01 0.88 0.88 0.000

1 Bridge : Bored Pile 15.89 MORTH 15 0.01 0.89 0.89 0.000

1 Bridge : Bored Pile 15.09 BR 15 0.01 0.9 0.9 0.000

1 Bridge : Bored Pile 15.91 MORTH 15 0.01 0.91 0.91 0.000

1 Bridge : Bored Pile 15.92 BR 15 0.01 0.92 0.92 0.000

1 Bridge : Bored Pile 15.93 MORTH 15 0.01 0.93 0.93 0.000

1 Bridge : Bored Pile 15.94 BR 15 0.01 0.94 0.94 0.000

1 Bridge : Bored Pile 15.95 MORTH 15 0.01 0.95 0.95 0.000

1 Bridge : Bored Pile 15.96 BR 15 0.01 0.96 0.96 0.000

1 Bridge : Bored Pile 15.97 MORTH 15 0.01 0.97 0.97 0.000

1 Bridge : Bored Pile 15.98 BR 15 0.01 0.98 0.98 0.000

1 Bridge : Bored Pile 15.99 MORTH 15 0.01 0.99 0.99 0

1 Bridge : Bored Pile 15.100 BR 15 0.01 1 1 0.000

1 Bridge : Bored Pile 15.101 MORTH 15 0.01 1.01 1.01 0.000

1 Bridge : Bored Pile 15.102 BR 15 0.01 1.02 1.02 0.000

1 Bridge : Bored Pile 15.103 MORTH 15 0.01 1.03 1.03 0.000

1 Bridge : Bored Pile 15.104 BR 15 0.01 1.04 1.04 0.000

1 Bridge : Bored Pile 15.105 MORTH 15 0.01 1.05 1.05 0.000

1 Bridge : Bored Pile 15.106 BR 15 0.01 1.06 1.06 0.000

1 Bridge : Bored Pile 15.107 MORTH 15 0.01 1.07 1.07 0.000

1 Bridge : Bored Pile 15.108 BR 15 0.01 1.08 1.08 0.000

1 Bridge : Bored Pile 15.109 MORTH 15 0.01 1.09 1.09 0.000

1 Bridge : Bored Pile 15.110 BR 15 0.01 1.1 1.1 0.000

1 Bridge : Bored Pile 15.111 BR 15 0.01 1.11 1.11 0.000

1 Bridge : Bored Pile 15.112 BR 15 0.01 1.12 1.12 0.000

1 Bridge : Bored Pile 15.113 BR 15 0.01 1.13 1.13 0.000

1 Bridge : Bored Pile 15.114 BR 15 0.01 1.14 1.14 0.000

1 Bridge : Bored Pile 15.115 BR 0.01 0 0.01 0.000

1 Bridge : Bored Pile 15.116 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.117 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.118 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.119 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.120 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.121 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.122 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.123 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.124 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.125 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.126 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.127 BR 0.01 0 0 0.000

1 Bridge : Bored Pile 15.128 BR 0.01 0 0 0.000

1 Bridge maintenance 16.01 BR 0.01 0 0 0.000

1 Bridge maintenance 16.02 BR 0.01 0 0 0.000

1 Bridge maintenance 16.03 BR 0.01 0 0 0.000

1 Bridge maintenance 16.04 BR 0.01 0 0 0.000

1 Bridge maintenance 16.05 BR 0.01 0 0 0.000

1 Bridge maintenance 16.06 BR 0.01 0 0 0.000

1 Bridge maintenance 16.07 BR 0.01 0 0 0.000

1 Bridge maintenance 16.08 BR 0.01 0 0 0.000

1 Bridge maintenance 16.09 BR 0.01 0 0 0.000

1 Bridge maintenance 16.10 Road Main. 0.01 0 0 0.000

1 Bridge maintenance 16.11 Road Main. 0.01 0 0 0.000

1 Excavation 21.01 BDA 1 0.01 0 0 0.000

1 Excavation 21.02 BDA 1 0.01 0 0 0.000

1 Excavation 21.03 BDA 1 0.01 0 0 0.000

1 Excavation 21.04 BDA 1 0.01 0 0 0.000

1 Excavation 21.05 BDA 2 0.01 0 0 0.000

1 Excavation 21.06 BDA 2 0.01 0 0 0.000

1 Excavation 21.07 BDA 2 0.01 0 0 0.000

1 Excavation 21.08 BDA 2 0.01 0 0 0.000

1 Excavation 21.09 BDA 3 0.01 0 0 0.000

1 Excavation 21.10 BDA 3 0.01 0 0 0.000

1 Excavation 21.11 BDA 3 0.01 0 0 0.000

1 Excavation 21.12 BDA 3 0.01 0 0 0.000

1 Excavation 21.13 BDA 4 0.01 0 0 0.000

1 Excavation 21.14 BDA 4 0.01 0 0 0.000

1 Excavation 21.15 BDA 4 0.01 0 0 0.000

1 Excavation 21.16 BDA 4 0.01 0 0 0.000

1 Excavation 21.17 BDA 5 0.01 0 0 0.000

1 Excavation 21.18 BDA 5 0.01 0 0 0.000

1 Excavation 21.19 BDA 5 B1 0.01 0 0 0.000

1 Excavation 21.20 BDA 6 0.01 0 0 0.000

1 Excavation 21.21 BDA 7 0.01 0 0 0.000

1 Excavation 21.22 BDW 0.01 0 0 0.000

1 Excavation 21.23 BDW 0.01 0 0 0.000

1 Excavation 21.24 BDW 0.01 0 0 0.000

1 Excavation 21.25 BDW 0.01 0 0 0.000

1 Excavation 21.26 BDW 0.01 0 0 0.000

1 Excavation 21.27 BDW 0.01 0 0 0.000

1 Excavation 21.28 BDW 0.01 0 0 0.000

1 Excavation 21.29 BDW 0.01 0 0 0.000

1 Excavation 21.30 BDW 0.01 0 0 0.000

1 Excavation 21.31 BDW 0.01 0 0 0.000

1 Excavation 21.32 BDW 0.01 0 0 0.000

1 Excavation 21.33 BDW 0.01 0 0 0.000

1 Excavation 21.34 BDW 0.01 0 0 0.000

1 Excavation 21.35 0 0.01 0 0 0.000

1 Excavation 21.36 BDA 10 0.01 0 0 0.000

1 Excavation 21.37 BDA 11 0.01 0 0 0.000

1 Excavation 21.38 BDA 12 0.01 0 0 0.000

1 Excavation 21.39 BDA 13 0.01 0 0 0.000

1 Excavation 21.40 BDA 0.01 0 0 0.000

1 Pile Foundation: Building 0.01 0 0 0.000

1 Structural Steel Work 23.01 BDC 2 0.01 0 0 0.000

1 Structural Steel Work 23.02 BDC 3 0.01 0 0 0.000

1 Structural Steel Work 23.03 BDC 6 0.01 0 0 0.000

1 Structural Steel Work 23.04 BDC 8 0.01 0 0 0.000

1 Structural Steel Work 23.05 BDC 0.01 0 0 0.000

1 Structural Steel Work 23.06 BDC 0.01 0 0 0.000

1 Structural Steel Work 23.07 BDC 0.01 0 0 0.000

1 Structural Steel Work 23.08 BDC 0.01 0 0 0.000

1 Structural Steel Work 23.09 BDW 6A 0.01 0 0 0.000

1 Structural Steel Work 23.10 BDW 6 0.01 0 0 0.000

1 Structural Steel Work 23.11 0.01 0 0 0.000

1 Structural Steel Work 23.12 0.01 0 0 0.000

1 Plain Cement Concrete 24.01 BDE 1 0.01 0 0 0.000

1 Plain Cement Concrete 24.02 BDE 1 0.01 0 0 0.000

1 Plain Cement Concrete 24.03 0 0.01 0 0 0.000

1 Plain Cement Concrete 24.04 BDE 2 0.01 0 0 0.000

1 Plain Cement Concrete 24.05 BDE 2 0.01 0 0 0.000

1 Plain Cement Concrete 24.06 BDE 2 0.01 0 0 0.000

1 Plain Cement Concrete 24.07 BDE 2 0.01 0 0 0.000

1 Plain Cement Concrete 24.08 BDE 4 0.01 0 0 0.000

1 Plain Cement Concrete 24.09 BDE 4 0.01 0 0 0.000

1 Plain Cement Concrete 24.10 BDE 4 0.01 0 0 0.000

1 Plain Cement Concrete 24.11 BDE 4 0.01 0 0 0.000

1 Plain Cement Concrete 24.12 BDE 7 0.01 0 0 0.000

1 Plain Cement Concrete 24.13 BDE 7 0.01 0 0 0.000

1 Plain Cement Concrete 24.14 BDE 5 0.01 0 0 0.000

1 Plain Cement Concrete 24.15 BDE 5 0.01 0 0 0.000

1 Plain Cement Concrete 24.16 BDE 3 0.01 0 0 0.000

1 Plain Cement Concrete 24.17 BDE 7 0.01 0 0 0.000

1 Plain Cement Concrete 24.18 BDE 8 0.01 0 0 0.000

1 Plain Cement Concrete 24.19 BDF 27 0.01 0 0 0.000

1 Reinforced Cement Concrete 0.01 0 0 0.000

1 Cubic Metre 8920 1505 0.01 0 0 0.000

1 Reinforced Cement Concrete 0.01 0 0 0.000

1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000
1 Reinforced Cement Concrete 0.01 0 0 0.000

1 Reinforced Cement Concrete 0.01 0 0 0.000

1 Brick Masonry 27.01 BDG 1 0.01 0 0 0.000

1 Brick Masonry 27.02 BDG 2 0.01 0 0 0.000

1 Brick Masonry 27.03 BDG 3 0.01 0 0 0.000

1 Brick Masonry 27.04 BDG 4 0.01 0 0 0.000

1 Brick Masonry 27.05 BDG 5 0.01 0 0 0.000

1 Brick Masonry 27.06 BDG 7 0.01 0 0 0.000

1 Brick Masonry 27.07 BDG 8 0.01 0 0 0.000

1 Brick Masonry 27.08 BDG 9 0.01 0 0 0.000

1 Brick Masonry 27.09 BDG 9 0.01 0 0 0.000

1 Brick Masonry 27.01 BDG 10 0.01 0 0 0.000

1 Brick Masonry 27.11 BDG 10 0.01 0 0 0.000

1 Brick Masonry 27.12 BDG 0.01 0 0 0.000

1 Brick Masonry 27.13 BDG 0.01 0 0 0.000

1 Brick Masonry 27.14 BDG 0.01 0 0 0.000

1 Brick Masonry 27.15 BDG 0.01 0 0 0.000

1 Brick Masonry 27.16 BDG 0.01 0 0 0.000

1 Stone Masonry 28.01 BDH 1 0.01 0 0 0.000

1 Stone Masonry 28.02 BDH 2 0.01 0 0 0.000

1 Stone Masonry 28.03 BDH 3 0.01 0 0 0.000

1 Stone Masonry 28.04 BDH 4 0.01 0 0 0.000

1 Stone Masonry 28.05 BDH 5 0.01 0 0 0.000

1 Stone Masonry 28.06 BDH 6 0.01 0 0 0.000

1 Stone Masonry 28.07 BDH 7 0.01 0 0 0.000

1 Stone Masonry 28.08 BDH 8 0.01 0 0 0.000

1 Stone Masonry 28.09 BDH 11 0.01 0 0 0.000

1 Stone Masonry 28.01 BDH 12 0.01 0 0 0.000

1 Stone Masonry 28.11 BDH 13 0.01 0 0 0.000

1 Stone Masonry 28.12 BDH 14 0.01 0 0 0.000

1 Stone Masonry 28.13 BDH 40 0.01 0 0 0.000

1 Stone Masonry 28.14 BDH 15 0.01 0 0 0.000

1 Concrete Block Masonry 0.01 0 0 0.000

1 Expansion Joint 30.01 BDK 1 0.01 0 0 0.000

1 Expansion Joint 30.02 BDK 1 0.01 0 0 0.000

1 Expansion Joint 30.03 BDK 1 0.01 0 0 0.000

1 Expansion Joint 30.04 BDK 1 0.01 0 0 0.000

1 Expansion Joint 30.05 BDK 1A 0.01 0 0 0.000

1 Expansion Joint 30.06 BDK 1B 0.01 0 0 0.000

1 Expansion Joint 30.07 BDK 1C 0.01 0 0 0.000

1 Expansion Joint 30.08 BDK 1D 0.01 0 0 0.000

1 Expansion Joint 30.09 BDK 0.01 0 0 0.000

1 Expansion Joint 30.01 BDK 0.01 0 0 0.000

1 Expansion Joint 30.11 0.01 0 0 0.000

1 Water Proofing 31.01 BDJ 2 0.01 0 0 0.000

1 Water Proofing 31.02 BDJ 3 0.01 0 0 0.000

1 Water Proofing 31.03 BDJ 0.01 0 0 0.000

1 Water Proofing 31.04 BDJ 0.01 0 0 0.000

1 Water Proofing 31.05 BDJ 0.01 0 0 0.000

1 Water Proofing 31.06 BDJ 0.01 0 0 0.000

1 Water Proofing 31.07 BDJ 0.01 0 0 0.000

1 Water Proofing 31.08 BDJ 0.01 0 0 0.000

1 Water Proofing 31.09 BDJ 0.01 0 0 0.000

1 Water Proofing 31.01 BDJ 0.01 0 0 0.000

1 Water Proofing 31.11 BDJ 0.01 0 0 0.000

1 Water Proofing 31.12 BDJ 0.01 0 0 0.000

1 Water Proofing 31.13 BDJ 0.01 0 0 0.000

1 Water Proofing 31.14 BDJ 0.01 0 0 0.000

1 Water Proofing 31.15 BDJ 0.01 0 0 0.000

1 Water Proofing 31.16 BDJ 0.01 0 0 0.000

1 Water Proofing 31.17 0.01 0 0 0.000

1 Water Proofing 31.18 0.01 0 0 0.000
1 Water Proofing 31.19 0.01 0 0 0.000
1 Water Proofing 31.20 0.01 0 0 0.000

1 Water Proofing 31.21 0.01 0 0 0.000

1 Water Proofing 31.22 0.01 0 0 0.000
1 Water Proofing 31.23 0.01 0 0 0.000
1 Water Proofing 31.24 0.01 0 0 0.000
1 Water Proofing 31.25 0.01 0 0 0.000

1 Plastering and Pointing 32.01 BDL 1 0.01 0 0 0.000

1 Plastering and Pointing 32.02 BDL 1 0.01 0 0 0.000

1 Plastering and Pointing 32.03 BDL 2 0.01 0 0 0.000

1 Plastering and Pointing 32.04 BDL 2A 0.01 0 0 0.000

1 Plastering and Pointing 32.05 BDL 2B 0.01 0 0 0.000

1 Plastering and Pointing 32.06 BDL 4 0.01 0 0 0.000

1 Plastering and Pointing 32.07 BDL 4A 0.01 0 0 0.000

1 Plastering and Pointing 32.08 BDL 4B 0.01 0 0 0.000

1 Plastering and Pointing 32.09 BDL 5 0.01 0 0 0.000

1 Plastering and Pointing 32.01 BDL 3 0.01 0 0 0.000

1 Plastering and Pointing 32.11 BDL 7 0.01 0 0 0.000

1 Plastering and Pointing 32.12 BDL 8 0.01 0 0 0.000

1 Plastering and Pointing 32.13 BDL 9 0.01 0 0 0.000

1 Plastering and Pointing 32.14 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.15 BDL 10 0.01 0 0 0.000

1 Plastering and Pointing 32.16 BDL 15A 0.01 0 0 0.000

1 Plastering and Pointing 32.17 BDL 15B 0.01 0 0 0.000

1 Plastering and Pointing 32.18 BDL 16 0.01 0 0 0.000

1 Plastering and Pointing 32.19 BDL 17 0.01 0 0 0.000

1 Plastering and Pointing 32.20 BDL 18 0.01 0 0 0.000

1 Plastering and Pointing 32.21 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.22 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.23 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.24 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.25 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.26 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.27 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.28 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.29 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.30 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.31 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.32 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.33 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.34 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.35 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.36 BDL 0.01 0 0 0.000

1 Plastering and Pointing 32.37 BDL 0.01 0 0 0.000

1 Paving Flooring and dado 0.01 0 0 0.000

1 Wood Finish 34.01 BDN 1.1 0.01 0 0 0.000

1 Wood Finish 34.02 BDN 1.1 0.01 0 0 0.000

1 Wood Finish 34.03 BDN 1.2 0.01 0 0 0.000

1 Wood Finish 34.04 BDN 1.2 0.01 0 0 0.000

1 Wood Finish 34.05 BDN 1.3 0.01 0 0 0.000

1 Wood Finish 34.06 BDN 1.3 0.01 0 0 0.000

1 Wood Finish 34.07 BDN 1.4 0.01 0 0 0.000

1 Wood Finish 34.08 BDN 1.4 0.01 0 0 0.000

1 Wood Finish 34.09 BDN 0.01 0 0 0.000

1 Wood Finish 34.01 BDN 0.01 0 0 0.000

1 Wood Finish 34.11 BDN 0.01 0 0 0.000

1 Oil Painting 35.01 BDO 1 0.01 0 0 0.000

1 Oil Painting 35.02 BDO 2 0.01 0 0 0.000

1 Oil Painting 35.03 BDO 2A 0.01 0 0 0.000

1 Oil Painting 35.04 BDO 3 0.01 0 0 0.000

1 Oil Painting 35.05 BDO 4 0.01 0 0 0.000

1 Oil Painting 35.06 BDO 4A 0.01 0 0 0.000

1 Oil Painting 35.07 BDO 5 0.01 0 0 0.000

1 Oil Painting 35.08 BDO 6 0.01 0 0 0.000

1 Oil Painting 35.09 BDO 6A 0.01 0 0 0.000

1 Oil Painting 35.01 BDO 7 0.01 0 0 0.000

1 Oil Painting 35.11 0 0.01 0 0 0.000

1 Oil Painting 35.12 BDO 7A 0.01 0 0 0.000

1 Oil Painting 35.13 BDO 8 0.01 0 0 0.000

1 Oil Painting 35.14 0 0.01 0 0 0.000

1 Oil Painting 35.15 0 0.01 0 0 0.000

1 Oil Painting 35.16 0 0.01 0 0 0.000

1 Oil Painting 35.17 0.01 0 0 0.000

1 Oil Painting 35.18 BDO 8B 0.01 0 0 0.000

1 Oil Painting 35.19 BDO 8C 0.01 0 0 0.000

1 Oil Painting 35.20 BDO 8D 0.01 0 0 0.000

1 Oil Painting 35.21 BDO 8E 0.01 0 0 0.000

1 Oil Painting 35.22 BDO 8F 0.01 0 0 0.000

1 Oil Painting 35.23 BDO 0.01 0 0 0.000

1 Oil Painting 35.24 BDO 0.01 0 0 0.000

1 Oil Painting 35.25 BDO 0.01 0 0 0.000

1 Oil Painting 35.26 BDO 0.01 0 0 0.000

1 Oil Painting 35.27 BDO 0.01 0 0 0.000

1 Oil Painting 35.28 BDO 0.01 0 0 0.000

1 Colouring 36.01 1 BDP 7D 0.01 0 0 0.000

1 Colouring 36.02 BDP 1 0.01 0 0 0.000

1 Colouring 36.03 BDP 1A 0.01 0 0 0.000

1 Colouring 36.04 BDP 2 0.01 0 0 0.000

1 Colouring 36.05 BDP 2A 0.01 0 0 0.000

1 Colouring 36.06 BDP 3 0.01 0 0 0.000

1 Colouring 36.07 BDP 3A 0.01 0 0 0.000

1 Colouring 36.08 BDP 4 0.01 0 0 0.000

1 Colouring 36.09 BDP 4A 0.01 0 0 0.000

1 Colouring 36.01 BDP 5 0.01 0 0 0.000

1 Colouring 36.11 BDP 5A 0.01 0 0 0.000

1 Colouring 36.12 BDP 6 0.01 0 0 0.000

1 Colouring 36.13 BDP 6A 0.01 0 0 0.000

1 Colouring 36.14 BDP 6A 0.01 0 0 0.000

1 Colouring 36.15 BDP 0.01 0 0 0.000

1 Colouring 36.16 BDW 0.01 0 0 0.000

1 Colouring 36.17 0.01 0 0 0.000

1 Colouring 36.18 0.01 0 0 0.000

1 Wood Work 37.01 BDQ 1 0.01 0 0 0.000

1 Wood Work 37.02 BDQ 1A 0.01 0 0 0.000

1 Wood Work 37.03 BDQ 2 0.01 0 0 0.000

1 Wood Work 37.04 BDQ 2A 0.01 0 0 0.000

1 Wood Work 37.05 BDQ 3 0.01 0 0 0.000

1 Wood Work 37.06 BDQ 4 0.01 0 0 0.000

1 Wood Work 37.07 BDQ 4A 0.01 0 0 0.000

1 Wood Work 37.08 BDQ 5 0.01 0 0 0.000

1 Wood Work 37.09 BDQ 5A 0.01 0 0 0.000

1 Wood Work 37.01 BDQ 8 0.01 0 0 0.000

1 Wood Work 37.11 0 0.01 0 0 0.000

1 Wood Work 37.12 0 0.01 0 0 0.000

1 Wood Work 37.13 BDQ 18 0.01 0 0 0.000

1 Wood Work 37.14 0 0.01 0 0 0.000

1 Wood Work 37.15 0 0.01 0 0 0.000

1 Wood Work 37.16 BDQ 19 0.01 0 0 0.000

1 Wood Work 37.17 BDQ 19A 0.01 0 0 0.000

1 Wood Work 37.18 BDQ 20 0.01 0 0 0.000

1 Wood Work 37.19 BDQ 21 0.01 0 0 0.000

1 Wood Work 37.20 BDQ 21A 0.01 0 0 0.000

1 Wood Work 37.21 BDQ 0.01 0 0 0.000

1 Wood Work 37.22 BDQ 0.01 0 0 0.000

1 Wood Work 37.23 BDQ 22 0.01 0 0 0.000

1 Wood Work 37.24 BDQ 23 0.01 0 0 0.000

1 Wood Work 37.25 3 BDN 12 B 0.01 0 0 0.000

1 Roofing and Ceiling 38.01 BDR 1 0.01 0 0 0.000

1 Roofing and Ceiling 38.02 BDR 2 0.01 0 0 0.000

1 Roofing and Ceiling 38.03 BDR 3 0.01 0 0 0.000

1 Roofing and Ceiling 38.04 BDR 5 0.01 0 0 0.000

1 Roofing and Ceiling 38.05 BDR 5 0.01 0 0 0.000

1 Roofing and Ceiling 38.06 BDR 7 0.01 0 0 0.000

1 Roofing and Ceiling 38.07 BDR 9 0.01 0 0 0.000

1 Roofing and Ceiling 38.08 BDR 10 0.01 0 0 0.000

1 Roofing and Ceiling 38.09 BDR 10A 0.01 0 0 0.000

1 Roofing and Ceiling 38.01 BDR 10B 0.01 0 0 0.000

1 Roofing and Ceiling 38.11 BDR 11 0.01 0 0 0.000

1 Roofing and Ceiling 38.12 BDR 13 0.01 0 0 0.000

1 Roofing and Ceiling 38.13 BDR 16 0.01 0 0 0.000

1 Roofing and Ceiling 38.14 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.15 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.16 BDR 17 0.01 0 0 0.000

1 Roofing and Ceiling 38.17 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.18 BDR 19 0.01 0 0 0.000

1 Roofing and Ceiling 38.19 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.20 BDR 17 0.01 0 0 0.000

1 Roofing and Ceiling 38.21 BDR 17 0.01 0 0 0.000

1 Roofing and Ceiling 38.22 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.23 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.24 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.25 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.26 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.27 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.28 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.29 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.30 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.31 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.32 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.33 BDR 3 0.01 0 0 0.000

1 Roofing and Ceiling 38.34 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.35 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.36 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.37 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.38 BDR 0.01 0 0 0.000

1 Roofing and Ceiling 38.39 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.40 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.41 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.42 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.43 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.44 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.45 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.46 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.47 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.48 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.49 BDR 0.01 0 0 0.000
1 Roofing and Ceiling 38.50 BDR 0.01 0 0 0.000

1 Doors and Windows 39.01 BDT 0.01 0 0 0.000

1 Doors and Windows 39.02 BDT 0.01 0 0 0.000

1 Doors and Windows 39.03 BDT 4 0.01 0 0 0.000

1 Doors and Windows 39.04 BDT 7 & 8 0.01 0 0 0.000

1 Doors and Windows 39.05 BDT 11 0.01 0 0 0.000

1 Doors and Windows 39.06 BDT 11 0.01 0 0 0.000

1 Doors and Windows 39.07 BDT 11 0.01 0 0 0.000

1 Doors and Windows 39.08 BDT 12 0.01 0 0 0.000

1 Doors and Windows 39.09 BDT 34 0.01 0 0 0.000

1 Doors and Windows 39.01 BDT 36 0.01 0 0 0.000

1 Doors and Windows 39.11 BDT 0.01 0 0 0.000

1 Doors and Windows 39.12 BDT 39 0.01 0 0 0.000

1 Doors and Windows 39.13 BDT 0.01 0 0 0.000

1 Doors and Windows 39.14 BDT 0.01 0 0 0.000

1 Doors and Windows 39.15 BDT 42 0.01 0 0 0.000

1 Doors and Windows 39.16 BDT 42 0.01 0 0 0.000

1 Doors and Windows 39.17 BDT 43 0.01 0 0 0.000

1 Doors and Windows 39.18 BDT 43 0.01 0 0 0.000

1 Doors and Windows 39.19 BDT 53 0.01 0 0 0.000

1 Doors and Windows 39.20 BDT 53 0.01 0 0 0.000

1 Doors and Windows 39.21 BDT 0.01 0 0 0.000

1 Doors and Windows 39.22 BDT 0.01 0 0 0.000

1 Doors and Windows 39.23 BDT 0.01 0 0 0.000

1 Doors and Windows 39.24 BDT 55 0.01 0 0 0.000
1 Doors and Windows 39.25 BDT 55 0.01 0 0 0.000

1 Doors and Windows 39.26 BDT 57 0.01 0 0 0.000

1 Doors and Windows 39.27 BDT 67 0.01 0 0 0.000

1 Doors and Windows 39.28 BDS. 67 0.01 0 0 0.000

1 Doors and Windows 39.29 BDT 53 0.01 0 0 0.000

1 Doors and Windows 39.30 BDT 53 0.01 0 0 0.000

1 Doors and Windows 39.31 BDT 0.01 0 0 0.000

1 Doors and Windows 39.32 BDT 0.01 0 0 0.000

1 Doors and Windows 39.33 BDT 0.01 0 0 0.000

1 Doors and Windows 39.34 BDT 0.01 0 0 0.000

1 Doors and Windows 39.35 BDT 0.01 0 0 0.000

1 Doors and Windows 39.36 BDT 0.01 0 0 0.000

1 Doors and Windows 39.37 BDT 0.01 0 0 0.000
1 Doors and Windows 39.38 BDT 0.01 0 0 0.000
1 Doors and Windows 39.39 BDT 0.01 0 0 0.000
1 Doors and Windows 39.40 BDT 0.01 0 0 0.000
1 Doors and Windows 39.41 BDT 0.01 0 0 0.000
1 Doors and Windows 39.42 BDT 0.01 0 0 0.000
1 Doors and Windows 39.43 BDT 0.01 0 0 0.000
1 Doors and Windows 39.44 BDT 0.01 0 0 0.000
1 Doors and Windows 39.45 0 0.01 0 0 0.000

1 Doors and Windows 39.46 0 0.01 0 0 0.000

1 Doors and Windows 39.47 BDT 0.01 0 0 0.000
1 Doors and Windows 39.48 BDT 0.01 0 0 0.000

1 Doors and Windows 39.49 BDT 0.01 0 0 0.000

1 Doors and Windows 39.50 BDT 0.01 0 0 0.000

1 Doors and Windows 39.51 BDT 0.01 0 0 0.000

1 Doors and Windows 39.52 BDT 0.01 0 0 0.000

1 Doors and Windows 39.53 BDT 0.01 0 0 0.000

1 Doors and Windows 39.54 BDT 0.01 0 0 0.000

1 Doors and Windows 39.55 BDT 0.01 0 0 0.000

1 Doors and Windows 39.56 BDT 0.01 0 0 0.000

1 Doors and Windows 39.57 BDT 0.01 0 0 0.000

1 Doors and Windows 39.58 BDT 0.01 0 0 0.000

1 Doors and Windows 39.59 BDT 0.01 0 0 0.000

1 Doors and Windows 39.60 BDT 0.01 0 0 0.000

1 Doors and Windows 39.61 BDT 0.01 0 0 0.000

1 Doors and Windows 39.62 BDT 0.01 0 0 0.000

1 Doors and Windows 39.63 BDT 0.01 0 0 0.000

1 Doors and Windows 39.64 BDT 0.01 0 0 0.000
1 Doors and Windows 39.65 BDT 0.01 0 0 0.000

1 Doors and Windows 39.66 BDT 0.01 0 0 0.000

1 Doors and Windows 39.67 0 0.01 0 0 0.000

1 Doors and Windows 39.68 BDT 0.01 0 0 0.000

1 Doors and Windows 39.69 BDT 0.01 0 0 0.000

1 Doors and Windows 39.70 BDT 0.01 0 0 0.000

1 Doors and Windows 39.71 BDT 0.01 0 0 0.000

1 Doors and Windows 39.72 BDT 0.01 0 0 0.000

1 Doors and Windows 39.73 BDT 0.01 0 0 0.000

1 Doors and Windows 39.74 BDT 0.01 0 0 0.000

1 Doors and Windows 39.75 BDT 0.01 0 0 0.000

1 Doors and Windows 39.76 BDT 0.01 0 0 0.000

1 Doors and Windows 39.77 BDT 0.01 0 0 0.000

1 Doors and Windows 39.78 BDT 0.01 0 0 0.000

1 Doors and Windows 39.79 BDT 0.01 0 0 0.000

1 Doors and Windows 39.80 BDT 0.01 0 0 0.000

1 Doors and Windows 39.81 Bd T 0.01 0 0 0.000

1 Doors and Windows 39.82 Bd T 0.01 0 0 0.000

1 Doors and Windows 39.83 BDT 0.01 0 0 0.000

1 Doors and Windows 39.84 BDT 0.01 0 0 0.000

1 Doors and Windows 39.85 BDT 0.01 0 0 0.000

1 Doors and Windows 39.86 BDT 0.01 0 0 0.000

1 Doors and Windows 39.87 BDT 0.01 0 0 0.000

1 Doors and Windows 39.88 BDT 0.01 0 0 0.000

1 Doors and Windows 39.89 BDT 0.01 0 0 0.000

1 Doors and Windows 39.90 BDT 0.01 0 0 0.000

1 Doors and Windows 39.91 BDT 0.01 0 0 0.000

1 Doors and Windows 39.92 BDT 0.01 0 0 0.000

1 Doors and Windows 39.93 BDT 0.01 0 0 0.000

1 Doors and Windows 39.94 BDT 0.01 0 0 0.000

1 Iron Work 40.01 BDU 1 0.01 0 0 0.000

1 Iron Work 40.02 BDU 1A 0.01 0 0 0.000

1 Iron Work 40.03 BDU 2 0.01 0 0 0.000

1 Iron Work 40.04 BDU 2A 0.01 0 0 0.000

1 Iron Work 40.05 BDW 0.01 0 0 0.000

1 Iron Work 40.06 BDW 0.01 0 0 0.000

1 Iron Work 40.07 BDW 0.01 0 0 0.000

1 Iron Work 40.08 BDW 0.01 0 0 0.000

1 Iron Work 40.09 BDW 0.01 0 0 0.000

1 Iron Work 40.01 BDW 0.01 0 0 0.000

1 Iron Work 40.11 BDW 0.01 0 0 0.000

1 Water Supply and Sanitary Fitting 0.01 0 0 0.000

2 0.01 0 0 0.000
2 0.01 0 0 0.000
1 Water Supply and Sanitary Fitting 0.01 0 0 0.000

1 Water Supply and Sanitary Fitting 0.01 0 0 0.000

1 Building Miscellaneous items 0.01 0 0 0.000

1 Fire Safety 0.01 0 0 0.000

1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000
1 Fire Safety 0.01 0 0 0.000

1 Fire Safety 0.01 0 0 0.000

1 Building maintenance 46.01 BDW 8 2 0.01 0 0 0.000

1 Building maintenance 46.02 BDW 8 4 0.01 0 0 0.000

1 Building maintenance 46.03 BDW 85A 0.01 0 0 0.000

1 Building maintenance 46.04 BDW 85B 0.01 0 0 0.000

1 Building maintenance 46.05 BDW 85C 0.01 0 0 0.000

1 Building maintenance 46.06 BDW 8 8 0.01 0 0 0.000

1 Building maintenance 46.07 0.01 0 0 0.000

1 Building maintenance 46.08 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.09 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.10 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.11 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.12 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.13 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.14 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.15 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.16 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.17 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.18 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.19 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.20 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.21 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.22 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.23 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.24 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.25 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.26 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.27 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.28 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.29 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.30 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.31 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.32 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.33 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.34 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.35 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.36 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.37 BDW 8 0.01 0 0 0.000

1 Building maintenance 46.38 BDW 0.01 0 0 0.000

1 Building maintenance 46.39 BDW 0.01 0 0 0.000

1 Building maintenance 46.40 BDW 0.01 0 0 0.000

1 Building maintenance 46.41 BDW 0.01 0 0 0.000

1 Building maintenance 46.42 BDW 0.01 0 0 0.000

1 Building maintenance 46.43 BDW 0.01 0 0 0.000

1 Building maintenance 46.44 BDW 0.01 0 0 0.000

1 Building maintenance 46.45 BDW 0.01 0 0 0.000

1 Road Furniture 6.01 MORTH 807 0.01 0 0 0.000

1 Road Furniture 6.02 MORTH 807 0.01 0 0 0.000

1 Road Furniture 6.03 MORTH 807 0.01 0 0 0.000

1 Road Furniture 6.04 MORTH 805 0.01 0 0 0.000

1 Road Furniture 6.05 MORTH 805 0.01 0 0 0.000

1 Road Furniture 6.06 MORTH 805 0.01 0 0 0.000

1 Road Furniture 6.07 MORTH 202 0.01 0 0 0.000

1 Road Furniture 6.08 MORTH 202 0.01 0 0 0.000

1 Road Furniture 6.09 MORTH 202 0.01 0 0 0.000

1 Road Furniture 6.10 MORTH 805.1 0.01 0 0 0.000

1 Road Furniture 6.11 MORTH 805.1 0.01 0 0 0.000

1 Road Furniture 6.12 MORTH 805.1 0.01 0 0 0.000

1 Road Furniture 6.13 MORTH 805.1 0.01 0 0 0.000

1 Road Furniture 6.14 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.15 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.16 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.17 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.18 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.19 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.20 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.21 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.22 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.23 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.24 MORTH 806 0.01 0 0 0.000
1 Road Furniture 6.25 MORTH 806 0.01 0 0 0.000
1 Road Furniture 6.26 MORTH 806 0.01 0 0 0.000
1 Road Furniture 6.27 MORTH 806 0.01 0 0 0.000
1 Road Furniture 6.28 MORTH 804 0.01 0 0 0.000

1 Road Furniture 6.29 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.30 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.31 MORTH 806 0.01 0 0 0.000

1 Road Furniture 6.32 MORTH 806 0.01 0 0 0.000

1 Furniture 6.33 MORTH 806 0.01 0 0 0.000

1 Road Furniture 6.34 MORTH 804 0.01 0 0 0.000

1 Road Furniture 6.35 MORTH 803.4 0.01 0 0 0.000

1 Road Furniture 6.36 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.37 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.38 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.39 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.40 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.41 MORTH 805 0.01 0 0 0.000

1 Road Furniture 6.42 MORTH 805 0.01 0 0 0.000

1 Road Furniture 6.43 MORTH 806 0.01 0 0 0.000

1 Road Furniture 6.44 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.45 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.46 MORTH 801 0.01 0 0 0.000
1 Furniture 6.47 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.48 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.49 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.50 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.51 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.52 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.53 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.54 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.55 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.56 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.57 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.58 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.59 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.60 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.61 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.62 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.63 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.64 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.65 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.66 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.67 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.68 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.69 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.70 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.71 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.72 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.73 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.74 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.75 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.76 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.77 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.78 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.79 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.80 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.81 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.82 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.83 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.84 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.85 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.86 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.87 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.88 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.89 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.90 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.93 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.94 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.95 MORTH 801 0.01 0 0 0.000
1 Road Furniture 6.96 MORTH 801 0.01 0 0 0.000

1 Road Furniture 6.97 MORTH 805 0.01 0 0 0.000

Total
MORTH.As directed by Engineer in charge Number 112 112

As directed by Engineer in charge Cubic Metre 245 245

As directed by Engineer in charge Cubic Metre 300 300

MORTH.As directed by Engineer in charge Cubic Metre 370 370

As directed by Engineer in charge Cubic Metre 425 425

As directed by Engineer in charge Cubic Metre 475 475

As directed by Engineer in charge Cubic Metre 530 530

As directed by Engineer in charge Number 1049 5
As directed by Engineer in charge Kilometre 1235 1135

As directed by Engineer in charge Kilometre 627 627

As directed by Engineer in charge Kilometre 3290 3060

As directed by Engineer in charge Kilometre 759 759

As directed by Engineer in charge Kilometre 1780 1500

As directed by Engineer in charge Kilometre 3910 3070

As directed by Engineer in charge Kilometre 1012 1012
As directed by Engineer in charge Kilometre 380 380

As directed by Engineer in charge Kilometre 7120 2625

As directed by Engineer in charge Kilometre 5240 2425

As directed by Engineer in charge Number 25 10

As directed by Engineer in charge Kilometre 253 253

As directed by Engineer in charge Kilometre 5340 5340

As directed by Engineer in charge Acre 6220 5037
As directed by Engineer in charge Acre 6820 5640

As directed by Engineer in charge Kilometre 5148 1620
As directed by Engineer in charge Kilometre 10470 2460

As directed by Engineer in charge Number 7250 1050

As directed by Engineer in charge Number 25070 21067
As directed by Engineer in charge Running Metre 1343 846

As directed by Engineer in charge Sq.Km. 76770 48005

As directed by Engineer in charge Number 35480 16158
As directed by Engineer in charge Number 7760 2800

As directed by Engineer in charge Number 506 506

As directed by Engineer in charge Number 2222 2222

As directed by Engineer in charge Kilometre 1188 1188

As directed by Engineer in charge Kilometre 680 244

As directed by Engineer in charge Kilometre 2430 2100

As directed by Engineer in charge Kilometre 3000 2600

As directed by Engineer in charge Kilometre 7200 3750
As directed by Engineer in charge Kilometre 8800 5533

As directed by Engineer in charge Kilometre 16258 7126

As directed by Engineer in charge Kilometre 16000 12870
As directed by Engineer in charge Kilometre 17130 14275

As directed by Engineer in charge Kilometre 21490 19775
As directed by Engineer in charge Kilometre 35695 10680

As directed by Engineer in charge Running Metre 1450 225

As directed by Engineer in charge Running Metre 2904 270

As directed by Engineer in charge Running Metre 3360 270
As directed by Engineer in charge Running Metre 2068 270

As directed by Engineer in charge Number 1980 410

As directed by Engineer in charge Number 10320 1743

As directed by Engineer in charge
As directed by Engineer in charge Number 16280 4720

As directed by Engineer in charge Number 13835 6735

As directed by Engineer in charge Kilometre 67 10

As directed by Engineer in charge Shift 2354 1980
As directed by Engineer in charge Number 6900 NA

As directed by Engineer in charge Report 950 NA

As directed by Engineer in charge Kilometre 31590 10480
As directed by Engineer in charge Kilometre 9980 3760

As directed by Engineer in charge Kilometre 10420 4810

As directed by Engineer in charge Kilometre 6060 4960

As directed by Engineer in charge Kilometre 6830 5700
As directed by Engineer in charge Number 6060 3840

As directed by Engineer in charge Kilometre 21590 15090

As directed by Engineer in charge Kilometre 10790 7540

As directed by Engineer in charge Kilometre 640 104

As directed by Engineer in charge Kilometre 227800
157440
As directed by Engineer in charge Number 1650 NA

As directed by Engineer in charge Number 1600 NA

As directed by Engineer in charge Number 1100 NA

As directed by Engineer in charge Number 150 NA

As directed by Engineer in charge Number 100 NA

As directed by Engineer in charge Number 60 NA

As directed by Engineer in charge Number 30 NA

As directed by Engineer in charge Number 15 NA
As directed by Engineer in charge Day 28560 6435

As directed by Engineer in charge Day 8612 687

MORTH 201 Number 141 100 Road Sub grade 2.02
MORTH 201

MORTH 201 Number 200 172
MORTH 201 Number 500 240

MORTH 201 Number 600 320

MORTH 201 Number 1000 1000

MORTH 201 Number 1400 1400

MORTH 201 Square Metre 3 3
MORTH 201 Square Metre 3 3

MORTH 301 Cubic Metre 83 83

MORTH 301 Cubic Metre 51 5

MORTH 301 Cubic Metre 93 93

MORTH 301 Cubic Metre 63 6
MORTH 301 Cubic Metre 160 160

MORTH 301 Cubic Metre 330 122

MORTH 301 Cubic Metre 360 316

MORTH 309 Cubic Metre 90 90

MORTH 309 Cubic Metre 63 7

MORTH 309 Cubic Metre 100 100
MORTH 309 Cubic Metre 74 13

MORTH 309 Cubic Metre 187 165

MORTH 309 Cubic Metre 453 377

MORTH 305 Cubic Metre 42 11

MORTH 305 Cubic Metre 70 25

MORTH 305 Cubic Metre 77 5
MORTH 305 Cubic Metre 225 28

MORTH 305 Cubic Metre 67 14

MORTH 305 Cubic Metre 350 130

MORTH 408 Cubic Metre 91 60

MORTH 408 Cubic Metre 21 21

MORTH 408 Square Metre 4 2

MORTH 404 Square Metre 1 1
MORTH 501 Square Metre 14 13

MORTH 2504 Cubic Metre 114 83

MORTH 402 Cubic Metre 552 11

MORTH 402 Cubic Metre 695 14

MORTH 402 Cubic Metre 509 10
Road Sub grade 2.38 MORTH 402

MORTH 403 Cubic Metre 103 5

3.01 MORTH 401 MORTH 401 Cubic Metre
975 13

3.02 MORTH 401 MORTH 401 Cubic Metre
1013 13
3.03 MORTH 401 MORTH 401 Cubic Metre
868 13

3.04 MORTH 401 MORTH 401 Cubic Metre
734 13

3.05 MORTH 401 MORTH 401 Cubic Metre
767 13

3.06 MORTH 401 MORTH 401 Cubic Metre
800 13
3.07 MORTH 403 MORTH 403 Cubic Metre
648 6

3.08 MORTH 403 MORTH 403 Cubic Metre
1378 15

3.09 MORTH 501.8.2.1 MORTH 501.8.2.1

3.10 MORTH 202 MORTH 202 Cubic Metre
491 318
3.11 MORTH 202 MORTH 202 Cubic Metre
1691 400

3.12 MORTH 309.3.7

3.13 MORTH 309.3.7 MORTH 309.3.7 Running
Metre 11 9

3.14 MORTH 404 MORTH 404 Square
Metre 8 8

3.15 MORTH 404 MORTH 404 Cubic Metre
1100 221
3.16 MORTH 404 MORTH 404 Cubic Metre
1266 221

3.17 MORTH 404 MORTH 404 Cubic Metre
1000 221

3.18 MORTH 404 MORTH 404 Cubic Metre
1100 221
3.19 MORTH 404 MORTH 404 Cubic Metre
1266 221

3.20 MORTH 404 MORTH 404 Cubic Metre
818 221

3.21 MORTH 405 MORTH 405 Cubic Metre
240 88
3.22 MORTH 502 MORTH 502 Square
Metre 11 1

3.23 MORTH 406 MORTH 406 Cubic Metre
997 20

3.24 MORTH 407 MORTH 407 Cubic Metre
736 11

3.25 MORTH 407 MORTH 407 Cubic Metre
813 11
3.26 MORTH 407 MORTH 407 Cubic Metre
810 11

3.27 MORTH 407 MORTH 407 Cubic Metre
560 11

3.28 MORTH 202 MORTH 202 Square
Metre 6 1

3.29 MORTH 502 MORTH 502 Square
Metre 21 0.2

3.30 MORTH 503 MORTH 503 Square
Metre 12.5 0.3

3.31 MORTH 503 MORTH 503 Square
Metre 15 0.2
3.32 MORTH 503 MORTH 503 Square
Metre 13 0.2

3.33 MORTH 503 MORTH 503 Square
Metre 17 0.2

3.34 MORTH 503 MORTH 503 Square
Metre 9 0.2

3.35 MORTH MORTH Square Metre
377 1
3.36 MORTH MORTH Square Metre
390 1

3.37 MORTH MORTH Square Metre
277 1
3.38 MORTH MORTH Square Metre
290 1

3.39 MORTH MORTH Square Metre
240 2
3.40 MORTH 504 MORTH 504 Cubic Metre
5070 45

3.41 MORTH 504 MORTH 504 Cubic Metre
5160 33
3.42 MORTH 504 MORTH 504 Cubic Metre
5070 39

3.43 MORTH 504 MORTH 504 Cubic Metre
5180 39
3.44 MORTH 505 MORTH 505 Cubic Metre
6960 41

3.45 MORTH 505 MORTH 505 Cubic Metre
6499 50
3.46 MORTH 505 MORTH 505 Cubic Metre
5952 50
3.47 MORTH 505 MORTH 505 Cubic Metre
5989 50

3.48 MORTH 507 MORTH 507 Cubic Metre
7413 51
3.49 MORTH 507 MORTH 507 Cubic Metre
7395 43

3.50 MORTH 507 MORTH 507 Cubic Metre
6824 51
3.51 MORTH 507 MORTH 507 Cubic Metre
7395 43

4.01 MORTH 511 MORTH 511 Square
Metre 52 7

4.02 MORTH 511 MORTH 511 Square
Metre 35 1

4.03 MORTH 511 MORTH 511 Square
Metre 37 6
4.04 MORTH 509 MORTH 509 Square
Metre 69 1

4.05 MORTH 509 MORTH 509 Square
Metre 56 1

4.06 MORTH 509 MORTH 509 Square
Metre 69 1

4.07 MORTH 509 MORTH 509 Square
Metre 38 1
4.08 MORTH 510 MORTH 510 Square
Metre 101 14

4.09 MORTH 510 MORTH 510 Square
Metre 158 11
4.10 MORTH 510 MORTH 510 Square
Metre 160 11
MORTH 602 Cubic Metre 5500 50
MORTH 602 Cubic Metre 5600 50
MORTH 602 Cubic Metre 5670 50
MORTH 602 Cubic Metre 5200 600
MORTH 602 Cubic Metre 5300 600
MORTH 602 Cubic Metre 5370 600
MORTH 602 Cubic Metre 5950 50
MORTH 602 Cubic Metre 6040 50
MORTH 602 Cubic Metre 6100 50
MORTH 602 Cubic Metre 5650 250
MORTH 602 Cubic Metre 5740 250
MORTH 602 Cubic Metre 5800 250
MORTH 601 Cubic Metre 3400 45

MORTH 602.2.8 Number 190 50

MORTH 602.2.8 Number 116 45
MORTH 602.2.8 Number 32 10

MORTH 602.6 Running Metre 47 23

MORTH 602.10.3 Running Metre 63 8

MORTH 605 Square Metre 10 1
MORTH 410.3.6 Square Metre 725 100

MORTH 410.3.6 Square Metre 900 100
MORTH Cubic Metre 6362 454

7.01 MORTH 409 MORTH 409 Running
Metre 369 4

7.02 MORTH 409 MORTH 409 Running
Metre 318 4
7.03 MORTH 409 MORTH 409 Running
Metre 371 4

7.05 MORTH 409 MORTH 409 Running
Metre 627 8

7.06 MORTH 409 MORTH 409 Running
Metre 676 8
7.07 MORTH 2703 MORTH 2703 Running
Metre 1799 177

7.08 MORTH 2703 MORTH 2703 Running
Metre 1726 227

7.09 MORTH 2703 MORTH 2703 Running
Metre 1678 189

7.10 MORTH 2703 MORTH 2703 Running
Metre 1657 235
7.11 MORTH MORTH Kilometre 7135
500

7.12 MORTH MORTH Kilometre 640
NA

7.13 MORTH MORTH Kilometre 1280
NA
7.14 MORTH MORTH Kilometre 640
48

7.15 MORTH MORTH Kilometre 15 1

7.16 MORTH 701 MORTH 701 Square
Metre 131 26

7.17 MORTH 701 MORTH 701 Square
Metre 120 24

7.18 MORTH 701 MORTH 701 Square
Metre 109 22
7.19 MORTH 701 MORTH 701 Square
Metre 132 27

7.20 MORTH 701 MORTH 701 Square
Metre 214 48

7.21 MORTH 2503 MORTH 2503 Cubic
Metre 970 130
7.22 MORTH 2503 MORTH 2503 Cubic
Metre 2630 450

7.23 MORTH 701 MORTH 701 Square
Metre 123 39

7.24 MORTH 701 MORTH 701 Square
Metre 130 35

7.25 MORTH 202 MORTH 202 Number 159
128
7.26 MORTH 303 MORTH 303 Square
Metre 116 15

7.27 MORTH 408 MORTH 408 Cubic Metre
209 87

7.28 MORTH 408 MORTH 408 Cubic Metre
237 62

7.29 MORTH 410 MORTH 410 Cubic Metre
577 36
7.30 MORTH 811 MORTH 811 Running
Metre 2600 113

7.31 MORTH 811 MORTH 811 Running
Metre 3881 140
7.32 MORTH 811 MORTH 811 Running
Metre 1940 84

7.33 MORTH 801 MORTH 801 Running
Metre 3025 45
7.34 MORTH 801 MORTH 801 Running
Metre 775 27

7.35 MORTH 2703/811 MORTH 2703/811
7.36 MORTH 2703/811 Running Metre 2908 69

7.37 MORTH 2703/811 MORTH 2703/811

MORTH 3004 Square Metre 48 48
MORTH 3004 Square Metre 35 35

MORTH 3002 Cubic Metre 450 108

MORTH 3003 Square Metre 103 24

MORTH 3003 Square Metre 23 13

MORTH 3004 Cubic Metre 7009 1150

MORTH 3004 Square Metre 216 42

MORTH 3004 Square Metre 241 54
MORTH 3004 Square Metre 105 1.5

As Directed by Engineer In Charge Square Metre 50 30

As Directed by Engineer In Charge Square Metre 135 2.5

As Directed by Engineer In Charge Running Metre 4 4

As Directed by Engineer In Charge Number 1820 728

As Directed by Engineer In Charge Kilometre 1675 793

As Directed by Engineer In Charge Kilometre 200 NA
As Directed by Engineer In Charge Number 165 165

As Directed by Engineer In Charge Square Metre 3.5 3.5

As Directed by Engineer In Charge Kilometre 510 265

As Directed by Engineer In Charge Running Metre 269 33

As Directed by Engineer In Charge Running Metre 185 16

As Directed by Engineer In Charge Running Metre 235 155

As Directed by Engineer In Charge Square Metre 16 10

As Directed by Engineer In Charge Square Metre 4 NA
As Directed by Engineer In Charge Square Metre 913 71

MORTH 514 Square Metre 114 3
MORTH 514 Square Metre 108 3

MORTH 408 Running Metre 192 27

11.01 CD 1 CD.1 Page.No. 159 Cumt
489 72

11.02 CD 3A CD. 3 Page.No. 160 Cumt
3590 866

11.03 CD 3A CD. 3 Page.No. 160 Cumt
3451 866
11.04 CD 3B CD.3 Page.No. 160 Cumt
3380 1034

11.05 CD 3B CD.3 Page.No. 160 Cumt
3230 1034

11.06 CD 4 CD.4 Page.No. 160 Cumt
746 211

11.07 CD 6 CD.6 Page.No. 162 Cumt
1804 450

11.08 CD 7 CD.7 Page.No. 162 RMT
33 NA

11.09 CD 7 CD.7 Page.No. 162 RMT
409 265

11.10 CD 7 CD.7 Page.No. 162 RMT
2800 265
11.11 CD 7 CD.7 Page.No. 162 RMT
586 265

11.12 CD 7 CD.7 Page.No. 162 RMT
684 265

11.13 CD 7 CD.7 Page.No. 162 RMT
865 261

11.14 CD 7 CD.7 Page.No. 162 RMT
3427 183

11.15 CD 7 CD.7 Page.No. 162 RMT
5544 211

11.16 CD 7 CD.7 Page.No. 162 RMT
697 217

11.17 CD 7 CD.7 Page.No. 162 RMT
814 250

11.18 CD 7 CD.7 Page.No. 162 RMT
865 261

11.19 CD 7 CD 7 Page 167 RMT 697
217
11.20 CD 7 CD 7 Page 167 RMT 814
250

11.21 CD 7 CD 7 Page 167 RMT 865
261

11.22 CD 8 CD.8 Page.No. 163 Cumt
4745 1911

11.23 CD 8 CD.8 Page.No. 163 Cumt
4606 1911

11.24 CD 27 CD.14 Page.No. 167
Cumt 165 58

11.25 CD CD.15 Page.No.
168 and B.7. Page No. 38

11.26 CD CD.15 Page.No.
168 and B.7. Page No. 38

11.27 CD 27 CD.20 Page.No. 169
Cumt 330 75
11.28 CD CD 8 Page 163 Cumt
3570 429

11.29 CD CD 8 Page 163 Cumt
4146 1095

11.30 CD Bd E 7 Cumt 4106 689

11.31 CD Bd E 7 Cumt 4823 986

12.01 BR 3A BR.3 Page No. 102

12.02 BR 3A BR.3 Page No. 102

12.03 BR 3B BR.3 Page No. 102
12.04 BR 3B BR.3 Page No. 102

12.05 BR 3C BR.3 Page No. 102

12.06 BR 3C BR.3 Page No. 102

12.07 BR 3D BR.3 Page No. 102

12.08 BR 3D BR.3 Page No. 102

12.09 BR 3E BR.3 Page No. 102

12.10 BR 3E BR.3 Page No. 102

12.11 BR 3F BR 3 Page No. 102

12.12 BR 3G BR.3 Page No. 102

12.13 BR 3G As directed by
Engineer in charge.
12.14 BR 4 A Br. 4 Page No. 103

12.15 BR 4 A Br. 4 Page No. 103

12.16 BR 4 A Br. 4 Page No. 103

12.17 BR 4 A Br. 4 Page No. 103
12.18 BR 4 A Br. 4 Page No. 103

12.19 BR 4 A Br. 4 Page No. 103

12.20 BR 4 A Br. 4 Page No. 103

12.21 BR 4 A Br. 4 Page No. 103
12.22 BR 4 B BR 4 Page No 104.105
Hour 103 94

12.23 BR 4 B BR 4 Page No 104.105
Hour 130 94

12.24 BR 4 B BR 4 Page No 104.105
Hour 150 94

12.25 BR 5A BR.5 Page No.
105 and B.7, Page No. 38
12.26 BR 5A BR.5 Page No.
105 & B 7 / Page No. 38

12.27 BR 6 BR.6 Page No. 105

12.28 BR 8 BR.8 Page No. 108

12.29 BR 9A BR.9 Page No.
109 and B.7, Page No.38

12.30 BR 9A BR.9 Page No.
109 & B 7 / Page No. 38

12.31 BR 10 BR.10 Page No. 110
12.32 BR 13A BR.13 Page No.
112 and B. 7, Page No.38

12.33 BR 13A BR 13 Page No.
112 & B 7/ page no. 38

12.34 BR 13A BR.13 Page No.
112 and B. 7, Page No.38

12.35 BR 13A BR 13 Page No.
112 & B 7/ page no. 38

12.36 BR BR.13 Page No.
112 and B. 7, Page No.38
12.37 BR BR.5 Page No. 105

12.38 BR BR.13 Page No.
112 and B. 7, Page No.38

12.39 BR BR.9 Page No. 109

12.40 BR 14 BR.14 Page No. 113
12.41 BR 14 BR.14 Page No. 113

12.42 BR 14 BR.14 Page No. 113
12.43 BR 14 BR.14 Page No. 113

12.44 BR 14 BR.14 Page No. 113
12.45 BR 14 BR.14 Page No. 113

12.46 BR 14 BR. 14A Page No. 113

12.47 BR 16 BR.16 Page No. 120
Number 3809 915

12.48 BR 16A BR. 16 Page No. 120
Number 5450 882
12.49 BR 17A BR.17 Page No.
120 and B. 7, Page No.38

12.50 BR 17A BR.17 Page No.
120 and B. 7, Page No.38

12.51 BR 17B BR.17 Page No.
120 and B. 7, Page No.38

12.52 BR 17B BR.17 Page No.
120 and B. 7, Page No.38

12.53 BR BR.17 Page No.
120 and B. 7, Page No.38
12.54 BR BR.17 Page No.
120 and B. 7, Page No.38

12.55 BR 59 a As directed by
Engineer in charge.

12.56 BR 59 a As directed by
Engineer in charge.

12.57 BR 59 a As directed by
Engineer in charge.

12.58 BR 59 a As directed by
Engineer in charge.
12.59 BR 59 a As directed by
Engineer in charge.

12.60 BR 59 a As directed by
Engineer in charge.

12.61 BR As directed by
Engineer in charge.

12.62 BR As directed by
Engineer in charge.
12.63 BR As directed by
Engineer in charge.

12.64 BR As directed by
Engineer in charge.

12.65 BR As directed by
Engineer in charge.

12.66 BR As directed by
Engineer in charge.
12.67 BR BR.7. P.No. 107 Number
65041 6215

12.68 BR BR.7. P.No. 107 Number
100800 29836

As directed by
Engineer in charge.
As directed by
Engineer in charge
As directed by
Engineer in charge

BR.35 Page No. 134

As directed by
Engineer in charge

As directed by
Engineer in charge.

BR.36 Page No. 134
Number 160 35

BR.36 Page No. 134
Number 175 35
As directed by
Engineer in charge.

BR.38(a) Page
No. 135 and B.
7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38
BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(a) Page
No. 135 and B.
7, Page No.38

BR.38(a) Page
No. 135 and B.
7, Page No.38
BR.38(a) Page
No. 135 and B.
7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38

Bridge Super Structure
14.16 BR
BR.38(a) Page
No. 135 and B.
7, Page No.38

BR.38(a) Page
No. 135 and B.
7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38
BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38
BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38
BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.38(b & c)
Page No. 135
and B. 7, Page No.38
BR.38(b & c)
Page No. 135
and B. 7, Page No.38

BR.43 Page No. 138

B R.45 Page No. 139
B R.45 Page No. 139

BR.46 Page No. 140

Bridge Super Structure
14.37 BR 47

BR.47(a) Page
No. 140 and B.
7, Page No.38

BR.47(a) Page
No. 140 and B.
7, Page No.38
BR.48 Page No. 142
Number 380 40

BR.50 Page No.
143 and B. 7, Page No.38

BR.50 Page No.
143 and B. 7, Page No.38
BR.51 (a) Page
No. 144 and B.
7, Page No.38

BR.51 (a) Page
No. 144 and B.
7, Page No.38

B.R.51(b) Page No. 145

BR.51(c) Page
No. 145 and B.
7, Page No.38
BR.55 Page No. 150
Number 550 150

BR 38 Page
No.135 and B. 7,
Page No.38

BR 38 Page
No.135 and B. 7,
Page No.38
BR 38 Page
No.135 and B. 7,
Page No.38

M.O.R.T & H 304

BR 21 Page 124,
MORTH 1100 and 1700

M.O.R.T & H 304
BR 21 Page 124,
MORTH 1100 and 1700

M.O.R.T & H 2100

BR 21 Page 124,
MORTH 1100 and 1700

M.O.R.T & H 300,2100

BR 21 Page 124,
MORTH 1100 and 1700
M.O.R.T & H 1400

BR 21 Page 124,
MORTH 1100 and 1700

M.O.R.T & H 1400

BR 21 Page 124,
MORTH 1100 and 1700

M.O.R.T & H 1100, 1700
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 1300, 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 1400, 2200

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H ? 1400, 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 1400, 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 2700 & 2200
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 2200 &
710.1.4 of iRC 78

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 2200 &
710.1.4 of iRC 78

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H 2200 &
710.1.4 of iRC 78

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H
2000,1000,2200
&f IRC 83 1982

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H ?
2000 & 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ?
2000 & 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ?
2000 & 2200
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ?
2000 & 2200

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H ?
2000 & 2200

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2700

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H ? 500, 2700

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2700, 1500,
1600 & 1700
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2700, 1500,
1600 & 1700

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ?
1700 & 2700
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 1500, 1600,
1700 & 2700

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 1800, 2300
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 2800, Square
Metre 124 20

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2600

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2600

BR 21 Page 124,
MORTH 1100 and 1700
MORT & H ? 2600

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2600
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2600

BR 21 Page 124,
MORTH 1100 and 1700

MORT & H ? 2600
BR 21 Page 124,
MORTH 1100 and 1700

MORT & H 2500 Cubic
Metre 847 260

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 1579 330
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 4300 730

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 743 335
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 4208 650

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 1030 NA
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ? 700 & 1500

BR 21 Page 124,
MORTH 1100,
1600 and 1700
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ?2500 Cubic
Metre 5637 935

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ? 2500

BR 21 Page 124,
MORTH 1100,
1600 and 1700
MORT & H ? 2500

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ? 2500

BR 21 Page 124,
MORTH 1100,
1600 and 1700

Bridge : Bored Pile 15.97
MORTH
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2500 Cubic
Metre 1582 112

BR 21 Page 124,
MORTH 1100,
1600 and 1700
MORT & H 2500 Cubic
Metre 3100 410

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2800 Square
Metre 150 48
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H 2800 Square
Metre 112 35

BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ? 2700
BR 21 Page 124,
MORTH 1100,
1600 and 1700

MORT & H ? 1500, 1600,
1700 & 2700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700

BR 21 Page 124,
MORTH 1100 and 1700
BR 21 Page 124,
MORTH 1100 and 1700

MORTH 4th
Revision No.1204
and 1904

As directed by
Engineer in charge.

As directed by
Engineer in charge.
As directed by
Engineer in charge.

As directed by
Engineer in charge.

As directed by
Engineer in charge.
As directed by
Engineer in charge.

As directed by
Engineer in charge.

Bd.A.1 Page No. 259
Bd.A.1 Page No. 259

Bd.A.1 Page No. 259

Bd.A.2 Page No. 259
Bd.A.2 Page No. 259

Bd.A.2 Page No. 259

Bd.A.3 Page No. 259
Bd.A.3 Page No. 259

Bd.A.3 Page No. 259

Bd.A.4 Page No. 259
Bd.A.4 Page No. 259

Bd.A.4 Page No. 259

Bd.A.4 Page No. 259
Bd.A.5 Page No. 259

Bd.A.5 Page No. 259

Bd.A.6 Page No. 260
Bd.A.7, Page No. 260

As directed by
Engineer in charge.

As directed by
Engineer in charge.
As directed by
Engineer in charge.

As directed by
Engineer in charge.

As directed by
Engineer in charge.
As directed by
Engineer in charge.

As directed by
Engineer in charge.

As directed by
Engineer in charge.
0 Cubic Metre 72 72

Bd.A.10 Page No. 262

Bd.A.11 Page No. 263

Bd.A. 12 Page No. 264

Bd.A.13 Page No. 264

As directed by
Engineer in charge.

22.01 Bd B As directed by
Engineer in charge
22.02 Bd B As directed by
Engineer in charge

22.03 Bd B As directed by
Engineer in charge

22.04 Bd B As directed by
Engineer in charge

22.05 Bd B As directed by
Engineer in charge
22.06 Bd B As directed by
Engineer in charge

22.07 Bd B As directed by
Engineer in charge

22.08 Bd B As directed by
Engineer in charge

22.09 Bd B As directed by
Engineer in charge
22.10 Bd B As directed by
Engineer in charge

22.11 Bd B As directed by
Engineer in charge

22.12 Bd B As directed by
Engineer in charge
22.13 Bd B As directed by
Engineer in charge

22.14 Bd B As directed by
Engineer in charge

22.15 Bd B As directed by
Engineer in charge
22.16 Bd B As directed by
Engineer in charge

22.12 Bd B As directed by
Engineer in charge

22.13 Bd B As directed by
Engineer in charge
22.14 Bd B As directed by
Engineer in charge

22.15 Bd B As directed by
Engineer in charge

22.16 Bd B As directed by
Engineer in charge
22.17 Bd B As directed by
Engineer in charge

22.18 Bd B As directed by
Engineer in charge

22.19 Bd B As directed by
Engineer in charge
22.20 Bd B As directed by
Engineer in charge

22.21 Bd/B 4 P270 As directed by
Engineer in charge

22.22 Bd/B 4 P270 As directed by
Engineer in charge
22.23 Bd/B 4 P270 As directed by
Engineer in charge

22.24 Bd/B 4 P270 As directed by
Engineer in charge

22.25 Bd/B 4 P270 As directed by
Engineer in charge
22.26 Bd/B 4 P270 As directed by
Engineer in charge

22.27 Bd/B 4 P270 As directed by
Engineer in charge

22.28 Bd/B 4 P270 As directed by
Engineer in charge
22.29 Bd/B 4 P270 As directed by
Engineer in charge

22.30 Bd/B 4 P270 As directed by
Engineer in charge

22.31 Bd/B 4 P270 As directed by
Engineer in charge
22.32 Bd/B 4 P270 As directed by
Engineer in charge

22.33 Bd/B 4 P270 As directed by
Engineer in charge

22.34 Bd/B 4 P270 As directed by
Engineer in charge
22.35 Bd/B 4 P270 As directed by
Engineer in charge

22.36 Bd/B 4 P270 As directed by
Engineer in charge

22.37 Bd/B 4 P270 As directed by
Engineer in charge
22.38 Bd/B 4 P270 As directed by
Engineer in charge

22.39 Bd/B 2 P269 As directed by
Engineer in charge

22.40 Bd/B 2 P269 As directed by
Engineer in charge

22.41 Bd/B 2 P269 As directed by
Engineer in charge

22.42 Bd/B 2 P269 As directed by
Engineer in charge
22.43 Bd/B 8 P271 As directed by
Engineer in charge

22.44 Bd/B 8 P271 As directed by
Engineer in charge

22.45 Bd/B 8 P271 As directed by
Engineer in charge

22.46 Bd/B 8 P271 As directed by
Engineer in charge

22.47 Bd/B 8 P271 As directed by
Engineer in charge
22.48 Bd/B 8 P271 As directed by
Engineer in charge

22.49 Bd/B 8 P271 As directed by
Engineer in charge

22.5 As directed by
Engineer in charge

22.51 As directed by
Engineer in charge

22.52 As directed by
Engineer in charge

22.53 As directed by
Engineer in charge

22.54 As directed by
Engineer in charge

22.55 As directed by
Engineer in charge
22.56 As directed by
Engineer in charge

22.57 As directed by
Engineer in charge

22.58 As directed by
Engineer in charge

22.59 22.59

22.6 As directed by
Engineer in charge
22.61 As directed by
Engineer in charge

22.62 As directed by
Engineer in charge

22.63 As directed by
Engineer in charge

Bd.C.2 Page No. 275 Metric Tonne 56400
7144
Bd.C.3 Page No. 275 Metric Tonne 50800
5544

Bd.C.6 Page No. 277 Metric Tonne 51250
6086

Bd.C.8 Page No. 278 Metric Tonne 63800
7950
As directed by Engineer in charge.

As directed by Engineer in charge. Metric Tonne 74000
11280

B 18 Page No. 78 Metric Tonne 74000 9873

B.18, Page No 78 Centimetre 5 2

Spec. No. As directed byEngineer in Charge.
Spec.No.: Bd.W.6/Page No.585 Square Metre 1789 200

Spec. No. As directed byEngineer in Charge. M.T. 89894 16612

Spec. No. As directed byEngineer in Charge. M.T. 82381 12550

Bd. E. 1 Page No. 287 Cubic Metre 3700 885
Bd. E. 1 Page No. 287 Cubic Metre 3550 885

Spec. No. Bd.E. 1 Page No. 287 0 4012 555

Bd.E.2 Page No. 288 and B.7 Page No 38 Cubic Metre 4248 480

Bd.E.2 Page No. 288 and B.7 Page No 38 Cubic Metre 5020 885
Bd.E.2 Page No. 288 and B.7 Page No 38 Cubic Metre 5396 885

Bd.E.2 Page No. 288 and B.7 Page No 38 Cubic Metre 5380 885
Bd.E.4 Page No. 289 and B 7, Page No.38

Bd.E.4 Page No.
289 and B 7, Page No.38
Bd.E.4 Page No. 289 and B 7, Page No.38

Bd.E.4 Page No. 289 and B 7, Page No.38
Bd.E.7 Page No 291 and B 7 Page No .38

Bd.E.7 Page No
291 and B 7 Page No .38
Bd.E. 5/Page No.
290/I.S. 456 (2000)

Bd.E. 5/Page No.
290/I.S. 456 (2000)
Bd.E. 3/Page No.
288/I.S. 456 (2000)

Spec No. : As directed by
Engineer in charge.

Spec.No.: As directed by
Engineer incharge.
25.01 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.02 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.03 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.04 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.05 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.06 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.07 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.08 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.09 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.10 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.11 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.12 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.13 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.14 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.15 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.16 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.17 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.18 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.19 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38

25.20 BDF 3 Bd.F.3 Page No.
298 and B.7, Page No.38
25.21 BDF 3 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.22 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.23 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.
25.24 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.

25.25 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.

25.26 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.
25.27 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.28 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.29 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38
25.30 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.31 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.32 BDF 5 25.32 BDF 5
25.33 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.

25.34 BDF 5 Bd.F.5 Page No.
300 and B7,Page No 38.

25.35 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38
25.36 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.37 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.38 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38
25.39 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.40 BDF 5 Bd.F.5 Page No.
300 and B.7, Page.No. 38

25.41 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.42 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.43 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.44 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.45 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.46 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.47 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.48 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.49 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.50 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.51 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.52 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.53 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.54 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.55 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.56 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.57 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.58 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38

25.59 BDF 6 Bd.F.6 Page No.
300 and B.7, Page No.38
25.60 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.61 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.62 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.63 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.64 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.65 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.66 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.67 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.68 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.69 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.70 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.71 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.72 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.73 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.74 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.75 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.76 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
25.77 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.78 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38

25.79 BDF 8 Bd.F.8 Page No.
302 and B.7, Page No.38
26.01 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38

26.02 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38

26.03 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38
26.04 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38

26.05 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38

26.06 BDF 9 Bd.F.9 Page No.
303 and B.7, Page No.38
26.07 BDF 9 26.07 BDF 9

26.08 BDF9 Bd.F.9 Page No.
303 and B.7, Page No.38

26.09 BDF10 0 0 10786 4106

26.10 BDF10 0 0 8210 2085
26.11 BDF10 0 0 10934 4106

26.12 BDF10 0 0 8775 2085

26.13 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38

26.14 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38
26.15 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38

26.16 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38

26.17 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38
26.18 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38

26.19 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38

26.20 BDF 11 Bd.F.11 Page No.
304 and B.7, Page No. 38
26.21 BDF 12 Bd. F. 12 Page
No. 304 & B 7, Pg 38

26.22 BDF 12 Bd. F. 12 Page
No. 304 & B 7, Pg 38
26.23 BDF 12 Bd. F. 12 Page
No. 304 & B 7, Pg 38

26.24 BDF 12 Bd. F. 12 Page
No. 304 & B 7, Pg 38
26.25 BDF 13A Bd. F. 13 Page
No. 305 /I.S. 456 (2000

26.26 BDF 13A Bd. F. 13 Page
No. 305 /I.S. 456 (2000
26.27 BDF 14A Bd. F. 14 Page
No. 305 /I.S. 456 (2001

26.28 BDF 14A Bd. F. 14 Page
No. 305 /I.S. 456 (2002
26.29 BDF 15A Bd. F. 15 Page
No. 306 /I.S. 456 (2003

26.30 BDF 15A Bd. F. 15 Page
No. 306 /I.S. 456 (2003
26.31 BDF 16 Bd. F. 16 Page
No. 306 /I.S. 456 (2004

26.32 BDF 16 Bd. F. 16 Page
No. 306 /I.S. 456 (2004
26.33 BDF 17 Bd.F.17, Page No. 306

26.34 BDF 17 Bd.F.17, Page No. 306

26.35 BDF 17 Bd.F.17, Page No. 306
26.36 0 (As directed by
Engineer in Charge)

26.37 MORT & H 1600 Edition
2001.
26.38 MORT & H 1600 Edition
2001.
26.39 MORT & H 1600 Edition
2001.
26.4 MORT & H 1600 Edition
2001.
26.41 MORT & H 1600 Edition
2001.
26.42 MORT & H 1600 Edition
2001.
26.43 MORT & H 1600 Edition
2001.
26.44 MORT & H 1600 Edition
2001.

26.45 NA
26.46 BDF 20 Bd. F. 20 Page No. 307

26.47 BDF 20 Bd. F. 20 Page No. 308
26.48 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.49 BDF 41 As directed by
Engineer in charge.
26.50 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.51 BDF 41 As directed by
Engineer in charge.
26.52 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.53 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.54 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.
26.55 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.56 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.57 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.
26.58 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.59 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.60 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.
26.61 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.62 BDF 41 Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.
26.63 BDF Bd.F.6, Page
No.300 / Bd.F.8,
Page No.302 and
B.7 Page No. 38.

26.64 BDF Bd.E.2 Page No.
288 and B.7 Page No 38

26.65 BDF Bd.E.2 Page No.
288 and B.7 Page No 38
26.66 BDF 41 Bd.E.4 Page No.
289 and B 7, Page No.38

26.67 BDF 41 Bd.E.4 Page No.
289 and B 7, Page No.38

26.68 BDF As directed by
Engineer in charge
26.69 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.70 0 As directed by
Engineer in charge

26.71 0 As directed by
Engineer in charge

26.72 0 As directed by
Engineer in charge
26.73 0 As directed by
Engineer in charge

26.74 0 As directed by
Engineer in charge

26.75 0 As directed by
Engineer in charge

26.76 0 As directed by
Engineer in charge
26.77 0 As directed by
Engineer in charge

26.78 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.79 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38
26.80 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.81 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.82 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38
26.83 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.84 BDF 3a,b Bd. F 3 page No.
298 and B 7, Page No. 38

26.85 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38
26.86 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38

26.87 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38

26.88 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38
26.89 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38

26.90 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38

26.91 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38
26.92 BDF 5 Bd. F 5 page No.
300 and B 7, Page No. 38

26.93 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38

26.94 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38
26.95 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38

26.96 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38

26.97 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38
26.98 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38

26.99 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38

26.100 BDF 6 Bd. F 6 page No.
300 and B 7, Page No. 38
26.101 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.102 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.103 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38
26.104 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.105 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.106 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38
26.107 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.108 BDF 8 Bd. F 8 page
No.302 and B 7,
Page No. 38

26.109 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302
26.110 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302

26.111 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302

26.112 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302
26.113 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302

26.114 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302

26.115 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302

26.116 BDF 41 Bd. F 6 page No.
300 and B 7,
Page No. 38 and
Bd. F 8 Page No. 302
Bd.G. 1 Page No. 313 Cubic Metre 4930 886

Bd.G.2 Page No. 313 Cubic Metre 5130 886

Bd.G.3 Page No. 314 Cubic Metre 4800 750

0 0 5400 1450 Brick Masonry 27.05
BDG 5

Bd.G.5 Page No. 315 Cubic Metre 4950 886
Bd.G.7 Page No. 316 Square Metre 660 110

Bd.G.8 Page No. 317 Square Metre 625 110

Bd.G.9 (a) Page No. 317 Cubic Metre 5400 1450

Bd.G.9 (b) Page No. 317 Cubic Metre 5500 1450

Bd.G.10 (a) Page No. 318 Cubic Metre 5000 1050
Bd.G.10 (b) Page No. 318 Cubic Metre 5200 1050

As director by engineer incharge Cubic Metre 4680 900
and BDG 2 & 5

As director by engineer incharge Cubic Metre 4700 900
and BDG 2 & 5

Bd. G. 7 Page 316 Square Metre 675 110

As directed by engineer in charge Cubic Metre 7050 960
As directed by engineer in charge Square Metre 820 115

Bd.H.1 Page No. 329 Cubic Metre 2850 1058

Bd.H.2 Page No. 329 Cubic Metre 2950 1058

Bd.H.3 Page No. 331 Cubic Metre 3350 1058

Bd.H.4 Page No. 331 Cubic Metre 3050 1350
Bd.H.5 Page No. 331 Cubic Metre 3150 1600

Bd.H.6 Page No. 332 Cubic Metre 3225 1650

Bd.H.7 Page No. 332 Cubic Metre 3170 1650

Bd.H.8 Page No. 332 Cubic Metre 3450 1700

Bd. H.11 Page No. 333 Cubic Metre 6500 1650

Bd.H.12 Page No. 333 Cubic Metre 6700 1700
Bd.H.13 Page No. 333 Cubic Metre 6600 1650

Bd.H.14 Page No. 333 Cubic Metre 7100 2130

Bd.H.40 Page No. 345 Cubic Metre 6995 2200

Bd.H.15 Page No.334. Cubic Metre 3630 750

29.01 BDI 1 Bd.I.1 Page No. 349

29.02 BDI 1 Bd.I.1 Page No. 349

29.03 BDI As directed by
Engineer in Charge.
29.04 BDI As directed by
Engineer in Charge.

29.05 BDI As directed by
Engineer in Charge.

29.06 BDI As directed by
Engineer in Charge.

29.07 BDI As directed by
Engineer in Charge.
29.08 BDI As directed by
Engineer in Charge.

29.09 BDI As directed by
Engineer in Charge.

29.01 BDI As directed by
Engineer in Charge.

29.11 BDI (As directed by
Engineer in Charge)
29.12 BDI As directed by
Engineer in Charge.

29.13 BDI As directed by
Engineer in Charge.

Bd.K.1 Page No. 359 Square Metre 3090 525

Bd.K.1 Page No. 359 Square Metre 3385 210
Bd.K.1 Page No. 359 Square Metre 3825 385

Bd.K.1 Page No. 359 Square Metre 4509 580

Bd K 1 A Square Metre 4518 960 Expansion Joint 30.06
BDK 1B

Bd.K.1 B Square Metre 5015 960

Bd.K.1 C Square Metre 4495 900

Bd.K.1 D Square Metre 4575 900
As directed by Engineer in charge Running Metre 1750 120

As directed by Engineer in charge Running Metre 1575 120

As directed by Engineer in charge Square Metre 1410 130

Bd.J.2 Page No. 355 Square Metre 275 50

Bd.J.3 Page No. 356 Square Metre 130 19
As directed by Engineer in charge. Litre 21 12

As directed by Engineer in charge. Square Metre 575 125
As directed by Engineer in charge. Square Metre 310 80

As directed by Engineer in charge. Square Metre 256 133

As directed by Engineer in charge. Square Metre 381 186

As directed by Engineer in charge. Square Metre 13 13

As directed by Engineer in charge Square Metre 692 375
As directed by Engineer in charge Square Metre 820 39

As directed by Engineer in charge Square Metre 715 50
Bd.J.2 Page No. 355 Square Metre 797 160

Bd.J.2 Page No. 355 Square Metre 718 151

As directed by Engineer in charge Running Metre 835 255
As directed by Engineer in charge. Square Metre 295 58

As directed by Engineer in charge. Square Metre 485 63

As directed by Engineer in charge Square Metre 230 74
As directed by Engineer in charge. Cum. NA NA
As directed by Engineer in charge. Square Metre NA NA
As directed by Engineer in charge Square Metre 1617 405

As directed by Engineer in charge. Square Metre 931 226
As directed by Engineer in charge. Square Metre NA NA
As directed by Engineer in charge Square Metre NA NA
As directed by Engineer in charge. Square Metre NA NA
As directed by Engineer in charge. Square Metre NA NA

Bd.L.1 Page No. 367 Square Metre 74 35

Bd.L.1 Page No. 367 Square Metre 115 35

Bd. L.2 Page No. 368 Square Metre 110 48
Bd. L.2 Page No. 368 Square Metre 130 53

Bd.L.2 Page No. 368 Square Metre 130 53

Bd.L.4 Page No. 368 Square Metre 245 68

Bd.L.4 Page No. 368 Square Metre 260 68

Bd.L.4 Page No. 368 Square Metre 270 68

Bd.L.5 Page No. 368 Square Metre 310 71
Bd.L.7 Page No. 369 Square Metre 400 100

Bd.L.8 Page No. 370 Square Metre 340 88

Bd.L.9, Page No.370 Square Metre 350 114
Spec.No.: As directed by Engineer incharge. Square Metre 505 200

Bd. L.10, Page No.370 Square Metre 25 12

Bd. L.15 Page No. 372 Square Metre 70 25

Bd. L.15 Page No. 372 Square Metre 90 28

Bd. L. 16 Page No. 373 Square Metre 120 33

Bd. L. 17 Page No. 373 Square Metre 120 36

Bd. L. 18 Page No. 373 Square Metre 80 30

As directed by Engineer in charge. Square Metre 55 18
As directed by Engineer in charge. Running Metre 25 20

As directed by Engineer in charge. Running Metre 20 15

As directed by Engineer in charge. Running Metre 25 19

As directed by Engineer in charge. Running Metre 40 19

As directed by Engineer in Charge: Square Metre 90 27

As directed by Engineer in Charge. Square Metre 85 41

As directed by Engineer in Charge. Square Metre 175 33
As directed by Engineer in Charge. Square Metre 850 370

As directed by Engineer in charge. Square Metre 340 222
As directed by Engineer in charge. Square Metre 419 222

As directed by Engineer in charge. Square Metre 505 200

As directed by Engineer in charge. Square Metre 26 26

As directed by Engineer in charge. Square Metre 132 69
As directed by Engineer in charge. Square Metre 200 86

As directed by Engineer in charge. Square Metre 24 17

As directed by Engineer in charge. Square Metre 25 20

33.01 BDM 1 Bd.M.1 Page No. 379

33.02 BDM 1A Bd.M.1 Page No. 379

33.03 BDM 1B Bd.M.1 Page No. 379
33.04 BDM 3 Bd.M.3 Page No. 380

33.05 BDM 3A Bd.M.3 Page No. 380

33.06 BDM 3B Bd.M.3 Page No. 380

33.07 BDM Bd.M.3 Page No.380

33.08 BDM Bd.M.3 Page No.380
33.09 BDM 7 Bd.M.7 Page No. 383

33.01 BDM 7 Bd.M.7 Page No. 383

33.11 BDM 6 Bd.M.6 Page No. 381

33.12 BDM 6 Bd.M.6 Page No. 381
33.13 BDM 7A Bd.M.7 Page No. 383

33.14 BDM 7A Bd.M.7 Page No. 383

33.15 BDM 6A Bd.M.6 Page No. 381

33.16 BDM 6A Bd.M.6 Page No. 381
33.17 BDM 22 Bd.M.22 Page No. 390

33.18 BDM 22B Bd.M.22 Page No. 390

33.19 BDM 29B Bd.M.29 Page No. 391

33.20 BDM 29C Bd.M.29 Page No. 391

33.21 0 Spec.No.: Bd.M.31/Page
No.392

33.22 0 Spec.No.: Bd.M.31/Page
No.393
33.23 BDM 15 Bd.M.29 Page No. 391

33.24 BDM 12 Bd.M.12 Page No. 385.

33.25 BDM 13 Bd.M.13 Page No. 386.

33.26 BDM 13 Bd.M.13 Page No. 386.

33.27 BDM 13 Bd.M.13 Page No. 386.

33.28 BDM As directed by
Engineer in charge.
33.29 BDM As directed by
Engineer in charge.

33.30 BDM As directed by
Engineer in charge

33.31 BDM As directed by
Engineer in charge

33.32 BDM 35 Bd.M.35 B/P No.393

33.33 BDM 35 Bd.M.35 B/P No.393

33.34 BDM 3 Bd.M. 3 B/Page No. 380

33.35 BDM 22 Bd. M.22 B/Page No. 390
33.36 BDM 35 Bd.M.35 B/Page No.393

33.37 BDM 35 Bd.M.35 B/Page No.393

33.38 BDM 35 Bd.M.35C / Page No. 393

33.39 BDM 35 Bd.M.35C / Page No. 393

33.40 BDM 12 Bd.M. 12 Page No.385
33.41 BDM 12 Bd.M. 12 Page No.385

33.42 BDM 12 Bd.M.12 Page No. 385

33.43 BDM 12 Bd.M.12 Page No. 385
33.44 BDM 12 Bd.M.12 Page No. 385

33.45 BDM 12 Bd.M.12 Page No. 385

33.46 BDM 12 Bd.M. 12 Page No. 385
33.47 BDM 12 Bd.M. 12 Page No. 385

33.48 BDM 12 Bd. M. 12 Square Metre
1570 510

33.49 BDM A directed by Engineer in
charge

33.50 BDM A directed by Engineer in
charge

33.51 BDM A directed by Engineer in
charge
33.52 BDM As directed by
Engineer in charge

33.53 BDM 12 Bd. M 12 page No. 385

33.54 BDM Bd. M. Square Metre 910
101

33.55 BDM As directed by
Engineer in charge

33.56 BDM As directed by
Engineer in charge
33.57 BDM As directed by
Engineer in charge

33.58 BDM 12 Bd. M 12 page No. 385

33.59 0 Bd. M 12 page No. 386

33.60 0 Bd. M 12 page No. 387
33.61 0 Bd. M 12 page No. 388

33.62 0 Bd. M 12 page No. 386

33.63 0 Bd. M 12 page No. 387

33.64 0 Bd. M 12 page No. 388
33.65 BDM 12 Bd. M 12 page No. 385

33.66 BDM Bd. M 12 page No. 385

33.67 BDM Bd. M 12 page No. 385

33.68 BDM As directed by Engineer
InCharge
33.69 BDM As directed by Engineer
InCharge

33.70 BDM As directed by Engineer
InCharge

33.71 BDM As directed by Engineer
InCharge

33.72 BDM As directed by Engineer
InCharge

33.73 BDM As directed by Engineer
InCharge
33.74 BDM As directed by Engineer
InCharge

33.75 BDM Bd. M 3 page No. 380
33.76 BDM As directed by Engineer
In Char

33.77 BDM As directed by Engineer
In Char

33.78 BDM As directed by
Engineer in Charge

33.79 BDM As directed by
Engineer in Charge

33.80 BDM As directed by
Engineer in Charge
Bd. N. 1. 1 Page No. 399 Square Metre 12 8

Bd.N.1.1 Page No. 399 Square Metre 21 9

Bd.N.1.2 Page No. 399 Square Metre 25 13

Bd. N. 1.2 Page No. 399 Square Metre 20 11

Bd.N.1.3 Page No. 399 Square Metre 55 18

Bd.N.1.3 Page No. 399 Square Metre 100 20

Bd.N.1.4 Page No. 400 Square Metre 17 7

Bd.N.1.4 Page No. 400 Square Metre 27 11

As directed by Engineer in charge. Square Metre 655 237

As directed by Engineer in charge. Square Metre 13 10

As directed by Engineer in charge. Square Metre 25 18
Bd.O. 1 Page No. 403 Square Metre 50 11

Bd.0.2 Page No. 404 Square Metre 30 7

Bd.0.2 Page No. 404 Square Metre 40 10

Bd.0.3 Page No. 404 Square Metre 50 11

Bd.O.4 Page No. 405 Square Metre 40 9

Bd.0.4 Page No. 405 Square Metre 50 11
Bd.O.5 Page No. 405 Square Metre 50 11

Bd.0.6 Page No. 406 Square Metre 35 9

Bd.0.6 Page No. 406 Square Metre 50 11

Bd.0.7 Page No. 406 Square Metre 35 9

0 Square Metre 60 32 Oil Painting 35.12
BDO 7A

Bd.O.7 Page No. 406 Square Metre 50 11
Bd.0.8 Page No. 406 Square Metre 40 11

As directed by Engineer incharge. Square Metre 51 26

Spec.No.: Bd.O.8/Page No.406 Square Metre 67 35

Spec.No.: Bd.O.8/Page No.406 Square Metre 66 35

NA NA NA NA
As directed by Engineer in charge. Square Metre 8 8

As directed by Engineer in charge. Square Metre 20 6
As directed by En gineer in charge. Square Metre 15 6

As directed by Engineer in charge. Square Metre 18 7

As directed by Engineer in charge. Square Metre 12 6

As directed by Engineer in charge. Square Metre 210 40

As directed by Engineer in charge. Square Metre 120 26

As directed by Engineer in charge. Square Metre 160 41
As directed by Engineer in charge. Square Metre 145 60

As directed by Engineer in charge. Square Metre 23 20

As directed by Engineer in charge. Square Metre 8 8

As directed by Engineer incharge. Square Metre 17 7

Bd.P.1 Page No. 411 Square Metre 4 2

Bd. P. I Page No. 411 Square Metre 6 3

Bd. P.2 Page No. 412 Square Metre 7 7

Bd.P.2 Page No. 412
Bd.P.3 Page No. 412 Square Metre 11 2.5

Bd.P.3 Page No. 412 Square Metre 12 5

Bd.P.4 Page No. 413 Square Metre 13 5

Bd. P.4 Page No. 413 Square Metre 18 5

Bd. P.5 Page No. 413 Square Metre 25 9

Bd.P.5 Page No. 413 Square Metre 35 11

Bd.P.6 Page No. 414 Square Metre 62 18

Bd.P.6 Page No. 414 & Preapproval of Square Metre 70 18
Superintending Engineer
Bd.P.6 Page No. 414 & Preapproval of Square Metre 82 23
Superintending Engineer

As directed by Engineer in charge. Square Metre 2 1.5

As directed by Engineer in charge. Number NA NA

As directed by Engineer in charge. Square Metre 89 43

Bd.Q. 1 Page No. 419 Square Metre 1980 97

Bd.Q.1 Page No. 419 Square Metre 4080 96

Bd.Q.2 Page No. 420 Cubic Metre 96500 2782

Bd.Q.2 Page No. 420 Cubic Metre 37500 3883
Bd.Q.3 Page No. 421 Square Metre 1960 141

Bd.Q.4, Page No. 422 Cubic Metre 92320 7157

Bd.Q.4, Page No. 422 Cubic Metre 48584 4194

Bd.Q.5, Page No. 423 Cubic Metre 86680 6533

Bd.Q.5, Page No. 423 Cubic Metre 42969 4872

Bd.Q.8, Page No. 425 Running Metre 720 304

Bd/Q 6 P 424 Square Metre 970 123
Bd/Q 6 P 425 Square Metre 384 133

Bd.Q. 18 Page No. 431 Square Metre 926 169

As directed by Engineer incharge. Square Metre 2129 834

As directed by Engineer incharge. Square Metre 1646 826

Bd.Q. 19 Page No. 432 Running Metre 433 49

Bd.Q. 19 Page No. 432 Running Metre 205 98

Bd.Q.20 Page No. 432 Running Metre 231 49
Bd.Q.21 Page No. 433 Running Metre 448 71

Bd.Q.21 Page No. 433 Running Metre 240 132

As directed by Engineer in charge. Square Metre 1808 274

As directed by Engineer in charge. Square Metre 2067 468

Bd.Q.22/Page No.434 Rmt. 120 25 Wood Work 37.24
BDQ 23

Bd.Q.22/Page No.434 Rmt. 190 30 Wood Work 37.25
3 BDN 12 B
Bd.N.1.2/Page No.399 Sq.M. 30 18 Roofing and Ceiling
38.01 BDR 1

Bd.R.1, Page No. 449 Square Metre 458 56

Bd.R.2, Page No. 450 Square Metre 667 60

Bd.R.3, Page No. 450 Running Metre 125 24

Bd.R.5, Page No. 453 Square Metre 674 42

Bd.R.5, Page No. 453 Square Metre 760 101
Bd. R.7, Page No. 453 Square Metre 367 54

Bd.R.9, Page No. 455 Running Metre 310 37

Bd. R. 10, Page No. 455 Running Metre 1750 129

Bd. R. 10, Page No. 455 Running Metre 1350 150

Bd. R. 10, Page No. 455 Running Metre 1450 130

Bd. R. 11, Page No. 456 Number 332 18 Roofing and Ceiling
38.12 BDR 13

Bd. R. 13, Page No. 459 Number 92 15 Roofing and Ceiling
38.13 BDR 16
Bd.R.16, Page No. 460 Square Metre 928 110

As directed by Engineer in charge. Square Metre 809 440
As directed by Engineer in charge. Square Metre 625 402

Bd. R. 17 Page No. 461 Square Metre 725 110

As directed by Engineer in charge. Square Metre 730 114
Bd. R. 19 Page No. 462 Square Metre 1449 415

As directed by Engineer in charge. Square Metre 1541 395

Bd. R. 17, Page No. 461 Square Metre 1113 110
Bd. R. 17, Page No. 461 Square Metre 1831 330

As directed by Engineer in charge. Square Metre 53 18

As directed by Engineer in charge. Square Metre 25 15

As directed by Engineer in charge. Square Metre 30 20

As directed by Engineer in charge Square Metre 17 17

As directed by Engineer in charge. Square Metre 41 41

As directed by Engineer in charge. Square Metre 123 123

As directed by Engineer in charge. Metric Tonne 1083 1140

As directed by Engineer in charge. Running Metre 65 7

As directed by Engineer in charge. Running Metre 41 9
As directed by Engineer in charge. Square Metre 1000 65

As directed by Engineer in charge. Number 60 25

Bd. R. 3A., Page No. 449 Square Metre 571 94

As directed by Engineer in charge. Square Metre 820 58
As directed by Engineer in charge. Running Metre 935 58
As directed by Engineer in charge. Running Metre 1135 58

As directed by Engineer in charge. Square Metre 1015 65

As directed by Engineer in charge. Square Metre 557 40
As directed by Engineer in charge. Square Metre 1805 225
As directed by Engineer in charge. Square Metre 2010 225
As directed by Engineer in charge. Square Metre 1709 2
As directed by Engineer in charge. Square Metre 1825 2
As directed by Engineer in charge. Square Metre 2115 43
As directed by Engineer in charge. Square Metre 2385 2
As directed by Engineer in charge. Square Metre 2297 145
As directed by Engineer in charge. Square Metre 1596 148
As directed by Engineer in charge. Square Metre 2149 148
As directed by Engineer in charge. Square Metre 1646 148
As directed by Engineer in charge. Square Metre 1453 148
As directed by Engineer in charge. Square Metre 1264 148

As directed by Engineer in charge. Cubic Metre 105610
18000

As directed by Engineer in charge. Cubic Metre 44968
22604
Bd T 4 Page No. 479 Square Metre 2676 800

Bd T 7 & 8 Page No. 481 82 Square Metre 5400 1689

As directed by Engineer in charge. Square Metre 3033 956
As directed by Engineer in charge. Square Metre 4561 1553

As directed by Engineer in charge. Square Metre 3327 831

Bd T 11 & 12, Page No. 482483 Square Metre 4530 1670
Bd T 34, Page No. 499 Square Metre 2333 246

Bd T 36, Page No. 500 Square Metre 1612 423

As directed by Engineer in charge. Square Metre 1948 442

Bd T 39, Page No. 500 Square Metre 2972 398
As directed by Engineer in charge. Square Metre 1552 274

As directed by Engineer in charge. Square Metre 2735 578

Bd T 42, Page No. 503 Square Metre 2390 813

Bd T 42, Page No. 503 Square Metre 2771 731

Bd T 43, Page No. 503 Square Metre 3441 553

Bd T 43, Page No. 503 Square Metre 3945 646
Bd T 53, Page No. 509 Square Metre 2475 225

Bd T 53, Page No. 509 Square Metre 2893 385

As directed by Engineer in charge. Square Metre 2278 530
As directed by Engineer in charge Square Metre 2598 148

As directed by Engineer in charge Square Metre 2598 148
Bd.T.55, Page No. 510 Square Metre 2350 225
Bd.T.55, Page No. 510 Square Metre 2600 250

Bd.T.57, Page No. 511 Square Metre 2923 600
Bd T 67, Page No. 515 Square Metre 1521 550

Bd.S . Page No. 465 to 467 Square Metre 583 76

Bd. T. 53, Page No. 509 & As directed by Square Metre 2105 378
Engineer in charge.

Bd. T. 53, Page No. 509 and As directed by Square Metre 2914 583
Engineer in charge.

As directed by Engineer in charge. Square Metre 2120 300

As directed by Engineer in charge. Running Metre 111 36
As directed by Engineer in charge. Square Metre 1714 357

As directed by Engineer in charge Square Metre 1320 308

As directed by Engineer in charge. Square Metre 910 200

As directed by Engineer in charge. Square Metre 831 284
As directed by Engineer incharge. Square Metre 4211 770
As directed by engineer incharge. Square Metre 3523 1258
As directed by engineer incharge. Square Metre 4360 1258
As directed by engineer incharge. Square Metre 3915 1258
As directed by engineer incharge. Square Metre 3970 800
As directed by engineer incharge. Square Metre 3515 1530
As directed by engineer incharge. Square Metre 4765 1530
As directed by engineer incharge. Square Metre 3825 1530
As Directed by EngneerIn_Charge Square Metre 5186 729

As directed by Engineer incharge. Square Metre 2743 423
As directed by Engineer in charge. Square Metre 3387 170
As directed by Engineer in charge. Square Metre 4960 725

As directed by Engineer in charge. Number 849 204

As directed by Engineer in charge. Square Metre 4227 520
As directed by Engineer in charge. Square Metre 4759 518

As directed by Engineer in charge. Square Metre 3213 556

As directed by Engineer in charge. Square Metre 3590 551

As directed by Engineer in charge. Square Metre 3979 578
As directed by Engineer in charge. Square Metre 4177 575

As directed by engineer incharge. Running Metre 658 100

As directed by engineer incharge. Running Metre 692 208

As directed by engineer incharge. Square Metre 3111 298

As directed by engineer incharge. Square Metre 4114 298
As directed by engineer incharge. Square Metre 1136 112

As directed by engineer incharge. Square Metre 1480 110

As directed by Engineer in charge. Square Metre 535 100

As directed by Engineer in charge. Square Metre 15460 550
As directed by Engineer in charge. Square Metre 12160 500
As directed by Engineer in charge. Square Metre 10150
1870

As directed by Engineer in charge. Square Metre 2470 250

As directed by Engineer in charge. Square Metre 4759 544
As directed by Engineer in charge. Square Metre 2757 220

As directed by Engineer in charge. Square Metre 4211 390

As directed by Engineer in charge. Square Metre 2340 420

As directed by Engineer in charge. Square Metre 1157 48
As directed by Engineer in charge. Square Metre 2591 460

As directed by Engineer in charge. Square Metre 2775 500

As directed by Engineer in charge. Square Metre 2230 315

As directed by Engineer in charge. Square Metre 965 65
As directed by Engineer in charge. Doors and Windows
39.77 BDT

As directed by Engineer Incharge Square Metre 1925 400

As directed by Engineer Incharge Square Metre 2992 300

As directed by Engineer Incharge Square Metre 1550 528
As directed by Engineer Incharge Square Metre 2682 1061

As Directed By Engineer Incharge Doors and Windows
39.82 Bd T
As Directed by Engineer incharge Square Metre 4760 585

As directed by Engineer Incharge Square Metre 3232 429

Bd.T. 63/Page No.514 Square Metre 1583 366
Bd.T. 63/Page No.518 Square Metre 1906 425

Bd.T. 68/Page No.520 Square Metre 1915 425

As directed by Engineer Incharge Cum 63980 10295

As directed by Engineer Incharge Square Metre 527 92

As directed by Engineer Incharge Square Metre 1638 111
As directed by Engineer Incharge Square Metre 326 105

As directed by Engineer Incharge Square Metre 739 91

As directed by Engineer Incharge Rmt 977 50

As directed by Engineer Incharge Rmt 99 50

As directed by Engineer Incharge Square Metre 4228 550

Bd.U.1 Page No. 537 Square Metre 1315 100

Bd.U.1 Page No. 537 Square Metre 1039 102
Bd.U.2 Page No. 537 Square Metre 1995 160

Bd.U.2 Page No. 537 Square Metre 1765 165

As directed by Engineer in charge. Running Metre 745 80

As directed by Engineer Incharge Running Metre 1890 521

As directed by Engineer Incharge Running Metre 4010
1208
As directed by Engineer Incharge Running Metre 3868
1201

As directed by Engineer Incharge Iron Work 40.01 BDW

As directed by Engineer Incharge Square Metre 1615 200
As directed by Engineer Incharge Square Metre 1987 239

41.01 BDV 1 Bd.V.1 Page No. 547

41.02 BDV 1A Bd.V.1 Page No. 547

41.03 BDV 1B Bd.V.1 Page No. 547

41.04 BDV 2 Bd.V.2 Page No. 549
Number 267 28

41.05 BDV 2A Bd.V.2 Page No. 549
Number 323 28

41.06 BDV 2B Bd.V.2 Page No. 549
Number 476 28
41.07 BDV 3 Bd.V.3 Page No. 550
Number 91 17

41.08 BDV 3A Bd.V.3 Page No. 550
Number 96 17

41.09 BDV 3B Bd.V.3 Page No. 550
Number 133 17

41.01 BDV 5 Bd.V.5 Page No. 551

41.11 BDV 5 Bd.V.5 Page No. 551c

41.12 BDV 5 Bd.V.5 Page No. 551

41.13 BDV 5 Bd.V.5 Page No. 551
41.14 BDV 5 Bd.V.5 Page No. 551

41.15 BDV 5 Bd.V.5Page No. 551

41.16 BDV 5 Bd.V.5 Page No. 551

41.17 BDV 5 Bd.V.5 Page No. 551

41.18 BDV 5 Bd.V.5 Page No. 551

Bd.V.5 Page No. 551 Running Metre 230 33
41.20 BDV 5 Bd.V.5 Page No. 551

41.21 BDV 5 Bd.V.5 Page No. 551

41.22 BDV 5 Bd.V.5 Page No. 551

41.23 BDV 5 Bd.V.5 Page No. 551

41.24 BDV 5 Bd.V.5 Page No. 551

41.25 BDV 5 Bd.V.5 Page No. 551
41.26 BDV 7 Bd.V.7 Page No. 554
Number 1938 102

41.27 BDV 7 Bd.V.7 Page No. 554
Number 2532 123

41.28 BDV 7 Bd.V.7 Page No. 554
Number 3523 140

41.29 BDV 7 Bd.V.7 Page No. 554
Number 4365 182

41.30 BDV 7 Bd.V.7 Page No. 554
Number 3524 200

41.31 BDV 7 Bd.V.7 Page No. 554
Number 12855 215

41.32 BDV 7 Bd.V.7 Page No. 554
Number 16552 245
41.33 BDV Bd V 6 Page 553.
Number 3890 455

41.34 BDV Bd V 6 Page 553.
Number 4200 455
41.35 BDV Bd V 6 Page 553.
Number 4560 455

41.36 BDV Bd V 6 Page 553.
Number 5840 455
41.37 BDV Bd V 6 Page 553.
Number 6114 455

41.38 BDV Bd V 6 Page 553.
Number 6677 455
41.39 BDV Bd V 6 Page 553.
Number 13067 460

41.40 BDV 8 Bd.V.8 Page No. 554
Number 201 18

41.41 BDV 8 Bd.V.8 Page No. 554
Number 248 14

41.42 BDV 8 Bd.V.8 Page No. 554
Number 309 22

41.43 BDV 9 Bd.V.9 Page No. 555
Number 220 15

41.44 BDV 9 Bd.V.9 Page No. 555
Number 260 14

41.45 BDV 9 Bd.V.9 Page No. 555
Number 398 24
41.46 BDV 9 Bd.V.9 Page No. 555
Number 368 24

41.47 BDV 9 Bd.V.9 Page No. 555
Number 614 26

41.48 BDV 9 Bd.V.9 Page No. 555
Number 671 33

41.49 BDV 9 Bd.V.9 Page No. 555
Number 840 34

41.50 BDV 9 Bd.V.9 Page No. 555
Number 925 35

41.51 BDV 12 Bd.V. 12 Page No. 556
Number 205 50

41.52 BDV 14 Bd.V.14 Page No. 557
Number 230 24

41.53 BDV 14 Bd.V. 14 Page No. 557
Number 256 30

41.54 BDV As directed by
Engineer incharge.
41.55 BDV As directed by
Engineer incharge.

41.56 BDV 19 Bd. V. 19 Page No. 559

41.57 BDV 23 Bd.V.23 Page No. 562
Number 4700 850

41.58 BDV 23 Bd.V.23 Page No. 562
Number 2300 750

41.59 BDV 23 Bd.V.23 Page No. 562
Number 6753 820
41.60 BDV 26 Bd.V.26 Page No. 564
Number 2200 750

41.61 BDV 27 Bd.V.27 Page No. 564
Number 3242 555

41.62 BDV 29 Bd.V.29 Page No. 565

41.63 BDV 30 Bd.V.30 Page No. 565
Number 2153 208

41.64 BDV 30 Bd.V.30 Page No. 565
Number 2180 208
41.65 BDV 30 Bd.V.30 Page No. 565
Number 2729 390

41.66 BDV 30 Bd.V.30 Page No. 565
Number 2649 349

41.67 BDV 30 Bd.V.30 Page No. 565
Number 2208 590

41.68 BDV BDV. 30 Page No.616
Number NA NA
41.69 BDV BDV. 30 Page No.616
Number 4356 1149

41.70 BDV BDV. 30 Page No.616
Number 4312 1149

41.71 BDV BDV. 30 Page No.616
Number NA NA
41.72 BDV BDV. 30 Page No.616
Number 4436 1149

41.73 BDV BDV. 30 Page No.616
Number NA NA

41.74 BDV 30 Bd.V.30 Page No. 565
Number 2729 390

41.75 BDV 31 Bd.V.31 Page No.566
Number 2666 380
41.76 BDV 31 Bd.V.31 Page No.566
Number 2100 200

41.77 BDV As directed by
Engineer in charge.

41.78 BDV As directed by
Engineer in charge.

41.79 BDV 32 Bd.V.32 Page No.567
Number 572 100

41.80 BDV 32 Bd.V.32 Page No.567
Number 572 100

42.01 BDV 37 Bd.V.37, Page No. 571
42.02 BDV 38 Bd.V.38, Page No. 572
Number 775 135

42.03 BDV 39 Bd.V.39, Page No. 573

42.04 BDV 39 Bd.V.39, Page No. 573

42.05 BDV 39 Bd.V.39, Page No. 573

42.06 BDV 41 Bd.V.41, Page No. 573

42.07 BDV 41 Bd.V.41, Page No. 573

42.08 BDV 41 Bd.V.41, Page No. 573
42.09 BDV 41 Bd.V.41, Page No. 573

42.01 BDV 43 Bd.V.43, Page No. 574
Number 2935 420

42.11 BDV 43 Bd.V.43 Page No. 574
Number 3154 461

42.12 BDV 43 Bd.V.43, Page No. 574
Number 3600 464

42.13 BDV 43 Bd.V.43, Page No. 574
Number 4688 535

42.14 BDV 44 Bd.V.44, Page No. 575
Number 7422 1358
42.15 BDV 44 Bd.V.44, Page No. 575
Number 4060 425

42.16 BDV Bd.V.43 Page No. 574
Number 4050 650

42.17 BDV Bd.V.43 Page No. 574
Number 5700 800

42.18 BDV 45 Bd.V.45, Page No. 575
Number 6985 493

42.19 BDV 46 Bd.V.46, Page No. 576
Number 591 151

42.20 BDV As directed by
Engineer in charge.

42.21 BDV 60 As directed by
Engineer in charge.

42.22 BDV 60 As directed by
Engineer in charge.
42.23 BDV 60 As directed by
Engineer in charge.

42.24 BDV 60 As directed by
Engineer in charge.

42.25 BDV 60 As directed by
Engineer in charge.

42.26 BDV 60 As directed by
Engineer in charge.

42.27 BDV 60 As directed by
Engineer in charge.

42.28 BDV 60 As directed by
Engineer in charge.

42.29 BDV As directed by
Engineer in charge.

42.30 BDV As directed by
Engineer in charge.

42.31 BDV As directed by
Engineer in charge.
42.32 BDV As directed by
Engineer in charge.

42.33 BDV As directed by
Engineer in charge.

42.34 BDV As directed by
Engineer in charge.

42.35 BDV As directed by
Engineer in charge.

42.36 BDV As directed by
Engineer in charge.

42.37 BDV As directed by
Engineer in charge.

42.38 BDV As directed by
Engineer in charge.
42.39 BDV As directed by
Engineer in charge.

42.40 BDV As directed by
Engineer in charge.

42.41 BDV As directed by
Engineer in charge.

42.42 BDV As directed by
Engineer in charge.
42.43 BDV As directed by
Engineer in charge.

42.44 BDV As directed by
Engineer in charge.

42.45 BDV As directed by
Engineer in charge.

42.46 BDV As directed by
Engineer in charge.
42.47 BDV As directed by
Engineer in charge.

42.48 BDV As directed by
Engineer in charge.

42.49 BDV As directed by
Engineer in charge.

42.50 BDV As directed by
Engineer in charge.

42.51 BDV As directed by
Engineer in charge.
42.52 BDV As directed by
Engineer in charge.

42.53 BDV As directed by engineer
incharge.

42.54 BDV As directed by engineer
incharge.

42.55 BDV BD.V 5 page 551
and as directed
by Engineer in charge

42.56 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.57 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.58 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.59 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.60 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge
42.61 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.62 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.63 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.64 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.65 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.66 BDV 5 BD.V 5 page 551
and as directed
by Engineer in charge

42.67 BDV 32 BD.V 32 A page
551 and as directed by
Engineer in charge

42.68 BDV As directed by
Engineer in charge.

42.69 BDV As directed by
Engineer in charge.

42.70 BDV As directed by
Engineer in charge.

42.71 BDV As directed by
Engineer in charge.

42.72 BDV 4 Bd.V. 4 page 551 Number
493 70
42.73 BDV 4 Bd.V. 4 page 551 Number
493 70

42.74 BDV 4 Bd.V. 4 page 551 Number
493 70

42.75 BDV 4 Bd.V. 4 page 551 Number
493 70

42.76 BDV 4 Bd.V. 4 page 551 Number
493 70

42.77 BDV 4 Bd.V. 4 page 551 Number
493 70

42.78 BDV 4 As directed by
Engineer in charge

42.79 BDV As directed by
Engineer in charge

42.80 BDV As directed by
Engineer in charge
42.81 BDV As directed by
Engineer in charge

42.82 BDV As directed by
Engineer in charge

42.83 BDV As directed by
Engineer in charge

42.84 BDV As directed by
Engineer in charge

42.85 BDV As directed by Engineer
Incharge
42.86 BDV As directed by Engineer
Incharge

42.87 BDV As directed by Engineer
Incharge

42.88 BDV As directed by
Engineer in charge

43.01 BDV 5 Bd.V.5 Page No. 551

43.02 BDV 5 Bd.V.5 Page No. 551

43.03 BDV 5 Bd.V.5 Page No. 551
43.04 BDV 5 Bd.V.5 Page No. 551

43.05 BDV 5 Bd.V.5 Page No. 551

43.06 BDV 5 Bd.V.5 Page No. 551

43.07 BDV 5 Bd.V.5 Page No. 551

43.08 BDV 5 Bd.V.5 Page No. 551

43.09 BDV 5 Bd.V.5 Page No. 551
43.10 BDV 5 Bd.V.5 Page No. 551

43.11 BDV 5 Bd.V.5 Page No. 551

43.12 BDV 5 Bd.V.5 Page No. 551

43.13 BDV 5 Bd.V.5 Page No. 551

43.14 BDV 5 Bd.V.5 Page No. 551

43.15 BDV 5 Bd.V.5 Page No. 551

43.16 BDV 5 Bd.V.5 Page No. 551
43.17 BDV 23 Specfications Number
270 70

43.18 BDV 24 Specfications Number
355 175

43.19 BDV 21 Specfications Number
3149 400
43.20 BDV 21 Specfications Number
2477 390

43.21 BDV 22 Specfications Number
3512 390
43.22 BDV 23 Specfications Number
2991 390

43.23 BDV 20 Specfications Number
3922 480

43.24 BDV 22 Specfications Number
1204 210

43.25 BDV 23 Specfications Number 45
4.5
43.26 BDV 23 Specfications Number
111 30

43.27 BDV 23 Specfications Number
3119 340

43.28 Bd V As Directected By
Engineer Incharge
43.29 Bd V As Directected By
Engineer Incharge

43.30 Bd V As Directected By
Engineer Incharge

43.31 Bd V As Directected By
Engineer Incharge
43.32 Bd V As Directected By
Engineer Incharge

43.33 BDV As Directected By
Engineer Incharge

43.34 BDV As Directected By
Engineer Incharge

43.35 BDV As Directected By
Engineer Incharge

43.36 BDV As Directected By
Engineer Incharge

43.37 BDV As Directected By
Engineer Incharge

43.38 BDV As Directected By
Engineer Incharge

43.39 BDV As Directected By
Engineer Incharge
44.01 BDW 2 Bd.W.2 Page No. 582

44.02 BDW 2A Bd.W.2 Page No. 582

44.03 BDW 2B Bd.W.2 Page No. 582

44.04 BDW 2C Bd.W.2 Page No. 582

44.05 BDW 2D Bd.W.2 Page No. 582

44.06 BDW 2E Bd.W.2 Page No. 582

44.07 BDW 2K Bd.W.2 Page No. 582
44.08 BDW 2L Bd.W.2 Page No. 582

44.09 BDW 3 Bd.W.3 Page No. 583

44.10 BDW 6 Bd.W.6 Page No. 585

44.11 BDW 7 Bd.W.7 Page No. 586
Number 7302 215

44.12 BDW 7 Bd.W.7 Page No. 586
Number 809500 214

44.13 BDW Bd. W. 3, Page No. 583
44.14 BDW As directed by
Engineer in charge.

44.15 BDW As directed by
Engineer in charge.

44.16 BDW As directed by
Engineer in charge.

44.17 BDW As directed by
Engineer in charge.

44.18 BDW BDW 1 Page 581 Number
15141 2498
44.19 BDW BDW 1 Page 581
as directed Enginner in
charge

44.20 BDW As directed by
Engineer in charge.

44.21 BDW As directed by
Engineer in charge.

44.22 BDW As directed by
Engineer in charge.

44.23 BDW As directed by
Engineer in charge.

44.24 BDW As directed by
Engineer in charge.
45.01 FIRE.As directed by
Engineering in charge

45.02 FIRE.As directed by
Engineering in charge
45.03 FIRE.As directed by
Engineering in charge

FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge

FIRE.As directed by
Engineering in charge

FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge

FIRE.As directed by
Engineering in charge
FIRE.As directed by
Engineering in charge

Bd.W.8 Page No. 587 Square Metre 41 41

Bd.W.8 Page No. 587 Square Metre 21 20

Bd.W.8 Page No. 587 Number 245 245

Bd.W.8 Page No. 587 Number 272 272

Bd.W.8 Page No. 587 Number 200 200

Bd.W.8 Page No. 587 Square Metre 23 23

BDW 8 9 As directed by
Engineer in charge.

As directed by Engineer in charge. Cubic Metre 117 117

As directed by Engineer in charge. Cubic Metre 129 129
As directed by Engineer in charge. Cubic Metre 117 90

As directed by Engineer in charge. Cubic Metre 162 162

As directed by Engineer in charge. Cubic Metre 297 199

As directed by Engineer in charge Cubic Metre 415 406

As directed by Engineer in charge. Cubic Metre 121 118

As directed by Engineer in charge. Number 61 59

As directed by Engineer in charge. Square Metre 14 14

As directed by Engineer in charge. Square Metre 12 12

As directed by Engineer in charge Square Metre 22 22

As directed by Engineer in charge. Square Metre 22 22

As directed by Engineer in charge. Square Metre 19 13
As directed by Engineer in charge. Square Metre 12 13

As directed by Engineer in charge. Square Metre 6 6

As directed by Engineer in charge. Running Metre 8 8

As directed by Engineer in charge. Running Metre 10 10

As directed by Engineer in charge. Running Metre 9 9

As directed by Engineer in charge. Cubic Metre 615 615

As directed by Engineer in charge. Running Metre 150 70

As directed by Engineer in charge. Running Metre 175 100

As directed by Engineer in charge. Square Metre 34 33

As directed by Engineer in charge. Running Metre 4 4

As directed by Engineer in charge. Square Metre 3 3
As directed by Engineer in charge. Running Metre 6 6

As directed by Engineer in charge. Running Metre 5 5

As directed by Engineer in charge. Square Metre 2.5 2.5

As directed by Engineer in charge Square Metre 4.8 25

As directed by Engineer in charge. Running Metre 1740 124

As directed by Engineer in charge. Number 50 48
As directed by En gineer in charge. Number 105 104

As directed by Engineer in charge. Number 975 975

As directed by Engineer in charge. Square Metre 69 65

Bd.W.3 Page No. 583 Running Metre 445 53

Bd.W.4 Page No. 583 Running Metre 435 60

MORTH 807 Number 294 116 Road Furniture 6.02
MORTH 807
MORTH 807 Number 132 86

MORTH 807 Number 347 94

MORTH 805 Number 400 83

MORTH 805 Number 2175 265

MORTH 805 Number 2468 302

MORTH 202 Number 357 270

MORTH 202 Number 215 159

MORTH 202 Number 44 33

MORTH 805.1 Number 40 16

MORTH 805.1 Number 100 45
MORTH 805.1 Number 4 2

MORTH 801 Number 61 31

MORTH 801 Number 62 32

MORTH 801 Number 10 5

MORTH 801 Number 7 4

MORTH 801 Number 11 8

MORTH 801 Square Meter 112 68
MORTH 801 Square Meter 99 56

MORTH 801 Square Meter 78 50

MORTH 801 Square Meter 83 56
MORTH 806 Number 1720 333
MORTH 806 Number 575 25
MORTH 806 Square Meter 6839 321
MORTH 806 Number 1350 168
MORTH 804 Number 3330 60

MORTH 801 Number 564 125

MORTH 801 Number 860 151
MORTH 806 Number 324 86

MORTH 806 Number 955 13

MORTH 804 Square Meter 5770 25

MORTH 803.4 Square Meter 1196 157
MORTH 801 Number 1049 193

MORTH 801 Number 1049 193

MORTH 801 Number 600 152
MORTH 801 Number 410 122

MORTH 801 Number 250 118

MORTH 805 Number 7800 2600
MORTH 805 Number 9000 3000

MORTH 806 Number 1100 15
MORTH 801 Number 2917 283
MORTH 801 Number 2985 113
MORTH 801 Number 3091 453
MORTH 801 Number 3159 794
MORTH 801 Number 3724 283
MORTH 801 Number 3884 113
MORTH 801 Number 4002 453
MORTH 801 Number 4162 794
MORTH 801 Number 4597 261
MORTH 801 Number 4830 91
MORTH 801 Number 5009 432
MORTH 801 Number 5241 772
MORTH 801 Number 6882 261
MORTH 801 Number 7292 91
MORTH 801 Number 7645 432
MORTH 801 Number 8053 772
MORTH 801 Number 2424 283
MORTH 801 Number 2461 283
MORTH 801 Number 2520 623
MORTH 801 Number 2557 964
MORTH 801 Number 2722 283
MORTH 801 Number 2799 283
MORTH 801 Number 2853 623
MORTH 801 Number 2930 964
MORTH 801 Number 3304 261
MORTH 801 Number 3431 261
MORTH 801 Number 3524 602
MORTH 801 Number 3651 942
MORTH 801 Number 4525 261
MORTH 801 Number 4751 261
MORTH 801 Number 4926 602
MORTH 801 Number 5152 942
MORTH 801 Number 4275 283
MORTH 801 Number 4479 113
MORTH 801 Number 4635 453
MORTH 801 Number 4839 794
MORTH 801 Number 5377 261
MORTH 801 Number 5671 261
MORTH 801 Number 5907 602
MORTH 801 Number 6201 942
MORTH 801 Square Meter 6265 261
MORTH 801 Square Meter 6930 261
MORTH 801 Square Meter 6628 91
MORTH 801 Square Meter 7293 91
MORTH 801 Square Meter 7994 316
MORTH 801 Square Meter 8659 316
MORTH 801 Square Meter 8357 316
MORTH 801 Square Meter 5291 122
MORTH 801 Square Meter 4989 122
MORTH 801 Square Meter 5654 122
MORTH 801 Number 2610 1974

MORTH 805 Number 1301 210
Specification Unit CIR LR 0
DP Number 112 112 1
MORTH.As directed by
Engineer in charge

DP As directed by Cubic Metre 245 245 2

Engineer in charge

DP As directed by Cubic Metre 300 300 3

Engineer in charge

DP Cubic Metre 370 370 4

MORTH.As directed by
Engineer in charge

DP As directed by 425 425 5

Engineer in charge

DP As directed by 475 475 6

Engineer in charge

DP As directed by 530 530 7

Engineer in charge

DP As directed by 1049 5 8
Engineer in charge
DP As directed by 1235 1135 9
Engineer in charge

DP As directed by 627 627 10

Engineer in charge

DP As directed by 759 3060 11

Engineer in charge

DP As directed by 759 759 12

Engineer in charge

DP As directed by 1780 150 13

Engineer in charge

DP As directed by 3910 3070 14

Engineer in charge

DP As directed by 1012 1012 15

Engineer in charge
DP As directed by 380 380 16
Engineer in charge

DP As directed by 7120 2625 17

Engineer in charge

DP As directed by 5240 2425 18

Engineer in charge

DP As directed by 19
Engineer in charge
DP As directed by 20
Engineer in charge
DP As directed by 21
Engineer in charge

DP As directed by 22
Engineer in charge
DP As directed by 23
Engineer in charge

DP As directed by 24
Engineer in charge
DP As directed by 25
Engineer in charge

DP As directed by 26
Engineer in charge

DP As directed by 27
Engineer in charge
DP As directed by 28
Engineer in charge

DP As directed by 29
Engineer in charge

DP As directed by 30
Engineer in charge
DP As directed by 31
Engineer in charge

DP As directed by 32
Engineer in charge

DP As directed by 33
Engineer in charge

DP As directed by 34
Engineer in charge

DP As directed by 35
Engineer in charge
DP As directed by 36
Engineer in charge

DP As directed by 37
Engineer in charge

DP As directed by 38
Engineer in charge
DP As directed by 39
Engineer in charge

DP As directed by 40
Engineer in charge

DP As directed by 41
Engineer in charge
DP As directed by 42
Engineer in charge

DP As directed by 43
Engineer in charge
DP As directed by 44
Engineer in charge

DP As directed by 45
Engineer in charge

DP As directed by 46
Engineer in charge

DP As directed by 47
Engineer in charge
DP As directed by 48
Engineer in charge

DP As directed by 49
Engineer in charge

DP As directed by 50
Engineer in charge

DP As directed by 51
Engineer in charge
DP As directed by 52
Engineer in charge

DP As directed by 53
Engineer in charge

DP As directed by 54
Engineer in charge

DP As directed by 55
Engineer in charge
DP As directed by 56
Engineer in charge

DP As directed by 57
Engineer in charge

DP As directed by 58
Engineer in charge
DP As directed by 59
Engineer in charge

DP As directed by 60
Engineer in charge

DP As directed by 61
Engineer in charge

DP As directed by 62
Engineer in charge
DP As directed by 63
Engineer in charge

DP As directed by 64
Engineer in charge

DP As directed by 65
Engineer in charge

DP As directed by 66
Engineer in charge

DP As directed by 67
Engineer in charge
DP As directed by 68
Engineer in charge

DP As directed by 69
Engineer in charge

DP As directed by 70
Engineer in charge

DP As directed by 71
Engineer in charge

DP As directed by 72
Engineer in charge

DP As directed by 73
Engineer in charge

DP As directed by 74
Engineer in charge

DP As directed by 75
Engineer in charge
DP As directed by 76
Engineer in charge

DP As directed by 77
Engineer in charge

DP MORTH 201 Number 78
141 100

DP MORTH 201 Number 79
200 172
DP MORTH 201 Number 80
500 240

DP MORTH 201 Number 81
600 320

DP MORTH 201 Number 82
1000 1000

DP MORTH 201 Number 83
1400 1400

DP 84

DP MORTH 201 Square 85
Metre 3 3
DP MORTH 201 Square 86
Metre 3 3

DP MORTH 301 Cubic 87
Metre 83 83

DP MORTH 301 Cubic 88
Metre 51 5

DP MORTH 301 Cubic 89
Metre 93 93

DP MORTH 301 Cubic 90
Metre 63 6
DP MORTH 301 Cubic 91
Metre 160 160

DP MORTH 301 Cubic 92
Metre 330 122

DP MORTH 301 Cubic 93
Metre 360 316

DP MORTH 309 Cubic 94
Metre 90 90

DP MORTH 309 Cubic 95
Metre 63 7

DP MORTH 309 Cubic 96
Metre 100 100
DP MORTH 309 Cubic 97
Metre 74 13

DP MORTH 309 Cubic 98
Metre 187 165

DP MORTH 309 Cubic 99
Metre 453 377

DP MORTH 305 Cubic 100
Metre 42 11

DP MORTH 305 Cubic 101
Metre 70 25

DP MORTH 305 Cubic 102
Metre 77 5
DP MORTH 305 Cubic 103
Metre 225 28

DP MORTH 305 Cubic 104
Metre 67 14

DP MORTH 305 Cubic 105
Metre 350 130

DP MORTH 408 Cubic 106
Metre 91 60
DP MORTH 408 Cubic 107
Metre 21 21
DP MORTH 408 Square 108
Metre 4 2

DP MORTH 404 Square 109
Metre 1 1
DP MORTH 501 Square 110
Metre 14 13

DP MORTH 2504 Cubic 111
Metre 114 83

DP MORTH 402 Cubic 112
Metre 552 11

DP MORTH 402 Cubic 113
Metre 695 14

DP MORTH 402 Cubic 114
Metre 509 10
DP Road Sub grade 2.38 115
MORTH 402

DP MORTH 403 Cubic 116
Metre 103 5

DP 3.01 MORTH 401 117

DP 3.02 MORTH 401 118
DP 3.03 MORTH 401 119

DP 3.04 MORTH 401 120

DP 3.05 MORTH 401 121

DP 3.06 MORTH 401 122
DP 3.07 MORTH 403 123

DP 3.08 MORTH 403 124

DP 3.09 MORTH 125
501.8.2.1

DP 3.10 MORTH 202 126
DP 3.11 MORTH 202 127

DP 3.12 MORTH 309.3.7 128

DP 3.13 MORTH 309.3.7 129

DP 3.14 MORTH 404 130

DP 3.15 MORTH 404 131
DP 3.16 MORTH 404 132

DP 3.17 MORTH 404 133

DP 3.18 MORTH 404 134
DP 3.19 MORTH 404 135

DP 3.20 MORTH 404 136

DP 3.21 MORTH 405 137
DP 3.22 MORTH 502 138

DP 3.23 MORTH 406 139

DP 3.24 MORTH 407 140

DP 3.25 MORTH 407 141
DP 3.26 MORTH 407 142

DP 3.27 MORTH 407 143

DP 3.28 MORTH 202 144

DP 3.29 MORTH 502 145

DP 3.30 MORTH 503 146

DP 3.31 MORTH 503 147
DP 3.32 MORTH 503 148

DP 3.33 MORTH 503 149

DP 3.34 MORTH 503 150

DP 3.35 MORTH 151
DP 3.36 MORTH 152

DP 3.37 MORTH 153
DP 3.38 MORTH 154

DP 3.39 MORTH 155
DP 3.40 MORTH 504 156

DP 3.41 MORTH 504 157
DP 3.42 MORTH 504 158

DP 3.43 MORTH 504 159
DP 3.44 MORTH 505 160

DP 3.45 MORTH 505 161
DP 3.46 MORTH 505 162
DP 3.47 MORTH 505 163

DP 3.48 MORTH 507 164
DP 3.49 MORTH 507 165

DP 3.50 MORTH 507 166
DP 3.51 MORTH 507 167

DP 4.01 MORTH 511 168

DP 4.02 MORTH 511 169

DP 4.03 MORTH 511 170
DP 4.04 MORTH 509 171

DP 4.05 MORTH 509 172

DP 4.06 MORTH 509 173

DP 4.07 MORTH 509 174
DP 4.08 MORTH 510 175

DP 4.09 MORTH 510 176
DP 4.10 MORTH 510 177
DP MORTH 602 Cubic 178
Metre 5500 50
DP MORTH 602 Cubic 179
Metre 5600 50
DP MORTH 602 Cubic 180
Metre 5670 50
DP MORTH 602 Cubic 181
Metre 5200 600
DP MORTH 602 Cubic 182
Metre 5300 600
DP MORTH 602 Cubic 183
Metre 5370 600
DP MORTH 602 Cubic 184
Metre 5950 50
DP MORTH 602 Cubic 185
Metre 6040 50
DP MORTH 602 Cubic 186
Metre 6100 50
DP MORTH 602 Cubic 187
Metre 5650 250
DP MORTH 602 Cubic 188
Metre 5740 250
DP MORTH 602 Cubic 189
Metre 5800 250
DP MORTH 601 Cubic 190
Metre 3400 45

DP MORTH 602.2.8 191
Number 190 50

DP MORTH 602.2.8 192
Number 116 45
DP MORTH 602.2.8 193
Number 32 10

DP MORTH 602.6 194
Running Metre 47 23

DP MORTH 602.10.3 195
Running Metre 63 8

DP MORTH 605 Square 196
Metre 10 1
DP MORTH 410.3.6 197
Square Metre 725 100

DP MORTH 410.3.6 198
Square Metre 900 100
DP MORTH Cubic Metre 199
6362 454

DP 7.01 MORTH 409 200

DP 7.02 MORTH 409 201
DP 7.03 MORTH 409 202

DP 7.05 MORTH 409 203

DP 7.06 MORTH 409 204
DP 7.07 MORTH 2703 205

DP 7.08 MORTH 2703 206

DP 7.09 MORTH 2703 207

DP 7.10 MORTH 2703 208
DP 7.11 MORTH 209

DP 7.12 MORTH 210

DP 7.13 MORTH 211
DP 7.14 MORTH 212

DP 7.15 MORTH 213

DP 7.16 MORTH 701 214

DP 7.17 MORTH 701 215

DP 7.18 MORTH 701 216
DP 7.19 MORTH 701 217

DP 7.20 MORTH 701 218

DP 7.21 MORTH 2503 219
DP 7.22 MORTH 2503 220

DP 7.23 MORTH 701 221

DP 7.24 MORTH 701 222

DP 7.25 MORTH 202 223
DP 7.26 MORTH 303 224

DP 7.27 MORTH 408 225

DP 7.28 MORTH 408 226

DP 7.29 MORTH 410 227
DP 7.30 MORTH 811 228

DP 7.31 MORTH 811 229
DP 7.32 MORTH 811 230

DP 7.33 MORTH 801 231
DP 7.34 MORTH 801 232

DP 7.35 MORTH 233
2703/811
DP 7.36 MORTH 2908 69 234
2703/811

DP 7.37 MORTH 2926 70 235

2703/811

DP MORTH 3004 Square 236
Metre 48 48
DP MORTH 3004 Square 237
Metre 35 35

DP MORTH 3002 Cubic 238
Metre 450 108

DP MORTH 3003 Square 239
Metre 103 24

DP MORTH 3003 Square 240
Metre 23 13

DP MORTH 3004 Cubic 241
Metre 7009 1150

DP MORTH 3004 Square 242
Metre 216 42

DP MORTH 3004 Square 243
Metre 241 54
DP MORTH 3004 Square 244
Metre 105 1.5

DP As Directed by 245
Engineer In Charge

DP As Directed by 246
Engineer In Charge

DP As Directed by 247
Engineer In Charge

DP As Directed by 248
Engineer In Charge

DP As Directed by 249
Engineer In Charge

DP As Directed by 250
Engineer In Charge
DP As Directed by 251
Engineer In Charge

DP As Directed by 252
Engineer In Charge

DP As Directed by 253
Engineer In Charge

DP As Directed by 254
Engineer In Charge

DP As Directed by 255
Engineer In Charge

DP As Directed by 256
Engineer In Charge

DP As Directed by 257
Engineer In Charge

DP As Directed by 258
Engineer In Charge
DP As Directed by 259
Engineer In Charge

DP MORTH 514 Square 260
Metre 114 3
DP MORTH 514 Square 261
Metre 108 3

DP MORTH 408 Running 262
Metre 192 27

DP 11.01 CD 1 263

DP 11.02 CD 3A 264

DP 11.03 CD 3A 265
DP 11.04 CD 3B 266

DP 11.05 CD 3B 267

DP 11.06 CD 4 268

DP 11.07 CD 6 269

DP 11.08 CD 7 270

DP 11.09 CD 7 271

DP 11.10 CD 7 272
DP 11.11 CD 7 273

DP 11.12 CD 7 274

DP 11.13 CD 7 275

DP 11.14 CD 7 276

DP 11.15 CD 7 277

DP 11.16 CD 7 278

DP 11.17 CD 7 279

DP 11.18 CD 7 280

DP 11.19 CD 7 281
DP 11.20 CD 7 282

DP 11.21 CD 7 283

DP 11.22 CD 8 284

DP 11.23 CD 8 285

DP 11.24 CD 27 286

DP 11.25 CD 287

DP 11.26 CD 288

DP 11.27 CD 27 289
DP 11.28 CD 290

DP 11.29 CD 291

DP 11.30 CD 292

DP 11.31 CD 293

DP 12.01 BR 3A 294

DP 12.02 BR 3A 295

DP 12.03 BR 3B 296
DP 12.04 BR 3B 297

DP 12.05 BR 3C 298

DP 12.06 BR 3C 299

DP 12.07 BR 3D 300

DP 12.08 BR 3D 301

DP 12.09 BR 3E 302

DP 12.10 BR 3E 303

DP 12.11 BR 3F 304

DP 12.12 BR 3G 305

DP 12.13 BR 3G 306
DP 12.14 BR 4 A 307

DP 12.15 BR 4 A 308

DP 12.16 BR 4 A 309

DP 12.17 BR 4 A 310
DP 12.18 BR 4 A 311

DP 12.19 BR 4 A 312

DP 12.20 BR 4 A 313

DP 12.21 BR 4 A 314
DP 12.22 BR 4 B 315

DP 12.23 BR 4 B 316

DP 12.24 BR 4 B 317

DP 12.25 BR 5A 318
DP 12.26 BR 5A 319

DP 12.27 BR 6 320

DP 12.28 BR 8 321

DP 12.29 BR 9A 322

DP 12.30 BR 9A 323

DP 12.31 BR 10 324
DP 12.32 BR 13A 325

DP 12.33 BR 13A 326

DP 12.34 BR 13A 327

DP 12.35 BR 13A 328

DP 12.36 BR 329
DP 12.37 BR 330

DP 12.38 BR 331

DP 12.39 BR 332

DP 12.40 BR 14 333
DP 12.41 BR 14 334

DP 12.42 BR 14 335
DP 12.43 BR 14 336

DP 12.44 BR 14 337
DP 12.45 BR 14 338

DP 12.46 BR 14 339

DP 12.47 BR 16 340

DP 12.48 BR 16A 341
DP 12.49 BR 17A 342

DP 12.50 BR 17A 343

DP 12.51 BR 17B 344

DP 12.52 BR 17B 345

DP 12.53 BR 346
DP 12.54 BR 347

DP 12.55 BR 59 a 348

DP 12.56 BR 59 a 349

DP 12.57 BR 59 a 350

DP 12.58 BR 59 a 351
DP 12.59 BR 59 a 352

DP 12.60 BR 59 a 353

DP 12.61 BR 354

DP 12.62 BR 355
DP 12.63 BR 356

DP 12.64 BR 357

DP 12.65 BR 358

DP 12.66 BR 359
DP 12.67 BR 360

DP 12.68 BR 361

DP 362

DP 363

DP 364

DP 365

DP 366

DP 367

DP 368

DP 369
DP 370

DP 371

DP 372

DP 373
DP 374

DP 375

DP 376

DP 377
DP 378

DP 379

DP 380
DP 381

DP 382

DP 383
DP 384

DP 385

DP 386

DP 387
DP 388

DP 389

DP 390
DP 391

DP 392

DP 393
DP 394

DP 395

DP 396

DP 397

DP 398
DP 399

DP 400

DP 401

DP 402

DP 403

DP 404
DP 405

DP 406

DP 407

DP 408

DP 409
DP 410

DP 411

DP 412

DP 413
DP 414

DP 415

DP 416

DP 417
DP 418

DP 419

DP 420

DP 421
DP 422

DP 423

DP 424

DP 425

DP 426
DP 427

DP 428

DP 429

DP 430

DP 431
DP 432

DP 433

DP 434

DP 435

DP 436
DP 437

DP 438

DP 439

DP 440

DP 441
DP 442

DP 443

DP 444

DP 445

DP 446
DP 447

DP 448

DP 449

DP 450
DP 451

DP 452

DP 453

DP 454

DP 455
DP 456

DP 457

DP 458
DP 459

DP 460

DP 461

DP 462
DP 463

DP 464

DP 465
DP 466

DP 467

DP 468

DP 469
DP 470

DP 471

DP 472

DP 473
DP 474

DP 475

DP 476

DP 477
DP 478

DP 479

DP 480

DP 481

DP 482
DP 483

DP 484

DP 485
DP 486

DP 487

DP 488

DP 489
DP 490

DP 491

DP 492

DP 493
DP 494

DP 495

DP 496

DP 497
DP 498

DP 499

DP 500

DP 501
DP 502

DP 503

DP 504

DP 505
DP 506

DP 507

DP 508

DP 509

DP 510
DP 511

DP 512

DP 513

DP 514

DP 515
DP 516

DP 517

DP 518
DP 519

DP 520

DP 521
DP 522

DP 523

DP 524

DP 525
DP 526

DP 527

DP 528

DP 529
DP 530

DP 531

DP 532
DP 533

DP 534

DP 535
DP 536

DP 537

DP 538
DP 539

DP 540

DP 541
DP 542

DP 543

DP 544
DP 545

DP 546

DP 547

DP 548
DP 549

DP 550

DP 551

DP 552

DP 553
DP 554

DP 555

DP 556

DP 557

DP 558
DP 559

DP 560

DP 561

DP 562
DP 563

DP 564

DP 565

DP 566
DP 567

DP 568

DP 569

DP 570
DP 571

DP 572

DP 573
DP 574

DP 575

DP 576

DP 577
DP 578

DP 579

DP 580

DP 581
DP 582

DP 583

DP 584
DP 585

DP 586

DP 587

DP 588

DP 589

DP 590

DP 591
DP 592

DP 593

DP 594

DP 595

DP 596

DP 597

DP 22.01 Bd B 598
DP 22.02 Bd B 599

DP 22.03 Bd B 600

DP 22.04 Bd B 601

DP 22.05 Bd B 602
DP 22.06 Bd B 603

DP 22.07 Bd B 604

DP 22.08 Bd B 605

DP 22.09 Bd B 606
DP 22.10 Bd B 607

DP 22.11 Bd B 608

DP 22.12 Bd B 609
DP 22.13 Bd B 610

DP 22.14 Bd B 611

DP 22.15 Bd B 612
DP 22.16 Bd B 613

DP 22.12 Bd B 614

DP 22.13 Bd B 615
DP 22.14 Bd B 616

DP 22.15 Bd B 617

DP 22.16 Bd B 618
DP 22.17 Bd B 619

DP 22.18 Bd B 620

DP 22.19 Bd B 621
DP 22.20 Bd B 622

DP 22.21 Bd/B 4 P270 623

DP 22.22 Bd/B 4 P270 624
DP 22.23 Bd/B 4 P270 625

DP 22.24 Bd/B 4 P270 626

DP 22.25 Bd/B 4 P270 627
DP 22.26 Bd/B 4 P270 628

DP 22.27 Bd/B 4 P270 629

DP 22.28 Bd/B 4 P270 630
DP 22.29 Bd/B 4 P270 631

DP 22.30 Bd/B 4 P270 632

DP 22.31 Bd/B 4 P270 633
DP 22.32 Bd/B 4 P270 634

DP 22.33 Bd/B 4 P270 635

DP 22.34 Bd/B 4 P270 636
DP 22.35 Bd/B 4 P270 637

DP 22.36 Bd/B 4 P270 638

DP 22.37 Bd/B 4 P270 639
DP 22.38 Bd/B 4 P270 640

DP 22.39 Bd/B 2 P269 641

DP 22.40 Bd/B 2 P269 642

DP 22.41 Bd/B 2 P269 643

DP 22.42 Bd/B 2 P269 644
DP 22.43 Bd/B 8 P271 645

DP 22.44 Bd/B 8 P271 646

DP 22.45 Bd/B 8 P271 647

DP 22.46 Bd/B 8 P271 648

DP 22.47 Bd/B 8 P271 649
DP 22.48 Bd/B 8 P271 650

DP 22.49 Bd/B 8 P271 651

DP 22.5 652

DP 22.51 653

DP 22.52 654

DP 22.53 655

DP 22.54 656

DP 22.55 657
DP 22.56 658

DP 22.57 659

DP 22.58 660

DP 22.59 661

DP 22.6 662
DP 22.61 663

DP 22.62 664

DP 22.63 665

DP Bd.C.2 Page No. 275 666
DP Bd.C.3 Page No. 275 667

DP Bd.C.6 Page No. 277 668

DP Bd.C.8 Page No. 278 669
DP As directed by 670
Engineer in charge.

DP As directed by 671
Engineer in charge.

DP B 18 Page No. 78 672
Metric Tonne 74000
9873

DP B.18, Page No 78 673
Centimetre 5 2

DP Spec. No. As directed 674
byEngineer in Charge.
DP Spec.No.: 675
Bd.W.6/Page No.585

DP Spec. No. As directed 676
byEngineer in Charge.

DP Spec. No. As directed 677
byEngineer in Charge.

DP Bd. E. 1 Page No. 287 678
DP Bd. E. 1 Page No. 287 679

DP Spec. No. Bd.E. 680
1 Page No. 287 0 4012
555

DP Bd.E.2 Page No. 681
288 and B.7 Page No 38

DP Bd.E.2 Page No. 682
288 and B.7 Page No 38
DP Bd.E.2 Page No. 683
288 and B.7 Page No 38

DP Bd.E.2 Page No. 684
288 and B.7 Page No 38
DP Bd.E.4 Page No. 685
289 and B 7, Page No.38

DP 686
DP Bd.E.4 Page No. 687
289 and B 7, Page No.38

DP Bd.E.4 Page No. 688
289 and B 7, Page No.38
DP Bd.E.7 Page No 689
291 and B 7 Page No .38

DP 690
DP 691

DP 692
DP 693

DP 694

DP 695

DP 696
DP 25.01 BDF 3 697

DP 25.02 BDF 3 698
DP 25.03 BDF 3 699

DP 25.04 BDF 3 700

DP 25.05 BDF 3 701
DP 25.06 BDF 3 702

DP 25.07 BDF 3 703

DP 25.08 BDF 3 704
DP 25.09 BDF 3 705

DP 25.10 BDF 3 706

DP 25.11 BDF 3 707
DP 25.12 BDF 3 708

DP 25.13 BDF 3 709

DP 25.14 BDF 3 710
DP 25.15 BDF 3 711

DP 25.16 BDF 3 712
DP 25.17 BDF 3 713

DP 25.18 BDF 3 714
DP 25.19 BDF 3 715

DP 25.20 BDF 3 716
DP 25.21 BDF 3 717

DP 25.22 BDF 5 718

DP 25.23 BDF 5 719
DP 25.24 BDF 5 720

DP 25.25 BDF 5 721

DP 25.26 BDF 5 722
DP 25.27 BDF 5 723

DP 25.28 BDF 5 724

DP 25.29 BDF 5 725
DP 25.30 BDF 5 726

DP 25.31 BDF 5 727

DP 25.32 BDF 5 728
DP 25.33 BDF 5 729

DP 25.34 BDF 5 730

DP 25.35 BDF 5 731
DP 25.36 BDF 5 732

DP 25.37 BDF 5 733

DP 25.38 BDF 5 734
DP 25.39 BDF 5 735

DP 25.40 BDF 5 736

DP 25.41 BDF 6 737
DP 25.42 BDF 6 738

DP 25.43 BDF 6 739

DP 25.44 BDF 6 740
DP 25.45 BDF 6 741

DP 25.46 BDF 6 742

DP 25.47 BDF 6 743
DP 25.48 BDF 6 744

DP 25.49 BDF 6 745

DP 25.50 BDF 6 746
DP 25.51 BDF 6 747

DP 25.52 BDF 6 748

DP 25.53 BDF 6 749
DP 25.54 BDF 6 750

DP 25.55 BDF 6 751

DP 25.56 BDF 6 752
DP 25.57 BDF 6 753

DP 25.58 BDF 6 754

DP 25.59 BDF 6 755
DP 25.60 BDF 8 756

DP 25.61 BDF 8 757

DP 25.62 BDF 8 758
DP 25.63 BDF 8 759

DP 25.64 BDF 8 760
DP 25.65 BDF 8 761

DP 25.66 BDF 8 762

DP 25.67 BDF 8 763
DP 25.68 BDF 8 764

DP 25.69 BDF 8 765

DP 25.70 BDF 8 766
DP 25.71 BDF 8 767

DP 25.72 BDF 8 768

DP 25.73 BDF 8 769
DP 25.74 BDF 8 770

DP 25.75 BDF 8 771

DP 25.76 BDF 8 772
DP 25.77 BDF 8 773

DP 25.78 BDF 8 774

DP 25.79 BDF 8 775
DP 26.01 BDF 9 776

DP 26.02 BDF 9 777

DP 26.03 BDF 9 778
DP 26.04 BDF 9 779

DP 26.05 BDF 9 780

DP 26.06 BDF 9 781
DP 26.07 BDF 9 782

DP 26.08 BDF9 783

DP 26.09 BDF10 784

DP 26.10 BDF10 785
DP 26.11 BDF10 786

DP 26.12 BDF10 787

DP 26.13 BDF 11 788

DP 26.14 BDF 11 789
DP 26.15 BDF 11 790

DP 26.16 BDF 11 791

DP 26.17 BDF 11 792
DP 26.18 BDF 11 793

DP 26.19 BDF 11 794

DP 26.20 BDF 11 795
DP 26.21 BDF 12 796

DP 26.22 BDF 12 797
DP 26.23 BDF 12 798

DP 26.24 BDF 12 799
DP 26.25 BDF 13A 800

DP 26.26 BDF 13A 801
DP 26.27 BDF 14A 802

DP 26.28 BDF 14A 803
DP 26.29 BDF 15A 804

DP 26.30 BDF 15A 805
DP 26.31 BDF 16 806

DP 26.32 BDF 16 807
DP 26.33 BDF 17 808

DP 26.34 BDF 17 809

DP 26.35 BDF 17 810
DP 26.36 0 811

DP 26.37 812
DP 26.38 813
DP 26.39 814
DP 26.4 815
DP 26.41 816
DP 26.42 817
DP 26.43 818
DP 26.44 819

DP 26.45 NA 820
DP 26.46 BDF 20 821

DP 26.47 BDF 20 822
DP 26.48 BDF 41 823

DP 26.49 BDF 41 824
DP 26.50 BDF 41 825

DP 26.51 BDF 41 826
DP 26.52 BDF 41 827

DP 26.53 BDF 41 828

DP 26.54 BDF 41 829
DP 26.55 BDF 41 830

DP 26.56 BDF 41 831

DP 26.57 BDF 41 832
DP 26.58 BDF 41 833

DP 26.59 BDF 41 834

DP 26.60 BDF 41 835
DP 26.61 BDF 41 836

DP 26.62 BDF 41 837
DP 26.63 BDF 838

DP 26.64 BDF 839

DP 26.65 BDF 840
DP 26.66 BDF 41 841

DP 26.67 BDF 41 842

DP 26.68 BDF 843
DP 26.69 BDF 3a,b 844

DP 26.70 0 845

DP 26.71 0 846

DP 26.72 0 847
DP 26.73 0 848

DP 26.74 0 849

DP 26.75 0 850

DP 26.76 0 851
DP 26.77 0 852

DP 26.78 BDF 3a,b 853

DP 26.79 BDF 3a,b 854
DP 26.80 BDF 3a,b 855

DP 26.81 BDF 3a,b 856

DP 26.82 BDF 3a,b 857
DP 26.83 BDF 3a,b 858

DP 26.84 BDF 3a,b 859

DP 26.85 BDF 5 860
DP 26.86 BDF 5 861

DP 26.87 BDF 5 862

DP 26.88 BDF 5 863
DP 26.89 BDF 5 864

DP 26.90 BDF 5 865

DP 26.91 BDF 5 866
DP 26.92 BDF 5 867

DP 26.93 BDF 6 868

DP 26.94 BDF 6 869
DP 26.95 BDF 6 870

DP 26.96 BDF 6 871

DP 26.97 BDF 6 872
DP 26.98 BDF 6 873

DP 26.99 BDF 6 874

DP 26.100 BDF 6 875
DP 26.101 BDF 8 876

DP 26.102 BDF 8 877

DP 26.103 BDF 8 878
DP 26.104 BDF 8 879

DP 26.105 BDF 8 880

DP 26.106 BDF 8 881
DP 26.107 BDF 8 882

DP 26.108 BDF 8 883

DP 26.109 BDF 41 884
DP 26.110 BDF 41 885

DP 26.111 BDF 41 886

DP 26.112 BDF 41 887
DP 26.113 BDF 41 888

DP 26.114 BDF 41 889

DP 26.115 BDF 41 890

DP 26.116 BDF 41 891
DP Bd.G. 1 Page No. 313 892

DP Bd.G.2 Page No. 313 893

DP Bd.G.3 Page No. 314 894

DP 0 0 5400 1450 895

DP Bd.G.5 Page No. 315 896
DP Bd.G.7 Page No. 316 897

DP Bd.G.8 Page No. 317 898

DP Bd.G.9 (a) Page 899
No. 317

DP Bd.G.9 (b) Page 900
No. 317

DP Bd.G.10 (a) Page 901
No. 318
DP Bd.G.10 (b) Page 902
No. 318

DP As director by 903
engineer incharge
and BDG 2 & 5

DP As director by 904
engineer incharge
and BDG 2 & 5

DP Bd. G. 7 Page 316 905

DP As directed by 906
engineer in charge
DP As directed by 907
engineer in charge

DP Bd.H.1 Page No. 329 908

DP Bd.H.2 Page No. 329 909

DP Bd.H.3 Page No. 331 910

DP Bd.H.4 Page No. 331 911
DP Bd.H.5 Page No. 331 912

DP Bd.H.6 Page No. 332 913

DP Bd.H.7 Page No. 332 914

DP Bd.H.8 Page No. 332 915

DP Bd. H.11 Page 916
No. 333

DP Bd.H.12 Page No. 333 917
DP Bd.H.13 Page No. 333 918

DP Bd.H.14 Page No. 333 919

DP Bd.H.40 Page No. 345 920

DP Bd.H.15 Page No.334. 921

DP 29.01 BDI 1 922

DP 29.02 BDI 1 923

DP 29.03 BDI 924
DP 29.04 BDI 925

DP 29.05 BDI 926

DP 29.06 BDI 927

DP 29.07 BDI 928
DP 29.08 BDI 929

DP 29.09 BDI 930

DP 29.01 BDI 931

DP 29.11 BDI 932
DP 29.12 BDI 933

DP 29.13 BDI 934

DP Bd.K.1 Page No. 359 935

DP Bd.K.1 Page No. 359 936
DP Bd.K.1 Page No. 359 937

DP Bd.K.1 Page No. 359 938

DP Bd K 1 A Square 939
Metre 4518 960

DP Bd.K.1 B Square 940
Metre 5015 960

DP Bd.K.1 C Square 941
Metre 4495 900

DP Bd.K.1 D Square 942
Metre 4575 900
DP As directed by 943
Engineer in charge

DP As directed by 944
Engineer in charge

DP As directed by 945
Engineer in charge

DP Bd.J.2 Page No. 355 946

DP Bd.J.3 Page No. 356 947
DP As directed by 948
Engineer in charge.

DP As directed by 949
Engineer in charge.
DP As directed by 950
Engineer in charge.

DP As directed by 951
Engineer in charge.

DP As directed by 952
Engineer in charge.

DP As directed by 953
Engineer in charge.
DP As directed by 954
Engineer in charge
DP As directed by 955
Engineer in charge

DP As directed by 956
Engineer in charge
DP Bd.J.2 Page No. 355 957

DP Bd.J.2 Page No. 355 958

DP As directed by 959
Engineer in charge
DP As directed by 960
Engineer in charge.

DP As directed by 961
Engineer in charge.

DP As directed by 962
Engineer in charge
DP As directed by 963
Engineer in charge.
DP As directed by 964
Engineer in charge.
DP As directed by 965
Engineer in charge

DP As directed by 966
Engineer in charge.
DP As directed by 967
Engineer in charge.
DP As directed by 968
Engineer in charge
DP As directed by 969
Engineer in charge.
DP As directed by 970
Engineer in charge.

DP Bd.L.1 Page No. 367 971

DP Bd.L.1 Page No. 367 972

DP Bd. L.2 Page No. 368 973
DP Bd. L.2 Page No. 368 974

DP Bd.L.2 Page No. 368 975

DP Bd.L.4 Page No. 368 976

DP Bd.L.4 Page No. 368 977

DP Bd.L.4 Page No. 368 978

DP Bd.L.5 Page No. 368 979

DP 980
DP Bd.L.7 Page No. 369 981

DP Bd.L.8 Page No. 370 982

DP Bd.L.9, Page No.370 983
DP Spec.No.: As 984
directed by
Engineer incharge.

DP Bd. L.10, Page No.370 985

DP Bd. L.15 Page No. 372 986

DP Bd. L.15 Page No. 372 987

DP Bd. L. 16 Page 988
No. 373

DP Bd. L. 17 Page 989
No. 373

DP Bd. L. 18 Page 990
No. 373

DP As directed by 991
Engineer in charge.
DP As directed by 992
Engineer in charge.

DP As directed by 993
Engineer in charge.

DP As directed by 994
Engineer in charge.

DP As directed by 995
Engineer in charge.

DP As directed by 996
Engineer in Charge:

DP As directed by 997
Engineer in Charge.

DP As directed by 998
Engineer in Charge.
DP As directed by 999
Engineer in Charge.

DP As directed by 1000
Engineer in charge.
DP As directed by 1001
Engineer in charge.

DP As directed by 1002
Engineer in charge.

DP As directed by 1003
Engineer in charge.

DP As directed by 1004
Engineer in charge.
DP As directed by 1005
Engineer in charge.

DP As directed by 1006
Engineer in charge.

DP As directed by 1007
Engineer in charge.

DP 33.01 BDM 1 1008

DP 33.02 BDM 1A 1009

DP 33.03 BDM 1B 1010
DP 33.04 BDM 3 1011

DP 33.05 BDM 3A 1012

DP 33.06 BDM 3B 1013

DP 33.07 BDM 1014

DP 33.08 BDM 1015
DP 33.09 BDM 7 1016

DP 33.01 BDM 7 1017

DP 33.11 BDM 6 1018

DP 33.12 BDM 6 1019
DP 33.13 BDM 7A 1020

DP 33.14 BDM 7A 1021

DP 33.15 BDM 6A 1022

DP 33.16 BDM 6A 1023
DP 33.17 BDM 22 1024

DP 33.18 BDM 22B 1025

DP 33.19 BDM 29B 1026

DP 33.20 BDM 29C 1027

DP 33.21 0 1028

DP 33.22 0 1029
DP 33.23 BDM 15 1030

DP 33.24 BDM 12 1031

DP 33.25 BDM 13 1032

DP 33.26 BDM 13 1033

DP 33.27 BDM 13 1034

DP 33.28 BDM 1035
DP 33.29 BDM 1036

DP 33.30 BDM 1037

DP 33.31 BDM 1038

DP 33.32 BDM 35 1039

DP 33.33 BDM 35 1040

DP 33.34 BDM 3 1041

DP 33.35 BDM 22 1042
DP 33.36 BDM 35 1043

DP 33.37 BDM 35 1044

DP 33.38 BDM 35 1045

DP 33.39 BDM 35 1046

DP 33.40 BDM 12 1047
DP 33.41 BDM 12 1048

DP 33.42 BDM 12 1049

DP 33.43 BDM 12 1050
DP 33.44 BDM 12 1051

DP 33.45 BDM 12 1052

DP 33.46 BDM 12 1053
DP 33.47 BDM 12 1054

DP 33.48 BDM 12 1055

DP 33.49 BDM 1056

DP 33.50 BDM 1057

DP 33.51 BDM 1058
DP 33.52 BDM 1059

DP 33.53 BDM 12 1060

DP 33.54 BDM 1061

DP 33.55 BDM 1062

DP 33.56 BDM 1063
DP 33.57 BDM 1064

DP 33.58 BDM 12 1065

DP 33.59 0 1066

DP 33.60 0 1067
DP 33.61 0 1068

DP 33.62 0 1069

DP 33.63 0 1070

DP 33.64 0 1071
DP 33.65 BDM 12 1072

DP 33.66 BDM 1073

DP 33.67 BDM 1074

DP 33.68 BDM 1075
DP 33.69 BDM 1076

DP 33.70 BDM 1077

DP 33.71 BDM 1078

DP 33.72 BDM 1079

DP 33.73 BDM 1080

DP 33.74 BDM 1081

DP 33.75 BDM 1082
DP 33.76 BDM 1083

DP 33.77 BDM 1084

DP 33.78 BDM 1085

DP 33.79 BDM 1086

DP 33.80 BDM 1087
DP Bd. N. 1. 1 Page 1088
No. 399

DP Bd.N.1.1 Page 1089
No. 399

DP Bd.N.1.2 Page 1090
No. 399

DP Bd. N. 1.2 Page 1091
No. 399

DP Bd.N.1.3 Page 1092
No. 399

DP Bd.N.1.3 Page 1093
No. 399

DP Bd.N.1.4 Page 1094
No. 400

DP Bd.N.1.4 Page 1095
No. 400

DP As directed by 1096
Engineer in charge.

DP As directed by 1097
Engineer in charge.

DP As directed by 1098
Engineer in charge.
DP Bd.O. 1 Page No. 403 1099

DP Bd.0.2 Page No. 404 1100

DP Bd.0.2 Page No. 404 1101

DP Bd.0.3 Page No. 404 1102

DP Bd.O.4 Page No. 405 1103

DP Bd.0.4 Page No. 405 1104
DP Bd.O.5 Page No. 405 1105

DP Bd.0.6 Page No. 406 1106

DP Bd.0.6 Page No. 406 1107

DP Bd.0.7 Page No. 406 1108

DP 0 Square Metre 60 32 1109

DP Bd.O.7 Page No. 406 1110
DP Bd.0.8 Page No. 406 1111

DP As directed by 1112
Engineer incharge.

DP Spec.No.: 1113
Bd.O.8/Page No.406

DP Spec.No.: 1114
Bd.O.8/Page No.406

DP NA NA 1115
DP As directed by 1116
Engineer in charge.

DP As directed by 1117
Engineer in charge.
DP As directed by En 1118
gineer in charge.

DP As directed by 1119
Engineer in charge.

DP As directed by 1120
Engineer in charge.

DP As directed by 1121
Engineer in charge.

DP As directed by 1122
Engineer in charge.

DP As directed by 1123
Engineer in charge.
DP As directed by 1124
Engineer in charge.

DP As directed by 1125
Engineer in charge.

DP As directed by 1126
Engineer in charge.

DP As directed by 1127
Engineer incharge.

DP Bd.P.1 Page No. 411 1128

DP Bd. P. I Page No. 411 1129

DP Bd. P.2 Page No. 412 1130

DP Bd.P.2 Page No. 412 1131
DP Bd.P.3 Page No. 412 1132

DP Bd.P.3 Page No. 412 1133

DP Bd.P.4 Page No. 413 1134

DP Bd. P.4 Page No. 413 1135

DP Bd. P.5 Page No. 413 1136

DP Bd.P.5 Page No. 413 1137

DP Bd.P.6 Page No. 414 1138

DP Bd.P.6 Page No. 1139
414 & Preapproval of
Superintending Engineer
DP Bd.P.6 Page No. 1140
414 & Preapproval of
Superintending Engineer

DP As directed by 1141
Engineer in charge.

DP As directed by 1142
Engineer in charge.

DP As directed by 1143
Engineer in charge.

DP As directed by 1144
Engineer in charge.

DP Bd.Q. 1 Page No. 419 1145

DP Bd.Q.1 Page No. 419 1146

DP Bd.Q.2 Page No. 420 1147

DP Bd.Q.2 Page No. 420 1148
DP Bd.Q.3 Page No. 421 1149

DP Bd.Q.4, Page No. 422 1150

DP Bd.Q.4, Page No. 422 1151

DP Bd.Q.5, Page No. 423 1152

DP Bd.Q.5, Page No. 423 1153

DP Bd.Q.8, Page No. 425 1154

DP Bd/Q 6 P 424 Square 1155
Metre 970 123
DP Bd/Q 6 P 425 Square 1156
Metre 384 133

DP Bd.Q. 18 Page 1157
No. 431

DP As directed by 1158
Engineer incharge.

DP As directed by 1159
Engineer incharge.

DP Bd.Q. 19 Page 1160
No. 432

DP Bd.Q. 19 Page 1161
No. 432

DP Bd.Q.20 Page No. 432 1162
DP Bd.Q.21 Page No. 433 1163

DP Bd.Q.21 Page No. 433 1164

DP As directed by 1165
Engineer in charge.

DP As directed by 1166
Engineer in charge.

DP Bd.Q.22/Page No.434 1167
Rmt. 120 25

DP Bd.Q.22/Page No.434 1168
Rmt. 190 30
DP Bd.N.1.2/Page 1169
No.399 Sq.M. 30 18

DP Bd.R.1, Page No. 449 1170

DP Bd.R.2, Page No. 450 1171

DP Bd.R.3, Page No. 450 1172

DP Bd.R.5, Page No. 453 1173

DP Bd.R.5, Page No. 453 1174
DP Bd. R.7, Page No. 453 1175

DP Bd.R.9, Page No. 455 1176

DP Bd. R. 10, Page 1177
No. 455

DP Bd. R. 10, Page 1178
No. 455

DP Bd. R. 10, Page 1179
No. 455

DP Bd. R. 11, Page 1180
No. 456 Number 332 18

DP Bd. R. 13, Page 1181
No. 459 Number 92 15
DP Bd.R.16, Page 1182
No. 460

DP As directed by 1183
Engineer in charge.
DP As directed by 1184
Engineer in charge.

DP Bd. R. 17 Page 1185
No. 461

DP As directed by 1186
Engineer in charge.
DP Bd. R. 19 Page 1187
No. 462

DP As directed by 1188
Engineer in charge.

DP Bd. R. 17, Page 1189
No. 461
DP Bd. R. 17, Page 1190
No. 461

DP As directed by 1191
Engineer in charge.

DP As directed by 1192
Engineer in charge.

DP As directed by 1193
Engineer in charge.
DP As directed by 1194
Engineer in charge

DP As directed by 1195
Engineer in charge.

DP As directed by 1196
Engineer in charge.

DP As directed by 1197
Engineer in charge.

DP As directed by 1198
Engineer in charge.

DP As directed by 1199
Engineer in charge.
DP As directed by 1200
Engineer in charge.

DP As directed by 1201
Engineer in charge.

DP Bd. R. 3A., Page 1202
No. 449

DP As directed by 1203
Engineer in charge.
DP As directed by 1204
Engineer in charge.
DP As directed by 1205
Engineer in charge.

DP As directed by 1206
Engineer in charge.

DP As directed by 1207
Engineer in charge.
DP As directed by 1208
Engineer in charge.
DP As directed by 1209
Engineer in charge.
DP As directed by 1210
Engineer in charge.
DP As directed by 1211
Engineer in charge.
DP As directed by 1212
Engineer in charge.
DP As directed by 1213
Engineer in charge.
DP As directed by 1214
Engineer in charge.
DP As directed by 1215
Engineer in charge.
DP As directed by 1216
Engineer in charge.
DP As directed by 1217
Engineer in charge.
DP As directed by 1218
Engineer in charge.
DP As directed by 1219
Engineer in charge.

DP As directed by 1220
Engineer in charge.

DP As directed by 1221
Engineer in charge.
DP Bd T 4 Page No. 479 1222

DP Bd T 7 & 8 Page 1223
No. 481 82

DP As directed by 1224
Engineer in charge.
DP As directed by 1225
Engineer in charge.

DP As directed by 1226
Engineer in charge.

DP Bd T 11 & 12, 1227
Page No. 482483
DP Bd T 34, Page No. 499 1228

DP Bd T 36, Page No. 500 1229

DP As directed by 1230
Engineer in charge.

DP Bd T 39, Page No. 500 1231
DP As directed by 1232
Engineer in charge.

DP As directed by 1233
Engineer in charge.

DP Bd T 42, Page No. 503 1234

DP Bd T 42, Page No. 503 1235

DP Bd T 43, Page No. 503 1236

DP Bd T 43, Page No. 503 1237
DP Bd T 53, Page No. 509 1238

DP Bd T 53, Page No. 509 1239

DP As directed by 1240
Engineer in charge.
DP As directed by 1241
Engineer in charge

DP As directed by 1242
Engineer in charge
DP Bd.T.55, Page No. 510 1243
DP Bd.T.55, Page No. 510 1244

DP Bd.T.57, Page No. 511 1245
DP Bd T 67, Page No. 515 1246

DP Bd.S . Page No. 1247
465 to 467

DP Bd. T. 53, Page 1248
No. 509 & As directed by
Engineer in charge.

DP Bd. T. 53, Page 1249
No. 509 and As
directed by Engineer in
charge.

DP As directed by 1250
Engineer in charge.

DP As directed by 1251
Engineer in charge.
DP As directed by 1252
Engineer in charge.

DP As directed by 1253
Engineer in charge

DP As directed by 1254
Engineer in charge.

DP As directed by 1255
Engineer in charge.
DP As directed by 1256
Engineer incharge.
DP As directed by 1257
engineer incharge.
DP As directed by 1258
engineer incharge.
DP As directed by 1259
engineer incharge.
DP As directed by 1260
engineer incharge.
DP As directed by 1261
engineer incharge.
DP As directed by 1262
engineer incharge.
DP As directed by 1263
engineer incharge.
DP As Directed by 1264
EngneerIn_Charge

DP As directed by 1265
Engineer incharge.
DP As directed by 1266
Engineer in charge.
DP As directed by 1267
Engineer in charge.

DP As directed by 1268
Engineer in charge.

DP As directed by 1269
Engineer in charge.
DP As directed by 1270
Engineer in charge.

DP As directed by 1271
Engineer in charge.

DP As directed by 1272
Engineer in charge.

DP As directed by 1273
Engineer in charge.
DP As directed by 1274
Engineer in charge.

DP As directed by 1275
engineer incharge.

DP As directed by 1276
engineer incharge.

DP As directed by 1277
engineer incharge.

DP As directed by 1278
engineer incharge.
DP As directed by 1279
engineer incharge.

DP As directed by 1280
engineer incharge.

DP As directed by 1281
Engineer in charge.

DP As directed by 1282
Engineer in charge.
DP As directed by 1283
Engineer in charge.
DP As directed by 1284
Engineer in charge.

DP As directed by 1285
Engineer in charge.

DP As directed by 1286
Engineer in charge.
DP As directed by 1287
Engineer in charge.

DP As directed by 1288
Engineer in charge.

DP As directed by 1289
Engineer in charge.

DP As directed by 1290
Engineer in charge.
DP As directed by 1291
Engineer in charge.

DP As directed by 1292
Engineer in charge.

DP As directed by 1293
Engineer in charge.

DP As directed by 1294
Engineer in charge.
DP As directed by 1295
Engineer in charge.

DP As directed by 1296
Engineer Incharge

DP As directed by 1297
Engineer Incharge

DP As directed by 1298
Engineer Incharge
DP As directed by 1299
Engineer Incharge

DP As Directed By 1300
Engineer Incharge
DP As Directed by 1301
Engineer incharge

DP As directed by 1302
Engineer Incharge

DP Bd.T. 63/Page No.514 1303
DP Bd.T. 63/Page No.518 1304

DP Bd.T. 68/Page No.520 1305

DP As directed by 1306
Engineer Incharge

DP As directed by 1307
Engineer Incharge

DP As directed by 1308
Engineer Incharge
DP As directed by 1309
Engineer Incharge

DP As directed by 1310
Engineer Incharge

DP As directed by 1311
Engineer Incharge

DP As directed by 1312
Engineer Incharge

DP As directed by 1313
Engineer Incharge

DP Bd.U.1 Page No. 537 1314

DP Bd.U.1 Page No. 537 1315
DP Bd.U.2 Page No. 537 1316

DP Bd.U.2 Page No. 537 1317

DP As directed by 1318
Engineer in charge.

DP As directed by 1319
Engineer Incharge

DP As directed by 1320
Engineer Incharge
DP As directed by 1321
Engineer Incharge

DP As directed by 1322
Engineer Incharge

DP As directed by 1323
Engineer Incharge
DP As directed by 1324
Engineer Incharge

DP 41.01 BDV 1 1325

DP 41.02 BDV 1A 1326

DP 41.03 BDV 1B 1327

DP 41.04 BDV 2 1328

DP 41.05 BDV 2A 1329

DP 41.06 BDV 2B 1330
DP 41.07 BDV 3 1331

DP 41.08 BDV 3A 1332

DP 41.09 BDV 3B 1333

DP 41.01 BDV 5 1334

DP 41.11 BDV 5 1335

DP 41.12 BDV 5 1336

DP 41.13 BDV 5 1337
DP 41.14 BDV 5 1338

DP 41.15 BDV 5 1339

DP 41.16 BDV 5 1340

DP 41.17 BDV 5 1341

DP 41.18 BDV 5 1342

DP Bd.V.5 Page No. 551 1343
DP 41.20 BDV 5 1344

DP 41.21 BDV 5 1345

DP 41.22 BDV 5 1346

DP 41.23 BDV 5 1347

DP 41.24 BDV 5 1348

DP 41.25 BDV 5 1349
DP 41.26 BDV 7 1350

DP 41.27 BDV 7 1351

DP 41.28 BDV 7 1352

DP 41.29 BDV 7 1353

DP 41.30 BDV 7 1354

DP 41.31 BDV 7 1355

DP 41.32 BDV 7 1356
DP 41.33 BDV 1357

DP 41.34 BDV 1358
DP 41.35 BDV 1359

DP 41.36 BDV 1360
DP 41.37 BDV 1361

DP 41.38 BDV 1362
DP 41.39 BDV 1363

DP 41.40 BDV 8 1364

DP 41.41 BDV 8 1365

DP 41.42 BDV 8 1366

DP 41.43 BDV 9 1367

DP 41.44 BDV 9 1368

DP 41.45 BDV 9 1369
DP 41.46 BDV 9 1370

DP 41.47 BDV 9 1371

DP 41.48 BDV 9 1372

DP 41.49 BDV 9 1373

DP 41.50 BDV 9 1374

DP 41.51 BDV 12 1375

DP 41.52 BDV 14 1376

DP 41.53 BDV 14 1377

DP 41.54 BDV 1378
DP 41.55 BDV 1379

DP 41.56 BDV 19 1380

DP 41.57 BDV 23 1381

DP 41.58 BDV 23 1382

DP 41.59 BDV 23 1383
DP 41.60 BDV 26 1384

DP 41.61 BDV 27 1385

DP 41.62 BDV 29 1386

DP 41.63 BDV 30 1387

DP 41.64 BDV 30 1388
DP 41.65 BDV 30 1389

DP 41.66 BDV 30 1390

DP 41.67 BDV 30 1391

DP 41.68 BDV 1392
DP 41.69 BDV 1393

DP 41.70 BDV 1394

DP 41.71 BDV 1395
DP 41.72 BDV 1396

DP 41.73 BDV 1397

DP 41.74 BDV 30 1398

DP 41.75 BDV 31 1399
DP 41.76 BDV 31 1400

DP 41.77 BDV 1401

DP 41.78 BDV 1402

DP 41.79 BDV 32 1403

DP 41.80 BDV 32 1404

DP 42.01 BDV 37 1405
DP 42.02 BDV 38 1406

DP 42.03 BDV 39 1407

DP 42.04 BDV 39 1408

DP 42.05 BDV 39 1409

DP 42.06 BDV 41 1410

DP 42.07 BDV 41 1411

DP 42.08 BDV 41 1412
DP 42.09 BDV 41 1413

DP 42.01 BDV 43 1414

DP 42.11 BDV 43 1415

DP 42.12 BDV 43 1416

DP 42.13 BDV 43 1417

DP 42.14 BDV 44 1418
DP 42.15 BDV 44 1419

DP 42.16 BDV 1420

DP 42.17 BDV 1421

DP 42.18 BDV 45 1422

DP 42.19 BDV 46 1423

DP 42.20 BDV 1424

DP 42.21 BDV 60 1425

DP 42.22 BDV 60 1426
DP 42.23 BDV 60 1427

DP 42.24 BDV 60 1428

DP 42.25 BDV 60 1429

DP 42.26 BDV 60 1430

DP 42.27 BDV 60 1431

DP 42.28 BDV 60 1432

DP 42.29 BDV 1433

DP 42.30 BDV 1434

DP 42.31 BDV 1435
DP 42.32 BDV 1436

DP 42.33 BDV 1437

DP 42.34 BDV 1438

DP 42.35 BDV 1439

DP 42.36 BDV 1440

DP 42.37 BDV 1441

DP 42.38 BDV 1442
DP 42.39 BDV 1443

DP 42.40 BDV 1444

DP 42.41 BDV 1445

DP 42.42 BDV 1446
DP 42.43 BDV 1447

DP 42.44 BDV 1448

DP 42.45 BDV 1449

DP 42.46 BDV 1450
DP 42.47 BDV 1451

DP 42.48 BDV 1452

DP 42.49 BDV 1453

DP 42.50 BDV 1454

DP 42.51 BDV 1455
DP 42.52 BDV 1456

DP 42.53 BDV 1457

DP 42.54 BDV 1458

DP 42.55 BDV 1459

DP 1460
DP 1461
DP 42.56 BDV 5 1462

DP 1463
DP 1464
DP 42.57 BDV 5 1465

DP 42.58 BDV 5 1466

DP 42.59 BDV 5 1467

DP 42.60 BDV 5 1468
DP 42.61 BDV 5 1469

DP 42.62 BDV 5 1470

DP 42.63 BDV 5 1471

DP 42.64 BDV 5 1472

DP 42.65 BDV 5 1473

DP 42.66 BDV 5 1474

DP 42.67 BDV 32 1475

DP 42.68 BDV 1476

DP 42.69 BDV 1477

DP 42.70 BDV 1478

DP 42.71 BDV 1479

DP 42.72 BDV 4 1480
DP 42.73 BDV 4 1481

DP 42.74 BDV 4 1482

DP 42.75 BDV 4 1483

DP 42.76 BDV 4 1484

DP 42.77 BDV 4 1485

DP 42.78 BDV 4 1486

DP 42.79 BDV 1487

DP 42.80 BDV 1488
DP 42.81 BDV 1489

DP 42.82 BDV 1490

DP 42.83 BDV 1491

DP 42.84 BDV 1492

DP 42.85 BDV 1493
DP 42.86 BDV 1494

DP 42.87 BDV 1495

DP 42.88 BDV 1496

DP 43.01 BDV 5 1497

DP 43.02 BDV 5 1498

DP 43.03 BDV 5 1499
DP 43.04 BDV 5 1500

DP 43.05 BDV 5 1501

DP 43.06 BDV 5 1502

DP 43.07 BDV 5 1503

DP 43.08 BDV 5 1504

DP 43.09 BDV 5 1505
DP 43.10 BDV 5 1506

DP 43.11 BDV 5 1507

DP 43.12 BDV 5 1508

DP 43.13 BDV 5 1509

DP 43.14 BDV 5 1510

DP 43.15 BDV 5 1511

DP 43.16 BDV 5 1512
DP 43.17 BDV 23 1513

DP 43.18 BDV 24 1514

DP 43.19 BDV 21 1515
DP 43.20 BDV 21 1516

DP 43.21 BDV 22 1517
DP 43.22 BDV 23 1518

DP 43.23 BDV 20 1519

DP 43.24 BDV 22 1520

DP 43.25 BDV 23 1521
DP 43.26 BDV 23 1522

DP 43.27 BDV 23 1523

DP 43.28 Bd V 1524
DP 43.29 Bd V 1525

DP 43.30 Bd V 1526

DP 43.31 Bd V 1527
DP 43.32 Bd V 1528

DP 43.33 BDV 1529

DP 43.34 BDV 1530

DP 43.35 BDV 1531

DP 43.36 BDV 1532

DP 43.37 BDV 1533

DP 43.38 BDV 1534

DP 43.39 BDV 1535
DP 44.01 BDW 2 1536

DP 44.02 BDW 2A 1537

DP 44.03 BDW 2B 1538

DP 44.04 BDW 2C 1539

DP 44.05 BDW 2D 1540

DP 44.06 BDW 2E 1541

DP 44.07 BDW 2K 1542
DP 44.08 BDW 2L 1543

DP 44.09 BDW 3 1544

DP 44.10 BDW 6 1545

DP 44.11 BDW 7 1546

DP 44.12 BDW 7 1547

DP 44.13 BDW 1548
DP 44.14 BDW 1549

DP 44.15 BDW 1550

DP 44.16 BDW 1551

DP 44.17 BDW 1552

DP 44.18 BDW 1553
DP 44.19 BDW 1554

DP 44.20 BDW 1555

DP 44.21 BDW 1556

DP 44.22 BDW 1557

DP 44.23 BDW 1558

DP 44.24 BDW 1559
DP 45.01 1560

DP 45.02 1561
DP 45.03 1562

DP 1563
DP 1564

DP 1565
DP 1566

DP 1567
DP 1568

DP 1569
DP 1570

DP 1571
DP 1572

DP 1573
DP 1574

DP 1575
DP 1576

DP 1577
DP 1578

DP 1579
DP 1580

DP 1581
DP 1582

DP 1583
DP 1584

DP 1585
DP 1586

DP 1587
DP 1588

DP 1589
DP 1590

DP 1591
DP 1592

DP 1593
DP 1594

DP 1595
DP 1596

DP 1597
DP 1598

DP 1599
DP 1600

DP 1601
DP 1602

DP 1603
DP 1604

DP 1605
DP 1606

DP 1607

DP 1608
DP 1609
DP 1610
DP 1611
DP 1612
DP 1613
DP 1614
DP 1615
DP 1616
DP 1617
DP 1618
DP 1619
DP 1620

DP 1621
DP 1622

DP Bd.W.8 Page No. 587 1623

DP Bd.W.8 Page No. 587 1624

DP Bd.W.8 Page No. 587 1625
Number 245 245

DP Bd.W.8 Page No. 587 1626
Number 272 272

DP Bd.W.8 Page No. 587 1627
Number 200 200

DP Bd.W.8 Page No. 587 1628

DP BDW 8 9 1629

DP As directed by 1630
Engineer in charge.

DP As directed by 1631
Engineer in charge.
DP As directed by 1632
Engineer in charge.

DP As directed by 1633
Engineer in charge.

DP As directed by 1634
Engineer in charge.

DP As directed by 1635
Engineer in charge

DP As directed by 1636
Engineer in charge.
DP As directed by 1637
Engineer in charge.

DP As directed by 1638
Engineer in charge.

DP As directed by 1639
Engineer in charge.

DP As directed by 1640
Engineer in charge.

DP As directed by 1641
Engineer in charge

DP As directed by 1642
Engineer in charge.

DP As directed by 1643
Engineer in charge.
DP As directed by 1644
Engineer in charge.

DP As directed by 1645
Engineer in charge.
DP As directed by 1646
Engineer in charge.

DP As directed by 1647
Engineer in charge.

DP As directed by 1648
Engineer in charge.

DP As directed by 1649
Engineer in charge.
DP As directed by 1650
Engineer in charge.

DP As directed by 1651
Engineer in charge.

DP As directed by 1652
Engineer in charge.

DP As directed by 1653
Engineer in charge.

DP As directed by 1654
Engineer in charge.

DP As directed by 1655
Engineer in charge.

DP As directed by 1656
Engineer in charge.
DP As directed by 1657
Engineer in charge.

DP As directed by 1658
Engineer in charge.

DP As directed by 1659
Engineer in charge.

DP As directed by 1660
Engineer in charge

DP As directed by 1661
Engineer in charge.

DP As directed by 1662
Engineer in charge.
DP As directed by En 1663
gineer in charge.

DP As directed by 1664
Engineer in charge.

DP As directed by 1665
Engineer in charge.

DP Bd.W.3 Page No. 583 1666

DP Bd.W.4 Page No. 583 1667

DP MORTH 807 Number 1668
294 116
DP MORTH 807 Number 1669
132 86

DP MORTH 807 Number 1670
347 94

DP MORTH 805 Number 1671
400 83

DP MORTH 805 Number 1672
2175 265

DP MORTH 805 Number 1673
2468 302

DP MORTH 202 Number 1674
357 270

DP MORTH 202 Number 1675
215 159

DP MORTH 202 Number 1676
44 33

DP MORTH 805.1 1677
Number 40 16

DP MORTH 805.1 1678
Number 100 45
DP 1679

DP MORTH 805.1 1680
Number 4 2

DP MORTH 801 Number 1681
61 31

DP MORTH 801 Number 1682
62 32

DP MORTH 801 Number 1683
10 5

DP MORTH 801 Number 1684
7 4

DP NA 1685

DP MORTH 801 Number 1686
11 8

DP MORTH 801 Square 1687
Meter 112 68
DP MORTH 801 Square 1688
Meter 99 56

DP MORTH 801 Square 1689
Meter 78 50

DP MORTH 801 Square 1690
Meter 83 56
DP MORTH 806 Number 1691
1720 333
DP MORTH 806 Number 1692
575 25
DP MORTH 806 Square 1693
Meter 6839 321
DP MORTH 806 Number 1694
1350 168
DP MORTH 804 Number 1695
3330 60

DP MORTH 801 Number 1696
564 125

DP MORTH 801 Number 1697
860 151

DP 1698
DP MORTH 806 Number 1699
324 86

DP MORTH 806 Number 1700
955 13

DP MORTH 804 Square 1701
Meter 5770 25

DP MORTH 803.4 Square 1702
Meter 1196 157
DP MORTH 801 Number 1703
1049 193

DP MORTH 801 Number 1704
1049 193

DP MORTH 801 Number 1705
600 152
DP MORTH 801 Number 1706
410 122

DP MORTH 801 Number 1707
250 118

DP MORTH 805 Number 1708
7800 2600
DP MORTH 805 Number 1709
9000 3000

DP MORTH 806 Number 1710
1100 15
DP MORTH 801 Number 1711
2917 283
DP MORTH 801 Number 1712
2985 113
DP MORTH 801 Number 1713
3091 453
DP MORTH 801 Number 1714
3159 794
DP MORTH 801 Number 1715
3724 283
DP MORTH 801 Number 1716
3884 113
DP MORTH 801 Number 1717
4002 453
DP MORTH 801 Number 1718
4162 794
DP MORTH 801 Number 1719
4597 261
DP MORTH 801 Number 1720
4830 91
DP MORTH 801 Number 1721
5009 432
DP MORTH 801 Number 1722
5241 772
DP MORTH 801 Number 1723
6882 261
DP MORTH 801 Number 1724
7292 91
DP MORTH 801 Number 1725
7645 432
DP MORTH 801 Number 1726
8053 772
DP MORTH 801 Number 1727
2424 283
DP MORTH 801 Number 1728
2461 283
DP MORTH 801 Number 1729
2520 623
DP MORTH 801 Number 1730
2557 964
DP MORTH 801 Number 1731
2722 283
DP MORTH 801 Number 1732
2799 283
DP MORTH 801 Number 1733
2853 623
DP MORTH 801 Number 1734
2930 964
DP MORTH 801 Number 1735
3304 261
DP MORTH 801 Number 1736
3431 261
DP MORTH 801 Number 1737
3524 602
DP MORTH 801 Number 1738
3651 942
DP MORTH 801 Number 1739
4525 261
DP MORTH 801 Number 1740
4751 261
DP MORTH 801 Number 1741
4926 602
DP MORTH 801 Number 1742
5152 942
DP MORTH 801 Number 1743
4275 283
DP MORTH 801 Number 1744
4479 113
DP MORTH 801 Number 1745
4635 453
DP MORTH 801 Number 1746
4839 794
DP MORTH 801 Number 1747
5377 261
DP MORTH 801 Number 1748
5671 261
DP MORTH 801 Number 1749
5907 602
DP MORTH 801 Number 1750
6201 942
DP MORTH 801 Square 1751
Meter 6265 261
DP MORTH 801 Square 1752
Meter 6930 261
DP MORTH 801 Square 1753
Meter 6628 91
DP MORTH 801 Square 1754
Meter 7293 91
DP MORTH 801 Square 1755
Meter 7994 316
DP MORTH 801 Square 1756
Meter 8659 316
DP MORTH 801 Square 1757
Meter 8357 316
DP MORTH 801 Square 1758
Meter 5291 122
DP MORTH 801 Square 1759
Meter 4989 122
DP MORTH 801 Square 1760
Meter 5654 122
DP MORTH 801 Number 1761
2610 1974

DP MORTH 805 Number 1301 210 1762

1301 210

3070
CI.Rate Labour Rate
Fixing chainage Stone/B.M. Stone/Center Stone/Apex Stone 112.00 112.00
in
earth and all sorts of soil and soft murum including conveyin
g
excavation fixing stone including paintaining lettering numb
ers and back filling etc. complete.

Taking the trial pit for roads, alignment, C.D. Works in earth 245.00 245.00

soil
of all sorts, sands gravel, or soft murum, including stacking t
he
excavated material including all lifts and necessary back fillin
g upto depth 1.5 meters

Taking the trial pit for roads, alignment, C.D. Works in earth 300.00 300.00

soil
of all sorts, sands gravel, or soft murum, including stacking t
he
excavated material including all lifts and necessary back fillin
g upto depth 3.0 meters

Taking the trial pit for roads, alignment, C.D. Works in Hard 370.00 370.00

murum, including stacking the excavated material including
all lifts and necessary back filling upto depth 1.5 meters

Taking the trial pit for roads, alignment, C.D. Works in Hard 425.00 425.00

murum, including stacking the excavated material including
all lifts and necessary back filling upto depth 3.0 meters

Taking the trial pit for roads, alignment, C.D. Works in Hard 475.00 475.00

murum, and Boulders including stacking the excavated mate
rial including all lifts and necessary back filling upto
depth 1.5 meters

Taking the trial pit for roads, alignment, C.D. Works in Hard 530.00 530.00

murum, and Boulders including stacking the excavated mate
rial including all lifts and necessary back filling upto
depth 3.0 meters

Fixing survey pegs in earth and all sorts Soil, Sand, Gravel, So 1049.00 5.00

ft Murum, etc. including conveying, fixing etc. complete.
Reconnaisance Survey of Road alignment in plain 1235.00 1135.00
country
including taking three dimensions of apexes verification of t
ype
of land etc. alongwith the alignment etc. complete (Without
Chaining).

Reconnaisance Survey of Road alignment in plain 627.00 627.00

country
including taking three dimensions of apexes verification of t
ype of land etc. alongwith the alignment etc. complete
(With Chaining).

Reconnaissance Survey of a road alignment for new hilly roa 759.00 3060.00

d
utilising exsisting forest cart tracks with use of ghat tracer (if
found necessary), taking three dimensions of apexes includi
ng
verification of type of land etc. complete. (Without Chaining
)

Reconnaissance Survey of road alignment for new hilly road 759.00 759.00

utilising exsisting forest cart tracks with use of ghat tracer (if
found necessary), taking three dimensions of apexes includi
ng verification of type of land etc. complete. (With Chaining)

Reconnaissance Survey of road alignment in hilly road utilisi 1780.00 150.00

ng
exsisting forest cart tracks with use of ghat tracer (if found
necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (Without Chaining
) .

Reconnaissance Survey of road alignment in hilly road utilisi 3910.00 3070.00

ng
existing forest cart 1.5 kms with use of ghat tracer (if found
necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (With Chaining) .

Detailed survey of road in plain country including chaining a 1012.00 1012.00

nd
levelling with cross sections at every two chains inclusive of
closing of survey each day.
Detailed survey of road length where earthwork is partly do 380.00 380.00
ne
including chaining and levelling with cross sections at every t
wo inclusive of closing survey each day.

Detailed survey of road through hilly country taking 7120.00 2625.00

cross section at every chains or as required including
chaining , levelling and closing survey each day.

Detailed survey of road through hilly country taking 5240.00 2425.00

cross section  at  every  chains  as  per  desired  including
chaining ,levelling  and  closing  survey  each  day  utilising
existing  cart track.

Providing and Fixing Wooden survey pegs including 0.00 0.00

White washing etc. complete.
Carrying out catchment area traverse survey of minor stream 0.00 0.00
( not traceable in toposheet ) below 100 acres
Road Survey and DPR 1.21 MORTH Cutting down branches 0.00 0.00
of trees , bushes etc. stacking the
material neatly as directed ( For Motarable Road)

Providing detailed layout plan of area in scale 1:500 includin 0.00 0.00

g
carrying out contour survey & detailed Engineering plane ta
ble
Survey with the help of 20''. The dolomite area measuremen
t of
the plot and structures, trees, over head line and under grou
nd
service amenities within the area, with triagular method and
giving detailes of the structures, such as total area, type of
building  &  distance  from  all  corners  taking  trial  pit
0.5x0.5x2.00 m. 2Nos. per acre and collection of record from
city survey / D.I.L.R. authorities and authentication. The plan
shall  be  traced  on  75  micron  polyster  film  and  shall  be
submitted along with three Amonia prints. The contour level
s shall  be  marked  at  0.5.  Meter  intervals.  Note:   The
items
includes  1)Traversing work with theodolite and steel tape. 2)
Levelling  Grid  Work  of  the  terrain.  3)Detailed
Engineering
Survey and contouring work of the terrain. 4)Plotting work.
5)Collection of Record. a) up to 1 Acre
Providing detailed layout plan of area in scale 1:500 includin 0.00 0.00
g
carrying out contour survey & detailed Engineering plane ta
ble
Survey with the help of 20''. The dolomite area measuremen
t of
the plot and structures, trees, over head line and under grou
nd
service amenities within the area, with triagular method and
giving detailes of the structures, such as total area, type of
building  &  distance  from  all  corners  taking  trial  pit
0.5x0.5x2.00 m. 2Nos. per acre and collection of record from
city survey / D.I.L.R. authorities and authentication. The plan
shall  be  traced  on  75  micron  polyster  film  and  shall  be
submitted along with three Amonia prints. The contour level
s shall  be  marked  at  0.5.  Meter  intervals.  Note:   The
items
includes  1)Traversing work with theodolite and steel tape. 2)
Levelling  Grid  Work  of  the  terrain.  3)Detailed
Engineering
Survey and contouring work of the terrain. 4)Plotting work.
5)Collection of Record. b) Above Acre

Reconnaisance survey including study of sheets,maps etc. fo 0.00 0.00

r
alignment including 3 dimension of appexes, fixing pegs,chai
n and  compass  or  cross  staff  survey  with  L Section  and
cross section  of  alignment  at  every  30  m  or  at  every
change  of
indiviation which ever is less including fly levels at close of
days,fixing apex and B.M. stones of size 0.20*0.20*0.75 m in
1:2:4 C.C. at every 200 m and preparation of alignment plans
and all type of compliance if required from department.
Preparation of detailed Plans and Estimates Of road includin 0.00 0.00
g
typing in 5 copies, ammonia prints, with colouring of plans,
proper filing, indexing and paging etc. complete and all type
s of compliance, if required from Department.

Survey of C.D. works including taking L section of Road, 0.00 0.00

catchment area plan by Traverse method and taking and trial
pits  of  size  1.00  Mx1.00Mx1.50M  including  preparation
of detailed  Plans  and  Estimates  in  5  copies  and  all
types  of compliance if required from the Department.

Survey of Minor bridge including taking L section of existing 0.00 0.00

road two defined cross sections one of U/s and one of D/s o
ne
vergin cross section on allernate proposed cross section and
stream upto sufficient long with chain and compass taking th
ree
trial pits of size 1.00 x 1.00x3.0 m collecting samples of bed
materials at size for ascertaining the silt factor unit test speci
fic
gravity from Govt. approved labouratories and preparation o
f detailed  survey  data  submission  of  the  porject  duly
typed
colouring of the ammonia prints site pland and other drawin
g etc. complete if required form the Dpartment.
Survey of major bridge including taking L section of existing 0.00 0.00
road two defined (one at U/S and one at D/s)one alternate
proposed cross section stream upto sufficient length with ch
ain
and compass taking 5 trial pits three in bed two on banks of
size  2.00x2.00x3.00m.for  collecting  samples  at  site  for
ascertaining the laboratories ( testing charges to be borne by
the agency) and preparation of detailed survey data,submiss
ion
of the project duly typed colouring of ammonia prints,site pl
an
and other drawings etc.complete and all types of complianc
e if required  from  Department  (Excluding  taking  trial
bores  and contouring)

Contour Survey of stream U/S and D/S of proposed bridge si 0.00 0.00

te
including levelling at every 30 X 30 m preparing contour map
with Autocad prints etc.complete in 5 sets.

Survey of raised Causeway including reconnaissance taking L 0.00 0.00

section of existing road one defined one vergin one alternate
proposed cross section and stream upto sufficient lengths wi
th chain and compass taking two trial pits of size
2.00x2.00x3.00m.collecting samples at site ascertaining
silt
factor and preparation of detailed survey data,submission of
the
project duly typed colouring of the ammonia prints,site plan
and other drawing etc.complete if required from Deparetme
nt.
Preparation of detailed plans and estimates of Raise Causew 0.00 0.00
ayon
the basis of the approved detailed survey data by competent
authority including typing in 5 copies ammonia prints site pl
an
other drawings with colouring of plans proper filling indexin
g
and paging etc.complete and all types of compliance if requi
red from Department.

Complete survey of stream having catchment area upto 1 sq. 0.00 0.00

mile including catchment survey taking necessary L.S./C.S. a
nd other details etc. complete.

Complete survey of stream having catchment area above 1 s 0.00 0.00

q.
Mile and upto 5 sq. Miles including taking necessary L.S./C.S
. and other details etc. complete.

Reconnaissance survey of alignment in plain country for 0.00 0.00

approaches to the bridge including taking three dimensions
of apexes. ( Without chaining )

Fly levelling for carrying out bench mark. 0.00 0.00

Detailed survey of approaches including Chain and 0.00 0.00

Compass survey along bridge alignment and approaches
including closing each day work.

Taking longitudinal section of streams extending upstream a 0.00 0.00

nd
downstream side of the bridge site, requisite number of cros
s
section of the stream on either sides block contouring and o
ther
details etc. complete. ( Length of L.S. and C.S. for contouring
to be worked out )

Demarcation of right of way (ROW) as per design using total 0.00 0.00

station including calculation of co
ordinates of 30 Meter interval on both sides of road.
Preparation of Land Acquisition proposal including collection 0.00 0.00
of
7/12 and 8/A documents marking alignment and village map
s ,
area calculation, preparation of proposal, printing,binding, e
tc. complete and submission of 5 sets more ever liasoning
and
coordination with revenue authorities with compliance if an
y
until finalisation of award including Joint measurement of th
e alignment. For new alignment.

Preparation of Land Acquisition proposal including collection 0.00 0.00

of
7/12 and 8/A documents marking alignment and village map
s ,
area calculation, preparation of proposal, printing,bindind, e
tc. complete and submission of 5 sets more ever liasoning
and
coordination with revenue authorities with compliance if an
y
until finalisation of award including Joint measurement of th
e alignment. For existing alignment.

Carrying of detailed topographic survey by using total statio 0.00 0.00

n along the existing or new road including taking L
section and
cross section at every 30 meter Row ,taking at least 10 spot
levels per cross section, picking up all existing details inside t
he
Row like electric telephone line , encroachments, structures
etc. connecting  all  the  primary  total  station  control
points  by
G.I.S.Bench marks level or whichever available with departm
ent
using auto level and preparing Auto CAD plan by using abov
e
data taking out 1 set of black and white printout on 50 micro
n
polyster film sheet A2 size and 2 sets of coloured printout on
A2
size submitting soft copy all data on CD. Plain Terrain New
Alignment
Carrying of detailed topographic survey by using total statio 0.00 0.00
n along the existing or new road including taking L
section and
cross section at every 30 meter Row ,taking at least 10 spot
levels per cross section, picking up all existing details inside t
he
Row like electric telephone line , encroachments, structures
etc. connecting  all  the  primary  total  station  control
points  by
G.I.S.Bench marks level or whichever available with departm
ent
using auto level and preparing Auto CAD plan by using abov
e
data taking out 1 set of black and white printout on 50 micro
n
polyster film sheet A2 size and 2 sets of coloured printout on
A2
size submitting soft copy all data on CD. Plain Terrain Existing
Alignment.

cCarrying of detailed topographic survey by using total statio 0.00 0.00

Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia 0.00 0.00

over burden ( by diamond drilling machine ) such as soil of al
l
sorts, soft murum,hard murum and boulders and in soft rock
including all materials such as casing pipes and accessories o
il, grease, steel, rods, and such other materials as
required
(including conveying the material to site of work) . Preservin
g
the loose sample in glass jar and core sample serially on site
of
work and conveying the same to HQ of concernring office as
directed. R.A.for 10.00 Rmt a) over burden 0 to 50 meter.

Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia 0.00 0.00

in  rocks  as  specified  below  including  all  necessary
materials such  as  oil,grease,steel  boostan  and  such  other
materials  as
required (including conveying the material to site of work) a
nd
Preserving the core sample core sample serially on site of w
ork and  conveying  the  same  to  HQ  of  concernring  office
as
directed. Quartzite with diamond drill with Ax Bit 0 to 50 me
tre
Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia 0.00 0.00
in  rocks  as  specified  below  including  all  necessary
materials such  as  oil,grease,steel  boostan  and  such  other
materials  as
required (including conveying the material to site of work) a
nd
Preserving the core sample core sample serially on site of w
ork and  conveying  the  same  to  HQ  of  concernring  office
as directed. Other Rock with diamond drill. 0 to 50 metre

Providing tun tappa core boxes of jungle wood of size1.25mx 0.00 0.00

0.35x 0.15m for preserving core sample with all fixtures and
fastening handles including locking arrangment etc . complet
e.

Providing and maintaining temparory platform of bore locati 0.00 0.00

on
in river bed in upto 1M of standing water of size 3.50 x 4.00
M
by using sand bags in layer for platform including all require
d materials labours etc. complete.

Providing and maintaining temporary platform for 0.00 0.00

erecting
boring machined in river bed to the depth of standing water
1M
to 2M of size 3.50 x 4.00 M by using 20 Nos. of M.S. empty
barrels in M.S. frame made upto M.S. angle size 50 x 50 x 5
mm with fabrication and over it a jungle wood planks platfor
m
of size 3.50 x 4.00 x 0.03 M size including supplying of nylon
rope  24  mm  size  for  anchoring  platform  include  passage
platform and enganging a labour etc. complete. 1 M to 2 M.
Providing  and  maintaining  temparory  platform  for   0.00 0.00
erecting
boring machined in river bed to the depth of standing water
1M
to 2M of size 3.50 x 4.00 M by using 20 Nos. of M.S. empty
barrels in M.S. frame made upto M.S. angle size 50 x 50 x 5
mm with fabrication and over it a jungle wood planks platfor
m
of size 3.50 x 4.00 x 0.03 M size including supplying of nylon
rope  24  mm  size  for  anchoring  platform  include  passage
platform  and  enganging  a  labour  etc.  complete.  2  M
and Above.

Providing and maintaining temparory platform for 0.00 0.00

inspection
from one bank to another bank of bore location in river bed
in
all depth of standing water of size 1.30 x 2.00 M by using 4
Nos. of M.S. empty barrels in M.S. frame made up of M.S. an
gle
size 50 x 50 x 5 mm with fabrication and over it a jungle woo
d planks platform of size 1.30 x 2.00 x 0.03 M size including
supplying of nylon rope 24 mm size and 300 M length
of
movement of platform enganging a labour on inspection day
s etc. complete.

Conveying the boring machine and engine and all its 0.00 0.00

accessories  etc.  to  the  site  of  the  work  and  back
including loading  unloading  etc.  complete.  Rate
mechanical  (  Note
Distance to be measured from the station of boring machine
engine etc. of district head quarters to site of the work by sh
ort route ).

Shifting boring plant with all its components and reinstalling 0.00 0.00

the same at the directed place including all its charges etc.
complete.
Providing detailed reports of the inspection logging of drille 0.00 0.00
d hole by observing visual description of data as per
depth,
thickness of layer, type of sample, wash sample, bore recove
ry type of drill etc. complete.

Providing detailed geological reports of proposed site by 0.00 0.00

maintaining geotechnical investigation of structure stratifica
tion
collecting soil, rock and ground water samples for laboratory
tests to arrive the foundation design parameters . Rock
properties such as type of rock, jointing fractures, etc. compl
ete with suggestion about the site foundation and remedies.

Preparing land plans and land schedule including carrying ou 0.00 0.00

t
plane table survey for Private / Forest land on both side of r
oad
in Rural and Urban areas. The work of plotting and certificat
e from  T.I.L.R.  or  other  authorities  shall  be  obtained
from
correctness of prepared plans. Tracing ang taking out prints
and
preparing the requisite booklets duly bounds and printing wi
th
all materials etc. Three land plan booklets along with origina
l
tracing shall be supplied including procurement of village ma
ps / forest land plans from concern authorities.Note : The ite
m
plane table includes following points 1 ) Carrying out plane
table survey. 2) Plotting of duly surveyed area . 3) Collection
of
data from D.I.L.R. authorities and verification of survey maps
by
D.I.L.R. authorities . 4) Preparing three booklets of survey m
aps including  taking  out  prints  of  survey  maps,  binding
etc.  5)
Carrying out plane table survey of the Private / Forest land
along the road upto 30 meters on either side from the road
centre.
Geometrical  design  of  road  horizontal  and  vertical   0.00 0.00
curves  at
design speed specified by IRC including carrying out trail for
optimising  of  civil  cost  minimising  land  acquisition  and
maximum use of existing facility and preparation of widenin
g
arrangement drawing for insisting structures stake out date f
or horizontal  alignment  and  working  levels  including
super elevation effect etc. complete.

Transfering and taking out design on coordinates of baseline 0.00 0.00

on
ground using nails for exsisting road surfaces and survey peg
s for new alignments including taking out coordinates for
horizontal curves at required interval of 50 meters etc.
complete. ( Extra line such as right of way median edges to t
oe line not included).

Preparation of roadway, drawing (Plan And Profile ) on 0.00 0.00

computerising Autocad at required scale showing all
topo
feature and proposed construction details such as carriage w
ay ,
median service road, toe line, retaining walls, cross drainage
works, major structures, etc. complete. Including indexing, l
evel
tables, legend, basic information of project and design detail
s etc.

Preparation of Engineering drawing as strip plan, 0.00 0.00

widening
scheme, index / key map, typical cross section, retaining wall
s,
road furniture, general arrangement drawings for bus bays /
truck lay bays / rest areas / toll plaza / booths / and
type
drawing of pipe/ slab drains etc. on computer using Auto CA
D.
Survey of C.D. works including taking L Section of road, 0.00 0.00
catchment area plan by Traverse method and taking trial pits
of
size 1.50M x 1.50M x 1.50M including preparation of detaile
d
plans and estimates in 5 copies and all types of compliance if
required from the department.

Design of junctions including detail layout of traffic 0.00 0.00

signs, informatory boards traffic islands. Breaks in
median verge
including working levels at junctions as per IRC standards etc
. complete. a) Major Junction

Design of junctions including detail layout of traffic 0.00 0.00

signs, informatory boards traffic islands. Breaks in
median verge
including working levels at junctions as per IRC standards etc
. complete. b) Minor Junction

Preparaion of initial design of flyovers with preparing Gener 0.00 0.00

al Arrangement drawing with dimensions etc. complete
and
preparation of rough estimate for all components of bridge.
Including supplying four copies of coloured drawings and co
py of drawing on C.D. ( excluding geotechnical and
structural design part.)

Preparation of draft / Final Report comprising of 0.00 0.00

technical,
financial economic feasibility and environmental aspects of t
he
project including executive summary and detailed chapters o
n
necessity and introduction of project existing and future tra
ffic,
design philosophy scope of work, summary of available cost
estimates  justification  for  rates  adopted,  key  points  of
execution, salient features of the project, location of toll plaz
a, toll  rate  /  policy  to  be  adopted  and  specification  of
major
construction items etc. in 8 copies having attractive cover an
d binding s directed by engineer in charge etc. complete.
Preparation of Autocad drawing with colour print for Buildin 0.00 0.00
g /
Bridge / Road/ CD Works in required size etc. complete.   A 0
Size

Preparation of Autocad drawing with colour print for Buildin 0.00 0.00

g / Bridge / Road/ CD Works in required size etc. complete. A
1 Size

Preparation of Autocad drawing with colour print for Buildin 0.00 0.00

g / Bridge / Road/ CD Works in required size etc. complete. A
2 Size

Autocad drawing with colour print out for Building / Bridge / 0.00 0.00

Road/ CD Works in required size etc. complete. A 0 Size

Road Survey and DPR 1.72 MORTH 0.00 0.00

Autocad drawing with colour print out for Building / Bridge /
Road/ CD Works in required size etc. complete. A 1 Size

Road Survey and DPR 1.73 MORTH 0.00 0.00

Autocad drawing with colour print out for Building / Bridge /
Road/ CD Works in required size etc. complete. A 2 Size

Road Survey and DPR 1.74 MORTH 0.00 0.00

Autocad drawing with colour print out for Building / Bridge /
Road/ CD Works in required size etc. complete. A 3 Size

Road Survey and DPR 1.75 MORTH 0.00 0.00

Autocad drawing with colour print out for Building / Bridge /
Road/ CD Works in required size etc. complete. A 4 Size
Deploying Automated Traffic Count & classification system o 0.00 0.00
n
Road ( Two Lane) in both direction at designated traffic coun
t post  by  using  High  Definition  Cameras..Collecting  the
Non Editable  Data  In  DVR  System  with  necessary
electronic  and electrical  arrangements  or  inventor  of
required  capacity
Classification of data as per vehicle category as required wit
h the  help  of  software  and  submitting  the  the  reports
to  the
concerned department in hard copies as well as in soft copy,
including using necessary technical manpower etc. complete
. A) Up to 7 Days (Two Lane)

Deploying Automated Traffic Count & classification system o 0.00 0.00

n
Road ( One Lane) in both direction at designated traffic coun
t post  by  using  High  Definition  Cameras..Collecting  the
Non Editable  Data  In  DVR  System  with  necessary
electronic  and electrical  arrangements  or  inventor  of
required  capacity
Classification of data as per vehicle category as required wit
h the  help  of  software  and  submitting  the  the  reports
to  the
concerned department in hard copies as well as in soft copy,
including using necessary technical manpower etc. complete
. B) Extra charges for every additional lane (If required)

Cutting down trees including trunks and branches with girth 0.00 0.00

s
above 30cm to 60cm and stacking the materials neatly with
all lifts and lead of 1000m. as directed and earth filling in the
depression/pit if any.

Cutting down trees including trunks and branches with girth 0.00 0.00

s
above 60cm to 90cm and stacking the materials neatly with
all lifts and lead of 1000m. as directed and earth filling in the
depression/pit if any.
Cutting down trees including trunks and branches with girth 0.00 0.00
s
above 90cm to 180cm and stacking the materials neatly with
all
lifts and lead of 1000m. as directed and earth filling in the
depression/pit if any.

Cutting down trees including trunks and branches with girth 0.00 0.00

s
above 180cm to 270cm and stacking the materials neatly wit
h
all lifts and lead of 1000m. as directed and earth filling in the
depression/pit if any.

Cutting down trees including trunks and branches with girth 0.00 0.00

s
above 270cm to 450cm and stacking the materials neatly wit
h
all lifts and lead of 1000m. as directed and earth filling in the
depression/pit if any.

Cutting down trees including trunks and branches with girth 0.00 0.00

s
above 450cm and stacking the materials neatly with all lifts
and lead of 1000m. as directed and earth filling in the
depression/pit if any.

Clearing grass and removal of rubbish up to a distance of 50 0.00 0.00

metres outside the periphery of the area . MORTH 201
Square Metre 4 4

Clearing and grubbing road land including uprooting 0.00 0.00

rank
vegetation, grass, bushes, shrubs, saplings and trees girth up
to
300 mm, removal of stumps of trees cut earlier and disposal
of
unserviceable materials and stacking of serviceable material
to
be used or auctioned up to a lead of 1000 metres including
removal and disposal of top organic soil not exceeding 150
mm in thickness. BY Manual Means
Clearing and grubbing road land including uprooting 0.00 0.00
rank
vegetation, grass, bushes, shrubs, saplings and trees girth up
to
300 mm, removal of stumps of trees cut earlier and disposal
of
unserviceable materials and stacking of serviceable material
to
be used or auctioned up to a lead of 1000 metres including
removal and disposal of top organic soil not exceeding 150
mm in thickness. By Mechanical Means

Excavation for roadway in earth, soil of all sorts, sand, gravel 0.00 0.00

or
soft murum including dressing section to the required grade,
camber and side slopes and conveying the excavated materi
als
with all lifts upto a lead of 50m. and spreading for embankm
ent or stacking as directed. By Manual Means

Excavation for roadway in earth, soil of all sorts, sand, gravel 0.00 0.00

Excavation for roadway in hard murum including 0.00 0.00

dressing section to the required grade, camber and side
slopes and
conveying the excavated materials with all lifts upto a lead o
f
50m.and spreading for embankment or stacking as directed.
By Mechanical Means.
Excavation for roadway in soft rock, including dressing sectio 0.00 0.00
n
to the required grade, camber and side slopes and conveying
the excavated materials with all lifts upto a lead of 50m. and
spreading or stacking as directed. By mechanical means

Excavation for roadway in hard rock by controlled 0.00 0.00

blasting
including dressing section to the required grade, camber and
side slopes and conveying the excavated materials with all li
fts
upto a lead of 50m. and spreading for embankment or stocki
ng as directed.

Excavation for roadway in hard rock by wedging & chiselling 0.00 0.00

or
line drilling including dressing section to the required grade,
camber and side slopes and conveying the excavated materi
als
with all lifts upto a lead of 50m. and spreading for embankm
ent or stacking as directed.

Excavation for catch / side water gutter in all sorts of soils to 0.00 0.00

the specified section including stacking the excavated stuff in
a regular bund and disposing of unsuitable or excess stuff as
directed By Manual Means.

Excavation for catch / side water gutter in all sorts of soils to 0.00 0.00

the specified section including stacking the excavated stuff in
a regular bund and disposing of unsuitable or excess stuff as
directed all sorts of soils. By Mechanical Means

Excavation for catch / side water gutter in Hard murum strat 0.00 0.00

a to
the specified section including stacking the excavated stuff in
a regular bund and disposing of unsuitable or excess stuff as
directed. By Manual Means.
Excavation for catch / side water gutter in Hard murum strat 0.00 0.00
a to
the specified section including stacking the excavated stuff in
a regular bund and disposing of unsuitable or excess stuff as
directed.By Mechanical Means

Excavation for catch / side water gutter in Soft rock strata to 0.00 0.00

the specified section including stacking the excavated stuff in
a regular bund and disposing of unsuitable or excess stuff as
directed. by Mechanical Means

Excavation for catch / side water gutters in Hard rock strata t 0.00 0.00

o
the specified section including stacking the excavated stuff in
a regular bund by chiselling and wedging and disposing
of unsuitable or excess stuff as directed.

Watering & compacting of embankment formed of 0.00 0.00

materials
obtained from the road cutting within a lead of 50 m, not les
s than 97 % of standard Proctor density after laying them in
layers of 20 cm. to 30 cm. with vibratory roller.

Watering & compacting of embankment formed of 0.00 0.00

materials
obtained from the road cutting within a lead of 50 m, not les
s
than 97% of standard Proctor density after laying them in lay
ers of 20 cm. to 30 cm. with Power roller.

Conveying materials obtained from road cutting including all 0.00 0.00

lifts, laying in layers of 20cm to 30cm. breaking clods, dressin
g
to the required lines, curves, grades and section, watering an
d
compacting to not less than 97% of standard Proctor density
for a lead of over 50m. to 300m. inclusive from the site of
excavation to the site of deposition as directed.
Conveying materials obtained from road cutting including all 0.00 0.00
lifts, laying in layers of 20cm. to 30cm. breaking clods, dressi
ng
to the required lines, curves, grades and section, watering an
d
compacting to not less than 97% of standard proctor density
for a lead of 300m. to 500m. inclusive, from the site of
excavation to the site of deposition as directed.

Providing earth work in embankment with approved materi 0.00 0.00

als
obtained from departmental land or other sources upto lead
of 50m. including all lifts, laying in layers of 20cm. to 30cm.
thickness breaking clods, dressing to the required lines, curv
es,
grades & section, watering and compaction with Power rolle
r to
achieve not less than 97 % of standard proctor density etc.
complete

Providing earth work in embankment with approved materi 0.00 0.00

als
obtained from departmental land or other sources upto lead
of 50m. including all lifts, laying in layers of 20cm. to 30cm.
thickness breaking clods, dressing to the required lines, curv
es,
grades & section, watering and compaction with vibratory ro
ller with V Sat attachment to achieve not less than 97 %
of standard proctor density etc. complete

Supplying hard murum/ kankar at the road site, 0.00 0.00

including conveying and stacking complete.
0.00 0.00

Compacting the hard murum side widths including laying in 0.00 0.00

layers on each side with power roller including artificial wate
ring etc. complete.

Picking the road surface including sectioning etc. 0.00 0.00

complete (WBM surface.)
0.00 0.00
Picking the road surface including sectioning etc. complete (
BT surface.)

Providing dry rubble stone pitching 23 cm (about 9" ) thick 0.00 0.00

including all material, quarry spalls, labour etc. complete.
( lead to be considered seperately )

Providing, laying and spreading soil on a prepared sub grade, 0.00 0.00

pulverizing, mixing the spread soil in place with rotavator wi
th 3
per cent slaked lime with minimum content of 70 per cent of
CaO, grading with motor grader and compacting with the ro
ad
roller at OMC to achieve at least 98 per cent of the max dry
density to form a layer of sub base.

Providing, laying and spreading soil on a prepared sub grade, 0.00 0.00

pulverizing,  adding  the  designed  quantity  of  cement  to
the
spread soil, mixing in place with rotavator, grading with the
motor grader and compacting with the road roller at OMC to
achieve  the  desired  unconfined  compressive  strength
and  to form a layer of sub base/base.

Laying and spreading available soil in the sub grade on a 0.00 0.00

prepared surface, pulverizing, mixing the spread soil in place
with rotavator with 3 per cent slaked lime having minimum
content of 70 per cent of CaO, grading with motor grader an
d
compacting with the road roller at OMC to the desired densi
ty to
form a layer of improved sub grade   By Mechanical Means
Laying  and  spreading  available  soil  in  the  sub grade  on  a 0.00 0.00
prepared surface, pulverizing, mixing the spread soil in place
with rotavator with 3 per cent slaked lime having minimum
content of 70 per cent of CaO, grading with motor grader an
d
compacting with the road roller at OMC to the desired densi
ty to form a layer of improved sub grade   By Manual Means

Construction of embankment with Flyash conforming to tabl 0.00 0.00

e 1 of IRC: SP: 58 2001 obtained from coal or lignite burning
thermal power stations as waste material, spread and comp
acted
in layer of 200mm thickness each at OMC, all as specified in
IRC: SP: 58 2001 and as per approved plans.

Construction of granular sub base by providing close graded 0.00 0.00

Material, mixing in a mechanical mix plant at OMC, carriage
of
mixed Material to work site, spreading in uniform layers wit
h motor  grader  on  prepared  surface  and  compacting
with
vibratory power roller to achieve the desired density, compl
ete
as per clause 401   Plant Mix Method and Grading   II Material
Construction of granular sub base by providing close graded 0.00 0.00
Material, mixing in a mechanical mix plant at OMC, carriage
of
mixed Material to work site, spreading in uniform layers wit
h motor  grader  on  prepared  surface  and  compacting
with
vibratory power roller to achieve the desired density, compl
ete
as per clause 401  Plant Mix Method and Grading   III Material

Construction of granular sub base by providing close graded 0.00 0.00

material,  spreading  in  uniform  layers  with  motor  grader
on
prepared surface, mixing by mix in place method with rotava
tor
at OMC, and compacting with vibratory roller to achieve the
desired density, complete as per clause 401   By Mix in Place
Method and Grading   III Material
Lime, Fly ash Stabilized Soil Sub 0.00 0.00
Base   Construction of Subbase using lime   Fly ash admixture
with granular soil, free from organic  matter/  deleterious
material  or  clayey  silts  and  low
plasticity clays having PI between 5 and 20 and liquid limit le
ss than 25 and commercial dry lime, slaked at site or pre
slaked
with CaO content not less than 50 per cent, Fly ash to confor
m to gradation as per clause 4.3 of IRC: 88
1984, lime + Fly ash
content ranging between 10 to 30 per cent, the minimum un
confined  compressive  strength  and  CBR  value  after  28
days
curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cen
t respectively, all as specified in IRC: 88 1984.

Cement Treated Crushed Rock or combination as per 0.00 0.00

clause 403.2 and table 400.4 in Sub base/ Base
Providing, laying
and spreading Material on a prepared sub grade, adding the
designed quantity of cement to the spread Material, mixing i
n place with rotavator, grading with the motor grader
and
compacting with the road roller at OMC to achieve the desir
ed
unconfined compressive strength and to form a layer of subb
ase/base course

Scarifying the existing granular road surface to a depth of 50 0.00 0.00

mm by manual means and disposal of scarified material wit
hin all lifts and leads upto 1000 metres.

Dismantling of flexible pavements and disposal of dismantle 0.00 0.00

d
materials up to a lead of 1000 metres, stacking serviceable a
nd unserviceable materials separately. By Mechanical
Means etc. complete.
Dismantling of cement concrete pavement by mechanical m 0.00 0.00
eans
using pneumatic tools, breaking to pieces not exceeding 0.02
cum in volume and stock piling at designated locations and
disposal of dismantled materials up to a lead of 1000 metres
,
stacking serviceable and unserviceable materials separately
etc. complete.

Making 50 mm x 25 mm furrows, 45 degree to the center lin 0.00 0.00

e of the road and at one metre interval in the existing
thin
bituminous wearing coarse including sweeping and disposal
of excavated material within 1000 metres lead

Making 50 mm x 50 mm furrows, 45 degree to the center lin 0.00 0.00

e of the road and at one metre interval in the existing
thin
bituminous wearing coarse including sweeping and disposal
of excavated material within 1000 metres lead

Brooming the W.B.M. surface by wire Brushes, coir brushers, 0.00 0.00

dusting, cleaning etc. for receiving the bituminous treatment
complete. Brooming the water Bound Macadam surface by
wire.

Providing, laying, spreading and compacting stone aggregate 0.00 0.00

s of  specific  sizes  to  water  bound  macadam  specification
including  spreading  in  uniform  thickness,  hand  packing,
to
proper grade and camber, applying and brooming requisite t
ype
of screening/ binding Materials to fill up the interstices of co
arse
aggregate, watering and compacting with Intelligent Compac
tor with compaction analyzer and V
Sat attachment. to the required
density. By Manual Means   Grading I (Using Screening Type
A (13.2 mm) Aggregate)
Providing, laying, spreading and compacting stone aggregate 0.00 0.00
s of  specific  sizes  to  water  bound  macadam  specification
including  spreading  in  uniform  thickness,  hand  packing
to
proper grade and camber, applying and brooming requisite t
ype
of screening/ binding Materials to fill up the interstices of co
arse
aggregate, watering and compacting with Intelligent Compac
tor with compaction analyzer and V
Sat attachment. to the required density. By Manual Means
Grading I (Using Screening Type B (11.2 mm) Aggregate)

Providing, laying, spreading and compacting stone aggregate 0.00 0.00

s of  specific  sizes  to  water  bound  macadam  specification
including  spreading  in  uniform  thickness,  hand  packing
to
proper grade and camber, applying and brooming requisite t
ype
of screening/ binding Materials to fill up the interstices of co
arse
aggregate, watering and compacting with Intelligent Compac
tor with compaction analyzer and V
Sat attachment. to the required
density. By Mechanical Means   Grading I (Using Screening Ty
pe A (13.2) mm Aggregate)
Providing, laying, spreading and compacting stone aggregate 0.00 0.00
s of  specific  sizes  to  water  bound  macadam  specification
including  spreading  in  uniform  thickness,  hand  packing
to
proper grade and camber, applying and brooming requisite t
ype
of screening/ binding Materials to fill up the interstices of co
arse aggregate,  watering  and  compacting  ?with  Intelligent
Compactor with compaction analyzer and V
Sat attachment.to
the required density. By Mechanical Means  Grading I (Using
Screening Type B (11.2 mm) Aggregate)

Providing, laying, spreading and compacting stone aggregate 0.00 0.00

Crushed Cement Concrete Sub base / Base Breaking and 0.00 0.00

crushing  of  material  obtained  by  breaking  damaged
cement
concrete slabs to size range not exceeding 75 mm as specifie
d in  table  400.7  transporting  the  aggregates  obtained
from
breaking of cement concrete slabs at a lead of 1 km., laying
and  compacting  the  same  as  sub  base/  base  course,
constructed as WBM to clause 404 except the use of screeni
ng or binding material.
Penetration Coat Over Top Layer of Crushed Cement Concret 0.00 0.00
e
Base   Spraying of bitumen over cleaned dry surface of crush
ed cement concrete base at the rate of 25 kg per 10 sqm by a
bitumen pressure distributor, spreading of key aggregates at
the
rate of 0.13 cum per 10 sqm by a mechanical gritter and rolli
ng the surface as per clause 506.3.8

Wet Mix Macadam Providing, laying, spreading and 0.00 0.00

compacting graded stone aggregate to wet mix
macadam
specification including premixing the Material with water at
OMC
in mechanical mix plant carriage of mixed Material by tipper
to site, laying in uniform layers with paver in sub base / base
course on well prepared surface and compacting with vibrat
ory roller to achieve the desired density.

Crusher Run Macadam Base Providing crushed stone 0.00 0.00

aggregate,  depositing  on  a  prepared  surface  by  hauling
vehicles, spreading and mixing with a motor grader, waterin
g
and compacting with a vibratory roller to clause 410 to form
a layer of sub base/Base   By Mix in Place Method for 45 mm
maximum size
Crusher  Run  Macadam  Base     Providing  crushed  stone 0.00 0.00
aggregate,  depositing  on  a  prepared  surface  by  hauling
vehicles, spreading and mixing with a motor grader, waterin
g
and compacting with a vibratory roller to clause 410 to form
a layer of sub base/Base   By Mixing Plant Method for 53 mm
maximum size

Crusher Run Macadam Base Providing crushed stone 0.00 0.00

Dismantling of existing B.T. Surface (flexible Pavement) to a 0.00 0.00

depth of 50 mm.by cold milling with Writgen or similar type
machine including loading of dismantled material by automa
tic
conveyor belt to transport vehicle at site excluding lead char
ges

Prime coat Providing and applying primer coat with bitume 0.00 0.00

n emulsion on prepared surface of granular Base
including
cleaning of road surface and spraying, primer at the rate of
0.60 kg/sqm using mechanical means.

Providing and applying tack coat on the prepared 0.00 0.00

surface
heating by fames in Boiler and spraying bitumen set footed i
n bitumen boller on B.T. surface 2.5 kg/10 sqm.VG 30
bulk bitumen

Providing and applying tack coat on the prepared 0.00 0.00

surface
heating by fames in Boiler and spraying bitumen with spraye
r on Dry / Hungry B.T. surface 3 kg/10 sqm. VG
30 bulk bitumen
Providing and applying tack coat on the prepared 0.00 0.00
surface
heating by flames in Boiler and spraying bitumen with spray
er
on Granular surface treated with primer @ 2.75 kg/10 sqm
with VG 30 bulk Bitumen

Providing and applying tack coat on the prepared 0.00 0.00

surface
heating by flames in Boiler and spraying bitumen with spray
er
on Concrete surface treated with primer @ 3.25 kg/10 sqm
with VG 30 bulk Bitumen

Providing and applying tack coat with bitumen emulsion (RS 0.00 0.00

1)
using emulsion pressure distributer at the rate of 0.20 kg per
Sq.M. on the prepared bituminous cleaned with
mechanical broom

Providing and constructing 75 mm. thick Modified Penetrati 0.00 0.00

on
Macadam (MPM) road surface including all materials, prepar
ing
the existing road surface, spreading 40 mm. stone metal laye
rs
30% crusher broken metal + 70% Hand broken (by breaking
rubble obtained by blasting) heating and spraying the bitum
en of  VG 30  grade  @  2  Kg/sqm,  spreading  12  mm.size
chips
compacting with three wheel static roller having weight 8 to
10 MT.  to  achive  the  desired  degree  of  compaction  as
per Technical  Specification  Clause  506  etc.  complete.
Including picking of existing WBM surface.
Providing and constructing 75 mm. thick Modified Penetracti 0.00 0.00
on
Macadam (MPM) road surface including all materials, prepar
ing
the existing road surface, spreading 40 mm. stone layers met
al 30% crusher  broken  metal  +  70%  Hand  broken  metal
(By
breaking Rubble obtained by blasting) , heating and spraying
the  bitumen  of  VG 30  grade  @  2  kg  /  sqm  ,  spreading
12mm.size  chips  compacting  with  three  wheel  static
roller
having weight 8 to 10 MT. to achive the desired degree of
compaction  as  per  Technical  Specification  Clause  506
etc.complete,  including  applying  tack  coat  of  VG  10
grade bitumen  at  the  rate  of  0.30  Kg  Sqm.  on  existing
bitumen surface.

Providing and constructing 50 mm. thick Modified Penetrati 0.00 0.00

on
Macadam (MPM) road surface including all mataerials, prep
aring
the existing road surface, spreading 40mm. stone metal laye
rs
30% crusher broken metal + 70% Hand broken (by breaking
rubble obtained by blasting) heating and spraying the bitum
en of VG
30 grade @ 1.75 kg/sqm, spreading 12mm.size chips
compacting with static roller having weight 8 to 10 MT. to
achive the desired degree of compaction as per
Technical
Specification Clause 506 etc. complete. Including picking of
existing WBM surface.
Providing and constructing 50 mm. thick Modified Penetrati 0.00 0.00
on
Macadam (MPM) road surface including all materials, prepar
ing
the existing road surface, spreading 40mm. stone layers met
al 30% crusher broken metal + 70% Hand broken metal
(By
breaking Rubble obtained by blasting) , heating and spraying
the bitumen of VG 30 @ 1.75 kg / sqm, spreading 12mm.size
chips compacting with Static roller having weight 8 to 10 MT.
to achive the desired degree of compaction as per Technical
Specification Clause 506 etc.complete, including applying tac
k coat at the rate of 0.30 Kg Sqm.
(on existing bitumen surface.)

Providing, laying and compacting of built up spray grout layer 0.00 0.00

75  mm  thick  over  prepared  base  consisting  of  two
layers composite  construction  of  compacted  crushed
coarse aggregates  with  application  of  bituminous  binder
of  VG 30
Grade @ 1.520 Kg/ Sqm after each layer, ( i.e 1.520x2=3.04
say 3.00 Kg/Sqm) and with key aggregates placed on top of
the second layer and compacting with static roller 8 to 10 M
T. Excluding cost of tack coat and scarifying etc. Complete.
BITUMINOUS  MACADAM:  Proving  and  laying  bituminous 0.00 0.00
macadam  using  crushed  aggregates  of  Grading  1,
premixed
with bituminous binder, transported to site with VTS , laid o
ver
a previously prepared surface, finished to the required grade
,
level, alignment, and rolling to achieve the desired compacti
on for  80/100  mm  compacted  thickness  with  3.3  %  VG
30
Bitumen.   USING 80 TPH Batch mix type hot mix plant with
SCADA, Sensor Paver, Intelligent Compactor with compactio
n analyzer and V Sat attachment.

BITUMINOUS MACADAM: Proving and laying bituminous 0.00 0.00

macadam  using  crushed  aggregates  of  Grading  2,
premixed
with bituminous binder, transported to site with VTS , laid o
ver
a previously prepared surface, finished to the required grade
,
level, alignment, and rolling to achieve the desired compacti
on for 50/75 mm compacted thickness with 3.4 % VG
30 Bitumen.
USING 80 TPH Batch mix type hot mix plant with SCADA,
Sensor Paver, Intelligent Compactor with compaction analyz
er and V Sat attachment.
BITUMINOUS  MACADAM:  Providing  and  laying  bituminous 0.00 0.00
macadam using crushed aggregate of Grading 1, premixed wi
th
bituminous binder, transported at site with VTS, laid over a
previously  prepared  surface  ,  finished  to  the  required
grade
,level, alignment,and rolling to achieve the desired density f
or
80/100 mm compacted thickness with drum mix type hot mi
x
plant with SCADA having complying essential features of Hot
mix  plant  as  per  IRC 27  2009  specified  conditions  and
attachments  such  as  electronic  load  sensor  based  belt
conveyers,automatic synchronization of bitumen and aggreg
ate
fedder,built in dust controller system and PLC for Drum Mix
plant ,Sensor paver,and Vibratory roller excluding prime/Tac
k coat etc. complete   Bitumen VG 30 grade 3.30%

BITUMINOUS MACADAM: Providing and laying bituminous 0.00 0.00

macadam using crushed aggregate of Grading 2, premixed wi
th
bituminous binder, transported at site with VTS, laid over a
previously  prepared  surface  ,finished  to  the  required
grade
,level, alignment, and rolling to achieve the desired density f
or
50/75 mm compacted thickness with   Using drum mix type
hot mix plant with SCADA having complying essential featur
es of Hot mix plant as per IRC 27
2009 specified conditions and attachments  such  as
electronic  load  sensor  based  belt
conveyers, automatic synchronization of bitumen and aggreg
ate
fedder, built in dust controller system and PLC for Drum Mix
plant, Sensor paver and Vibratory roller excluding prime/Tac
k coat etc.complete   Bitumen VG 30 grade 3.40%
DENSE  BITUMINOUS  MACADAM:  Proving  and  laying   0.00 0.00
dense
bituminous macadam using crushed aggregates of Grading 1
, premixed with bituminous binder VG
30 Bitumen @ 4.50 per
cent by weight of total mix and filler, transported to site wit
h
VTS , laid over a previously prepared surface, finished to the
required  grade,  level,  alignment,  and  rolling  to  achieve
the desired density for 76
100 mm compacted thickness .USING 80
TPH Batch mix type hot mix plant with SCADA, Sensor Paver,
Intelligent  Compactor  with  compaction  analyzer  and  V Sat
attachment with Stone Dust filler.

DENSE BITUMINOUS MACADAM: Proving and laying 0.00 0.00

dense
bituminous macadam using crushed aggregates of grading 2,
premixed with bituminous binder VG 30 Bitumen @ 4.50 per
cent by weight of total mix and filler, transported to site wit
h
VTS , laid over a previously prepared surface, finished to the
required  grade,  level,  alignment,  and  rolling  to  achieve
the
desired density for 50/75 mm compacted thickness .USING 8
0
TPH Batch mix type hot mix plant with SCADA, Sensor Paver,
Intelligent  Compactor  with  compaction  analyzer  and  V Sat
attachment with Stone Dust filler.
DENSE  BITUMINOUS  MACADAM:  Providing  and  laying   0.00 0.00
dense
bituminous macadam using crushed aggregate of grading 1,
premixed with bituminous binder Bitumen VG
30 grade,@ 4.50
% by weight of total mix and filler, transported at site with V
TS,
laid over a previously prepared surface , finished to the requ
ired grade  ,level,  alignment,and  rolling  to  achieve  the
desired
density for 76/100 mm compacted thickness with drum mix
type  hot  mix  plant  with  SCADA  having  complying
essential features  of  Hot  mix  plant  as  per  IRC 27 2009
specified conditions  and  attachments  such  as  electronic
load  sensor based  belt  conveyers,  automatic
synchronization  of  bitumen
and aggregate fedder,built in dust controller system and PLC
for
Drum Mix plant ,Sensor paver, and Vibratory roller excluding
prime/Tack  coat  etc.  complete    Bitumen  VG 30  grade  with
stone dust filler
DENSE  BITUMINOUS  MACADAM:  Providing  and  laying   0.00 0.00
dense
bituminous macadam using crushed aggregate of grading 2,
premixed with bituminous binder,@ 4.50 % by weight of tot
al mix  and  filler,  transported  at  site  with  VTS,  laid  over
a previously  prepared  surface  ,  finished  to  the  required
grade
,level, alignment,and rolling to achieve the desired density f
or
50/75 mm compacted thickness with drum mix type hot mix
plant with SCADA having complying essential features of Hot
mix  plant  as  per  IRC 27 2009  specified  conditions  and
attachments  such  as  electronic  load  sensor  based  belt
conveyers, automatic synchronization of bitumen and aggreg
ate
fedder,built in dust controller system and PLC for Drum Mix
plant ,Sensor paver, and Vibratory roller excluding prime/Tac
k coat etc. complete   Bitumen VG
30 grade with stone dust filler

BITUMINOUS CONCRETE: Providing and laying 0.00 0.00

bituminous
concrete using crushed aggregates of grading 1, premixed wi
th
bituminous binder @ 5.20 per cent by weight of total mix an
d filler,  transported  to  site  with  VTS  ,  laid  over  a
previously prepared  surface,  finished  to  the  required
grade,  level,
alignment, and rolling to achieve the desired compaction for
50 mm compacted thickness with VG
30 Bitumen,Excluding prime / tack coat. For Bitumen VG
30 bulk   USING 80 TPH Batch mix type  hot  mix  plant  with
SCADA,  Sensor  Paver,  Intelligent
Compactor with compaction analyzer and V
Sat attachment with Stone Dust filler
BITUMINOUS  CONCRETE:   Providing  and  laying   0.00 0.00
bituminous
concrete using crushed aggregates of grading 2, premixed wi
th
bituminous binder @ 5.40 per cent by weight of total mix an
d filler,  transported  to  site  with  VTS  ,  laid  over  a
previously prepared  surface,  finished  to  the  required
grade,  level,
alignment, and rolling to achieve the desired compaction for
30/40 mm compacted thickness with VG
30 Bitumen,Excluding prime / tack coat. For Bitumen VG
30 bulk   USING 80 TPH Batch  mix  type  hot  mix  plant
with  SCADA,  Sensor  Paver, Intelligent  Compactor  with
compaction  analyzer  and  V Sat
attachment with Stone Dust filler

BITUMINOUS CONCRETE: Providing and laying bituminous 0.00 0.00

concrete using crushed aggregate of grading 1, premixed wit
h bituminous binder @5.2% by weight of total mix and filler,
transported at site with VTS, laid over a previously prepared
surface, finished to the required grade ,level, alignment, and
rolling  to  achieve  the  desired  density  for  50mm
compacted
thickness with drum mix plant with SCADA, Sensor paver an
d Vibratory  roller  excluding  prime/Tack  coat  etc.
complete   Bitumen VG 30 grade with stone dust filler
BITUMINOUS  CONCRETE:  Providing  and  laying  bituminous 0.00 0.00
concrete using crushed aggregate of grading 2, premixed wit
h bituminous binder @5.4% by weight of total mix and filler,
transported at site with VTS, laid over a previously prepared
surface, finished to the required grade ,level, alignment, and
rolling to achieve the desired density for 30/40 mm compact
ed
thickness with drum mix plant with SCADA, Sensor paver an
d Vibratory  roller  excluding  prime/Tack  coat  etc.
complete   Bitumen VG 30 grade with stone dust filler

Providing bituminous Type A liquid seal coat on bituminous 0.00 0.00

surface including supplying all materials & bitumen of VG 30
grade preparing existing road surface, heating and
applying
bitumen @ 0.98 KgSqm. by mechanical means, spreading chi
ps and rolling, by static roller having weight 8 to 10 MT. etc.
complete.

Providing and laying of Type B premix seal coat with HMP of 0.00 0.00

approprate capacity not less than 75 tonne / hour using
crushed stone chipping 6.70 mm size and penetration bitum
en of VG 30 grade @ 0.68 Kg / Sqm. , preparing existing road
surface including mixing in suitable drum mix plant and rolli
ng by static roller having weight 8 to 10 MT. etc. complete.

Providing and laying of Type B premix seal coat with HMP of 0.00 0.00

approprate  crushed  stone  chipping  6.70  mm  size  and
penetration  bitumen  of  VG 30  grade  @  0.68  Kg  /  Sqm.  ,
preparing  existing  road  surface  including  mixing  in
suitable
Batch Mix plant and rolling by static roller having weight 8 to
10 MT. etc. complete.
Surface  Dressing     Providing  and  laying  surface  dressing   0.00 0.00
as
wearing course in single coat using crushed stone aggregates
of
specified size on a layer of bituminous binder laid on prepar
ed surface and rolling with 8
10 tonne smooth wheeled steel roller.    a)  19  mm  nominal
chippling  size  (bitumen  12.00  kg/10 Sq.M.)   Bitumen VG
30 bulk bitumen

Surface Dressing Providing and laying surface dressing 0.00 0.00

as
wearing course in single coat using crushed stone aggregates
of
specified size on a layer of bituminous binder laid on prepar
ed surface and rolling with 8
10 tonne smooth wheeled steel roller.
d) 6 mm nominal chippling size (bitumen 7.50 kg/10 Sq.M
Bitumen VG 30 bulk bitumen
Open Graded Premix Surfacing  Providing and Laying OGC 20 0.00 0.00
mm thickness composed of 13.2 mm to 5.6 mm aggregates
premixed with bituminous binder transported to site with V
TS ,
laid over a previously prepared surface, finished to the requi
red grade,  level,  alignment,  and  rolling  to  achieve  the
desired compaction VG
30 Bitumen, including providing and laying seal
coat sealing voids in a bituminious surface laid to the specifi
ed
level and cross fall using Type A seal coat but excluding prim
e / tack coat. For Bitumen VG 30 bulk
USING drum mix type hot
mix plant with SCADA, Paver and Vibratory roller

Open Graded Premix Surfacing Providing and Laying OGC 20 0.00 0.00

mm thickness composed of 13.2 mm to 5.6 mm aggregates
premixed with bituminous binder transported to site with V
TS ,
laid over a previously prepared surface, finished to the requi
red grade,  level,  alignment,  and  rolling  to  achieve  the
desired compaction VG
30 Bitumen, including providing and laying seal
coat sealing voids in a bituminious surface laid to the specifi
ed
level and cross fall using Type A seal coat but excluding prim
e / tack coat. For Bitumen VG
30 bulk   USING 80 TPH Batch mix
type hot mix plant with SCADA, Paver and Vibratory roller
Open Graded Premix Surfacing  Providing and Laying OGC 20 0.00 0.00
mm thickness composed of 13.2 mm to 5.6 mm aggregates
premixed with bituminous binder VG 30 Grade transported t
o
site with VTS , laid over a previously prepared surface, finish
ed
to the required grade, level, alignment, and rolling to achiev
e
the desired compaction , including providing and laying seal
coat sealing voids in a bituminious surface laid to the specifi
ed
level and cross fall using Type A seal coat but excluding prim
e / tack coat. For Bitumen VG
30 bulk   USING 80 TPH Batch mix type  hot  mix  plant  with
SCADA,  Sensor  Paver,  Intelligent
Compactor with compaction analyzer and V Sat attachment.
Providing  and  laying  in situ  M30  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M35  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M40  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M30  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M35  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M40  Grade  unreinforced   0.00 0.00
plain
cement concrete pavement over a prepared sub base with 4
3 grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M30  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement) over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M35  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement) over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M40  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement) over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  with  approved  make  paver,compacted
and
finished in a continuous operation, finishing to lines and gra
des as  directed  by  Engineer in charge  and  curing  by  curing
compound  /by  providing  cement  vata  in  cement  Mortar
1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bott
om
and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period by any other method approv
ed by Engineer in
charge ( initial lead of 5.00 Km for raw materials
up to plant site) Spec. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M30  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement)over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M35  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement) over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Providing  and  laying  in situ  M40  Grade  unreinforced   0.00 0.00
plain cement concrete pavement with max 20% fly Ash ( Fly
ash upto
20% by weight of Cement) over a prepared sub base with 43
grade cement , coarse and fine aggregate conforming to IS
383, using fine & coarse aggregates combined gradation as p
er Table 600
3 of MORTH Specification 2013, mixed in a batching
and mixing plant/ non tilting mixer and Weigh batcher as pe
r approved  mix  design,  admixtures,  transporting  to  site,
spreading,  laying  compacting  and  finished  in  a
continuous
operation, finishing to lines and grades as directed by Engine
erin charge  and  curing  by  curing  compound  /by  providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top wit
h
depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer in charge (
initial lead of 5.00 Km for raw materials up to plant site) Spe
c. No. M.O.R.T.& H 2013. Cl 602 P.N.263
Construction  of  dry  lean  cement  concrete  Sub   base  over   0.00 0.00
a prepared sub
grade with coarse and fine aggregate conforming
to IS: 383, the size of coarse aggregate not exceeding 25 mm,
, cement content not to be less than 150 kg/ cum, optimum
moisture  content  to  be  determined  during  trial  length
construction, concrete strength not to be less than 10 Mpa a
t 7 days,  mixed  in  a  batching  plant/  Weigh  batch  mixer,
transported to site with all leads and lifts, laid with a paver
with
electronic sensor /by suitable means as approved by Engine
erin
charge , compacting with vibratory roller, finishing, curing
and including preparation of sub
grade surface if required etc. complete.

Providing and fixing in position mild steel 32 mm dia dowel 0.00 0.00

bars precoated with anticorrosive epoxy paint of required Di
a. 60  cms.  Long  and  at  30.00  cm.  C/C  &  wherever
directed
including handling, straightening, necessary cutting supporte
d by  HYSD  chairs  with  proper  alignment  by  using
properly designed  assembly  of  Bulkheads  lubricating  half
length  with bituminous paint as directed etc. complete.

Providing and fixing in position mild steel 25mm dia dowel b 0.00 0.00

ars
precoated with anticorrosive epoxy paint of required Dia. 60
cms. Long and at 30.00 cm. C/C & wherever directed includi
ng
handling, straightening, necessary cutting supported by HYS
D chairs  with  proper  alignment  by  using  properly
designed
assembly of Bulkheads lubricating half length with bitumino
us paint as directed etc. complete.
Providing and fixing in position HYSD tie bars precoated with 0.00 0.00
anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at
30.00  cm.  C/C  &  wherever  directed  including  handling,
straightening wrapping with paper of approved quality for h
alf
length, necessary cutting, handling, straightening , supporte
d by  assembly  of  HYSD  chairs  with  proper  alignment  etc.
complete.

Cutting transverse contraction joints 3 to 4 mm wide and de 0.00 0.00

pth
60mm. .in concrete slab using concrete cutting machine with
diamond studded saw within 48 hours of casting of bay / sla
b
etc. complete including subsequent widening of the groove
8
to 10 mm. wide at top having depth of 15 mm. as directed b
y Engineer incharge.

Providing to contraction joints polysuphide sealent 0.00 0.00

(Pouring grade)  confirming  to  BS  :  5212     1989  into
sawed  groove
widened at top for sealent reservoir of specified size and sha
pe as  per  detailed  drawing  including  fixing  Polyethylene
foam
backer rod of required diameter (appraox. 25% larger than t
he
initial 3 mm.to 4 mm. joint) overlaid with bond breaking tap
e
as per detailed drawing. Item includes cleaning the joints wit
h water  jet  /  air  compressor  &  allowing  joint  to  become
thoroughly dry before sealent is applied and applying primer
. (A)  Contraction  &  longitudinal  joints  (15  mm.  deep  x  8
mm.wide)

Providing and laying 125 micron Low Density Polyethylene ( 0.00 0.00

LDPE)  sheet  confirming  to  IS  3395  :  1997  below
concrete
pavement including all materials and labour complete.
Providing  and  fixing  factory  made  Hydraulically  pressed 0.00 0.00
Mechanically  vibrated  and  compacted  precast  inter
locking cement concrete paving blocks 80MM thick in M
40 grade of
approved size and shape for City streets, small /medium mar
ket
roads,low volume roads, utility cuts on arterial roads etc. as
specified  and  as  per  IS  15658:2006  including  cost  of  all
materials,  manufacturing,  curing,  transportation  of
blocks  to
work site including loading, unloading and stacking as direct
ed,
laying paving blocks in position over prepared bed of natural
sand / crushed sand of 50 mm thickness including necessary
excavation in all stratas, spreading blindge of fine sand over
the prepared  bed,  compacting  blocks  by  plate  vibrator
etc. complete.

Providing and fixing factory made Hydraulically pressed 0.00 0.00

Mechanically  vibrated  and  compacted  precast  inter
locking cement concrete paving blocks 100MM thick in M
40 grade of
approved size and shape for City streets and roads with high
volume/ heavy traffice as specified and as per IS 15658:2006
including  cost  of  all  materials,  manufacturing,  curing,
transportation  of  blocks  to  work  site  including  loading,
unloading  and  stacking  as  directed,  laying  paving  blocks
in
position over prepared bed of natural sand / crushed sand o
f 50 mm  thickness  including  necessary  excavation  in  all
stratas, spreading  blindge  of  fine  sand  over  the
prepared  bed,
compacting blocks by plate vibrator etc. complete.
Providing and laying in situ cement concrete M   0.00 0.00
30 with tremix
treatment for 200 mm thickness for Concrete Road is includi
ng laying  plastic  sheet  for  125  micron  thickness  with
groove
cutting of 4 mm wide and 20 mm deep with necessary refilli
ng
with bitumen ( excluding reinforcement) with Natural sand e
tc. complete

Providing and casting in situ or precast tapering R.C.C. M 20 0.00 0.00

Barrier type Kerb without gutter ( as per IRC 86 1983)
embedded 125mm below ground level over M
10 PCC finished
neatly with C.M. 1:2, setting the same in C.M. 1:2, including
the required excavation in any strata and removing the
excavated stuff any where in city and redoing the surface as
specified and directed by Engineering In
charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M 20 0.00 0.00

Semi Barrier type Kerb without gutter ( as per IRC 86 1983)
embedded 125mm below ground level over M
10 PCC finished
neatly with C.M. 1:2, setting the same in C.M. 1:2, including
the  required  excavation  in  any  strata  and  removing  the
excavated stuff any where in city and redoing the surface as
specified and directed by Engineering In
charge. Using Concrete Batching and Mixing Plant
Providing and casting in situ or precast tapering R.C.C. M 20 0.00 0.00
Mountable type  Kerb  without  gutter  (  as  per  IRC  86
1983) embedded 125mm below ground level over M
10 PCC finished
neatly with C.M. 1:2, setting the same in C.M. 1:2, including
the  required  excavation  in  any  strata  and  removing  the
excavated stuff any where in city and redoing the surface as
specified and directed by Engineering In
charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M 20 0.00 0.00

Semi Barrier type Kerb with gutter ( as per IRC 86
1983) embedded 125mm below ground level over M
10 PCC finished
neatly with C.M. 1:2, setting the same in C.M. 1:2, including
the required excavation in any strata and removing the
excavated stuff any where in city and redoing the surface as
specified and directed by Engineering In
charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M 20 0.00 0.00

Mountable type Kerb with gutter ( as per IRC 86 1983)
embedded 125mm below ground level over M
10 PCC finished
neatly with C.M. 1:2, setting the same in C.M. 1:2, including
the required excavation in any strata and removing the
excavated stuff any where in city and redoing the surface as
specified and directed by Engineering In
charge. Using Concrete Batching and Mixing Plant
Providing and fixing in position Guard Railing as per Drg. No. 0.00 0.00
15 Type C dt. 20 4 79, with 3 rows of 50mm dia. G.I. pipe
30cm a part and fixed in M.S. channels of section 125 x 65 x
6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as
per detailed drawing, with 3 coats of approved yellow and bl
ack paint including necessary excavation in any strata.

Providing and fixing in position Guard Railing as per Drg. No. 0.00 0.00

15 Type C dt. 20 4 79, with 3 rows of 40mm dia. G.I. pipe
30cm a part and fixed in M.S. channels of section 100 x 50 x
6
mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 x 30cm.
as per detailed drawing, with 3 coats of approved of yellow
and black paint including necessary excavation in any strata.

Providing and fixing Guard Railing of 1000mm height as per 0.00 0.00

Type D Drg. No. 15 dt. 20 4 79, and fixed in 40 x 40 x 6mm
iron, angle embedded in 1:2:4 cement concrete bedding pa
tti
as per detailed drawing, with 3 coats of approved of yellow
and black paint.

Providing and fixing Guard Railing of 1000 mm height in 25m 0.00 0.00

m
M.S. square bars 100 mm C/c. as per Type drawing No. 6 dt.
20 8  85  and  fixed  in  50mm  x  50mm  x  6mm  iron  angle
embedded in 1:2:4 C.C. bedding 55 x 45 cm and 50 x 6 iron
patti as per detailed drawing with 3 coats of approved yello
w and black paint.
Design of overlay for existing B.T. surface with carrying out 0.00 0.00
testing by Benkelman Beam method as per guide lines in IRC
81:1997 including design & testing at site. The charges for
transportation  of  Benkelman  Beam,  loaded  truck,  labour
for
testing and traffic control are not included. Rate as per High
way Research Division No. 1 M.E.R.I., Nashik  4

Carrying out roughness index / road unevenness test with ca 0.00 0.00

r mounted  /  jeep  towed  ARUR  machine  (Automatic  road
unevenness  Recorder)  Calibrated  from  C.R.R.I.  New  Delhi
(Central  Road  Research  Institute)  or  any  other  equivalent
authority including taking observations, feeding data and giv
ing
computerized test result including hire charges of all machin
ery
and labour completed. i) Road surface single lane (B.TW,B.M
.) 5.5  m  to  7.00  m.  Wirdth.  Rate  as  per  Highway
Research Division No. 1 M.E.R.I., Nashik  4
Carrying out roughness index / road unevenness test with ca 0.00 0.00
r mounted  /  jeep  towed  ARUR  machine  (Automatic  road
unevenness  Recorder)  Calibrated  from  C.R.R.I.  New  Delhi
(Central  Road  Research  Institute)  or  any  other  equivalent
authority including taking observations, feeding data and giv
ing
computerized test result including hire charges of all machin
ery
and labour completed. i) Road surface single lane (B.TW,B.M
.) Each  additional  lane  Width.  Rate  as  per  Highway
Research Division No. 1 M.E.R.I., Nashik  4

Dead Journey charges for Transportation of machine/ vehical 0.00 0.00

for Carrying out roughness index / road unevenness test wit
h car  mounted  /  jeep  towed  ARUR  machine  (Automatic
road unevenness  Recorder)  Calibrated  from  C.R.R.I.  New
Delhi (Central  Road  Research  Institute)  or  any  other
equivalent
authority including taking observations, feeding data and giv
ing
computerized test result including hire charges of all machin
ery
and labour completed. Spec. No. : As directed by Engineer in
charge.

Providing and laying a woven Polypropylene Geotextile of Ty 0.00 0.00

peI manufactured from black UV stabilised Polypropylene Ta
pe yarn on the prepared subgrade as the separator cum
reinforcement with necessary overlap as per drawing

Providing and laying a woven Polypropylene Geotextile of Ty 0.00 0.00

peII manufactured from black UV stabilised Polypropylene T
ape yarn on the prepared subgrade as the separator
cum reinforcement with necessary overlap as per drawing

Providing and laying a woven Polypropylene Geotextile of Ty 0.00 0.00

peIII manufactured from black UV stabilised Polypropylene T
ape yarn on the prepared subgrade as the separator
cum reinforcement with necessary overlap as per drawing
Providing and laying a fibre glass geogrid of Tensile strength 0.00 0.00
50
kN/m manufactured from high quality glass fibre strands an
d
coated with a polymer modified bitumen as reinforcement t
o
Asphalt overlay flexible pavements and Asphalt over distress
ed rigid P.C.C.

Providing and laying a fibre glass geogrid of Tensile strength 0.00 0.00

100 kN/m manufactured from high quality glass fibre strand
s
and coated with a polymer modified bitumen as reinforceme
nt to Asphalt overlay flexible pavements and Asphalt
over distressed rigid P.C.C.

Providing and Constructing gabion structure 1 Meter high or 0.00 0.00

required section made up of soft mechanically woven hexag
onal
shaped G.I. wire confirming to IS 16014:2012 having zinc plu
s
PVC coating of overall diameter of 3.7 mm and tying lacing w
ire
of 3.2 mm with edge wire confirming to overall diameter 4.4
mm edges being mechanically selvedge including placing
in
position, fitting neatly with trap stone rubble (15 to 23 cm) a
ll
loose ends to be securely tied (Excluding transportation) etc.
complete. ( In Dry condition and for under water installation
extra cost to be considered)
Providing and Constructing gabion structure 0.50 Meter high 0.00 0.00
or
required section made up of soft mechanically woven hexag
onal
shaped G.I. wire confirming to IS 16014:2012 having zinc plu
s
PVC coating of overall diameter of 3.7 mm and tying lacing w
ire
of 3.2 mm with edge wire confirming to overall diameter 4.4
mm edges being mechanically selvedge including placing
in
position, fitting neatly with trap stone rubble (15 to 23 cm) a
ll
loose ends to be securely tied (Excluding transportation) etc.
complete.( In Dry condition and for under water installation
extra cost to be considered)

Providing and laying Needle Punched and mechanically bon 0.00 0.00

ded
non woven Geotextile of Type III indigenously manufactured
from high quality Propylene staple fibers (continuous filame
nt
will not be accepted) on the prepared subgrade for Seperati
on.

Providing and laying Needle Punched and mechanically bon 0.00 0.00

ded non woven Geotextile of Type II indigenously
manufactured
from high quality Propylene staple fibers (continuous filame
nt
will not be accepted) on the prepared subgrade for Seperati
on.

Removal of telephone / Electric poles including excavation a 0.00 0.00

nd dismantling of foundation concrete and lines under
the
supervision of concerned department, disposal with all lifts
and
up to a lead of 1000 metres and stacking the serviceable and
unserviceable material separately
Carrying out excavation in hard rock up to depth 200mm. to 0.00 0.00
achieve a specified slope of the rock face by controlled use o
f explosives and blasting accessories in properly aligned
and
spaced drill holes, collection of the excavated rock by a 80 H
P
dozer, loading in tipper by a front end loader and disposing o
f
the material with all lifts and lead upto 1000 m, all as specifi
ed in clause No. 303

Construction of Median and Island with Soil Taken from 0.00 0.00

Roadway Cutting Construction of Median and Island above
road level with approved material deposited at site
from
roadway cutting and excavation for drain and foundation of
other structures, spread, graded and compacted as per claus
e 407

Construction of Median and Island with Soil Taken from Borr 0.00 0.00

ow
Areas Construction of median and Island above road level
with approved material brought from borrow pits,
spread, sloped and compacted as per clause 407

Footpaths and Separators Construction of footpath/separat 0.00 0.00

or
by providing a 150 mm compacted granular sub base as per
clause 401 and 25 mm thick cement concrete grade M15, ov
er laid with pre
cast concrete tiles in cement mortar 1:3 including provision
of  all  drainage  arrangements  but  excluding  kerb channel.
Metal Beam Crash Barrier   Type   A, W : Metal Beam Crash 0.00 0.00
Barrier (Providing and erecting a "W "metal beam crash barr
ier
comprising of 3 mm thick corrugated sheet metal beam rail,
70 cm  above  road/ground  level,  fixed  on  ISMC  series
channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,
1.8 m high, 1.1 m below ground/road level, all steel parts an
d fitments to be galvanised by hot dip process, all fittings to
conform to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a spacer of channel section 150 x 7
5 x 5 mm, 330 mm long complete as per clause 810)

Metal Beam Crash Barrier Type B, THRIE : Metal Beam Cras 0.00 0.00

h
Barrier (Providing and erecting a "Thrie " metal beam crash
barrier comprising of 3 mm thick corrugated sheet metal bea
m rail, 85 cm above road/ground level, fixed on ISMC
series
channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to
centre, 2 m high with 1.15 m below ground level, all steel pa
rts
and fitments to be galvanised by hot dip process, all fittings t
o
conform to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a space of channel section 150 x 75
x 5 mm, 546 mm long complete as per clause 810)
Flexible Crash Barrier, Wire Rope Safety Barrier (Providing an 0.00 0.00
d
erecting a wire rope safety barrier with vertical posts of med
ium
weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m),
1.50 m long 0.85 m above ground and 0.65 m below ground
level, split at the bottom for better grip, embedded in M 15
grade cement concrete 450 x 450 x 450 mm, 1.50 m center t
o
center and with 4 horizontal steel wire rope 40 mm dia and
anchored at terminal posts 15 m apart. Terminal post to be
embedded in M 15 grade cement concrete foundation 2400
x
450 x 900 mm (depth), strengthened by a strut of RS joist 10
0 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm,
1.50 m long at the bottom, all embedded in foundation
concrete as per approved design and drawing, rate excluding
excavation and cement concrete.)

Anti Glare Screen with 25 mm steel pipe framework fixed wi 0.00 0.00

th
circular and rectangular vans (Providing and erecting an anti
glare  screen  with  25  mm  dia  vertical  pipes  fabricated
and
framed in the form of panels of one metre length and 1.75
mtr height  fixed  with  circular  vane  250  mm  dia  at  top
and
rectangular vane 600 x 300 mm at the middle, made out of
steel sheet of 3 mm thickness, end vertical pipes of the pane
l
made larger for embedding in foundation concrete, applying
2 coats  of  paint  on  all  exposed  surfaces,  all  as  per
approved design and drawings.)
Anti     Glare  Screen  with  Rectangular  Vane  of  MS  sheet 0.00 0.00
(Providing  and  erecting  anti     glare  screen  with
rectangular
vanes of size 750 x 500 mm made from MS sheet, 3 mm thic
k and fixed on MS angle 50 x 50 x 6 mm at an angle of 450 to
the direction of flow of traffic, 1.5 m center to center, top ed
ge
of the screen 1.75 m above ground level, vertical post firmly
embedded  in  cement  concrete  foundation  0.60  m  below
ground level, applying 2 coats of paint on exposed faces, all
complete as per approved design and drawings)

Providing Reinforced cement concrete crash barrier at the ed 0.00 0.00

ges of  the  road,  approaches  to  bridge  structures  and
medians, constructed  with  R.C.C.  M  20  Grade  concrete
with  HYSD
reinforcement conforming to IRC:21 and dowel bars 25 mm
dia, 450  mm  long  at  expansion  joints  filled  with  pre
moulded
asphalt filler board, keyed to the structure on which it is buil
t and installed as per design given in the enclosure to MOST
circular No. RW/NH   33022/1/94
DO III dated 24 June 1994 as per  dimensions  in  the
approved  drawing  and  at  locations
directed by the Engineer, all as specified etc. complete. Spec:
MORT & H 2013 Cl 811 Page No 360
Providing Reinforced cement concrete crash barrier at the ed 2908.00 69.00
ges of  the  road,  approaches  to  bridge  structures  and
medians, constructed  with  R.C.C.  M  25  Grade  concrete
with  HYSD
reinforcement conforming to IRC:21 and dowel bars 25 mm
dia, 450  mm  long  at  expansion  joints  filled  with  pre
moulded
asphalt filler board, keyed to the structure on which it is buil
t and installed as per design given in the enclosure to MOST
circular No. RW/NH   33022/1/94
DO III dated 24 June 1994 as per  dimensions  in  the
approved  drawing  and  at  locations
directed by the Engineer, all as specified etc. complete. Spec:
MORT & H 2013 Cl 811 Page No 360

Providing Reinforced cement concrete crash barrier at the ed 2926.00 70.00

ges of  the  road,  approaches  to  bridge  structures  and
medians, constructed  with  R.C.C.  M  30  Grade  concrete
with  HYSD
reinforcement conforming to IRC:21 and dowel bars 25 mm
dia, 450  mm  long  at  expansion  joints  filled  with  pre
moulded
asphalt filler board, keyed to the structure on which it is buil
t and installed as per design given in the enclosure to MOST
circular No. RW/NH   33022/1/94
DO III dated 24 June 1994 as per  dimensions  in  the
approved  drawing  and  at  locations
directed by the Engineer, all as specified etc. complete. Spec:
MORT & H 2013 Cl 811 Page No 360

Labour for filling pot holes with premix asphalt chips, cleani 0.00 0.00

ng
the road surface with wire brushes & gunny bags, applying t
ack
coat, spreading mixture hand ramming or light compaction
with
power roller conveying material to the site of work (excludin
g cost and of material fuel & heating asphalt) etc complete.
Labour for metal patch repairs including preparing 0.00 0.00
surface,
adding required quantity of metal, murum, watering, rammi
ng etc complete. Spec.No.: As directed by Engineer in
charge. (excluding cost and of material )

Restoration of rain cuts with soil, murum gravel or a mixture 0.00 0.00

of
these, clearing the loose soil, benching for 300mm width layi
ng
fresh material in layers not exceeding 250 mm and compacti
on
with plate compactor or power rammer to restore the origin
al alignment, level and slopes as per drawings and
MORTH specification clause 3002

Making up loss of material/irregularities on shoulders 0.00 0.00

to  the design  level  by  adding  fresh  approved  selected
soil  and compacting  it  with  appropriate  equipment  at
OMC  as  per MORTH specification clause 3003

Stripping excess soil from the shoulder surface to achieve th 0.00 0.00

e
approved level and compacting with plate compactor at OM
C as per drawings as per MORTH specification clause 3003

Repair to pot holes by removal of failed material, trimming t 0.00 0.00

he
sides to vertical and levelling the bottom, cleaning the same
with  compressed  air  or  any  appropriate  method  filled
with 75mm  B.M,  applying  bitumen  tack  coat  at  the
bottom  and
vertical sides as per as per MORTH specification clause 3004.
1 & 3004.2

Patch repair on already filled pot holes with 20 mm premix 0.00 0.00

carpet and seal coat as per MORTH specification clause 3004
.1 & 3004.2

Repair to pot holes and removal of loose material, trimming 0.00 0.00

of
sides, cleaning of surface by providing tack coat, 20 mm thic
k pre
mix carpet and seal coat as per MORTH specification clause
3004.1 & 3004.2
Maintenance of gravel road including making up the loss of 0.00 0.00
profile, rectifying corrugated surface, filling up of depression
s, pot holes and erosion gullies by adding fresh material
and
compacting it with appropriate equipment or to strip excess
of
material from the road surface as per drawings etc complete

Providing pick and roll surface by picking the old WBM surfa 0.00 0.00

ce
to the required standard, adding 30% of 40mm size metal an
d required  quantity  of  murum  including  laying  sectioning,
watering, compacting with static roller with thin layer of mu
rum blindage  on  carrageway,  watering  and  compacting
by  static roller,  including  cost  of  all  materials,  loading,
unloading,
stacking and labour etc. complete. Spec.No. : As directed by
Engineer  in charge.

Maintenance of WBM road including filling up of pot holes, r 0.00 0.00

uts
and rectifying corrugated surface, damaged edges and ravelli
ng etc. complete

The maintenance of drains include erosion, repair, 0.00 0.00

clearing,
cleaning, reshaping, regrading, deepening of side drains as w
ell as catch water drains etc. complete

Maintenance of Hume pipe Culvert by way of Clearing, Clean 0.00 0.00

ing,
Erosion repair, repairs to cracks, parapet wall and protection
work as per drawing etc. complete

Maintenance of road signs by way of cleaning and repainting 0.00 0.00

of
mandatory / requlatory / cautionary / informatory and place
identifications sign board as per drawings etc. complete

Maintenance of Kilometer stones, & 200 metre by way 0.00 0.00

of
refiting of tilted stones repairing with cement mortar, cleani
ng, repairing and lettering on 200 metre km stone and 5th
km stone etc. complete
Cutting of branches of trees and shrubs from the road way o 0.00 0.00
r
with in R.O.W including disposal of wood and leaves to suita
ble location etc. complete

Trimming of grass, shurbs and weeds from the shoulders/be 0.00 0.00

rms
and disposing off the same to suitable locations etc. complet
e

Maintenance of guard stones/ boundry stones/ indicator sto 0.00 0.00

nes
by way of refiting of tilted stones repairing with cement mor
tar, cleaning, repairing and white washing etc. complete

0.00 0.00
Repair of steel railing to bring it to original shape cleaning an
d repainting as per drawing etc. complete

0.00 0.00
Repair of RCC railing to bring it to the original shape, cleanin
g and repainting as per drawings etc. complete

0.00 0.00
Removal of steel railing and refixing of railing to submersible
bridges including cleaning and repainting etc complete

White washing two coats on parapet walls and white washin 0.00 0.00

g
and geru lime painting to tree trunks including preparation o
f surface by cleaning scraping etc. complete

Dressing of side shoulder / Scrapping the road side shoulder 0.00 0.00

by
Mechanical means ( By JCB /DOUZER) including excavation o
f raised  side  shoulders  upto  15cm  depth  including
remooving
/cutting bushes,grass and dressing shoulder to desired camb
er and  disposing  of  excavated  stuff  up  to  road  boundary
etc complete. as directed by Engineer In Charge.
Providing and Laying Pressure Sensitive Technology ( PST ) 0.00 0.00
based Insstapattch ready mix compound for repair potholes,
manufactured from aggregates of 4
12 mm, treated with special grade  bitumen,  Pressure
Sensitive  Polymer(  PSP)  and  Cross Linking  Chemical  (CLC)
agents  etc,  technically  evaluated  for
repairs on bitumenous/concrete surfaces, confirming to CRRI
&
IRC accreduted norms for pressure sensitive polymer produc
ts
for repairs of Potholes on road/ Pavements, havinfg upto 25
mm thick  insstapattch  layer  on  base  of  compacted
aggregates  ( Crusher  Brocken  )  of  50mm  thickness
including  labours,
material, tools and tampering etc complete.

Providing, laying and rolling Micro seal surfacing ( 10 mm thi 0.00 0.00

ck ) for preventive maintainance including supplying all mate
rials , preparing  the  existing  road  surface  ,  heating
bitumen  ,
aggregates , lime in hot mix plant , laying the mix seal surfaci
ng
by paver finisher and compaction by power roller etc comple
te.
( Using 60/70 bulk bitumen for mixing and tack coat over bla
ck topped surface by using 0.14 Cum per 10 Sqm. of crusher
aggregate  passing  100  %  through  6.30  mm  sieve  and
retained100 % on 0.075 mm size sieve 0.2 Kg / Sqm lime and
11.00 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg / Sqm
for tack coat ) Spec: As directed by Engineer In Charge and IR
C SP 78   2008
Providing, laying and rolling Micro seal surfacing ( 10 mm thi 0.00 0.00
ck ) for preventive maintainance including supplying all mate
rials , preparing  the  existing  road  surface  ,  heating
bitumen  ,
aggregates , lime in hot mix plant , laying the mix seal surfaci
ng
by paver finisher and compaction by power roller etc comple
te.
( Using 60/70 bulk bitumen for mixing and tack coat over bla
ck topped surface by using 0.14 Cum per 10 Sqm. of crusher
aggregate  passing  100  %  through  9.50  mm  sieve  and
retained100 % on 0.075 mm size sieve 0.2 Kg / Sqm lime and
9.50 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg / Sqm
for tack coat ) Spec: As directed by Engineer In Charge & IRC
SP 78  2008

Providing and laying shoulder drain of trap rubble of 0.45 x 0.00 0.00

0.45 meter section at 45 degree angle to the road edge
including hand packing, filling voids with sand/shingle of
approved quality and ramming etc. complete as desired.

Providing rubble filling of trap/ granite/ quartzite gneiss sto 0.00 0.00

nes
for foundations including hand packing filling gravel / sand i
n the voids etc. complete.

Providing and laying in situ cement concrete of M10 proporti 0.00 0.00

on with  trap/  granite/  quartzite/  gneiss  metal  in
foundation including  necessary  form  work,  compacting
and  curing  etc.
complete. (with reversible drum rtype mixer with SCADA wit
h crushed sand)
Providing  and  laying  in  situ  cement  concrete  of  1:4:8 0.00 0.00
proportion  with  trap/  granite/  quartzite/  gneiss  metal  in
foundation  including  necessary  form  work,  compacting
and
curing etc. complete. (with reversible drum rtype mixer with
SCADA with natural sand)

Providing and laying in situ cement concrete of 1:4:8 0.00 0.00

proportion with trap/ granite/ quartzite/ gneiss metal in
foundation including necessary form work, compacting
and
curing etc. complete. (with reversible drum rtype mixer with
SCADA with crushed sand)

Providing rubble stone paving 15cm thick in 1:3 cement mor 0.00 0.00

tar over a bedding of 15cm thick cement concrete of
1:4:8
proportion with trap /granite /quartzite /gneiss metal includ
ing striking joints and watering etc. complete.

Providing uncoursed rubble trap /quartzite /gneiss stone 0.00 0.00

masonary in cement mortar 1:5 for piers, abutments, wings,
returns, head
walls, parapet etc. including bailing out of water,
striking joints of the non exposed faces, pointing the expose
d faces with cement mortar 1:3, scaffolding, watering to
masonary and etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

2 class of 450mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

2 class of 600mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

2 class of 800mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.
Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00
2 class of 900mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

2 class of 1000mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

2 class of 1200mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

3 class of 600mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

3 class of 800mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

3 class of 900mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

3 class of 1000mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

3 class of 1200mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

4 class of 900mm diameter in proper line, level and
slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.
Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00
4 class of 1000mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP 0.00 0.00

4 class of 1200mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 a
nd curing etc. complete.

Providing cast in situ block of M10 cement concrete 0.00 0.00

with circular  or  other  shaped  opening  for  waterway
including necessary  formwork,  compaction,  finishing  and
curing  etc.
complete. (with reversible drum type mixer with SCADA wit
h natural sand, cement 4.05 bags/cumt)

Providing cast in situ block of M10 cement concrete 0.00 0.00

0.00 0.00
Providing selected hard murum filling including laying in laye
rs
of 15 to 20cmwith watering and compacting etc. complete.

Providing and laying in situ M15 cement concrete of 0.00 0.00

trap /granite  /quartzite  /gneiss  metal  for  approach  slab
including compacting,  finishing,  curing  etc.  complete.
(excluding reinforcement)  (with  reversible  drum  type
mixer  with  SCADA
with natural sand, cement 5.90 bags/cumt)

Providing and laying in situ M15 cement concrete of 0.00 0.00

Providing and fixing stream lined M15 grade RCC guard ston 0.00 0.00

e including mild steel bar reinforcement etc. complete.
Providing cast in situ M10 grade cement concrete for head w 0.00 0.00
alls
of CD work / retaining walls etc. including necessary form w
ork,
compaction, finishing and curing etc. complete. (with reversi
ble
drum type mixer with SCADA with natural sand, cement 4.05
bags/cumt)

Providing cast in situ M10 grade cement concrete for head w 0.00 0.00

alls
of CD work / retaining walls etc. including necessary form w
ork,
compaction, finishing and curing etc. complete. (with reversi
ble
drum type mixer with SCADA with crushed sand, cement 4.0
5 bags/cumt)

Providing and casting in situ PCC M15 grade of trap metal for 0.00 0.00

coping to head walls / parapet including centering, form wor
k, compaction and curing etc. complete. (with reversible
drum type mixer with SCADA with natural sand)

Providing and casting in situ PCC M15 grade of trap metal for 0.00 0.00

coping to head walls / parapet including centering, form wor
k, compaction and curing etc. complete. (with reversible
drum type mixer with SCADA with crushed sand)

Excavation for foundation by manual means in earth, soils of 0.00 0.00

all
types, sand, gravel, soft murum including shoring and strutti
ng
as necessary and disposing off excavated stuff as directed etc
. complete.

Excavation for foundation by mechanical means in earth, soil 0.00 0.00

s of all types, sand, gravel, soft murum including shoring and
strutting as necessary and disposing off excavated stuff
as directed etc. complete.

Excavation for foundation by manual means in hard murum 0.00 0.00

including shoring and strutting as necessary and disposing o
ff excavated stuff as directed etc. complete.
Excavation for foundation by mechanical means in hard mur 0.00 0.00
um
including shoring and strutting as necessary and disposing o
ff excavated stuff as directed etc. complete.

Excavation for foundation by manual means in hard murum 0.00 0.00

and boulders including shoring and strutting as
necessary and
disposing off excavated stuff as directed etc. complete.

Excavation for foundation by mechanical means in hard mur 0.00 0.00

um
and boulders including shoring and strutting as necessary an
d disposing off excavated stuff as directed etc. complete.

Excavation for foundation by manual means in soft rock 0.00 0.00

including shoring and strutting as necessary and disposing o
ff excavated stuff as directed etc. complete.

Excavation for foundation by mechanical means in soft rock 0.00 0.00

including shoring and strutting as necessary and disposing o
ff excavated stuff as directed etc. complete.

Excavation for foundation in hard rock by blasting including 0.00 0.00

shoring and strutting as necessary and disposing off excavate
d stuff as directed etc. complete.

Excavation for foundation in hard rock by controlled blasting 0.00 0.00

including shoring and strutting as necessary and disposing o
ff excavated stuff as directed etc. complete.

Excavation for foundation in hard rock by chiselling and 0.00 0.00

wedging  or  line  drilling  including  shoring  and  strutting
as necessary  and  disposing  off  excavated  stuff  as
directed  etc. complete. (excluding dewatering)

Excavation for foundation in laterite rock including shoring a 0.00 0.00

nd strutting as necessary and disposing off excavated
stuff as directed etc. complete.

Providing and fixing 25mm diameter steel anchor dowel in h 0.00 0.00

ard
rock including drilling hole of 32 mm diameter up to 0.75 mt
rs
depth, placing the dowel in position and effectively grouting
the hole with CM 1:1 proportion etc. complete.
Dewatering  for  abutments  including  diversion  of  stream, 0.00 0.00
providing  cofferdams,  bunds  etc.  as  may  be  necessary
for
foundation and other parts of the work including bailing and
pumping  out  water  during  and  after  excavation  as  may
be
necessary etc. complete. (excavation, bedding, soling, PCC a
nd concreting in all sorts of soil after post monsoon flow)

Dewatering for piers including diversion of stream, providing 0.00 0.00

cofferdams, bunds etc. as may be necessary for foundation a
nd other parts of the work including bailing and
pumping out
water during and after excavation as may be necessary etc.
complete. (excavation, bedding, soling, PCC and concreting i
n all sorts of soil after post monsoon flow)

Dewatering for returns including diversion of stream, providi 0.00 0.00

ng
cofferdams, bunds etc. as may be necessary for foundation a
nd other parts of the work including bailing and
pumping out
water during and after excavation as may be necessary etc.
complete. (excavation, bedding, soling, PCC and concreting i
n all sorts of soil after post monsoon flow)

Dewatering for rafts and cut off walls including diversion of 0.00 0.00

stream, providing cofferdams, bunds etc. as may be necessar
y
for foundation and other parts of the work including bailing
and pumping out water during and after excavation as may b
e
necessary etc. complete. (excavation, bedding, soling, PCC a
nd concreting in all sorts of soil after post monsoon flow)
Dewatering  for  abutments  including  diversion  of  stream, 0.00 0.00
providing  cofferdams,  bunds  etc.  as  may  be  necessary
for
foundation and other parts of the work including bailing and
pumping  out  water  during  and  after  excavation  as  may
be
necessary etc. complete. (excavation, bedding, soling, PCC a
nd concreting in all sorts of soil in perinnial river)

Dewatering for piers including diversion of stream, providing 0.00 0.00

Dewatering for returns including diversion of stream, providi 0.00 0.00

Dewatering for rafts and cut off walls including diversion of 0.00 0.00

stream, providing cofferdams, bunds etc. as may be necessar
y
for foundation and other parts of the work including bailing
and pumping out water during and after excavation as may b
e
necessary etc. complete. (excavation, bedding, soling, PCC a
nd concreting in all sorts of soil in perinnial river)
Dewatering on BHP basis by using water pump including 0.00 0.00
diversion of stream, providing cofferdams, earthern bunds et
c.
as may be necessary for foundation and other parts of the th
e
works and pumping out water during and after excavation as
may be required by using 3.0 BHP pump etc. complete. (prio
r approval of Superintending Engineer will be necessary)

Dewatering on BHP basis by using water pump including 0.00 0.00

diversion of stream, providing cofferdams, earthern bunds et
c.
as may be necessary for foundation and other parts of the th
e
works and pumping out water during and after excavation as
may be required by using 5.0 to 9.0 BHP pump etc. complete
.
(prior approval of Superintending Engineer will be necessary
)

Dewatering on BHP basis by using water pump including 0.00 0.00

diversion of stream, providing cofferdams, earthern bunds et
c.
as may be necessary for foundation and other parts of the th
e
works and pumping out water during and after excavation as
may be required by using 10.0 to 19.0 BHP pump etc.
complete. (prior approval of Superintending Engineer will be
necessary)

Providing and laying in situ M10 cement concrete of 0.00 0.00

trap/ granite/  quartzite/  gneiss  metal  in  foundation
including
necessary centering, formwork, bailing out water, compactin
g
and curing etc. complete. (with fully automatic micro proces
sor
based PLC with SCADA enabled with reversible drum type mi
xer with natural sand)
Providing  and  laying  in  situ  M10  cement  concrete  of   0.00 0.00
trap/ granite/  quartzite/  gneiss  metal  in  foundation
including
necessary centering, formwork, bailing out water, compactin
g
and curing etc. complete. (with fully automatic micro proces
sor
based PLC with SCADA enabled with reversible drum type mi
xer with crushed sand)

Providing uncoursed rubble stone masonry of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal in CM 1:5 for
foundation of piers,
abutments, wings etc. including bailing out of water, striking
joints, scaffolding and watering etc. complete.

Providing, fabricating, launching, floating and grounding 0.00 0.00

in
position steel curbs for wells with necessary steel bracings a
nd steel cutting edges as shown in the detailed
drawings and technical specifications etc. complete.

Providing and laying in situ CC M10 of trap/ granite/ quartzit 0.00 0.00

e/ gneiss metal in the hollow of the steel curbs
including
compacting by vibrating and curing etc. complete. (with fully
automatic micro processor based PLC with SCADA enabled w
ith reversible drum type mixer with natural sand)

Providing and laying in situ CC M10 of trap/ granite/ quartzit 0.00 0.00

Providing, fabricating and setting out MS cutting edge for RC 0.00 0.00

C
well curbs as per detailed drawings and technical specificatio
ns etc. complete.
Providing and laying in situ M20 RCC work with trap/ granite 0.00 0.00
/ quartzite/ gneiss metal in well steining including
shuttering,
compacting by vibrating, finishing and curing etc. complete.
(fully automatic micro processor based PLC with SCADA ena
bled
with reversible drum type mixer with natural sand, excludin
g reinforcement)

Providing and laying in situ M20 RCC work with trap/ granite 0.00 0.00

Providing and laying in situ M25 RCC work with trap/ granite 0.00 0.00

Providing and laying in situ M20 RCC work with trap/ granite 0.00 0.00

/ quartzite/  gneiss  metal  in  well  steining  including
shuttering,
compacting by vibrating, finishing and curing etc. complete.
(fully automatic micro processor based PLC with SCADA ena
bled concrete  batch  mix  plant  /  pan  mixer  with  natural
sand, excluding reinforcement)
Providing and laying in situ M20 RCC work with trap/ granite 0.00 0.00
/ quartzite/  gneiss  metal  in  well  steining  including
shuttering,
compacting by vibrating, finishing and curing etc. complete.
(fully automatic micro processor based PLC with SCADA ena
bled concrete  batch  mix  plant  /  pan  mixer  with  crushed
sand, excluding reinforcement)

Providing and laying in situ M25 RCC work with trap/ granite 0.00 0.00

Sinking of wells upto 5.0 metres diameter for 0.00 0.00

foundation
through all strata (except rock) to be removed by grabbing a
nd
chiselling soft disintegrated rock including blasting, large scal
e
dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including rem
oval
of obstacle and use of necessary plant and machinery, divers
etc. and proper seating of the wells etc. complete. (depth 0 t
o 5 metre) i) Add 30% extra for depth 5 to 10 m ii) Add 40%
extra for depth 10 to 15 m iii) Add 60% extra for depth 15 to
20 m iv) Add 100% extra for depth above 20 m
Sinking of wells above 5.0 metres and upto 6.0 metres diam 0.00 0.00
eter
for foundation through all strata (except rock) to be removed
by grabbing and chiselling soft disintegrated rock
including
blasting, large scale dewatering, heavy chiselling, cutting by
pneumatic tools, all materials available to sink through such
strata including removal of obstacle and use of necessary pla
nt
and machinery, divers etc. and proper seating of the wells et
c.
complete. (depth 0 to 5 metre) i) Add 30% extra for depth 5 t
o 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60%
extra for depth 15 to 20 m iv) Add 100% extra for depth abo
ve 20 m

Sinking of wells above 6.0 metres and upto 7.0 metres diam 0.00 0.00

eter
for foundation through all strata (except rock) to be removed
by grabbing and chiselling soft disintegrated rock
including
blasting, large scale dewatering, heavy chiselling, cutting by
pneumatic tools, all materials available to sink through such
strata including removal of obstacle and use of necessary pla
nt
and machinery, divers etc. and proper seating of the wells et
c.
complete. (depth 0 to 5 metre) i) Add 30% extra for depth 5 t
o 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60%
extra for depth 15 to 20 m iv) Add 100% extra for depth abo
ve 20 m
Sinking of wells above 7.0 metres and upto 8.0 metres diam 0.00 0.00
eter
for foundation through all strata (except rock) to be removed
by grabbing and chiselling soft disintegrated rock
including
blasting, large scale dewatering, heavy chiselling, cutting by
pneumatic tools, all materials available to sink through such
strata including removal of obstacle and use of necessary pla
nt
and machinery, divers etc. and proper seating of the wells et
c.
complete. (depth 0 to 5 metre) i) Add 30% extra for depth 5 t
o 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60%
extra for depth 15 to 20 m iv) Add 100% extra for depth abo
ve 20 m

Sinking of wells above 8.0 metres and upto 9.0 metres diam 0.00 0.00

eter
for foundation through all strata (except rock) to be removed
by  grabbing  and  chiselling  soft  disintegrated  rock
including
blasting, large scale dewatering, heavy chiselling, cutting by
pneumatic tools, all materials available to sink through such
strata including removal of obstacle and use of necessary pla
nt
and machinery, divers etc. and proper seating of the wells et
c.
complete. (depth 0 to 5 metre) i) Add 30% extra for depth 5 t
o 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60%
extra for depth 15 to 20 m iv) Add 100% extra for depth abo
ve 20 m
Sinking  of  wells  above  9.0  metres  and  upto  10.0  metres 0.00 0.00
diameter for foundation through all strata (except rock) to b
e removed  by  grabbing  and  chiselling  soft  disintegrated
rock including  blasting,  large  scale  dewatering,  heavy
chiselling, cutting  by  pneumatic  tools,  all  materials
available  to  sink
through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seatin
g of the wells etc. complete. (depth 0 to 5 metre) i) Add 30%
extra for depth 5 to 10 m ii) Add 40% extra for depth 10 to 1
5
m iii) Add 60% extra for depth 15 to 20 m iv) Add 100% extra
for depth above 20 m

Extra charges for sinking of various diameter of well founda 0.00 0.00

tion
in hard rock encountered during sinking by chiselling in wate
r etc. complete.

Providing steel anchor dowel bars of 32 mm diameter and 4 0.00 0.00

m
length at the base of the well including drilling holes of 60 m
m diameter up to 2.5 m depth in rock, placing the dowels in
position and effectively grouting the holes with CM 1:1 etc.
complete.

Providing steel anchor dowel bars of 32 mm diameter and 4 0.00 0.00

m length  through  steining  of  the  wells  including
provision  of necessary  ducts  through  staining,  drilling
holes  of  60  mm
diameter up to 2.5 m depth in rock, placing the dowels in
position and effectively grouting the holes with CM 1:1 etc.
complete.
Providing and laying in situ M15 CC of trap/ granite /quartzit 0.00 0.00
e
/gneiss metal for the bottom plugs of wells in the dry conditi
on including  compaction  and  curing  wherever  necessary
etc.
complete. (with fully automatic micro processor based PLC
with
SCADA enabled with reversible drum type mixer with natura
l sand)

Providing and laying in situ M15 CC of trap/ granite /quartzit 0.00 0.00

e /gneiss  metal  for  the  bottom  plugs  of  wells  under
water including  compaction  and  curing  wherever
necessary  etc.
complete. (with fully automatic micro processor based PLC
with
SCADA enabled with reversible drum type mixer with natura
l sand)

Providing and laying in situ M15 CC of trap/ granite /quartzit 0.00 0.00

e
/gneiss metal for the bottom plugs of wells in the dry conditi
on including compaction and curing wherever necessary
etc.
complete. (with fully automatic micro processor based PLC
with
SCADA enabled concrete batch mix plant / drum mixer with
natural sand)
Providing and laying in situ M15 CC of trap/ granite /quartzit 0.00 0.00
e
/gneiss metal for the bottom plugs of wells in the dry conditi
on including compaction and curing wherever necessary
etc.
complete. (with fully automatic micro processor based PLC
with
SCADA enabled concrete batch mix plant / drum mixer with
crushed sand)

Providing and laying in situ controlled grade of M15 of trap / 0.00 0.00

Providing and laying in situ controlled grade of M20 of trap / 0.00 0.00

granite /quartzite /gneiss metal for RCC works in cut off wall
s / curtain  walls  including  necessary  scaffolding,
centering, compacting  by  vibrator,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled  with  reversible  drum  type  mixer  with  crushed
sand, excluding reinforcement)
Providing and laying in situ controlled grade of M25 of trap / 0.00 0.00
granite /quartzite /gneiss metal for RCC works in cut off wall
s / curtain  walls  including  necessary  scaffolding,
centering, compacting  by  vibrator,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled  with  reversible  drum  type  mixer  with  natural
sand, excluding reinforcement)

Providing and laying in situ controlled grade of M25 of trap / 0.00 0.00

Providing and laying in situ controlled grade of M15 of trap / 0.00 0.00

granite /quartzite /gneiss metal for RCC works in cut off wall
s / curtain  walls  including  necessary  scaffolding,
centering, compacting  by  vibrator,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer with crushed
sand, excluding reinforcement)
Providing and laying in situ controlled grade of M20 of trap / 0.00 0.00
granite /quartzite /gneiss metal for RCC works in cut off wall
s / curtain  walls  including  necessary  scaffolding,
centering, compacting  by  vibrator,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer with natural s
and, excluding reinforcement)

Providing and laying in situ controlled grade of M20 of trap / 0.00 0.00

Providing and laying in situ controlled grade of M25 of trap / 0.00 0.00

granite /quartzite /gneiss metal for RCC works in cut off wall
s / curtain  walls  including  necessary  scaffolding,
centering, compacting  by  vibrator,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer with crushed
sand, excluding reinforcement)
Providing islands of earth or approved material for laying ste 0.00 0.00
el
curb or cutting edge of well for two lane bridge, depth upto
3
metre in standing water and necessary caging for protection
etc. complete.

Providing islands of earth or approved material for laying ste 0.00 0.00

el
curb or cutting edge of well for single lane bridge, depth upt
o
3 metre in standing water and necessary caging for protectio
n etc. complete.

Providing and fixing neoprene bearing as per detailed drawi 0.00 0.00

ngs etc. complete.
Providing tar paper bearing including laying in proper positio 0.00 0.00
n etc. complete.
Providing and laying 0.90 meter thick metal mat consisting o 0.00 0.00
f rubble,  oversize  metal  and  normal  size  metal  in
specified thickness  as  per  detailed  drawing  including
supplying  all
materials, hand packing of rubble, spreading metal in layers
and
hard murum including watering and compaction with power
roller etc. complete.

Providing, cutting, bending, hooking, tying and laying in 0.00 0.00

position TMT FE 500 steel bars for reinforcement for all RCC
works as per detailed drawings etc. complete.

Providing and joining 25 mm diameter MS / TMT FE 500 stee 0.00 0.00

l reinforcement bars by bottle nuts including supplying
and fitting them in position etc. complete.

Providing and joining 32 mm diameter MS /TMT FE 500 steel 0.00 0.00

reinforcement bars by bottle nuts including supplying
and fitting them in position etc. complete.

0.00 0.00
Providing welded joints for 25 mm and below diameter bars
for steel reinforcement etc. complete.

0.00 0.00
Providing welded joints for 32 mm and below diameter bars
for steel reinforcement etc. complete.
Providing  and  fixing  in  position  to  the  exact  profile  and 0.00 0.00
prestressing  the  high  tensile  strands  to  specified
ultimate
strength, standard end anchorages, cable ducts, grouting duc
ts
after prestressing and bearing plates with wedges as per det
ailed drawings  including  necessary  plant  and  machinery
for prestressing etc. complete.

Providing and laying in situ M20 controlled cement concrete 0.00 0.00

Providing and laying in situ M25 controlled cement concrete 0.00 0.00

of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement etc. complete. (height up to 4 meter with fully
automatic  micro  processor  based  PLC  with  SCADA
enabled reversible drum type mixer with natural sand)
Providing and laying in situ M25 controlled cement concrete 0.00 0.00
of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement etc. complete. (height up to 4 meter with fully
automatic  micro  processor  based  PLC  with  SCADA
enabled reversible drum type mixer with crushed sand)

Providing and laying in situ M30 controlled cement concrete 0.00 0.00

Providing and laying in situ M20 controlled cement concrete 0.00 0.00

of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement etc. complete. (height up to 4 meter with fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant / pan mixer with crushed sand)
Providing and laying in situ M20 controlled cement concrete 0.00 0.00
of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement etc. complete. (height up to 6 meter with fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant i pan mixer and crushed sand)

Providing and laying in situ M25 controlled cement concrete 0.00 0.00

of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement etc. complete. (height up to 4 meter with fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant / pan mixer with crushed sand)
Providing and laying in situ M30 controlled cement concrete 0.00 0.00
of
trap/ granite/ quartzite/ gneiss metal for RCC work in solid/
deck slab etc. including ramming, vibrating, curing, formwor
k, centering  and  finishing  in  cement  plaster  excluding
reinforcement  etc.  complete.  (with  fully  automatic  micro
processor based PLC with SCADA enabled concrete batch mi
x
plant / pan mixer and natural sand) i) Height up to 5 m, nor
mal
rate. ii) Depth 5 to 10 m, add 30 percent extra. iii) Depth 10 t
o 15 m, add 40 percent extra. iv) Depth 15 to 20 m, add 60
percent extra. v)  Depth  20  m  and  above,  add  100
percent extra.

Providing and laying in situ M30 controlled cement concrete 0.00 0.00

Providing and laying in situ M20 controlled cement concrete 0.00 0.00

Providing and laying in situ M25 controlled cement concrete 0.00 0.00

Providing and laying in situ M30 controlled cement concrete 0.00 0.00

Providing and laying in situ M20 controlled cement concrete 0.00 0.00

Providing and laying in situ M25 controlled cement concrete 0.00 0.00

Providing and laying in situ M30 controlled cement concrete 0.00 0.00

of
trap/ granite/ quartzite/ gneiss metal for RCC work in main/
cross  girders,  diaphrams  etc.  including  ramming,
vibrating, curing,  formwork,  centering  and  finishing  in
cement  plaster excluding reinforcement etc.  complete.
(with  fully  automatic
micro processor based PLC with SCADA enabled concrete bat
ch
mix plant / pan mixer with natural sand) i) height up to 5 m,
normal rate. ii) Depth 5 to 10 m, add 30 percent extra. iii)
Depth 10 to 15 m, add 40 percent extra. iv) Depth 15 to 20 m
, add 60 percent extra. v)  Depth  20  m  and  above,  add
100 percent extra.
Providing and laying in situ M30 controlled cement concrete 0.00 0.00
of
trap/ granite/ quartzite/ gneiss metal for RCC work in main/
cross  girders,  diaphrams  etc.  including  ramming,
vibrating, curing,  formwork,  centering  and  finishing  in
cement  plaster excluding reinforcement etc.  complete.
(with  fully  automatic
micro processor based PLC with SCADA enabled concrete bat
ch
mix plant / pan mixer with crushed sand) i) height up to 5 m,
normal rate. ii) Depth 5 to 10 m, add 30 percent extra. iii)
Depth 10 to 15 m, add 40 percent extra. iv) Depth 15 to 20 m
, add 60 percent extra. v)  Depth  20  m  and  above,  add
100 percent extra.

Providing and laying buried type expansion joint (expansion 0.00 0.00

gap being 20mm) covered with 12mm thick 200 mm
wide
galvinised weldable structural steel plate as per IS 2062 plac
ed
symmetrically to the centre line of the joint, resting freely ov
er
the top surface of the deck concrete, welding of 8mm diame
ter
100mm long galvanised nails spaced 300mm intervals along
the
centre line of the plate, all as specified in MoRTH clause 260
4 etc. complete.

0.00 0.00
Providing copper plate expansion joints as per detailed draw
ing No. 4/D 1 of 1972 D type etc. complete.

Providing expansion joints with 25mm thick bituminous pad 0.00 0.00

as per detailed drawings etc. complete.
Providing  and  laying  in  situ  1:4:8  cement  concrete  of   0.00 0.00
trap /granite  /quartzite  /gneiss  metal  for  haunch  filling
including
compacting, curing, mixing etc. complete. (with fully automa
tic
micro processor based PLC with SCADA enabled with reversi
ble drum type mixer with natural sand)
Providing  and  laying  in  situ  1:4:8  cement  concrete  of   0.00 0.00
trap /granite  /quartzite  /gneiss  metal  for  haunch  filling
including
compacting, curing, mixing etc. complete. (with fully automa
tic
micro processor based PLC with SCADA enabled with reversi
ble drum type mixer with crushed sand)

Providing trap/ granite/ quartzite/ gneiss rubble filling 0.00 0.00

over
haunches and arches including hand packing etc. complete.

Providing and laying in situ M20 CC of trap/ granite/ quartzit 0.00 0.00

e/ gneiss metal for wearing course of 8cm thick
including
compacting, finishing, curing and filling in joints with bitume
n
etc. complete. (with fully automatic micro processor based P
LC with SCADA enabled with reversible drum type mixer
with natural sand)

Providing and laying in situ M20 CC of trap/ granite/ quartzit 0.00 0.00

e/ gneiss metal for wearing course 8cm thick including
compacting, finishing, curing and filling in joints with bitume
n
etc. complete. (with fully automatic micro processor based P
LC
with SCADA enabled concrete batch mix plant / pan mixer w
ith crushed sand)
Providing vent holes 100mm diameter GI pipe in the slab an 0.00 0.00
d
wearing course with iron grill at the top and GI pipe at botto
m as per drawing etc. complete.

Providing and laying in situ M20 RCC of trap/ granite/ quartz 0.00 0.00

ite/ gneiss  metal  for  RCC  work  of  ballast  walls,  kerbs
and  box
returns including scaffolding, compaction, formwork finishin
g
and curing etc. complete. (excluding reinforcement, with full
y automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant / pan mixer with crushed sand)
Providing RCC parapet with CC M20 of trap/ granite/ quartzi 0.00 0.00
te/
gneiss metal with cast in situ/precast panels as per the detai
led drawing  including  reinforcement,  scaffolding,
centering, formwork,  compacting,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled with reversible drum type mixer)

Providing RCC parapet with CC M20 of trap/ granite/ quartzi 0.00 0.00

te/
gneiss metal with cast in situ/precast panels as per the detai
led drawing  including  reinforcement,  scaffolding,
centering, formwork,  compacting,  finishing  and  curing
etc.  complete.
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer)

Providing railing of mild steel angle post 2.0m center to cent 0.00 0.00

er
of section 75mm x 75mm x 10mm or equivalent I/C section
of
height 1.05 above bridge surface with minimum anchor leng
th
of 30cm including hold fast of 25mm diameter MS bar welde
d
at the bottom and concreting of 1:3:6 of size 30cm x 30cm x
30cm with three rows of 40mm B class GI pipe provided at
30cm on center to center including scaffolding and one coat
of
anticorrosive paint with two coats of oil painting, curing of
concrete etc. complete.

Providing RCC railing of cast in situ RCC posts with M20 CC of 0.00 0.00

trap/ granite/ quartzite/ gneiss metal for horizontal and ver
tical members  as  per  detailed  drawings  including
reinforcement, scaffolding,  centering,  formwork,
compaction,  finishing  and
curing with watering chemical compound etc. complete. (full
y
automatic micro processor based PLC with SCADA enabled w
ith reversible drum type mixer)
Providing  100mm  diameter  GI  water  spouts  as  per   0.00 0.00
detailed
drawings in RCC slab and wearing surface / kerb etc. complet
e.

Providing and casting special grade in M35 controlled cemen 0.00 0.00

t
concrete for prestressed concrete work for main girder inclu
ding
slab, cross girder etc. including centering and scaffolding or
launching including necessary plant and machinery for the jo
b shuttering,  vibrating,  curing,  finishing  etc.  complete.
(fully automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant or pan mixer with natural sand)
Providing and casting special grade in M35 controlled cemen 0.00 0.00
t
concrete for prestressed concrete work for main girder inclu
ding
slab, cross girder etc. including centering and scaffolding or
launching including necessary plant and machinery for the jo
b shuttering,  vibrating,  curing,  finishing  etc.  complete.
(fully automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant or pan mixer with crushed sand)

Excavation for foundation of structure as per drawing 0.00 0.00

Providing M30 RCC cast in situ 450mm diameter bored piles 0.00 0.00

Excavation for foundation of structure as per drawing 0.00 0.00

and
technical specifications including setting out, construction of
shoring , brushing, removal of stumps and other deleterious
matter,  dressing  of  side  and  bottom  and  back  filling
with
approved material etc. complete. (in marshy soil up to 3.00
meter depth by mechanical means)
Providing M30 RCC cast in situ 475mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and filling annular space around footing in rock by 0.00 0.00

using concrete of M15 grade etc. complete.
Providing M30 RCC cast in situ 500mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

0.00 0.00
Providing and filling sand in foundation trenches as per draw
ing and technical specifications etc. complete.

Providing M30 RCC cast in situ 525mm diameter bored piles 0.00 0.00

Providing M30 RCC cast in situ 550mm diameter bored piles 0.00 0.00

Providing stone masonry work in cement mortar 1:3 in 0.00 0.00

foundation with watering complete as per drawings and
technical specifications etc. complete. (random rubble maso
nry)

Providing M30 RCC cast in situ 600mm diameter bored piles 0.00 0.00

Providing and laying PCC in M15 grade levelling course of 10 0.00 0.00

0
mm thick below pile cap with fully automatic micro processo
r PLC  with  SCADA  enabled  reversible  drum  type  mixer
etc. complete.
Providing M30 RCC cast in situ 625mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing Ist class brick masonry work in 1:3 in sub structure 0.00 0.00

complete with watering as per drawings and technical
specifications etc. complete. (excluding pointing and
plastering)

Providing M30 RCC cast in situ 650mm diameter bored piles 0.00 0.00

Providing stone masonry work in cement mortar 1:3 0.00 0.00

with watering for substructure complete as per drawings
and
technical specifications etc. complete. (random rubble maso
nry)

Providing M30 RCC cast in situ 750mm diameter bored piles 0.00 0.00

Providing M30 RCC cast in situ 800mm diameter bored piles 0.00 0.00

Providing stone masonry work in cement mortar 1:3 0.00 0.00

with watering  for  substructure  complete  as  per  drawings
and technical  specifications  etc.  complete.  (ashler
masonry,  first sort)

Providing M30 RCC cast in situ 825mm diameter bored piles 0.00 0.00

Providing weep holes in brick masonry /plain 0.00 0.00

/reinforced concrete  abutment,  wing  wall  /  return  wall
with  100mm diameter  AC  pipe  extending  through  the
full  width  of  the
structure with slope of 1V: 20H towards drawing face as per
drawings and technical specifications etc. complete.
Providing M30 RCC cast in situ 900mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Back filling behind abutment, wing wall and return wall as p 0.00 0.00

er drawings and technical specifications etc. complete.
(by granular material)

Providing M30 RCC cast in situ 975mm diameter bored piles 0.00 0.00

Back filling behind abutment, wing wall and return wall as p 0.00 0.00

er
drawings and technical specifications etc. complete. (by sand
y material)

Providing M30 RCC cast in situ 1000mm diameter bored pile 0.00 0.00

s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.
Providing  and  laying  of  filter  media  with  granular   0.00 0.00
materials/
stone crushed aggregates satisfying the requirements laid do
wn
in clause 2504.2.2 of MoRTH specifications to a thickness of
not less than 600 mm with smaller size towards the soil and
bigger  size  towards  the  wall  and  provided  over  the
entire
surface behind abutment, wing wall and return wall to the f
ull height  compacted  to  a  firm  condition  as  per  drawing
and technical specifications etc. complete.

Providing M30 RCC cast in situ 1050mm diameter bored pile 0.00 0.00

Supplying, fitting and fixing in position true to line and level 0.00 0.00

cast steel rocker bearing conforming to IRC:83 (Pt
1) section IX and  clause  2003  of  MoRTH  specifications
including  all accessories  as  per  drawings  and  technical
specifications  etc. complete.

Providing M30 RCC cast in situ 1100mm diameter bored pile 0.00 0.00

Providing M30 RCC cast in situ 1200mm diameter bored pile 0.00 0.00

Supplying, fitting and fixing in position true to line and level 0.00 0.00

sliding plate bearing with PTFE surface sliding on stainless st
eel including  all  accessories  as  per  drawings  and
technical specifications and  BS:5400,  section  9.1  and  9.2
and  clause 2004 of MoRTH specifications etc. complete.

Providing M30 RCC cast in situ 1500mm diameter bored pile 0.00 0.00

Supplying, fitting and fixing in position true to line and level 0.00 0.00

elastomeric bearing including all accessories as per drawing
and technical specifications and IRC:83 (Pt
II) section IX and clause
2005 of MoRTH specifications etc. complete.
Providing M30 RCC cast in situ 450mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Supplying, fitting and fixing in position true to line and level 0.00 0.00

sliding plate bearing with stainless steel plate sliding on stai
nless
steel plate with mild steel matrix including all accessories as
per drawings and technical specifications etc. complete.

Providing M30 RCC cast in situ 475mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Supplying, fitting and fixing in position true to line and level 0.00 0.00
POT  PTFE bearing consisting of a metal piston supported by
a
disc or unreinforced elastomer confined within a metal cylin
der,
sealing rings, dust seals, PTFE surface sliding against stainles
s
steel mating surface, complete assembly to be of cast steel /
fabricated structural steel, metal and elastomer elements to
be as  per  IRC:  83  part  I  and  II  respectively  and  other
parts
conforming to BS:5400, section 9.1 and 9.2 and clause 2006
of MoRTH specifications as per drawing and approved techni
cal specifications etc. complete.

Providing M30 RCC cast in situ 500mm diameter bored piles 0.00 0.00

Providing and laying cement concrete wearing coat M30 gra 0.00 0.00

de including reinforcement as per drawings and technical
specifications etc. complete.

Providing M30 RCC cast in situ 525mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing and laying 12mm thick mastic asphalt wearing cou 0.00 0.00
rse
on top of deck slab excluding prime coat with paving grade
bitumen  meeting  the  requirements  given  in  table  500 29,
prepared by using mastic cooker and laid to required level a
nd slope  after  cleaning  the  surface  including  providing
antiskid surface  with  bitumen  precoated  fine  grained
hard  stone
chipping of 9.5 mm nominal size at the rate of 0.005 cum per
10 Sqm and at an approximate spacing of 10 cm center to
center  in  both  directions,  pressed  into  surface  when  the
temperature of surfaces not less than 100 deg C, protruding
1 mm  to  4mm  over  mastic  surface  as  per  clause  515
etc. complete.

Providing M30 RCC cast in situ 550mm diameter bored piles 0.00 0.00

Construction of precast RCC railing of M30 Grade, aggregate 0.00 0.00

size not exceeding 12 mm, true to line and grade, tolerance
of vertical  RCC  post  not  to  exceed  1  in  500,  centre  to
centre
spacing between vertical post not to exceed 2000 mm, leavi
ng adequate  space  between  vertical  post  for  expansion
as  per
approved drawings and technical specifications etc. complet
e.
Providing M30 RCC cast in situ 600mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Construction of RCC railing of M30 Grade in situ with 20 mm 0.00 0.00

nominal  size  aggregate  true  to  line  and  grade,  tolerance
of vertical  RCC  post  not  to  exceed  1  in  500,  center  to
center
spacing between vertical post not to exceed 2000 mm, leavi
ng
adequate space between vertical post for expansion, comple
te
with fully automatic micro processor PLC with SCADA enable
d reversible  drum  type  mixer  as  per  approved  drawings
and technical specifications etc. complete.

Providing M30 RCC cast in situ 625mm diameter bored piles 0.00 0.00

Providing and laying in PCC M15 grade leveling course below 0.00 0.00

approach slab complete with fully automatic micro processo
r PLC  with  SCADA  enabled  reversible  drum  type  mixer
as  per drawings and Technical specifications etc. complete.
Providing M30 RCC cast in situ 650mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing and laying of RCC in M30 grade approach slab 0.00 0.00

including reinforcement and formwork complete with
fully
automatic micro processor PLC with SCADA enabled reversib
le
drum type mixer as per drawings and technical specification
s etc. complete.

Providing M30 RCC cast in situ 750mm diameter bored piles 0.00 0.00

Providing, transporting and placing in position precast 0.00 0.00

pretensioned  concrete  girders  as  per  drawings  and
technical specifications etc. complete.
Providing M30 RCC cast in situ 800mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing and applying two coat of water based cement pain 0.00 0.00

t
to un plastered concrete surface after cleaning the surface of
dirt, dust, oil, grease, efflorescence etc. complete. (applying
1 litre paint on 2 sqmt)

Providing M30 RCC cast in situ 825mm diameter bored piles 0.00 0.00

Providing and laying a burried expansion joint, expansion ga 0.00 0.00

p being  20  mm,  covered  with  12  mm  thick,  200  mm
wide galvanized  weldable  structural  steel  plate  as  per  IS:
2062,
placed symmetrical to center line of the joint, resting freely
over
the top surface of the deck concrete, welding of 8 mm diame
ter
100 mm long galvanised nails spaced 300 mm c/c along the
center line of the plate, all as specified in clause 2604 etc.
complete.
Providing M30 RCC cast in situ 900mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing and filling 20 mm thick compressible fibre board in 0.00 0.00

expansion joint complete as per drawings and technical
specifications etc. complete.

Providing M30 RCC cast in situ 975mm diameter bored piles 0.00 0.00

Providing and filling joint sealing compound with coarse san 0.00 0.00

d and 6% bitumen by weight as per drawings and
technical specifications etc. complete.

Providing M30 RCC cast in situ 1000mm diameter bored pile 0.00 0.00

s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing  and  laying  of  asphaltic  plug  joint  to  provide   0.00 0.00
for
horizontal movement of 25 mm and vertical movement of 2
mm, depth of joint varying from 75 mm to 100 mm, width
varying from 500 mm to 750 mm in traffic direction covered
with a closure plate of 200 mm X 6 mm of weldable structur
al steel  conforming  to  IS:2062,  asphaltic  plug  to  consist
of
polymer modified bitumen binder, carefully selected single s
ize
aggregate to 12.5mm nominal size and a heat resistant foam
caulking  /backer  rod  all  as  per  approved  drawings  and
specifications etc. complete.

Providing M30 RCC cast in situ 1050mm diameter bored pile 0.00 0.00

Providing and laying of an elastomeric slab steel 0.00 0.00

expansion joint,  catering  to  right  or  skew  in  less  than
20  degree,
moderately curved with maximum horizontal movement upt
o 50 mm  to  be  installed  by  the  manufacture  /  supplier
or  their authorized  representative  ensuring  compliance
to  the
manufactures instructions for installation for road and bridg
e
works as per approved drawings and standard specifications
etc. complete.
Providing M30 RCC cast in situ 1100mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing and laying of compression seal joint consisting of 0.00 0.00

steel armoured nosing at two edges of the joint gap suitably
anchored to the deck concrete and a preformed chloroprene
elastomer or closed cell foam joint sealer compressed and fi
xed
into the joint gap with special adhesive binder to cater for a
horizontal movement upto 40 mm and vertical movement of
3 mm etc. complete.

Providing M30 RCC cast in situ 1200mm diameter bored pile 0.00 0.00

Providing and laying of a strip seal expansion joint catering t 0.00 0.00

o
maximum horizontal movement upto 70 mm to be installed
by
the manufacturer / supplier to their authorized representati
ve ensuring  compliance  to  the  manufacturers  instruction
for installation  as  per  approved  drawings  and  standard
specifications etc. complete.
Providing M30 RCC cast in situ 1500mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing and laying boulders apron on river bed for protecti 0.00 0.00

on
against scour with stone boulders weighing not less than 40
kg
each complete as per drawings and Technical specifications e
tc. complete. (boulder laid without wire crates)

Providing M35 RCC cast in situ 450mm diameter bored piles 0.00 0.00

Providing and laying of boulder apron laid in wire crates ma 0.00 0.00

de
with 4 mm dia GI wire conforming to IS:2801 and IS:4828 in
100 mm X 100 mm mesh weaved diagonally including 10%
extra for laps and joints laid with stone boulder weighing no
t less than 40 kg each etc. complete.
Providing M35 RCC cast in situ 475mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and laying of apron with cement concrete blocks o 0.00 0.00

f
size 0.50X0.50X0.50m cast in situ and made with nominal mi
x
of M15 grade cement concrete with a minimum cement cont
ent
of 250kg/cum with fully automatic micro processor PLC with
SCADA enabled reversible drum type mixer as per IRC:21
2000 etc. complete.

Providing M35 RCC cast in situ 500mm diameter bored piles 0.00 0.00

Providing and laying pitching on slopes laid over prepared fil 0.00 0.00

ter media  including  boulder  apron  laid  dry  in  front  of
toe  of embankment  complete  as  per  drawing  and
technical specifications etc. complete. (by stone/boulder)
Providing M35 RCC cast in situ 525mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and laying pitching on slopes laid over prepared fil 0.00 0.00

ter media including boulder apron laid dry in front of
toe of
embankment complete with fully automatic micro processor
PLC
with SCADA enabled reversible drum type mixer as per draw
ings
and technical specifications etc. complete. (concrete blocks o
f size 0.30x 0.30x0.30m in CC M15 grade)

Providing M35 RCC cast in situ 550mm diameter bored piles 0.00 0.00

Providing and laying filter material underneath pitching 0.00 0.00

in slopes  as  per  drawings  and  technical  specifications
etc. complete.
Providing M35 RCC cast in situ 600mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Laying of a geotextile filter between pitching and embankme 0.00 0.00

nt slopes on which pitching is laid to prevent escape of
the
embankment material through the voids of the stone pitchin
g /
cement concrete blocks as well as to allow free movement o
f water without creating any uplift head on the pitching
etc. complete.

Providing M35 RCC cast in situ 625mm diameter bored piles 0.00 0.00

0.00 0.00
Providing and laying rubble stone flooring laid in cement mo
rtar
1:3 as per drawings and technical specifications etc. complet
e. MORT & H ?2500 Cubic Metre 4045 1250
Providing M35 RCC cast in situ 650mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and laying cement concrete blocks of M15 0.00 0.00

grade
flooring laid in cement mortar 1:3 as per drawings and techn
ical specifications etc. complete.

Providing M35 RCC cast in situ 750mm diameter bored piles 0.00 0.00

0.00 0.00
Construction of dry rubble flooring at cross drainage works e
tc. complete.

Providing M35 RCC cast in situ 800mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 825mm diameter bored piles 0.00 0.00

Providing M15 CC work for cast in situ curtain wall as 0.00 0.00

per drawing and technical specifications etc. complete.

Providing M35 RCC cast in situ 900mm diameter bored piles 0.00 0.00

Providing flexible apron of 100 cm thick comprising of loose 0.00 0.00

stone boulders weighing not less than 40 kg beyond curtain
wall etc. complete.
Providing M35 RCC cast in situ 975mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and construction of a gabian structure for retainin 0.00 0.00

g
earth with segments of wire crates of size 7.0 x 3.0 x 0.6m ea
ch
divided into 1.5 m compartments by cross netting, made for
m 4
mm galvansed steel wire @ 32kg per 10 sqm having minimu
m tensile strength of 300Mpa conforming to IS:280 and
galvanizing coating conforming to IS:4826 woven into mesh
with double twist, mesh size not exceeding 100x100mm, fill
ed
with boulders with least dimension of 200mm, all loose end
s to be tied with 4mm galvanized steel wire etc. complete.

Providing M35 RCC cast in situ 1000mm diameter bored pile 0.00 0.00

s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.
Providing  and  constructing  gabain  structures  for  erosion 0.00 0.00
control,  river  training  works  and  protection  works  with
wire
crates of size 2.0m x 1.0m x 0.30m each divided into 1 m
compartments by cross netting, made from 4 mm galvanized
steel wire @ 32 kg per 10sqm having minimum tensile stren
gth of  300Mpa  conforming  to  IS:280  and  galvanizing
coating
conforming to IS 4826, wovan into mesh with double twist,
mesh size not exceeding 100 x 100mm, filled with boulders
with least dimension of 200mm, all loose ends to be securel
y tied with 4mm galvanized steel wire etc. complete.

Providing M35 RCC cast in situ 1050mm diameter bored pile 0.00 0.00

Removal of existing 75mm thick cement concrete wearing co 0.00 0.00

at
including its disposal complete as per technical specification
without causing any detrimental effect to any part of the bri
dge
structure and removal of dismantled material with all lifts an
d lead up to 1000m etc. complete.
Providing M35 RCC cast in situ 1100mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Removal of existing asphaltic wearing coat comprising of 50 0.00 0.00

mm
thick asphaltic concrete laid over 12 mm thick mastic asphalt
including disposal with all lift and lead upto 100m etc.
complete.

Providing M35 RCC cast in situ 1200mm diameter bored pile 0.00 0.00

Providing and laying cement concrete wearing coat M30 gra 0.00 0.00

de with  batch  mix  type  concrete  mixer  with  SCADA
including
reinforcement as per drawings and technical specifications e
tc. complete.
Providing M35 RCC cast in situ 1500mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of reinforcement  including  placing  concrete  by
tremie
arrangement, compaction of concrete and withdrawal of ste
el shell  with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled with reversible drum type mixer etc. comple
te.

Providing and laying of reinforced cement concrete in 0.00 0.00

M30 grade approach slab including reinforcement and
formwork
complete with batch mix type concrete mixer with SCADA as
per drawings and technical specifications etc. complete.

Providing M35 RCC cast in situ 450mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 475mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 500mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing M35 RCC cast in situ 525mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 550mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 600mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing M35 RCC cast in situ 625mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 650mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 750mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing M35 RCC cast in situ 800mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 825mm diameter bored piles 0.00 0.00

each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 900mm diameter bored piles 0.00 0.00
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing M35 RCC cast in situ 975mm diameter bored piles 0.00 0.00

Providing M35 RCC cast in situ 1000mm diameter bored pile 0.00 0.00

s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 1050mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing M35 RCC cast in situ 1100mm diameter bored pile 0.00 0.00

Providing M35 RCC cast in situ 1200mm diameter bored pile 0.00 0.00

s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.
Providing M35 RCC cast in situ 1500mm diameter bored pile 0.00 0.00
s
each of load capacity as per design and of specified diamete
r of as  directed,  placed  through  steel  shell  sunk  to  the
required depth  through  all  strata  except  rock,  excluding
provision  of
reinforcement including placing concrete by tremie arrange
ment
compaction of concrete and withdrawal of steel shell with fu
lly automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant / pan mixer etc. complete.

Providing, placing and driving in position 6mm thick perman 0.00 0.00

ent
MS liner up to required depth with 12 mm thick MS cutting
edge of 0.50 meter length of bottom including
fabricating,
cutting the MS sheet to required diameter and shape, weldi
ng
the joints and driving with the help of required machineries,
all materials, labour and lift etc. complete.

Providing and injecting epoxy grout including structuring of 0.00 0.00

crack in the body of slab girder by sand blasting, fixing inlet
tube arrangement including cost of materials, machinery
required for the work and labour charges etc. complete.

Repairing of honey combed or spilling area by chipping out t 0.00 0.00

he
damaged spalled or honey combed portion of concrete up to
rusted rebars, cleaning of all rust, scale and loose materials,
scaffolding,  compressed  air  machinery  etc.  complete.
(item includes  use  of  air  compressor,  chipping  machine
and scaffolding for height 8 to 10 meter)
Providing and applying well mixed polymer cement slurry in 0.00 0.00
ratio 1:2 over well soaked but surface dry concrete and steel
rebar  for  adhesion  of  fresh  cement  and  sand  mortar  as
per
specification as directed etc. complete. (item includes use of
polymers  like  sikalatex  or  similar  materials  of  relevant
specification and scaffolding for height 8 to 10 meter)

Repairs of expansion joints by removing rich mix 0.00 0.00

cement
concrete including stacking the spoil as directed with all lead
s,
lifts etc. complete. (use of equipments like air compressor is
considered in the item)

Providing and laying M35 grade RCC jacketing work around t 0.00 0.00

he
existing piers of bridges etc. complete. (with fully automatic
micro processor based PLC with SCADA enabled with reversi
ble
drum type mixer with natural sand, height of 8 to 10 meter)

Providing and laying M35 grade RCC jacketing work around t 0.00 0.00

he
existing piers of bridges etc. complete. (with fully automatic
micro processor based PLC with SCADA enabled with reversi
ble
drum type mixer with crushed sand, height of 8 to 10 meter)

Providing and laying M35 grade RCC jacketing work around t 0.00 0.00

he
existing piers of bridges etc. complete. (with fully automatic
micro processor based PLC with SCADA enabled concrete bat
ch mix plant / pan mixer with natural sand, height of 8 to 10
meter)
Providing and laying M35 grade RCC jacketing work around t 0.00 0.00
he
existing piers of bridges etc. complete. (with fully automatic
micro processor based PLC with SCADA enabled concrete bat
ch
mix plant / pan mixer with crushed sand, height of 8 to 10
meter)

Providing and injecting epoxy grout including structuring of 0.00 0.00

cracks in the body of slab girder, fixing inlet tube arrangeme
nt
including cost of materials, machinery required for the work
labour charges etc. (2kg of grout is considered per hole)

Maintenance of bridge/slab type culverts by way of clearing, 0.00 0.00

cleaning, erosion repair, repairs to cracks, parapet walls and
protection works including painting of parapets / kerbs as pe
r drawing etc. complete.

Maintenance of causeway by way of minor surface 0.00 0.00

repairs,
replacing guide posts, repair of flood gauges, removal of deb
ris, providing boulders and protection work and painting
etc. complete.

Excavation for foundation in earth, soil of all types, sand, gra 0.00 0.00

vel
and soft murum, including removing the excavated material
up
to a distance of 50 m. beyond the building area & stacking a
nd
spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift upto 1.5
m.) By Manual Means
Excavation for foundation in earth, soil of all types, sand, gra 0.00 0.00
vel
and soft murum, including removing the excavated material
up
to a distance of 50 m. beyond the building area & stacking a
nd
spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift upto 1.5
m.) By Mechanical Means

Excavation for foundation in earth, soils of all types, 0.00 0.00

sand,gravel and soft murum, including removing the excavat
ed
material upto a distance of 50 meters beyond the building ar
ea
and stacking and spreading as directed, dewatering, prepari
ng
the bed for the foundation and necessary back filling, rammi
ng, watering including shoring and strutting etc.
complete. (Lift from 1.5m to 3.0m) By Manual Means

Excavation for foundation in earth, soils of all types, 0.00 0.00

sand,gravel and soft murum, including removing the excavat
ed
material upto a distance of 50 metres beyond the building ar
ea
and stacking and spreading as directed, dewatering, prepari
ng
the bed for the foundation and necessary back filling, rammi
ng, watering including shoring and strutting etc.
complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Excavation for foundation in hard murum including removin 0.00 0.00

g
the excavated material upto distance of 50 metres beyond th
e building area and stacking and spreading as directed,
dewatering, preparing the bed for the foundation and neces
sary
back filling, ramming, watering including shoring and strutti
ng etc. complete. (Lift upto 1.50 m) By Manual Means
Excavation for foundation in hard murum including removin 0.00 0.00
g
the excavated material upto distance of 50 metres beyond th
e building area and stacking and spreading as directed,
dewatering, preparing the bed for the foundation and neces
sary
back filling, ramming, watering including shoring and strutti
ng etc. complete. (Lift upto 1.50 m) By Mechanical Means

Excavation for foundation in hard murum including removin 0.00 0.00

g
the excavated material upto a distance of 50 metres beyond
the building area and stacking and spreading as directed,
dewatering, preparing the bed for the foundation and neces
sary
back filling, ramming, watering including shoring and strutti
ng etc. complete. (Lift from 1.5 to 3.0m) By Manual Means

Excavation for foundation in Hard murum including removin 0.00 0.00

g
the excavated material upto a distance of 50 metres beyond
the building area and stacking and spreading as directed,
dewatering, preparing the bed for the foundation and neces
sary
back filling, ramming, watering including shoring and strutti
ng
etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Excavation for foundation in hard murum and boulders 0.00 0.00

including removing the excavated material up to a distance 5
0
metres, beyond the building area and stacking and spreadin
g as
directed, dewatering, preparing the bed for the foundation a
nd
necessary back filling, ramming, watering including shoring a
nd
strutting etc. complete. (Lift upto 1.5m.) By Manual Means
Excavation for foundation in hard murum and boulders 0.00 0.00
including removing the excavated material up to a distance 5
0
metres, beyond the building area and stacking and spreadin
g as
directed, dewatering, preparing the bed for the foundation a
nd
necessary back filling, ramming, watering including shoring a
nd
strutting etc. complete. (Lift upto 1.5m.) By Mechanical Mea
ns

Excavation for foundation in hard murum and boulders 0.00 0.00

including removing the excavated material upto a distance o
f 50 metres, beyond the building area and stacking and
spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift from 1.5
m to 3.0 m.) By Manual Means

Excavation for foundation in Hard murum and boulders 0.00 0.00

Excavation for foundation in Soft rock and old cement or lim 0.00 0.00

e
masonry foundations including removing the excavated mat
erial
upto a distance of 50 metres beyond the building area and
stacking as directed, including dewatering, preparing the be
d for  the  foundation  and  necessary  back  filling  with
available earth  /murum,  ramming,  watering  including
shoring  and
strutting etc. complete (lift upto 1.5m) By Manual Means
Excavation for foundation in Soft rock and old cement or lim 0.00 0.00
e
masonry foundations including removing the excavated mat
erial
upto a distance of 50 metres beyond the building area and
stacking as directed, including dewatering, preparing the be
d for  the  foundation  and  necessary  back  filling  with
available earth  /murum,  ramming,  watering  including
shoring  and
strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lim 0.00 0.00

e
masonry foundations including removing the excavated mat
erial
upto a distance of 50 meters beyond the building area and
stacking as directed, including dewatering, preparing the be
d for  the  foundation  and  necessary  back  filling  with
available earth/murum,  ramming  ,watering  including
shoring  and
strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Manual
Means

Excavation for foundation in Soft rock and old cement or lim 0.00 0.00

e
masonry foundations including removing the excavated mat
erial
upto a distance of 50 metres beyond the building area and
stacking as directed, including dewatering, preparing the be
d for  the  foundation  and  necessary  back  filling  with
available earth/murum,  ramming  ,watering  including
shoring  and strutting  etc.  complete.  (Lift  from  1.5m  To
3.0  m.)  By Mechanical Means
Excavation for foundation in Hard rock by blasting including 0.00 0.00
trimming and leveling the bed by chiseling where necessary
and
removing the excavated material and stacking it in measurab
le
heaps within a distance of 50 metres from the building area
including  dewatering  and  back  filling  with  available
earth/murum,  watering,  ramming,  etc.  complete.  (Lift
upto 1.5m)

Excavation for foundation in Hard rock by blasting including 0.00 0.00

trimming and leveling the bed by chiselling where necessary
and  removing  the  excavated  material  and  stacking  it  in
measurable  heaps  within  a  distance  of  50  metres  from
the building  area  including  dewatering  and  back  filling
with
available earth/murum watering, ramming etc. complete. (Li
ft from 1.5m To 3.0 m)

Excavation for foundation in Hard rock by controlled blasting 0.00 0.00

including trimming and leveling the bed by chiselling where
necessary and removing the excavated material and stacking
it
in measurable heaps within a distance of 50 metres. from th
e building area including dewatering and back filling
with
available earth soil /murum watering, ramming etc. complet
e. (Lift upto 1.5m)

Excavation for foundation in Hard rock by chiselling, wedgin 0.00 0.00

g, line  drilling,  etc.  including  trimming  and  levelling  the
bed,
removing the excavated material upto a distance of 50 metre
s
beyond the building area stacking as directed, dewatering an
d
back filling with available earth/ murum watering, ramming
etc. complete. (Lift upto 1.5 m).
Excavation  for  foundation  in  laterite  rock  (soft  or  hard) 0.00 0.00
including trimming and levelling the bed for the foundation,
removing the excavated material up to a distance of 50 metr
es
beyond the building area, stacking as directed, dewatering a
nd back  filling  with  available  murum,  watering,  ramming
etc. complete. (Lift upto 1.5 m.)

Providing preconstructional antitermite treatment as per 0.00 0.00

I.S. 6313  (Part II)  by  treating  the  bottom  surface  and
sides  of
excavation at the rate of 5 litres of emulsion concentrate of 0
.5 percent  of  clorophyrifos  per  square  meter  of  surface
area
covering 10 years guarantee on bond paper. ( AS per Item no
. 22.41 of schedule of rates of NBO )

Providing preconstructional antitermite treatment as per 0.00 0.00

I.S. 6313 (Part
II) treatment by treating the backfill in immediate contact
with  foundation  at  the  rate  of  5  litres  of  emulsion
concentrate of 0.5 percent of clorophyrifos per square metre
of vertical  surface  area  covering  10  years  guarantee  on
bond
paper. ( AS per Item no. 22.42 of schedule of rates of NBO )

Providing preconstructional antitermite treatment as per 0.00 0.00

I.S. 6313 (Part
II) by treating the top surface of plinth filling at the rate  of
5  litres  of  emulsion  concentrate  at  0.5  percent  of
clorophyrifos per  square  metre  of  surface  area  covering
ten
years guarantee on bond paper. ( AS per Item no. 22.43 of
schedule of rates of NBO )
Providing  preconstructional  antitermite  treatment  as  per   0.00 0.00
I.S. 6313 (Part
I) to the soil along the external face of building by
punching holes of 1.2 of 1.5 C.M. diametre about 30  60 cm
deep at 15 cm c/c as close to the wall as possible & to inject
0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres
per
hole and sealing the same with proper filling & covering 10
years guarantee on bond paper. ( AS per Item no. 22.44 of
schedule of rates of NBO )

Providing antitermite treatment to the wooden frames 0.00 0.00

of
doors/windows of the existing building as per I.S. 6313 (Part
III) by drilling 6mm dia. holes at four corners on one side and
four corners on other side at a downward angle of about 45
degree at the junction of wood work and masonary and
injecting 150 ml. of chlorodane 5% W.C. and sealing by filling
putty etc. complete covering 2 years guarantee on bond pap
er.

Providing antitermite treatment to the joints of wooden 0.00 0.00

beams/joist used for the roof work of the existing building a
s per I.S. 6313 (Part III) by drilling 6mm dia. holes at a
downward angle of about 45 degree at the junction of wood
work and masonary and injecting 80 ml. of chlorodane 5%
W.C. and sealing by filling putty etc. complete covering 2 yea
rs guarantee on bond paper.
Providing antitermite treatment to the sides of flooring of th 0.00 0.00
e existing building as per I.S. 6313 (Part III) by punching holes
6mm dia. drilled at a distance of 30cm. centre to centre and
injecting one percent of chlorodane emulsion concentrate at
the
rate of 50 ml per hole and sealing by filling putty etc. comple
te covering 2 years guarantee on bond paper.

Providing antitermite treatment around the periphery of 0.00 0.00

the existing building as per I.S. 6313 (Part III) by
excavating
trenches of 20cm width and exposing the sides of columns a
nd
plinth beams upto a depth of 300mm and injecting one perc
ent
of chlorodane emulsion concentrate at the rate of 2.25 litres
per
Rmt and refilling the trenches etc. complete covering 2 years
guarantee on bond paper.

Providing general pest control services to the building to 0.00 0.00

control the nuisance of cockroaches, lizards, pin bores
and
other insects etc. with 4 operations in a year and monthly ch
eck up.

Providing general pest control services to small size of 0.00 0.00

inspection chamber to control the nuisance of
cockroaches during the year with monthly check up.

Providing general pest control services to big size of inspecti 0.00 0.00

on
chamber to control the nuisance of cockroaches during the y
ear with monthly check up.

Labour charges for removing grass, thorney shrubs, 0.00 0.00

Jungli shrub, Kubabul and alike grass along roadside
making the
ground clean by showel and phavaras etc. complete.

Removing grass, gazer grass and disposing off out of building 0.00 0.00

premises  including  making  clean  the  ground  by  shovel
and phavaras etc. complete.
Excavation  for  foundation  of  structure  as  per  drawing   0.00 0.00
and technical  specification  including  setting  out,
construction  of
shoring , brushing, removal of stumps and other deleterious
matter,  dressing  of  side  and  bottom  and  back  filling
with
approved material. Marshy Soil Spec. No.: M.O.R.T & H   304

Filling in plinth and floors with approved excavated material 0.00 0.00

in
15cm. to 20cm. layers including watering and compacting etc
. complete. Spec. No. : Bd.A. 11/Page No. 262

Filling in plinth and floors with contractors 0.00 0.00

material/brought
from outside and approved by Engineer incharge in layers of
15cm. to 20cm. including watering and compaction etc.
complete. Spec. No. : Bd.A. 11/Page No. 263

Providing dry/ trap/ granite/ quartzite/ gneiss rubble 0.00 0.00

stone soling 15 cm to 20 cm thick including hand
packing and compacting etc. complete.

Providing and filling in the foundation with sand of approve 0.00 0.00

d quality including watering, compacting etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer 0.00 0.00

including filling voids with Crushed sand/grit, ramming,
watering etc. complete.

Providing M 0.00 0.00

20 RCC cast in situ single rim bored pile of 225 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement, compaction of concr
ete including  chipping  and  dressing  including  chipping
and dressing if required etc. complete.
Providing M 0.00 0.00
20 RCC cast in situ single rim bored pile of 300 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 0.00 0.00

20 RCC cast in situ single rim bored pile of 380 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 0.00 0.00

20 RCC cast in situ single rim bored pile of 450 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 0.00 0.00

20 RCC cast in situ single rim bored pile of 535 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth through all strata except rock, excluding provision  of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.
Providing M 0.00 0.00
20 RCC cast in situ single rim bored pile of 600 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 0.00 0.00

25 RCC cast in situ single rim bored pile of 225 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing ?etc. complete.

Providing M 0.00 0.00

25 RCC cast in situ single rim bored pile of 300 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 0.00 0.00

25 RCC cast insitu single rim bored pile of 380 mm dia.  each
of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.
Providing M 0.00 0.00
25 RCC cast in situ single rim bored pile of 450 mm dia.
each  of  load  capacity  as  per  design  and  of  specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,excluding  provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 20 RCC cast in situ double rim bored pile of 225 0.00 0.00

Providing M 20 RCC cast insitu double rim bored pile of 300 0.00 0.00

mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth through all strata except rock,excluding provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.
Providing M 20 RCC cast in situ double rim bored pile of 380 0.00 0.00
mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth through all strata except rock,excluding provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 20 RCC cast in situ double rim bored pile of 450 0.00 0.00

Providing M 25 RCC cast in situ double rim bored pile of 225 0.00 0.00

mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.
Providing M 25 RCC cast in situ double rim bored pile of 300 0.00 0.00
mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.

Providing M 20 RCC cast insitu double rim bored pile of 300 0.00 0.00

Providing M 20 RCC cast in situ double rim bored pile of 380 0.00 0.00

mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth through all strata except rock,excluding provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.
Providing M 20 RCC cast in situ double rim bored pile of 450 0.00 0.00
mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth through all strata except rock,excluding provision
of
reinforcement including placing reversible drum type concre
te
mixer concrete by tremie arrangement compaction of concre
te including chipping and dressing etc. complete.

Providing M 25 RCC cast in situ double rim bored pile of 225 0.00 0.00

Providing M 25 RCC cast in situ double rim bored pile of 300 0.00 0.00

mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.
Providing M 25 RCC cast in situ double rim bored pile of 380 0.00 0.00
mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.

Providing M 25 RCC cast in situ double rim bored pile of 450 0.00 0.00

Providing M 25 RCC cast in situ double rim bored pile of 535 0.00 0.00

mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.
Providing M 25 RCC cast in situ double rim bored pile of 600 0.00 0.00
mm dia. each of load capacity as per design and of specified
diameter of pile and bulb as directed, sunk to the required
depth  through  all  strata  except  rock,  excluding  provision
of
reinforcement including placing concrete prepared in reversi
ble
drum type concrete mixer by tremie arrangement, compacti
on of  concrete  including  chipping  and  dressing  etc.
complete. Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  325  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete. .

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  350mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity  and  as  per  design  and  of  400  mm  diameter.or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  425mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  475mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity  and  as  per  design  and  of  500mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  525  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  550  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity  and  as  per  design  and  of  600  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  625  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  650  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity  and  as  per  design  and  of  750  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity and as per design and of 800 mm diameter. or as
directed placed through steel shells sunk to the required dep
th through all strata except rock excluding provision of
reinforcement as per detailed drawings and design approved
by the Engineer
in charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  825  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity  and  as  per  design  and  of  900  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity  and  as  per  design  and  of  975  mm  diameter  or
as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00

capacity and as per design and of 1000 mm diameter or as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.
Providing M 30 R.C.C. cast in situ bored piles each of load 0.00 0.00
capacity and as per design and of 1050 mm diameter or as
directed placed through steel shells sunk to the required dep
th through  all  strata  except  rock  excluding  provision  of
reinforcement as per detailed drawings and design approved
by the Engineer
in  charge including placing concrete by tremie
arrangements, compaction of concrete including chipping an
d dressing and withdrawal of shell etc. complete.

Chiseling through pile shells in hard strata like boulders, soft 0.00 0.00

and hard rocks Upto and inclusive of 550 mm diameter
including removing and stacking the loose materials etc.
complete and disposing of the unserviceable materials outsi
de complete. .

Chiseling through pile shells in hard strata like boulders, soft 0.00 0.00

and hard rocks Beyond 550 mm and upto and inclusive of 75
0
mm dia. including removing and stacking the loose materials
etc. complete and disposing of the unserviceable
materials outside complete.

Chiseling through pile shells in hard strata like boulders, soft 0.00 0.00

and hard rocks Beyond 750 mm and upto and inclusive of 90
0
mm dia including removing and stacking the loose materials
etc. complete and disposing of the unserviceable
materials outside complete.

Chiseling through pile shells in hard strata like boulders, soft 0.00 0.00

and hard rocks Beyond 900 mm and upto and inclusive of 10
50
mm dia. including removing and stacking the loose materials
etc.  complete  and  disposing  of  the  unserviceable
materials outside complete.
Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00
ng load  on  the  pile  in  driven  position  upto  400  mm
diameter including  construction  of  test  cap,  use  of
accessories  and instruments  including  providing  graphs
as  per  I.S.  code  or
Std.Specifications and dismantling the test cap after testing a
nd cleaning the site complete.

Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00

ng
load on the pile in driven position above 400 mm and upto t
o 550 mm diameter including construction of test cap, use of
accessories and instruments including providing graphs as p
er I.S. code or Std.Specifications and dismantling the
test cap after testing and cleaning the site complete.

Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00

ng
load on the pile in driven position above 550 mm and upto 6
50 mm  diameter  including  construction  of  test  cap,  use
of
accessories and instruments including providing graphs as p
er I.S.  code  or  Std.Specifications  and  dismantling  the
test  cap after testing and cleaning the site complete.

Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00

ng
load on the pile in driven position above 650 mm and upto 7
50 mm  diameter  including  construction  of  test  cap,  use
of
accessories and instruments including providing graphs as p
er I.S.  code  or  Std.Specifications  and  dismantling  the
test  cap after testing and cleaning the site complete.

Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00

ng
load on the pile in driven position above 750 mm and upto 8
25 mm  diameter  including  construction  of  test  cap,  use
of
accessories and instruments including providing graphs as p
er I.S.  code  or  Std.Specifications  and  dismantling  the
test  cap after testing and cleaning the site complete.
Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00
ng
load on the pile in driven position above 825 mm and upto 9
00 mm  diameter  including  construction  of  test  cap,  use
of
accessories and instruments including providing graphs as p
er I.S.  code  or  Std.Specifications  and  dismantling  the
test  cap after testing and cleaning the site complete.

Carrying out load test for 1.5 times the proposed safe worki 0.00 0.00

ng
load on the pile in driven position above 900 mm diameter
including  construction  of  test  cap,  use  of  accessories
and instruments  including  providing  graphs  as  per  I.S.
code  or
Std.Specifications and dismantling the test cap after testing a
nd cleaning the site complete.

Empty boring for 325 to 400 mm dia bored R.C.C. cast in situ 0.00 0.00

piles  including  withdrawal  of  shell,  removal  of  earth  to
a distance  of  50  metres  etc.  complete.  Spec  :(As
directed  by Engineer in Charge)

Empty boring for 425 to 500 mm dia. bored R.C.C. cast in situ 0.00 0.00

piles  including  withdrawal  of  shell,  removal  of  earth  to
a distance  of  50  metres  etc.  complete.  Spec  :(As
directed  by Engineer in Charge)

Empty boring for 525 to 600 mm dia. bored R.C.C. cast in situ 0.00 0.00

piles  including  withdrawal  of  shell,  removal  of  earth  to
a distance  of  50  metres  etc.  complete.  Spec  :(As
directed  by Engineer in Charge)

Empty boring for 625 to 700 mm dia. bored R.C.C. cast in situ 0.00 0.00

piles  including  withdrawal  of  shell,  removal  of  earth  to
a distance  of  50  metres  etc.  complete.  Spec  :(As
directed  by Engineer in Charge)

Empty boring for 725 to 1050 mm dia. bored R.C.C. cast in sit 0.00 0.00

u piles  including  withdrawal  of  shell,  removal  of  earth
to  a distance  of  50  metres  etc.  complete.  Spec  :(As
directed  by Engineer in Charge)

Chipping and dressing of the R.C.C. piles upto 0.60 0.00 0.00

meterincluding  cleaning  reinforcement  and  removal  of
dismantled materials upto a distance of 50 meter beyond th
e building area etc. for providing pile caps. Spec :
(As directed by Engineer in Charge
Providing bentonite slurry process for various diameter of pil 0.00 0.00
es vide  Item  Nos  1  (i  to  xxiv)  above.  Spec  :  (As
directed  by Engineer in Charge)

Providing placing and Driving in position 6 millimeter mild st 0.00 0.00

eel
liner for R.C.C. Piles upto required depth with 12mm thick m
ild steel  cutting  edge  of  0.50m  length  at  bottom
including
fabricating cutting the mild steel sheet to required diameter
and
shape ,welding the joints and driving with the help of requir
ed machineries  including  all  materials  labours  and  lifts
etc. complete  as  directed  by  the  Engineer  in  charge.
Upto  3.00 meter deep liner

Providing placing and Driving in position 6 millimeter mild st 0.00 0.00

Providing and casting in situ cement concrete M 20 of trap 0.00 0.00

Providing and casting in situ cement concrete M 25 of trap 0.00 0.00

metal for R.C.C. pile caps as per detailed designs and drawin
gs, including  bailing  out  water  manually,  centering,
formwork, compacting,  finishing  and  curing  etc.
complete.  (Excluding steel reinforcement) Spec. No.: BdF
1 Page No. 297
Providing and casting in situ cement concrete M 30 of trap 0.00 0.00
metal for R.C.C. pile caps as per detailed designs and drawin
gs, including  bailing  out  water  manually,  centering,
formwork, compacting,  finishing  and  curing  etc.
complete.  (Excluding steel reinforcement) Spec. No.: BdF
1 Page No. 297

Providing and casting in situ cement concrete M20 of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal for reinforced cement concr
ete
pile caps as per detailed design and drawing including bailin
g out  water  manually  ,  form  work,  compacting,  finishing
and curing  with  fully  automatic  microprocessor  based
PLC  with SCADA  enabled  reversible  drum  type  Mixer
etc.  complete.
(excluding steel reinforcement) Spec. No. Bd.F 1 Page No.297

Providing and casting in situ cement concrete M20 of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal for reinforced cement concr
ete
pile caps as per detailed design and drawing including bailin
g out  water  manually  ,  form  work,  compacting,  finishing
and curing  with  fully  automatic  microprocessor  based
PLC  with SCADA  enabled  concrete  Batch  mix  plant  (Pan
mixer)  etc
complete (excluding steel reinforcement) Spec. No. Bd.F 1 Pa
ge No.297

Providing and fabricating structural steel work in rolled secti 0.00 0.00

ons
like joists, channels, angles, tees etc. as per detailed design a
nd
drawings or as directed including cutting, fabricating, hoistin
g, erecting,  fixing  in  position  making  riveted  /  bolted
/welded connections  without  connecting  plates,  braces
etc.  and
including one coat of anticorrosive paint and over it two coat
s
of oil painting of approved quality and shade etc. complete.
Providing and fabricating structural steel work in rolled secti 0.00 0.00
ons,
fixed with connecting plates or angle cleats in main and cros
s beams,  hip  and  jack  rafters,  purlins  connecting  to  truss
members and the like, as per detailed designs and drawing o
r as
directed including cutting, fabricating, hoisting, erecting, fixi
ng
in position, making riveted/ bolted/ welded connections and
one coat of anticorrosive paint and over it two coats of oil
painting of approved quality and shade etc. complete.

Providing structural steel work in single stanchions compose 0.00 0.00

d of
R.S.J. Channel etc. with caps, bases, mild steel plated, angle
brackets, cleats, gusset plates, anchor bolts etc. as per detail
ed designs and drawings or as directed including cutting,
fabrication, hoisting, erecting fixing in position, making rivet
ed/
bolted/ welded connection and one coat of anticorrosive pai
nt and over it two. coats of oil painting approved quality and
shade etc. complete.

Providing structural steel work in trusses, other similar truss 0.00 0.00

ed
purlins and members with all bracing, gusset plates etc. as p
er
detailed designs and drawings or as directed including cuttin
g,
fabricating, hoisting, erecting fixing in position, Making rivet
ed/
bolted/ welded connection and one coat of anticorrosive pai
nt
and over it 2 coats of oil painting approved quality and shad
e etc. complete.
Providing and fixing 50 mm. dia. medium class G.I.pipe gate 0.00 0.00
with wicket gate of approved drawing with all fixtures & fitti
ngs
in two leaves with strong hold fast embedded in c.c. block at
top  &  bottom  with  locking  arrangement  including
cutting, bending,  making  holes  and  with  one  coat  of
primer  etc. complete.

Providing and erecting structural steel for sakav with all brac 0.00 0.00

ing
gusset plates etc. as per detailed design and drawing or as
directed including cutting, fabricating, hoisting, erecting, fixi
ng
in position, making riveted/ bolted/welded connection and
oil painting with 2 coats of approved quality and shade
etc. complete. complete.

Providing, fabricating and erecting at site of work the tubula 0.00 0.00

r
steel structure (shed) as per standard design and specificatio
ns
having various spans in between trusses and in multiples of
standard  length  of  bays  as  specified  as  per  standard
specifications, inclusive of cost of steel tubular trusses, tubul
ar
columns purlins, tie runners, foundation bolts, base plates, n
uts and  bolts,  welding  wherever  required  etc.  as  per
detailed
drawing inclusive of one coat of anticorrosive paint and two
coats  of  oil  painting  of  approved  quality  and  shade  etc.
complete. Spec. No. : As directed by Engineer in charge.

Providing Gas or Electrical welding for structural steel sectio 0.00 0.00

n, plates as per detailed drawing. For less than 10 mm
thick section.

Providing and fixing mild steel grill gate as per the detailed 0.00 0.00

drawing including hinges, locking arrangements and painting
in three  coats  of  oil  paint  of  approved  colour  and
shade  etc. complete.
(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As
directed by Engineer  in charge.
Providing and fixing mild steel grill gate with angle iron fram 0.00 0.00
e
65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and
diagonal  flats  as  per  the  detailed  drawing  including
hinges, pivot  blocks  locking  arrangement  welding,
revetting  with  oil
painting in three coats of approved colour shade. (Weight of
gate 35 kg/Sq.m.)

Providing structural steel work of rectangular hollow 0.00 0.00

steel
section for steel trusses, other similar trussed items like purl
in
and members with all bracing, gusset plates etc. as per detai
led designs  and  drawings  or  as  directed  including
cutting, fabricating,  hoisting,  erecting,  fixing  in  position
making riveted/bolted/  welded  connections  and  one
coat  of anticorrosive  paint  and  over  it  two  coats  of  oil
painting  of
approved quality and shade complete. Spec. No. : As directe
d by Engineer in charge.

Providing structural steel work in hollow section of 0.00 0.00

various
thickness and sizes in square, rectanular and round shape fr
om 25mm to 450mm section as per IS 4923 YST 310
Grade
produced from iron ore and blast furnace route etc. as per
detailed designs and drawing or as directed including cutting
, fabricating, hoisting, erecting, fixing in position, making
riveted/bolted/ welded connections and painting complete.

Providing and laying in situ, cement concrete in M 10 of trap/ 0.00 0.00

granite/  quartzite/  gneiss  metal  for  foundation  and
bedding
including bailing out water, formwork, compacting and curin
g
complete, with fully automatic micro processor based PLC wi
th
SCADA enabled reversible Drum Type mixer, With natural sa
nd.
Providing and laying in situ, cement concrete in M 10 of trap/ 0.00 0.00
granite/  quartzite/  gneiss  metal  for  foundation  and
bedding
including bailing out water, formwork, compacting and curin
g
complete with fully automatic micro processor based PLC wi
th SCADA  enabled  reversible  Drum  Type  mixer  .  With
crushed sand.

Providing and laying in situ cement concrete M 10 of trap / 0.00 0.00

granite / quartzite / gneiss metal for foundation and beddin
g including  dewatering,  form  work,  compacting,
roughening
them if special finish is to be provided, finishing if required a
nd curing  with  fully  automatic  microprocessor  based  PLC
with SCADA  enabled  concrete  Batch  mix  plant  (Pan
mixer)  etc. complete.

Providing and casting in situ cement concrete in M15 of trap 0.00 0.00

/ granite/quartzite/gneiss  metal  for  steps  including  steel
centering,  plywood/steel  formwork,  compacting,
roughening
them if special finish is to be provided, finishing uneven and
honeycombed surface and curing etc. complete. The Cement
Mortar  1:3  plaster  is  considered  for  rendering  uneven
and honeycombed  surface,  only.  Newly  laid  concrete
shall  be covered  by  gunny  bag,  plastic,  tarpaulin  etc.
(Wooden centering  will  not  be  allowed.),  with  fully
automatic  micro
processor based PLC with SCADA enabled reversible Drum Ty
pe mixer .. With Crushed sand.
Providing and casting in situ cement concrete in M20of trap/ 0.00 0.00
granite/quartzite/gneiss  metal  for  steps  including  steel
centering,  plywood/steel  formwork,  compacting,
roughening
them if special finish is to be provided, finishing uneven and
honeycombed surface and curing etc. complete. The Cement
Mortar  1:3  plaster  is  considered  for  rendering  uneven
and honeycombed  surface,  only.  Newly  laid  concrete
shall  be covered  by  gunny  bag,  plastic,  tarpaulin  etc.
(Wooden centering  will  not  be  allowed.),  with  fully
automatic  micro
processor based PLC with SCADA enabled reversible Drum Ty
pe mixer .. With Natural sand.

Providing and casting in situ cement concrete in M20 of trap 0.00 0.00

/ granite/quartzite/gneiss  metal  for  steps  including  steel
centering,  plywood/steel  formwork,  compacting,
roughening
them if special finish is to be provided, finishing uneven and
honeycombed surface and curing etc. complete. The Cement
Mortar  1:3  plaster  is  considered  for  rendering  uneven
and honeycombed  surface,  only.  Newly  laid  concrete
shall  be covered  by  gunny  bag,  plastic,  tarpaulin  etc.
(Wooden centering  will  not  be  allowed.),  with  fully
automatic  micro
processor based PLC with SCADA enabled reversible Drum Ty
pe mixer .. With Crushed sand.
Providing and casting in situ cement concrete in M15 of trap 0.00 0.00
/
granite/quartzite/gneiss metal for bed blocks, foundation bl
ocks
and such other items including bailing out water, plywood/st
eel
formwork, compacting, roughening them if special finish is t
o
be provided, finishing uneven and honeycombed surface an
d curing  etc.  complete.  The  Cement  Mortar  1:3  plaster  is
considered  for  rendering  uneven  and  honeycombed
surface only.  Newly  laid  concrete  shall  be  covered  by
gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.),
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer . . With natural sand.

Providing and casting in situ cement concrete in M15 of trap 0.00 0.00

/
granite/quartzite/gneiss metal for bed blocks, foundation bl
ocks
and such other items including bailing out water, plywood/st
eel
formwork, compacting, roughening them if special finish is t
o
be provided, finishing uneven and honeycombed surface an
d curing  etc.  complete.  The  Cement  Mortar  1:3  plaster  is
considered  for  rendering  uneven  and  honeycombed
surface only.  Newly  laid  concrete  shall  be  covered  by
gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.),
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer . . With crushed sand.
Providing and casting in situ cement concrete in M20 of trap 0.00 0.00
/
granite/quartzite/gneiss metal for bed blocks, foundation bl
ocks
and such other items including bailing out water, plywood/st
eel
formwork, compacting, roughening them if special finish is t
o
be provided, finishing uneven and honeycombed surface an
d curing  etc.  complete.  The  Cement  Mortar  1:3  plaster  is
considered  for  rendering  uneven  and  honeycombed
surface only.  Newly  laid  concrete  shall  be  covered  by
gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.),
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer . . With Natural sand.

Providing and casting in situ cement concrete in M20 of trap 0.00 0.00

/
granite/quartzite/gneiss metal for bed blocks, foundation bl
ocks
and such other items including bailing out water, plywood/st
eel
formwork, compacting, roughening them if special finish is t
o
be provided, finishing uneven and honeycombed surface an
d curing  etc.  complete.  The  Cement  Mortar  1:3  plaster  is
considered  for  rendering  uneven  and  honeycombed
surface only.  Newly  laid  concrete  shall  be  covered  by
gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.),
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer . . With crushed sand.
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap /
granite /quartzite/ gneiss metal for arches including skew ba
cks as  per  detailed  drawing  or  as  directed  in
superstructure including  centering,  form  work,
compacting,  finishing  with
minimum thickness of 1:3 cement plaster to give a smooth a
nd even  surface  or  roughening  them  if  special  finish  is
to  be
provided and curing and finishing if required complete, with
fully automatic micro processor based PLC with SCADA enabl
ed
reversible Drum Type mixer . complete, . With natural sand.

Providing and casting in situ cement concrete in M 0.00 0.00

20 of trap /
granite /quartzite/ gneiss metal for arches including skew ba
cks as  per  detailed  drawing  or  as  directed  in
superstructure including  centering,  form  work,
compacting,  finishing  with
minimum thickness of 1:3 cement plaster to give a smooth a
nd even  surface  or  roughening  them  if  special  finish  is
to  be
provided and curing and finishing if required complete, with
fully automatic micro processor based PLC with SCADA enabl
ed
reversible Drum Type mixer etc. complete, With Crushed San
d.
Providing and casting in situ cement concrete in M15 of trap 0.00 0.00
/
granite/quartzite/gneiss metal for plain or molded sills, corn
ice, jambs,  block  in  course,  or  architraves  of  required
size  and shapes  including  steel  centering,  plywood/steel
formwork, compacting,  roughening  them  if  special  finish
is  to  be provided,finishing  uneven  and  honeycombed
surface  and curing  etc.  complete.  The  Cement  Mortar
1:3  plaster  is considered  for  rendering  uneven  and
honeycombed  surface only.  Newly  laid  concrete  shall  be
covered  by  gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.)
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer etc. complete, With Nat
ural Sand.

Providing and casting in situ cement concrete in M20 of trap 0.00 0.00

/
granite/quartzite/gneiss metal for plain or molded sills, corn
ice, jambs,  block  in  course,  or  architraves  of  required
size  and shapes  including  steel  centering,  plywood/steel
formwork, compacting,  roughening  them  if  special  finish
is  to  be provided,finishing  uneven  and  honeycombed
surface  and curing  etc.  complete.  The  Cement  Mortar
1:3  plaster  is considered  for  rendering  uneven  and
honeycombed  surface only.  Newly  laid  concrete  shall  be
covered  by  gunny  bag,
plastic, tarpaulin etc. (Wooden centering will not be allowed
.)
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer etc. complete, With Nat
ural Sand.
Providing and casting in situ cement concrete M 15 of trap/ 0.00 0.00
granite/quartzite/gneiss metal for coping to plinth or parape
t,
moulded or chamfered as per drawing or as directed includi
ng steel  centering,  plywood/steel  formwork  compacting,
roughening them if special finish is to be provided, finishing
uneven and honeycombed surface and curing etc. complete.
The  Cement  Mortar  1:3  plaster  is  considered  for
rendering
uneven and honeycombed surface only. Newly laid concrete
shall be covered by gunny bag, plastic, tarpaulin etc. (Woode
n centering will not be allowed.)

Providing and casting in situ cement concrete as per IS 2185 0.00 0.00

1967 hollow block 200mm x 200mm x 400mm in
cement
mortar 1:6 for superstructure including curing, scaffolding an
d cement pointing from outside etc. complete.

Providing and reconstructing 1:5:10 cement concrete 0.00 0.00

solid
block 300mm x 200mm x 150mm in cement mortar 1:6 for
external block masonry with scaffolding, curing etc. complet
e.

Providing and laying 50 mm thick layer in cement mortar 1:8 0.00 0.00

below  plinth  beam  including  floating,  watering,  curing
and
leveling and ramming the bed if necessary before laying the
layer etc. complete.
Providing and laying in situ cement concrete M 20 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, With f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer . With natural sand.

Providing and laying in situ cement concrete M 20 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel ) etc. etc. complete, With
fully automatic micro processor based PLC with SCADA enabl
ed
reversible drum type concrete mixer. . With Crushed sand.
Providing and laying in situ cement concrete M 25 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork ,cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, With f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer.. With natural sand.

Providing and laying in situ cement concrete M 25 of trap / 0.00 0.00

Providing and laying in situ cement concrete M 30 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, With f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer. With natural sand.
Providing and laying in situ cement concrete M 30 of trap / 0.00 0.00
granite /quartzite/ gneiss ?
metal for R.C.C. work in foundations like  raft,  strip
foundations,  grillage  and  footings  of  R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, With f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer. With Crushed sand.

Providing and laying in situ cement concrete M 35 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, With f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer.. With Crushed sand.
Providing and laying in situ cement concrete M 40 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement  and  structural  steel)  etc.  complete  With
fully automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer. With Natural sand.

Providing and laying in situ cement concrete M 40 of trap / 0.00 0.00

Providing and laying in situ cement concrete M 20 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement and structural steel) etc. etc. complete, with f
ully automatic  micro  processor  based  PLC  with  SCADA
enabled concrete batch mix plant With Natural Sand
Providing and laying in situ cement concrete M 20 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C.
columns and steel stanchions etc. including bailing out water
,
formwork, cover blocks compaction and curing roughening t
he surface  if  special  finish  is  to  be  provided  (Excluding
reinforcement  and  structural  steel)  etc.  complete,  with
fully automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant (pan mixer).. . With Crushed sand..
.

Providing and laying in situ cement concrete M 25 of trap / 0.00 0.00

Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawings  or  as  directed  including
centering,
formwork, cover blocks compacting and roughening if specia
l finish is to be provided and curing etc. complete. (Excluding
reinforcement and structural steel).with fully automatic micr
o
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 30 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete. (Excluding  reinforcement  and  structural
steel  ).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 30 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 35 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 35 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete. (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete. (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. work in foundatio
ns like  raft,  strip  foundations,  grillage  and  footings  of
R.C.C. columns  and  steel  stanchions  etc.  columns  as  per
detailed designs  and  drawing  or  as  directed  including
centering, formwork,  cover  blocks  compaction  finishing
the  formed surfaces  with  cement  mortar  1:3  of
sufficient  minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete. (Excluding  reinforcement  and  structural  steel).
with  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 20 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete. (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With Natural sand.

Providing and casting in situ cement concrete M 20 of trap / 0.00 0.00

Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per detailed  designs  and  drawings  or  as  directed
including
centering, formwork, cover blocks compacting and rougheni
ng
if special finish is to be provided and curing etc. complete.
(Excluding reinforcement).With fully automatic micro proces
sor
based PLC with SCADA enabled reversible drum type concret
e mixer With natural sand.
Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per detailed  designs  and  drawings  or  as  directed
including
centering, formwork, cover blocks compacting and rougheni
ng
if special finish is to be provided and curing etc. complete.
(Excluding  einforcement  and  structural  steel).With  fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer With Crushed sand.

Providing and casting in situ cement concrete M 30 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per detailed  designs  and  drawings  or  as  directed
including
centering, formwork, cover blocks compacting and rougheni
ng
if special finish is to be provided and curing etc. complete.
(Excluding  reinforcement  and  structural  steel).  With  fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
reversible drum type concrete mixer With Crushed sand.
Providing and casting in situ cement concrete M 35 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With Natural sand

Providing and casting in situ cement concrete M 35 of trap / 0.00 0.00

Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  ?cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With natural sand.
Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  ?cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
With  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
reversible drum type concrete mixer With Crushed sand.

Providing and casting in situ cement concrete M 20 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per detailed  designs  and  drawings  or  as  directed
including
centering, formwork, cover blocks compacting and rougheni
ng
if special finish is to be provided and curing etc. complete.
(Excluding  reinforcement  and  structural  steel).with  fully
automatic  micro  processor  based  PLC  with  SCADA
enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00

Providing and casting in situ cement concrete M 30 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.
Providing and casting in situ cement concrete M 30 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcementand  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.

Providing and casting in situ cement concrete M 35 of trap / 0.00 0.00

granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00
granite  /quartzite/  gneiss  metal  for  R.C.C.  columns  as
per
detailed designs and drawing or as directed including centeri
ng, formwork,  cover  blocks  compaction  finishing  the
formed surfaces  with  cement  mortar  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 40 of trap / 0.00 0.00

Providing & casting in situ cement concrete M 20 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel). Wi
th
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With Crushed sand.
Providing and casting in situ cement concrete in M 0.00 0.00
25 of trap/
granite/ quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs and drawings or as directed
including
centering, formwork, cover blocks compaction and rougheni
ng
the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel).Wit
h
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With natural sand.

Providing and casting in situ cement concrete in M 0.00 0.00

Providing & casting in situ cement concrete M 30 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per  detailed  designs  &  drawings  or  as  directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete.  (Excluding  reinforce mentand  structural
steel).With
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With natural sand.
Providing & casting in situ cement concrete M 30 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per  detailed  designs  &  drawings  or  as  directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel).Wit
h
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With Crushed sand.

Providing & casting in situ cement concrete M 35 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding .reinforcement and structural steel).Wi
th
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With Crushed sand.
Providing & casting in situ cement concrete M 40 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel). Wi
th
fully automatic micro processor based PLC with SCADA enabl
ed reversible drum type concrete mixer With natural sand.

Providing & casting in situ cement concrete M 40 of trap / 0.00 0.00

Providing & casting in situ cement concrete M 20 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel). wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With natural sand.
Providing & casting in situ cement concrete M 20 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel). wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With Crushed sand..

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap/
granite/ quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs and drawings or as directed
including
centering, formwork, cover blocks compaction and rougheni
ng
the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel). wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing & casting in situ cement concrete M 30 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel).wit
h
fully automatic micro processor based PLC with SCADA enabl
ed concrete batch mix plant (pan mixer).... ?
With natural sand.

Providing & casting in situ cement concrete M 30 of trap / 0.00 0.00

Providing & casting in situ cement concrete M 35 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel).wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With natural sand
Providing & casting in situ cement concrete M 35 of trap / 0.00 0.00
granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per detailed designs & drawings or as directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel).wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With Crushed sand.

Providing & casting in situ cement concrete M 40 of trap / 0.00 0.00

granite /quartzite/ gneiss metal for R.C.C. beams and lintels
as per  detailed  designs  &  drawings  or  as  directed
including
centering, formwork, cover blocks compaction & roughening
the surface if special finish is to be provided & curing etc.
complete. (Excluding reinforcement and structural steel).wit
h
fully automatic micro processor based PLC with SCADA enabl
ed
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 20 of trap/ 0.00 0.00
granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With natural sand.

Providing and casting in situ cement concrete M 20 of trap/ 0.00 0.00

Providing and casting in situ cement concrete M 25 of trap/ 0.00 0.00

granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With natural sand.
Providing and casting in situ cement concrete M 25 of trap/ 0.00 0.00
granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy,  waist  slab  with  steps  as  per  detailed  designs
and drawings  including  centering,  formwork,  cover  blocks
compaction finishing the formed surfaces with cement mort
ar
1:3 of sufficient minimum thickness to give a smooth and ev
en
surface or roughening if special finish is to be provided and
curing  etc.  complete,(Excluding  reinforcement  and
structural steel).  With  fully  automatic  micro  processor
based  PLC  with SCADA  enabled  reversible  drum  type
concrete  mixer  With Crushed sand

Providing and casting in situ cement concrete M 30 of trap/ 0.00 0.00

granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With natural sand.
Providing and casting in situ cement concrete M 30 of trap/ 0.00 0.00
granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With Crushed sand

Providing and casting in situ cement concrete M 35 of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
With  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
reversible drum type concrete mixer With Crushed sand.
Providing and casting in situ cement concrete M 40 of trap/ 0.00 0.00
granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).With  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
reversible drum type concrete mixer With natural sand.

Providing and casting in situ cement concrete M 40 of trap/ 0.00 0.00

Providing and casting in situ cement concrete M 20 of trap/ 0.00 0.00

granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.
Providing and casting in situ cement concrete M 20 of trap/ 0.00 0.00
granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.

Providing and casting in situ cement concrete M 25 of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
with  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing and casting in situ cement concrete M 30 of trap/ 0.00 0.00
granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural
steel).with  fully automatic  micro  processor  based  PLC
with  SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.

Providing and casting in situ cement concrete M 30 of trap/ 0.00 0.00

Providing and casting in situ cement concrete M 35 of trap/ 0.00 0.00

granite / quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
with  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
concrete batch mix plant (pan mixer).... With natural sand.
Providing and casting in situ cement concrete M 35 of trap/ 0.00 0.00
granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
with  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.

Providing and casting in situ cement concrete M 40 of trap/ 0.00 0.00

granite/ quartzite/ gneiss metal for R.C.C. slabs and landings
canopy  as  per  detailed  designs  and  drawings  including
centering,  formwork,  cover  blocks  compaction  finishing
the
formed surfaces with cement mortar 1:3 of sufficient minim
um
thickness to give a smooth and even surface or roughening if
special  finish  is  to  be  provided  and  curing  etc.
complete, (Excluding  reinforcement  and  structural  steel).
with  fully automatic  micro  processor  based  PLC  with
SCADA  enabled
concrete batch mix plant (pan mixer).... With Crushed sand.
Providing  &  casting  in  situ  cement  concrete  M 20  of   0.00 0.00
trap/
granite/ quartzite/ gneiss metal for R.C.C. chajja as per detail
ed
design & drawings including centering, formwork, cover bloc
ks compacting , curing , finishing & roughening the surface if
special finish is to be provided & curing complete. (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With natural sand.

Providing & casting in situ cement concrete M 20 of 0.00 0.00

Providing & casting in situ cement concrete M 25 of 0.00 0.00

trap/
granite/ quartzite/ gneiss metal for R.C.C. chajja as per detail
ed
design & drawings including centering, formwork, cover bloc
ks compacting , curing , finishing & roughening the surface if
special finish is to be provided & curing complete. (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With natural sand.
Providing & casting in situ cement concrete M 25 of 0.00 0.00
trap/
granite/ quartzite/ gneiss metal for R.C.C. chajja as per detail
ed
design & drawings including centering, formwork, cover bloc
ks compacting , curing , finishing & roughening the surface if
special finish is to be provided & curing complete. (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With Crushed sand.

Providing & casting in situ cement concrete M 20 of 0.00 0.00

trap/
granite/ quartzite/ gneiss metal for R.C.C. chajja as per detail
ed
design & drawings including centering, formwork, cover bloc
ks compacting  ,  curing  ,  finishing  &  rougheningthe
surface  if
special finish is to be provided & curing complete. (Excluding
reinforcement and structural steel).with fully automatic micr
o
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer).... With Crushed sand.
Providing  &  casting  in  situ  cement  concrete  M 25  of   0.00 0.00
trap/
granite/ quartzite/ gneiss metal for R.C.C. chajja as per detail
ed design & drawings including centering, formwork, ?
cover blocks
compacting & roughening the surface if special finish is to be
provided  &  curing  complete.  (Excluding  reinforcement
and
structural steel).with fully automatic micro processor based
PLC
with SCADA enabled concrete batch mix plant (pan mixer)....
With natural sand.

Providing & casting in situ cement concrete M 25 of 0.00 0.00

Providing and casting in situ cement concrete M 20 of trap / 0.00 0.00

granite  /  quartzite  /  gneiss  metalfor  R.C.C.  canopy  as
per
detailed designs and drawings including centering, formwor
k,
compacting and roughening the surface if special finish is to
be provided  and  curing  etc.  complete  (excluding
reinforcement).With crushed sand
Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00
granite  /  quartzite  /  gneiss  metal  for  R.C.C.  canopy  as
per
detailed designs and drawings including centering, formwor
k,
compacting and roughening the surface if special finish is to
be provided  and  curing  etc.  complete  (excluding
reinforcement).With natural sand

Providing and casting in situ cement concrete M 25 of trap / 0.00 0.00

Providing and casting in situ cement concrete in M 0.00 0.00

Providing and casting in situ cement concrete in M 20 of 0.00 0.00

trap/granite/quartzite/gneiss metal for R.C.C. pardi of requir
ed thickness  including  centering,  formwork,  cover  blocks
compacting , curing , finishing & roughening them if special
finish  is  to  be  provided  and  curing  complete.  (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With Crushed Sand.
Providing and casting in situ cement concrete in M 0.00 0.00
25 of trap/ granite/  quartzite/  gneiss  metal  for  R.C.C.
pardi  of  required thickness  including  centering,
formwork,  cover blockscompacting  ,  curing  ,  finishing  &
roughening  them  if
special finish is to be provided and curing complete. (Excludi
ng
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer.With natural sand.

Providing and casting in situ cement concrete in M 25 of 0.00 0.00

Providing and casting in situ cement concrete in M 0.00 0.00

20 of trap/ granite/  quartzite/  gneiss  metal  for  R.C.C.
pardi  of  required thickness  including  centering,
formwork,  cover  blocks
compacting , curing , finishing & rougheningthem if special
finish  is  to  be  provided  and  curing  complete.(Excluding
reinforcement and structural steel).with fully automatic micr
o
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer).... With natural sand.
Providing  and  casting  in  situ  cement  concrete  in  M 20  of 0.00 0.00
trap/granite/quartzite/gneiss metal for R.C.C. pardi of requir
ed thickness  including  centering,  formwork,  cover  blocks
compacting  and  roughening  them  if  special  finish  is  to
be
provided and curing complete. (Excluding reinforcement and
structural steel).with fully automatic micro processor based
PLC
with SCADA enabled concrete batch mix plant (pan mixer)....
With Crushed Sand.

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap/ granite/  quartzite/  gneiss  metal  for  R.C.C.
pardi  of  required thickness  including  centering,
formwork,  cover  blocks compacting  and  roughening
them  if  special  finish  is  to  be provided  and  curing
complete.(Excluding  reinforcement  and
structural steel).with fully automatic micro processor based
PLC
with SCADA enabled concrete batch mix plant (pan mixer)....
With natural sand.

Providing and casting in situ cement concrete in M 25 of 0.00 0.00

trap/granite/quartzite/gneiss metal for R.C.C. pardi of requir
ed thickness  including  centering,  formwork,  cover  blocks
compacting  and  roughening  them  if  special  finish  is  to
be
provided and curing complete. (Excluding reinforcement and
structural steel). with fully automatic micro processor based
PLC
with SCADA enabled concrete batch mix plant (pan mixer)....
With Crushed Sand.
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap/
granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or
parapet and sill of doors and windows moulded as per detail
ed
drawings or chamfered as approved by the Engineer includin
g centering,  formwork,  cover  blocks  compacting  ,  curing  ,
finishing & roughening them if special finish is to be provide
d
and curing complete. (Excluding reinforcement and structura
l steel).With  fully  automatic  micro  processor  based  PLC
with SCADA  enabled  reversible  drum  type  concrete
mixer  With natural sand.

Providing and casting in situ cement concrete in M 0.00 0.00

20 of trap/
granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or
parapet and sill of doors and windows moulded as per detail
ed
drawings or chamfered as approved by the Engineer includin
g centering,  formwork,  cover  blocks  compacting  ,  curing  ,
finishing & roughening them if special finish is to be provide
d
and curing complete. (Excluding reinforcement and structura
l steel).With  fully  automatic  micro  processor  based  PLC
with SCADA  enabled  reversible  drum  type  concrete
mixer  With Crushed Sand.
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap/
granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or
parapet and sill of doors and windows moulded as per detail
ed
drawings or chamfered as approved by the Engineer includin
g centering,  formwork,  cover  blocks  compacting  ,  curing  ,
finishing & roughening them if special finish is to be provide
d
and curing complete. (Excluding reinforcement and structura
l steel).with  fully  automatic  micro  processor  based  PLC
with
SCADA enabled concrete batch mix plant (pan mixer).... With
natural sand.

Providing and casting in situ cement concrete in M 0.00 0.00

20 of trap/
granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or
parapet and sill of doors and windows moulded as per detail
ed
drawings or chamfered as approved by the Engineer includin
g centering, formwork, cover blocks compacting , curing ,
finishing & roughening them if special finish is to be provide
d
and curing complete. (Excluding reinforcement and structura
l steel).with fully automatic micro processor based PLC
with
SCADA enabled concrete batch mix plant (pan mixer).... With
Crushed Sand.
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap /
quartzite /granite /gneiss metal for R.C.C. Waist slab, and ste
ps
of staircases as per detailed design and drawings or as direct
ed
including steel centering, plywood/ steel formwork, steel pr
ops,
compaction, finishing uneven and honeycombed surface wit
h
C.M. 1:3 of sufficient minimum thickness to give a smooth a
nd
even surface or roughening the surface if special finish is to
be
provided and curing etc. complete. (Excluding einforcement,
including cover block).
(Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) (Wooden centering will no
t be allowed)

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap /
quartzite /granite /gneiss metal for R.C.C. Waist slab, and ste
ps
of staircases as per detailed design and drawings or as direct
ed
including steel centering, plywood/ steel formwork, steel pr
ops,
compaction, finishing uneven and honeycombed surface wit
h
C.M. 1:3 of sufficient minimum thickness to give a smooth a
nd
even surface or roughening the surface if special finish is to
be
provided and curing etc. complete. (Excluding einforcement,
including cover block).
(Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) (Wooden centering will no
t be allowed)
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap / quartzite  /granite  /gneiss  metal  for
R.C.C.newel  posts  of
staircase as per detailed design and drawings including steel
centering, plywood / steel formwork, steel props, compactio
n, finishing  uneven  and  honeycombed  surface  with
C.M.1:3  of
sufficient minimum thickness to give a smooth and even surf
ace
or roughening the surface if special finish is to be provided a
nd
curing etc. complete. (Excluding reinforcement, including cov
er
block). (Newly laid concrete shall be covered by gunny bag,
plastic, tarpaulin etc.) (Wooden centering will not be allowe
d)

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap / quartzite  /granite  /gneiss  metal  for
R.C.C.newel  posts  of
staircase as per detailed design and drawings including steel
centering, plywood / steel formwork, steel props, compactio
n, finishing  uneven  and  honeycombed  surface  with
C.M.1:3  of
sufficient minimum thickness to give a smooth and even surf
ace
or roughening the surface if special finish is to be provided a
nd
curing etc. complete. (Excluding reinforcement, including cov
er
block). (Newly laid concrete shall be covered by gunny bag,
plastic, tarpaulin etc.) (Wooden centering will not be allowe
d)
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap
/granite / gneiss/ quartzite metal for R.C.C. arches with skew
backs  as  per  detailed  design  and  drawings  or  as
directed
including steel centering, plywood/steel formwork, steel pro
ps,
compaction, finishing uneven and honeycombed surface wit
h
C.M. 1:3 of sufficient minimum thickness to give a smooth a
nd
even surface or roughening the surface if special finish is to
be
provided and curing etc. complete. (Excluding reinforcement
,
including cover block). Newly laid concrete shall be covered
by
gunny bag, plastic, tarpaulin etc. (Wooden centering will not
be allowed)

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap
/granite / gneiss/ quartzite metal for R.C.C. arches with skew
backs  as  per  detailed  design  and  drawings  or  as
directed
including steel centering, plywood/steel formwork, steel pro
ps,
compaction, finishing uneven and honeycombed surface wit
h
C.M. 1:3 of sufficient minimum thickness to give a smooth a
nd
even surface or roughening the surface if special finish is to
be
provided and curing etc. complete. (Excluding reinforcement
,
including cover block). Newly laid concrete shall be covered
by
gunny bag, plastic, tarpaulin etc. (Wooden centering will not
be allowed)
Providing and casting in situ cement concrete in M 0.00 0.00
20 of trap / granite  /gneiss  /  quartzite  metal  for  R.C.C.
fins  of  required
thickness in position as shown on the drawings or as directe
d by Engineer in
charge including steel centering, plywood / steel formwork,
steel  props,  compaction,  finishing  uneven  and
honeycombed  surface  with  C.M.  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening t
he surface  if  special  finish  is  to  be  provided  and  curing
etc. complete.  (Excluding  reinforcement,  including  cover
block)
Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc. (Wooden centering will not be allowed)

Providing and casting in situ cement concrete in M 0.00 0.00

25 of trap / granite  /gneiss  /  quartzite  metal  for  R.C.C.
fins  of  required
thickness in position as shown on the drawings or as directe
d by Engineer in
charge including steel centering, plywood / steel formwork,
steel  props,  compaction,  finishing  uneven  and
honeycombed  surface  with  C.M.  1:3  of  sufficient
minimum
thickness to give a smooth and even surface or roughening t
he surface  if  special  finish  is  to  be  provided  and  curing
etc. complete.  (Excluding  reinforcement,  including  cover
block)
Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc. (Wooden centering will not be allowed)
Providing  and  fixing  in  position  TMT     FE     500  bar 0.00 0.00
reinforcement  of  various  diameters  for  R.C.C.  pile  caps,
footings,  foundations,  slabs,  beams  columns,  canopies,
staircase, newels, chajjas, lintels pardis, copings, fins, arches
etc. as per detailed designs, drawings and schedules. includi
ng
cutting, bending, hooking the bars, binding with wires or tac
k
welding and supporting as required complete. a) For TMT Fe
415 steel bars ( If Mild Steel/HYSD steel is to be used prior
permission from S.E. should be taken )

Providing and fixing in position Mild steel reinforcement 0.00 0.00

of
various diameters for R.C.C. pile caps, footings, foundations,
slabs, beams and columns, canopies, staircases, newels, chaj
jas,
lintels, pardies, coping, fins, arches etc. as per detailed desig
n and drawings and schedules including cutting, bending,
hooking the bars, binding with wires or tack welding
and supporting as required completed.

Providing and fixing in position TMT / HYSD steel bars 0.00 0.00

reinforcement  of  various  diameters  for  R.C.C.  pile  caps,
footings,  foundations,  slabs,  beams  and  columns,
canopies,
staircases, newels, chajjas, lintels, pardies, coping, fins, arch
es etc.  as  per  detailed  design  and  drawings  and
schedules including  cutting,  bending,  hooking  the  bars,
binding  with
wires or tack welding and supporting as required completed.
Providing and applying Anti corrosive treatment to Mild stee 0.00 0.00
l,
Tor steel bar reinforcement as per cement polymer composit
e coating (C.P.C.C.) method developed by C.E.C.R.I. including
cleaning the bar by means of any established mechanical or
manual  method  for  removing  rust  and  deleterious
material,
applying rapid setting primer and cement polymer sealing co
at of  approved  and  licensed  by  CECRI  including  redoing
the process  if  damage  occurs  during  handling,  stacking
etc.
complete. (With prior approval of SEMC) Item shall be used f
or old structures.

Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00

bars of 8mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 10mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 12mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 16mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 20mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 25mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 25mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge
Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0.00 0.00
bars of 28mm diameter as per IS: 13620
1993 specifications for
a thickness of 175micron Permissible variation of 50 micron
including  testing  of  coating  at  plant  extra  cost  for
careful
handling using PVC coating, binding wires instead of G. I. wir
es
to and from Plant) touching up the material supplied repair
work etc complete as per detailed specifications. (Lead 200k
m from  plant)  etc  complete.  (Item  shall  be  used  for  new
structures.)  Note  :  The  item  should  be  executed  with
prior
approval of Superintending Engineer. FREQUENCY OF TEST O
F FUSION BONDED EPOXY COAT a) Coating thickness shall be
tested at a frequency of not less than one full length bar eve
ry twenty  bars  for  each  size  b)  continuity  of  coating
shall  be
determined by testing one full length bar in every twenty ba
rs
for each size c) Coating thickness over the whole of the coat
ed
bar section shall be determined by sectioning and examining
one bar in every twenty tonnes for each size. d) For testing
adhesion of coating, samples shall be selected from each siz
e
according to the frequency given below: Nominal Size of Bar,
MM No. of Samples For all types of bar Minimum 1 for every
diameter or as directed by engineer in charge

26.45 NA 0.00 0.00

Providing and fixing in position after hoisting, precast 0.00 0.00
1:2
cement mortar reinforced jali 50 mm thick with 3 mm diame
ter
mild steel bar reinforcement, of approved design on both sid
e, fixing in cement mortar 1:3 and curing complete.

Providing and fixing in position after hoisting, precast 0.00 0.00

1:2
cement mortar reinforced jali 80 mm thick with 3 mm diame
ter
mild steel bar reinforcement, of approved design on both sid
es, fixing in cement mortar 1:3 and curing complete.
Providing and casting in situ c.c. M 20 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
With fully automatic micro processor based PLC with SCADA
enabled reversible drum type concrete mixer With natural sa
nd.

Providing and casting in situ c.c. M 20 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and curing  complete(Excluding  reinforcement
and  structural steel).With  fully  automatic  micro
processor  based  PLC  with SCADA  enabled  reversible
drum  type  concrete  mixer  With Crushed sand.
Providing and casting in situ c.c. M 25 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
With fully automatic micro processor based PLC with SCADA
enabled reversible drum type concrete mixer With natural sa
nd.

Providing and casting in situ c.c. M 25 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
With fully automatic micro processor based PLC with SCADA
enabled reversible drum type concrete mixer With Crushed s
and.
Providing and casting in situ c.c. M 30 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and curing  complete  (Excluding  reinforcement
and  structural steel).With  fully  automatic  micro
processor  based  PLC  with SCADA  enabled  reversible
drum  type  concrete  mixer  With natural sand.

Providing and casting in situ c.c. M 30 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks  compacting,
finishing  the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). With fully automatic mic
ro
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With Crushed sand.

Providing and casting in situ c.c. M 35 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering, formwork, ?
cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer With natural sand.
Providing and casting in situ c.c. M 35 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and curing  complete  (Excluding  reinforcement
and  structural steel).With  fully  automatic  micro
processor  based  PLC  with SCADA  enabled  reversible
drum  type  concrete  mixer  With Crushed sand

Providing and casting in situ c.c. M 40 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks  compacting,
finishing  the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel).With fully automatic micr
o
processor based PLC with SCADA enabled reversible drum ty
pe concrete mixer ?With natural sand.

Providing and casting in situ c.c. M 40 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and curing  complete  (Excluding  reinforcement
and  structural steel).With  fully  automatic  micro
processor  based  PLC  with SCADA  enabled  reversible
drum  type  concrete  mixer  With Crushed sand.
Providing and casting in situ c.c. M 20 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer).... With natura
l sand.

Providing and casting in situ c.c. M 20 of trap metal for RCC 0.00 0.00

Providing and casting in situ c.c. M 25 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering, formwork, ?
cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). with fully automatic mic
ro
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer)... With natural sand.
Providing and casting in situ c.c. M 25 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering, formwork, ?
cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). with fully automatic mic
ro
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer)?With Crushed sand.

Providing and casting in situ c.c. M 30 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blockscompacting  ,
curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)... With Natural
sand.
Providing and casting in situ c.c. M 30 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering, formwork, ?
cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). with fully automatic mic
ro
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer)... With Crushed sand.

Providing and casting in situ c.c. M 35 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks  compacting,
finishing  the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). with fully automatic mic
ro
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer)... With natural sand.

Providing and casting in situ c.c. M 35 of trap metal for RCC 0.00 0.00

rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering,  formwork,  cover  blocks
compacting  ,  curing  ,
finishing & roughening them to form surface with C.M. 1:3 o
f
sufficient minimum thickness to give smooth and even surfa
ce or  roughening  them  if  special  finish  is  to  be
provided  and
curing complete (Excluding reinforcement and structural ste
el).
with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer)... With Crushe
d sand.
Providing and casting in situ c.c. M 40 of trap metal for RCC 0.00 0.00
rectangular  grid  beam  with  slab  as  per  detailed  design
and drawing  or  as  directed  including  dewatering  if
necessary, centering, formwork, ?
cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness t
o
give smooth and even surface or roughening them if special
finish  is  to  be  provided  and  curing  complete  (Excluding
reinforcement and structural steel). with fully automatic mic
ro
processor based PLC with SCADA enabled concrete batch mi
x plant (pan mixer)... With natural sand.

Providing and casting in situ c.c. M 40 of trap metal for RCC 0.00 0.00

Providing and fixing during laying in RCC Slab rectangular 2 0.00 0.00

mm thick M.S. sheet fan hook box of size 180x100 mm with
required depth with holes or notches as required, bottom an
d
top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round
headed screws together with 12 mm dia. M.S. bar bent to sh
ape
with hooked ends for fan hook and painting to exposed surf
ace
Providing and laying Ready Mix cement concrete M   25 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C.wor
k in
foundations like raft, strip, foundations, grillage and footings
of
R.C.C. columns and steel stanchions etc. including bailing out
water, formwork, cover blocks, compacting , curing , finishin
g
& roughening the surface if special finish is to be provided (
Excluding  reinforcement  &  structural  steel  )  complete
With Natural  Sand    (  Item  to  be  used  with  prior
permission  of Superintending Engineer )

Providing and casting Ready Mix Cement Concrete M 0.00 0.00

15 of trap /  granite  /  quartzite  /gneiss  metal,  for  R.C.C.
work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete.With pressure pump.

Providing and casting Ready Mix Cement Concrete M 0.00 0.00

20 of trap /  granite  /  quartzite  /gneiss  metal,  for  R.C.C.
work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete.With pressure pump.
Providing and casting Ready Mix Cement Concrete M 0.00 0.00
20 of trap /  granite  /  quartzite  /gneiss  metal,  for  R.C.C.
work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete. Without pressure pump.

Providing and casting Ready Mix Cement Concrete M 0.00 0.00

25 of trap /  granite  /  quartzite  /gneiss  metal,  for  R.C.C.
work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete. With pressure pump.

Providing and casting Ready Mix Cement Concrete M 0.00 0.00

Providing and casting Ready Mix Cement Concrete M30 of tr 0.00 0.00

ap / granite  /  quartzite  /gneiss  metal,  for  R.C.C.  work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete. With pressure pump.
Providing and casting Ready Mix Cement Concrete M 0.00 0.00
30 of trap /  granite  /  quartzite  /gneiss  metal,  for  R.C.C.
work  for
Building,Bridges or other works as per drawing or as directe
d, including,  centering,  formwork,  compacting,  covering
newly
laid concrete by gunny bags, plastic or tarpaulin, finishing th
e
surface or roughening if special finish is to be provided, curi
ng etc. complete. Without pressure pump.

Providing and laying Ready Mix cement concrete M 25 Read 0.00 0.00

y
mix of trap /granite /quartzite /gneiss metal, Crushed Sand f
or
R.C.C.work in foundations like raft, strip, foundations, grillag
e and  footings  of  R.C.C.  columns  and  steel  stanchions
etc. including  bailing  out  water,  formwork,  cover  blocks,
compaction,  curing,  finishing  and  roughening  the  surface
if special finish is to be provided ( Excluding reinforcement &
structural steel ) complete.With Crushed Sand   ( Item to be
used with prior permission of Superintending Engineer )

Providing and laying Ready Mix cement concrete M 30 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C.wor
k in
foundations like raft, strip, foundations, grillage and footings
of
R.C.C. columns and steel stanchions etc. including bailing out
water,  formwork,  cover  blocks,  compaction,curing,
finishing
and roughening the surface if special finish is to be provided
( Excluding  reinforcement  &  structural  steel  )  complete.
With Natural  Sand    (  Item  to  be  used  with  prior
permission  of Superintending Engineer )
Providing and laying Ready Mix cement concrete M   30 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C.wo
rk
in foundations like raft, strip, foundations, grillage and footi
ngs
of R.C.C. columns and steel stanchions etc. including bailing
out  water,  formwork,  cover  blocks,  compaction,  curing,
finishing and roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural steel ) compl
ete With Crushed Sand
( Item to be used with prior permission of
Superintending Engineer )

Providing and laying in situ cement concrete M 35 Ready mi 0.00 0.00

x of  trap  /granite  /quartzite  /gneiss  metal,  Natural  Sand
for
R.C.C.work in foundations like raft, strip, foundations, grillag
e and  footings  of  R.C.C.  columns  and  steel  stanchions
etc. including  bailing  out  water,  formwork,  cover  blocks,
compaction,  curing,  finishing  and  roughening  the  surface
if special finish is to be provided ( Excluding reinforcement &
structural steel ) complete ?With Natural Sand   ( Item to be
used with prior permission of Superintending Engineer )

Providing and laying Ready Mix cement concrete M 35 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C.wo
rk
in foundations like raft, strip, foundations, grillage and footi
ngs
of R.C.C. columns and steel stanchions etc. including bailing
out  water,  formwork,  cover  blocks,  compaction,curing,
finishing and roughening the surface if special finish is to be
provided ( Excluding reinforcement & structural steel ) compl
ete ?With Crushed Sand
( Item to be used with prior permission
of Superintending Engineer )
Providing and laying Ready Mix cement concrete M   40 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C.wor
k in
foundations like raft, strip, foundations, grillage and footings
of
R.C.C. columns and steel stanchions etc. including bailing out
water,  formwork,  cover  blocks,  compaction,curing,
finishing
and roughening the surface if special finish is to be provided
( Excluding  reinforcement  &  structural  steel  )  complete
With Natural  Sand    (  Item  to  be  used  with  prior
permission  of Superintending Engineer )

Providing and laying Ready Mix cement concrete M 40 of tra 0.00 0.00

Providing and laying Ready Mix cement concrete M 25 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Natural  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready Mix cement concrete M   25 of tra 0.00 0.00
p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover
blocks,compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 30 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   35 of tra 0.00 0.00
p /granite  /quartzite  /gneiss  metal,  Natural  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concreteM 35 of tra 0.00 0.00

Providing and laying Ready mix cement concrete M 40 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Natural  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   40 of tra 0.00 0.00
p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C.columns as per detailed designs & drawing or as direct
ed including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 25 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C.be
ams
and lintels as per detailed designs & drawing or as directed
including  centering,  formwork,  cover  blocks,  compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   30 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C. bea
ms
and lintels as per detailed designs & drawing or as directed
including  centering,  formwork,  cover  blocks,  compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concreteM 30 of tra 0.00 0.00

Providing and laying Ready mix cement concrete M 35 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C. bea
ms
and lintels as per detailed designs & drawing or as directed
including  centering,  formwork,  cover  blocks,  compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   35 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C.be
ams
and lintels as per detailed designs & drawing or as directed
including  centering,  formwork,  cover  blocks,  compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 40 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C.be
ams
and lintels as per detailed designs & drawing or as directed
including  centering,  formwork,  cover  blocks,  compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Crushed Sand  ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   25 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C. Sla
bs
and Landings as per detailed designs & drawing or as directe
d including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 25 of tra 0.00 0.00

Providing and laying Ready mix cement concrete M 30 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C. Sla
bs
and Landings as per detailed designs & drawing or as directe
d including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete.With  Natural  Sand    (  Item  to  be  used  with
prior permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   30 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Sla
bs
and Landings as per detailed designs & drawing or as directe
d including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete. With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 35 of tra 0.00 0.00

p
/granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Sla
bs
and Landings as per detailed designs & drawing or as directe
d including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Crushed Sand   ( Item to be used with prior
permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   40 of tra 0.00 0.00
p
/granite /quartzite /gneiss metal, Natural Sand for R.C.C. Sla
bs
and Landings as per detailed designs & drawing or as directe
d including  centering,  formwork,  cover  blocks,
compaction,
curing, finishing and roughening the surface if special finish i
s
to be provided ( Excluding reinforcement & structural steel )
complete With Natural Sand   ( Item to be used with prior
permission of Superintending Engineer )

Providing and laying Ready mix cement concrete M 40 of tra 0.00 0.00

Providing and laying Ready mix cement concrete M 25 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Natural  Sand  for
R.C.C. Rectangular  grid  beam  with  slab  as  per  detailed
designs  & drawing  or  as  directed  including  centering,
formwork,  cover blocks,  compaction,  curing,  finishing
and  roughening  the surface  if  special  finish  is  to  be
provided  (  Excluding
reinforcement & structural steel ) complete. With Natural Sa
nd   ( Item to be used with prior permission of Superintending
Engineer )
Providing and laying Ready mix cement concrete M   25 of tra 0.00 0.00
p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C. Rectangular  grid  beam  with  slab  as  per  detailed
designs  & drawing  or  as  directed  including  centering,
formwork,  cover blocks,  compaction,  curing,  finishing
and  roughening  the surface  if  special  finish  is  to  be
provided  (  Excluding
reinforcement & structural steel ) complete. With Crushed S
and
( Item to be used with prior permission of Superintending
Engineer )

Providing and laying Ready mix cement concrete M 30 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C. Rectangular  grid  beam  with  slab  as  per  detailed
designs  & drawing  or  as  directed  including  centering,
formwork,  cover blocks,  compaction,  curing  and
roughening  the  surface  if
special finish is to be provided ( Excluding reinforcement &
structural steel ) complete. With Crushed Sand  ( Item to be
used with prior permission of Superintending Engineer )
Providing and laying Ready mix cement concrete M   35 of tra 0.00 0.00
p /granite  /quartzite  /gneiss  metal,  Natural  Sand  for
R.C.C. Rectangular  grid  beam  with  slab  as  per  detailed
designs  & drawing  or  as  directed  including  centering,
formwork,  cover blocks,  compaction,  curing,  finishingand
roughening  the surface  if  special  finish  is  to  be  provided
(  Excluding
reinforcement & structural steel ) complete. With Natural Sa
nd   ( Item to be used with prior permission of Superintending
Engineer )

Providing and laying Ready mix cement concrete M 35 of tra 0.00 0.00

Providing and laying Ready mix cement concrete M 40 of tra 0.00 0.00

p /granite  /quartzite  /gneiss  metal,  Crushed  Sand  for
R.C.C. Rectangular  grid  beam  with  slab  as  per  detailed
designs  & drawing  or  as  directed  including  centering,
formwork,  cover blocks,  compaction,  curing,  finishing
and  roughening  the surface  if  special  finish  is  to  be
provided  (  Excluding
reinforcement & structural steel ) complete With Crushed Sa
nd   ( Item to be used with prior permission of Superintending
Engineer )
Providing second class Burnt Brick masonry with convention 0.00 0.00
al/
I.S. type bricks in cement mortar 1:6 in foundations and plint
h of inner walls/ in plinth external walls including bailing out
water manually , striking joints on unexposed faces, raking o
ut joints on exposed faces and watering etc. Complete.

Providing first class Burnt Brick masonry with conventional/ 0.00 0.00

I.S.
type bricks in cement mortar 1:6 in plinth including bailing o
ut
water manually, striking joints on unexposed faces, pointing
with cement mortar 1:3 on exposed face and watering
etc. Complete.

Providing second class Burnt Brick masonry with convention 0.00 0.00

al/
I.S. type bricks in cement mortar 1:6 in plinth as backing in
composite masonry including bailing out water manually,
striking joints, raking out joints and watering etc Complete.

Providing First class Burnt Brick masonry with conventional/ 0.00 0.00

I.S.
type bricks in cement mortar 1:6 in superstructure including
striking joints, raking out joints, watering and scaffolding etc.
Complete

Providing second class Burnt Brick masonry with convention 0.00 0.00

al/
I.S. type bricks in cement mortar 1:6 in superstructure includ
ing
striking joints, raking out joints, watering and scaffolding etc.
Complete
Providing second class Burnt Brick masonry with convention 0.00 0.00
al/
I.S. type bricks in cement mortar 1:4 in half brick thick wall
including mild steel longitudinal reinforcement of 2 bars of 6
mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at
every third course, properly bent and bonded at ends
scaffolding, racking out joints and watering etc. complete.

Providing Burnt Brick on 0.00 0.00

edge masonry with second class bricks
of conventional type bricks in cement mortar 1:3 including
mild
steel longitudinal reinforcement of 2 bars of 6mm diameter
/
one strips of hoop iron 25 mm X 1.6 mm placed at every thir
d
course, properly bent and bonded at ends, scaffolding, rakin
g out joints and watering etc .complete.

Providing first class Burnt Brick masonry with conventional / 0.00 0.00

I.S. type bricks in cement mortar 1:4 including
scaffolding,
racking out joints pointing in C.M. 1:3 and watering in pillars
of
rectangular or square shape as shown on the drawing or as
directed etc.complete.

Providing first class Brick masonry with conventional / IS. ty 0.00 0.00

pe
bricks in cement mortar 1:4 including scaffolding, racking ou
t
joints pointing in C.M 1:3 and watering etc. in pillars of curve
d
shapes, as shown on the drawing or as directed etc. complet
e.

Providing second class Burnt Brick masonry with convention 0.00 0.00

al / I.S.  type  bricks  in  cement  mortar  1:4  including
scaffolding, racking  out  joints  and  watering  etc.  in  pillar
of  rectangular
shapes as shown in the drawings or as directed complete.
Providing second class Burnt Brick masonry with convention 0.00 0.00
al / I.S.  type  bricks  in  cement  mortar  1:4  including
scaffolding,
racking out joints and watering etc.in pillar of curved shapes
as shown in the drawing or as directed complete.

Providing fly ash brick masonry with conventional / I.S. type 0.00 0.00

fly
ash bricks in C.M. 1:6 in foundation and plinth including baili
ng
out water manually striking joints, racking out joints waterin
g and scaffolding etc. complete.

Providing fly ash brick masonry with conventional/ I.S. type 0.00 0.00

bricks in cement mortar 1:6 in superstructure including striki
ng
joints, raking out joints, watering and scaffolding etc. Compl
ete

Providing Second class fly ash brick masonry with conventio 0.00 0.00

nal / I.S. type bricks in cement mortar 1:4 in half brick thick
wall
including mild steel longitudinal reinforcement of two bars o
f 6
mm diameter / two hoop iron strips 25 mm x 1.60 mm at ev
ery
third course, properly bent and bounded at ends scaffolding
raking out joints and watering etc. complete.

Providing Autoclaved Aerated Concrete Block masonary 0.00 0.00

of
Ecolite or equivalent make conforming to IS:2185 (Part 3) 19
84 in extra fine jointing mortar of fixoblock of UltraTech or
equivalent in superstructure including striking joints, raking
out
joints and scaffolding etc. Complete. (The test shall be carrie
d out conforming to IS:6441 (Part I)   1972)
Providing  Autoclaved  Aerated  Concrete  Block  masonary   0.00 0.00
of
Ecolite or equivalent make conforming to IS:2185 (Part 3) 19
84 in extra fine jointing mortar of fixoblock of UltraTech or
equivalent  in  Half  brick  thick  wall  including  striking
joints,
raking out joints and scaffolding etc. Complete. (The test sha
ll be carried out conforming to IS:6441 (Part I)   1972)

Providing uncoursed rubble masonry of trap / granite / quar 0.00 0.00

tzite / gneiss stones in cement mortar 1:6 in foundation and
plinth
of inner walls / in plinth of external walls including bailing o
ut water manually , striking joints on un exposed faces
and watering etc.complete.

Providing uncoursed rubble masonry of trap / granite / quar 0.00 0.00

tzite / gneiss stones in cement mortar 1:5 in basements inclu
ding
scaffolding, bailing out water manually, racking out joints wh
en
plastering is to be done striking joints where no pointing or
plastering is to be done and watering etc.complete.

Providing uncoursed rubble masonry of trap / granite / quar 0.00 0.00

tzite / gneiss stone in cement mortar 1:3 in basement with p
atent
water proofing compound added to it at rate of 1 kg per bag
of cement including bailing out water manually,
scaffolding
racking out joints when plastering is to be done and waterin
g etc. complete.

Providing uncoursed rubble masonry of trap / granite / quar 0.00 0.00

tzite / gneiss stones in cement mortar 1:6 in superstructure i
ncluding
racking out joints when plastering is to be done / striking joi
nts when  no  plastering  is  to  be  done  on  inside
watering  and scaffolding etc.complete.
Providing random rubble masonry second sort of trap / grani 0.00 0.00
te /  quartzite  /  gneiss  stones  in  cement  mortar  1:6  in
plinth including  bailing  out  water  manually  ,  striking
joints  on
unexposed faces. (Excluding pointing) etc.complete.

Providing random rubble masonry second sort of trap / grani 0.00 0.00

te / quartzite / gneiss stones in cement mortar 1:6 in
superstructure racking out joints when plastering is to be do
ne /
striking joints when no pointing or plastering is to be done o
n the inside watering and scaffolding etc.complete.

Providing random rubble masonry first sort of trap / granite 0.00 0.00

/
quartzite / gneiss stones in cement mortar 1:6 in external wa
lls
of plinth including bailing out water manually , racking out
joints when pointing is to be done and striking joints from
inside including watering etc.complete.

Providing random rubble masonry first sort of trap /granite / 0.00 0.00

quartzite / gneiss stones in cement mortar 1:6 in superstruct
ure including bailing out water manually ,raking out joints
from
outside and striking joints when no pointing or plastering is t
o
be done from inside watering and scaffolding etc.complete.

Providing coursed rubble masonry second sort of trap / gran 0.00 0.00

ite / quartzite / gneiss stones in cement mortar 1:6 in extern
al walls
of plinth including bailing out water manually , striking joint
s inside and raking out joints from outside and watering
etc.complete

Providing coursed rubble masonry second sort of trap / gran 0.00 0.00

ite / quartzite / gneiss stones in cement mortar 1:6 in
superstructure including raking out joints when plastering is
to
be done and striking joints when no plastering is to be done
on the inside, watering scaffolding etc.complete.
Providing coursed rubble masonry first sort of trap / granite 0.00 0.00
/
quartzite / gneiss stones in cement mortar 1:6 in external w
ork
of plinth including bailing out water manually, striking joints
inside and watering etc.complete.

Providing coursed rubble masonry first sort of trap / granite 0.00 0.00

/
quartzite / gneiss stones in cement mortar 1:6 in superstruct
ure
including racking out joints on the inside when plastering is t
o be done, watering and scaffolding etc. complete.

Providing coursed rubble masonry first sort for pillars of trap 0.00 0.00

/ granite  /  quartzite  /  gneiss  stones  in  cement  mortar
1:6 including  pointing  with  cement  mortar  1:3
scaffolding  and watering etc.complete.

Providing coursed rubble masonry 2nd sort using all stones 0.00 0.00

of full height in each course of trap/
granite/quartzite/gneiss
stones in cement mortar 1:6 in external walls of plinth includ
ing
bailing out water manually, striking joints and raking out join
ts and watering.

Providing and laying masonry of I.S. Standard C.C. 0.00 0.00

hollow
block 100 x 200 x 400 mm with 100mm thick in cement mort
ar
1:6 proportion for superstructure including curing, scaffoldin
g etc. complete.

Providing and laying masonry of I.S. Standard C.C. 0.00 0.00

hollow
block 200 x 200 x 400 with 200mm thick mm in cement mort
ar
1:6 proportion for superstructure including curing, scaffoldin
g etc. complete.

Providing and constructing masonry in precast solid Concret 0.00 0.00

e Block (Grade D 50 As per I.S. 2185, Part I, 1974, Reframed
1987) having compressive strength 5 00 N/mm2) of size (300
mm  x  200  mm  x  150mm)  in  cement  mortar  1:6  for
superstructure  including  striking  joints  on  unexposed
faces, racking  out  joints  on  exposed  faces,  watering,
curing  and scaffolding etc. complete.
Providing  Autoclaved  areated  concrete  block  masonry  of 0.00 0.00
approved manufacturer confirming to IS 2185 Part III 1984 of
size 600 mm x 200mm having thickness 100,150,200 or 250
mm in cement mortar 1:6 in foundations and plinth of inner
walls / external walls including bailing out water, striking joi
nts
on unexposed faces, racking out joints on exposed faces and
watering complete.

Providing Autoclaved areated concrete block masonry of 0.00 0.00

approved manufacturer confirming to IS 2185 Part III 1984 of
size 600 mm x 200mm having thickness 100,150,200 or 250
mm in cement mortar 1:6 in super structure including strikin
g
joints, racking out joints watering and scaffolding complete.
( Note R.C.C. design shall be modified accordingly, where thi
s item is cosidered for masonary )

Providing Areated Autoclaved Cellular Blocks in Cement mor 0.00 0.00

tar
1:6 using Fly Ash (AAC Blocks 75 X 250 X 625 mm size) with
cement mortar 1:6 (Billtech or any other approved make) 75
mm  thick  wall  masonary  in  superstructure  or  add  on
floors including  fitting,  scaffolding  and  finishing  etc
complete  as directed by Engineer in charge

Providing Areated Autoclaved Cellular Blocks in Cement mor 0.00 0.00

tar
1:6 using Fly Ash (AAC Blocks 100 X 250 X 625 mm size) with
cement mortar 1:6 (Billtech or any other approved make) 10
0 mm  thick  wall  masonary  in  superstructure  or  add  on
floors including  fitting,  scaffolding  and  finishing  etc
complete  as directed by Engineer in charge
Providing Areated Autoclaved Cellular Blocks in Cement mor 0.00 0.00
tar
1:6 using Fly Ash (AAC Blocks 125 X 250 X 625 mm size) with
cement mortar 1:6 (Billtech or any other approved make) 12
5 mm  thick  wall  masonary  in  superstructure  or  add  on
floors including  fitting,  scaffolding  and  finishing  etc
complete  as directed by Engineer in charge

Providing Areated Autoclaved Cellular Blocks in Cement mor 0.00 0.00

tar
1:6 using Fly Ash (AAC Blocks 150 X 250 X 625 mm size) with
cement mortar 1:6 (Billtech or any other approved make) 15
0 mm  thick  wall  masonary  in  superstructure  or  add  on
floors including  fitting,  scaffolding  and  finishing  etc
complete  as directed by Engineer in charge

Providing Areated Autoclaved Cellular Blocks in Cement mor 0.00 0.00

tar
1:6 using Fly Ash (AAC Blocks 200 X 250 X 625 mm size) with
cement mortar 1:6 (Billtech or any other approved make) 20
0 mm  thick  wall  masonary  in  superstructure  or  add  on
floors including  fitting,  scaffolding  and  finishing  etc
complete  as directed by Engineer in charge

Providing Green Build Product (GBP) Build Fast Plus masonry 0.00 0.00

ecofriendly  wet  mix  /Blocks  laying  Adhesive  is  a
prepolymerized,  wet  mix  jointing  adhesive  which  is
suitable  for
Building masonry walls with all kind of blocks with thickness
of
thin layer of 2mm to 4mm between masonry units. There is
no need  to  pre wet  the  Blocks  nor  to  post  cure  the  wall
with water.Confirming to IS 2185 of size 75 x 240x 650 mm in
superstructure including striking joints, racking outjoints fac
es and scaffolding etc. complete.
Providing Green Build Product (GBP) Build Fast Plus masonry 0.00 0.00
ecofriendly wet mix /Blocks of size 100 X 240 x 650 mm layin
g Adhesive is a pre
polymerized, wet mix jointing adhesive which
is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between mason
ry units. There is no need to pre
wet the Blocks nor to post cure the  wall  with
water.Confirming  to  S  2185  of  size  in
superstructure including striking joints, racking out joints fac
es and scaffolding etc. complete.

Providing Green Build Product (GBP) Build Fast Plus masonry 0.00 0.00

ecofriendly wet mix /Blocks of size 200 X 240 x 650 mm layin
g Adhesive is a pre
polymerized, wet mix jointing adhesive which
is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between mason
ry units. There is no need to pre
wet the Blocks nor to post cure the wall with
water.Confirming to S 2185 of size in
superstructure including striking joints, racking out joints fac
es and scaffolding etc. complete.

Providing expansion joints in R.C.C. framed structure (interio 0.00 0.00

r
column) with plain premoulded filler 25 mm thick including
fixing T.W. battens on both faces and finishing as directed etc
. Complete.

Providing expansion joints in R.C.C. framed structure (exteri 0.00 0.00

or
Columns) with plain premoulded filler 25 mm thick and 3 m
m
thick alluminium plate, hold fast, fixing T.W. battens on inter
nal face, finishing etc. complete as directed.
Providing expansion joints in R.C.C. framed structure (at floo 0.00 0.00
r level) with premoulded filler 25 mm thick and 3 mm
thick
aluminium plate as required, bitumen poured filler and fixin
g T.W. battens on rear faces etc. complete as directed.

Providing expansion joints in R.C.C. framed structure (at terr 0.00 0.00

ace level)  with  premoulded  filler  25  mm  thick  and  3
mm  thick aluminium  plate  as  required,  bituminous
poured  filler,  fixing
lead, flashing on upper side and T.W. battens on inner face
finishing etc. Complete as directed.

Providing expansion joints in reinforced cement concrete 0.00 0.00

framed structure (interior columns) with plain premoulded fi
ller
with confirming to IS 1838,1961, 25 mm thick with 40 mm
wide and 1 mm thick stainless steel plate, hold fast, fixing T.
W.
battens on internal face finishing etc. complete as directed

Providing expansion joints in R.C.C. framed structure (exteri 0.00 0.00

or
column) with plain premoulded filler 25 mm thick with 40 m
m
wide and 1 mm thick stainless steel plate, hold fast, fixing T.
W. battens on internal face and finishing etc. complete.

Providing expansion joints in R.C.C. framed structure (at floo 0.00 0.00

r
level) with plain premoulded filler 25 mm thick with 40 mm
wide and 1 mm thick stainless steel plate, hold fast, fixing T.
W. battens on internal face and finishing etc. complete.

Providing expansion joints in R.C.C. framed structure (at Terr 0.00 0.00

ace
level) with premoulded filler 25 mm thick with 40 mm wide
and
1 mm thick stainless steel plate as required, bitumen poured
filler  and  fixing  T.W.  battens  on  inner  faces  finishing  etc.
complete as directed.
Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 3 0.00 0.00
0
mm x 30 mm in double layer in the expansion joints in R.C.C
framed  structure  (at  floor  level  /  at  terrace  level  /
interior
columns) for overlapping of closed cell foam joints, applying
TP  40 PRIMER on both the sides of concrete surface, filling t
he 25  mm  x  25  mm  gap  with  the  POLYDEE 41  highly
flexible sealant and covering the joint with Polydee
LM, 150 mm width in 2 coats etc. complete.

Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 3 0.00 0.00

0
mm x 30 mm in double layer in the expansion joints in R.C.C.
framed  structure  (Exterior  column)  with  closed  cell
foam  , applying TP
40 PRIMER on both the sides of concrete surface,
filling the 25 mm x 25 mm gap with the POLYSEAL, highly
flexible sealant and covering the joint with Polydee  LM, 150
mm width in 2 coats and fixing the aluminium plate of 100
mm wide  and  3  mm  thick  on  external  face  of  column
etc. complete.Note   for  item  no.  9  &  10  Prior  approval  of
Superintending Engineer is Necessary before execution of w
ork.

0.00 0.00
Providing and fixing bituminous pad 25mm thick for expansi
on joints in retaining wall, compound wall etc. complete.

Providing and laying damp proof course 50 mm thick in M20 0.00 0.00

cement concrete layer and bitumen / using cement with
waterproofing compound curing, formwork etc. complete.

Providing and applying Bitumen VG30/VG40 layer at 2 kg. pe 0.00 0.00

r
square meter over the terrace, structural slab including clean
ing the surface for waterproofing as directed complete
Providing leak proof treatment by Injection grouting method 0.00 0.00
to
old floor without removing tiles of W.C., bath, with cement
sand proportion of 1:1.5 and waterproofing compound at 2
kg/bag of cement mixed in 35 liters of water including drillin
g
holes in required position grouting with above mixed solutio
n and ceiling etc. complete.

Providing cement based water proofing treatment to terrace 0.00 0.00

s
(Indian water proofing or alike) with brick bats laid in requir
ed
slope to drain the water for any span after cleaning the base
surface.  Applying  a  coat  of  cement  slurry  admixed  with
approved water proofing compound and laying the brick bat
s on  bottom  layer  in  C.M.1:5  admixed  with  approved
water
proofing compound filling up to half depth of brick bats, curi
ng
this layer for 3 days, applying cement slurry over this layer
joints of brick bats with C.M.1:3 admixed with approved wat
er
proofing compound and finally top finishing with average 20
mm. thick layers of same mortar added with jute fiber at 1 K
g
per bag including finishing the surface smooth with cement
slurry  admixed  with  approved  water  proofing  compound.
Marking finished surface with false squares of 300mm x 300
mm. making the junctions at the parapet rounded and taper
ed
top for required height, with drip mould at the junction of
plaster and parapet and curing and covering 10 years Guaran
tee
against leakproofness on Court fee stamp paper of Rs. 500/i
ncluding ponding test etc. complete.
Providing water proof bedding for flooring of Bath and WC 2 0.00 0.00
5
mm thick in C.M. 1:3 including using approved water proofin
g compound  in  specified  proportion  as  per
manufacturers
specifications for per bag of cement including leveling, curin
g
and covering 10 years guarantee on court fee stamp paper of
Rs.500/  including ponding test etc. complete.

Providing waterproof plaster in W.C. and bath 12 mm thick f 0.00 0.00

or
dado in cement mortar 1:3 with neat finishing, floating using
waterproofing compound at the rate of 1 kg. per bag of cem
ent
of approved make and manufacturer and curing etc. complet
e. (Excluding Tiles) (As directed by Engineer in Charge)

Providing waterproof plaster in W.C. and bath 20 mm thick f 0.00 0.00

or
dado in cement mortar 1:3 with neat finishing, floating using
waterproofing compound at the rate of 1 kg. per bag of cem
ent of approved make and manufacturer and curing (and
filling
joints of Nahani trap and any outlet by properly) etc. comple
te.

Removing the tar or coba and disposing of the 0.00 0.00

material  as directed etc. complete.
Providing and applying water proofing treatment using acryli 0.00 0.00
c
polymer modified cement based water proofing coating with
fibre glass mesh mixing at the rate of powder to liquid (2:1)
by
weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit
or alike of chemicals for masonry and concrete surface by br
ush
covering 7 years guarantee on Stamp Papers etc. complete.
Providing  and  laying  jointless  Polydee LM,  a  highly   0.00 0.00
flexible
elastometric coating for RCC / cementitious surface for terra
ce waterproofing on B.B. Coba / R.C.C, after application of TP
42 Primer  on  perfectly  clean  surface  (free  from  loose
dust  and foreign matter) application of 1st coat of Polydee
LM @ 700 gms/sqm  and  applying  2nd  coat  of  Polydee LM
@  700 gms/sqm  and  finishing  the  same  with  sprinkling
the  AG 10 granules  on  the  wet  coating.  (After  finishing
covering  the treatment  with  25mm  cement  plaster  for
protection  with
fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in
separate item.) covering 7 years guarantee on Court Fee Sta
mp Paper of Rs. 100/  etc. complete.

Providing and applying a base coat comprising of 1 Kg Polyd 0.00 0.00

eeMC and 1 Kg fresh cement after wetting the surface follow
ed by drying the surface for 2 days, apply primer coat of TP
40 and after drying, applying Polydee
11 two component (mixing ratio
2 A : 1 B) ) Antibacterial food grade coating inside drinking
water tank in two coats with time interval of minimum 8 hrs.
covering 7 years guarantee on Court Fee Stamp Paper of Rs.
100/  etc. complete.
Providing and fixing 20 to 25 mm thick rough shahabad box 0.00 0.00
type waterproofing for basement or underground floor on a
base of Cement concrete 1:3:6, including sub base of 2.50
centimeter  thick  Cement  mortar  1:3  with  conceal,
secrete
(RMW), Algae proof or other alike waterproofing liquids, rak
ing
of joints upto 35 mm depth, filling the joints with 6 mm size
crushed metal, hand grouting with cement slurry, curing and
cleaning, with 7 years guarantee on court fee stamp of Rs.
100/   with  ponding  test  etc  complete.  (excluding  Cement
concrete 1:3:6 base concrete )

Providing and fixing 20 to 25 mm thick rough shahabad box 0.00 0.00

type  waterproofing  treatment  to  vertical  outside  faces  of
Reinforced Cement concrete walls of basement or undergrou
nd floor  including  filling  the  gap  of  25  mm  between
rough
shahabad and R.C.C. walls with cement grout mixed with wa
ter proofing  liquid  Algae  proof  or  other  alike  with  one
tile  lift method,  brushing  the  joints  horizontally  with
cement  slurry
mixed with water proofing liquid for width 30 to 35 mm and
sloping  coping  over  topmost  tile  with  cement  mortar
1:3,
butting the bottom most with Cement concrete 1:2:4 mixed
with water proofing liquid, curing, with 7 years guarantee on
court fee stamp of Rs.100/  with ponding test etc complete.
(excluding Cement concrete 1:3:6 base concrete )

Providing and laying perforated PVC 160 mm dia pipe in pro 0.00 0.00

per line,level& slope including necessary material fitting
etc. complete.
Providing and applying required coats of a water based 0.00 0.00
UV
resistant Evercrete Top Seal sealant to protect natural stone,
bricks, concrete and wooden structures from water intrusion
and staining due to water penetration and algue formation e
tc complete

Providing and applying required coats of a water based 0.00 0.00

Evercrete Deep Penetrating Sealer (DPS) on cement concrete
surface like roads, beams, and columns, plastered walls,
basements, roofs, potable water tanks etc to react with cem
ent
and to penetrate concrete structure thereby making it resist
ant
to chemicals / chlorides water to make it dust proof and to a
ct
as a water resistant at the same time which Strengthens the
treated surface and reduce the curing period etc complete.
Note for item no. 7 to 4 prior approval of Superintending
Engineer will be necessary

Providing and laying 3 course water proofing treatment 0.00 0.00

on terrace slab with tar felt as per I.S.I. code of practice.
Providing and admixing bipolar, migratory, integral, concrete 0.00 0.00
penetrating corrosion inhibiting admixture POLYALK CP 293 ?
Sunanda make or equivalent at a dose of 3 Kg per cum of
concrete. Inhibitor should be non nitrite based and have the
ability  to  provide  corrosion  protection  to  both  anodic
and cathodic  sites  on  the  steel  surface.  Inhibitor  should
form
polydentate complexes with the steel surface to promote pr
oper
film formation. Inhibitor must not have any adverse effect o
n
concrete compressive strength. This may be established thro
ugh laboratory  test  results  from  independent  laboratory.
Inhibitor shall  have  test  reports  from  accredited
laboratory  indicating
significant reduction in corrosion after accelerated corrosion
test
based on JIS Z 1535. Further inhibitor must have undergone
long term performance tests as per ASTM G1 and ASTM G3
indicating rebar weight loss of less than 5 mpy for both tests
.
Inhibitor should demonstrate a corrosion rate of zero colum
bs as per ASTM G 109 2005 (For all types of RCC Works)
Removing  loose  rust  from  the  reinforcement  bars  by   0.00 0.00
wire brushing,  light  hammering  etc.  and  applying
sulphate  and chloride  free  inorganic  single  component
rust  remover
(RUSTICIDE   SUNANDA MAKE or equivalent) conforming to I
S 9077.  The  rusted  surface  shall  become  blackish  non
rusted
colour. After 24 hours of application of rust remover, loose
particles  shall  be  removed  by  brush.  Applying  bonding
coat
slurry of high performance acrylic polymer (POLYALK EP @ 0.
25 kgs per sqm   SUNANDA MAKE or equivalent) . Mix 1 kg of
Polyalk EP with 0.5Kg of cement and finish wet on wet with
ready  to  use  repair  polymer  modified  mortar  (SUNMIX
SUNANDA MAKE or equivalent). by adding 13  16% water by
weight  of  SUNMIX  for  treatment  to  the  damaged  RCC
members.After  mixing  SUNMIX  can  be  sprayed  or  trowel
applied. When applying by hand SUNMIX must be forced tig
htly into  the  substrate  to  ensure  complete  contact  with
the substrate.  Upto average 40mm thickness
Removing  loose  rust  from  the  reinforcement  bars  by   0.00 0.00
wire brushing,  light  hammering  etc.  and  applying
sulphate  and chloride  free  inorganic  single  component
rust  remover
(RUSTICIDE   SUNANDA MAKE or equivalent) conforming to I
S 9077.  The  rusted  surface  shall  become  blackish  non
rusted
colour. After 24 hours of application of rust remover, loose
particles  shall  be  removed  by  brush.  Applying  bonding
coat
slurry of high performance acrylic polymer (POLYALK EP @ 0.
25 kgs per sqm   SUNANDA MAKE or equivalent) . Mix 1 kg of
Polyalk EP with 0.5Kg of cement and finish wet on wet with
ready  to  use  repair  polymer  modified  mortar  (SUNMIX
SUNANDA MAKE or equivalent). by adding 13  16% water by
weight  of  SUNMIX  for  treatment  to  the  damaged  RCC
members.After  mixing  SUNMIX  can  be  sprayed  or  trowel
applied. When applying by hand SUNMIX must be forced tig
htly into  the  substrate  to  ensure  complete  contact  with
the substrate. Upto average 20mm thickness

Providing and installing zinc based galvanic disk type anodes 0.00 0.00

(SUNANODE     SUNANDA  MAKE  or  equivalent)  to  the
reinforcement at 1m c/c or as directed by EIC. The anode sha
ll
be connected to the reinforcement steel by connectors provi
ded
with the anode. Sunanodes should pass 500 hours salt spray
test as per ASTM B117
Check  the  existing  waterproofing  treatment  for   0.00 0.00
ascertaining
damaged portion. Break open the damaged portion to expos
e
the bare slab and fill the same with screed in proportion 1:2:
4 with  10  mm  down  aggregates  and  adding  shrinkage
compensating  admixture  (SUNPLEX     SUNANDA  MAKE  or
equivalent) and finish it properly to match with the surface
around the patch. Open and fill the cracks with Flexiroof PU.
Clean  the  entire  surface  thoroughly  and  over  this
prepared surface,  apply  primer  +  two  coats  of  single
component
elastomeric waterproof coating (SUNKOTE @ 1.2 kgs per sq
m SUNANDA  MAKE  or  equivalent).  SUNKOTE  shall
conform  to
Flexibility and adhesion as per IS 101 and DIN 1048 for water
impermeability.  Over  this  waterproofing  treatment,
provide
average 40 mm thick IPS as a protecting layer and finish it
properly. When IPS is still wet lines shall be marked to get 30
0 X 300 mm pattern, to avoid shrinkage cracks. (For flat roof
only)
Check  the  existing  waterproofing  treatment  for   0.00 0.00
ascertaining
damaged portion. Break open the damaged portion to expos
e
the bare slab and fill the same with screed in proportion 1:2:
4 with  10  mm  down  aggregates  and  adding  shrinkage
compensating  admixture  (SUNPLEX     SUNANDA  MAKE  or
equivalent) and finish it properly to match with the surface
around the patch. Open and fill the cracks with Flexiroof PU.
Clean  the  entire  surface  thoroughly  and  over  this
prepared surface,  apply  primer  +  two  coats  of  single
component
elastomeric waterproof coating (SUNKOTE @ 1.2 kgs per sq
m SUNANDA  MAKE  or  equivalent).  SUNKOTE  shall
conform  to
Flexibility and adhesion as per IS 101 and DIN 1048 for water
impermeability.  Over  this  waterproofing  treatment,
provide
average 15 mm thick plaster as a protecting layer and finish i
t properly. (For Sloping roof only)
Providing  and  applying  a  coat  of  anti  fungal  treatment 0.00 0.00
(SUNANTIFUNGAL SP   SUNANDA MAKE or equivalent) to en
tire
surface of wall. Applying one coat of polymeric water proofi
ng
coating (POLYALK WP @ 0.2 kgs per sqm   SUNANDA MAKE o
r
equivalent) having a breathable non toxic acrylic polymer liq
uid
and white cement mix in proportion 1:1 by weight with coat
interval  as  24  hours.  Air  curing  shall  be  done  for  24
hours.Polyalk WP shall conform to Flexibility and adhesion a
s per  IS  101  and  DIN  1048  for  water  impermeability.
Before giving  this  treatment  the  entire  surface  of  wall
shall  be
thoroughly clean to remove existing paint, dust, dirt, etc. Th
e
cracks, if any, shall be filled with acrylic polymeric non shrin
k
crack filler putty ? POLYFILL AR, before giving waterproofing
treatment to the external surfaces. Applying Waterproof, an
ti
carbonation, anti fading, mould resistant, heat insulating, an
d
100% acrylic breathable decorative external coating (SUNEX
T 8
@ 0.4 ltrs @ sqm   SUNANDA MAKE or equivalent) Mix 1 L of
with 400ml of water, stir well and apply by brush for two coa
ts. Applying two coats at an interval of 4
6 hours between each coat
Providing and applying primer + two coats of 100% acrylic 0.00 0.00
breathable,  waterproof,  heat  insulating,  anti carbonation
decorative  external  paint  (SUNEXT  8  @  0.6  ltrs  per
sqmSUNANDA MAKE or equivalent. )Before giving this treat
ment the entire  surface  of  wall  shall  be  thoroughly
clean  to  remove
existing paint, dust, dirt, oil etc. The cracks, if any, shall be
filled with acrylic polymeric non shrink auto suction crack fill
er
putty (POLYFILL AR  SUNANDA MAKE or equivalent) conformi
ng to  the  specifications  given  in  this  tender  document,
before giving  painting  treatment  to  the  external
surfaces.On  such prepared  surface,  apply  primer+  two
coats  of  100%  acrylic breathable,  waterproof,  heat
insulating,  anti carbonation decorative  external  paint
(SUNEXT  8     SUNANDA  MAKE orequivalent).  Acrylic  paint
shall  conform  to  the  following properties.  1.  Carbon
dioxide  diffusion  equivalent  air  layer thickness  (DIN  EN
1062 6)  >  100  m  2.  Carbon  dioxide diffusion resistance co
efficient (DIN EN 1062 6) more than 105
3. Chloride Ion Diffusion(ASTM C 1202) = Zero Penetration 4.
Adhesion  (ASTM  D  4541)  >  2  N/mm2  5.  Solar
Reflectance Index (ASTM E 1980
11, EN 673:2011, EN 410:2011) > 100

Providing internal cement plaster 6 mm thick in a single coat 0.00 0.00

in
cement mortar 1:4 without neeru finish to concrete surface i
n all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 6 mm thick in a single coat 0.00 0.00

in
cement mortar 1:3 without neeru finish to concrete surface i
n all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm thick in single coat i 0.00 0.00

n
cement mortar 1:5 without neeru finish to concrete or brick
surfaces, in all positions including scaffolding and curing etc.
complete.
Providing internal cement plaster 12mm thick in single coat i 0.00 0.00
n
cement mortar 1:4 without neeru finish to concrete or brick
surfaces, in all positions including scaffolding and curing etc.
complete.

Providing internal cement plaster 12mm thick in single coat i 0.00 0.00

n
cement mortar 1:3 without neeru finish to concrete or brick
surfaces, in all position including scaffolding and curing etc.
complete.

Providing internal cement plaster 20mm thick in two coats in 0.00 0.00

cement mortar 1:5 without neeru finish, to concrete,
brick
surface, in all positions including scaffolding and curing etc.
complete

Providing internal cement plaster 20mm thick in two coats in 0.00 0.00

cement mortar 1:4 without neeru finish, to concrete,
brick surface, in all positions including scaffolding and
curing etc.complete.

Providing internal cement plaster 20mm. thick in two coats i 0.00 0.00

n cement mortar 1:3 without neeru finish, to concrete,
brick
surface, in all positions including scaffolding and curing etc.
complete.

Providing internal cement plaster 25mm thick in two coats in 0.00 0.00

cement mortar 1:4 without neeru finish, to concrete, brick o
r
stone surfaces, in all positions including scaffolding and curi
ng etc.complete.

Providing internal cement plaster 20mm thick in single coat i 0.00 0.00

n cement mortar 1:3 without neeru finish to stone
masonry
surfaces, in all positions including scaffolding and curing etc.
complete.
Providing sand faced plaster externally in cement mortar usi 0.00 0.00
ng
approved screened sand, in all positions including base coat
of 15 mm thick in cement mortar 1:4 using
waterproofing
compound at 1 kg per cement bag curing the same for not le
ss
than 2 days and keeping the surface of the base coat rough t
o
receive the sand faced treatment 6 to 8 mm thick in cement
mortar 1:4 finishing the surface by taking out grains and curi
ng for fourteen days scaffolding etc.complete.

Providing rough cast cement plaster externally in two coats t 0.00 0.00

o
concrete, brick or stone masonry surfaces in all positions wit
h base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast
treatment 12mm thick in proportion 1:1 1/2:3 including
scaffolding and fourteen days curing complete.

Providing rough cast cement plaster externally in two coats 0.00 0.00

with coloured  cement  finish  to  concrete/  brick/  stone
masonry
surfaces in all positions with base coat 12 to 15 mm. thick in
C.M. 1:4 using gray cement and rough cast treatment 12 mm
thick in proportion of 1:1 1/2:3 using colour pigment includi
ng scaffolding and fourteen days curing etc. complete.
Providing  and  applying  Texture  plaster  with  finishing   0.00 0.00
with
Purlina/ Rustic texture material (with texture material of Asi
an/
Renava/ Nitco/ Temtex or equivalant company make) in 3 to
4 milimeter  thickness  on  previously  finished  plastered
surface
including plaster Groove 6mm thick or Tape Grooves 35 to 4
5
mm thickness or as required in all postion including preparin
g
the surface scaffolding etc. complete. ( Excluding texture Pai
nt and  Texture  Paint  Finishing)  (Prior  permission  of  S.E.
is required before inclusion of this item in the estimate)

Providing neeru finish to plastered surfaces in all 0.00 0.00

positions including scaffolding and curing etc. complete.

Providing flush grooved pointing with cement mortar 1:3 for 0.00 0.00

brick work including scaffolding and curing etc. complete.

Providing flush grooved pointing with cement mortar 1:3 for 0.00 0.00

stone masonry work including scaffolding and curing etc.
complete.

0.00 0.00
Providing tuck pointing with cement mortar 1:3 for stone/Br
ick masonry including scaffolding and curing etc. complete.

0.00 0.00
Providing weathered pointing with cement mortar 1:3 for st
one/
Brick masonary including scaffolding and curing etc. complet
e.

0.00 0.00
Providing vee pointing with cement mortar 1:3 for stone / Br
ick masonry including scaffolding and curing etc. complete

Plastering and Pointing 32.21 BDL 0.00 0.00

Providing fine cement finish 1.5 mm thick over green plaster
surface including scaffolding curing etc. complete.
Labour charges for providing groove in external plaster havin 0.00 0.00
g width and spaced as directed by engineer incharge
etc. complete.

Providing patti/ band 75mm wide on plastered surface 12 m 0.00 0.00

m to 15 mm thick in C.M. 1:3 line and level including
neat finishing scaffolding curing etc. complete.

Providing patti/ band 100mm wide on plastered surface 12 0.00 0.00

mm to 15 mm thick in C.M. 1:3 line and level including
neat finishing scaffolding curing etc. complete.

Providing patti/ band 150mm wide on plastered surface 12 0.00 0.00

mm to 15 mm thick in C.M. 1:3 line and level including
neat finishing scaffolding curing etc. complete.

Providing and fixing chicken mesh of 22 gauge, with about 3 0.00 0.00

0
cm. width at the junction of R.C.C members and brick work,
of
approved quality including fixing mesh in position by necess
ary
drilling in concrete /B.B.masonry and or tying by binding wir
e etc. complete.

Providing and applying plaster with plaster of paris in 6mm 0.00 0.00

thickness to previously plaster surface in all position includin
g preparing the surface scaffolding etc. complete.

Providing and applying spray plaster made with finely grade 0.00 0.00

d
marble and quartz in 2 mm thickness in two coats using putt
y knife  or  trowel  to  newly  plaster  fairly  even  surface
after
minimum 30 days gap in all position including finishing the
surface using zero number sand paper or fine emry paper ge
ntly
level the area by moving paper in round circles removing the
dust  and  clean  the  surface  with  dry  cloth  and
scaffolding including all materials and labour etc. complete.
Providing and applying laying Aggregate plaster in granite / 0.00 0.00
marble stones, as decorative finish to give granite / marble li
ke
appearance to concrete, brick or block surfaces in all positio
n
including preparation of surface smoothly, evenly by racking
of
joints in case of Brick or block work including backing layer o
f
12 mm thick with cement mortar 1:3 with 2% integral cemen
t water  proofing  compound,  roughening  for  wall  keying
hardening and drying the surface for a minimum five days ga
ps
including second coat of cement lime mortar into a proporti
on
1:4 preparing the surface for three coat of marble finish plas
ter
giving a thin coat of white cement and two parts of course
calcite  powder,  applying  the  mortar  with  steel  float  on
the
surface in proper evenness applying at coat of white cement
and lime to set a smooth finish then applying a thin coat of
slurry made of white cement and black oxide colour in requi
red
proportion by the steel float to get black streaks on the surfa
ce
and curing the surface for two days including all materials an
d labour etc. complete.

Providing and applying plaster / wall punning with plaster of 0.00 0.00

paris ( with plaster of paris material of Ambuja / Mor Chap o
r
equivalent make ) in 10 to 13 millimeter thickness to previou
sly
plastered surface / or on newly brick surface ( Excluding rou
gh
cast plaster ) in all position including preparing and Finishing
the surface scaffolding etc.complete.
Providing and applying gypsum plaster ( with Gypsum mater 0.00 0.00
ial of Gypsum India / Mega Sign or equivalent make )
with
finishing with gypsum material in 10 to 13 millimeter thickn
ess
to previously plastered surface / or on newly brick surface (
Excluding rough cast plaster ) in all position including
preparing and Finishing the surface scaffolding etc.complete.

Providing and applying Texture plaster with finishing 0.00 0.00

with
Purlina / Rustic texture material ( with texture material of As
ian / Renava / Nitco/Temtex or equivalent company make ) i
n 3 to
4 millimeter thickness on previously finished plastered surfa
ce
,including Plaster Groove 6mm thickness or Tape Grooves 35
to 45 mm thickness or as required, in all position
including preparing the surface scaffolding etc.complete.

Removing the existing cement plaster of any thickness witho 0.00 0.00

ut
causing dust nuisance and stacking the debris upto a distanc
e
of 50 metres or spreading in the compound and cleaning the
site etc. complete. Note : Following items to be executed aft
er prior approval of Superintending Engineer.

Providing and applying Two coats of wall care Putty of 2mm 0.00 0.00

thickness for plastered surface and 5 6mm thickness finished
concrete surface to Ceiling and Walls to prepare surface eve
n and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K.,
make, etc complete. a) For plastered walls/ceiling 2mm
Providing and applying Two coats of wall care Putty of 2mm 0.00 0.00
thickness for plastered surface and 5 6mm thickness finished
concrete surface to Ceiling and Walls to prepare surface eve
n and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K.,
make, etc complete. b) For finished concrete walls/ceiling 5 t
o 6mm

Providing cement patta / band of 2.50 cm width on either si 0.00 0.00

de
of edges of plaster for doors & windows including scaffoldin
g ,finishing, curing etc. complete.

Providing groove to required size at specified location as 0.00 0.00

directed by Engineer, at junction of brick masonry wall and
R.C.C beams or Column, at junction of composite
masonry,
including scaffolding, finishing, curing etc. complete.

Providing and laying Rough Shahabad Stone Flooring 25mm 0.00 0.00

to
30mm thick and of required width in plain/ diamond pattern
on a  bed  of  1:6  C.M.  including  cement  float,  striking
joints, pointing  in  cement  mortar  1:3  curing  and
cleaning  etc. complete.

Providing and laying Rough Shahabad Stone Flooring 40mm. 0.00 0.00

to
45 mm. thick & of required width in plain/ diamond pattern
on a bed of 1:6 C.M. including cement float, striking
joints,
pointing in cement mortar 1:3 curing and cleaning etc. etc.
complete

Providing and laying Rough Shahabad Stone Flooring 50mm 0.00 0.00

to
60mm thick and of required width in plain/ diamond pattern
on a bed of 1:6 C.M. including cement float, striking
joints,
pointing in cement mortar 1:3 curing and cleaning etc. etc.
complete.
Providing and laying Polished Shahabad Stone flooring 25m 0.00 0.00
m to 30mm thick and required width wide in plain/
diamond
pattern on a bed of 1:6 C.M. including cement float, filling
joints, with neat cement slurry, curing, polishing and cleanin
g etc. complete.

Providing and laying Polished Tandur Stone flooring 25mm t 0.00 0.00

o
30mm thick required width in plain/ diamond pattern on a b
ed of 1:6 C.M. including cement float, filling joints with
neat
cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying machine cut machine Polished Kota sto 0.00 0.00

ne
flooring 25mm to 30mm thick and required width in plain/
diamond pattern on bed of 1:6 C. M. including cement float,
filling joints with neat cement slurry, curing, polishing
and cleaning etc. complete.

Providing and laying handcut polished Kotah Stone 0.00 0.00

flooring
25mm to 30mm thick and 30cm wide in plain/diamond patt
ern
on a bed of 1:6 C.M. including cement float, filling joints wit
h neat cement slurry, curing, polishing and cleaning etc.
complete.

Providing and laying polished hand cut Kotah Stone flooring 0.00 0.00

25mm to 30mm thick and 45cm to 55cm wide in
plain/diamond pattern on a bed of 1:6 C.M. including cemen
t float, filling joints with neat cement slurry, curing, polishing
and cleaning complete.
Providing and laying cement concrete flooring 40 mm thick 0.00 0.00
with M15 cement concrete laid to proper level and slope in
alternate bays including compaction, filling joints, marking li
nes
to give the appearance of tiles of 30 cm x 30 cm or other size
laid diagonally /square etc finishing smooth (with extra cem
ent)
in any colour as directed and curing etc. complete. With Nat
ural Sand

Providing and laying cement concrete flooring 40 mm thick 0.00 0.00

with M15 cement concrete laid to proper level and slope in
alternate bays including compaction, filling joints, marking li
nes
to give the appearance of tiles of 30 cm x 30 cm or other size
laid diagonally/ square etc finishing smooth (with extra cem
ent) in any colour as directed and curing etc. complete.
With Crushed Sand.

Providing and laying cement concrete flooring 40mm thick w 0.00 0.00

ith
M20 cement concrete laid to proper level and slope in altern
ate
bays, including compaction, filling joints, marking lines to giv
e appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc. finishing smooth (with extra cement)
in
any colour as directed and Curing etc. complete. With Crush
ed Sand
Providing and laying cement concrete flooring 50 mm thick 0.00 0.00
with M15 cement concrete laid to proper level and slope in
alternate bays including compaction filling joints, marking li
nes
to give the appearance of tiles of 30cm x 30cm or other size
laid diagonally/ square etc finishing smooth (with extra cem
ent)
in any colour as directed and curing etc. complete. With Nat
ural Sand

Providing and laying cement concrete flooring 50 mm thick 0.00 0.00

with M15 cement concrete laid to proper level and slope in
alternate bays including compaction filling joints, marking li
nes
to give the appearance of tiles of 30cm x 30cm or other size
laid diagonally/square etc finishing smooth (with extra ceme
nt) in any colour as directed and curing etc. complete.
With Crushed Sand.

Providing and laying cement concrete flooring 50mm thick w 0.00 0.00

ith
M20 cement concrete laid to proper level & slope in alternat
e
bays including compaction, filling joints, marking lines to giv
e the appearance of tiles of 30cm x 30cm or other size
laid
diagonally/ square etc. finishing smooth (with extra cement)
in
any colour as directed and curing etc. complete. With Crushe
d Sand.
Providing and laying machine cut machine polished shahaba 0.00 0.00
d
Stone slabs 20 to 25mm thick for treads and risers of steps a
nd
staircases, with rounded nosing for the treads on a bed of 1:
4
cement mortar including cement float, filling joints with nea
t cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying machine cut machine polished machine 0.00 0.00

cut Kota stone slabs 20 to 25 mm thick for treads and risers
of
steps and staircases, with rounded nosing for the treads on a
bed of 1:4 cement mortar including cement float, filling joint
s with neat cement slurry, curing, polishing and cleaning etc.
complete.

Providing sills of polished Kota stone 25 mm to 30mm thick, 0.00 0.00

on
a bed of 1:4 cement mortar including cement float, filling joi
nts with slurry, curing polishing and cleaning etc. complete.

Providing sills of polished Kadappa stone 25mm to 30mm thi 0.00 0.00

ck,
on a bed of 1:4 cement mortar including cement float, filling
joints with slurry, curing polishing and cleaning etc. complet
e.

Providing sills of required material 20mm to 25mm thick, on 0.00 0.00

a
bed of cement mortar 1:4 including cement float, filling joint
s with neat cement slurry, curing, polishing, rounding
edges,
cleaning complete. a) Marble other than white makrana

Providing sills of required material 20mm to 25mm thick, on 0.00 0.00

a
bed of cement mortar 1:4 including cement float, filling joint
s with  neat  cement  slurry,  curing,  polishing,  rounding
edges, cleaning complete. b) Granite
Providing and fixing black kadappa stone shelves 25mm. thic 0.00 0.00
k
machine polished, extending the polish upto 20 cm width on
lowerside,  rounding  corners,  laying  in  position  jointing
with bedding  cement  mortar  1:4  proportion  curing  etc
etc. complete.

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asi 0.00 0.00

an or  equivalent  make  having  size  30  cm  x  30  cm
confirming I.S.15622/2006 (group D II
A)and 7 to 8 mm thick for flooring in  required  position  laid
on  a  bed  of  1:4  cement  mortar
including cement float, filling joint with white/colour cemen
t slurry cleaning curing etc. complete.

Providing and laying ceramic tiles of RAK/Kajaria / Nitco /Asi 0.00 0.00

an
or equivalent make having size 30 cm. x 30 cm. for dado and
skirting in required position with readymade adhesive morta
r of approved quality on plaster of 1:2 cement mortar
including
joint filling with white/ colour cement slurry cleaning curing
etc. complete.

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /As 0.00 0.00

ian
or equivalent make having size 30 cm. x 45 cm. for dado and
skirting in required position with readymade adhesive morta
r of approved quality on plaster of 1:2 cement mortar
including
joint filling with white/ colour cement slurry cleaning curing
etc. complete.

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /As 0.00 0.00

ian
or equivalent make having size 30 cm. x 60 cm. for dado and
skirting in required position with readymade adhesive morta
r of approved quality on plaster of 1:2 cement mortar
including
joint filling with white/ colour cement slurry cleaning curing
etc. complete.

Providing Mirror polishing to Kota Stone including using 0.00 0.00

all necessary  stones  and  equipments  cleaning,  washing
etc. complete. For Flooring
Providing  Mirror  polishing  to  Kota  Stone  including  using   0.00 0.00
all necessary  stones  and  equipments  cleaning,  washing
etc. complete. For Skirting

Providing and laying in situ cement concrete M20 with tremi 0.00 0.00

x
treatment for 100 mm thickness for flooring with groove cu
tting of 4mm wide and 20mm deep with necessary
refilling with bitumen etc. complete.

Providing and laying in situ cement concrete M30 with tremi 0.00 0.00

x
treatment for 200 mm thickness for flooring with groove cu
tting of 4mm wide and 20mm deep with necessary
refilling with bitumen etc. complete.

Providing 25 mm to 30 mm thick partition of polished black 0.00 0.00

kadappa stone slab of approved quality including giving
required size and shape etc. Fixing in cement mortar 1:3 curi
ng and cement etc. complete. a) One side polish

Providing 25 mm to 30 mm thick partition of polished black 0.00 0.00

kadappa stone slab of approved quality including giving
required size and shape etc. Fixing in cement mortar 1:3 curi
ng and cement etc. complete. b) Both side polish

Providing and laying in position flooring of telephone black / 0.00 0.00

Amba White / Cat bary brown / Ruby red / Ocean Brown gra
nite
stone of approved shade and size 18 mm to 20 mm thick on
bed 1:6 cement mortar including cement floats striking joint
s, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and fixing machine cut machine polished 18 mm t 0.00 0.00

o
20 mm thick telephone black / Amba White / Cat bary brow
n /
RBI red / Ocean Brown granite stone for treads and risers of
steps and staircases of approved colour and shade with roun
ded
moulding and three grooved line for the treads on bed of 1:4
Cement mortar including float filling joints with neat cement
slurry curing polishing and cleaning etc. complete.
Providing and fixing machine cut mirror polished 18 mm to 2 0.00 0.00
0 mm thick telephone black granite / Amba White / Cat bary
brown / RBI red / Ocean Brown granite stone partition with
rounding the edges etc. complete . Both side polish

Providing and fixing machine cut mirror polished 18 mm to 2 0.00 0.00

0
mm thick telephone black / Amba White / Cat bary brown /
RBI
red / Ocean Brown granite stone partition with rounding the
edges etc. complete. One side polish

Providing and preparing kitchen otta made up from 30 mm 0.00 0.00

thick and 75 cm high vertical support for kadppa at 1 m. c/c
of 25  mm  thick  both  side  polished  kadappa  middle
shelf  and
bottom of 20 mm thick one side polished kadappa with facia
patti  of  20  x  50  mm  kadappa  including  all  material
labour
cutting fixing with cement mortar and araldite curing polishe
d and cleaning etc. complete.

Providing and fixing 1.5 mm thick polyvenyl venyl 0.00 0.00

chloride
flooring including leveling the base with white cement inclu
ding pasting with appropriate material cleaning the
surface etc. complete

Providing and laying vitrified mirror / glossy finish tiles 0.00 0.00

decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent ma
ke
having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to
10 mm thickness and confirming to IS. 15622 2006 ( group
Bla) of approved make, shade and pattern for flooring
in
required position laid on a bed of 1:4 cement mortar includi
ng neat cement float, filling joints, curing and clearing
etc. complete. a) Flooring
Providing and laying vitrified mirror / glossy finish tiles of RA 0.00 0.00
K/
Kajaria/ Nitco/ Asian or equivalent make having size 590 m
m to
605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and
confirming to IS. 15622 2006 ( group Bla) of approved make,
shade and pattern for flooring in required position laid on a
bed
of 1:4 cement mortar including neat cement float, filling join
ts, curing and clearing etc. complete.b) Skirting

Providing and laying vitrified matt fininsh tiles of RAK/ Kajari 0.00 0.00

a/
Nitco/ Asian or equivalent make having size 590 mm to 605
mm x to 605 mm of 8 to 10 mm thickness and confirming IS.
15622
2006 (Group Bla) of approved make, shade and pattern
for flooring in required position laid on a bed of 1:4 cement
morar including neat cement float, filling joints, curing
and cleaning etc. complete. a) Flooring

Providing and laying vitrified matt finish tiles of RAK/ Kajaria 0.00 0.00

/
Nitco/ Asian or equivalent make having size 590 mm to 605
mm x to 605 mm of 8 to 10 mm thickness and confirming IS.
15622
2006 (Group Bla) of approved make, shade and pattern
for flooring in required position laid on a bed of 1:4 cement
mortar including neat cement float, filling joints, curing and
cleaning etc. complete. b) Skirting
Providing and laying vitrified rustic matt stone finish tiles of 0.00 0.00
RAK/Kajaria/ Nitco/ Asian or equivalent make having size 59
0
mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thicknes
s and confirming to IS. 15622 2006 (Group Bla) of approved
make, shade and pattern for flooring in required position lai
d ?
on a bed of 1:4 cement mortar including neat cement float,
filling joints, curing and cleaning etc. complete. a) Flooring

Providing and laying vitrified rustic matt stone finish tiles of 0.00 0.00

RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 5
90
mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thicknes
s and confirming to IS. 15622 2006 (Group Bla) of approved
make, shade and pattern for flooring in required position lai
d ?
on a bed of 1:4 cement mortar including neat cement float,
filling joints, curing and cleaning. etc. complete. b) Skirting

Providing and laying vitrified stone effect finish tiles of 0.00 0.00

RAK/Kajaria/ Nitco/ Asian or equivalent make having size 59
0 to 605 mm x 590 to 605 mm of 8 to 10 mm
thickness and confirming to IS. 15622
2006 (Group Bla) of approved make,
shade and pattern for flooring in required position laid on a
bed
of 1:4 cement mortar including required position laid on a b
ed
of 1:4 cement mortar including neat cement float, filling join
ts, curing and cleaning etc. complete a) Flooring
Providing and laying vitrified stone effect finish tiles of RAK/ 0.00 0.00
Kajaria/ Nitco/ Asian or equivalent make having size 590 to 6
05
mm x 590 to 605 mm of 8 to 10 mm thickness and confirmin
g to IS. 15622 2006 (Group Bla) of approved make, shade and
pattern for flooring in required position laid on a bed of 1:4
cement mortar including required position laid on a bed of 1
:4
cement mortarincluding neat cement float, filling joints, curi
gn and cleaning etc. complete. b) Skirting

Providing and fixing green marble of 18 to 20 mm thick for 0.00 0.00

door frame/ dado/ window boxing etc. On C.M. 1:6 includin
g
filling joints with polymer base filler nosing the sharp edges
wherever necessary, curing, etc. complete.

Providing and fixing heavy duty inter locking concrete 0.00 0.00

Gray
paving blocks of 60 mm thickness of having a strength of 300
kg/Sq.cm. of approved quality and shape on a bed of crushe
d sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete.

Providing and fixing heavy duty inter locking concrete 0.00 0.00

Gray
paving blocks of 80 mm thickness of having a strength of 300
kg/Sq.cm. of approved quality and shape on a bed of crushe
d sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete.

Providing and fixing heavy duty inter locking concrete Colour 0.00 0.00

ed
paving blocks of 60 mm thickness of having a strength of 300
kg/Sq.cm. of approved quality and shape on a bed of crushe
d sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete
Providing and fixing heavy duty inter locking concrete Colour 0.00 0.00
ed
paving blocks of 80 mm thickness of having a strength of 300
kg/Sq.cm. of approved quality and shape on a bed of crushe
d sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete

Providing and fixing heavy duty inter locking concrete RUBB 0.00 0.00

ER
MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness
of having a strength of 400 Kg/sq.m of approved quality
and
shape on a bed of crushed sand of 25 to 30 millimeter thick
including striking joints and cleaning etc. complete.
(using 100% crushed sand)

Providing and fixing heavy duty inter locking concrete Rubbe 0.00 0.00

r mould glossy paving blocks of 80 mm thickness of having a
strength of 400 kg/Sq.cm. of approved quality and shape on
a
bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete. (using 100% crushed sand)

Providing and fixing heavy duty inter locking concrete Colour 0.00 0.00

ed
paving blocks of 40 mm thickness of having a strength of 200
kg/Sq.cm. of approved quality and shape on a bed of crushe
d sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete.

Providing leather finished polishing to Granite Stone slab by 0.00 0.00

continuous grinding in 4 coats of different bits to receive rou
gh and  matt  finish  including  buffing  process  before
laying  and
fixing of stone as per drawing and design, including cleaning,
washing and finishing etc. complete.
Providing leather finished polishing to Kota / Marble / Shaha 0.00 0.00
bad / Kadappa Stone slab by continuous grinding in 4 coats
of different  bits  to  receive  rough  and  matty  finish
including
buffing process before laying and fixing of stone as per drawi
ng and  design,  including  cleaning,  washing  and  finishing
etc. complete.

Providing and laying Vitrified mirror/glossy finish RAK/ Kajar 0.00 0.00

ia
/Nitco / Aisan / Coral Or equivalent make having decorative
type
of size 590 millimeter to 605 millimeter x 590 millimeter to 6
05 millimeter of 8 to 10 millimeter thickness (on a
existing
flooring) with bonding chemical and confirming to IS 156222
006 (Group Bla) of approved make shade and pattern
for
flooring in required position laid on a bed of bonding chemic
al filling joints curing and cleaning etc . complete.

Providing and laying Vitrified MATT finish RAK/ Kajaria /Nitc 0.00 0.00

o /
Aisan / Coral Or equivalent make having decorative type of s
ize
600 millimeter x 600 millimeter of 8 to 10 millimeter thickne
ss
(on a existing flooring) with bonding chemical and confirmin
g to IS 15622 2006 (Group Bla) of approved make shade and
pattern for flooring in required position laid on a bed
of bonding chemical filling joints curing and cleaning
etc .complete.

Providing and laying Vitrified MATT finish RAK/ Kajaria /Nitc 0.00 0.00

o /
Aisan / Coral Or equivalent make having decorative type of s
ize
900 millimeter x 900 millimeter of 8 to 10 millimeter thickne
ss
(on a existing flooring) with bonding chemical and confirmin
g to IS 15622 2006 (Group Bla) of approved make shade and
pattern  for  flooring  in  required  position  laid  on  a  bed
of bonding  chemical  filling  joints  curing  and  cleaning
etc .complete.
Providing and laying Vitrified MATT finish RAK/ Kajaria /Nitc 0.00 0.00
o /
Aisan / Coral Or equivalent make having decorative type of s
ize 1000  millimeter  x  1000  millimeter  of  8  to  10
millimeter
thickness (on a existing flooring) with bonding chemical and
confirming to IS 15622 2006 (Group Bla) of approved make
shade and pattern for flooring in required position laid on a
bed of  bonding  chemical  filling  joints  curing  and
cleaning  etc .complete.

Providing and laying Vitrified RUSTIC MATT STONE finish RA 0.00 0.00

K/ Kajaria  /Nitco  /  Aisan  /  Coral  Or  equivalent  make
having
decorative type tiles of size 600 millimeter x 600 millimeter
of 8
to 10 millimeter thickness (on a existing flooring) with bondi
ng chemical  and  confirming  to  IS  15622 2006  (Group  Bla)
of approved  make  shade  and  pattern  for  flooring  in
required
position laid on a bed of bonding chemical filling joints curin
g and cleaning etc. complete.

Providing and laying Vitrified RUSTIC MATT STONE finish RA 0.00 0.00

K/ Kajaria  /Nitco  /  Aisan  /  Coral  Or  equivalent  make
having
decorative type tiles of size900 millimeter x 900 millimeter o
f 8
to 10 millimeter thickness (on a existing flooring) with bondi
ng chemical  and  confirming  to  IS  15622 2006  (Group  Bla)
of approved  make  shade  and  pattern  for  flooring  in
required
position laid on a bed of bonding chemical filling joints curin
g and cleaning etc. complete.

Providing and laying Vitrified RUSTIC MATT STONE finish RA 0.00 0.00

K/ Kajaria  /Nitco  /  Aisan  /  Coral  Or  equivalent  make
having
decorative type tiles of size1000 millimeter x 1000 millimete
r of 8  to  10  millimeter  thickness  (on  a  existing  flooring)
with bonding chemical and confirming to IS 15622
2006 (Group Bla)  of  approved  make  shade  and  pattern
for  flooring  in required  position  laid  on  a  bed  of
bonding  chemical  filling
joints curing and cleaning etc. complete.
Providing  and  laying  Vitrified  STONE  EFFECT  FINISH  RAK/ 0.00 0.00
Kajaria  /Nitco  /  Aisan  /  Coral  Or  equivalent  make
having
decorative type tiles of size 590 millimeter to 605 millimeter
x
590 millimeter to 605 millimeter of 8 to 10 millimeter thickn
ess
(on a existing flooring) with bonding chemical and confirmin
g to IS 15622 2006 (Group Bla) of approved make shade and
pattern  for  flooring  in  required  position  laid  on  a  bed
of bonding  chemical  filling  joints  curing  and  cleaning  etc.
complete.

Providing and laying chequered tiles of approved quality 0.00 0.00

of
company RAK / Kajaria / Nitco / Asian or equivalent make of
size 30 cm x 30 cm for flooring in required position laid on a
bed of 1:4 cement mortar including cement float, filling joint
with cement slurry cleaning curing etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quali 0.00 0.00

ty
of company RAK / Kajaria / Nitco / Asian or equivalent make
of size 30 cm x 30 cm and confirming to IS 15622
2006 (Group B
IIA) for antiskid flooring in required position laid on a bed of
1:4 cement mortar including cement float, filling joint
with cement slurry cleaning curing etc. complete.

Providing and laying telephone black / Amba White / 0.00 0.00

Cadburybrown / Ruby red / Ocean Brown granite stone of 1
8 to
20 mm thick for door frame/ dado/ window boxing etc. On
C.M. 1:6 including filling joints with polymer base filler nosin
g the sharp edges wherever necessary, curing, etc. complete.
Providing Half round Moulding ( Full Moulding ) to 18 mm to 0.00 0.00
20 mm thick granite stone including fine polishing and cleani
ng etc. complete

Providing Full round Moulding ( Full Moulding ) to 18 mm to 0.00 0.00

20 mm thick Marble / Kota stone including fine polishing an
d cleaning etc. complete.

Providing Quarter 0.00 0.00

round Moulding ( Half Moulding ) to 18 mm to 20 mm
thick granite stone including fine polishing and
cleaning etc. complete.
Providing Quarter 0.00 0.00
round Moulding ( Half Moulding ) to 18 mm
to 20 mm thick Marble / Kota stone including fine polishing
and cleaning etc. complete.

Providing Chamfer Of Required size to granite stone includin 0.00 0.00

g fine polishing and cleaning etc. complete.
Providing Chamfer of Required size to 18 mm to 20 mm thick 0.00 0.00
Marble / Kota stone including fine polishing and cleaning etc
. complete

Providing and laying Polished Kota stone flooring With Hand 0.00 0.00

Cut Polished Kota Stones 25mm to 30mm thick and required
width in plain/diamond pattern on bed of 1:6 Cement morta
r
including cement float, filling joints with neat cement slurry,
curing, cleaning and Mirror Polishing etc. complete Note  Wa
ter absorption for item No,19 should not exceed 0.05%.
( Item to
be used with prior permission of Superintending Engineer )
Providing,  laying  &  fixing  exterior  grade  fibrilling  fibre 0.00 0.00
reinforcement  heavy  duty  designer  cement  concrete  tiles
for Flooring of approved colour and design 22 +/  2 mm thick
bayer  colour  pigmented  as  per  IS  ..1237     1980  having
compressive  strength  more  than  500  kg/sq.cm
reaffirmed  in
2006 ,having wert transvrse strenghth of 3.5 / mm 2, water
absorption less than 10 % abrasion / wear resistance less tha
n 2 mm  ,skid  resistance  more  than  25.0  (ASTM:E303)
and  no fading  as  per  DIN     51094  like  ultra  tiles  300  x
300  or
equivalent ,in plan / designed pattern on a bed of 1:4 cemen
t
mortar including cement float ,filling joints with neat cemen
t slurry  ,curing,  polishing  and  cleaning  etc.  complete.  For
flooring.

Providing, laying & fixing exterior grade fibrilling fibre 0.00 0.00

reinforcement  heavy  duty  designer  cement  concrete  tiles
for steps and dado of approved colour and design 22 +/
2 mm
thick bayer colour pigmented as per IS ..1237   1980 reaffirm
ed
in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, wate
r
absorption less than 10 % abrasion / wear resistance less tha
n 2 mm  ,skid  resistance  more  than  25.0  (ASTM:E303)
and  no
fading as per DIN   51094 like ultra tiles or equivalent ,in plan
/ designed  pattern  on  a  bed  of  1:4  cement  mortar
including cement  float  ,filling  joints  with  neat  cement
slurry ,curing,polished  and  cleaning  etc.  complete.  For
steps,  and dado

Machine polishing to cement/marble mosaic tiled flooring o 0.00 0.00

r any other type of flooring including cleaning, washing, etc.
complete.

Hand polishing to dado, skirting including cleaning, washing 0.00 0.00

etc. complete.

Providing wax polishing to floors and dado, preparing 0.00 0.00

the surface, scaffolding etc. complete.
Providing and applying boiled linseed oil in one coat, to the 0.00 0.00
new wood work, including knotting, preparing the
surface, scaffolding etc. complete as directed.

Providing and applying boiled linseed oil in two coats to the 0.00 0.00

new wood work, including knotting, preparing the
surface, scaffolding etc. complete as directed.

Providing and applying Wax polish to the new wood 0.00 0.00

work including knotting, preparing the surface,
scaffolding etc. complete as directed.

Providing and applying Wax polish to the old wood 0.00 0.00

work including knotting, preparing the surface,
scaffolding etc. complete as directed.

Providing and applying French polish for required finish 0.00 0.00

on previously polished wood including knotting,
preparing the surfaces, scaffolding etc. complete as directed

Providing & applying french polish to new wood work, 0.00 0.00

for
required finishing including. knotting, preparing the surfaces
, scaffolding etc. complete as directed.

Providing and applying varnish in one coat on 0.00 0.00

previously
varnished wood work including knotting, preparing the surfa
ce, scrapping, scaffolding, etc. complete.

Providing and applying Varnish in two coats on new wood w 0.00 0.00

ork including knotting, preparing the surface, scaffolding
etc. Complete.

Providing and applying melamine polish of required finish to 0.00 0.00

the  wood  work  by  spray  machine  including  knotting  and
preparing the even surface by scraping, applying French poli
sh , scaffolding  if  required  etc.  complete.  Note:The  work
to  be
executed on prior approval of Superintending Engineer will b
e necessary.

Providing and applying coal tar in one coat on previously coa 0.00 0.00

l
tarred wood including preparing the surface, scaffolding etc.
complete.

Providing and applying coal tar in two coats on new wood w 0.00 0.00

ork
including preparing the surface, scaffolding etc. complete. (c
oal tar shall be minimum 500 grams per Sqm.)
Providing and applying two coats of lead/zinc base oil paint/ 0.00 0.00
bituminous paint of approved colour and shade to new woo
d
work and fiber boards including preparing the surface, kno
tting,
scaffolding if necessary, excluding primer coat etc. complete.

Providing and applying one coat of lead/zinc base oil paint/ 0.00 0.00

bituminous paint of approved colour and shade to old wood
work previously painted and fiber boards including if necess
ary scaffolding, preparing surface excluding primer coat
etc. complete.

Providing and applying two coats of lead/zinc base oil 0.00 0.00

paint/bituminious paint of approved colour and shade to old
wood work and fiber boards previously painted
including if
necessary scaffolding, preparing the surface excluding primi
ng coat etc. complete.

Providing & applying two coats of lead/zinc base oil 0.00 0.00

paint/
bituminious paint of approved colour to new structural steel
work and iron work in buildings including scaffolding if
necessary, cleaning and preparing the surface etc. complete.
(excluding primer coat).

Providing and applying one coat of aluminium paint of 0.00 0.00

approved make to new structural steel work in building and
workshop including scaffolding if necessary, cleaning and
preparing surface (excluding primer coat) etc. complete.

Providing and applying 2 coats of alluminium paint of appro 0.00 0.00

ved
make to new structural steel work in buildings and worksho
ps
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat)etc. complete.
Providing and applying two coats of synthetic enamel paint 0.00 0.00
of
approved colour to new /old structural steel work and wood
work in buildings, including scaffolding if necessary, cleaning
and preparing the surface (excluding primer coat) etc.
complete.

Providing and applying one coat of flat oil paint of approved 0.00 0.00

colour to the old structural steel work and iron work previou
sly
painted in building including scaffolding, if necessary, cleani
ng
and preparing surface (excluding primer coat) etc. complete.

Providing and applying two coats of flat oil paint of approve 0.00 0.00

d
colour to the old structural steel work and iron work previou
sly
painted in building including scaffolding, if necessary, cleani
ng and preparing the surface (excluding primer coat) etc.
complete.

Providing and applying one coat of flat oil paint of approved 0.00 0.00

colour and shade to internal / external plastered
surfaces
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) etc. complete.

Providing and applying two coats (exterior quality) of flat oil 0.00 0.00

paint of approved colour and shade to the plastered surface
in buildings  and  workshops  including  scaffolding  if
necessary, cleaning  the  surface  and  preparing  surface
etc.  complete. (excluding primer coat)

Providing and applying two coats of flat oil paint of approve 0.00 0.00

d colour and shade to internal / external plastered
surfaces
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) etc. complete.
Providing and applying two coats of water proof cement pai 0.00 0.00
nt of approved manufacture and of approved colour to
the
plastered surfaces including scaffolding if necessary, cleaning
and preparing the surface, watering for two days etc. comple
te.

Providing and applying two coats of water proof cement pai 0.00 0.00

nt of approved manufacture and of approved colour to
old
plastered surfaces including scaffolding if necessary, cleaning
and preparing the surface, watering for two days etc. comple
te.

Providing and applying three coats of water proof cement pa 0.00 0.00

int of approved manufacture and of approved colour to
new
plastered surfaces including scaffolding if necessary, cleaning
and preparing the surface, watering for two days etc. comple
te.

Providing and applying three coats of water proof cement pa 0.00 0.00

int of approved manufacture and of approved colour to
old
plastered surfaces including scaffolding if necessary, cleaning
and preparing the surface, watering for two days etc. comple
te.

Oil Painting 35.17 0 0 0 0 NA NA 0.00 0.00

Removing old paint from steel and other metal surfaces and 0.00 0.00
making the surfaces even with hand scrapping, scaffolding et
c. complete.

Providing and applying priming coat over new wood and wo 0.00 0.00

od
based surfaces, including preparing the surface by thoroughl
y cleaning oil, grease, dirt and other foreign matter,
sand papering and knotting, scaffolding etc. complete.
Providing and applying priming coat over new/old steel and 0.00 0.00
other metal surfaces including preparing the surface by
thoroughly cleaning oil, grease, dirt and other foreign matter
and scoured with wire brushes, fine steel wool, scrappers an
d sand paper, scaffolding etc. complete.

Providing and applying priming coat on concrete/ masonary 0.00 0.00

/ Asbestos  Cement  plastered  surfaces  including
scaffolding  if necessary,  preparing  the  surface  by
thoroughly  cleaning  oil, grease,  dirt  and  other  foreign
matter  and  sand  papering  as required etc. complete.

Providing and applying one coat of seal cement primer 0.00 0.00

of
approved manufacture and shed including scaffolding prepar
ing the surface by cleaning dirt and other foreign
matters,
scrapping if necessary including scaffolding etc. complete.

Providing and applying pearl/ luster finish paint of approved 0.00 0.00

colour  and  shade  to  the  existing  plaster  surface
including scaffolding,  preparing  the  surface,  applying  the
acrylic  wall putti etc. complete.

Providing and applying two coats of textured synthetic paint 0.00 0.00

of approved shade and quality and one coat of primer
before applying textured paint including scaffolding if
necessary
preparing surface by thoroughly cleaning oil, grease, dirt and
other materials as required, etc. complete.

Providing and applying two coats of appex Appex Ace white 0.00 0.00

exterior paint of approved manufacture and of approved col
our to  the  plastered  surfaces  including  cleaning
,preparing  the
plaster surface ,applying primer coat ,scaffolding if necessar
y , and watering the surface for two days etc complete.
Providing  and  applying  two  coats  of  exterior  white   0.00 0.00
weather
shield paint of approved manufacture and of approved colou
r to  the  plastered  surfaces  including  cleaning  ,preparing
the
plaster surface ,applying primer coat ,scaffolding if necessar
y ,
and watering the surface for two days etc complete. NOTE: F
or
Item No. 15 to 18 prior approval of Superintending Engineer
will be necessary

Removing old paint from steel and other metal surface with 0.00 0.00

flame, cleaning and making the surface even and scaffolding
etc. complete.

Removing old paint from steel and other metal surface with 0.00 0.00

hand scrapping, cleaning and making the surface even
and scaffolding etc. complete.

0.00 0.00
Providing and applying primer coat for wall surface to receiv
e oil bound distemper treatment etc. complete.

Providing and applying white wash in one coat on old / new 0.00 0.00

plastered or masonry surfaces and asbestos cement
sheets
including scaffolding and preparing the surface by brushing
& brooming down etc. complete.

Providing and applying white wash in two coats on old / new 0.00 0.00

plastered or masonry surfaces and asbestos cement
sheets
including scaffolding and preparing the surface by brushing
& brooming down etc. complete.

Providing and applying colour wash of approved colour and 0.00 0.00

shade in one coat to new surface including scaffolding,
brushing and brooming down (excluding base coats of white
wash) etc. complete.

Providing and applying colour wash of approved colour and 0.00 0.00

shade in two coats to new surface including scaffolding,
brushing and brooming down (excluding base coat of white
wash) etc. complete.
Providing and applying colour wash of approved colour and 0.00 0.00
shade in one coat to old surfaces which are to be recoloured
including scaffolding, brushing and brooming down. (excludi
ng base coat of white wash) etc. complete.

Providing and applying colour wash of approved colour and 0.00 0.00

shade in two coats to old surfaces which are to be recoloure
d
including scaffolding, brushing and brooming down. (excludi
ng base coat of white wash) etc. complete.

Providing and applying washable powder distemper of appr 0.00 0.00

oved
colour and shade to old & new surfaces in one coat including
scaffolding, preparing the surfaces (excluding the priming
coat)etc. complete.

Providing and applying washable powder distemper of appr 0.00 0.00

oved colour  and  shade  to  old  and  new  surfaces  in  two
coats including  scaffolding,  preparing  the  surfaces.
(excluding  the primer coat) etc .complete.

Providing & applying washable oil 0.00 0.00

bound distemper of approved
colour and shade to old & new surfaces in one coat including
scaffolding, preparing the surfaces. (excluding the primer
coat.)etc. complete.

Providing & applying washable oil 0.00 0.00

bound distemper of approved
colour and shade to old & new surfaces in two coats includin
g
scaffolding, preparing the surfaces. (excluding the primer co
at.) etc. complete.

Providing and applying plastic emulsion paint of 0.00 0.00

approved
quality, colour and shade to old & new surfaces in two coats
including scaffolding, preparing the surface. (excluding
the primer coat)etc. complete.

Providing and applying plastic emulsion paint of 0.00 0.00

approved
quality, colour and shade to old surface in three coats includi
ng
scaffolding, preparing the surface. (excluding primer coat) et
c. complete.
Providing  and  applying  plastic  emulsion  paint  of   0.00 0.00
approved quality,  colour  and  shade  to  new  surface  in
three  coats
including scaffolding, preparing the surface. (excluding prim
er coat) etc. complete.

Washing and cleaning of decorated wall surfaces with soap, 0.00 0.00

soda and water etc. complete.

Labour charges for applying two coats of alluminium paint fo 0.00 0.00

r flag
post including preparing the surface and primer coat etc.
complete.

Providing and applying putty to old plastered surfaces in two 0.00 0.00

coats to receive approved paint in all positions including all
materials,labour scaffolding and curing etc. complete.

Providing and applying putty to new plastered surfaces in tw 0.00 0.00

o
coats to receive approved paint in all positions including all
materials,labour scaffolding and curing etc. complete.

Providing and fixing Ghana teak wood planking 25 mm thick 0.00 0.00

for flooring plained on both sides, tongued and grooved
including scaffolding, if necessary, and one coat of primer et
c. complete.

Providing and fixing Ghana teak wood planking 50 mm thick 0.00 0.00

for flooring plained on both sides, tongued and grooved
including scaffolding, if necessary, and one coat of primer et
c. complete.

Providing and fixing Ghana teak wood joists and girders 0.00 0.00

in timber floors of single, double or framed type
including
scaffolding if necessary, and one coat of primer etc. complet
e.

Providing and fixing Jungle (hard) wood of approved species 0.00 0.00

joists and girders in timber floor of single, double or framed
type including scaffolding if necessary and one primer coat e
tc. complete.
Providing and fixing Ghana teak wood plank ceiling 20 mm 0.00 0.00
thick plain underside tongued and grooved including
iron
screws, scaffolding, if necessary, including one primer coat o
n under side and one coat of coal tar on upper side
etc. complete.

Providing and fixing Ghana teak wood framed collar beam / 0.00 0.00

king post / queen post truss, with all Iron work
including
scaffolding, if necessary, and one coat of primer etc. complet
e.

Providing and fixing in jungle wood framed collar beam / kin 0.00 0.00

g post / queen post truss, with all iron work including
scaffolding, if necessary and primer coat etc. complete.

Providing and fixing Ghana teak wood common rafters, purli 0.00 0.00

ns
and purlin cleats, hip rafters, jack rafters, ridges, wall plates,
post plates and posts for roofing etc. including scaffolding, if
necessary, all iron work and one coat of primer etc. complet
e.

Providing and fixing jungle wood common rafters, purlins an 0.00 0.00

d
purlin cleats, hip rafters, jack rafters, ridges, wall plates, post
plates & posts for roofing, etc. including scaffolding, if
necessary all iron work and one coat of primer etc. complete
.

Providing and fixing Ghana teak wood hand rail of 60 mm x 0.00 0.00

75
mm as per detailed drawings or as directed by the Engineer,
including french polishing, etc. complete. (Note : The work t
o be executed on preapproval of Superintending Engineer).

Providing and fixing country teak wood two way trellis work 0.00 0.00

with battens or laths 2.5 cm x 1.2 cm and 5 cm x 5
cm
openings including frame of 8 cm x 5 cm vertical and horizon
tal scantlings and coat of primer etc. complete.
Providing and fixing hard wood of approved species two way 0.00 0.00
trellis work with battens or laths 2.5 cm x 1.2 cm and 5 cm x
5 cm openings including frame of 8 cm x 5 cm vertical
and horizontal scantlings and coat of primer etc. complete.

Providing and fixing decorative teak plywood veneer lining 4 0.00 0.00

mm thick with backing of Ghana teak wood frame work of
battens 12 mm X 25 mm at 30 cm center to center fixed to
walls and pillars without skirting and cornice as per drawing
s
including necessary iron work and finishing the exposed wo
od work with french polish etc. complete.

Providing and fixing 20 mm thick superior veneer board pel 0.00 0.00

met
box 150 to 200 mm wide to doors or window frames includi
ng
20mm dia. Aluminium curtain rod with sockets and finishing
with french polishing (without top)etc. complete.

Providing and fixing 20 mm thick Laminated sheet board pel 0.00 0.00

met
box 150 to 200mm wide to doors or window frames includin
g
20 mm dia. Aluminium curtain rod with sockets and finishin
g with french polishing (without top) etc.complete.

Providing and fixing Ghana teak wood eaves boards 15 cm w 0.00 0.00

ide
and 25 mm thick plain decorative type including scaffolding
and painting with two coats etc. complete.

Providing and fixing seasoned and treated jungle wood 0.00 0.00

of
approved species eaves board 15 cm wide and 25 mm thick
plain decorative type including scaffolding and painting with
two coats etc. complete.

Providing and fixing Ghana Teak wood eaves plate of size 10 0.00 0.00

cm
wide and 20 mm thick including scaffolding and painting in
two coats etc. complete.
Providing and fixing country teak wood barge board 22 cm 0.00 0.00
wide and 20mm thick plain type including scaffolding
and painting in two coats etc. complete.

Providing and fixing seasoned and treated jungle wood 0.00 0.00

of
approved species barge board 22 cm wide and 20 mm thick
plain type including scaffolding and painting in two coats etc
. complete.

Providing and fixing shutter to wall cupboard made from 19 0.00 0.00

mm thick Teak particle board with approved coloured lamin
ated
face 1.5 mm thick bonded with phenol formaldehyde synthe
tic resin B.W.P. grade including lipping beading iron
oxidised fixtures and fastening and oil primer coat etc.
complete. (Excluding cupboard frame).

Providing and fixing Shutter to wall Cupboard consisting 0.00 0.00

of
Ghana Teak Wood styles and Rails 25 mm thick and 75 mm
wide with panel insert of 12 mm thick particle Board with o
ne
approved coloured Laminated Face on one side 1.5 mm thick
,
bonded with Phenol Formaldehyde Synthetic Resin including
Lipping Beading. Iron oxidised fixtures and fastening and oil
primer coat etc. complete. (Excluding cupboard frame).

Providing and fixing jungle wood ballies of approved species 0.00 0.00

85
mm average dia. for common rafters, purlins, ridges, hip and
valley rafters, jack rafters, wall plates, post plates, posts etc.
including all iron work scaffolding if necessary and oiling in o
ne coat etc. complete.

Providing and fixing 100 mm dia. Country teak wood ballies f 0.00 0.00

or
post truss of 6.00 m. span as per drawing or as directed by
Engineerin charge including all iron work, scaffolding if
necessary and oiling etc. complete.
Providing and applying Wax polishing to the old wood work 0.00 0.00
including knotting, preparing the surface, scaffolding etc.
complete as directed.

Providing and fixing Mangalore tiled roofing with class ' AA' 0.00 0.00

tiles
including securing the last course of tiles near the eaves wit
h
steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 2
5
mm horizontal teak wood battens and iron works and oiling
the battens etc. complete. (Excluding ridge and hip tiles).

Providing and fixing Mangalore tiled roofing with class 'AA' 0.00 0.00

tiles
including securing the last course of tiles near the eaves wit
h
steel flat 40 mm x 3 mm and 1.22 mm wire fixing country tea
k wood sloping battens of 25 x 12 mm teak wood horizontal
battens of 50mm x 25mm over the slopping battens, all iron
work and coal tarring the battens etc. complete
(Excluding ridge & hip tiles).

Providing and fixing Mangalore tile ridge and hip tiles of clas 0.00 0.00

s
'AA' including scaffolding if necessary, pointing with coloure
d cement mortar and curing etc. complete.

Providing and fixing corrugated galvanised iron sheets of 0.00 0.00

0.63mm thick (24 B.W.G.) for roofing without wind tiles
including fastening with galvanised iron screws & bolts, lead
& bitumen washers as per drawing etc. complete.
(Weight of 5.5 kg/sq.m.).

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 0.00 0.00

B.W.G.) over the ridge hip or valley to galvanized iron sheet
roofing including all fastening and bolt galvanised iron screw
s and bolts, lead and bitumen washers etc. complete.
(Weight of 6.8 kg/sq.m.).
Providing and fixing 6.00 mm thick ISI mark Asbestos Cemen 0.00 0.00
t Corrugated  sheet  roofing  including  galvanised  iron  'J'
or  'L' hook  bolts  galvanised  iron  band  bituminous  G.I.
washers, galvanised  iron  clamps,  bolts,  nuts  and
scaffolding  etc. complete.

Providing and fixing 6 mm thick ISI mark Asbestos 0.00 0.00

Cement ridge capping for roofing including galvanised
iron hooks,
bolts, galvanised iron and bituminous washers, galvanised ir
on clamps, bolts, nuts including scaffolding etc. complete.

Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain 0.00 0.00

galvanised iron sheets 120 cm wide with teak wood planking
20 mm thick including two coats of coal
tarring the upper surface of plank etc. complete.
(excluding painting to underside of plank).

Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain 0.00 0.00

galvanised iron sheets 90 cm wide with teak wood planking
20 mm thick including two coats of coal
tarring the upper surface of plank etc. complete.
(excluding painting to underside of plank).

Providing and fixing valley gutter of 24 B.W.G. (0.63 mm) thic 0.00 0.00

k
G.I. sheet 120 cm wide with 20 mm thick teak wood plankin
g underneath coal tarring etc. complete.

Providing and fixing glass tiles of Mangalore type at required 0.00 0.00

places in Mangalore tile roof including scaffolding if necessar
y etc. complete.

Providing and fixing Mangalore pattern cowl ventilator tiles i 0.00 0.00

n the  required  places  in  a  Mangalore  tiled  roof  including
scaffolding if necessary etc. complete.
Providing  and  fixing  false  ceiling  of  plain  asbestos   0.00 0.00
cement
sheets 4 mm thick with teak wood beadings 45 x 12 mm wit
h
frame work of teak wood battens of size 70 x 60 mm at 1.00
M
center to center including scaffolding, if necessary, all iron w
ork
and painting (visible surfaces) to A.C. sheet and beading in t
wo coats  etc.  complete.  (excluding  T.W.  runner  to  be
paid separately).

Providing and fixing frame work of anodised aluminium secti 0.00 0.00

ons
for suspended false ceiling consisting of aluminium T 50 mm
x
40 mm weighing 0.39 kg/m. at 60 cms c/c & fixed with ( 15 x
15 mm) flanges weighing 0.119 kg/m suspended on 6 mm di
a.
mild steel rod weighing 0.22 kg/m fixed on wall and beams
including rounding of the edges with aluminium T of 50 mm
x 40  mm  weighing  0.39  kg/m  etc.  including  all  labour
etc. complete.
Providing  and  fixing  frame  work  of  galvanised  iron  for 0.00 0.00
suspended false ceiling which includes galvanised iron perim
eter
channels of size 27 mm & 0.5 mm thick having one flange of
20 mm and another of 30 mm along with perimeter of the
ceiling, fixing in brick wall / partition with the help of rawal
plugs  and  screws,  suspending  galvenised  iron
intermediate
channels of size 45 mm and 0.9 mm thick with two flanges o
f 15 mm each from the soffit at 1200 mm centers with steel
galvanised iron hanger of width 25 mm x 0.5 mm fasteners,
ceiling section of 0.5 mm thickness having curved wedge of
51.5 mm and two flanges of 26 mm each with lips of 10.5 m
m
fixed to the intermediate channel with the help of connectin
g
clips and in direction perpendicular to the intermediate chan
nel at  450  mm  centers,  12.5  mm  dry  walls  screws  at
230  mm
centers; fixing screws mechanically either with screw driver
or drilling machine with suitable attachment etc. complete.

Providing and fixing false ceiling of teak wood particle board 0.00 0.00

half perforated sheet 12 mm thick including scaffolding,
if
necessary, all iron work and two coats of oil painting to boar
ds
and beading i.e. visible surface etc. complete. (excluding fra
me work and runners)

Providing and fixing false ceiling of 10 to 12 mm thick 0.00 0.00

decorative  boards  of  fibrous  plaster  of  paris  including
scaffolding if necessary all architectural work like mouldings,
cornices, coves, domes, cups as per detailed drawings and th
ree coats  of  spray  painting  to  boards  etc.  complete.
(excluding frame work, runners and mild steel suspenders).
Providing  and  fixing  false  ceiling  of  12mm  thick  tubular 0.00 0.00
Acoustic Armstrong/ Everest/ AMS boards of approved mak
e,
shape and sizes as per drawings including powder coated G.I
. wall angle of 20mm x 20mm size, G.I. grid runners of size
20mm  x  38mm  at  600mm  center  to  center  both  ways
and
suspended using G.I. 3mm wire including fixing using butter
fly clips  and  fasteners  including  transporting,  scaffolding
all necessary labour and machinery, finishing etc. complete.

Providing and fixing false ceiling of 15mm thick Acoustic 0.00 0.00

tubular Armstrong/ Everest/ AMS (0.60 x 0.60 m.) boards of
approved make, shape and sizes as per drawings
including
powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm
size, G.I. grid runners of size 15 mm x 38 mm at 600 mm
center to center both ways and suspended using G.I. 3 mm
wire including fixing using butterfly clips and fasteners
including
transporting, scaffolding all necessary labour and machinery,
finishing etc. complete.

Providing and fixing false ceiling of T.W. partical board half 0.00 0.00

perforated sheets 12 mm thick with frame work of M.S. angl
e
40 x 40 x 5 mm and T of size 40 x 40 x 6 mm at 60 cm center
to center including 12 mm dia. hangers, T.W. battens 50 x 25
mm and beading 25 x 15 mm thick scaffolding, if necessary,
all
iron work and two coats of painting to boards and beading i.
e. visible surface etc. complete.
Providing and fixing False ceiling of 12 mm thick Laminated 0.00 0.00
board with frame of M.S. angle 40 x 40 x 5 mm and Tee of siz
e 40 x 40 x 6mm at 60 cm c/c including 12 mm dia. hangers,
T.W. battens 50 x 25 mm and beading 25 x 15 mm thick
scaffolding if necessary, all Iron work etc. complete.

Providing and applying two coats of bitumen to roof on new 0.00 0.00

dungaree cloth one coat on each side etc. complete as direct
ed.

0.00 0.00
Providing and applying one coat of bitumen to roof (without
cloth) including scaffolding etc. complete as directed.

Removing and resetting Mangalore tiles from roof 0.00 0.00

including refixing loose battens etc. complete.
Removing the tiles, battens and dungry cloth purlins, rafters 0.00 0.00
and ridges etc. from roof, sorting out the serviceable
and
unserviceable materials and stacking the same as and where
directed in the compound, scaffolding etc. complete.

Removing G.I. or A.C. sheet roofing including purlins, princip 0.00 0.00

al rafters  etc.  including  sorting  serviceable  and
unserviceable materials,  stacking  the  same  as  and  where
directed  in  the
compound including scaffolding etc. complete.

Removing and lowering the roof truss carefully without 0.00 0.00

damaging the members and stacking as and where directed i
n the compound including scaffolding etc. complete.

Removing R.S. girders of any size and span lowering the sam 0.00 0.00

e and stacking neatly wherever directed in the
compound scaffolding etc. complete.

Providing fixing teak wood battens 50 mm x 25 mm for 0.00 0.00

Mangalore tile roof work with all iron work scaffolding
and oiling the battens etc. complete.

Providing fixing teak wood battens 25 mm x 12 mm for 0.00 0.00

Mangalore tile roof work with iron work scaffolding and oili
ng the battens etc. complete.
Providing and fixing sky light in R.C.C. roof including frame 0.00 0.00
made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glas
s
5 mm thick, Chicken mesh 24 gauge with all accessories and
required fixtures and fastening fitting including painting etc.
complete.

Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. 0.00 0.00

length for anchor rods with necessary threading nuts and bo
lts etc. complete.

Providing fixing Mangalore tile roofing with class AA tiles in 0.00 0.00

cement mortar 1:4 on sloping slab including necessary
scaffolding, curing, finishing, etc. complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( mi 0.00 0.00

n
150 gms/sq.mt. total on each side ) profiled sheets for roofin
g.
The feed material is manufactured out of nominal 0.45 mm
Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi strength steel
with min.550 MPa yield strength, metallic hot dip coated wit
h Aluminium Zinc  alloy  (55%  aluminium  43.4%  zinc  1.6%
silicon)  with  COLORBOND  (  R  )  steel  quality  super
durable
polyester paint coat ( with inorganic pigment). The paint shal
l
have a total coating thickness of nominal 35 um, comprising
of
nominal 25 um exterior coat on top surface and nominal 10
um
reverse coat on back surface. Profile sheet shall have nom. 9
501050 mm effective cover width and nominal 25
30 mm deep
ribs with subtle square fluting in the five pan at nominal 180
250 mm center to center. The end rib shall be designed for
anti capillary groove. & return leg. The feed material should
have  coil  manufacturers  product  details  marked  a
regular
interval. Including fasteners with min. fastened with min. 25
um Zinc Tin  alloy  coated,  Hex  head,  self drilling  screw  etc.
complete. (weight of profile 4.52 kg/sqm)
Providing  and  fixing  of  colour  coated  Zincaluminium(  R  ) 0.00 0.00
AZ150  (  min  150  gms/sq.mt.  total  on  each  side  )
profiled
sheets for roofing. The feed material is manufactured out of
nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT
), Hi
strength steel with min.550 MPa yield strength, metallic hot
dip coated withAluminium
Zinc alloy (55% aluminiumm 43.4%
zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The pa
int shall  have  a  total  coating  thickness  of  nominal  35
mm,
comprising of nominal 25mmexterior coat on top surface an
d
nominal 10 um reverse coat on back surface. Profile sheet sh
all have nom. 950
1050 mm effective cover width and nominal 2530 mm deep
ribs with sublet square fluting in the five pan at nominal
180 250  mmcenter to center.  The  end  rib  shall  be designed
for  anti capacity  groove.  &  return  leg.  The  feed
material should have coil manufacturers product details mar
ked
a regular interval. including fasteners with min. fastened wit
h min. 25 um Zinc Tin alloy coated, Hex head, self
drilling screw
etc. complete. (weight of profile 4.52 kg/sqm) 301 mm to 60
0 mm girth (Surface Width).
Providing and fixing of colour coated Zinc aluminium ( R ) 0.00 0.00
AZ150  (  min  150  gms/sq.mt.  total  on  each  side  )
profiled
sheets for roofing. The feed material is manufactured out of
nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT
), Hi
strength steel with min.550 MPa yield strength, metallic hot
dip coated with Aluminium
Zinc alloy (55% aluminiumm 43.4%
zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The pa
int shall  have  a  total  coating  thickness  of  nominal  35
um,
comprising of nominal 25um exterior coat on top surface an
d
nominal 10 um reverse coat on back surface. Profile sheet sh
all have nom. 950
1050 mm effective cover width and nominal 2530 mm deep
ribs with subtle square fluting in the five pan at nominal
180 250  mm  center to center.  The  end  rib  shall  be
designed  for  anti capacity  groove.  &  return  leg.  The  feed
material should have coil manufacturers product details mar
ked
a regular interval. including fasteners with min. fastened wit
h min. 25 um Zinc Tin alloy coated, Hex head, self
drilling screw
etc. complete. (weight of profile 4.52 kg/sqm) 601 mm to 90
0 mm girth (Surface Width).

Providing and fixing UPVC Roof made up of 3 layers roofing 0.00 0.00

material of thickness 2mm having width of 1130 mm and of
required Length having Tensile strength not less than
330 kg/cm2, including fastening with self drilling screw
having washers made of stainless steel etc. complete.

Providing and fixing PVC coloured Ridge tiles over UPVC roo 0.00 0.00

fing
where required having size 113cm x 41cm and height 9.5 cm
for  ridge  including  fastening  with  self  drilling  screw
having washers made of stainless steel etc. complete.
Providing and fixing 15 mm thick eco friendly densified edge 0.00 0.00
calcium silicate false ceiling (like aeroltie) of approved textur
e
spintone/cosmos/hexa or equivalent of size 595mm x 595m
m in
true horizontal level, suspended on interlocking metal grid o
f hot  dipped  galvanized  steel  sections  (galvanising  at
@12 gm/sq.m  including  both  sides)consisting  of  main  T
runner suitably  spaced  at  joints  to  get  required  length
and  size
24X38mm. made from 0.33mm thick(minimum ) sheet, spac
ed
1200mm center to center and cross T of size 24X28mm made
of  0.33mm  thick(minimum  )  sheet  to  be  interlocked  at
the
middle of the 1200x600 mm panel to form the grid of size
600x600mm resting on periphery walls/partitions on a peri
meter
wall angle precoated steel of size 24x24x3000 made of 0.4 m
m
thick (minimum) sheet with the help of all plugs at 450mm a
nd
laying 15 mm thick densified edges calcium silicate ceiling til
es of  approved  texture  (spintone/cosmos/hexa)  in  the
grid, including  light  fittings  ,  fixtures  ,  smoke  detectors
etc.,
wherever required. Main T runners suspended from ceiling
with
using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling
using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I.
adjustable  rods  with  galvanized  steel  levels  clips  of  size
85x30x0.8mm, spaced at 1200mm center to center along ma
in T  bottom  exposed  with  24mm  of  all  T sections  shall
be
prepainted with polyester baked paint, for all heights, as per
specifications,  drawings  etc.  complete.(currently  this  item
should be used only for VIP cabins)
Providing and fixing false ceiling with eco friendly light weight 0.00 0.00
calcium silicate tiles of spintone surface texture aerolite mak
e or equivalent  of  size  595mm  x  595mm  having  15mm
thick densified  micro  look  edge  and  100%  humidity
resistance incombustible  as  per  BS  46part  IV  and
thermal  conductivity
0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level
suspended grid of size 600x600mm made from hot dipped G
.I. steel  sections  ion  silhouette  profile,  rotary  stitched
double
webbed white with 6mm reveal profile (white/black), where
in,
main T runner of size 42mmx14mm between main tee 600m
m center
tocenter and secondary cross T of size 33x14x0.43mm
thick of length 600mm long spaced inter locked at middle of
the  first  crossed  T  in  each  panel  to  form  grid  of
1200mmx600mm resting on periphery wall Profile wall secti
on
19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling
for  services  like  diffusers  grills  including  cutting,  making
opening  for  light  fittings,  fixtures,  ,  smoke  detectors  etc.,
wherever required. Main T runners suspended from ceiling
with
using G.I. soffit cleats of size 25x35x1.6 mm of required lengt
h fixed  to  the  ceiling  with  6mm  dia  and  50mm  long
dash fastener,  4mm  dia  G.I.  adjustable  rods  with
powdercoated/good  quality  G.I.  level  adjustment  clips  of
35x35x0.8mm spaced @1200, center to
center along main T all
complete at all heights as per the specifications, drawings an
d as per the directions of Engineer in charge.
Providing  and  fixing  self  supporting  steel  roofing  system 0.00 0.00
(Proflex) for a Godown or alike made up of structural grade
steel sheet of 912 millimeter width ( tolerance +/  2 millimete
r ), moulded at site using mechanical press dies to the desire
d
curve and shape to form 605 millimeter wide interlocking pa
nels . The interlocking panels shall be pressed to close the se
am
forming water tight joints for a span of 15.30 meter having a
rch
rise as 3.06 meter, arch length 17.75 meter. The base materi
al
made up of imported galvalume steel complying to ASTM A7
92
having base metal thickness of 0.80 millimeter ( tolerace + /
0.02 millimeter ) with alloy coating AZ 150 and paint coating
of
regular modified polyster , top coat 25 micron and bottom c
oat
12 micron as per approved colour , including fixing hangers ,
clamps etc.as may be necessary of Proflex standard, includin
g
fixing sky light of 2 millimeter thick polycarbonate sheet of si
ze
2' x 7' and turbo ventilator of 24'' diameter to be installed at
every  30  feet  along  the  length  of  roof  including
finishing, testing and cleaning etc. complete.
Providing  and  fixing  self  supporting  steel  roofing  system 0.00 0.00
(Proflex) for a Godown or alike made up of structural grade
steel sheet of 912 millimeter width ( tolerance + /   2 millimet
er ), moulded at site using mechanical press dies to the desir
ed
curve and shape to form 605 millimeter wide interlocking pa
nels . The interlocking panels shall be pressed to close the se
am
forming water tight joints for a span of 21.30 meter having a
rch
rise as 4.26 meter, arch length 25.13 meter. The base materi
al
made up of imported galvalume steel complying to ASTM A7
92
having base metal thickness of 1.00 millimeter ( tolerace + /
0.02 millimeter ) with alloy coating AZ 150 and paint coating
of
regular modified polyster , top coat 25 micron and bottom c
oat
12 micron as per approved colour , including fixing hangers ,
clamps etc.as may be necessary of Proflex standard, includin
g
fixing sky light of 2 millimeter thick polycarbonate sheet of si
ze
2' x 14' and turbo ventilator of 24'' diameter to be installed a
t every 30 feet along the length of roof including finishing ,
testing and cleaning etc. complete.
Providing  and  fixing  self  supporting  steel  roofing  system 0.00 0.00
(Proflex) for a Godown or alike made up of structural grade
steel sheet of 912 millimeter width ( tolerance + /   2 millimet
er ), moulded at site using mechanical press dies to the desir
ed
curve and shape to form 605 millimeter wide interlocking pa
nels . The interlocking panels shall be pressed to close the se
am
forming water tight joints for a span of 25.00 meter having a
rch
rise as 5.00 meter, arch length 29.00 meter The base materia
l
made up of imported galvalume steel complying to ASTM A7
92
having base metal thickness of 1.20 millimeter ( tolerace + /
0.02 millimeter ) with alloy coating AZ 150 and paint coating
of
regular modified polyster , top coat 25 micron and bottom c
oat
12 micron as per approved colour , including fixing hangers ,
clamps etc.as may be necessary of Proflex standard, includin
g
fixing sky light of 2 millimeter thick polycarbonate sheet of si
ze
2' x 14' and turbo ventilator of 24'' diameter to be installed a
t every 30 feet along the length of roof including finishing ,
testing and cleaning etc. complete.
Providing  and  fixing  self  supporting  steel  roofing  system 0.00 0.00
(Proflex) for a Godown or alike made up of structural grade
steel sheet of 912 millimeter width ( tolerance + /   2 millimet
er ), moulded at site using mechanical press dies to the desir
ed
curve and shape to form 605 millimeter wide interlocking pa
nels . The interlocking panels shall be pressed to close the se
am
forming water tight joints for a span of 28.75 meter having a
rch
rise as 5.75 meter, arch length 33.92 meter. The base materi
al
made up of imported galvalume steel complying to ASTM A7
92
having base metal thickness of 1.40 millimeter ( tolerace + /
0.02 millimeter ) with alloy coating AZ 150 and paint coating
of
regular modified polyster , top coat 25 micron and bottom c
oat
12 micron as perapproved colour , including fixing hangers ,
clamps etc.as may be necessary of Proflex standard, includin
g
fixing sky light of 2 millimeter thick polycarbonate sheet of si
ze
2' x 14' and turbo ventilator of 24'' diameter to be installed a
t every 30 feet along the length of roof including finishing ,
testing and cleaning etc. complete.
Providing  &  Fixing  of  Armstrong  or  equivalent  Mineral   0.00 0.00
Fibre Acoustical  Suspended  Ceiling  System  with  ultima
(Bevelled Tegular)  Edge  Tiles  With  Armstrong  or
equivalent  15mm
Exposed GRID. The tiles should have Humidity Resistance (R
H)
of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivit
y
k = 0.052   0.057 w/m K, Colour White, Fire Performance UK
Class 0 / Class 1 (BS 476 pt   6 &7) in module size of 600 x
600 x 20mm , suitable for Green Building application, with
Recycled content of 32%. The tile shall be laid on precoated
G.I.channel on XL2 Clip having a web height of 32 mm with 1
5 mm  wide  T     section  flanges  colour  white  having  rotary
stitching on all T sections i.e. the Main Runner, 1200 mm &
600 mm Cross Tees with a web height of 32 mm and a load
carrying capacity of 7.7 Kgs/M2 & minimum pull out strengt
h of
100 Kgs.. The T Sections have a Galvanizing of 90 grams per
M2  and  need  to  be  installed  with  Suspension  system  of
Armstrong or equivalent make. . The Tile & Grid system used
together should carry a 10 year warranty. products approved
as per GRIHA and BS 476 etc. complete.
Providing  &  Fixing  of  Armstrong  or  equivalent  Mineral   0.00 0.00
Fibre Suspended  Ceiling  System  with  Bioguard  (Bevelled
Tegular)
EDGE TILES WITH ARMSTRONG or Equivalent 15mm Exposed
GRID. The tiles should have Humidity Resistance (RH) of 99%
,
Light Reflectance 90%, Thermal Conductivity k = 0.052   0.057
w/m K, Colour White, Fire Performance UK Class 0/Class 1 (B
S
476 Part 6 & 7), in module size of 600x600 x 16mm with Anti
Microbial coating on the face of the tile, suitable for Green
Building application, with Recycled content of 34%. The tile
shall be laid on precoated G.I. channel on XL2 Clip having a
web height of 32 mm 32 with 15 mm wide T   section flanges
colour white having rotary stitching on all T sections i.e. the
Main Runner & 1200 mm Cross Tees with a web height of 32
mm and a load carrying capacity of 7.7 Kgs/M2 & pull out
strength of 100Kgs. . The T Sections have a Galvanizing of 90
grams per M2 and need to be installed with Suspension syst
em
of Armstrong or equivalent make. The Tile & Grid system use
d
together should carry a 10 year warranty. products approved
at GRIHA and BS 476 etc. complete.
Providing  &  Fixing  of  Armstrong  or  Equivalent  Soft  Fibre 0.00 0.00
Acoustical  Suspended  Ceiling  System  with  Optra
(Bevelled Tegular)  Edge  Tiles  With  Armstrong  or
equivalent  15mm
Exposed Grid. The tiles should have Humidity Resistance (RH
) of 95%, NRC 0.9   1.0, Light Reflectance ?85%, Colour White,
Fire Performance UK Class 0 / Class 1 (BS 476 pt   6 &7) in
module size of 600 x 600 x 15mm , suitable for Green Buildin
g
application, with Recycled content of 66% GW & 74% RW. Th
e
tile shall be laid on precoated G.I channel 32 with 15 mm wi
de
T   section flanges colour white having rotary stitching on all
T
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tee
s
with a web height of 32 mm and a load carrying capacity of
7
Kgs/M2 with a minimum pull out strength of 100 kgs. The T
Sections have a Galvanizing of 90 grams per M2 and need to
be
installed with Suspension system The Tile & Grid system use
d
together should carry a 10 year warranty. products approved
as per GRIHA and BS 476 etc. complete.
Providing & Fixing of Armstrong OR equivalent GI Lay in Plai 0.00 0.00
n metal  ceiling  consisting  of  600x600mm  Lay  in  tiles  of
pre
coated galvanized steel in 0.5 mm thickness in Global white
color tile to be laid on Armstrong or equivalent grid systems
with 15mm wide T   section flanges color white having rotary
stitching  on  the  Main  Runner,  1200  mm  &  600  mm
Cross Tees.Providing  &  Fixing  of  GI  Lay  in  Plain  metal
ceiling
consisting of 600x600mm Lay in tiles of pre coated galvanize
d
steel in 0.5 mm thickness in Global white color tile to be laid
on
grid systems with 15mm wide T   section flanges color white
having rotary stitching on the Main Runner, 1200 mm & 600
mm Cross Tees.products approved as per GRIHA and BS 476
etc. complete.
Providing & Fixing of Armstrong OR equivalent Mineral Fibre 0.00 0.00
Acoustical  Suspended  Ceiling  System  with  Dune  (Bevelled
Tegular)  Edge  Tiles  With  Armstrong  or  equivalent  15mm
Exposed Grid. The tiles should have Humidity Resistance (RH
)
of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivit
y
k = 0.052   0.057 w/m K, Colour White, Fire Performance UK
Class 0 / Class 1 (BS 476 pt   6 &7) in module size of 600 x
600 x 16mm , with Recycled content of 35 %. The tile shall b
e
laid on precoated G.I.channel height 32 with 15 mm wide T s
ection flanges colour white having rotary stitching and XL2
CLIP on all T sections i.e. the Main Runner, 1200 mm & 600
mm Cross Tees with a web height of 32mm and a load carryi
ng
capacity of 7.57 Kgs/M2 & pull out stength of minimum 100
Kgs.. The T Sections have a Galvanizing of 90 grams per M2
and need to be installed with Suspension system of Armstro
ng OR  equivalent  make.  The  Tile  &  Grid  system  used
together
should carry a 10 year warranty.approved as per GRIHA and
BS 476 etc. complete.
Providing & Fixing of Armstrong OR equivalent Mineral Fibre 0.00 0.00
Acoustical  Suspended  Ceiling  System  with  Fine  Fissured
(Bevelled  Tegular)  Edge  Tiles  With  Armstrong  or
equivalent
15mm Exposed Grid. The tiles should have Humidity Resista
nce (RH)  of  99%,NRC  0.6,  Light  Reflectance  85%,  Thermal
Conductivity  k  =  0.052     0.057  w/m  K,  Colour  White,
Fire
Performance UK Class 0 / Class 1 (BS 476 pt   6 &7) in module
size of 600 x 600 x 16mm , with Recycled content of 31 %.
The tile shall be laid on precoated G.I channel height of 32 w
ith 15 mm wide T   section flanges colour white having rotary
stitching and XL2 CLIP on all T sections i.e. the Main Runner,
1200 mm & 600 mm Cross Tees with a web height of 32mm
and a load carrying capacity of 7.57 Kgs/M2 & pull out steng
th
of minimum 100 Kgs.. The T Sections have a Galvanizing of 9
0
grams per M2 and need to be installed with Suspension syst
em
of Armstrong OR equivalent make. The Tile & Grid system us
ed
together should carry a 10 year warranty. product approved i
n GRIHA and BS 476 etc. complete.

Providing and fixing frame with / without ventilator of size a 0.00 0.00

s
specified with Country cut teak wood for doors and window
s
including chamfering, rounding, rebating, iron holdfast of siz
e 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing frame with / without ventilator of size a 0.00 0.00

s
specified with Country non teak wood for doors and window
s
including chamfering, rounding, rebating, iron holdfast of siz
e 300mm x 40mm x 5mm with oil painting, etc. complete.
Providing and fixing the Country cut teak wood second class 0.00 0.00
fully glazed openable fanlight rectangular in shape as
per
detailed drawing excluding the frame,stainless steel fixtures
and
fastenings and finishing the wood work with 3 coats of oil
painting.

Providing and fixing Country cut teak wood double or single 0.00 0.00

leaf second class fully panelled door shutter with 35mm thic
k
style and rail with 25 mm thick panels with openable fan lig
ht
as per detailed drawings. Excluding the door frame 60mm x
100mm stainless steel fixtures and fastening and finishing th
e wood work with oil painting 3 coats.

Providing and fixing Country cut teak wood single leaf panell 0.00 0.00

ed
door shutter without fanlight and 25mm thick as per drawin
g consisting of Ghana T.W. top rail size 100mm x 25mm and
bottom lock rail 200mm x 25mm insert pannel 12 mm thick
commercial  ply  faced  T.W.  particle  board  with  phenol
formaldehyde synthetic resin (Generally confirming to ISI 30
97)
excluding frame, including stainless steel fixture and fastenin
g and  T.W.  beading  to  junctions  of  panelled  inserts  and
as
instructed by the Engineer in charge including 3 coats of oil
painting etc. complete.
Providing and fixing single leaf panelled door shutter withou 0.00 0.00
t
fanlight and shutter 35 mm thick as per drawing consisting o
f
Ghana T.W. top rail size 100mm x 35 mm and bottom and loc
k
rail 200mm x 35mm insert panel 12 mm thick commercial pl
y
faced T.W. particle board with phenol formaldehyde syntheti
c resin  (Generally  confirming  to  ISI  3097)  excluding
frame,
including stainless steel fixtures fastening and T.W. beading a
t
junction of panels inserts and as instructed by the Engineer i
n charge including 3 coats of oil painting etc. complete.

Providing and fixing single or double leaf panelled door shu 0.00 0.00

tter
excluding frame with glazed openable fanlight shutter 35 m
m
thick as per detailed drawing consistingpanelled vertical styl
es
100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm
and panels 12 mm thick both side commercial ply faced parti
cle
board including stainless steel fixtures and fastening and T.W
.
beading at junctions of panel inserts and as instructed by th
e Engineer in charge including 3 coats of oil painting
etc. complete.

Providing and fixing Country cut teak wood double or single 0.00 0.00

leaf panelled shutters, 35 mm thick style and rail and 25 mm
thick panels without ventilator as per detailed drawing
excluding the door frame, stainless steel fixtures and fasteni
ng
and finishing the wood work with oil painting 3 coats compl
ete
Providing and fixing solid core flush door shutter in single le 0.00 0.00
af
32 mm thick decorative type of exterior grade as per detaile
d
drawings approved face veneers 3 mm thick on both faces or
as
directed, all necessary beads, mouldings and lipping, wroug
ht
iron hold fasts, chromium plated fixtures and fastenings, wit
h
brass mortise lock, chromium plated handles on both sides,
and finishing with French Polish etc. complete.

Providing and fixing solid core flush door shutter commercial 0.00 0.00

in
single leaf 32 mm thick without ventilator commercial type
of
exterior grade as per detailed drawings with wrought iron h
old
fast, stainless steel fixtures and fastenings and handles on b
oth sides and finishing with oil painting 3 coats complete.

Providing and fixing solid core flush door commercial type o 0.00 0.00

n
single leaf 16 mm thick Bison Panel cement bonded particle
Board including Teak wood lipping beading on all four edges
without  ventilator  commercial  type  of  exterior  grade  as
per detailed  drawings  with  wrought  iron  hold
fast,stainless  steel
fixtures and fastenings and handles on both sides and finishi
ng with oil painting three coats complete.

Providing and fixing Country cut teak wood single leaf door 0.00 0.00

shutter with teak wood style and rail of 25 mm thick includi
ng
fixing 50 mm x 25 mm size welded mesh of 10 gauge as per
detailed drawing or as directed with stainless steel fixture an
d
fastening finishing with 3 coats of oil painting etc. complete.
Providing and fixing factory made panelled door shutter 0.00 0.00
in
single leaf 35 mm thick style and rail without ventilator with
CCTW panels 12 mm thick including wrought iron hold fast a
nd
stainless steel fixtures with oil painting 3 coats etc. complete
.

Providing and fixing Country cut teak wood single leaf panell 0.00 0.00

ed door shutters 35 mm thick style and rail and 19 mm
thick
Ghana T.W. panels as per detailed drawing including wrough
t
iron hold fast stainless steel fixtures and fastening and three
coats of oil painting etc. complete.

Providing and fixing fully glazed double leaf window shutter 0.00 0.00

with openable fanlight including Country cut teak wood 25
mm
thick style and rails with plain / obscured glass panels as per
drawing or as directed by the Engineer in charge with stainle
ss
steel fixtures and fastening and finishing the wood work wit
h oil painting three coats etc. complete.

Providing and fixing Country cut teak wood window 0.00 0.00

with
double leaf half glazed and half panelled shutter with ventila
tor
including wrought iron hold fast, stainless steel fixtures and
fastenings and finishing the wood work with oil
painting 3 coats etc. complete.

Providing and fixing Country cut teak wood windows 0.00 0.00

with
double leaf 25 mm thick planked shutters without ventilator
s as per  detailed  drawings  including  stainless  steel
fixtures  and fastenings  and  finishing  the  wood  work
with  oil  painting  3 coats etc. complete

Providing and fixing Country cut teak wood windows / 0.00 0.00

ventilators  with  double  leaf  panelled  shutters  25  mm
thick
without ventilators as per detailed drawing including stainle
ss
steel fixtures and fastenings and finishing the wood work wi
th oil painting 3 coats etc. complete.
Providing  and  fixing  steel  window  of  various  sizes  as   0.00 0.00
per detailed  drawing  without  hot  dip  zinc  coating,
without
ventilators, including fabricating / glazing with plain / obscur
ed
glass panels of approved type and quality, iron oxidised fixtu
res and fastenings, oil painting two coats complete.

Providing and fixing steel window of various sizes as 0.00 0.00

per detailed drawing without hot dip zinc coating,
without
ventilators, including fabricating / glazing with plain / obscur
ed
glass panels of approved type and quality, iron oxidised fixtu
res
and fastenings, finishing with oil painting two coats complet
e (with guard bars 12 mm square at 10 cm c/c.)

Providing and fixing steel window C.R.C. sheet as per I.S. 151 0.00 0.00

3 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of
24
gauge single leaf joined by fusion welding at appropriate poi
nts
with vertical grooves of 15 mm wide and 15 mm deep at a
distance of 45 mm. The first and last rib should be 60 mm a
way
from vertical edge of the shutter. the shutter shall be welded
,
with angle to from the periphery of the shutter. At the cente
r of
the frame there shall be angle welded to bifurcate the frame
into segments with two leaf shutter square 12 mm square gu
ard bars at 120 mm center with all accessories
Providing and fixing in position factory made box type steel 0.00 0.00
window with glazed fanlight including steel windows of cold
rolled section of 105mm x 60mm x 1.25mm thick frame secti
on filled with cement concrete (1:2:4) and metal
pressed steel
shutters of 20 gauge (1mm) as per detailed drawing and desi
gn
or as directed including providing horizontal mild steel 12m
m square bars at 10cm center to center, required F
7B section, section 7
6, section 20mm x 5mm mild steel flat for shutter and
F4B section for frame, 3mm thick glass of approved quality f
or
fanlight necessary fixtures and fastening etc. complete finish
ing with one coat of anti corrosive paint etc.complete

Providing and fixing in position factory made box type fully 0.00 0.00

glazed window consisting of cold rolled section of 105mm x
60mm  x  1.25mm  thick  frame  section  filled  with  cement
concrete (1:2:4) and steel section F4B as per detailed drawin
g and design including mild steel 12mm square bars at 10cm
center to center, required F 7B section, section T 6, section for
shutter  frame  (Louvered  clips  in  case  of  Louvered
window
portion) and 3mm thick glass of approved quality of necessa
ry fixtures and fastening, finishing with one coat of anti
corrosive paint etc. complete .
Providing and fixing rolling shutter fabricated from steel lath 0.00 0.00
s of minimum  thickness  0.9  mm  with  lock  plate  of  3.15
mm
thickness reinforced with 35 x 35 x 5 mm angle section fitted
with sliding bolts and handles for both sides, deep M.S. chan
nel
section of depth and thickness not less than 65 mm and 3.15
mm respectively with hold fast arrangements, M.S. Bracket p
late
300 x 300 x 3.15 mm minimum size and shape with square b
ar,
suspension shaft of minimum 32 mm diameter, hood cover o
f
M.S. sheet not less than 0.9 mm thickness and of any size at
top  and  safety  devices  including  mechanical  gear
operation
arrangement consisting of worm gear wheels and worms of
high
grade cast iron or mild steel and one coat of red lead primer
etc. complete. (I.S. 6248 1979) (Without mechanical gear)
Providing and fixing rolling shutter fabricated from steel lath 0.00 0.00
s of minimum  thickness  0.9  mm  with  lock  plate  of  3.15
mm
thickness reinforced with 35 x 35 x 5 mm angle section fitted
with sliding bolts and handles for both sides, deep M.S. chan
nel
section of depth and thickness not less than 65 mm and 3.15
mm respectively with hold fast arrangements, M.S. Bracket p
late
300 x 300 x 3.15 mm minimum size and shape with square b
ar,
suspension shaft of minimum 32 mm diameter, hood cover o
f
M.S. sheet not less than 0.9 mm thickness and of any size at
top  and  safety  devices  including  mechanical  gear
operation
arrangement consisting of worm gear wheels and worms of
high
grade cast iron or mild steel and one coat of red lead primer
etc. complete. (I.S. 6248 1979) (With mechanical gear)

Providing and fixing collapsible steel gate in one / two leaves 0.00 0.00

with hot rolled vertical channels of 18 x 9 x 3 mm minimum
size, crossings of M.S. flats of size 18 x 5 mm T or E section fo
r
runner of minimum 40 x 6 mm size for flange, M.S. flat for to
p runner  of  minimum  size  40  x  12  mm  with  roller
wheels
confirming to grade F.G. 150 fitted with snap headed rivets o
f
minimum size 6 mm max. spacing of vertical channels be 10
0
mm enclosed gate position and clear space of 150 mm betw
een
two sets of crossings with hold fasts, stoppers, spaces, handl
es, locking  arrangement  and  one  coat  of  red  lead
primer  &  oil painting etc. complete. (I.S. 10521 1983).
Providing and fixing partition of welded mesh of 3 mm dia. 0.00 0.00
wires 50 mm x 25 mm size mesh including integrated non te
ak
seasoned wood frame 80 x 50 mm of vertical and horizontal
scantling and finishing with oil painting 3 coats etc. complete

0.00 0.00
Providing and fixing sheet glass of 24 oz. for all size including
putty etc. complete

Providing and fixing steel ventilator fully glazed partly fixed 0.00 0.00

as per  detailed  drawing  without  hot  dip  zinc  coating
including fabricating  glazing  with  plain  /  obscured  glass
panes  and approved  type  and  quality  and  iron  oxidized
fixtures  and fastening oil paint 2 coats etc. complete.

Providing and fixing steel ventilator fully glazed partly fixed 0.00 0.00

as per  detailed  drawing  with  hot  dip  zinc  coating
including fabricating  glazing  with  plain  /  obscured  glass
pans  and
approved type quality and iron oxidized fixtures and fastenin
g with guard square bars 12 mm 10 cm c/c and oil painting 2
coats etc. complete.

Providing and fixing M.S. grill door 24 kg/sqm of various size 0.00 0.00

as
per detailed drawings without hot dip coating, iron fixtures
and fastenings and 3 coats of oil painting etc

Providing and fixing CCTW beading of size 40 mm x 20 mm t 0.00 0.00

o
the door frame of size 60 mm x 100 mm / 110 mm including
chamfering finishing with 3 coats of oil painting etc. complet
e
Providing and fixing steel frame of angle 50 x 50 x 6 mm size 0.00 0.00
for window with 16 mm with mild steel bars horizontally at
10
cm c/c for ventilator portion and at 15 cm c/c for remaining
portion with M.S. flat of size 40 x 6 mm vertical at center
including iron hold fast boxes for fixing 40 x 6 mm vertical at
center including iron hold fast boxes for fixing 40 x 6 mm
vertical at center including iron hold fast boxes for
fixing
shutters including welding finishing painting etc. complete.

Providing and fixing steel frame of angle 40 x 40 x 5 mm size 0.00 0.00

for windows with 16 mm dia. mild steel bars horizontally at
10 cm c/c for ventilator portion and 15 cm c/c for
remaining
portion with M.S. flat of size 40 x 6 mm vertical at center
including iron hold fast boxes for fixing 40 x 6 mm vertical at
center including iron hold fast boxes for fixing shutters
including welding finishing painting etc. complete.

Providing and fixing steel frame door of angle 50 x 50 x 6 m 0.00 0.00

m
with mild steel bars 16 mm dia. horizontally at 10mm c/c for
ventilator portion including iron hold fast boxes for
fixing
shutters including welding, finishing, painting etc. complete.

Providing and fixing steel frame door of angle 40 x 40 x 5 m 0.00 0.00

m
with 16 mm dia. mild steel bars horizontally at 10cm c/c for
ventilator portion including iron hold fast for the fixing shutt
ers including welding, painting, finishing etc. complete.
Providing  and  fixing  in  position.  (as  per  I.S.1868  /  1982) 0.00 0.00
Aluminium sliding window of two tracks with rectangular pi
pe
having overall dimension 63.50 x 38.10 x 1.02 mm at weight
0.547 kg/Rmt. and window frame bottom track section 61.8
5 x
31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Th
e shutter should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 m
m at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. As per detailed drawings and a
s
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylo
n
casting and self locking catch fitted in vertical section of shu
tter
including 5 mm thick plain glass with all required screws and
nuts etc, complete. With colour Anodising with box.
Providing  and  fixing  in  position.  (as  per  I.S.1868  /  1982) 0.00 0.00
Aluminium sliding window of two tracks with rectangular pi
pe
having overall dimension 63.50 x 38.10 x 1.02 mm at weight
0.547 kg/Rmt. and window frame bottom track section 61.8
5 x
31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Th
e shutter should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 m
m at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. As per detailed drawings and a
s
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylo
n
casting and self locking catch fitted in vertical section of shu
tter
including 5 mm thick plain glass with all required screws and
nuts etc, complete. With colour Anodising without box
Providing  and  fixing  in  position.  (as  per  I.S.1868  /  1982) 0.00 0.00
Aluminium sliding window of two tracks with rectangular pi
pe
having overall dimension 63.50 x 38.10 x 1.02 mm at weight
0.547 kg/Rmt. and window frame bottom track section 61.8
5 x
31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Th
e shutter should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 m
m at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. As per detailed drawings and a
s
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylo
n
casting and self locking catch fitted in vertical section of shu
tter
including 5 mm thick plain glass with all required screws and
nuts etc, complete. With powder coating with box
Providing  and  fixing  in  position.  (as  per  I.S.1868  /  1982) 0.00 0.00
Aluminium sliding window of two tracks with rectangular pi
pe having overall dimension ?
63.50 x 38.10 x 1.02 mm at weight
0.547 kg/Rmt. and window frame bottom track section 61.8
5 x
31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Th
e shutter should be of bearing bottom 40 x 18 x 1.25 mm at
weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 m
m at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25
mm at weight 0.417 kg/Rmt. As per detailed drawings and a
s
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylo
n
casting and self locking catch fitted in vertical section of shu
tter
including 5 mm thick plain glass with all required screws and
nuts etc, complete. With powder coating without box
Providing  and  fixing  in  position  (as  per  1868  /  1982) 0.00 0.00
Alluminium sliding window of three tracks with rectangular
pipe
95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window
frame bottom track section 92 x 31.75 x 1.30 mm at weight
1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30
mm at weight 0.933 kg/Rmt. The shutter should be of bearin
g bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt.
and handle and top section 40 x 18 x 1.25 mm at weight o.4
17
kg/Rmt. As per detailed drawings and as directed by Enginee
rin charge  with  all  necessary  Aluminium  sections  fixtures
and fastenings  such  as  roller  bearing  in  nylon  casting
and  self
locking catch fitted in vertical section of shutter including 5
mm thick  plain  glass  and  aluminium  mosquito  net
shutter  with stainless  steel  jail  with  all  required  screws
and  nuts  etc, complete. With colour Anodising with box
Providing  and  fixing  in  position  (as  per  1868  /  1982) 0.00 0.00
Aluminium sliding window of three tracks with rectangular p
ipe
95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window
frame bottom track section 92 x 31.75 x 1.30 mm at weight
1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30
mm at weight 0.933 kg/Rmt. The shutter should be of bearin
g bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt.
and handle and top section 40 x 18 x 1.25 mm at weight o.4
17
kg/Rmt. As per detailed drawings and as directed by Enginee
rin charge  with  all  necessary  Aluminium  sections  fixtures
and fastenings  such  as  roller  bearing  in  nylon  casting
and  self
locking catch fitted in vertical section of shutter including 5
mm thick  plain  glass  and  aluminium  mosquito  net
shutter  with stainless  steel  jail  with  all  required  screws
and  nuts  etc, complete. With colour Anodising without box
Providing  and  fixing  in  position  (as  per  1868  /  1982) 0.00 0.00
Aluminium sliding window of three tracks with rectangular p
ipe
95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window
frame bottom track section 92 x 31.75 x 1.30 mm at weight
1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30
mm at weight 0.933 kg/Rmt. The shutter should be of bearin
g bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt.
and handle and top section 40 x 18 x 1.25 mm at weight o.4
17
kg/Rmt. As per detailed drawings and as directed by Enginee
rin charge  with  all  necessary  Aluminium  sections  fixtures
and fastenings  such  as  roller  bearing  in  nylon  casting
and  self
locking catch fitted in vertical section of shutter including 5
mm thick  plain  glass  and  aluminium  mosquito  net
shutter  with stainless  steel  jail  with  all  required  screws
and  nuts  etc, complete. With powder coating with box
Providing  and  fixing  in  position  (as  per  1868  /  1982) 0.00 0.00
Aluminium sliding window of three tracks with rectangular p
ipe
95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window
frame bottom track section 92 x 31.75 x 1.30 mm at weight
1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30
mm at weight 0.933 kg/Rmt. The shutter should be of bearin
g bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt.
and handle and top section 40 x 18 x 1.25 mm at weight o.4
17
kg/Rmt. As per detailed drawings and as directed by Enginee
rin charge  with  all  necessary  Aluminium  sections  fixtures
and fastenings  such  as  roller  bearing  in  nylon  casting
and  self
locking catch fitted in vertical section of shutter including 5
mm thick  plain  glass  and  aluminium  mosquito  net
shutter  with stainless  steel  jail  with  all  required  screws
and  nuts  etc, complete. With powder coating without box
Supplying and fixing in position Aluminium extruded section 0.00 0.00
Four track sliding windows upto 1.2 metre height, outer fra
me
made from section of over all size 80 mm x 45 mm, bottom
section with or without drain section, track weighing 0.90 kg
per metre and top and side section weighing 0.838 kg per
running metre with shutter or sections made of 19 mm x 40
mm size having average weight of 0.6 kg per running metre(
or
as required size) with change in proportionate weight,with 5
.00
mm selected quality plain sheet glass fixed with new neopre
ne gasket  shutters  to  be  provided  with  nylon  encased
stainless rollers,  necessary  locks  and  handles  complete.
(As  per
Architect's drawing no.Job No. T  MISC/5000 Drg.No.22 date
d 3.2.1992).

Providing & fixing of approved make PVC Louvered 0.00 0.00

/fixed
Glazed window / ventilator frame fabricated out of rigid PVC
hollow section of size 48mm x 40 mm with concealed solid
polymeric reinforcement shall have mitre cut and fixed with
the
help of 100mm long full threaded metal screws in PVC roll
plugs inserted in wall as hold fast. The snap fit glazing bid of
size 19mm x 19.5mm shall be fixed alongwith outer frame fo
r fixing  the  5mm  thick  clear  vision  glass  panel  or
louvered. Necessary  hardware  such  as  rubber  gasket,
louvered  glass
holding clip shall be fixied at required junction etc. complete
.
Providing and Fixing 30 MM thick '' FACTORY MADE BOTH SI 0.00 0.00
DE PRELAMINATED  SOLID  PANEL  PVC  DOOR  SHUTTER
manufactured by M/S RAJSHRI equivalent consisting of fram
e
made out of M.S tubes of 19 guage thickness and, size 19 x 1
9
mm for styles and 15 x15 mm for the top and bottom rails,M
.S
frame shall have a coat of metel primer of approved make a
nd
manufacture .M.S frame shall be covered with heat mouled
PVC
' C ' channel made from 5 mm (+/  0.25) thick prelaminated
sheet of density 600 kg/cbm ,of size 30mm thickness 70mm
width out of which 50mm shall be flat and 20mm shall be
tapered in 45? angle on either side forming stiles ; and 5 mm
thick ,95 mm wide PVC sheet out of which 75 mm shall be fa
lt
and 20 mm shall be tapered in 45? on the inner side to form
top and bottom rail and 115 mm wide PVC sheet out of whic
h
75 mm shall be falt and 20 mm shall be tapered on both side
s to form lock rail.Top,bottom and lock rail shall be provided
either side of the panel. An additional 5 mm (+/  0.25) thick
PVC strip of 20 mm width is to be stuck on the bottom side o
f the ' c ' channel prelaminated paneling of 5 mm (+/  0.25)
thick  PVC  sheet  to  be  fitted  inside  the  M.S.  frame
welded/
sealed to the styles and rails with 5 mm (+/  0.25) x 30 mm
PVC  sheet  beading  on  either  side  and  joined  together
with solvent  cement  adhesive  etc  ,10  mm  thickness  (5
mm
(+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert f
or
the rail and bottom rail. Door to be fixed to frames with 3 no
s
M.S.powder coated but hinges of size 100 mm x 25MM x 2m
m
Providing and fixing Rajshri brand or equivalent factory mad 0.00 0.00
e 34 mm thick moulded door shutter consisting of solid core
single leaf flush door of 30 mm thickness lipped with 15 mm
( 5mm x 3) thick x 30 mm width on one style and top rail an
d 10
mm (5mm x 2) thick x 30 mm width on other style and botto
m
rails. The inner panels laminated with 2 mm thick termite pr
oof,
water proof and fire resistant moulded PVC sheet with 2,4,6
design in different plain and /or prelim colours on one side a
fter
routing the moulded design on flush doors and 2 mm plain a
nd
/or pre lam PVC on other side using rubber adhesive on flus
h
door and solvent cement adhesive on the PVC lipping etc. as
per  direction  of  Engineer  in  charge  and  manufacturers
specification and drawing etc. complete.

Providing and fixing cold rolled steel hollow door frame 105 0.00 0.00

mm
x 60mm for anysizes including hold fast hinges, tie members
with red oxide and gray paint etc. complete as per I.S.I.
specifications and code of practice prescribed including
anticorrosive treatment as directed by the engineer.

Providing and fixing in position aluminium openable windo 0.00 0.00

w of
any size as per detailed drawing and as directed by Engineer
in
charge with all necessary aluminum sections including neces
sary
fixtures and fastening with 5 mm thick clear float glass etc.
complete. a) Without powder coating Note   While arriving at
the rate of item of item weight at 6.90 kg/Sqm is considered.
Providing and fixing in position aluminium openable windo 0.00 0.00
w of
any size as per detailed drawing and as directed by Engineer
incharge  with  all  necessary  alluminium  sections  including
necessary fixtures and fastening with 5 mm thick clear float
glass  etc.  complete.  b)  With  powder  coating  Note
While
arriving at the rate of item of item weight at 6.90 kg/Sqm is
considered.

Providing and fixing in position aluminium fixed window full 0.00 0.00

y
glazed of any size as per detailed drawing and as directed by
Engineer in charge  with  all  necessary  alluminium  sections
including necessary fixtures and fastening such as 5 mm thic
k
clear float glass etc. complete. a) Without powder coating. N
ote    While  arriving  at  the  rate  of  item  of  item  weight
at  6.90 kg/Sqm is considered.

Providing and fixing in position aluminium fixed window full 0.00 0.00

y
glazed of any size as per detailed drawing and as directed by
Engineer in charge with all necessary alluminium sections
including necessary fixtures and fastening such as 5 mm thic
k
clear float glass etc. complete. b) With powder coating Note
While arriving at the rate of item of item weight at 6.90 kg/S
qm is considered.

Providing and fixing in position aluminium partly openable a 0.00 0.00

nd
partly fixed window of any size as per detailed drawing and
as directed  by  Engineer in charge  with  all  necessary
alluminium
sections including necessary fixtures and fastening with 5 m
m
thick float glass etc. complete. a) Without powder coating N
ote    While  arriving  at  the  rate  of  item  of  item  weight
at  6.90 kg/Sqm is considered.
Providing and fixing in position aluminium partly openable a 0.00 0.00
nd
partly fixed window of any size as per detailed drawing and
as directed  by  Engineer in charge  with  all  necessary
alluminium
sections including necessary fixtures and fastening with 5 m
m
thick float glass etc. complete. b) With powder coating Note
While arriving at the rate of item of item weight at 6.90 kg/S
qm is considered.

Providing and fixing M 40 grade thick vibrated pull cast 0.00 0.00

or
similar type concrete frame with chamfer conforming to I.S.
6524 1983 having 6 mm dia. bars 3 Nos. And stirrups @250
mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm di
a bars 500 mm long including primer and oil painting
etc, complete) frame size 60 mm x 100 mm .

Providing and fixing M 40 grade thick vibrated pull cast 0.00 0.00

or
similar type concrete frame with chamfer conforming to I.S.
6524 1983 having 6 mm dia bars 3 Nos. And strips @250 mm
c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia
bars 500 mm long including primer and oil painting etc,
complete) frame size 60 mm x 125 mm

Providing and fixing fiber glass reinforced polyster door shu 0.00 0.00

tter 30  mm  thick  as  per  IS  14856  (2000)  (Reaffirmed
2006) without  ventilator  including  chromium  plated
fixtures  and fastening  with  chromium  plated  handles  on
both  sides,  etc complete.

Providing and fixing fiber glass reinforced polyster door shu 0.00 0.00

tter 35  mm  thick  as  per  IS  14856  (2000)  (Reaffirmed
2006) without  ventilator  including  chromium  plated
fixtures  and fastening  with  chromium  plated  handles  on
both  sides,  etc complete.
Providing and fixing acrylic plastic sheet panels of approved 0.00 0.00
quality  in  required  thickness  plain  clear  or  any  colour  or
obscured  linings  in  lieu  of  glass  pans  to  doors/windows
including providing and fixing clips, putty etc. complete. (a)
2.00 mm thick.

Providing and fixing acrylic plastic sheet panels of approved 0.00 0.00

quality in required thickness plain clear or any colour or
obscured linings in lieu of glass pans to doors/windows
including providing and fixing clips, putty etc. complete. (b)
3.00 mm thick.

Providing and fixing 24 gauge plain aluminium sheet on the 0.00 0.00

face of door shutter including cutting to required size and fix
ing the screws including making good the damages if
any to
existing door shutter and frame etc. complete as directed or
as per detailed drawing

Providing and fixing in position, Double shuttered aluminiu 0.00 0.00

m
extruded powder coated openable door of specified size wit
h aluminium  door  frame  of  powder  coated  section
101.60  x
44.75mm , 3.18 mm thick and shutter comprising of powder
coated section having bottom and lock rail of size 150 mm x
44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00
mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick an
d for shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle boa
rd panels  for  bottom  panels  etc.  ,  I.S.I.  mark  ,  heavy
duty,
Hydraulic floor spring of 150 kg capacity , having heavy duty
concealed lock, necessary beading, glazing clips, PVC gaskets
,
250mm length aluminium tower bolts, 150mm dia. pad han
dle, etc.  as  per  detailed  design  and  drawing  or  as
directed  by engineer  in  charge  including  all  materials  ,
labours,  and equipment etc.complete
Providing and fixing in position, Single shuttered aluminium 0.00 0.00
extruded powder coated openable door of overall size 0.90
m x
2.40 m with aluminium door frame of powder coated sectio
n
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 15
0
mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x
3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm
thick  and  for  shutter  plain  glass  panes  5  mm  thick  for
top
panels and 12mm thick both side laminated phenol bonded
particle  board  panels  for  bottom  panels  etc.  ,  I.S.I.
mark  ,
heavy duty, Hydraulic floor spring of 150 kg capacity , having
heavy duty concealed lock, necessary beading, glazing clips,
PVC gaskets, 250mm length tower bolts, 150mm diam. pad
handle, etc. as per detailed design and drawing or as directe
d by  engineer  in  charge  including  all  materials  ,  labours,
and equipment etc.Complete
Providing and fixing in position, Single shuttered aluminium 0.00 0.00
extruded powder coated openable door of overall size 0.90
m x
2.40 m with aluminium door frame of powder coated sectio
n
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 15
0
mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x
3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm
thick  and  for  shutter  plain  glass  panes  5  mm  thick  for
top
panels and 12mm thick both side laminated phenol bonded
particle board panels for bottom panels etc. , I.S.I. mark , wit
h
bijagiri having heavy duty concealed lock, necessary beading
,
glazing clips, PVC gaskets, 250mm length tower bolts, 150m
m
diam. pad handle, etc. as per detailed design and drawing or
as
directed by engineer in charge including all materials , labou
rs, and equipment etc.Complete

Providing and fixing 50 mm x 50 mm Mild Steel square pipe 0.00 0.00

framed steel windows of various sizes as per details with wel
ded
square bars 12 mm at 10 cm center to center without hot di
p zinc coating without / with ventilator including
fabrication,
glazing with plain / obscured glass panes of approved type a
nd
quality, all fixtures and fastenings and finishing with one coa
t of primer complete.

Providing and fixing decorative grill of various sizes as per de 0.00 0.00

tail drawing and specification etc. complete.
(Prior permission to be
obtained from S.E. before execution of this item) (b) Stainles
s Steel (Weight @ 15 Kg/Sqm.)
Providing  and  fixing  in  position  powder  coated   0.00 0.00
aluminium louvered  windows  /  ventilator  of  various
sizes  with  powder coating  as  per  detailed  drawing  and
specifications  including
aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm
thick sheet glass louvers, of approved quality etc. complete.

Providing and fixing partitions made up of CCTW frame of siz 0.00 0.00

e
75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial pl
y
and 4mm thick veneer on both sides with French polish etc.
complete.

Providing and fixing Country cut teak wood partly veneered 0.00 0.00

and
partly glazed partition with 75 mm x 50 mm frame at 60 cm
center and 9 mm thick commercial ply on both sides, decora
tive
veneer of 4 mm thick and plain glass 5 mm thick, including
French polishing etc. complete

Providing and fixing welded mesh of 50 mm x 25 mm and (1 0.00 0.00

1
gauge) to Country cut teak wood frame work as per detailed
drawing or as directed, iron fastening with one coat of prime
r,
scaffolding, including TW frame work of 70 mm x 75 mm and
covering CCTW battens of 45 mm x 10 mm etc. complete.
Providng and fixing in position anodised extruded aluminum 0.00 0.00
partitions, partly glazed and partly laminated having frame
made
out of extruded tubular section of size 40 mm x 60 mm with
12
mm thick three layered flat pressed teak wood particle boar
d bonded  with  BWP  type  exterior  grade  phenol
formaldehyde synthetic  resin  conforming  to  IS  12823
1990,  laminated  on both  sides,Novateakor  equivalent
and  5  mm  thick  selected
quality plain/ float glass panels fixed with aluminum glass cli
ps 12  mm  x  12  mm  and  rubber  cushioning  beading  to
glass partitions as per approved drawing etc. compete

Providing and fixing in position extruded aluminium partitio 0.00 0.00

ns
having frame made out of extruded tubular section of size 6
5
mm x 40 mm with 12 mm thick three layered flat pressed te
ak wood particle board bonded with BWP type exterior
grade
phenol formaldehyde synthetic resin conforming to IS 12923
1990, laminated on both sides, Novateak or equivalent with
aluminium glazing clips of size 12 mm x 12 mm (conical) as p
er drawing etc. complete.

Providing and fixing fly proof mesh shutter to 0.00 0.00

ventilator/window using CCTW members of size 45 x 22 mm
for
frame work and 35 x 22 mm for middle support and fixing fl
y
proof mesh on it and covering Ghana TW battens of size 20 x
10 mm including priming and two coats of oil painting to the
new wood and steel work and all labour charges including al
l fixture and fastenings etc. complete

Providing coloured anodising treatment to aluminium sectio 0.00 0.00

ns of  the  doors  ,  windows,  and  ventilators  including  all
the intermediate  supports  ,  side  supports,  screws  and
all  the necessary  fixtures  with  all  leads,  lifts,  fixing
charges  etc.
complete ( Complete measurement on actual square meter
basis of opening area shall be paid.)
Providing and fixing aluminium grill diamond mesh type DG 0.00 0.00
202  of  7.5  mm  thick  including  fixing  in  position
anodised
aluminium frame section of 80 x 38 mm x 1.22 mm size box,
cutting to the required size with all wastage , labour, lead lift
etc. complete.

Providing and fixing in position Mild steel fixed staggered ( Z 0.00 0.00

Type ) Ventilator as per detailed drawing with hot deep zink
coating including fabricating with Mild steel 'Z 'Section of siz
e
20mm x 25 mm and 3 mm thick at weight 1.42 Kg/Rmt,with
stainless steel mosquito net of 304 Grade,4 mm thick float gl
ass ?
as directed by Engineer In charge including necessary weldin
g ,grinding, two coats of oil paint etc.complete

Providing and fixing in position anodised (as per IS 0.00 0.00

1868/1982) Aluminium fixed staggered ( Z Type )
Ventilator
with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22
mm at weight 0.650 Kg/Rmt, Aluminium angle of size 15 mm
x
15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosqu
ito
net of 304 Grade,4 mm thick float glass per detailed drawing
& as directed by Engineer in charge etc.complete.

Providing and fixing welded mesh of 11 gauge wires having 0.00 0.00

mesh size 50 mm x 25 mm including M.S Angle frame of size
35
mm x 35 mm x5 mm in position with oil painting 3 coats etc.
complete
Providing & Fixing 32 mm thick One piece single moulded pu 0.00 0.00
ff
ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for intern
al
use including toilets made up of outer ABS sheet of 1.2 mm
thick having puff insulation of 35 to 40 Kg/Cum.density and
10
mm dia.for steel bars 2 Nos., wooden block to receive fixture
s, having M.S. hinges 100 mm length, M.S. handles 150
mm length and 10 mm dia sliding door bolt etc. complete

Providing and fixing 30mm thick RAJSHRI or equivalent BRA 0.00 0.00

ND
FACTORY MADE SOLID PANEL PVC INTERNAL DOOR SHUTTE
R consisting  of  frame  made  out  of  M.S.  tubes  of  19
gauge
thickness and size of 40mm x 20mm for stiles ,top, lock &
bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame shall be cover
ed
with 5mm thick heat molded Rajshri PVC C channel of size 3
0 x
100mm forming stiles, and 5mm thick, 125mm wide PVC she
ets
for top rail, lock rail & bottom rail on either side, and 15mm
(5mm x 3) thick, 20mm wide cross PVC sheet as gap insert fo
r top rail & bottom rail. Paneling of 10 mm thick prelam PVC
sheet to be fitted in the M.S. frame welded / sealed to the s
tiles
& rails with 30mm wide x 5mm thick PVC sheet beading on
either side, and joined together with solvent cement adhesiv
e
etc. An additional 5mm thick PVC strip of 20mm width is to
be
stuck on the interior side of the C Channel using PVC solvent
cement adhesive. including stainless steel fixtures and fasten
ing Complete as per direction of Engineer in
charge, manufacturer's specification & drawing.
Providing and fixing 30mm thick RAJSHRI or equivalent BRA 0.00 0.00
ND FACTORY  MADE  PVC  FLUSH  L  DOOR  SHUTTER
consisting  of panel  of  hollow  PVC  profile  of  20  mm
thickness  consisting
frame made out of M.S. tubes of 19 gauge thickness and size
of
19mm x 19mminserted inside the hollow section of stiles rail
s top ?
and bottom rails and two 19x 19 mm MS tubes inserted
horizontally  inside  the  hollow  profile  section  using  4/5
mm
sheet using screws hollow profile shall be lipped with 10 m
m ( 5mm x2) thick x 20 mm width on stiles and rails using sol
vent
cement. The inner panel shall be laminated with 5mm thick
termite proof waterproof plain /prelam PVC sheet using solv
ent
cement on the both sides of the panel including stainless ste
el fixtures  and  fastening  etc.  Complete  as  per  direction
of Engineer in charge, manufacturers specification & drawing.

Providing and fixing partition 4 mm thick Indian teak Veneer 0.00 0.00

on
one side and 4mm commercial type plywood on the other si
de
including C.T.W. frame of 70 x 35 mm at 60 cm C/C on both
ways, including finishing with French polishing to Veneer fac
e
and oil painting / french polishing to other face etc.complete
. (without skirting)

Providing and fixing partitions with 12 mm thick three layere 0.00 0.00

d flat  pressed  teakwood  particle  board  both  faces
commercial
bonded with phenol formal dehyde synthetic resin including
CTW vertical 70 x 70 mm and top and bottom rail of 70 x 35
mm and covering batten of 20 x 10 mm at 1.00 metre apart
on
both ways or as directed including finishing with one coat of
primer complete.
Providing and fixing partitions with 12 mm thick three layerd 0.00 0.00
flat pressed teakwood commercial board compressed one fa
ce and  other  teak  veneer  bonded  with  phenol
formaldehyde
synthetic resin including CTW vertical 70 x 70 mm and top an
d
bottom rail of 70 x 35 mm and covering batten of 20 x 10 m
m at  1.00  metre  apart  on  both  ways  or  as  directed
including finishing with one coat of primer complete.

Providing and fixing partition with 12mm thick three layered 0.00 0.00

flat
pressed veneer teak wood partical board with both faces tea
k veneer bonded with phenol formaldehyde synthetic
resin
including C.T.W. vertical 70 x 70 mm and top and bottom rail
of 70 x 35 mm and covering battern of 20 x 10 mm at 1.00
metre apart on both ways or as directed including finishing
with one coat of primer complete.

Providing and fixing in position C.C.T.W. brackets for weather 0.00 0.00

sheds of section 70 x 45 mm with mortise and tenon joinery
at
1.2 to 1.5 metre center to center or as directed and teak woo
d
battens of required section, including fixing three numbers o
f
iron nut and bolts to each bracket, necessary scaffolding and
two coats of painting to wood work etc. complete.

Providing and fixing 22 B.W.G. plain galvanised iron sheets o 0.00 0.00

n
top of weather shed, including scaffolding, fixing by means o
f
nut and bolts or as directed etc. complete. (Brackets of 70 x
45 mm to be paid separately)

Providing and fixing 22 B.W.G. plain FRP sheets on top of 0.00 0.00

weather shed, including scaffolding, fixing by means of nut a
nd
bolts or as directed etc. complete. (Brackets of 70 x 45 mm t
o be paid separately)
Providing and fixing 4 mm thick plain A.C. sheets (of IS std.) 0.00 0.00
on top of the weather shed including scaffolding, fixing by
means of nuts and bolts or as directed etc. complete as per
detailed drawing (Brackets of 70 x 45 mm to be paid
separately).

Providing and fixing UV proof plastic sheet panels of approv 0.00 0.00

ed
quality in required thickness of 3 mm plain, clear or any colo
ur
or obscured (lining) in lieu of glass panels to doors/windows
including providing and fixing clips, putty etc. complete.
(Sample to be got approved from Ex.Engineer before use)

Providing and fixing country teak wood runner size 150 x 75 0.00 0.00

mm over partition, including rounding, fixing in the masonry
where necessary beading on sides etc. complete.

Providing and fixing teak wood cover moulding 45 x 20 mm 0.00 0.00

over doors and windows in the required shape & size as per
drawing, including all mouldings and finishing with
french polishing etc. complete.

Providing and fixing aluminium grill`(5.13 Kg/Sqm) decorativ 0.00 0.00

e of various sizes as per detail drawing and specification
etc.
complete. (Prior permission to be obtained from S.E. before
execution of this item) ( 5.13 Kg/Sqm)

Providing and fixing mild steel grill work for windows, 0.00 0.00

ventilators etc. 20 kg/sqm as per drawing including fixtures,
necessary welding & painting with one coats of anticorrosive
paint & two coats of oil painting complete.

Providing and fixing mild steel grill work for windows, 0.00 0.00

ventilators, etc. 15 kg/sqm as per drawing including fixtures
necessary welding and painting with one coat of anticorrosiv
e paint and two coats of oil painting complete.
Providing and fixing mild steel grill railing 20 kg/sq.m with 0.00 0.00
Ghana teak wood hand rail of size 75mm x 60 mm.and sill of
75mm.x 25 mm.and newel posts for staircases, including
fabricating, fix
tures, erecting, painting the grill work with one coat of anti
corrosive paint and two coats of oil painting with
approved colour and polishing the sill, hand rail and the new
el post with french polish.

Providing and fixing mild steel grill railing 15 kg/sq.m with 0.00 0.00

Ghanateak wood hand rail of size 75mm x 60 mm and sill of
75mm.x 25mm and newel posts for staircases, including
fabricating, fixtures, erecting, painting the grill work with on
e
coat of anticorrosive paint and two coats of oil painting with
approved colours and polishing the sill, hand rail and the ne
wel post with french polish.

Providing and erecting Y type barbed wire fencing with seve 0.00 0.00

n
rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentina
ire 0.75  mm  dia  )  with  hot  dip  and  G.I.  coated  hooks
as  per
drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr.
c/c  including  fixing  and  fastening  with  wire,  painting
M.S.
angles with one coat of red lead primer and two coat of oil
paint etc. complete.

Providing and fixing 40mm diameter and 1.5mm thick Stainl 0.00 0.00

ess steel hand railing in S.S.304 Grade including
fabricating
,fixtures, errecting , necessary welding , grinding , finishing,
buffing to stainless steel pipe etc. complete

Providing and fixing 900mm high S.S.304 Grade Stainless ste 0.00 0.00

el railing  with  40mm  diameter  and  1.5mm  thick  at
top,40mm diameter  and  1.5mm  thick  vertical  supports
spaced  at  1.5m center  to  center  and  8mm  thick
toughened  glass  including
fabricating ,fixtures, errecting , necessary welding , grinding ,
finishing, buffing to stainless steel pipe etc. complete
Providing and fixing 900mm high S.S.304 Grade Stainless ste 0.00 0.00
el railing  with  40mm  diameter  and  1.5mm  thick  at
top,40mm diameter  and  1.5mm  thick  vertical  supports
spaced  at  3.3m center  to  center  and  two  pipes  of
12mm  diameter  fixed
horizontally including fabricating ,fixtures, errecting , necess
ary
welding , grinding , finishing, buffing to stainless steel pipe e
tc. complete.Note  For  item  no.  58  to  60  prior  approval
of Superintending Engineer will be required

Providing and fixing mild steel grill railing weighing 15 kg / 0.00 0.00

sqm. with teak wood hand rail of size 75mm.x 60mm. and sil
l
75mm.x 25mm.and posts for verandah including fabricating,
fixtures, erecting and painting the grill work with one coat of
anticorrosive paint and two coats of oil paint and polishing t
he grill, hand rail with French polish. Spec. No. : Bd.U.3

Providing and fixing mild steel grill railing weighing 15 kg / 0.00 0.00

sqm. with PVC handrail cover and newel post for staircases,
including fabricating, fixtures, drilling holes in concrete / oth
er
surface, erecting the grill work, necessary welding, fixing by
nuts and bolts, fixing PVC handrail cover, with one coat of
anticorrosive paint and two coats of oil painting with approv
ed
colour and shade, remaking the damaged surface, cleaning,
etc. complete. Spec. No. : As directed by Engineer in charge.
Providing and fixing mild steel grill railing weighing 20 kg / 0.00 0.00
sqm. with PVC handrail cover and newel post for staircases,
including fabricating, fixtures, drilling holes in concrete / oth
er
surface, erecting the grill work, necessary welding, fixing by
nuts and bolts, fixing PVC handrail cover, with one coat of
anticorrosive paint and two coats of oil painting with approv
ed
colour and shade, remaking the damaged surface, cleaning,
etc. complete. Spec. No. : As directed by Engineer in charge.

Providing and laying cast iron pipes of B class of 80mm 0.00 0.00

diameter with sockets and spigot ends/ flanges and cast
centrifugally/ vertically including specials, laying pipes and b
ack filling the trench complete including excavation.

Providing and laying cast iron pipes of B class of 0.00 0.00

100mm diameter with sockets and spigot ends/ flanges
and cast
centrifugally/vertically including specials, laying pipes and b
ack filling the trench complete including excavation.

Providing and laying cast iron pipes of B class of 0.00 0.00

150mm diameter with sockets and spiget ends/ flanges
and cast
centrifugally/ vertically including specials, laying pipes and b
ack filling the trench complete including excavation.

0.00 0.00
Providing and making lead joints for 80mm diameter cast iro
n pipe line including lead and testing.

0.00 0.00
Providing and making lead joints for 100mm diameter cast ir
on pipes line including lead and testing.

0.00 0.00
Providing and making lead joints for 150mm diameter cast ir
on pipe line including lead and testing
Providing and making flanged connection for the 80mm 0.00 0.00
diameter cast iron pipe line including painting rubber inserti
on, nuts and bolts etc. complete.

Providing and making flanged connection for the 100mm 0.00 0.00

diameter cast iron pipe line including painting rubber inserti
on, nuts and bolts etc. complete.

Providing and making flanged connection for the 150mm 0.00 0.00

diameter cast iron pipe line including painting rubber inserti
on, nuts and bolts etc. complete.

Providing & fixing on walls/ ceiling/ floors, 15 mm dia. heav 0.00 0.00

y
grade having embossed as ISI Mark galvanised iron pipes we
ight
of 1.48 Kg/metre with necessary fittings. remaking good the
demolished portion and applying primer of anti corrosive
oil paint 2 coats complete.

Providing and fixing on walls/ ceiling/ floors 20 mm dia. hea 0.00 0.00

vy
grade having embossed as ISI Mark galvanised iron pipes of
1.93 kg/meter with necessary fitting remaking good the
demolished portion and applying primer of anti corrosive
oil paint, 2 coats complete.

Providing & fixing on walls/ ceiling/ floors, 25 mm dia. heav 0.00 0.00

y
grade having embossed as ISI Mark galvanised iron pipes we
ight
of 3.01 Kg/meter with necessary fittings . remaking good the
demolished portion and applying primer of anti corrosive
oil paint 2 coats complete.

Providing & fixing on walls/ ceiling/ floors, 32 mm dia. heav 0.00 0.00

y
grade having embossed as ISI Mark galvanised iron pipes we
ight
of 3.89 Kg/meter with necessary fittings . remaking good the
demolished  portion  and  applying  primer  of  anti corrosive
oil paint 2 coats etc. complete.
Providing & fixing on walls/ ceiling/ floors, 40 mm dia. heav 0.00 0.00
y
grade having embossed as ISI Mark galvanised iron pipes we
ight
of 4.49 Kg/meter with necessary fittings & remaking good th
e demolished  portion  and  applying  primer  of  anti
corrosive  oil paint 2 coats etc. complete.

Providing & fixing on walls/ ceiling/ floors, 50 mm dia heavy 0.00 0.00

grade having embossed as ISI Mark galvanised iron pipes we
ight
of 6.33 Kg/meter with necessary fittings.& remaking good th
e
demolished portion and primer of anti corrossive oil paint 2
coats etc. complete.

Providing & fixing on walls/ ceiling/ floors, 80 mm dia.heavy 0.00 0.00

grade having embossed as ISI Mark galvanised iron pipes we
ight
of 10.15 Kg/meter with necessary fittings. & remaking good
the demolished portion and applying primer of anti
corrosive oil paint 2 coats etc. complete.

Providing & fixing on walls/ ceiling/ floors, 100 mm dia.heav 0.00 0.00

y
grade having embossed as ISI Mark galvanised iron pipes we
ight
of 14.74 Kg/meter with necessary fittings. & remaking good
the demolished portion and applying primer of anti
corrosive oil paint 2 coats etc. complete.

Providing and laying in trenches 15 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes of
1.25 kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 20 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes ?of 1.63
kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.
Providing and laying in trenches 25 mm dia. medium grade 0.00 0.00
having embossed as ISI Mark galvanised iron pipes ?of 2.49
kg/meter necessary fitting remaking good the ?
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 32 mm dia.medium 0.00 0.00

grade having embossed as ISI Mark galvanised iron pipes ?
of 3.20 kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 40 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes ?of 3.68
kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 50 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes ?of 5.17
kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 80 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes ?of 8.57
kg/meter necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 100 mm dia. medium grade 0.00 0.00

having embossed as ISI Mark galvanised iron pipes ?of 12.43
kg/meter  necessary  fitting  remaking  good  the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.
Providing  and  fixing  15mm  diameter  water  meter  with   0.00 0.00
nonreturn  valve  including  strainer,  sockets/  union  nut
including water  meter  box  making  locking  arrangement
and  lock. [Without chamber].

Providing and fixing 20mm diameter water meter with 0.00 0.00

nonreturn  valve  including  strainer,  sockets/  union  nut
including water  meter  box  making  locking  arrangement
and  lock. (without chamber).

Providing and fixing 25mm diameter water meter with 0.00 0.00

nonreturn valve including strainer, sockets/ union nut and in
cluding water meter box making locking arrangement
and lock. [Without chamber].

Providing and fixing 40mm diameter water meter with 0.00 0.00

nonreturn valve including strainer, sockets/ union nut and in
cluding water meter box making locking arrangements
and lock. [Withoutchamber].

Providing and fixing 50mm diameter water meter with 0.00 0.00

nonreturn valve including strainer, sockets/ union nut and in
cluding water meter box making locking arrangement
and lock. [without chamber]

Providing and fixing 80mm diameter water meter with 0.00 0.00

nonreturn valve including strainer, sockets/ union nut and in
cluding water meter box making locking arrangement
and lock. [Without chamber].

Providing and fixing 100mm diameter water meter with non 0.00 0.00

return valve including strainer, sockets/ union nut and includ
ing water meter box making locking arrangements and
lock. [Without chamber].
Providing and fixing 15 mm diameter water meter with non 0.00 0.00
return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.

Providing and fixing 20 mm diameter water meter with non 0.00 0.00

return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.
Providing and fixing 25 mm diameter water meter with non 0.00 0.00
return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.

Providing and fixing 40 mm diameter water meter with non 0.00 0.00

return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.
Providing and fixing 50 mm diameter water meter with non 0.00 0.00
return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.

Providing and fixing 75 mm diameter water meter with non 0.00 0.00

return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.
Providing and fixing 100mm diameter water meter with non 0.00 0.00
return valve with water meter chamber 100 cm. x 50 cm. siz
e of
brick work in cement mortar 1:6, 23 cm thick on the bed of
cement concrete 1:4:8, 15 cm thick with necessary excavatio
n
in all strata, 20 mm cement plaster 1:3 proportion, cast iron
frame and cover and locking arrangement with M.S. flat and
locking including three coats of oil paint of approved quality
to
cast iron frame and cover and strainer, testing etc. complete.

0.00 0.00
Providing and fixing 15 mm dia. screw down bib/ stop tap of
brass including necessary socket union nut complete.

0.00 0.00
Providing and fixing 20 mm dia. screw down bib/ stop tap of
brass including necessary socket union nut complete.

0.00 0.00
Providing and fixing 25 mm dia. screw down bib/ stop tap of
brass including necessary socket union nut complete.

0.00 0.00
Providing and fixing screw down 15 mm dia. wheeled stop ta
p of brass including necessary sockets/union nut complete

0.00 0.00
Providing and fixing screw down for 20 mm dia. wheeled sto
p
tap of brass including necessary sockets/union nut complete
.

0.00 0.00
Providing and fixing screw down for 25 mm dia. wheeled sto
p
tap of brass including necessary sockets/union nut complete
.
Providing and fixing screw down for 32 mm dia. wheeled sto 0.00 0.00
p
tap of brass including necessary sockets/union nut complete
.

0.00 0.00
Providing and fixing screw down for 40 mm dia. wheeled sto
p
tap of brass including necessary sockets/union nut complete
.

0.00 0.00
Providing and fixing screw down for 50 mm dia. wheeled sto
p
tap of brass including necessary sockets/ union nut complet
e.

0.00 0.00
Providing and fixing screw down for 65 mm dia. wheeled sto
p
tap of brass including necessary sockets/union nut complete
.

Providing & fixing screw down for 80 mm. dia. wheeled stop 0.00 0.00

tap of brass including necessary sockets/union nut complete
.

Providing and fixing 100 mm dia. chromium plated brass 0.00 0.00

showers rose to 15mm dia. supply pipe including
necessary bend and socket complete.

Providing and fixing 15mm diameter concussion push button 0.00 0.00

type brass/gun metal self
closing tap including necessary socket complete.

Providing and fixing 25mm diameter concussion push button 0.00 0.00

type brass/gun metal self
closing tap including necessary socket complete

Providing and fixing push cock (Self closing tap) symet type 0.00 0.00

of
15 mm dia. including necessary socket, testing etc. complete
.
(Prior approval of sample and brand by Ex.Engineer is necess
ary before use.)
Providing and fixing push cock (Self closing tap) symet type 0.00 0.00
of
20 mm dia. including necessary socket, testing etc. complete
.
(Prior approval of sample and brand by Ex.Engineer is necess
ary before use.)

Providing and fixing 45 cm wide mild steel ladder of 40mm x 0.00 0.00

6
mm mild steel flat stringers and steps of 18 mm dia. mild ste
el bar for water tank including fixing it in (1:2:4) M
15 cement
concrete block 60cm x 30cm x 30cm & painting the ladder
complete.(Anti Corossive Paint)

Providing and fixing White Glazed Earthenware full stall type 0.00 0.00

Urinal  with  P.V.C.  flushing  cistern  of  5  liters  capacity
with
fitting, inlet pipes and stop tap, brackets for fixing the cistern
, 32  mm  dia.  P.V.C  flush  pipe  with  fittings  and  flushing
arrangement  including  lead  soil  pipe,  lead  trap,  soil  pipe
connectionup to the outside face of the wall

Providing and fixing White Glazed Earthenware Squatting pla 0.00 0.00

te
(Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity
with fitting, inlet pipes and stop tap, brackets for fixing the
cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing
arrangement including lead soil pipe, lead trap, soil pipe
connectionup to the outside face of the wall

Providing and fixing coloured glazed earthenware full stall ty 0.00 0.00

pe Urinal  with  P.V.C.  flushing  cistern  of  5  liters  capacity
with
fitting, inlet pipes and stop tap brackets for fixing the cistern
32mm  dia.  P.V.C.  flush  pipe  with  fittings  and  flushing
arrangement  including  lead  soil  pipe,  lead  trap  soil  pipe
connection up to the outside face of the wall.
Providing  and  fixing  white  glazed  earthenware  lipped   0.00 0.00
flat
back/corner type Urinal with PVC 5 liters flushing cistern wit
h
fittings, inlet pipe with stop tap, brackets for fixing the cister
n,
32 mm diameter P.V.C. flush pipe with fitting including lead s
oil
pipe, lead trap & soil pipe connection up to the outside face
of wall.

Providing and fixing coloured glazed earthenware lipped flat 0.00 0.00

back/corner type urinal with PVC 5 liters flushing cistern wit
h
fittings,capacity with fittings, inlet pipe and stop tap, bracket
s for fixing the cistern, P.V.C. flush pipe with fittings including
lead soil pipe, lead trap and soil pipe connection up to the
outside face of the wall.

Providing and laying 100 mm dia. half round white 0.00 0.00

glazed
earthenware pipes in 1:5:10 cement concrete bedding includ
ing bends, etc. complete.

Providing and fixing white glazed earthenware Wash Hand B 0.00 0.00

asin
of 55cm. x 40 cm. size including cold water pillar tap/cold an
d
hot water pillar tap brackets, rubber plugs and brass chain, s
top
tap and necessary pipe connections including P.V.C. waste pi
pe and trap up to the outside face of the wall.

Providing and fixing white glazed earthenware Wash Hand B 0.00 0.00

asin
of 45cm x 30cm size including cold water pillar tap/cold and
hot water pillar tap brackets, rubber plugs and brass chain, s
top
tap and necessary pipe connection including P.V.C. waste pip
e and trap up to the outside face of the wall.
Providing and fixing white glazed earthenware Wash Hand B 0.00 0.00
asin
of 63cm x 45cm size including cold water pillar tap/cold and
hot water pillar tap brackets, rubber plugs and brass chain, s
top
tap and necessary pipe connection including P.V.C. waste pip
e and trap up to the outside face of the wall.

Providing and fixing coloured glazed earthenware Wash Han 0.00 0.00

d
Basin of 55cm x 40 cm size including cold water pillar tap/col
d
and hot water pillar tap brackets, rubber plugs and brass cha
in,
stop tap and necessary pipe connection including P.V.C. wast
e pipe and trap up to the outside face of the wall.

Providing and fixing coloured glazed earthenware Wash Han 0.00 0.00

d
Basin of 45 cm x 30 cm size including cold water pillar tap/co
ld
and hot water pillar tap brackets, rubber plugs and brass cha
in,
stop tap and necessary pipe connection including P.V.C. wast
e pipe and trap up to the outside face of the wall.

Providing and fixing White glazed with bottle trap earthenw 0.00 0.00

are
Wash Hand Basin of 45x30 cm size including cold water piller
taps,  brackets,  rubber  plugs  and  brass  chain,  stop  tap,
chromium  plate  bottle  trap  and  necessary  pipe
connections
including UPAC waste pipe and trap upto the outside face of
the  wall,  making  good  the  damaged  surface,  testing  etc.
complete.  (BRAND     HINDWARE/  JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARD)
Providing and fixing White glazed with bottle trap earthenw 0.00 0.00
are
Wash Hand Basin of 55x40 cm size including cold water piller
taps,  brackets,  rubber  plugs  and  brass  chain,  stop  tap,
chromium  plate  bottle  trap  and  necessary  pipe
connections
including UPAC waste pipe and trap upto the outside face of
the  wall,  making  good  the  damaged  surface,  testing  etc.
complete.  (BRAND     HINDWARE/  JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARiv)

Providing and fixing White glazed with bottle trap earthenw 0.00 0.00

are
Wash Hand Basin of 63x45 cm size including cold water piller
taps,  brackets,  rubber  plugs  and  brass  chain,  stop  tap,
chromium  plate  bottle  trap  and  necessary  pipe
connections
including UPAC waste pipe and trap upto the outside face of
the  wall,  making  good  the  damaged  surface,  testing  etc.
complete.  (BRAND     HINDWARE/  JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARiv) .

Providing and fixing Coloured glazed with bottle trap 0.00 0.00

earthenware Wash Hand Basin of 45x30 cm. size including c
old
water piller taps, brackets, rubber plugs and brass chain, sto
p
tap, chromium plate bottle trap and necessary pipe connecti
ons
including UPAC waste pipe and trap upto the outside face of
the  wall,  making  good  the  damaged  surface,  testing  etc.
complete.  (BRAND     HINDWARE/  JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARiv)
Providing  and  fixing  Coloured  glazed  with  bottle  trap 0.00 0.00
earthenware Wash Hand Basin of 55x40 cm. size including c
old
water piller taps, brackets, rubber plugs and brass chain, sto
p
tap, chromium plate bottle trap and necessary pipe connecti
ons
including UPAC waste pipe and trap upto the outside face of
the  wall,  making  good  the  damaged  surface,  testing  etc.
complete.  (BRAND     HINDWARE/  JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARiv)

Providing and fixing Coloured glazed with bottle trap 0.00 0.00

earthenware Wash Hand Basin of 65x45 cm. size including c
old
water piller taps, brackets, rubber plugs and brass chain, sto
p
tap, chromium plate bottle trap and necessary pipe connecti
ons
including UPAC waste pipe and trap upto the outside face of
the wall, making good the damaged surface, testing etc.
complete. (BRAND HINDWARE/ JOHNSON/PARRYWARE/
VIENA/ AMERICAN STANDARiv)

Providing and fixing coloured glazed earthenware Wash Han 0.00 0.00

d
Basin of 63 cm x 45 cm size including cold water pillar tap/co
ld
and hot water pillar tap brackets, rubber plugs and brass cha
in,
stop tap and necessary pipe connection including P.V.C. wast
e pipe and trap up to the outside face of the wall.

Providing and fixing white glazed earthenware sink 600mm 0.00 0.00

x
200mm x 450mm including all connection of the G.I. supply
and P.V.C. waste pipes up to the outside face of the wall, col
d
water chromium plated screw down bib tap, rolled steel or C
.I. brackets, rubber plug with chain and stop tap complete.
Providing and fixing white glazed earthenware sink 450mm 0.00 0.00
x
200mm x 300mm including all connection of the G.I. supply
and lead waste pipes up to the outside face of the wall, cold
water chromium plated screw down bib tap, rolled steel or C
.I. brackets, rubber plug with chain and stop tap complete.

Providing and fixing Autoclosing pillar cock of pressmatic tap 0.00 0.00

of
Jaguar make or equivalent including all fixtures, fittings etc.
complete.

Providing and constructing granite kitchen platform with fixi 0.00 0.00

ng
of stainless steel sink 600 mm x 450 mm size as per detailed
drawing including vertical both side polished kadappah ston
e
25 to 30 mm thick supports with kadappah top 35 to 40 mm
thick and polished granite 16 to 20 mm top with side strips o
f granite at front and both sides of platform raised with
two
vertical granite supports 15 cm height and top granite of 75
x 40 cm including cutting, opening for sink of required size in
kadappah as well as granite etc. complete.

Providing and fixing 8cm C.I. Nahani Trap including C.I. gratin 0.00 0.00

g
bend and piece of C.I. pipe upto the outside face of the wall
complete.

Providing and fixing 10cm C.I. Nahani Trap including C.I. 0.00 0.00

grating bend and piece of C.I. pipe upto the outside face of t
he wall complete.

Providing and laying 100mm diameter half round salt glazed 0.00 0.00

stoneware pipes in brick masonry including fittings such
as
bends, tees, single junction, necessary excavation and jointin
g complete.
Providing and fixing 15cm x 10cm salt glazed stoneware gull 0.00 0.00
y
trap in cement concrete 1:4:8 outside the building including
cast iron grating in the sink, connecting glazed stoneware pip
e,
brick masonry chamber with cast iron lid and cast iron gratin
g for the gully trap.

Providing and laying 100 mm dia salt glazed stoneware pipe 0.00 0.00

including fittings such as bends, tees, single junction, double
junctions laying, jointing (including excavation and refilling t
he trenches) complete.

Providing and laying for 150 mm dia salt glazed stoneware pi 0.00 0.00

pe
including fittings Such as bends, tees, single junction, double
junctions laying, jointing (including excavation and refilling t
he trenches) complete.

Providing & laying for 225mm dia. salt glazed S.W. Pipe 0.00 0.00

including fitting such as bends, tees, single junction, double
junctions laying, jointing (including excavation & refilling the
trenches) complete

Providing and laying concrete pipes of I.S.NP. class of 100m 0.00 0.00

m diameter in proper line, level and slope including
necessary
collars, excavation, laying, fixing with collars in cement mort
ar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 150m 0.00 0.00

m diameter in proper line, level and slope including
necessary
collars, excavation, laying, fixing with collars in cement mort
ar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 225m 0.00 0.00

m diameter in proper line, level and slope including
necessary
collars, excavation, laying, fixing with collars in cement mort
ar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 300m 0.00 0.00
m diameter in proper line, level and slope including
necessary
collars, excavation, laying, fixing with collars in cement mort
ar 1:1 and refilling the trench complete.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber 60cm x 45cm x 90cm including 1:4:8 cement
concrete
foundation 1:2:4 cement concrete channels half round G.S.W
.
pipes, Brick Masonry, plastering from inside and airtight C. I.
lid 65 kg with frame fixed in cement concrete etc. complete.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber 90cm x 45cm x 90cm including 1:4:8 cement
concrete foundation 1:2:4 cement concrete channels half
round
G.S.W.pipes, Brick Masonry, plastering from inside and C.I. li
d cover 75 kg with frame fixed in cement concrete.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber 60cm x 45cm x 90cm including 1:4:8 cement
concrete
foundation 1:2:4 cement concrete channels half round G.S.W
. pipes, Brick Masonry, plastering from inside and with
frame
fixed in cement concrete etc. complete with R.C.C. Cover.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber 90cm  x  45cm  x  90cm  including  1:4:8  cement
concrete foundation  1:2:4  cement  concrete  channels  half
round G.S.W.pipes,  Brick  Masonry,  plastering  from  inside
and  with frame fixed in cement concrete with R.C.C. Cover. ?

Providing and constructing Brick Masonry inspection Chamb 0.00 0.00

er 90cm  x  45cm  including  1:4:8  C.C  foundation,  1:2:4
C.C.channels/half  round  glazed  stoneware  pipe  channel,
salt glazed stone
ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, with C.I. lead cover with frame fixed in cement
concrete.
Providing  and  constructing  Brick  Masonry  inspection  trap 0.00 0.00
Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4
C.C.channels/half  round  glazed  stoneware  pipe  channel,
salt glazed stone
ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, fixed in cement concrete with R.C.C. Cover.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber
60cm x 45cm With R.C.C. raft in B.C. soil area including cost
of reinforcement, 1:2:4 cement concrete channels half
round
G.S.W. pipes, Brick Masonry, plastering from inside and airti
ght 75 mm thick R.C.C. cover etc. complete.

Providing & constructing Brick Masonry Inspection 0.00 0.00

Chamber
90cm x 45cm With R.C.C. raft in B.C. soil area including cost
of reinforcement, 1:2:4 cement concrete channels half
round
G.S.W. pipes, Brick Masonry, plastering from inside and airti
ght with 75 mm thick R.C.C. cover etc. complete.

Providing and fixing hume pipe septic tank 900mm diameter 0.00 0.00

with vent pipe and cap including necessary (including
excavation and laying)

Providing soak pit of size 120cm x 120cm x 120cm including 0.00 0.00

excavating and filling with brick bats.

Providing and fixing 450mm x 550mm size superior type 0.00 0.00

Belgium mirror with 16mm dia. nickel plated towel rod etc.
complete.

Providing, laying & fixing P.V.C. pipe of 15mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 20mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete
Providing, laying & fixing P.V.C. pipe of 25mm dia. with fittin 0.00 0.00
gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 32mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 40mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 50mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 75mm dia. with fittin 0.00 0.00

gs
such as bends, tees, reducers, clamps, etc. including necessa
ry excavation, trench filling etc. complete.

Providing, laying & fixing P.V.C. pipe of 110 mm. dia. with 0.00 0.00

fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete

Providing and fixing partition with kadappa stone of all sizes 0.00 0.00

and 25 mm thick polished on both side and edges to original
including fixing in position in cement mortor 1:4 curing polis
hing, cleaning etc complete.

Providing and fixing Orissa type white glazed earthenware 5 0.00 0.00

75
mm water closet pan including S trap with earthenware foot
rests, cast iron soil and vent pipe upto outside face of the wa
ll
1:2:4 brick bat lime concrete bedding without flushing tank
and its accessories etc. complete.

0.00 0.00
Providing and fixing chromium plated towel rod 16 mm dia a
nd 75 cm. in length including all accessories complete.
Providing and Fixing half turn 25 mm dia gun metal flushing 0.00 0.00
cock including all accessories etc. complete.

Providing and fixing 1st class white glazed earthenware Oriss 0.00 0.00

a
Type W.C. Pan 580 mm dia including P or S trap cast iron soil
and vent pipe upto the outside face of the wall (1:5:1
0)
cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing
cistern with all necessary pipe connection etc. complete.

Providing and fixing European type white glazed earthenwar 0.00 0.00

e
coupled closet symphonic trap with symphonic low level whi
te
glazed 10 litres cistern with black backlite seat with all neces
sary pipe connection etc. complete.

Providing & fixing orissa type colour glazed earthenware 625 0.00 0.00

x
450 mm. w.c. pan including trap, C.I. soil & vent pipe upto th
e out side face of wall including 100 mm. dia. C.I. plug, bend,
15mm. thick 10 litre PVC flushing cistern with all necessary p
ipe connection etc. complete.

Providing and fixing 40 mm. dia Ball cock medium type with 0.00 0.00

PVC float including sockets & necessary fittings and tested as
per municipal requirements etc. complete.

Providing and fixing 15 mm. dia Ball cock medium type with 0.00 0.00

PVC float including sockets & necessary fittings and tested as
per municipal requirement etc. complete.

Cleaning elevated water storage Reservoir within a given per 0.00 0.00

iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. i)Tank capacity up to
2,000 litre.
Cleaning elevated water storage Reservoir within a given per 0.00 0.00
iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. ii) Tank capacity up t
o 2,001 to 5000 litre.

Cleaning elevated water storage Reservoir within a given per 0.00 0.00

iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. v) Tank capacity upto
10,001 to 15,000 litre.
Cleaning elevated water storage Reservoir within a given per 0.00 0.00
iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. vi) Tank capacity upt
o 15,001 to 20,000 litre.

Cleaning elevated water storage Reservoir within a given per 0.00 0.00

iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. ix) Tank capacity up t
o 40,001 to 50000 litre.
Cleaning elevated water storage Reservoir within a given per 0.00 0.00
iod,
by using bleaching powder at the rate of 14 gm/sq.m .washi
ng
thrice potassium permanganate at the rate of 2.50 gm/sq.m.
finally, cleaning washing by using nylon brush, coir string an
d
duster, bailing out water etc. complete. x) capacity 50,001 lit
re to one lakh.

Cleaning elevated water storage Reservoir within a given per 0.00 0.00

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. 0.00 0.00

soil
vent/waste pipe and with necessary fixtures and fitting such
as
bends, tees, single junctions, slotted vent, clamps etc. compl
ete
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil 0.00 0.00
vent/waste pipe and with necessary fixtures and fitting such
as bends, tees, single junctions, slotted vent, clamps etc.
complete.

Providing and fixing H.D.P container Syntex or alike one piec 0.00 0.00

e
moulded water tank made out of high density polythyler an
d
built corrugated inclusive of delivery up to destination hoisti
ng and fixing of accessories such as inlet,outlet overflow
pipe
inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing H.D.P container Syntex or alike one piec 0.00 0.00

e
moulded water tank made out of low density polythyler and
built corrugation including of delivery up to destination hois
ting
and fixing of accessories such as inlet, outlet overflow of all
tanks capacity above 1000 to 20,000 litres

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC 0.00 0.00

pipe with necessary fittings, remaking good the
demolished portion etc. complete.

Water Supply and Sanitary Fitting 0.00 0.00

42.56 BDV 5 0.00 0.00
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC 0.00 0.00
pipe with necessary fittings, remaking good the
demolished portion etc. complete.

BD.V 5 page 551 and as directed by Engineer in charge 0.00 0.00

Running Metre 195 23 0.00 0.00
Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC 0.00 0.00
pipe with necessary fittings, remaking good the
demolished portion etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC 0.00 0.00

pipe with necessary fittings, remaking good the
demolished portion etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC 0.00 0.00

pipe with necessary fittings, remaking good the
demolished portion etc. complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC 0.00 0.00

pipe with necessary fittings, remaking good the
demolished portion etc. complete.
Providing and laying in trenches 15 mm dai. CPVC pipe 0.00 0.00
including necessary excavation, fittings. Refilling trenches etc
. complete

Providing and laying in trenches 20 mm dai. CPVC pipe 0.00 0.00

including necessary excavation, fittings. Refilling trenches etc
. complete.

Providing and laying in trenches 25 mm dai. CPVC pipe 0.00 0.00

including necessary excavation, fittings. Refilling trenches etc
. complete.

Providing and laying in trenches 32 mm dai. CPVC pipe 0.00 0.00

including necessary excavation, fittings. Refilling trenches etc
. complete.

Providing and laying in trenches 40mm dai. CPVC pipe 0.00 0.00

including necessary excavation, fittings. Refilling trenches etc
. complete.

Providing and laying in trenches 50mm dai. CPVC pipe 0.00 0.00

including necessary excavation, fittings. Refilling trenches etc
. complete.

Providing and fixing 10 cm PVC nahani trap with grating etc. 0.00 0.00

complete.

Providing and fixing reinforced cement concrete cover of size 0.00 0.00

90 cm x 45 cm with frame over inspection chamber etc.
complete. Heavy duty (225 kg)

Providing and fixing reinforced cement concrete cover of size 0.00 0.00

90 cm x 45 cm with frame over inspection chamber etc.
complete. Medium duty (140 kg)

Providing and fixing reinforced cement concrete cover of size 0.00 0.00

60 cm x 45 cm with frame over inspection chamber etc.
complete. Heavy duty (160 kg)

Providing and fixing reinforced cement concrete cover of size 0.00 0.00

60 cm x 45 cm with frame over inspection chamber etc.
complete.Medium duty (100 kg)

Providing and making ISI Mark ferrule connection of 15 mm 0.00 0.00

dia. to water main including ferrule coupling cast iron
bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.
Providing and making ISI Mark ferrule connection of 20 mm 0.00 0.00
dia. to water main including ferrule coupling cast iron
bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.

Providing and making ISI Mark ferrule connection of 0.00 0.00

25mm dia.to water main including ferrule coupling cast
iron bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.

Providing and making ISI Mark ferrule connection of 32 mm 0.00 0.00

dia. to water main including ferrule coupling cast iron
bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.

Providing and making ISI Mark ferrule connection of 40mm 0.00 0.00

dia.
to water main including ferrule coupling cast iron bell mouth
cover, built in non return valve and fixing including excavatio
n and reinstatement complete.

Providing and making ISI Mark ferrule connection of 50 mm 0.00 0.00

dia. to water main including ferrule coupling cast iron
bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.

Providing and fixing stainless steel sink of size 600 x 510 x 20 0.00 0.00

0
mm of Nirali or equivalent make incluidng coupling, outlet pi
pe,
elbow and other necessary fitting, finishing etc. complete.

Providing and fixing C.P. Angular stop clock with wall flange 0.00 0.00

Jaquar make or equivalent continental (CAT.NO. CON 059)
including necessary sockets/union nut etc. complete.

Providing and fixing C.P.Two way BIB cock jaquar make or 0.00 0.00

equivalent continental (CAT.NO. CON
041) including necessary sockets/union nut etc. complete.
Providing and fixing C.P. wall mixer with provision for overhe 0.00 0.00
ad
shower with 115mm long bend pipe & wall flange jaquar or
equivalent ?make continental (CAT.NO. CON 273 UPR)
including necessary sockets/union nut etc. complete.

Providing and fixing C.P. pillar cock long neck with aerator 0.00 0.00

jaquar or equivalent make continental (CAT.NO. CON
021) including necessary sockets/union nut etc. complete.

Providing and fixing C.P. BIB cock with wall flange jaquar or 0.00 0.00

equivalent make continental (CAT.NO. CON 047) including
necessary sockets/ union nut etc. complete.

Providing and fixing C.P. sink cock with raised "J" 0.00 0.00

shaped
swinging casted spout jaquar or equivalent make continental
(CAT.NO. CON 359) including necessary sockets/ union nut
etc. complete.

Providing and fixing P.V.C. Rain water pipes of 160mm outer 0.00 0.00

diameter  and  having  wall  thickness  of  2.2  to  2.7  mm
confirming  to  I.S.  13592 1992  including  proper  rainwater
receiving recess with P.V.C. plug, bend, necessary fittings, suc
h as,  offsets,  shoes,  inluding  fixing  the  pipe  on  wall
using
approved wooden cleats projecting 25mm to 40mm from fac
e of  wall  a  fixing  with  clips  of  approved  quality  and
number
,filing the joint using rubber gasket with solvent cement and
properly resting the shoe of pipes on C.C. or masonry blocks,
including necessary scaffolding and maintenance for 3 yrs fo
r
any leakages or dislocations of pipes. All the P.V.C. fittings an
d additional  2  piece  socket  clips  shall  be  got  approved
from
engineer in charge etc. complete. (The contractor shall give 3
yrs guarantee bond for payment)
Providing  and  fixing  European  type  wall hung  white   0.00 0.00
water
closet of Paryware / Hindware with push valve concealed ty
pe with cover plate 32mm size of JAQUAR MAKE SERIES FLV
1095 including  soil  pipe  ,vent  pipe  up  to  outside  face  of
wall ,100mm  dia.  G.I.  plug  bend  inlet  pipe  all  fittings,
cutting& making good walls, floors etc. complete.

Providing and Fixing 110 mm diameter PVC Rain Water pipe 0.00 0.00

with necessary fittings such as bends, tees, single junctions,
slotted vent, clamps etc complete.

providing and fixing oval type under counter wash hand basi 0.00 0.00

n of 16 inch x 22 inch size and of special colour shade having
telephonic black / coloured granite of 180 mm thick
stone
black kadappa framework including chromium plated coupli
ng
bottle Trap using CERA company or equivalent oval typa wa
sh
basin model no 3448 as per detailed drawing or as directed
by engg incharge etc complete.

Providing and laying in walls/ceilings/floors 15 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 1.25 kg/metre necessary fitting remaking good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 20 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 1.63 kg/metre necessary fitting remaking good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 25 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes  of  2.49  kg/metre  necessary  fitting  remaking  good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.
Providing  and  laying  in  walls/ceilings/floors  32  mm  dia. 0.00 0.00
medium grade having embossed as ISI Mark galvanised iron
pipes  of  3.20  kg/metre  necessary  fitting  remaking  good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 40 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 3.68 kg/metre necessary fitting remaking good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 50 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 5.17 kg/metre necessary fitting remaking good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 80 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 8.57 kg/metre necessary fitting remaking good
the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in walls/ceilings/floors 100 mm dia. 0.00 0.00

medium grade having embossed as ISI Mark galvanised iron
pipes of 12.43 kg/metre necessary fitting remaking good the
demolished portion with filling trenches and with primer of
anticorrosive oil paint , 2 coats complete.

Providing and laying in trenches 15 mm dia.heavy grade havi 0.00 0.00

ng
embossed as ISI Mark galvanised iron pipes of 1.48 kg/metr
e
necessary fitting remaking good the demolished portion wit
h filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.
Providing  and  laying  in  trenches  20  mm  dia.  heavy   0.00 0.00
grade having  embossed  as  ISI  Mark  galvanised  iron
pipes  of  1.93 kg/metre  necessary  fitting  remaking  good
the  demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 25 mm dia. heavy 0.00 0.00

grade having  embossed  as  ISI  Mark  galvanised  iron
pipes  of  3.01 kg/metre  necessary  fitting  remaking  good
the  demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 32 mm dia. heavy 0.00 0.00

grade having  embossed  as  ISI  Mark  galvanised  iron
pipes  of  3.89 kg/metre  necessary  fitting  remaking  good
the  demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 40 mm dia. heavy 0.00 0.00

grade having  embossed  as  ISI  Mark  galvanised  iron
pipes  of  4.49 kg/metre  necessary  fitting  remaking  good
the  demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 50 mm dia. heavy 0.00 0.00

grade having  embossed  as  ISI  Mark  galvanised  iron
pipes  of  6.33 kg/metre  necessary  fitting  remaking  good
the  demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 80 mm dia. heavy 0.00 0.00

grade
having embossed as ISI Mark galvanised iron pipes of 10.15
kg/metre necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.

Providing and laying in trenches 100 mm dia. heavy 0.00 0.00

grade
having embossed as ISI Mark galvanised iron pipes of 14.74
kg/metre necessary fitting remaking good the
demolished
portion with filling trenches and with primer of anti
corrosive oil paint , 2 coats complete.
Providing and fixing 8 cm rigid PVC Nahani trap including PV 0.00 0.00
C
grating ,bend, connecting piece of UPVC pipe up to the outsi
de
face of wall ,making the good damaged surface and testing e
tc.
complete ( Prior approval of sample and brand by Ex. Engr. is
necessary before use)

Providing and fixing 15 cm rigid PVC Nahani trap including P 0.00 0.00

VC
grating ,bend,connectingpiece of UPVC pipe up to the outsid
e
face of wall ,making the good damaged surface and testing e
tc.
complete ( Prior approval of sample and brand by Ex. Engr. is
necessary before use)

Providing and fixing European type white glazed earthenwar 0.00 0.00

e
water closet pan with UPVC seat and lid with chromium plat
ed
brass hinges and rubber buffers including UPVC and vent pip
e up  to  the  outside  face  of  wall  10  litre  enameled  low
level
flushing cistern with fittings pipe stop tap brackets for fixing
cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,
20 mm  dia.UPVC  overflow  pipe  ,mosquito  proof
couplings  G.I.
chain and pulley,with water Jet and fitting including cutting
and making good to the walls and floors testing etc. complet
e. (prior  approval  of  sample  and  brand  by  Ex.  Engineer
is necessary before use)
Providing and fixing European type white glazed earthenwar 0.00 0.00
e
water closet pan with UPVC seat and lid with chromium plat
ed
brass hinges and rubber buffers including UPVC and vent pip
e
up to the outside face of wall without flushing cistern with fl
ush
cock and with water Jet and necessary fittings including cutti
ng
and making good to the walls and floors testing etc. complet
e.
( prior approval of sample and brand by Ex. Engineer is nece
ssary before use)

Providing and fixing European type Colour glazed earthenwa 0.00 0.00

re
water closet pan with UPVC seat and lid with chromium plat
ed
brass hinges and rubber buffers including UPVC and vent pip
e up  to  the  outside  face  of  wall  10  liter  enameled  low
level
flushing cistern with fittings pipe stop tap brackets for fixing
cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,
20 mm  dia.UPVC  overflow  pipe  ,mosquito  proof
couplings  G.I.
chain and pulley,with water Jet and fitting including cutting
and making good to the walls and floors testing etc. complet
e.
( prior approval of sample and brand by Ex. Engineer is nece
ssary before use)
Providing and fixing European type Colour glazed earthenwa 0.00 0.00
re
water closet pan with UPVC seat and lid with chromium plat
ed
brass hinges and rubber buffers including UPVC and vent pip
e
up to the outside face of wall without flushing cistern with fl
ush
cock and with water Jet and necessary fittings including cutti
ng
and making good to the walls and floors testing etc. complet
e.
( prior approval of sample and brand by Ex. Engineer is nece
ssary before use)

Providing and fixing Anglo Indian type white glazed 0.00 0.00

earthenware water closet pan with trap with UPVC seat and
lid
with chromium plated brass hinges and rubber buffers inclu
ding
UPVC and vent pipe up to the outside face of wall with flushi
ng cistern  and  necessary  fittings  including  cutting  and
making good  to  the  walls  and  floors  testing  etc.
complete.(  prior approval  of  sample  and  brand  by  Ex.
Engineer  is  necessary before use)

Providing and fixing high level 10 liter capacity with fittings 0.00 0.00

inlet PVC pipe with stop tap ,brackets for fixing the cistern,3
2
mm dia. PVC flush pipe with fitting and clamps 20 mm dia. P
VC
overflow pipe with mosquito proof couplings, galvanised iro
n chain and pulley painting if ordered to cistern pipe etc. and
cutting and making good the damaged wall and testing etc.
complete ( Prior approval of sample and brand by Ex. Engr. is
necessary before use)

Providing and fixing in position UPVC ultra violet stabilized 1 0.00 0.00

10 mm outer diameter cowl dome confirming to I.S. 4985
including making joints with solvent cement etc. complete
Providing and fixing Glass self 125 mm wide and 600 mm lon 0.00 0.00
g
with necessary chromium plated brackets providingT.W.gutti
es etc. complete

Providing , constructing & fixing Supreme make or equivalen 0.00 0.00

t
make Ultra 250 mm dia. Inspection chamber made up of UP
VC
material of thickness 3.5 mm & height of 259 mm with inlet
&
outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pi
pe
of Upvc material having height of 470 mm and fixing Ultra 2
50 mm dia. UPVC cover & frame in 150 mm thick in c.c.1:2:4,
having crushed sand bed of 100 mm thick of size 550 mm dia
.
Including excavation & refilling the sides of chamber by crus
hed sand cushioning 150 mm thickness, connecting all
required UPVC fittings with rubber lubricant etc. complete.

Providing , constructing & fixing Supreme make or equivalen 0.00 0.00

t make  Ultra  450  mm  dia.  Inspection  chamber  made  up
of Polypropylene/polyethylene  material  of  thickness  3.5
mm  &
height of 388 mm with 160 or 200 mm main inlet (s) outlet
&
110 & / or 160 mm branch inlets, with 450 mm dia. Ultra sha
ft
pipe of HDPE material having height of 460 mm, having R.C.
C. cover  &  frame  fixing  in  150  mm  thick  in  c.c.1:2:4,
having crushed  sand  bed  of  150  mm  thick  of  size  750
mm  dia.
Including excavation & refilling the sides of chamber by sand
crushed cushioning 150 mm thickness, connecting all require
d UPVC fittings with rubber lubricant etc. complete.
Providing , constructing & fixing Supreme make or equivalen 0.00 0.00
t make  Ultra  600  mm  dia.  Inspection  chamber  made  up
of
Polypropylene/polyethylene material Having 315 mm diame
ter
inlet(s)/outlets & with eccentric reducers as per requirement
to
connect 160 mm & 200 mm pipes having thickness of 5 mm
&
600 mm in height, with inbuilt shaft achieve the invert depth
as
per site condition of wall thickness of 5 mm having R.C.C. co
ver
& frame fixing in 150 mm thick in c.c.1:2:4, having crushed
sand  bed  of  150  mm  thick  of  size  750  mm  dia.
Including excavation & refilling the sides of chamber by ?
sand crushed
cushioning 150 mm thickness, connecting all required UPVC
fittings with rubber lubricant etc.complete.

Providing , laying & fixing ,jointing Supreme Eco drain 110 0.00 0.00

mm SN 8 Nu Drain Upvc pipes or of equivalent make,
manufacture as per EN 13476 or equivalent as per I.S.15328
with fittings such a bends, tees, coupler, etc, jointing
with
rubber lubricant including necessary excavation, trench refill
ing with selective excavated material etc. complete.

Providing , laying & fixing ,jointing Supreme Eco drain 160 0.00 0.00

mm  SN  4  Nu   Drain  Upvc  pipes  or  of  equivalent  make,
manufacture as per EN 13476 or equivalent as per I.S.15328
with fittings such a bends, tees , coupler, etc, jointing with
rubber lubricant including necessary excavation, trench refill
ing with selective excavated materialetc. complete.
Providing , laying & fixing ,jointing Supreme Eco  drain 200 0.00 0.00
mm  SN  4  Nu   Drain  Upvc  pipes  or  of  equivalent  make,
manufacture as per EN 13476 or equivalent as per I.S.15328
with fittings such a bends, tees tees, coupler etc, jointing wit
h
rubber lubricant including necessary excavation, trench refill
ing with selective excavated materialetc. complete.

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super bib tap with flange
including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super Two Way bib tap w
ith
flange and extender including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super push button type c
ock / tap with flange including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super wall sink type tap
with flange including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super jet spray with flang
e 2 in 1 faucet 1.50 metre long including all accessories
etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super right angle stop ta
p with flange including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft 0.00 0.00

type
Supreme make or equivalent make super Pillar tap with flan
ge including all accessories etc complete
Guniting by dry mix process as per IS 9012 (1978) to ceiling 0.00 0.00
sofit etc. in C.M. 1:3, 20 mm thick under pressure of 2.1 kg t
o 2.8 kg per sq.cm including forms, scaffolding, floating
the surface, curing for 14 days etc. complete. (Excluding
reinforcement).

Guniting by dry mix process as per IS 9012 (1978) to ceiling 0.00 0.00

sofit etc. in C.M. 1:3, 25mm thick under pressure of 2.1 kg to
2.8 kg per sq.cm. including forms, scaffolding, floating
the surface, curing for 14 days etc. complete. (Excluding
reinforcement).

Guniting by dry mix process as per IS 9012 (1978) to ceiling, 0.00 0.00

sofit etc. in c.m. 1:3, 40mm thick under pressure of 2.1 Kg. to
2.8 Kg. per sq.m. including forms, scaffolding, floating
the surface, curing for 14 days etc. complete. (Excluding
reinforcement)

Guniting by dry mix process as per IS 9012(1978) to ceiling, 0.00 0.00

sofit etc. in C.M. 1:3, 50mm thick under pressure of 2.1 kg to
2.8 kg per sq.cm. including forms, scaffolding, floating
the surface, curing for 14 days etc. complete. (Excluding
reinforcement).

Guniting by dry mix process as per IS 9012 (1978) to beams i 0.00 0.00

n C.M. 1:3, 20 mm thick under pressure of 2.1 kg to 2.8 kg
sq.cm. including forms, scaffolding, floating the surface, curi
ng for 14 days etc. complete. (Excluding reinforcement).

Guniting by dry mix process as per IS 9012 (1978) to beams i 0.00 0.00

n
C.M. 1:3, 25mm thick under pressure of 2.1 kg to 2.8 kg per
sq.cm. including forms, scaffolding, floating the surface, curi
ng for 14 days etc. complete. (Excluding reinforcement).

Guniting by dry mix process as per I.S. 9012 (1978) to the 0.00 0.00

vertical surface (other than column) in C.M. 1:3, 20 mm thick
under pressure of 2.1 Kg. to 2.8 Kg per sq.cm. including form
s, scaffolding, floating, the surface curing for 14 days
etc. complete. (excluding reinforcement).
Guniting by dry mix process as per IS 9012 (1978) to vertical 0.00 0.00
surface (other than column) in C.M. 1:3, 25 mm thick under
pres sure of 2.1 Kg. to 2.8 Kg. per sq.cm. including forms,
scaffold ing, floating the surface, curing for 14 days etc.
complete (excluding reinforcement).

Providing and erecting 1.5 metre high wire fencing with seve 0.00 0.00

n
rows of barbed wire supported on M.S.Angles (50 mm x 50
mm
x 6mm) at 2.5 Metres, center to center including excavating
pits
for foundation, fixing post in cement concrete 1:4:8 of size 4
5
x 45 x 45 cm . fastening the wire and painting the M.S.Angle
s
with one coat of red lead primer and two coats of painting e
tc. complete.

Providing and fixing mild steel grill gate with angle iron fram 0.00 0.00

e 65 mm x 65 mm x 10 mm with iron bars at 150mm.C/C and
diagonal  flats  as  per  the  detailed  drawing  including
hinges, pivot  blocks  locking  arrangement,  welding
riveting  and  oil
painting of three coats of approved shade. Weight of gate 35
Kg/smt.

Providing and fixing 90 cm. x 60 cm. Marble plate engraving 0.00 0.00

10cm. height letter, figures including painting the lefters/figu
res with approved colour and shade complete.

Providing and fixing 90 cm. x 60 cm. Granite plate engraving 0.00 0.00

10cm. height letter, figures including painting the lefters/figu
res with approved colour and shade complete.

Providing and erecting 1.2 meter high wire fencing with five 0.00 0.00

rows of barbed Wire supported on mild steel
angle(50x50x6mm) post at 2.5 m c/c including excavation of
pits of foundation concrete fixing the posts in (1:4:8) cement
concrete block of 45x45x45 cm and fastening the Wires and
painting the angles with one coat with red lead primer and t
wo coats of oil painting etc. complete.
Providing and fixing rain tattis with bamboos and karve gras 0.00 0.00
s
with 75 mm thick grass and removing the same after rain is
over
(size of bamboos 50mm to 75mm. dia and 3 M to 3.5 M. lon
g.

Providing and fixing grass chhapper (roof) with 0.00 0.00

necessary bamboos and karve frame with 75 mm. thick
grass etc,
removing the same after rain is over (size of bamboos 50 m
m to 75 mm dia and 3 M to 3.5 M. long.)

Providing and fixing grass chhapper (roof) with 0.00 0.00

necessary bamboos and karve frame with 75 mm. thick
grass etc,
removing the same after rain is over (size of bamboos 25 m
m dia and 3 M. to 3.5 M. long

0.00 0.00
Providing and fixing Bamboo Matting screen for partition wi
th bamboo sticks.

Providing and fixing lightening conductor system comprising 0.00 0.00

of erecting  Air Termination  consisting  of  tubular  copper
rod  of
25mm dia. 1.2mm thick with multiple points head 1.2mt. lo
ng
(Heavy Duty) welded or clamped to G.I. pipe pole B Grade
50mm dia. of required length with M.S. round base plate 25
cm.
diam. and 10mm thick at bottom embeded in cement concre
te 1:3:6  foundation  of  size  45cm  diam.  x  45cm  Height
and
providing earthing with copper earth plate of size 60 x 60 x
0.3cms  with  cadmium  plated  nut  bolts  to  fix  earthing
strip
burried in specially prepared earth pit 1.5 metre below grou
nd level  with  40  Kg  charcoal  and  salt  with  alternate
layers  of
charcoal and salt and G.I. pipe 40mm dia. 2 metrer length
burried in earth upto earthling plate remaining portion abov
e
ground level for watering and refilling complete. Note   Copp
er
strip from lightening conductor is not considered in this item
.
Providing and fixing copper strip 25 mm wide and 3 mm thic 0.00 0.00
k
for lightening conductor including fixing with screws require
d scaffolding  etc.  complete.  Note     Lightening  conductor
and earthing pit is not considered in this item.

Providing and fixing in position alluminium strips of size 50 0.00 0.00

mm. x 3 mm. for nosing the steps including fixing with screw
s
and raval plugs, bending and cutting to the required shape a
nd size, finishing with paint, necessary mortar bedding
of 1:3
cement mortar to get exact line and level including watering
and curing etc. complete.

Providing and fixing crimped wire G.I. mesh of size 20mm x 0.00 0.00

20mm 10 guage to iron angle frame including welding crimp
mesh to angle frame and steel flat, fixing the frame in
its
original position and oil painting etc. complete. (excluding co
st of structural steel)

Providing general pest control service to big size 0.00 0.00

inspection
chamber to control nuisance of the cockroaches, etc. comple
te during years with monthly check up.

Providing and fixing welded mesh fabric for guniting of mesh 0.00 0.00

size 75mm x 75mm and 10 gauge thick including scaffolding
etc. complete.

Providing and fixing welded mesh fabric for guniting of mesh 0.00 0.00

size  150mm  x  150mm  and  10  gauge  I.e.  3.25mm  thick
including scaffolding etc. complete.
Providing 1 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00
e
Powder 50, Stored Pressure Type, Pressure Gauge Gross Wei
ght
2.3 kg, Empty Weight 1.3 kg, Can Height 295 MM, Diameter
87
MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism, Range minimum 4 meters, applicable on Class A
BC
and electrically started Fire, A Rating 5A, B Rating 13B Can
Construction: Deep drawn & Co. Mig welded valve constructi
on
Forging and Machining, internal Coating of Can: Epoxy powd
er coating,  External  Coating  of  Can:  Epoxy  Polyster
powder Coating,  Sheet  metal  THickness:  1.60  MM,  with
5  Years Warranty etc.complete.

Providing 2 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00

e
Powder 50, Stored Pressure Type, Pressure Gauge Gross Wei
ght
3.6 kg, Empty Weight 1.6 kg, Can Height 341 MM, Diameter
108  MM,  Discharge  Time  less  than  8  Secs,  Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 5A, B Rating
21B Can  construction:  Deep  drawn  &  Co.  Mig  welded,
Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Ye
ars Warranty etc.complete.
Providing 4 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00
e
Powder 50, Stored Pressure Type, Pressure Gauge Gross Wei
ght
6.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter
140  MM,  Discharge  Time  :  less  than  9  Secs,  Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 13A, B Rating
55B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.

Providing 6 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00

e
Powder 50, Stored Pressure Type, Pressure Gauge Gross Wei
ght
9.5 kg, Empty Weight 3.5 kg, Can Height : 435 MM, Diameter
160 MM, Discharge Time : less than 9 Secs, Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 21A, B Rating
89B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.
Providing 9 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00
e
Powder 50, Stored Pressure Type, Pressure Gauge Gross Wei
ght
13.8 kg, Empty Weight 4.8 kg, Can Height : 611 MM, Diamet
er 175 MM, Discharge Time : less than 18 Secs,
Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 21A, B Rating
89B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.

Providing 2 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00

e
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
3.6 kg, Empty Weight 1.6 kg, Can Height 108 MM, Diameter
175  MM,  Discharge  Time  less  than  8  Secs,  Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 8A, B Rating
34B Can  construction:  Deep  drawn  &  Co.  Mig  welded,
Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.
Providing 4 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00
e
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
6.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter
140  MM,  Discharge  Time  :  less  than  9  Secs,  Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 13A, B Rating
55B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.

Providing 6 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00

e
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
9.5 kg, Empty Weight 3.5 kg, Can Height : 435 MM, Diameter
160 MM, Discharge Time : less than 9 Secs, Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 21A, B Rating
89B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.
Providing 9 kg Fire Extinguisher Mono Ammonium Phosphat 0.00 0.00
e
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
13.8 kg, Empty Weight 4.8 kg, Can Height : 611 MM, Diamet
er 175 MM, Discharge Time : less than 12 Secs,
Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class ABC and electrically started Fire, A Rating 27A, B Rating
144B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and E
N Approved with 5 Years Warranty etc.complete.

Providing 25 kg Fire Extinguisher Mono Ammonium Phospha 0.00 0.00

te
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
71 kg, Empty Weight 46 kg, Can Height : 1190 MM, Diameter
300  MM,  Discharge  Time  :  less  than  30  Secs,
Controllable
discharge mechanism, Range minimum 6 meters, applicable
on
Class ABC and electrically started Fire, Can construction: Dee
p drawn  &  Co.  Mig  welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 4 MM, with one Years Warranty etc.comple
te.
Providing 50 kg Fire Extinguisher Mono Ammonium Phospha 0.00 0.00
te
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght
125 kg, Empty Weight 75 kg, Can Height : 1190 MM, Diamet
er 400  MM,  Discharge  Time  :  less  than  50  Secs,
Controllable
discharge mechanism, Range minimum 8 meters, applicable
on
Class ABC and electrically started Fire, Can construction: Dee
p drawn  &  Co.  Mig  welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 5 MM, with one Years Warranty etc.comple
te.

Providing 75 kg Fire Extinguisher Mono Ammonium Phospha 0.00 0.00

te
Powder 90, Stored Pressure Type, Pressure Gauge Gross Wei
ght 161.5  kg,  Empty  Weight  86.5  kg,  Can  Height  :  1190
MM, Diameter  400  MM,  Discharge  Time  :  less  than  60
Secs,
Controllable discharge mechanism, Range minimum 10 mete
rs, applicable  on  Class  ABC  and  electrically  started  Fire,
Can
construction: Deep drawn & Co. Mig welded, Valve construc
tion :  Forging  and  Machining,  Internal  Coating  of  Can  :
Epoxy powder  coating,  External  Coating  of  Can:  Epoxy
Polyster
powder Coating, Sheet metal Thickness: 5 MM,with one Year
s Warranty etc.complete.
Providing  5  kg  Ceiling  Mounted  Fire  Extinguisher  Mono 0.00 0.00
Ammonium  Phosphate  Powder  90,  Stored  Pressure  Type,
Pressure Gauge Gross Weight 7.7 kg, Empty Weight 2.7 kg, C
an
Height : 267 MM, Diameter 230 MM, Discharge Time : less t
han
8 Secs, , Range minimum 10 meters, applicable on Class ABC
and electrically started Fire, A Rating 21A, B Rating 89B Can
construction: Deep drawn & Co. Mig welded, Valve construc
tion :  Forging  and  Machining,  Internal  Coating  of  Can  :
Epoxy powder  coating,  External  Coating  of  Can:  Epoxy
Polyster
powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Ye
ars Warranty etc.complete.

Providing 10 kg Ceiling Mounted Fire Extinguisher Mono 0.00 0.00

Ammonium  Phosphate  Powder  90,  Stored  Pressure  Type,
Pressure Gauge Gross Weight 14.8 kg, Empty Weight 4.8 kg,
Can Height : 316 MM, Diameter 300 MM, Discharge Time : le
ss
than 10 Secs , Range minimum 10 meters, applicable on Clas
s
ABC and electrically started Fire, A Rating 21A, B Rating 89B
Can  construction:  Deep  drawn  &  Co.  Mig  welded,  Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 2.00 MM, with 5 Ye
ars Warranty etc.complete.
Providing  1  kg  Ceiling  Mountd  Fire  Extinguisher  Monnex 0.00 0.00
Powder, Stored Pressure Type, Pressure Gauge Gross Weight
2.6 kg, Empty Weight 1.6 kg, Can Height : 341 MM, Diameter
108 MM, Discharge Time : less than 9 Secs , Range minimum
4
meters, applicable on Class A,B and electrically started Fire,
B
Rating 89B, Can construction: Deep drawn & Co. Mig welded
,
Valve construction : Forging and Machining, Internal Coating
of
Can : Epoxy powder coating, External Coating of Can: Epoxy
Polyster powder Coating, Sheet metal Thickness: 1.60 MM,
with 5 Years Warranty etc.complete.

Providing 2 kg Ceiling Mountd Fire Extinguisher Monnex 0.00 0.00

Powder, Stored Pressure Type, Pressure Gauge Gross Weight
4.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter
140  MM,  Discharge  Time  :  less  than  9  Secs,  Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class A,B and electrically started Fire, Very effective on Class
B
fire,B Rating 144B, Can construction: Deep drawn & Co. Mig
welded, Valve construction : Forging and Machining, Internal
Coating of Can : Epoxy powder coating, External Coating of
Can: Epoxy Polyster powder Coating, Sheet metal Thickness:
1.60 MM, with 5 Years Warranty etc.complete.
Providing  4  kg  Ceiling  Mountd  Fire  Extinguisher  Monnex 0.00 0.00
Powder, Stored Pressure Type, Pressure Gauge Gross Weight
7.5 kg, Empty Weight 3.5 kg, Can Height : 486 MM, Diameter
160  MM,  Discharge  Time  :  less  than  15  Secs,
Controllable
discharge mechanism, Range minimum 4 meters, applicable
on
Class A,B and electrically started Fire, Very effective on Class
B
fire, Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Ye
ars Warranty etc.complete.

Providing 4 kg Fire Extinguisher for Live Metal fires, SPM TEC 0.00 0.00

powder Based Stored Pressure Type, Melting point at 600
650 degree  C,  Applicable  on  Class  D  metal  Fires  in
Magnesium, Aluminium,  Zinc,  Sodium,  Potassium,
Francium,  Lithium,
Cesium, Pressure Gauge Gross Weight 6.9 kg, Empty Weight
2.9 kg, Can Height : 435 MM, Diameter 140 MM, Discharge
Time : less than 15 Secs, Controllable discharge mechanism,
Range minimum 4 meters, Can construction: Deep drawn &
Co. Mig  welded,  Valve  construction  :  Forging  and
Machining, Internal  Coating  of  Can  :  Epoxy  powder
coating,  External
Coating of Can: Epoxy Polyster powder Coating, Sheet metal
Thickness:  1.60  MM,  EN  Approved  with  5  Years
Warranty etc.complete.
Providing 6 kg Fire Extinguisher for Live Metal fires, SPM TEC 0.00 0.00
powder Based Stored Pressure Type, Melting point at 600
650 degree  C,  Applicable  on  Class  D  metal  Fires  in
Magnesium, Aluminium,  Zinc,  Sodium,  Potassium,
Francium,  Lithium,
Cesium, Pressure Gauge Gross Weight 9.5 kg, Empty Weight
3.5 kg, Can Height : 486 MM, Diameter 160 MM, Discharge
Time : less than 16 Secs, Controllable discharge mechanism,
Range minimum 4 meters, Can construction: Deep drawn &
Co. Mig  welded,  Valve  construction  :  Forging  and
Machining, Internal  Coating  of  Can  :  Epoxy  powder
coating,  External
Coating of Can: Epoxy Polyster powder Coating, Sheet metal
Thickness:  1.60  MM,  EN  Approved  with  5  Years
Warranty etc.complete.

Providing 9 kg Fire Extinguisher for Live Metal fires, SPM TEC 0.00 0.00

powder Based Stored Pressure Type, Melting point at 600
650 degree  C,  Applicable  on  Class  D  metal  Fires  in
Magnesium, Aluminium,  Zinc,  Sodium,  Potassium,
Francium,  Lithium,
Cesium, Pressure Gauge Gross Weight 13.8 kg, Empty Weigh
t 4.8 kg, Can Height : 611 MM, Diameter 175 MM, Discharge
Time : less than 18 Secs, Controllable discharge mechanism,
Range minimum 4 meters, Can construction: Deep drawn &
Co. Mig  welded,  Valve  construction  :  Forging  and
Machining, Internal  Coating  of  Can  :  Epoxy  powder
coating,  External
Coating of Can: Epoxy Polyster powder Coating, Sheet metal
Thickness:  1.60  MM,  EN  Approved  with  5  Years
Warranty etc.complete.
Providing 4 kg Fire Extinguisher for Heavy Metal fires, SPM 0.00 0.00
TEC powder  Based  Stored  Pressure  Type,  Melting  point
at  1200 degree  C,  Applicable  on  Class  D  metal  Fires  in
Plutonium, Titanium,  lead,  Coper,  Tungsten,  Cobalt  and
Manganese,
Pressure Gauge Gross Weight 6.9 kg, Empty Weight 2.9 kg, C
an
Height : 435 MM, Diameter 140 MM, Discharge Time : less t
han
15 Secs, Controllable discharge mechanism, Range minimum
4
meters, Can construction: Deep drawn & Co. Mig welded, Va
lve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.

Providing 6 kg Fire Extinguisher for Heavy Metal fires, SPM 0.00 0.00

TEC powder  Based  Stored  Pressure  Type,  Melting  point
at  1200 degree  C,  Applicable  on  Class  D  metal  Fires  in
Plutonium, Titanium,  lead,  Coper,  Tungsten,  Cobalt  and
Manganese,
Pressure Gauge Gross Weight 9.5 kg, Empty Weight 3.5 kg, C
an
Height : 486 MM, Diameter 160 MM, Discharge Time : less t
han
16 Secs, Controllable discharge mechanism, Range minimum
4
meters, Can construction: Deep drawn & Co. Mig welded, Va
lve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.
Providing 9 kg Fire Extinguisher for Heavy Metal fires, SPM 0.00 0.00
TEC powder  Based  Stored  Pressure  Type,  Melting  point
at  1200 degree  C,  Applicable  on  Class  D  metal  Fires  in
Plutonium, Titanium,  lead,  Coper,  Tungsten,  Cobalt  and
Manganese,
Pressure Gauge Gross Weight 13.8 kg, Empty Weight 4.8 kg,
Can Height : 611 MM, Diameter 175 MM, Discharge Time : le
ss than  18  Secs,  Controllable  discharge  mechanism,
Range
minimum 4 meters, Can construction: Deep drawn & Co. Mig
welded, Valve construction : Forging and Machining, Internal
Coating of Can : Epoxy powder coating, External Coating of
Can: Epoxy Polyster powder Coating, Sheet metal Thickness:
2.00 MM, EN Approved with 5 Years Warranty etc.complete.

Providing 2 kg Fire Extinguisher Clean Agent HCFC 0.00 0.00

123, Stored Pressure  Type,  Pressure  Gauge  Gross  Weight
3.6  kg,  Empty Weight  1.6  kg,  Can  Height  341  MM,
Diameter  108  MM, Discharge  Time  less  than  6  Secs,
Controllable  discharge
mechanism, Range minimum 2 meters, applicable on Class A
BC and  electrically  started  Fire,  B  Rating  21B  Can
construction:
Deep drawn & Co. Mig welded, Valve construction : Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 2.00 MM, EN Approved with 5 Years Warra
nty etc.complete.
Providing 4 kg Fire Extinguisher Clean Agent HCFC 0.00 0.00
123, Stored
Pressure Type, Pressure Gauge Gross Weight : 6.9 kg, Empty
Weight:  2.9  kg,  Can  Height  435  MM,  Diameter  140  MM,
Discharge  Time  less  than  9  Secs,  Controllable  discharge
mechanism, Range minimum 4 meters, applicable on Class A
BC
and electrically started Fire, A Rating 5A, B Rating 34B Can
construction: Deep drawn & Co. Mig welded, Valve construc
tion :  Forging  and  Machining,  Internal  Coating  of  Can  :
Epoxy powder  coating,  External  Coating  of  Can:  Epoxy
Polyster
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.

Providing 6 kg Fire Extinguisher Clean Agent HCFC 0.00 0.00

123, Stored
Pressure Type, Pressure Gauge Gross Weight : 9.5 kg, Empty
Weight:  3.5  kg,  Can  Height  486  MM,  Diameter  160  MM,
Discharge  Time  less  than  9  Secs,  Controllable  discharge
mechanism, Range minimum 4 meters, applicable on Class A
BC
and electrically started Fire, A Rating 5A, B Rating 34B Can
construction: Deep drawn & Co. Mig welded, Valve construc
tion :  Forging  and  Machining,  Internal  Coating  of  Can  :
Epoxy powder  coating,  External  Coating  of  Can:  Epoxy
Polyster
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.
Providing 5 kg Fire Extinguisher Clean Agent HCFC 0.00 0.00
123, Stored
Pressure Type, Pressure Gauge Gross Weight :7.7 kg, Empty
Weight  2.7  kg,  Can  Height  :267  MM,  Diameter  230  MM,
Discharge Time less than 8 Secs, Auto discharge mechanism,
on
temperature rise, applicable on Class ABC and electrically sta
rted
Fire, Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.

Providing 10 kg Fire Extinguisher Clean Agent HCFC 0.00 0.00

123, Stored
Pressure Type, Pressure Gauge Gross Weight :14.8 kg, Empty
Weight : 4.8 kg, Can Height :316 MM, Diameter : 300 MM,
Discharge Time less than 10 Secs, Auto discharge mechanism
,
on temperature rise, applicable on Class ABC and electrically
started Fire, Can construction: Deep drawn & Co. Mig welde
d,
Valve construction : Forging and Machining, Internal Coating
of
Can : Epoxy powder coating, External Coating of Can: Epoxy
Polyster powder Coating, Sheet metal Thickness: 2.00 MM, E
N Approved with 5 Years Warranty etc.complete.
Providing 2 kg Fire Extinguisher Clean Agent HFC 236, Zero 0.00 0.00
ODP, Stored Pressure Type, Pressure Gauge Gross Weight :3.
6 kg, Empty Weight : 1.6 kg, Can Height :341 MM, Diameter :
108  MM,  Discharge  Time  less  than  6  Secs,  Controllable
discharge mechanism, Range Minimum 2 meters, applicable
on Class  ABC  and  electrically  started  Fire  B  Rating  21B,
Can
construction: Deep drawn & Co. Mig welded, Valve construc
tion :  Forging  and  Machining,  Internal  Coating  of  Can  :
Epoxy powder  coating,  External  Coating  of  Can:  Epoxy
Polyster
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.

Providing 4 kg Fire Extinguisher Clean Agent HFC 236, Zero 0.00 0.00

ODP, Stored Pressure Type, Pressure Gauge Gross Weight :6.
9 kg, Empty Weight : 2.9 kg, Can Height :435 MM, Diameter :
140  MM,  Discharge  Time  less  than  9  Secs,  Controllable
discharge mechanism, Range Minimum 4 meters, applicable
on
Class ABC and electrically started Fire A Rating 5A, B Rating 3
4B, Can  construction:  Deep  drawn  &  Co.  Mig  welded,
Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.
Providing 6 kg Fire Extinguisher Clean Agent HFC 236, Zero 0.00 0.00
ODP, Stored Pressure Type, Pressure Gauge Gross Weight : 9.
5 kg, Empty Weight : 3.5 kg, Can Height :486 MM, Diameter :
160  MM,  Discharge  Time  less  than  9  Secs,  Controllable
discharge mechanism, Range Minimum 4 meters, applicable
on
Class ABC and electrically started Fire A Rating 5A, B Rating 3
4B, Can  construction:  Deep  drawn  &  Co.  Mig  welded,
Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy powder coating, External Coating of Can: Epoxy Polyst
er
powder Coating, Sheet metal Thickness: 1.60 MM, EN Appro
ved with 5 Years Warranty etc.complete.

Providing 9 kg Fire Extinguisher Clean Agent HFC 236, Zero 0.00 0.00

ODP, Stored Pressure Type, Pressure Gauge Gross Weight : 1
3.8
kg, Empty Weight : 4.8 kg, Can Height : 611 MM, Diameter :
175  MM,  Discharge  Time  Minimum  12  Secs,  Controllable
discharge mechanism, Range Minimum 4 meters, applicable
on
Class ABC and electrically started Fire, Can construction: Dee
p drawn  &  Co.  Mig  welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 1.60 MM, EN Approved with 5 Years Warra
nty etc.complete.
Providing 5 kg Ceiling Mounted Fire Extinguisher Clean Agen 0.00 0.00
t HFC  236,  Zero  ODP,  Stored  Pressure  Type,  Pressure
Gauge
Gross Weight : 7.7 kg, Empty Weight : 2.7 kg, Can Height :
267 MM, Diameter : 230 MM, Discharge Time Minimum 8 Se
cs,
Auto discharge mechanism, On temperature rise, applicable
on
Class ABC and electrically started Fire, Can construction: Dee
p drawn  &  Co.  Mig  welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 1.60 MM, EN Approved with 5 Years Warra
nty etc.complete.

Providing 10 kg Ceiling Mounted Fire Extinguisher Clean Age 0.00 0.00

nt HFC  236,  Zero  ODP,  Stored  Pressure  Type,  Pressure
Gauge
Gross Weight : 14.8 kg, Empty Weight : 4.8 kg, Can Height :
316 MM, Diameter : 300 MM, Discharge Time Minimum 8 Se
cs,
Auto discharge mechanism, On temperature rise, applicable
on
Class ABC and electrically started Fire, Can construction: Dee
p drawn  &  Co.  Mig  welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, She
et
metal Thickness: 1.60 MM, EN Approved with 5 Years Warra
nty etc.complete.
Providing 2 kg CO2 Gas Type Fire Extinguisher, Use Unused 0.00 0.00
Mechanism Squeeze Grip, Gross Weight : 9.1 kg, Empty Weig
ht : 7.1 kg, Can Height : 600 MM, Diameter 108 MM, Dischar
ge
Time : less than 8 Secs, Controllable discharge mechanism, ,
applicable on Class B&C fire , B Rating 13B Can construction:
Hot  Spinning,  Valve  construction  :  Forging  and
Machining,
Internal Coating of Can : Not Applicable, External Coating of
Can:  Spray  Painting,,  Sheet  metal  Thickness:  4.0  MM,  ISI
Approved with 1 Year Warranty etc.complete.

Providing 4.5 kg CO2 Gas Type Fire Extinguisher, Trolley 0.00 0.00

Mounted,  Easy  Weight  Management  Use  Unused
Mechanism
Squeeze Grip, Gross Weight : 19.1 kg, Empty Weight : 14.6 kg
,
Can Height : 857 MM, Diameter 140 MM, Discharge Time : le
ss
than 10 Secs, Controllable discharge mechanism, , applicable
on  Class  B&C  fire  ,  B  Rating  21B  Can  construction:  Hot
Spinning, Valve construction : Forging and Machining, Intern
al
Coating of Can : Not Applicable, External Coating of Can: Spr
ay
Painting,, Sheet metal Thickness: 4.5 MM, ISI Approved with
1 Year Warranty etc.complete.
Providing  4.5  kg  CO2  Gas  Type  Fire  Extinguisher,  Trolley 0.00 0.00
Mounted,  Easy  Weight  Management  Use  Unused
Mechanism
Squeeze Grip, Gross Weight : 19.1 kg, Empty Weight : 14.6 kg
,
Can Height : 857 MM, Diameter 140 MM, Discharge Time : le
ss
than 10 Secs, Controllable discharge mechanism, , applicable
on  Class  B&C  fire  ,  B  Rating  21B  Can  construction:  Hot
Spinning, Valve construction : Forging and Machining, Intern
al
Coating of Can : Not Applicable, External Coating of Can: Spr
ay
Painting,, Sheet metal Thickness: 4.5 MM, ISI Approved with
1 Year Warranty etc.complete.

Providing 6.5 kg CO2 Gas Type Fire Extinguisher, Trolley 0.00 0.00

Mounted,  Easy  Weight  Management  Use  Unused
Mechanism
Squeeze Grip, Gross Weight : 30.5 kg, Empty Weight : 24 kg,
Can Height : 1000 MM, Diameter 140 MM, Discharge Time : l
ess
than 10 Secs, Controllable discharge mechanism, , applicable
on  Class  B&C  fire  ,  B  Rating  34  B  Can  construction:  Hot
Spinning, Valve construction : Forging and Machining, Intern
al
Coating of Can : Not Applicable, External Coating of Can: Spr
ay
Painting,, Sheet metal Thickness: 4.5 MM, ISI Approved with
1 Year Warranty etc.complete.
Providing  22.5  kg  CO2  Gas  Type  Fire  Extinguisher,  Trolley 0.00 0.00
Mounted, Squeeze Grip, Gross Weight : 93.5 kg, Empty Weig
ht : 71 kg, Can Height : 1333 MM, Diameter 232 MM, Dischar
ge
Time : less than 20 Secs, Controllable discharge mechanism,
,applicable on Class B&C fire , Can construction: Hot Spinnin
g,
Valve construction : Forging and Machining, Internal Coating
of
Can : Not Applicable, External Coating of Can: Spray Painting
,, Sheet  metal  Thickness:  4.5  MM,  ISI  Approved  with  1
Year Warranty etc.complete.

Providing 2 kg CO2 Gas Type Fire Extinguisher, Use Unused 0.00 0.00

Mechanism  Squeeze  Grip,  Gross  Weight  :  5.16  kg,  Empty
Weight : 3.16 kg, Can Height : 372 MM, Diameter 232 MM,
Discharge  Time  :  less  than  8  Secs,  Controllable  discharge
mechanism, , applicable on Class B&C fire, B Rating 13B, Can
construction:  Cold  Impact  Extrusion,  Valve  construction  :
Forging  and  Machining,  Internal  Coating  of  Can  :  Not
Applicable, External Coating of Can: Spray Painting, Aluminiu
m
metal ISO & PESO Approved with 1 Year Warranty etc.compl
ete.
Providing  4.5  kg  CO2  Gas  Type  Fire  Extinguisher,  Trolley 0.00 0.00
Mounted  Easy  Weight  Management,  Use  Unused
Mechanism
Squeeze Grip, Gross Weight : 11.6 kg, Empty Weight : 6.66 kg
,
Can Height : 651 MM, Diameter 140 MM, Discharge Time : le
ss
than 10 Secs, Controllable discharge mechanism, applicable
on
Class B&C fire, B Rating 21B, Can construction: Cold Impact
Extrusion,Valve construction : Forging and Machining, Intern
al
Coating of Can : Not Applicable, External Coating of Can: Spr
ay
Painting,, Aluminium metal ISO & PESO Approved with 1 Yea
r Warranty etc.complete.

Providing 9 Liters Fire Extinguisher,AFFF Foam Type, 0.00 0.00

Stroed
Pressure Type Pressure Gauge,Gross Weight : 14.6 kg, Empty
Weight : 5.6 kg, Can Height : 611 MM, Diameter 175 MM,
Discharge  Time  :  less  than  60  Secs,  Controllable
discharge
mechanism, , Range minimum 6 meters, Applicable on Class
A &
B fire, A Rating 13A, B Rating 55B, Can construction: Deep
drawn  &  co.,Mig  Welded,  Valve  construction  :  Forging
and
Machining, Internal Coating of Can : Epoxy Powder Coating,
External Coating of Can: Epoxy Polyster Powder coating Shee
t Metal Thickness: 2.0 MM ISI and EN Approved, with 1 Year
Warranty etc.complete.
Providing 50 Liters Fire Extinguisher,AFFF Foam Type,Externa 0.00 0.00
l
Cartridge Type Pressure Gauge Gross Weight : 102 kg, Empty
Weight : 52 kg, Can Height : 1192 MM, Diameter 300 MM,
Discharge  Time  :  less  than  180  Secs,  Controllable
discharge
mechanism, , Range minimum 10 meters, Applicable on Clas
s A
& B fire, Can construction: Deep drawn & Co2.,Mig Welded,
Valve construction : Forging and Machining, Internal Coating
of
Can : Epoxy Powder Coating, External Coating of Can: Epoxy
Polyster Powder coating Sheet Metal Thickness: 4.0 MM wit
h 1 Year Warranty etc.complete.

Providing 9 Liters Fire Extinguisher,Water Type, Stroed Press 0.00 0.00

ure
Type Pressure Gauge Gross Weight : 14.6 kg, Empty Weight :
5.6 kg, Can Height : 611 MM, Diameter 175 MM, Discharge
Time : less than 120 Secs, Controllable discharge mechanism
, ,
Range minimum 6 meters, Applicable on Class A fire, A Ratin
g
13A, Can construction: Deep drawn & co.,Mig Welded, Valve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy Powder Coating, External Coating of Can: Epoxy Polyst
er Powder  coating  Sheet  Metal  Thickness:  2.0  MM  ISI
and  EN Approved, with 1 Year Warranty etc.complete.
Providing  50  Liters  Fire  Extinguisher,Water  Type,External 0.00 0.00
Cartridge Type Pressure Gauge,Gross Weight : 102 kg, Empty
Weight : 52 kg, Can Height : 1192 MM, Diameter 300 MM,
Discharge  Time  :  less  than  180  Secs,  Controllable
discharge
mechanism, Range minimum 10 meters, Applicable on Class
A &
B fire, Can construction: Deep drawn & Co2.,Mig Welded, Va
lve
construction : Forging and Machining, Internal Coating of Ca
n :
Epoxy Powder Coating, External Coating of Can: Epoxy Polyst
er
Powder coating Sheet Metal Thickness: 4.0 MM with 1 Year
Warranty etc.complete.

Providing Water Mist 9 liters Fire Extinguisher Gross 0.00 0.00

Weight:23.9  kg  Weight  of  the  Empty  fire  fighting  system
without compressed air bottle and bottle value 13.7 kg. Can
Hight: 611 MM, Diameter: 175 MM, Weight of the Gun: 1.0 k
g, Nominal charg 9 liter recoil
approx. 10 N extinguishing Media Flow
0.23/ sec, Water Discharge Hose 13 MM, Compressed air
to Gun
10MM, applicable on Class A,B & electrically started Fire, A
Rating  55A,  B  Rating  233B,  Compressed  Air  Bottle
(volume/*pressure)2L/300 bar, Operating Range Approx 12.
0 M ,Opreation  Time  approx  40  Sec.  Extinguishing
ehnancement agentf oam  additive,  EN  and  ERDA
approved  Sheet  Metal Thickness  (  SS  316  Ti) 1.5  MM
with  1  year  Warranty etc.complete.
Providing Water Mist 50 liters Fire Extinguisher Gross Weight 0.00 0.00
:92 kg  Weight  of  the  Empty  fire  fighting  system  without
compressed air bottle and bottle value 42 kg. Can Hight: 119
2
MM, Diameter: 300 MM, Weight of the Gun: 1.0 kg, Nominal
charg 50 liter recoil
approx. 10 N extinguishing Media Flow0.31/  sec,  Water
Discharge  Hose 13  MM,  Compressed  air  to Gun
10MM, applicable on Class A,B & electrically started Fire, A
Rating  55A,  B  Rating  233B,  Compressed  Air  Bottle
(volume/*pressure)6L/300 bar, Operating pressure (dynamic
)approx, 5.0 bar ,Opreation Time approx 160 Sec. Extinguishi
ng ehnancement  agentf oam  additive,  EN  and  ERDA
approved Sheet Metal Thickness ( SS 316 Ti)
2 MM with 1 year Warranty etc.complete.

Fire Safety 45.48 FIRE 0.00 0.00

Providing Carbon Composite Cylinder 2 kg (For 9 liters Water
Mist Extinguisher) Without Gas Filling etc.complete.

Fire Safety 45.49 FIRE Providing Mild Steel Cylinder 6 kg 0.00 0.00

(For  50  ltrs  Water  Mist
Extinguisher) Without Gas Filling etc.complete.
Providing QRS:2 Kg  Direct Low Pressure System Gross Weight 0.00 0.00
3.98 kg Empty Weight :1.98 Can Height : 333 MM, Diameter
108 MM, Can construction: Deep drawn , Valve construction
: Forging  and  Machining,External  Construction:  Epoxy
powder
Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
NAF  S  125,  zero  ODP,  Stored  Pressure  Fitted  With
pressure
Gauge, Control Panel having Monitoring LED's for AC Power
System On , Discharged, valve Closed, Valve Open, Pressure
Healthy LED Red . Strobe Amber for Fire , OLED Graphic Displ
ay 95  X  16,  Battery  Backup,  3  Outpus  Using  Potential
Free
Relaycontact,Audio Output using Piezo buzzer, 4 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  i
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachment  6  Pc
etc.complete.
Providing QRS:4 Kg  Direct Low Pressure System 0.00 0.00
Gross Weight 7
kg Empty Weight :3 Kg Can Height : 413 MM, Diameter 140
MM,  Can  construction:  Deep  drawn  ,  Valve
construction  : Forging  and  Machining,External
Construction:  Epoxy  powder
Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
NAF  S  125,  zero  ODP,  Stored  Pressure  Fitted  With
pressure
Gauge, Control Panel having Monitoring LED's for AC Power
System On , Discharged, valve Closed, Valve Open, Pressure
Healthy Strobe Red Strobe Amber, OLED Graphic Display 95
X 16,  Battery  Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio Output using Piezo buzzer, 4 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  i
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachment  8  Pc
etc.complete.
Providing QRS:6 Kg  Direct Low Pressure System Gross Weight 0.00 0.00
9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, Diamet
er
160 MM, Can construction: Deep drawn , Valve construction
: Forging  and  Machining,External  Construction:  Epoxy
powder
Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
NAF  S  125,  zero  ODP,  Stored  Pressure  Fitted  With
pressure
Gauge, Control Panel having Monitoring LED's for AC Power
System On , Discharged, valve Closed, Valve Open, Pressure
Healthy Strobe Red Strobe Amber, OLED Graphic Display 95
X 16,  Battery  Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio Output using Piezo buzzer, 5 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  i
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  10  Pc
etc.complete.
Providing  QRS:  9  Kg   Direct  Low  Pressure  System Gross 0.00 0.00
Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 M
M, Diameter  175  MM,  Can  construction:  Deep  drawn  ,
Valve construction  :  Forging  and  Machining,External
Construction:
Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 y
ear Warranty  Valve  :  Nickel  Plated,  With  Integrated  Ball
Valve, Integrated  Position  Control  for  ball  valve  open
close, Extinguishing  Clean  Agent  NAF  S  125,  zero  ODP,
Stored Pressure  Fitted  With  pressure  Gauge,  Control
Panel  having
Monitoring LED's for AC Power System On , Discharged, valv
e
Closed, Valve Open, Pressure Healthy Strobe Red Strobe Am
ber,
OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Usi
ng
Potential Free Relaycontact,Audio Output using Piezo buzzer,
5
meter Sensor tube UV Resistance with Pressurization of Tub
e
easing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapt
er
i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure
Switch M 10X1, Switchpoint 15 Bar
1Pc Tube Attachemnt 10 Pc etc.complete.
Providing QRS:2 Kg  Direct Low Pressure System Gross Weight 0.00 0.00
3.98 kg Empty Weight :1.98 Can Height : 333 MM, Diameter
108 MM, Can construction: Deep drawn , Valve construction
: Forging  and  Machining,External  Construction:  Epoxy
powder
Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
HCFC
123, Stored Pressure Fitted With pressure Gauge, Control
Panel  having  Monitoring  LED's  for  AC  Power  System
On  ,
Discharged, valve Closed, Valve Open, Pressure Healthy Stro
be Red  Strobe  Amber,  OLED  Graphic  Display  95  X  16,
Battery Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio
Output using Piezo buzzer, 3 meter Sensor tube UV Resistanc
e
with Pressurization of Tube easing Nitrogen Gas, End of Line
Plug  1  Pc,  End  of  Line  adapter  i  Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  6  Pc
etc.complete.
Providing QRS:4 Kg  Direct Low Pressure System 0.00 0.00
Gross Weight 7
kg Empty Weight :3 Kg Can Height : 413 MM, Diameter 140
MM,  Can  construction:  Deep  drawn  ,  Valve
construction  : Forging  and  Machining,External
Construction:  Epoxy  powder
Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
HCFC
123, Stored Pressure Fitted With pressure Gauge, Control
Panel  having  Monitoring  LED's  for  AC  Power  System
On  ,
Discharged, valve Closed, Valve Open, Pressure Healthy Stro
be Red  Strobe  Amber,  OLED  Graphic  Display  95  X  16,
Battery Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio
Output using Piezo buzzer, 4 meter Sensor tube UV Resistanc
e
with Pressurization of Tube easing Nitrogen Gas, End of Line
Plug  1  Pc,  End  of  Line  adapter  i  Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  8  Pc
etc.complete.
Providing QRS:6 Kg  Direct Low Pressure System Gross Weight 0.00 0.00
9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, Diamet
er
160 MM, Can construction: Deep drawn , Valve construction
: Forging  and  Machining,External  Construction:  Epoxy
powder
Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty V
alve : Nickel Plated, With Integrated Ball Valve, Integrated Po
sition
Control for ball valve open close, Extinguishing Clean Agent
HCFC
123, Stored Pressure Fitted With pressure Gauge, Control
Panel  having  Monitoring  LED's  for  AC  Power  System
On  ,
Discharged, valve Closed, Valve Open, Pressure Healthy Stro
be Red  Strobe  Amber,  OLED  Graphic  Display  95  X  16,
Battery Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio
Output using Piezo buzzer, 5 meter Sensor tube UV Resistanc
e
with Pressurization of Tube easing Nitrogen Gas, End of Line
Plug  1  Pc,  End  of  Line  adapter  i  Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  10  Pc
etc.complete.
Providing  QRS:  9  Kg   Direct  Low  Pressure  System Gross 0.00 0.00
Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 M
M, Diameter  175  MM,  Can  construction:  Deep  drawn  ,
Valve construction  :  Forging  and  Machining,External
Construction:
Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 y
ear Warranty  Valve  :  Nickel  Plated,  With  Integrated  Ball
Valve, Integrated  Position  Control  for  ball  valve  open
close, Extinguishing  Clean  Agent  HCFC 123,  Stored
Pressure  Fitted
With pressure Gauge, Control Panel having Monitoring LED's
for
AC Power System On , Discharged, valve Closed, Valve Open,
Pressure  Healthy  Strobe  Red  Strobe  Amber,  OLED
Graphic
Display 95 X 16, Battery Backup, 3 Outpus Using Potential Fr
ee
Relaycontact,Audio Output using Piezo buzzer, 5 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  i
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  12  Pc
etc.complete.
Providing QRS:2 Kg  Direct Low Pressure System Gross Weight 0.00 0.00
8.52 kg Empty Weight :6.52 Can Height : 595 MM, Diameter
108 MM, Can construction: Hot Spinning/Heat Treatment, V
alve construction  :  Forging  and  Machining,External
Construction:
Epoxy powder Coating, Sheet Metal Thickness: 4.2 MM 1 ye
ar
Warranty Valve : Brass,Cylinder thread: 25 E Dip thread M10
X1, OutLet  Thread:  W21  X  8X1/14''  Bursting  Disc:  250
bar  ,
Integrated Position Control for valve open close, Extinguishin
g
Agent Co2 Controle Panel having,Monitoring LED's for AC Po
wer
System On , Discharged, valve Closed, Valve Open, Pressure
Healthy Strobe Red Strobe Amber, OLED Graphic Display 95
X 16,  Battery  Backup,  3  Outpus  Using  Potential  Free
Relaycontact,Audio Output using Piezo buzzer, 3 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  1
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  6  Pc
etc.complete.
Providing QRS:4.5 Kg  Direct Low Pressure System 0.00 0.00
Gross Weight
14.73 kg Empty Weight : 13.23 Can Height : 735 MM, Diamet
er
139 MM, Can construction: Hot Spinning/Heat Treatment, V
alve construction  :  Forging  and  Machining,External
Construction:
Epoxy powder Coating, Sheet Metal Thickness: 3.5 MM 1 ye
ar
Warranty Valve : Brass,Cylinder thread: 25E Dip Tube Thread
ing
M10 X1, OutLet Thread: W21 X 8X1/14'' Bursting Disc: 250 b
ar , Integrated Position Control for valve open close, Extingui
shing Agent  Co2  Controle  Panel  having,  Monitoring  LED's
for  AC Power  System  On  ,  Discharged,  valve  Closed,
Valve  Open, Pressure  Healthy  Strobe  Red  Strobe  Amber,
OLED  Graphic
Display 95 X 16, Battery Backup, 3 Outpus Using Potential Fr
ee
Relaycontact,Audio Output using Piezo buzzer, 3 meter Sens
or
tube UV Resistance with Pressurization of Tube easing Nitrog
en Gas,  End  of  Line  Plug  1  Pc,  End  of  Line  adapter  1
Pc,  T
Connection/Elbow/Straight Connection 1 Pc. Pressure Switc
h M 10X1,  Switchpoint  15  Bar 1Pc  Tube  Attachemnt  8  Pc
etc.complete.
Providing QRS:6.5 Kg  Direct Low Pressure System 0.00 0.00
Gross Weight
23.2 kg Empty Weight : 16.7 Can Height : 980 MM, Diameter
139.7  MM,  Can  construction:  Hot  Spinning/Heat
Treatment, Valve  construction  :  Forging  and
Machining,External
Construction: Epoxy powder Coating, Sheet Metal Thickness:
4.5 MM 1 year Warranty Valve : Brass,Cylinder thread: 25E D
ip Tube  Threading  M10  X1,  OutLet  Thread:  W21  X
8X1/14''
Bursting Disc: 250 bar , Integrated Position Control for valve
open close, Extinguishing Agent Co2 Controle Panel having,
Monitoring LED's for AC Power System On , Discharged, valv
e
Closed, Valve Open, Pressure Healthy Strobe Red Strobe Am
ber,
OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Usi
ng
Potential Free Relaycontact,Audio Output using Piezo buzzer,
3
meter Sensor tube UV Resistance with Pressurization of Tub
e
easing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapt
er
1 Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure
Switch M 10X1, Switchpoint 15 Bar
1Pc Tube Attachemnt 10 Pc etc.complete.
Providing  QRS:22.5  Kg   Direct  Low  Pressure  System Gross 0.00 0.00
Weight 63.6 kg Empty Weight : 41.1 Can Height : 1170 MM,
Diameter  232  MM,  Can  construction:  Hot  Spinning/Heat
Treatment, Valve construction : Forging and Machining,Exter
nal
Construction: Epoxy powder Coating, Sheet Metal Thickness:
4.5 MM 1 year Warranty Valve : Brass,Cylinder thread: 25E D
ip Tube  Threading  M10  X1,  OutLet  Thread:  W21  X
8X1/14''
Bursting Disc: 250 bar , Integrated Position Control for valve
open close, Extinguishing Agent  Co2  Controle  Panel
having,
Monitoring LED's for AC Power System On , Discharged, valv
e
Closed, Valve Open, Pressure Healthy Strobe Red Strobe Am
ber,
OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Usi
ng
Potential Free Relaycontact,Audio Output using Piezo buzzer,
3
meter Sensor tube UV Resistance with Pressurization of Tub
e
easing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapt
er
1 Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure
Switch M 10X1, Switchpoint 15 Bar
1Pc Tube Attachemnt 12 Pc etc.complete.

Providing Escape Singage: Photoluminescent rigid plastic, 2 0.00 0.00

MM thickness,  printed  on  high  quality  glass  paint  with
UV resistance,  5  years  warranty  material  Used Non
Radiocactive, non
phosphorous, non toxic and lead free available in different
types & sizes, time after removing the light source (in minut
es): 60  minutes,  Luminescent  Intensity  (Milicandelas*per
square meter mcd/sqm):30  mcd/sqm.  luminescent
intensity  greater
than 0.32 mcd/sqm, period of Light Decay*(in Minutes):310
0 etc.complete.
Providing Escape Gear, Mild Steel Box size 425MM X 360 M 0.00 0.00
M X
140 MM, Epoxy powder coated to protect it from weatherin
g, smoke  hood  Tested  to  European  Standard  UN
403:1993 S Known  to  reduce  Carbon  monoxide,  propenal
(acrolein)
hydrogen choloride, hydrogen cyanide and solid & liquid toxi
c particles  to  manageable  level  for  at  least  15  minutes,
shall withstand  temperatures  upto  80  Dug,  Single  use
only,  Fire Blanket:  Size  1.2  M  X  1.8  M,  used  to  cover
any  vessel
containing the fire completely, Used to extinuish a clothing fi
re wrap blanket around victim etc.complete.

Removing double country tiled roof with ridge and with batt 0.00 0.00

ens
and stacking the materials as directed with all leads and lifts,
complete including removing wood work below etc. complet
e.

Removing planking from roof or ceiling and stacking them as 0.00 0.00

directed with all leads and lifts etc. complete.
Removing Queen Post truss from roof and stacking the mate 0.00 0.00
rials as directed with all leads and lifts etc. complete.

Removing King Post truss from roof and stacking the materia 0.00 0.00

ls as directed with all leads and lifts etc. complete.

Removing Other type truss below 5 metres span from roof a 0.00 0.00

nd
stacking the materials as directed with all leads and lifts etc.
complete.

Dismantling flat wooden or A.C. sheet ceiling with frame wo 0.00 0.00

rk
including stacking the materials as directed with all leads, lift
s etc. complete.

Removing cloth ceiling including frame work and stacking th 0.00 0.00

e materials as directed with all leads, lifts etc. complete.

0.00 0.00
Dismantling brick masonry in Mud and stacking the material
s as directed with all leads lifts etc. complete.

Dismantling brick masonry in lime or cement mortar 0.00 0.00

and stacking  the  materials  as  directed  with  all  leads,
lifts  etc. complete.
Dismantling  stone  masonry  in  mud  including  stacking   0.00 0.00
the materials as directed with all leads, lifts etc. complete.

Dismantling stone masonry in lime or cement mortar includi 0.00 0.00

ng stacking the materials as directed with all leads, lifts
etc. complete.

0.00 0.00
Removing lime or lean cement concrete including stacking th
e spoils as directed with all leads, lifts etc. complete.

Removing rich mix cement concrete including stacking 0.00 0.00

the spoils as directed with all leads, lifts etc. complete.

Removing brick bat coba including stacking the spoils as 0.00 0.00

directed with all leads, lifts etc. complete.
Removing doors and windows with frames and stacking 0.00 0.00
the materials as directed with all leads, lifts etc. complete.

Removing ventilators and small windows with frame 0.00 0.00

and stacking the materials with all leads lifts etc. complete.

0.00 0.00
Removing wooden or A.C. partition including frame work an
d stack ing the materials as with all leads, lifts etc. complete.

0.00 0.00
Removing teak wood trellies work with frame including stac
king
the materials as directed with all leads, lifts etc. complete.

Removing cement tiles, or marble or polished shahabad floo 0.00 0.00

r or
dado without bed concrete including stacking the materials
as directed with all leads, lifts etc. complete.

Removing Shahabad or Tabdur stones from floor without be 0.00 0.00

d
concrete including stacking the materials as directed with all
leads, lifts etc. complete.

0.00 0.00
Dismantling wooden floor including beams and joists, stacki
ng
the materials as directed with all leads, lifts etc. complete.
Removing cement or lime plaster including disposing of 0.00 0.00
the spoils as directed with all leads, lifts etc. complete.

Removing mud plaster including disposing of the spoils 0.00 0.00

as direct ed with all leads, lifts etc. complete.
Removing wire fencing with wooden post and stacking 0.00 0.00
the material with all leads, lifts etc. complete.

Removing wire fencing with iron/C.C. fencing posts and 0.00 0.00

stacking the materials as directed with all leads, lifts
etc. complete.

0.00 0.00
Removing iron pipe railing having wooden R.C.C. or C.C. or ir
on
posts and stacking the materials as directed etc. complete.

Removing earthen, stoneware pipes and stacking them 0.00 0.00

as directed with all leads, lifts etc. complete.
0.00 0.00
Removing cast iron or wrought iron or A.C. pipe and stacking
them as directed with all leads, lifts etc. complete.

Dismantling the R.C.C. work 1:2:4 and sorting out the materi 0.00 0.00

als
such as steel etc. as directed and stacking them within the
specified lead as directed etc. complete.

Removing Np 2 and Np 0.00 0.00

3 class pipes including stacking at road
side as directed by the Engineer in charge. Upto 900mm dia.
etc. complete.

Removing Np 2 and Np 0.00 0.00

3 class pipes including stacking at road
side as directed by the Engineer in charge. 900mm dia. and
above. etc. complete.

0.00 0.00
Removing single country tiled roof with battens and stacking
the materials as directed with all leads and lifts etc. complet
e.

0.00 0.00
Removing battens from roof and stacking them as directed w
ith all leads and lifts etc. complete.

0.00 0.00
Removing matting from roof and stacking as directed with al
l leads and lifts etc. complete.
0.00 0.00
Removing purlins from roof including stacking as directed wi
th all leads, lifts, etc. complete.

0.00 0.00
Removing rafters from roof including the materials as directe
d with all leads, lifts, etc. complete.

Removing cloth partition with frame work and stacking 0.00 0.00

the materials as directed with all leads, lifts etc. complete.

Providing and fixing Jute Kanthan (Tarat) screen to the 0.00 0.00

scaffold
ing for external guniting as directed including removing
the same after the work is over etc. complete.

Providing and erecting chain link fencing 1.6 M. height with 0.00 0.00

G.I. chain link of size 50 x 50 mm 8 guage thick and fixed 75
mm above Ground level on vertical M.S Angle of 40 x 40 x 6
mm size including excavating pits for foundation and embed
ded
in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75
M.c/c with iron bar 16 mm dia as hold fast including welding
link with angle frame at 30 cm c/c with nuts and bolts and
horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm
size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizont
al
including cross support of 40 x 40 x 6 mm Angles both sides
at
every corner or bends embedded in concrete blocks of 1:4:8
of
size 450 x 450 x 670 mm including 3 coats of oil painting etc.
complete.

Removing Urinal Pans or Wash hand basin with frame includ 0.00 0.00

ing disconnecting  the  sanitary  and  water  supply
connections. removing  the  same  carefully  and  stacking
the  serviceable materials  as  and  where  directed
including  throwing  the
unserviceable materials out side etc. complete.
Removing W.C. Pan including disconnecting the sanitary and 0.00 0.00
water supply connections, removing and breaking flooring a
nd bed  con crete  around  pan  removing  the  same
carefully  and stacking  the  service able  materials  as  and
where  directed including throwing  the  unserviceable
materials  out  side  etc. complete.

Dismantling existing brick bat coba in the W/C and 0.00 0.00

toilets
including removing the dismantelled stuff outside the rooms
, including stacking and cleaning surface etc. complete.

Removing Manglore tiled roof and ridge tiles with battens, ri 0.00 0.00

dge and barge boards, eaves 8 A boards etc. and
stacking the
materials as directed with all leads and lifts complete. Includ
ing removing wood work below etc. complete.

Providing and erecting 1.5 metre high wire fencing with seve 0.00 0.00

n
rows of barbed wire supported on M.S. Angles (50 mm x 50
mm x 6mm) at 2.5 Metres, centre to centre including
excavating pits for foundation, fixing post in cement concret
e of size 45 x 45 x 45 cm., fastening the wire and painting the
M.S. Angles with one coat of red lead primer and two coats
of painting etc. complete.

Providing and Erecting 1.5 Metre high wire fencing with seve 0.00 0.00

n
rows of barbed wire supported on precast poles of specified
size
at 2.5 M. C / C including excavating pits for foundation, fixin
g
posts in cement concrete 1:4:8 block of concrete of size 45 x
45 x 45 cm. fastening the wire and coal tarring wooden post
in two coats etc. complete.

Providing and fixing trap/ granite/ quartzite/ gneiss 0.00 0.00

guard
stone/ indicator stones/ boundary stones of standard size an
d shape  including  fixing  in  block  of  standard  size  of
cement concrete 1:4:8 white washing etc.complete
Providing  and  fixing  trap  /granite/  quartzite/  gneiss/   0.00 0.00
guard stone/  indicator  stones/  boundry  stones  of
standard  size  & shape  including  fixing  In  ground  and
white  washing  etc. complete

Providing and fixing M 0.00 0.00

15 R.C.C. guard stone/ indicator stones/
boundary stones of standard size and shape including fixing i
n C.C. 1:4:8 and white washing etc. complete.

Providing and fixing R.C.C. 200 metre stones as per 0.00 0.00

I.R.C. standard including fixing in standard size C.C.1:4:8
block including curing, painting lettering etc. complete.

Providing & fixing R.C.C. 1:2:4 ordinary km. stones including 0.00 0.00

painting numbering etc. complete for N.H./ S.H./ M.D.R. etc.
as
per IRC design for highway km stone and fixing in standard si
ze C.C. 1:4:8 block etc. complete.

Providing and fixing R.C.C. 5th Km. stones, on N.H./ S.H./ 0.00 0.00

M.D.R. etc. including painting, numbering etc complete as pe
r
IRC design for highway km. stones and fixing in standard size
c.c. 1:4:8 block complete.

Dismantling of 5th KM Stone including cutting of earth, 0.00 0.00

foundation and disposal of dismantled material with all lifts
and lead upto 1000 m and back filling of pit.

Dismantling of Ordinary KM Stone including cutting of earth, 0.00 0.00

foundation and disposal of dismantled material with all lifts
and lead upto 1000 m and back filling of pit.

Dismantling of Hectometer Stone including cutting of 0.00 0.00

earth,
foundation and disposal of dismantled material with all lifts
and lead upto 1000 m and back filling of pit.

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering for two hundred metre stone
etc. complete.

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering for ordinary kilometre stone et
c. complete.
Painting with approved enamel paint in two coats including 0.00 0.00
cleaning surface and lettering for fifth k.m. stone etc. comple
te. MORTH 805.1 Number 115 63

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering for boundary stones etc.
complete.

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering for cautionary/ mandatory sig
n boards and village name boards etc. complete.

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering for informatory sign boards et
c. complete.

Painting with approved enamel paint in two coats including 0.00 0.00

cleaning surface and lettering on masonry works with nalla
flow direction, span number and location etc. complete.

Painting letters upto 20 cm height complete brushes, 0.00 0.00

coir brushers, dusting, cleaning, including cost of paint
etc. complete.

Painting and numbering trees with white background and bl 0.00 0.00

ack lettering etc. complete. MORTH 801 Number 11 4

Providing white & colour washing to road side trees in 2 coat 0.00 0.00

s
in 2 bands of white and one red band at centre of 30 cm heig
ht each including preparing the surface, cost of material,
conveying etc. complete.

Painting Line, Dashes, Arrows etc on Roads in two coats on n 0.00 0.00

ew
work with ready mixed road marking paint confirming to I.S.
164 on Bituminous surface including cleaning the surface of
all
dirt, dust and other foreign matter, demarcation at site and
traffic control (Over 10cm wide) (MORTH 803) New Surface
Painting Line, Dashes, Arrows etc on Roads in two coats on n 0.00 0.00
ew
work with ready mixed road marking paint confirming to I.S.
164 on Bituminous surface including cleaning the surface of
all
dirt, dust and other foreign matter, demarcation at site and
traffic control (Upto 10cm wide) (MORTH 803) New Surface

Painting Line, Dashes, Arrows etc on Roads in two coats on n 0.00 0.00

ew
work with ready mixed road marking paint confirming to I.S.
164 on Bituminous surface including cleaning the surface of
all
dirt, dust and other foreign matter, demarcation at site and
traffic control (Upto 10cm wide) (MORTH 803)   Old Surface
Supplying & Fixing of Molded Shank Raised Pavement Mark 0.00 0.00
ers /
Cat's Eye made of polycarbonate and ABS moulded body an
d
reflective panels with micro prismatic lens capable of providi
ng
total internal reflection of the light entering the lens face an
d
shall support a load of 16000 kg tested in accordance to AST
M
D 4280 Type H and complying to Specifications of Category A
of MORTH Circular No RW/NH/33023/10
97 ? DO III Dt 11.06.
1997. The height, width and length shall not exceed 50 mm,
100 mm and 102 +/  2 mm and with minimum reflective area
of 13 Sqcm on each side and the slope to the base shall be 3
5 +/  5 degree. The strength of detachment of the integrated
cylindrical shanks, (of diameter not less than 19 +/  2 mm an
d height not less than 30+/  2 mm) from the body is to be a
minimum value of 500 Kgf. Fixing will be by drilling holes on
the road for the shanks to go inside, without nails and using
epoxy  resin  based  adhesive  as  per  manufacturer?s
recommendation and complete as directed by the engineer.
Providing and Fixing of Median Marker that are made of tou 0.00 0.00
gh, high  impact  resistant,  injection molded,  thermoplastic
body with  an  isosceles  trapezoidal  structure  of  length,
width  and
height not less than 15cm, 10cm and 10cm respectively and
thickness  not  less  than  1.8mm,  the  body  structure  shall
be rounded  at  its  acute  angle,  all  the  corners  and
edges.  The plastic  used  for  molding  the  Median  Marker
shall  have  a
minimum Notched Izod Impact strength value of 600 J/m at
room temperature, when tested in accordance with ASTM D
256
and shall retain at least 70% of this value when subjected to
accelerated  weathering  for  1000hrs  as  per  ASTM  G155
or
UL746C. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The
Median Marker shall have rectangular
shaped, fluorescent yellow color retro
reflective sheeting of size not less than 8.5cm*8.5cm and
with  fully  reflective  micro  prismatic  cube  corners  as  its
retro reflective elements as per IRC 67 2010 and ASTM D4956
type  XI  specifications  reflectivity  values.  The  retro
reflective
sheeting shall be one or both sides of the Median Marker an
d shall  be  edge  protected  with  no  exposed  edges  which
will prevent  edge  lifting,  vandalism,  sheeting  damage,
etc.  The Median  Marker  shall  be  fixed  by  a  combination
of  epoxy adhesive and grouting.
Providing and fixing Aluminum 0.00 0.00
backed flexible prismatic (AFP)
sheeting consisting Yellow colored flexible prismatic sheetin
g with non
metallic prismatic lens as Retroreflective elements and
conforming  to  ASTM  D  4956 09  Type  VI  specification  for
rebound  able  Retroreflective  sheeting.  This  flexible
prismatic
sheeting shall be of 1ft width and laminated at the back with
a
50 micron Aluminum (Al) foil with pressure sensitive adhesiv
e and  liner.  Further,  this  flexible  prismatic  sheeting  shall
have screen  printed  arrow/slant  line  pattern  in  black
color  in  a
continuous roll format. Neither AFP sheeting nor the flexible
prismatic sheeting used in it shall crack when slowly bent in
1 second  time  around  a  1/8th  inch  mandrel  after  being
conditioned for 24hrs at 0?
C and tested as per section S2.2.2. of ASTM D 4956
09. The AFP sheeting, with the liner removed, shall  be
applied  with  a  neoprene  contact  adhesive  with  a
Polychloroprene as base, viscosity of 200 450 cps and solid
content of 20 30%. Once applied, the edges of the product
shall be sealed all around with a two
part epoxy based structural adhesive  and  shall  be
extremely  resistant  to  peel off.  A  test report  from
institutes  like  ARAI/CRRI  confirming  to  above mentioned
flexibility  and  ASTM D4956 09  Type VI  retro
reflectivity performance of the flexible prismatic sheeting us
ed in  AFP  shall  be  submitted  by  the  tenderer  during
prequalification and supply of material.
Providing  Vertical  Delineator  having  wide  angle  cube   0.00 0.00
corner
micro prismatic non metallic reflective sheeting confirming t
o Type XI of ASTM D4956  09 with White Color and Red Color
combination and having minimum of retro reflective expose
d
area of 125 Sq CM on top slots & 35 Sq CM on bottom slots
and  no  edges  shall  be  exposed  for  tampering.  This
tubular
delineator shall have a core and shell construction, shell shal
l be made  of  tough,  high  impact  resistant,  injection
molded, thermoplastic  outer  body  &  the  inner  core  shall
consist  of powder  coated  or  painted  Mild  steel  of
minimum  thickness 1.0mm.& core
shell structure shall be of height not less than
800 mm above the ground and width not less than 80 mm. T
he
metallic core of the delineator shall extend 300mm beyond t
he shell  length  from  bottom  for  installing  in  the  ground.
The
extended portion shall have slots to insert anchoring rods fo
r
enhancing the concrete grip. The logo of the manufacturer s
hall
be embossed on either side of the body in the injection mol
ding process.  The  engineering  thermoplastic  used  for
making  the delineator  body  shall  have  minimum  initial
mechanical
properties of 600J/m tested in accordance with ASTM D256
and
shall retain at least 70% of these minimum initial values whe
n
subjected to accelerated weathering for 1000hrs as per AST
M G155  or  UL  746C  and  as  per  IRC  79  specifications
and
including fixing the unit in M20 Grade Cement Concrete of Si
ze 30x30x40 cm including excavation for pit.
Supplying  of  Solar  Raised  Pavement  Markers  made  of 0.00 0.00
polycarbonate molded body with circular shape, solar power
ed,
LED self illumination in active mode, 360 degree illumination
and  reflective  panels  with  micro  prismatic  lens  capable
of
providing total internal reflection of the light entering the le
ns
face in passive mode. The marker shall support a load of 200
00
kg tested in accordance to ASTM D 4280. The marker should
be
resistant to dust and water ingress according to IP 65 standar
ds
and should withstand temperatures in the range of 0 C to 70
C.
Color of lighting could be provided in red or yellow (amber)
as
per requirement and typical frequency of blinking is 1 Hz. Th
ere should be current losses of less than 20 micro
amperes at 2.4 V in sleep
charging mode to enhance the life of the marker and a full
charge  should  provide  for  a  minimum  autonomy  of  50
hours. The height, width and length of the marker shall not
be less  than  10  mm  x  100  mm  x  100  mm.  Also,  the
surface diameter  of  the  marker  shall  not  be  less  than
100  mm
respectively. The weight of the marker shall not exceed 0.5
Kilograms. Fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy resin base
d adhesive and complete as directed by the engineer.

Fixing in position Cautionary/ Mandatory sign boards in grou 0.00 0.00

nd with C C 1:4:8 block of 60cm x 60cm x 75cm size
etc. complete as directed including all leads.

Fixing in position Road Junction/ Informatory Sign Board in 0.00 0.00

ground with C.C.1:4:8 block of 60cm x 60cm x 75cm
size including all leads complete.

Supplying precast conventional reflective delinators on 0.00 0.00

four sides for road signs MORTH 806 Number 246 84
Providing and fixing including conveyance charges upto a 0.00 0.00
distance of 200 Km. precast concrete post delinators, post of
size 130 x 90 x 1300 milimetre consisting of 4 B.T. wires with
14,000 Kg/cm2 C.C. M
20 grade 16mm dia. hold fast, including
excavation & C.C. 1:4:8 foundation block, oil painting post wi
th 3 coats and Red fluorescent tape 75 x 75mm and
white
floursent border 20mm wide around the red tape on all the f
our
sides with necessary adhesive and lamination etc. complete.

Road Delineators: Supplying and installation of 0.00 0.00

delineators (Roadway Indicators, Hazard markers, Object
markers) 80 to
100 cm high above ground level, painted black and white in
15
cm wide strips, fitted with 80x100mm rectangular or 75mm
dia.
Circular reflectorised panels at the top, buried or pressed int
o the ground and confirming to I.R.C. 79 and the drawings

Providing and fixing reflective fluorescent tape on old road si 0.00 0.00

gn
board including cleaning / scraping and painting existing boa
rd etc. complete

Road Marking with Hot Applied Thermoplastic Compound w 0.00 0.00

ith
Reflectorizing Glass Beads on Bituminous Surface  Providing
and
laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorizing glass beads @ 250 gms per sqm area,
thickness of 2.5 mm is exclusive of surface applied glass bea
ds
as per IRC:35 .The finished surface to be level, uniform and fr
ee from streaks and holes.complete.
Supplying rolled steel channel post of 100 x 50 mm (ISMC) 0.00 0.00
drilled on top and painted with one coat of epoxy primer an
d
two coats of epoxy finish paint having black and white band
s of 25  cm  last  part  of  the  post  0.75  m  below  ground
level  is
painted with three coats of red lead paint with 2 nos. of high
tensile G.I. bolt and nut of size 10 mm Dia. of 25 mm long
including transportation etc. complete. Spec. No. : As per IRC
67, & M.O.R.T. & H. Circular No. RW/NH 33023/31/88 D.O.III
Dated 2 5 1994

Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 m 0.00 0.00

m
drilled on top and painted with one coat of epoxy primer an
d
two coats of epoxy finish paint having black and white band
s of 25 cm, last part of the post 0.75 m below ground level is
painted with three coats of red lead paint with 2 nos. of high
tensile G.I. bolt and nut of size 10 mm dia. of 25 mm long
including transportation etc. complete. Spec. No. : As per IRC
67, & M.O.R.T. & H. Circular No. RW/NH 33023/31/88 D.O.III
Dated 2 5 1994

Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 m 0.00 0.00

m
duly painted with one coat of red oxide paint and two coats
of
synthetic enamel finish paint having black and white bands
of
25 cm width including 2 nos of G.I. bolt and nut of size 10 m
m
dia. And 20 mm long including transportation etc. complete.
Spec. No. : As per IRC
67, & M.O.R.T. & H. Circular No. RW/NH33023/31/88 D.O.III
Dated 2 5 1994
Supplying M.S. Angle iron post of size 50 mm x 50 mm x 5 m 0.00 0.00
m
duly painted with one coat of red oxide paint and two coats
of
synthetic enamel finish paint having black and white bands
of
25 cm width including 2 nos of G.I. bolt and nut of size 10 m
m
dia. and 20 mm long including transportation etc. complete.
Spec. No. : As per IRC
67, & M.O.R.T. & H. Circular No. RW/NH33023/31/88 D.O.III
Dated 2 5 1994

Supplying M.S. Angle iron frame for informatory sign boards 0.00 0.00

of
size 35 mm x 35 mm x 3 mm welded and making neccesary
holes required for fixing and painted with one coat of epoxy
primer and two coats epoxy finish paint etc. complete.Spec.
No. : As per IRC
67, & M.O.R.T. & H. Circular No. RW/NH33023/31/88 D.O.III
Dated 2 5 1994

Providing and constructing Information Pillar of Brick Mason 0.00 0.00

ry
in C.M. 1:6 of size 2.0 m x 0.23m x 1.0 m with base pedestal
of
size 2.3 m x 0.35 m x 0.45 m (0.3 m above ground), excavtion
in ground upto 0.4 m, laying 0.15 m thick 80 mm soling,0.10
m thick c.c. 1:3:6, finishing the pedestal and pillar in cement
plaster 12 mm thick in C.M. 1:5 and finishing the pillar with
neat cement finish ,applying flat oil paint of approved colour
in two coats, including curing, finishing etc complete.
(In Strata
other than B.C. Soil) Spec. No. :As directed by Engineer
incharge.
Providing and constructing Information Pillar of Brick Mason 0.00 0.00
ry
in C.M. 1:6 of size 2.0 m x 0.23 m x 1.0 m with base pedestal
of size 2.3 m x 0.35 m x 0.45 m (0.3 m above ground),
excavtion in ground upto 0.52 m, laying 0.15 m thick 80 mm
soling, 0.10 m thick c.c. 1:3:6, finishing the pedestal and pilla
r in cement plaster 12 mm thick in C.M. 1:5 and finishing the
pillar with neat cement finish, applying flat oil paint of
approved colour in two coats, including curing, finishing etc
complete.(In B.C. Soil with 12 mm thick R.C.C. raft in M 15,
including reinforcement) Spec. No. :As directed by Engineer
incharge.

Providing and fixing steel pipe delineators of 10 cm. in diam 0.00 0.00

eter
and total height of 130 cm, provided with 2 strips of white
retroreflective sheeting of size 5 cm. x 32.5 cm. each fixed
horizontally  and  2  strips  of  red  retroreflective  sheeting
each
having size 5 cm. x 32.5 cm. fixed horizontally at top, with
M.S. round cap having diameter 11 cm. and wire mesh at to
p
(10 guage thick) and height of wire mesh 15 cm, M.S. hold fa
st
6 mm thick with 35 cm. in length, fixing the delineators in C.
C. 1:4:8 concrete block of size 25 cm. x 25 cm. x 45 cm. with
necessary excavation etc. complete.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 600 mm dia made out of 1.5mm aluminum
sheet bonded with white retro reflective sheeting of Class B
( Type  IV  High  intensity  micro prismatic  grade  sheeting
HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3 supported on one no. of M. S. angle iron post of size 65
mm X 65 mm X 6 mm, 3.45 m long, duly painted with with fl
at
oil paint having alternate black and white bands of 25 cm wi
dth including  G.I.  fixtures  etc;  fixing  the  boards  in  M25
grade concrete  block  of  size  60cm  X  60cm  X  75cm
including
transportation etc; complete. Class B ( Type IV High intensity
micro prismatic grade sheeting HIP) shall have 7 years written
warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 600 mm dia made  out  of  3mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class B ( Type IV High intensity micropr
ismatic  grade  sheeting HIP)  having  pressure  sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 600 mm dia made out of 1.5mm aluminum
sheet bonded with white retro reflective sheeting of Class C (
Type  XI  Micro  prismatic  grade  sheeting)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  10  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 600 mm dia made out of 3mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective  specified  back  ground,  border  and
back  side retoreflctive  symbols,  letters,  numerals,  arrow
as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 10 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 750 mm dia made  out  of  2mm
aluminum
sheet bonded with white retro reflective sheeting of Class B
( Type  IV  High  intensity  micro prismatic  grade  sheeting
HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3 supported on one no. of M. S. angle iron post of size 65
mm X 65 mm X 6 mm, 3.45 m long, duly painted with with fl
at
oil paint having alternate black and white bands of 25 cm wi
dth including  G.I.  fixtures  etc;  fixing  the  boards  in  M25
grade concrete  block  of  size  60cm  X  60cm  X  75cm
including
transportation etc; complete. Class B ( Type IV High intensity
micro prismatic grade sheeting HIP) shall have 7 years written
warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 750 mm dia made  out  of  4mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class B ( Type IV High intensity micropr
ismatic  grade  sheeting HIP)  having  pressure  sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 750 mm dia made  out  of  2mm
aluminum
sheet bonded with white retro reflective sheeting of Class C (
Type  XI  Micro  prismatic  grade  sheeting)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
shall have 10 years written warranty from the manufacturer
& authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 750 mm dia made out of 4mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective  specified  back  ground,  border  and
back  side retoreflctive  symbols,  letters,  numerals,  arrow
as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 900 mm dia made  out  of  2mm
aluminum
sheet bonded with white retro reflective sheeting of Class B
( Type  IV  High  intensity  micro prismatic  grade  sheeting
HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3 supported on one no. of M. S. angle iron post of size 65
mm X 65 mm X 6 mm, 3.45 m long, duly painted with with fl
at
oil paint having alternate black and white bands of 25 cm wi
dth including  G.I.  fixtures  etc;  fixing  the  boards  in  M25
grade concrete  block  of  size  60cm  X  60cm  X  75cm
including
transportation etc; complete. Class B ( Type IV High intensity
micro prismatic grade sheeting HIP) shall have 7 years written
warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 900 mm dia made  out  of  4mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class B ( Type IV High intensity micropr
ismatic  grade  sheeting HIP)  having  pressure  sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 900 mm dia made  out  of  2mm
aluminum
sheet bonded with white retro reflective sheeting of Class C (
Type  XI  Micro  prismatic  grade  sheeting)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
shall have 10 years written warranty from the manufacturer
& authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in circular shape of 900 mm dia made out of 4mm
aluminum composite  material  (  ACM)  sheet  bonded  with
white  retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective  specified  back  ground,  border  and
back  side retoreflctive  symbols,  letters,  numerals,  arrow
as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 1200 mm dia made out of 2mm aluminum
sheet bonded with white retro reflective sheeting of Class B
( Type  IV  High  intensity  micro prismatic  grade  sheeting
HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3 supported on one no. of M. S. angle iron post of size 65
mm X 65 mm X 6 mm, 3.45 m long, duly painted with with fl
at
oil paint having alternate black and white bands of 25 cm wi
dth including  G.I.  fixtures  etc;  fixing  the  boards  in  M25
grade concrete  block  of  size  60cm  X  60cm  X  75cm
including
transportation etc; complete. Class B ( Type IV High intensity
micro prismatic grade sheeting HIP) shall have 7 years written
warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 1200 mm dia made out of 4mm aluminum
composite  material  (  ACM)  sheet  bonded  with  white
retro
reflective sheeting of Class B ( Type IV High intensity micropr
ismatic  grade  sheeting HIP)  having  pressure  sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 1200 mm dia made out of 2mm aluminum
sheet bonded with white retro reflective sheeting of Class C (
Type  XI  Micro  prismatic  grade  sheeting)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
shall have 10years written warranty from the manufacturer
& authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Mandatory/Regulatory  sign  boards   0.00 0.00
in
circular shape of 1200 mm dia made out of 4mm aluminum
composite  material  (  ACM)  sheet  bonded  with  white
retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective  specified  back  ground,  border  and
back  side retoreflctive  symbols,  letters,  numerals,  arrow
as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  600  mm  made  out  of  1.5mm
aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro
prismatic grade sheetingHIP)  having  pressure
sensitive/heat  activated  adhesive retoreflective  specified
back  ground,  border  and  back  side retoreflctive  symbols,
letters,  numerals,  arrow  as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  600  mm  made  out  of  3mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  600  mm  made  out  of  1.5mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) s
hall have  10  years  written  warranty  from  the
manufacturer  & authorised  distributor/convertor  issued
for  field  performance
including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  600  mm  made  out  of  3mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. ClassC ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  750  mm  made  out  of  2mm
aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro
prismatic grade sheetingHIP)  having  pressure
sensitive/heat  activated  adhesive retoreflective  specified
back  ground,  border  and  back  side retoreflctive  symbols,
letters,  numerals,  arrow  as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  750  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  750  mm  made  out  of  2mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
shall have 10 years written warranty from the manufacturer
& authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  750  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral Triangle size of 900 mm out of 2mm aluminum sh
eet
bonded with white retro reflective sheeting of Class B ( Type
IV High  intensity  micro prismatic  grade  sheeting HIP)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  900  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  900  mm  made  out  of  2mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) s
hall have  10  years  written  warranty  from  the
manufacturer  & authorised  distributor/convertor  issued
for  field  performance
including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  900  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  1200  mm  made  out  of  2mm
aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro
prismatic grade sheetingHIP)  having  pressure
sensitive/heat  activated  adhesive retoreflective  specified
back  ground,  border  and  back  side retoreflctive  symbols,
letters,  numerals,  arrow  as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  1200  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  1200  mm  made  out  of  2mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) s
hall have  10  years  written  warranty  from  the
manufacturer  & authorised  distributor/convertor  issued
for  field  performance
including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Equilateral  Triangle  size  of  1200  mm  made  out  of  4mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. ClassC ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 750 mm made out of 2mm aluminum sheet
bonded with white retro reflective sheeting of Class B ( Type
IV High  intensity  micro prismatic  grade  sheeting HIP)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 750 mm size of 750 mm made out of 4mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 750 mm size of 750 mm made out of 2mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
shall have 10 years written warranty from the manufacturer
& authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 750 mm size of 750 mm made out of 4mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 900 mm out of 2mm aluminum sheet bond
ed
with white retro reflective sheeting of Class B ( Type IV High
intensity  micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals, arrow as per IRC:67
2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I
.
fixtures etc; fixing the boards in M25 grade concrete block of
size  60cm  X  60cm  X  75cm  including  transportation  etc;
complete. Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)  shall  have  7  years  written
warranty  from  the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone  size  of  900  mm  made  out  of  4mm  aluminum
composite  material  (  ACM)  sheet  bonded  with  white
retro
reflective sheeting of Class B ( Type IV High intensity micropr
ismatic  grade  sheeting HIP)  having  pressure  sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class B ( Type I
V High intensity micro prismatic grade sheeting
HIP) shall have 7 years  written  warranty  from  the
manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone size of 900 mm made out of 2mm aluminum sheet
bonded with white retro reflective sheeting of Class C ( Type
XI
Micro prismatic grade sheeting) having pressure sensitive/he
at
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3 supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long,
duly painted with with flat oil paint having alternate black a
nd
white bands of 25 cm width including G.I. fixtures etc; fixing
the boards in M25 grade concrete block of size 60cm X 60cm
X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  Cautionary/Warning  sign  boards  in 0.00 0.00
Octagone  size  of  900  mm  made  out  of  4mm  aluminum
composite  material  (  ACM)  sheet  bonded  with  white
retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective  specified  back  ground,  border  and
back  side retoreflctive  symbols,  letters,  numerals,  arrow
as  per
IRC:672012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and w
hite
bands of 25 cm width including G.I. fixtures etc; fixing the
boards in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class C ( Type X
I Micro  prismatic  grade  sheeting)  shall  have  10  years
written warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area less than 0.9
square meter made out of 2mm aluminum sheet bonded wit
h
white retro reflective sheeting of Class B ( Type IV High inten
sity micro prismatic  grade  sheeting HIP)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3, supported
with back support frame 25mm x 25mm x 3mm, duly painte
d on  back  side  with  two  coats  of  grey  stove  enamel
paint  &
supported on one no. mild steel angle iron post 75 mm x 75
mm x 6 mm, 3.5 mt long firmly fixed to the ground by means
of  properly  designed  foundation  with  M25  grade  cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level a
s
per approved drawing The angle iron post shall be duly paint
ed
with one coat of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25 cm widt
h including  GI  fixures  and  transportation
etc.complete.The  nut
bolts of board with angle iron post/supporting structure afte
r fixing at site has to be electrically welded. Class B ( Type IV
High  intensity  micro prismatic  grade  sheeting HIP)  sheeting
shall have 7 years written warranty from the manufacturer &
authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area less than 0.9
square meter made out of 2mm aluminum sheet bonded wit
h white  retro  reflective  sheeting  of  Class  C  (  Type  XI
Micro prismatic  grade  sheeting)  having  pressure
sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3, supported with back support
frame 25mm x 25mm x 3mm, duly painted on back side with
two coats of grey stove enamel paint & supported on one no
.
mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt lo
ng firmly  fixed  to  the  ground  by  means  of  properly
designed
foundation with M25 grade cement concrete 45 cm x 45 cm
x
60 cm, 60 cm below ground level as per approved drawing T
he
angle iron post shall be duly painted with one coat of epoxy
primer and two coats of epoxy finish paints having alternate
black and white bands of 25 cm width including GI fixures an
d
transportation etc.complete.The nut bolts of board with angl
e iron  post/supporting  structure  after  fixing  at  site  has
to  be electrically welded. Class  C  (  Type  XI  Micro
prismatic  grade
sheeting) sheeting shall have 10 years written warranty from
the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area less than 0.9
square meter made out of 4mm aluminum composite materi
al ( ACM) sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3, supported with back support frame 25mm x 25mm x 3m
m,
duly painted on back side with two coats of grey stove enam
el
paint & supported on one no. mild steel angle iron post 75
mm
x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by
means of properly designed foundation with M25 grade cem
ent
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level a
s
per approved drawing The angle iron post shall be duly paint
ed
with one coat of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25 cm widt
h including  GI  fixures  and  transportation
etc.complete.The  nut
bolts of board with angle iron post/supporting structure afte
r fixing at site has to be electrically welded. Class B ( Type IV
High  intensity  micro prismatic  grade  sheeting HIP)  sheeting
shall have 7 years written warranty from the manufacturer &
authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area less than 0.9
square meter made out of 4mm aluminum composite materi
al ( ACM) sheet bonded with white retro reflective sheeting
of Class
C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3, supported
with back support frame 25mm x 25mm x 3mm, duly painte
d on  back  side  with  two  coats  of  grey  stove  enamel
paint  &
supported on one no. mild steel angle iron post 75 mm x 75
mm x 6 mm, 3.5 mt long firmly fixed to the ground by means
of  properly  designed  foundation  with  M25  grade  cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level a
s
per approved drawing The angle iron post shall be duly paint
ed
with one coat of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25 cm widt
h including  GI  fixures  and  transportation
etc.complete.The  nut
bolts of board with angle iron post/supporting structure afte
r fixing at site has to be electrically welded. Class C ( Type XI
Micro prismatic grade sheeting) sheeting shall have 10 years
written  warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area greater than
0.9
square meter made out of 2mm aluminum sheet bonded wit
h
white retro reflective sheeting of Class B ( Type IV High inten
sity micro prismatic  grade  sheeting HIP)  having  pressure
sensitive/heat  activated  adhesive  retoreflective  specified
back ground,  border  and  back  side  retoreflctive  symbols,
letters, numerals, arrow as per IRC:67
2012 Table No 8.3, supported
with back support frame 25mm x 25mm x 3mm, duly painte
d on  back  side  with  two  coats  of  grey  stove  enamel
paint  &
supported on two no. mild steel angle iron post 75 mm x 75
mm x 6 mm, 3.5 mt long firmly fixed to the ground by means
of  properly  designed  foundation  with  M25  grade  cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level a
s
per approved drawing The angle iron post shall be duly paint
ed
with one coat of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25 cm widt
h including  GI  fixures  and  transportation
etc.complete.The  nut
bolts of board with angle iron post/supporting structure afte
r fixing at site has to be electrically welded. Class B ( Type IV
High  intensity  micro prismatic  grade  sheeting HIP)  sheeting
shall have 7 years written warranty from the manufacturer &
authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
the contractor/supplier.
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area greater than
0.9
square meter made out of 2mm aluminum sheet bonded wit
h white  retro  reflective  sheeting  of  Class  C  (  Type  XI
Micro prismatic  grade  sheeting)  having  pressure
sensitive/heat
activated adhesive retoreflective specified back ground, bord
er
and back side retoreflctive symbols, letters, numerals, arrow
as per IRC:67
2012 Table No 8.3, supported with back support
frame 25mm x 25mm x 3mm, duly painted on back side with
two coats of grey stove enamel paint & supported on two no
.
mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt lo
ng firmly  fixed  to  the  ground  by  means  of  properly
designed
foundation with M25 grade cement concrete 45 cm x 45 cm
x
60 cm, 60 cm below ground level as per approved drawing T
he
angle iron post shall be duly painted with one coat of epoxy
primer and two coats of epoxy finish paints having alternate
black and white bands of 25 cm width including GI fixures an
d
transportation etc.complete.The nut bolts of board with angl
e iron  post/supporting  structure  after  fixing  at  site  has
to  be electrically welded. Class  C  (  Type  XI  Micro
prismatic  grade
sheeting) sheeting shall have 10 years written warranty from
the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Providing  and  fixing  of  retro   reflectorised  informatory   0.00 0.00
sign
board rectangular/Square in shape having area greater than
0.9
square meter made out of 4mm aluminum composite materi
al ( ACM) sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro
prismatic grade sheeting HIP)
having pressure sensitive/heat activated adhesive retoreflec
tive specified  back  ground,  border  and  back  side
retoreflctive symbols, letters, numerals, arrow as per IRC:67
2012 Table No
8.3, supported with back support frame 25mm x 25mm x 3m
m,
duly painted on back side with two coats of grey stove enam
el
paint & supported on two no. mild steel angle iron post 75
mm
x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by
means of properly designed foundation with M25 grade cem
ent
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level a
s
per approved drawing The angle iron post shall be duly paint
ed
with one coat of epoxy primer and two coats of epoxy finish
paints having alternate black and white bands of 25 cm widt
h including  GI  fixures  and  transportation
etc.complete.The  nut
bolts of board with angle iron post/supporting structure afte
r fixing at site has to be electrically welded. Class B ( Type IV
High  intensity  micro prismatic  grade  sheeting HIP)  sheeting
shall have 7 years written warranty from the manufacturer &
authorised  distributor/convertor  issued  for  field
performance including the screen printed areas and cut
out sheeting and cutout durable transparent overlay film an
d this warranty certificate
in original should be submitted to the Engineer in charge by
Providing  and  erecting  Overhead  signs  made  out  of   0.00 0.00
2mm
aluminum sheet bonded with white retro reflective sheeting
of Class  C  (  Type  XI  Micro  prismatic  grade  sheeting)
having
pressure sensitive/heat activated adhesive retoreflective spe
cified
back ground, border and back side retoreflctive symbols, lett
ers, numerals,  arrow  as  per  IRC:67 2012,  with  designed
back support  frame  of  mild  steel  angle  with  vertical  and
lateral
clearance given in clause 801 & 802, duly painted on back si
de
with two coats of grey stove enamel paint and installed as p
er
clause 802.6 over designed support system of structural stee
l
work trestles and trusses of sections and type as per structur
al
design requirements and approved plans including painting
with one  coat  of  epoxy  primer  and  two  coats  of  epoxy
finish
paint.The nut bolts of board with angle iron post/supporting
structure after fixing at site has to be electrically welded. Cla
ss C
( Type XI Micro prismatic grade sheeting) sheeting shall have
10 years  written  warranty  from  the  manufacturer  &
authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.This  item  does  not  include  the
cost  of structural steel work required for support system.
Providing  and  erecting  Overhead  signs  made  out  of   0.00 0.00
4mm
aluminum composite material ( ACM) sheet bonded with wh
ite retro  reflective  sheeting  of  Class  B  (  Type  IV  High
intensity micro prismatic  grade  sheeting HIP)  having
pressure sensitive/heat  activated  adhesive  retoreflective
specified  back ground,  border  and  back  side  retoreflctive
symbols,  letters, numerals,  arrow  as  per  IRC:67 2012,
with  designed  back support  frame  of  mild  steel  angle
with  vertical  and  lateral
clearance given in clause 801 & 802, duly painted on back si
de
with two coats of grey stove enamel paint and installed as p
er
clause 802.6 over a designed support system of structural st
eel
work trestles and trusses of sections and type as per structur
al
design requirements and approved plans including painting
with one  coat  of  epoxy  primer  and  two  coats  of  epoxy
finish
paint.The nut bolts of board with angle iron post/supporting
structure after fixing at site has to be electrically welded. Cla
ss B ( Type IV High intensity micro prismatic grade sheeting
HIP) sheeting  shall  have  7  years  written  warranty  from
the
manufacturer & authorised distributor/convertor issued for
field performance  including  the  screen  printed  areas  and
cut out sheeting and cut
out durable transparent overlay film and this warranty
certificate  in  original  should  be  submitted  to  the
Engineer in charge by the contractor/supplier.This item does
not include the cost of structural steel work required for sup
port system.
Providing  and  erecting  Overhead  signs  made  out  of   0.00 0.00
4mm
aluminum composite material ( ACM) sheet bonded with wh
ite
retro reflective sheeting of Class C ( Type XI Micro prismatic
grade  sheeting)  having  pressure  sensitive/heat  activated
adhesive retoreflective specified back ground, border and ba
ck side  retoreflctive  symbols,  letters,  numerals,  arrow  as
per IRC:67
2012, with designed back support frame of mild steel
angle with vertical and lateral clearance given in clause 801
&
802, duly painted on back side with two coats of grey stove
enamel paint and installed as per clause 802.6 over a design
ed
support system of structural steel work trestles and trusses
of sections  and  type  as  per  structural  design
requirements  and approved  plans  including  painting  with
one  coat  of  epoxy
primer and two coats of epoxy finish paint.The nut bolts of
board with angle iron post/supporting structure after fixing
at site  has  to  be  electrically  welded.  Class  C  (  Type  XI
Micro
prismatic grade sheeting) sheeting shall have 10 years writte
n warranty  from  the  manufacturer  &  authorised
distributor/convertor issued for field performance including
the screen printed areas and cut out sheeting and cut
out durable
transparent overlay film and this warranty certificate in origi
nal should  be  submitted  to  the  Engineer  in  charge  by
the contractor/supplier.This  item  does  not  include  the
cost  of structural steel work required for support system.
Providing  and  fixing  board  displaying  information,  such   0.00 0.00
as 'Name  of  work,  Tender  cost,  Name  of  Contractor,
Work
completion and liability period etc', having rectangular shap
e of
1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild
steel  sheet  painted  with  one  coat  of  Zinc  chromate
stoving
primer and two coats of enamel paint on front side and grey
stove enamel on back side and border / messages / symbols
etc. with approved colour shade paint complete, on M.S.ang
le
of size 35 x 35 x 3 mm frame with properly cross braced M.S.
angles of size 35mmx35mmx3mm duly painted including Tw
o
M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m
long painted with alternate black and white bands of 25 cm
width including all fixtures etc.and fixing the boards in 1:4:8
concrete block of size 60 cm x 60 cm x 75 cm including,
excavation, refilling, transportation, and labour etc complete
. Spec. No. As directed by Engineer in Charge

Providing and fixing R.C.C. precast cement concrete M 15 1301.00 210.00 0

pedestal OF SIZE 0.75 X 0.75 X 0.20 m including cost of steel
reinforcement for Km. stone as per detailed drawing
and
specification including transportation of pedestal Block, all li
fts etc. complete. Spec. No. : As directed by Engineer in
charge.

2012 April Downer - BRP Road Patch Presentation
No ratings yet
2012 April Downer - BRP Road Patch Presentation
40 pages
E DSR 03 06 2025
No ratings yet
E DSR 03 06 2025
332 pages
Bridge Levels
No ratings yet
Bridge Levels
11 pages
DSR Report
No ratings yet
DSR Report
380 pages
SSR 2017 18
No ratings yet
SSR 2017 18
228 pages
Maha PWD SSR 20-21
No ratings yet
Maha PWD SSR 20-21
1,006 pages
Road Estimate076bce185
No ratings yet
Road Estimate076bce185
22 pages
ssr28 19
No ratings yet
ssr28 19
586 pages
DSR 2017-18-1
No ratings yet
DSR 2017-18-1
218 pages
Laboratory4 Rockslopestability Sem12024 25
No ratings yet
Laboratory4 Rockslopestability Sem12024 25
16 pages
Id - 227 Roshan Garden
No ratings yet
Id - 227 Roshan Garden
2 pages
GREENOCK PLOT-Layout1
No ratings yet
GREENOCK PLOT-Layout1
1 page
Box Culvert Quantities
No ratings yet
Box Culvert Quantities
5 pages
Scale
No ratings yet
Scale
21 pages
DSR Report
100% (2)
DSR Report
451 pages
Take Off Communications
No ratings yet
Take Off Communications
8 pages
Canada Buildinag Code 2010
No ratings yet
Canada Buildinag Code 2010
1 page
Cartography Is Guide Notes For Land Survey Students On Land Subdivision
No ratings yet
Cartography Is Guide Notes For Land Survey Students On Land Subdivision
5 pages
Road Final Data Mareko
No ratings yet
Road Final Data Mareko
6 pages
CHIKUPI FEEDER CH 2+000 - CH 3+000
No ratings yet
CHIKUPI FEEDER CH 2+000 - CH 3+000
1 page
Q
No ratings yet
Q
61 pages
Pit Calibration
No ratings yet
Pit Calibration
3 pages
Pemaparan Hasil Investigasi Sondir
No ratings yet
Pemaparan Hasil Investigasi Sondir
8 pages
Reporte Volumen
No ratings yet
Reporte Volumen
10 pages
Fundamentals of Surveying
No ratings yet
Fundamentals of Surveying
18 pages
Cross Section Leveling
No ratings yet
Cross Section Leveling
6 pages
Volumenes Carretera Pampallacta
No ratings yet
Volumenes Carretera Pampallacta
6 pages
TMC DSR 18-19 Corrected Main IMP
No ratings yet
TMC DSR 18-19 Corrected Main IMP
2,114 pages
DPR Dec 23
No ratings yet
DPR Dec 23
5 pages
004 SG TR
No ratings yet
004 SG TR
2 pages
Calculos Marshall
No ratings yet
Calculos Marshall
7 pages
SPL JULI SEADAS - NC
No ratings yet
SPL JULI SEADAS - NC
44 pages
Survey
100% (1)
Survey
89 pages
Survey Note 2078 - Piyush
No ratings yet
Survey Note 2078 - Piyush
52 pages
Utilities Mixer
No ratings yet
Utilities Mixer
1 page
5025 MH PD Tidco Sud Up 001
No ratings yet
5025 MH PD Tidco Sud Up 001
1 page
1 Oleoducto 30 NT - VC
No ratings yet
1 Oleoducto 30 NT - VC
18 pages
Evaluacion de Yacimientos
No ratings yet
Evaluacion de Yacimientos
18 pages
Rre Je Je1 A01 NSP Acm CH RDS A0 DWG 00563
No ratings yet
Rre Je Je1 A01 NSP Acm CH RDS A0 DWG 00563
1 page
Lec3 Mapping & Scale
No ratings yet
Lec3 Mapping & Scale
18 pages
Kpi's de Vias - 24-06 Rev1
No ratings yet
Kpi's de Vias - 24-06 Rev1
61 pages
Well Geometry
No ratings yet
Well Geometry
12 pages
EXPLACO1
No ratings yet
EXPLACO1
1 page
Technical Data
No ratings yet
Technical Data
19 pages
Assignment 1 1
No ratings yet
Assignment 1 1
1 page
7 - Proposed Land Use Combined...
No ratings yet
7 - Proposed Land Use Combined...
1 page
DSR 2017-18 (Road & Bridge) .pdf-1
No ratings yet
DSR 2017-18 (Road & Bridge) .pdf-1
132 pages
Hollow PIPE MM
No ratings yet
Hollow PIPE MM
12 pages
Survey Booster
No ratings yet
Survey Booster
13 pages
Sept For Status Report Sept 24 Report, 2020
No ratings yet
Sept For Status Report Sept 24 Report, 2020
32 pages
Wall Thickness Schedules (ASME B36.10 B36.19)
No ratings yet
Wall Thickness Schedules (ASME B36.10 B36.19)
2 pages
Road Details Id 159 New Gopal Nagar
No ratings yet
Road Details Id 159 New Gopal Nagar
1 page
02 - Pavement Condition Survey
No ratings yet
02 - Pavement Condition Survey
8 pages
Kawasaki Superbikes: Z1000 A Mk.II & E
From Everand
Kawasaki Superbikes: Z1000 A Mk.II & E
Stefan R. Oehl
No ratings yet
California Bearing Ratio (Insitu) : Bsa Lab Engineering
No ratings yet
California Bearing Ratio (Insitu) : Bsa Lab Engineering
1 page
Summary of Daily Report: Location
No ratings yet
Summary of Daily Report: Location
12 pages
EAPA - Asphalt in Figures 2014
No ratings yet
EAPA - Asphalt in Figures 2014
9 pages
Interpave Concrete Block Paving
No ratings yet
Interpave Concrete Block Paving
68 pages
BG AD 2 BGGH APDC en
No ratings yet
BG AD 2 BGGH APDC en
1 page
Rate Analysis For Paving Blocks
No ratings yet
Rate Analysis For Paving Blocks
1 page
Tiger Vi Bid Tab-05!11!17
No ratings yet
Tiger Vi Bid Tab-05!11!17
12 pages
Asphalt Plant (PDL)
No ratings yet
Asphalt Plant (PDL)
9 pages
IRC Code Books
100% (1)
IRC Code Books
2 pages
C.G.S.T. in %: C.G.S.T. in %: S.G.S.T. in %: S.G.S.T. in %
No ratings yet
C.G.S.T. in %: C.G.S.T. in %: S.G.S.T. in %: S.G.S.T. in %
35 pages
Foc July 2018
No ratings yet
Foc July 2018
72 pages
Data Collection Format 1-Version 4.0 (Barwala Matloda Sandlana) 31052020
No ratings yet
Data Collection Format 1-Version 4.0 (Barwala Matloda Sandlana) 31052020
17 pages
PMD Road KM 25.0-26.4
No ratings yet
PMD Road KM 25.0-26.4
69 pages
Daftar Upah Bahan Keru
No ratings yet
Daftar Upah Bahan Keru
4 pages
KMS Jurnal
No ratings yet
KMS Jurnal
8 pages
Art Tile Mosaics
100% (1)
Art Tile Mosaics
18 pages
Chapter 601 - Pavement Design
No ratings yet
Chapter 601 - Pavement Design
26 pages
Hot Mix Asphalt For Intersections For Hot Climate
100% (1)
Hot Mix Asphalt For Intersections For Hot Climate
17 pages
Portland Cement Association
No ratings yet
Portland Cement Association
10 pages
CRM Empirical Pavement Design TRA2020
No ratings yet
CRM Empirical Pavement Design TRA2020
11 pages
Tanroads Regional Manager's Office - Iringa
No ratings yet
Tanroads Regional Manager's Office - Iringa
9 pages
Visual Assessement of Flexible Pavement Zarikh
No ratings yet
Visual Assessement of Flexible Pavement Zarikh
25 pages
Badshah Khalra Work Rates BC Work
No ratings yet
Badshah Khalra Work Rates BC Work
6 pages
June D0 41
No ratings yet
June D0 41
1 page
RCCP Conc - Breakup
No ratings yet
RCCP Conc - Breakup
1 page
Conc. of Road Brgy. SAYING To SAYING ELEM SCHL. - March 30
No ratings yet
Conc. of Road Brgy. SAYING To SAYING ELEM SCHL. - March 30
9 pages
Rubber Boy's
No ratings yet
Rubber Boy's
14 pages
QTB Asphalt
No ratings yet
QTB Asphalt
4 pages
An Example Diagram of A Basic Medium To Heavy Duty Road Pavement
No ratings yet
An Example Diagram of A Basic Medium To Heavy Duty Road Pavement
8 pages